From: Christian Marangi Date: Fri, 26 Apr 2024 10:27:21 +0000 (+0200) Subject: ipq806x: drop 6.1 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a04b7cbc40a3f3d8e2b6a51a988ac9c456e6885b;p=openwrt%2Fstaging%2Fldir.git ipq806x: drop 6.1 support Drop support for ipq806x for kernel 6.1. Signed-off-by: Christian Marangi --- diff --git a/target/linux/ipq806x/config-6.1 b/target/linux/ipq806x/config-6.1 deleted file mode 100644 index 18325c0346..0000000000 --- a/target/linux/ipq806x/config-6.1 +++ /dev/null @@ -1,538 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_APQ_GCC_8084 is not set -# CONFIG_APQ_MMCC_8084 is not set -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -# CONFIG_ARCH_IPQ40XX is not set -CONFIG_ARCH_KEEP_MEMBLOCK=y -# CONFIG_ARCH_MDM9615 is not set -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -# CONFIG_ARCH_MSM8909 is not set -# CONFIG_ARCH_MSM8916 is not set -CONFIG_ARCH_MSM8960=y -CONFIG_ARCH_MSM8974=y -CONFIG_ARCH_MSM8X60=y -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_QCOM=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y -CONFIG_ARM_ATAG_DTB_COMPAT_IGNORE_MEM=y -CONFIG_ARM_CPUIDLE=y -CONFIG_ARM_CPU_SUSPEND=y -# CONFIG_ARM_CPU_TOPOLOGY is not set -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_GROUP_RELOCS=y -CONFIG_ARM_IPQ806X_FAB_DEVFREQ=y -CONFIG_ARM_KRAIT_CACHE_DEVFREQ=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -# CONFIG_ARM_QCOM_CPUFREQ_HW is not set -CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y -CONFIG_ARM_QCOM_SPM_CPUIDLE=y -# CONFIG_ARM_SMMU is not set -CONFIG_ARM_THUMB=y -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BOUNCE=y -# CONFIG_CACHE_L2X0 is not set -CONFIG_CC_HAVE_STACKPROTECTOR_TLS=y -CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5" -CONFIG_CC_NO_ARRAY_BOUNDS=y -CONFIG_CLKSRC_QCOM=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE_OVERRIDE=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_QCOM=y -CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1 -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CONTEXT_TRACKING=y -CONFIG_CONTEXT_TRACKING_IDLE=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CRC8=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DEV_QCOM_RNG=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_SHA1=y -CONFIG_CRYPTO_LIB_SHA256=y -CONFIG_CRYPTO_LIB_UTILS=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_CURRENT_POINTER_IN_TPIDRURO=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_GPIO=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEVFREQ_GOV_PASSIVE=y -# CONFIG_DEVFREQ_GOV_PERFORMANCE is not set -# CONFIG_DEVFREQ_GOV_POWERSAVE is not set -# CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND is not set -# CONFIG_DEVFREQ_GOV_USERSPACE is not set -# CONFIG_DEVFREQ_THERMAL is not set -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_OPS=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DTC=y -CONFIG_DT_IDLE_STATES=y -# CONFIG_DWMAC_GENERIC is not set -CONFIG_DWMAC_IPQ806X=y -# CONFIG_DWMAC_QCOM_ETHQOS is not set -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EXCLUSIVE_SYSTEM_RAM=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_FW_LOADER_SYSFS=y -CONFIG_GCC11_NO_ARRAY_BOUNDS=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MIGRATION=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_VDSO_32=y -CONFIG_GLOB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_CDEV=y -CONFIG_GRO_CELLS=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_SMP=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HOTPLUG_CPU=y -CONFIG_HWMON=y -CONFIG_HWSPINLOCK=y -CONFIG_HWSPINLOCK_QCOM=y -CONFIG_HW_RANDOM=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y -# CONFIG_I2C_QCOM_CCI is not set -CONFIG_I2C_QUP=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set -CONFIG_IOMMU_SUPPORT=y -# CONFIG_IPQ_APSS_PLL is not set -# CONFIG_IPQ_GCC_4019 is not set -# CONFIG_IPQ_GCC_6018 is not set -CONFIG_IPQ_GCC_806X=y -# CONFIG_IPQ_GCC_8074 is not set -# CONFIG_IPQ_LCC_806X is not set -CONFIG_IRQCHIP=y -CONFIG_IRQSTACKS=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_KMAP_LOCAL=y -CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y -CONFIG_KPSS_XCC=y -CONFIG_KRAITCC=y -CONFIG_KRAIT_CLOCKS=y -CONFIG_KRAIT_L2_ACCESSORS=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MDIO_BITBANG=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MDIO_GPIO=y -CONFIG_MDIO_IPQ8064=y -# CONFIG_MDM_GCC_9615 is not set -# CONFIG_MDM_LCC_9615 is not set -CONFIG_MEMFD_CREATE=y -# CONFIG_MFD_HI6421_SPMI is not set -CONFIG_MFD_QCOM_RPM=y -# CONFIG_MFD_SPMI_PMIC is not set -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_ARMMMCI=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_BLOCK_MINORS=16 -CONFIG_MMC_CQHCI=y -CONFIG_MMC_QCOM_DML=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -CONFIG_MMC_SDHCI_MSM=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MSM_GCC_8660=y -# CONFIG_MSM_GCC_8909 is not set -# CONFIG_MSM_GCC_8916 is not set -# CONFIG_MSM_GCC_8939 is not set -# CONFIG_MSM_GCC_8960 is not set -# CONFIG_MSM_GCC_8974 is not set -# CONFIG_MSM_GCC_8976 is not set -# CONFIG_MSM_GCC_8994 is not set -# CONFIG_MSM_GCC_8996 is not set -# CONFIG_MSM_GCC_8998 is not set -# CONFIG_MSM_GPUCC_8998 is not set -# CONFIG_MSM_IOMMU is not set -# CONFIG_MSM_LCC_8960 is not set -# CONFIG_MSM_MMCC_8960 is not set -# CONFIG_MSM_MMCC_8974 is not set -# CONFIG_MSM_MMCC_8996 is not set -# CONFIG_MSM_MMCC_8998 is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -CONFIG_MTD_NAND_QCOM=y -CONFIG_MTD_QCOMSMEM_PARTS=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_FIT_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_QCA8K=y -CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT=y -CONFIG_NET_DSA_TAG_QCA=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NLS=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=2 -CONFIG_NVMEM=y -CONFIG_NVMEM_LAYOUTS=y -CONFIG_NVMEM_QCOM_QFPROM=y -# CONFIG_NVMEM_QCOM_SEC_QFPROM is not set -# CONFIG_NVMEM_SPMI_SDAM is not set -CONFIG_NVMEM_SYSFS=y -CONFIG_NVMEM_U_BOOT_ENV=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PAGE_POOL=y -CONFIG_PAGE_SIZE_LESS_THAN_256KB=y -CONFIG_PAGE_SIZE_LESS_THAN_64KB=y -CONFIG_PAHOLE_HAS_LANG_EXCLUDE=y -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_DW=y -CONFIG_PCIE_DW_HOST=y -CONFIG_PCIE_QCOM=y -CONFIG_PCI_DEBUG=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PCS_XPCS=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLIB_LEDS=y -CONFIG_PHYLINK=y -# CONFIG_PHY_QCOM_APQ8064_SATA is not set -# CONFIG_PHY_QCOM_EDP is not set -# CONFIG_PHY_QCOM_IPQ4019_USB is not set -CONFIG_PHY_QCOM_IPQ806X_SATA=y -# CONFIG_PHY_QCOM_IPQ806X_USB is not set -# CONFIG_PHY_QCOM_PCIE2 is not set -# CONFIG_PHY_QCOM_QMP is not set -# CONFIG_PHY_QCOM_QUSB2 is not set -# CONFIG_PHY_QCOM_USB_HS_28NM is not set -# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set -# CONFIG_PHY_QCOM_USB_SS is not set -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_APQ8064 is not set -# CONFIG_PINCTRL_APQ8084 is not set -# CONFIG_PINCTRL_IPQ4019 is not set -CONFIG_PINCTRL_IPQ8064=y -# CONFIG_PINCTRL_MDM9615 is not set -CONFIG_PINCTRL_MSM=y -# CONFIG_PINCTRL_MSM8226 is not set -# CONFIG_PINCTRL_MSM8660 is not set -# CONFIG_PINCTRL_MSM8909 is not set -# CONFIG_PINCTRL_MSM8916 is not set -# CONFIG_PINCTRL_MSM8960 is not set -# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set -# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set -# CONFIG_PINCTRL_SDX65 is not set -CONFIG_PM_DEVFREQ=y -# CONFIG_PM_DEVFREQ_EVENT is not set -CONFIG_PM_OPP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_MSM=y -CONFIG_POWER_SUPPLY=y -CONFIG_PPS=y -CONFIG_PREEMPT_NONE_BUILD=y -CONFIG_PRINTK_TIME=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_QCA83XX_PHY=y -# CONFIG_QCM_DISPCC_2290 is not set -# CONFIG_QCM_GCC_2290 is not set -# CONFIG_QCOM_A53PLL is not set -CONFIG_QCOM_ADM=y -CONFIG_QCOM_BAM_DMA=y -CONFIG_QCOM_CLK_RPM=y -# CONFIG_QCOM_COMMAND_DB is not set -# CONFIG_QCOM_CPR is not set -# CONFIG_QCOM_EBI2 is not set -# CONFIG_QCOM_GENI_SE is not set -CONFIG_QCOM_GSBI=y -CONFIG_QCOM_HFPLL=y -# CONFIG_QCOM_ICC_BWMON is not set -# CONFIG_QCOM_IOMMU is not set -# CONFIG_QCOM_LLCC is not set -CONFIG_QCOM_NET_PHYLIB=y -# CONFIG_QCOM_OCMEM is not set -# CONFIG_QCOM_PDC is not set -# CONFIG_QCOM_RMTFS_MEM is not set -CONFIG_QCOM_RPMCC=y -# CONFIG_QCOM_RPMH is not set -CONFIG_QCOM_SCM=y -# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set -CONFIG_QCOM_SMEM=y -# CONFIG_QCOM_SMSM is not set -CONFIG_QCOM_SOCINFO=y -CONFIG_QCOM_SPM=y -# CONFIG_QCOM_STATS is not set -CONFIG_QCOM_TCSR=y -CONFIG_QCOM_TSENS=y -CONFIG_QCOM_WDT=y -# CONFIG_QCS_GCC_404 is not set -# CONFIG_QCS_Q6SSTOP_404 is not set -# CONFIG_QCS_TURING_404 is not set -CONFIG_RANDSTRUCT_NONE=y -CONFIG_RAS=y -CONFIG_RATIONAL=y -CONFIG_RCU_CPU_STALL_TIMEOUT=21 -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_QCOM_LABIBB is not set -CONFIG_REGULATOR_QCOM_RPM=y -# CONFIG_REGULATOR_QCOM_SPMI is not set -# CONFIG_REGULATOR_QCOM_USB_VBUS is not set -# CONFIG_REGULATOR_VQMMC_IPQ4019 is not set -CONFIG_RESET_CONTROLLER=y -# CONFIG_RESET_QCOM_AOSS is not set -# CONFIG_RESET_QCOM_PDC is not set -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -# CONFIG_SC_CAMCC_7280 is not set -# CONFIG_SC_DISPCC_7180 is not set -# CONFIG_SC_GCC_7180 is not set -# CONFIG_SC_GCC_8280XP is not set -# CONFIG_SC_GPUCC_7180 is not set -# CONFIG_SC_LPASSCC_7280 is not set -# CONFIG_SC_LPASS_CORECC_7180 is not set -# CONFIG_SC_LPASS_CORECC_7280 is not set -# CONFIG_SC_MSS_7180 is not set -# CONFIG_SC_VIDEOCC_7180 is not set -# CONFIG_SDM_CAMCC_845 is not set -# CONFIG_SDM_DISPCC_845 is not set -# CONFIG_SDM_GCC_660 is not set -# CONFIG_SDM_GCC_845 is not set -# CONFIG_SDM_GPUCC_845 is not set -# CONFIG_SDM_LPASSCC_845 is not set -# CONFIG_SDM_VIDEOCC_845 is not set -# CONFIG_SDX_GCC_65 is not set -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_MSM=y -CONFIG_SERIAL_MSM_CONSOLE=y -CONFIG_SGL_ALLOC=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -# CONFIG_SM_CAMCC_8450 is not set -# CONFIG_SM_GCC_8150 is not set -# CONFIG_SM_GCC_8250 is not set -# CONFIG_SM_GCC_8450 is not set -# CONFIG_SM_GPUCC_6350 is not set -# CONFIG_SM_GPUCC_8150 is not set -# CONFIG_SM_GPUCC_8250 is not set -# CONFIG_SM_GPUCC_8350 is not set -# CONFIG_SM_VIDEOCC_8150 is not set -# CONFIG_SM_VIDEOCC_8250 is not set -CONFIG_SOCK_RX_QUEUE_MAPPING=y -CONFIG_SOC_BUS=y -CONFIG_SOFTIRQ_ON_OWN_STACK=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_QUP=y -CONFIG_SPMI=y -# CONFIG_SPMI_HISI3670 is not set -CONFIG_SPMI_MSM_PMIC_ARB=y -# CONFIG_SPMI_PMIC_CLKDIV is not set -CONFIG_SRCU=y -CONFIG_STMMAC_ETH=y -CONFIG_STMMAC_PLATFORM=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_HWMON=y -CONFIG_THERMAL_OF=y -CONFIG_THREAD_INFO_IN_TASK=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -# CONFIG_UCLAMP_TASK is not set -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -CONFIG_USB=y -CONFIG_USB_COMMON=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZSTD_COMMON=y -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts deleted file mode 100644 index 76751910e0..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8062-wg2600hp3.dts +++ /dev/null @@ -1,743 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8062-smb208.dtsi" -#include -#include - -/ { - model = "NEC Platforms Aterm WG2600HP3"; - compatible = "nec,wg2600hp3", "qcom,ipq8062", "qcom,ipq8064"; - - memory { - device_type = "memory"; - reg = <0x42000000 0x1e000000>; - }; - - aliases { - label-mac-device = &gmac2; - - led-boot = &led_power_green; - led-failsafe = &led_power_red; - led-running = &led_power_green; - led-upgrade = &led_power_red; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&buttons_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - mode0 { - label = "mode0"; - gpios = <&qcom_pinmux 40 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - debounce-interval = <60>; - wakeup-source; - }; - - mode1 { - label = "mode1"; - gpios = <&qcom_pinmux 41 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-0 = <&leds_pins>; - pinctrl-names = "default"; - - led_power_green: power_green { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>; - }; - - led_power_red: