From: John Crispin Date: Thu, 3 Apr 2014 14:27:02 +0000 (+0000) Subject: lantiq: nand fixes X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a05356f48a232fcb19c8b845bc2e4267086a2d7a;p=openwrt%2Fstaging%2Fmans0n.git lantiq: nand fixes Signed-off-by: John Crispin SVN-Revision: 40372 --- diff --git a/target/linux/lantiq/patches-3.10/0205-lantiq-nand-lock.patch b/target/linux/lantiq/patches-3.10/0205-lantiq-nand-lock.patch new file mode 100644 index 0000000000..f82774d889 --- /dev/null +++ b/target/linux/lantiq/patches-3.10/0205-lantiq-nand-lock.patch @@ -0,0 +1,86 @@ +From patchwork Wed Apr 2 19:38:31 2014 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [OpenWrt-Devel, + 3/7] lantiq: BT Home Hub 2B support - nand driver locking +Date: Wed, 02 Apr 2014 18:38:31 -0000 +From: Ben Mulvihill +X-Patchwork-Id: 5112 +Message-Id: <1396467511.31327.41.camel@merveille.lan> +To: openwrt-devel@lists.openwrt.org + +As a result of changeset 40310, the xway nand driver +now acquires ebu_lock in the chip select function, and +holds it for the entire duration of an operation until +the chip is deselected. There is surely no longer any +need therefore also to acquire the lock in each separate +read or write function. This patch removes that code. + +Signed-off-by: Ben Mulvihill + +--- + + +--- a/drivers/mtd/nand/xway_nand.c 2014-04-01 20:14:53.072824371 +0200 ++++ b/drivers/mtd/nand/xway_nand.c 2014-04-01 21:24:52.798612391 +0200 +@@ -102,7 +102,6 @@ static void xway_cmd_ctrl(struct mtd_inf + { + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; +- unsigned long flags; + + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_CLE) +@@ -112,11 +111,9 @@ static void xway_cmd_ctrl(struct mtd_inf + } + + if (cmd != NAND_CMD_NONE) { +- spin_lock_irqsave(&ebu_lock, flags); + writeb(cmd, (void __iomem *) (nandaddr | xway_latchcmd)); + while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; +- spin_unlock_irqrestore(&ebu_lock, flags); + } + } + +@@ -129,12 +126,9 @@ static unsigned char xway_read_byte(stru + { + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_R; +- unsigned long flags; + int ret; + +- spin_lock_irqsave(&ebu_lock, flags); + ret = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA)); +- spin_unlock_irqrestore(&ebu_lock, flags); + + return ret; + } +@@ -143,26 +137,20 @@ static void xway_read_buf(struct mtd_inf + { + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_R; +- unsigned long flags; + int i; + +- spin_lock_irqsave(&ebu_lock, flags); + for (i = 0; i < len; i++) + buf[i] = ltq_r8((void __iomem *)(nandaddr | NAND_READ_DATA)); +- spin_unlock_irqrestore(&ebu_lock, flags); + } + + static void xway_write_buf(struct mtd_info *mtd, const u_char *buf, int len) + { + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; +- unsigned long flags; + int i; + +- spin_lock_irqsave(&ebu_lock, flags); + for (i = 0; i < len; i++) + ltq_w8(buf[i], (void __iomem *)nandaddr); +- spin_unlock_irqrestore(&ebu_lock, flags); + } + + static int xway_nand_probe(struct platform_device *pdev) diff --git a/target/linux/lantiq/patches-3.10/0206-lantiq-nand-lock.patch b/target/linux/lantiq/patches-3.10/0206-lantiq-nand-lock.patch new file mode 100644 index 0000000000..6e332b4bf9 --- /dev/null +++ b/target/linux/lantiq/patches-3.10/0206-lantiq-nand-lock.patch @@ -0,0 +1,137 @@ +From patchwork Wed Apr 2 19:38:52 2014 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [OpenWrt-Devel, + 4/7] lantiq: BT Home Hub 2B support - nand pci interference +Date: Wed, 02 Apr 2014 18:38:52 -0000 +From: Ben Mulvihill +X-Patchwork-Id: 5113 +Message-Id: <1396467532.31327.42.camel@merveille.lan> +To: openwrt-devel@lists.openwrt.org + +Prevents interference between the xway nand driver and pci. + +(Based on work by Simon Hayes first published on www.psidoc.com and +http://sourceforge.net/projects/hh2b4ever/) + +Signed-off-by: Ben Mulvihill + +--- + + +--- a/drivers/mtd/nand/xway_nand.c 2014-04-01 21:24:52.798612391 +0200 ++++ a/drivers/mtd/nand/xway_nand.c 2014-04-01 21:20:33.924585096 +0200 +@@ -54,8 +54,27 @@ + #define NAND_CON_CSMUX (1 << 1) + #define NAND_CON_NANDM 1 + ++#define DANUBE_PCI_REG32( addr ) (*(volatile u32 *)(addr)) ++#define PCI_CR_PR_OFFSET (KSEG1+0x1E105400) ++#define PCI_CR_PC_ARB (PCI_CR_PR_OFFSET + 0x0080) ++ + static u32 xway_latchcmd; + ++/* ++ * req_mask provides a mechanism to prevent interference between ++ * nand and pci (probably only relevant for the BT Home Hub 2B). ++ * Setting it causes the corresponding pci req pins to be masked ++ * during nand access, and also moves ebu locking from the read/write ++ * functions to the chip select function to ensure that the whole ++ * operation runs with interrupts disabled. ++ * In addition it switches on some extra waiting in xway_cmd_ctrl(). ++ * This seems to be necessary if the ebu_cs1 pin has open-drain disabled, ++ * which in turn seems to be necessary for the nor chip to be recognised ++ * reliably, on a board (Home Hub 2B again) which has both nor and nand. ++ */ ++ ++static __be32 req_mask = 0; ++ + static void xway_reset_chip(struct nand_chip *chip) + { + unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W; +@@ -86,12 +105,24 @@ static void xway_select_chip(struct mtd_ + case -1: + ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON); + ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON); ++ ++ if (req_mask) { ++ /* Unmask all external PCI request */ ++ DANUBE_PCI_REG32(PCI_CR_PC_ARB) &= ~(req_mask << 16); ++ } + spin_unlock_irqrestore(&ebu_lock, csflags); ++ + break; + case 0: + spin_lock_irqsave(&ebu_lock, csflags); ++ if (req_mask) { ++ /* Mask all external PCI request */ ++ DANUBE_PCI_REG32(PCI_CR_PC_ARB) |= (req_mask << 16); ++ } ++ + ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON); + ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON); ++ + break; + default: + BUG(); +@@ -103,6 +134,12 @@ static void xway_cmd_ctrl(struct mtd_inf + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; + ++ if (req_mask) { ++ if (cmd != NAND_CMD_STATUS) ++ ltq_ebu_w32(EBU_NAND_WAIT, 0); /* Clear nand ready */ ++ } ++ ++ + if (ctrl & NAND_CTRL_CHANGE) { + if (ctrl & NAND_CLE) + xway_latchcmd = NAND_WRITE_CMD; +@@ -115,6 +152,24 @@ static void xway_cmd_ctrl(struct mtd_inf + while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; + } ++ ++ if (req_mask) { ++ /* ++ * program and erase have their own busy handlers ++ * status and sequential in needs no delay ++ */ ++ switch (cmd) { ++ case NAND_CMD_ERASE1: ++ case NAND_CMD_SEQIN: ++ case NAND_CMD_STATUS: ++ case NAND_CMD_READID: ++ return; ++ } ++ ++ /* wait until command is processed */ ++ while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD) == 0) ++ ; ++ } + } + + static int xway_dev_ready(struct mtd_info *mtd) +@@ -157,6 +212,8 @@ static int xway_nand_probe(struct platfo + { + struct nand_chip *this = platform_get_drvdata(pdev); + unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; ++ const __be32 *req_mask_ptr = of_get_property(pdev->dev.of_node, ++ "req-mask", NULL); + const __be32 *cs = of_get_property(pdev->dev.of_node, + "lantiq,cs", NULL); + u32 cs_flag = 0; +@@ -165,6 +222,12 @@ static int xway_nand_probe(struct platfo + if (cs && (*cs == 1)) + cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1; + ++ /* ++ * Load the PCI req lines to mask from the device tree. If the ++ * property is not present, setting req_mask to 0 disables masking. ++ */ ++ req_mask = (req_mask_ptr ? *req_mask_ptr : 0); ++ + /* setup the EBU to run in NAND mode on our base addr */ + ltq_ebu_w32(CPHYSADDR(nandaddr) + | ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);