power_red { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 35 GPIO_ACTIVE_HIGH>; - }; - - active_green { - label = "green:active"; - gpios = <&qcom_pinmux 42 GPIO_ACTIVE_HIGH>; - }; - - active_red { - label = "red:active"; - gpios = <&qcom_pinmux 38 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_green { - label = "green:wlan2g"; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy1tpt"; - }; - - wlan2g_red { - label = "red:wlan2g"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_green { - label = "green:wlan5g"; - gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "phy0tpt"; - }; - - wlan5g_red { - label = "red:wlan5g"; - gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>; - }; - - tv_green { - label = "green:tv"; - gpios = <&qcom_pinmux 46 GPIO_ACTIVE_HIGH>; - }; - - tv_red { - label = "red:tv"; - gpios = <&qcom_pinmux 36 GPIO_ACTIVE_HIGH>; - }; - - converter_green { - label = "green:converter"; - gpios = <&qcom_pinmux 43 GPIO_ACTIVE_HIGH>; - }; - - converter_red { - label = "red:converter"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -/* nand_pins are used for leds_pins, empty the node - * from ipq8064.dtsi - */ -&nand_pins { - /delete-property/ disable; - /delete-property/ pullups; - /delete-property/ hold; -}; - -&qcom_pinmux { - pinctrl-0 = <&akro_pins>; - pinctrl-names = "default"; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - buttons_pins: buttons_pins { - mux { - pins = "gpio22", "gpio24", "gpio40", - "gpio41"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - leds_pins: leds_pins { - mux { - pins = "gpio14", "gpio15", "gpio35", - "gpio36", "gpio38", "gpio42", - "gpio43", "gpio46", "gpio55", - "gpio56", "gpio57", "gpio58"; - function = "gpio"; - bias-pull-down; - }; - - akro2 { - pins = "gpio15", "gpio35", "gpio38", - "gpio42", "gpio43", "gpio46", - "gpio55", "gpio56", "gpio57", - "gpio58"; - drive-strength = <2>; - }; - - akro4 { - pins = "gpio14", "gpio36"; - drive-strength = <4>; - }; - }; - - /* - * Stock firmware has the following settings, so let's do the same. - * I don't sure why these are required. - */ - akro_pins: akro_pinmux { - akro { - pins = "gpio17", "gpio26", "gpio47"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - - reset { - pins = "gpio45"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - output-low; - }; - - gmac0_rgmii { - pins = "gpio25"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - }; -}; - -&gsbi5 { - status = "okay"; - qcom,mode = ; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0000000 0x0020000>; - read-only; - }; - - partition@20000 { - label = "MIBIB"; - reg = <0x0020000 0x0020000>; - read-only; - }; - - partition@40000 { - label = "SBL2"; - reg = <0x0040000 0x0040000>; - read-only; - }; - - partition@80000 { - label = "SBL3"; - reg = <0x0080000 0x0080000>; - read-only; - }; - - partition@100000 { - label = "DDRCONFIG"; - reg = <0x0100000 0x0010000>; - read-only; - }; - - partition@110000 { - label = "SSD"; - reg = <0x0110000 0x0010000>; - read-only; - }; - - partition@120000 { - label = "TZ"; - reg = <0x0120000 0x0080000>; - read-only; - }; - - partition@1a0000 { - label = "RPM"; - reg = <0x01a0000 0x0080000>; - read-only; - }; - - partition@220000 { - label = "APPSBL"; - reg = <0x0220000 0x0080000>; - read-only; - }; - - partition@2a0000 { - label = "APPSBLENV"; - reg = <0x02a0000 0x0010000>; - read-only; - }; - - factory: partition@2b0000 { - label = "PRODUCTDATA"; - reg = <0x02b0000 0x0030000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_factory_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_factory_6: macaddr@6 { - reg = <0x6 0x6>; - }; - - macaddr_PRODUCTDATA_c: macaddr@c { - reg = <0xc 0x6>; - }; - - macaddr_PRODUCTDATA_12: macaddr@12 { - reg = <0x12 0x6>; - }; - }; - }; - - partition@2e0000 { - label = "ART"; - reg = <0x02e0000 0x0040000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_ART_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_ART_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@320000 { - label = "TP"; - reg = <0x0320000 0x0040000>; - read-only; - }; - - partition@360000 { - label = "TINY"; - reg = <0x0360000 0x0500000>; - read-only; - }; - - partition@860000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x0860000 0x17a0000>; - }; - }; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - - qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3"; - - nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - force_gen1 = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - reg = <0x00010000 0 0 0 0>; - - ieee80211-freq-limit = <2400000 2483000>; - qcom,ath10k-calibration-variant = "NEC-Platforms-WG2600HP3"; - - nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = ; - function = LED_FUNCTION_WAN; - function-enumerator = <1>; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = ; - function = LED_FUNCTION_WAN; - function-enumerator = <2>; - default-state = "keep"; - }; - - led@2 { - reg = <2>; - color = ; - function = LED_FUNCTION_WAN; - function-enumerator = <3>; - default-state = "keep"; - }; - }; - }; - - port@2 { - reg = <2>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <1>; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <2>; - default-state = "keep"; - }; - - led@2 { - reg = <2>; - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <3>; - default-state = "keep"; - }; - }; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <1>; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <2>; - default-state = "keep"; - }; - - led@2 { - reg = <2>; - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <3>; - default-state = "keep"; - }; - }; - }; - - port@4 { - reg = <4>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <1>; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <2>; - default-state = "keep"; - }; - - led@2 { - reg = <2>; - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <3>; - default-state = "keep"; - }; - }; - }; - - port@5 { - reg = <5>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <1>; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <2>; - default-state = "keep"; - }; - - led@2 { - reg = <2>; - color = ; - function = LED_FUNCTION_LAN; - function-enumerator = <3>; - default-state = "keep"; - }; - }; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - qca,sgmii-rxclk-falling-edge; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - phy-mode = "rgmii"; - qcom,id = <1>; - mdiobus = <&mdio0>; - nvmem-cells = <&macaddr_factory_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - mdiobus = <&mdio0>; - nvmem-cells = <&macaddr_factory_6>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi deleted file mode 100644 index f306201754..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ad7200-c2600.dtsi +++ /dev/null @@ -1,487 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include - -/ { - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - ramoops@42100000 { - compatible = "ramoops"; - reg = <0x42100000 0x40000>; - record-size = <0x4000>; - console-size = <0x4000>; - ftrace-size = <0x4000>; - pmsg-size = <0x4000>; - }; - }; - - aliases { - mdio-gpio0 = &mdio0; - label-mac-device = &gmac2; - }; -}; - -&qcom_pinmux { - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - usb0_pwr_en_pin: usb0_pwr_en_pin { - mux { - pins = "gpio25"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - output-high; - }; - }; - - usb1_pwr_en_pin: usb1_pwr_en_pin { - mux { - pins = "gpio23"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - output-high; - }; - }; -}; - -&gsbi5 { - qcom,mode = ; - status = "okay"; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - label = "MIBIB"; - reg = <0x20000 0x20000>; - read-only; - }; - - partition@40000 { - label = "SBL2"; - reg = <0x40000 0x20000>; - read-only; - }; - - partition@60000 { - label = "SBL3"; - reg = <0x60000 0x30000>; - read-only; - }; - - partition@90000 { - label = "DDRCONFIG"; - reg = <0x90000 0x10000>; - read-only; - }; - - partition@a0000 { - label = "SSD"; - reg = <0xa0000 0x10000>; - read-only; - }; - - partition@b0000 { - label = "TZ"; - reg = <0xb0000 0x30000>; - read-only; - }; - - partition@e0000 { - label = "RPM"; - reg = <0xe0000 0x20000>; - read-only; - }; - - partition@100000 { - label = "fs-uboot"; - reg = <0x100000 0x70000>; - read-only; - }; - - partition@170000 { - label = "uboot-env"; - reg = <0x170000 0x40000>; - read-only; - }; - - partition@1b0000 { - label = "radio"; - reg = <0x1b0000 0x40000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_radio_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_radio_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@1f0000 { - label = "os-image"; - reg = <0x1f0000 0x400000>; - }; - - partition@5f0000 { - label = "rootfs"; - reg = <0x5f0000 0x1900000>; - }; - - defaultmac: partition@1ef0000 { - label = "default-mac"; - reg = <0x1ef0000 0x00200>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_defaultmac_8: macaddr@8 { - compatible = "mac-base"; - reg = <0x8 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@1ef0200 { - label = "pin"; - reg = <0x1ef0200 0x00200>; - read-only; - }; - - partition@1ef0400 { - label = "product-info"; - reg = <0x1ef0400 0x0fc00>; - read-only; - }; - - partition@1f00000 { - label = "partition-table"; - reg = <0x1f00000 0x10000>; - read-only; - }; - - partition@1f10000 { - label = "soft-version"; - reg = <0x1f10000 0x10000>; - read-only; - }; - - partition@1f20000 { - label = "support-list"; - reg = <0x1f20000 0x10000>; - read-only; - }; - - partition@1f30000 { - label = "profile"; - reg = <0x1f30000 0x10000>; - read-only; - }; - - partition@1f40000 { - label = "default-config"; - reg = <0x1f40000 0x10000>; - read-only; - }; - - partition@1f50000 { - label = "user-config"; - reg = <0x1f50000 0x40000>; - read-only; - }; - - partition@1f90000 { - label = "qos-db"; - reg = <0x1f90000 0x40000>; - read-only; - }; - - partition@1fd0000 { - label = "usb-config"; - reg = <0x1fd0000 0x10000>; - read-only; - }; - - partition@1fe0000 { - label = "log"; - reg = <0x1fe0000 0x20000>; - read-only; - }; - }; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb0_pwr_en_pin>; - pinctrl-names = "default"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; - - pinctrl-0 = <&usb1_pwr_en_pin>; - pinctrl-names = "default"; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_defaultmac_8 (-1)>, <&precal_radio_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_defaultmac_8 0>, <&precal_radio_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_defaultmac_8 1>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_defaultmac_8 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts deleted file mode 100644 index 6e4c9bc773..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ad7200.dts +++ /dev/null @@ -1,168 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include - -#include "qcom-ipq8064-ad7200-c2600.dtsi" - -/ { - model = "TP-Link Talon AD7200"; - compatible = "tplink,ad7200", "qcom,ipq8064"; - - aliases { - led-boot = &led_status; - led-failsafe = &led_status; - led-running = &led_status; - led-upgrade = &led_status; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - led_enable { - label = "led-enable"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - lan { - function = LED_FUNCTION_LAN; - color = ; - gpios = <&qcom_pinmux 2 GPIO_ACTIVE_HIGH>; - }; - - usb1 { - label = "blue:usb1"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - wlan5g { - label = "blue:wlan5g"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>; - }; - - usb3 { - label = "blue:usb3"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "blue:wlan2g"; - gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>; - }; - - wan_orange { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - wan_blue { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = ; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; - }; - - wlan60g { - label = "blue:wlan60g"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; - }; - - led_status: status { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio53", "gpio54", "gpio67"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio2", "gpio8", "gpio15", "gpio16", "gpio17", "gpio26", - "gpio33", "gpio55", "gpio56", "gpio66"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; -}; - -&mdio0 { - switch@10 { - ports { - port@1 { - label = "wan"; - }; - - port@2 { - label = "lan1"; - }; - - port@3 { - label = "lan2"; - }; - - port@4 { - label = "lan3"; - }; - - port@5 { - label = "lan4"; - }; - }; - }; -}; - -&pcie2 { - status = "okay"; - max-link-speed = <1>; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap148.dts deleted file mode 100644 index bd8f0d6019..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ /dev/null @@ -1,219 +0,0 @@ -#include "qcom-ipq8064-v1.0.dtsi" - -/ { - model = "Qualcomm Technologies, Inc. IPQ8064/AP-148"; - compatible = "qcom,ipq8064-ap148", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - mdio-gpio0 = &mdio0; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&flash { - partitions { - compatible = "qcom,smem-part"; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; - max-link-speed = <1>; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "qcom,smem-part"; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - /* - port@6 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - asym-pause; - }; - }; - */ - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap161.dts deleted file mode 100644 index 9d0b451f43..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ap161.dts +++ /dev/null @@ -1,254 +0,0 @@ -#include "qcom-ipq8064-v1.0.dtsi" - -/ { - model = "Qualcomm IPQ8064/AP161"; - compatible = "qcom,ipq8064-ap161", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - mdio-gpio0 = &mdio0; - }; -}; - -&qcom_pinmux { - rgmii2_pins: rgmii2-pins { - mux { - pins = "gpio27", "gpio28", "gpio29", - "gpio30", "gpio31", "gpio32", - "gpio51", "gpio52", "gpio59", - "gpio60", "gpio61", "gpio62", - "gpio2", "gpio66"; - }; - }; -}; - -&flash { - partitions { - compatible = "qcom,smem-part"; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; - max-link-speed = <1>; -}; - -&pcie2 { - status = "okay"; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "qcom,smem-part"; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - /* - port@6 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - asym-pause; - }; - }; - */ - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; - - phy3: ethernet-phy@3 { - device_type = "ethernet-phy"; - reg = <3>; - }; -}; - -&gmac0 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <0>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-asus-onhub.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-asus-onhub.dts deleted file mode 100644 index 442bcf19a6..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-asus-onhub.dts +++ /dev/null @@ -1,92 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2014 The ChromiumOS Authors - */ - -#include "qcom-ipq8064-onhub.dtsi" -#include -#include -#include - -/ { - model = "ASUS OnHub"; - compatible = "asus,onhub", "google,arkham", "qcom,ipq8064"; -}; - -&qcom_pinmux { - ap3223_pins: ap3223_pinmux { - pins = "gpio22"; - function = "gpio"; - bias-none; - }; - - i2c7_pins: i2c7_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "gsbi7"; - }; - data { - pins = "gpio8"; - bias-disable; - }; - clk { - pins = "gpio9"; - bias-disable; - }; - }; -}; - -&gsbi7 { - status = "okay"; - qcom,mode = ; -}; - -&gsbi7_i2c { - status = "okay"; - clock-frequency = <100000>; - pinctrl-0 = <&i2c7_pins>; - pinctrl-names = "default"; - - ap3223@1c { - compatible = "dynaimage,ap3223"; - reg = <0x1c>; - - pinctrl-0 = <&ap3223_pins>; - pinctrl-names = "default"; - - int-gpio = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>; - }; - - led-controller@32 { - compatible = "national,lp5523"; - reg = <0x32>; - clock-mode = /bits/ 8 <1>; - #address-cells = <1>; - #size-cells = <0>; - - led@4 { - reg = <4>; - color = ; - chan-name = "green:status"; - linux,default-trigger = "default-on"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - }; - - led@5 { - reg = <5>; - color = ; - chan-name = "blue:status"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - }; - - led@8 { - reg = <8>; - color = ; - chan-name = "red:status"; - led-cur = /bits/ 8 <0xfa>; - max-cur = /bits/ 8 <0xff>; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-c2600.dts deleted file mode 100644 index b8cb25ede0..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-c2600.dts +++ /dev/null @@ -1,126 +0,0 @@ -#include - -#include "qcom-ipq8064-ad7200-c2600.dtsi" - -/ { - model = "TP-Link Archer C2600"; - compatible = "tplink,c2600", "qcom,ipq8064"; - - aliases { - led-boot = &power; - led-failsafe = &general; - led-running = &power; - led-upgrade = &general; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - ledswitch { - label = "ledswitch"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - lan { - function = LED_FUNCTION_LAN; - color = ; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>; - }; - - usb4 { - label = "white:usb_4"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "white:usb_2"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = ; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wan_amber { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - wan_white { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>; - }; - - power: power { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - general: general { - label = "white:general"; - gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio16", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33", - "gpio53", "gpio66"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-d7800.dts deleted file mode 100644 index 8077c3a090..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-d7800.dts +++ /dev/null @@ -1,485 +0,0 @@ -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include -#include - -/ { - model = "Netgear Nighthawk X4 D7800"; - compatible = "netgear,d7800", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - rsvd@5fe00000 { - reg = <0x5fe00000 0x200000>; - reusable; - }; - }; - - aliases { - mdio-gpio0 = &mdio0; - - led-boot = &power_white; - led-failsafe = &power_amber; - led-running = &power_white; - led-upgrade = &power_amber; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - usb1 { - label = "white:usb1"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "white:usb2"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - power_amber: power_amber { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wan_white { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wan_amber { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = ; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - esata { - label = "white:esata"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - - power_white: power_white { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - wifi { - label = "white:wifi"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", - "gpio24","gpio26", "gpio53", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - usb0_pwr_en_pins: usb0_pwr_en_pins { - mux { - pins = "gpio15"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; - - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio16", "gpio68"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; -}; - -&sata_phy { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb0_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; - - pinctrl-0 = <&usb1_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&pcie0 { - status = "okay"; - reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_art_6 1>, <&precal_art_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_art_6 2>, <&precal_art_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie2 { - status = "okay"; - reset-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie2_pins>; - pinctrl-names = "default"; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x1180000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - qcadata@0 { - label = "qcadata"; - reg = <0x0000000 0x0c80000>; - read-only; - }; - - APPSBL@c80000 { - label = "APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - APPSBLENV@1180000 { - label = "APPSBLENV"; - reg = <0x1180000 0x0080000>; - read-only; - }; - - art@1200000 { - label = "art"; - reg = <0x1200000 0x0140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_art_6: macaddr@6 { - compatible = "mac-base"; - reg = <0x6 0x6>; - #nvmem-cell-cells = <1>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - artbak: art@1340000 { - label = "artbak"; - reg = <0x1340000 0x0140000>; - read-only; - }; - - kernel@1480000 { - label = "kernel"; - reg = <0x1480000 0x0400000>; - }; - - ubi@1880000 { - label = "ubi"; - reg = <0x1880000 0x6080000>; - }; - - reserve@7900000 { - label = "reserve"; - reg = <0x7900000 0x0700000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_art_6 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_art_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-db149.dts deleted file mode 100644 index 063f27c6d2..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-db149.dts +++ /dev/null @@ -1,263 +0,0 @@ -#include "qcom-ipq8064-v1.0.dtsi" - -/ { - model = "Qualcomm IPQ8064/DB149"; - compatible = "qcom,ipq8064-db149", "qcom,ipq8064"; - - aliases { - serial0 = &gsbi2_serial; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; -}; - -&qcom_pinmux { - rgmii0_pins: rgmii0_pins { - mux { - pins = "gpio2", "gpio66"; - drive-strength = <8>; - bias-disable; - }; - }; -}; - -&gsbi2 { - qcom,mode = ; - status = "okay"; - - gsbi2_serial: serial@12490000 { - status = "okay"; - }; -}; - -&gsbi4 { - status = "disabled"; -}; - -&gsbi4_serial { - status = "disabled"; -}; - -&flash { - m25p,fast-read; - - partition@0 { - label = "lowlevel_init"; - reg = <0x0 0x1b0000>; - }; - - partition@1 { - label = "u-boot"; - reg = <0x1b0000 0x80000>; - }; - - partition@2 { - label = "u-boot-env"; - reg = <0x230000 0x40000>; - }; - - partition@3 { - label = "caldata"; - reg = <0x270000 0x40000>; - }; - - partition@4 { - label = "firmware"; - reg = <0x2b0000 0x1d50000>; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; -}; - -&pcie2 { - status = "okay"; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - /* - port@6 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - pause; - asym-pause; - }; - }; - */ - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; - - phy6: ethernet-phy@6 { - reg = <6>; - }; - - phy7: ethernet-phy@7 { - reg = <7>; - }; -}; - -&gmac0 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <0>; - - pinctrl-0 = <&rgmii0_pins>; - pinctrl-names = "default"; -}; - -&gmac1 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <1>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - phy-handle = <&phy6>; -}; - -&gmac3 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <3>; - phy-handle = <&phy7>; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts deleted file mode 100644 index 2a565cc2db..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts +++ /dev/null @@ -1,120 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include - -#include "qcom-ipq8064-eax500.dtsi" - -/ { - model = "Linksys EA7500 V1 WiFi Router"; - compatible = "linksys,ea7500-v1", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0xe000000>; - device_type = "memory"; - }; - - aliases { - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - chosen { - /* look for root deviceblock nbr in this bootarg */ - find-rootblock = "ubi.mtd="; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_power: power { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio65", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; -}; - -&partitions { - partition@5f80000 { - label = "sysdiag"; - reg = <0x5f80000 0x100000>; - }; - - partition@6080000 { - label = "syscfg"; - reg = <0x6080000 0x1f80000>; - }; -}; - -&mdio0 { - switch@10 { - ports { - port@1 { - label = "wan"; - }; - - port@2 { - label = "lan1"; - }; - - port@3 { - label = "lan2"; - }; - - port@4 { - label = "lan3"; - }; - - port@5 { - label = "lan4"; - }; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts deleted file mode 100644 index d9155081a5..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts +++ /dev/null @@ -1,126 +0,0 @@ -#include - -#include "qcom-ipq8064-eax500.dtsi" - -/ { - model = "Linksys EA8500 WiFi Router"; - compatible = "linksys,ea8500", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - aliases { - mdio-gpio0 = &mdio0; - - led-boot = &led_power; - led-failsafe = &led_power; - led-running = &led_power; - led-upgrade = &led_power; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - wps { - function = LED_FUNCTION_WPS; - color = ; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - - led_power: power { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - default-state = "keep"; - }; - - wifi { - label = "green:wifi"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio65", "gpio67", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6", "gpio53", "gpio54"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; -}; - -&sata_phy { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&partitions { - partition@5f80000 { - label = "syscfg"; - reg = <0x5f80000 0x2080000>; - }; -}; - -&gmac1 { - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <1>; - qcom,rgmii_delay = <0>; - qcom,emulation = <0>; -}; - -/* LAN */ -&gmac2 { - qcom,phy_mdio_addr = <0>; /* none */ - qcom,poll_required = <0>; /* no polling */ - qcom,rgmii_delay = <0>; - qcom,emulation = <0>; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi deleted file mode 100644 index e5cc242419..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-eax500.dtsi +++ /dev/null @@ -1,317 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include - -/ { - chosen { - bootargs = "console=ttyMSM0,115200n8"; - /* append to bootargs adding the root deviceblock nbr from bootloader */ - append-rootblock = "ubi.mtd="; - }; -}; - -&qcom_pinmux { - /* eax500 routers reuse the pcie2 reset pin for switch reset pin */ - switch_reset: switch_reset_pins { - mux { - pins = "gpio63"; - function = "gpio"; - drive-strength = <12>; - bias-pull-up; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - max-link-speed = <1>; -}; - -&pcie1 { - status = "okay"; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x0c80000>; - - partitions: partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0000000 0x0040000>; - read-only; - }; - - partition@40000 { - label = "MIBIB"; - reg = <0x0040000 0x0140000>; - read-only; - }; - - partition@180000 { - label = "SBL2"; - reg = <0x0180000 0x0140000>; - read-only; - }; - - partition@2c0000 { - label = "SBL3"; - reg = <0x02c0000 0x0280000>; - read-only; - }; - - partition@540000 { - label = "DDRCONFIG"; - reg = <0x0540000 0x0120000>; - read-only; - }; - - partition@660000 { - label = "SSD"; - reg = <0x0660000 0x0120000>; - read-only; - }; - - partition@780000 { - label = "TZ"; - reg = <0x0780000 0x0280000>; - read-only; - }; - - partition@a00000 { - label = "RPM"; - reg = <0x0a00000 0x0280000>; - read-only; - }; - - art: partition@c80000 { - label = "art"; - reg = <0x0c80000 0x0140000>; - read-only; - }; - - partition@dc0000 { - label = "APPSBL"; - reg = <0x0dc0000 0x0100000>; - read-only; - }; - - partition@ec0000 { - label = "u_env"; - reg = <0x0ec0000 0x0040000>; - }; - - partition@f00000 { - label = "s_env"; - reg = <0x0f00000 0x0040000>; - }; - - partition@f40000 { - label = "devinfo"; - reg = <0x0f40000 0x0040000>; - }; - - partition@f80000 { - label = "kernel1"; - reg = <0x0f80000 0x2800000>; /* 4 MB, spill to rootfs */ - }; - - partition@1380000 { - label = "rootfs1"; - reg = <0x1380000 0x2400000>; - }; - - partition@3780000 { - label = "kernel2"; - reg = <0x3780000 0x2800000>; - }; - - partition@3b80000 { - label = "rootfs2"; - reg = <0x3b80000 0x2400000>; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - /* Switch from documentation require at least 10ms for reset */ - reset-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_HIGH>; - reset-post-delay-us = <12000>; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-fap-421e.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-fap-421e.dts deleted file mode 100644 index bb66c6c808..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-fap-421e.dts +++ /dev/null @@ -1,413 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8064-smb208.dtsi" -#include -#include - -/ { - model = "Fortinet FAP-421E"; - compatible = "fortinet,fap-421e", "qcom,ipq8064"; - - memory@42000000 { - device_type = "memory"; - reg = <0x42000000 0xe000000>; - }; - - reserved-memory { - rsvd@41200000 { - no-map; - reg = <0x41200000 0x300000>; - }; - wifi_dump@44000000 { - no-map; - reg = <0x44000000 0x600000>; - }; - }; - - aliases { - led-boot = &led_power_yellow; - led-failsafe = &led_power_yellow; - led-running = &led_power_yellow; - led-upgrade = &led_power_yellow; - label-mac-device = &gmac0; - }; - - chosen { - bootargs-override = "console=ttyMSM0,9600n8"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - eth1-amber { - label = "amber:eth1"; - gpios = <&qcom_pinmux 27 GPIO_ACTIVE_LOW>; - }; - - eth1-yellow { - label = "yellow:eth1"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - eth2-amber { - label = "amber:eth2"; - gpios = <&qcom_pinmux 29 GPIO_ACTIVE_LOW>; - }; - - eth2-yellow { - label = "yellow:eth2"; - gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>; - }; - - power-amber { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>; - }; - - led_power_yellow: power-yellow { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>; - }; - - 2g-yellow { - label = "yellow:2g"; - gpios = <&qcom_pinmux 30 GPIO_ACTIVE_LOW>; - }; - - 5g-yellow { - label = "yellow:5g"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - bias-pull-up; - drive-strength = <2>; - pins = "gpio56"; - }; - }; - - led_pins: led_pins { - mux { - bias-pull-down; - drive-strength = <2>; - function = "gpio"; - output-low; - pins = "gpio23"; - }; - }; - - rgmii2_pins: rgmii2-pins { - mux { - bias-disable; - drive-strength = <16>; - function = "rgmii2"; - pins = "gpio66"; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - uart0_pins: uart0_pins { - mux { - bias-disable; - drive-strength = <12>; - function = "gsbi7"; - pins = "gpio6", "gpio7"; - }; - }; - - usb_pwr_en_pins: usb_pwr_en_pins { - mux { - pins = "gpio22"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-low; - }; - }; -}; - -&gsbi7 { - qcom,mode = ; - - status = "okay"; -}; - -&gsbi7_serial{ - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; - - status = "okay"; -}; - -&gsbi5 { - qcom,mode = ; - - status = "okay"; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - m25p,fast-read; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - label = "MIBIB"; - reg = <0x20000 0x20000>; - read-only; - }; - - partition@40000 { - label = "SBL2"; - reg = <0x40000 0x40000>; - read-only; - }; - - partition@80000 { - label = "SBL3"; - reg = <0x80000 0x80000>; - read-only; - }; - - partition@100000 { - label = "DDRCONFIG"; - reg = <0x100000 0x10000>; - read-only; - }; - - partition@110000 { - label = "SSD"; - reg = <0x110000 0x10000>; - read-only; - }; - - partition@120000 { - label = "TZ"; - reg = <0x120000 0x80000>; - read-only; - }; - - partition@1a0000 { - label = "RPM"; - reg = <0x1a0000 0x80000>; - read-only; - }; - - partition@220000 { - label = "APPSBL"; - reg = <0x220000 0x80000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_appsbl_7ff80: mac-address@7ff80 { - compatible = "mac-base"; - reg = <0x7ff80 0xc>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@2a0000 { - label = "APPSBLENV"; - reg = <0x2a0000 0x40000>; - }; - - partition@2e0000 { - label = "ART"; - reg = <0x2e0000 0x40000>; - read-only; - }; - - partition@320000 { - label = "kernel"; - reg = <0x320000 0x600000>; - }; - - partition@920000 { - label = "ubi"; - reg = <0x920000 0x1400000>; - }; - - partition@1d20000 { - label = "reserved"; - reg = <0x1d20000 0x260000>; - read-only; - }; - - partition@1f80000 { - label = "config"; - reg = <0x1f80000 0x80000>; - read-only; - }; - }; - }; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; - - pinctrl-0 = <&usb_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_appsbl_7ff80 8>; - nvmem-cell-names = "mac-address"; - }; - }; -}; - -&pcie1 { - status = "okay"; - - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_appsbl_7ff80 16>; - nvmem-cell-names = "mac-address"; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&mdio0 { - status = "okay"; - - #address-cells = <0x1>; - #size-cells = <0x0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, - <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - - phy2: ethernet-phy@2 { - reg = <2>; - }; -}; - -&gmac0 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <0>; - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - nvmem-cells = <&macaddr_appsbl_7ff80 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - nvmem-cells = <&macaddr_appsbl_7ff80 1>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-g10.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-g10.dts deleted file mode 100644 index 24273291cb..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-g10.dts +++ /dev/null @@ -1,383 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include -#include -#include - -/ { - compatible = "asrock,g10", "qcom,ipq8064"; - model = "ASRock G10"; - - aliases { - ethernet0 = &gmac1; - ethernet1 = &gmac0; - - led-boot = &led_status_blue; - led-failsafe = &led_status_amber; - led-running = &led_status_blue; - led-upgrade = &led_status_amber; - }; - - chosen { - bootargs-override = "console=ttyMSM0,115200n8"; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - /* - * this is a bit misleading. Because there are about seven - * multicolor LEDs connected all wired together in parallel. - */ - - status_yellow { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - led_status_amber: status_amber { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - led_status_blue: status_blue { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - /* - * LED is declared in vendors boardfile but it's not - * working and the manual doesn't mention anything - * about the LED being white. - - status_white { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - */ - }; - - i2c-gpio { - #address-cells = <1>; - #size-cells = <0>; - - compatible = "i2c-gpio"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>, /* sda */ - <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; /* scl */ - i2c-gpio,delay-us = <5>; - i2c-gpio,scl-output-only; - - mcu@50 { - reg = <0x50>; - compatible = "sonix,sn8f25e21"; - }; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - ir-remote { - label = "ir-remote"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps5g { - label = "wps5g"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps2g { - label = "wps2g"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&gmac1 { - status = "okay"; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi4_serial { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x1200000>; - - partitions { - compatible = "qcom,smem-part"; - }; - }; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi5g: wifi@1,0 { - reg = <0x00010000 0 0 0 0>; - compatible = "qcom,ath10k"; - qcom,ath10k-calibration-variant = "ASRock-G10"; - }; - }; -}; - -&pcie1 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2g: wifi@1,0 { - reg = <0x00010000 0 0 0 0>; - compatible = "qcom,ath10k"; - qcom,ath10k-calibration-variant = "ASRock-G10"; - }; - }; -}; - -&qcom_pinmux { - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio26"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio15", "gpio16", "gpio64", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - uart0_pins: uart0_pins { - mux { - pins = "gpio10", "gpio11"; - function = "gsbi4"; - drive-strength = <10>; - bias-disable; - }; - }; -}; - -&rpm { - pinctrl-0 = <&i2c4_pins>; - pinctrl-names = "default"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&tcsr { - qcom,usb-ctrl-select = ; -}; - -/delete-node/ &pcie2_pins; -/delete-node/ &pcie2; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-onhub.dtsi b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-onhub.dtsi deleted file mode 100644 index 5b8de27ad6..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-onhub.dtsi +++ /dev/null @@ -1,545 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2014 The ChromiumOS Authors - */ - -#include "qcom-ipq8064-smb208.dtsi" -#include -#include -#include - -/ { - aliases { - ethernet0 = &gmac0; - ethernet1 = &gmac2; - mdio-gpio0 = &mdio; - serial0 = &gsbi4_serial; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - dev { - label = "dev"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - mdio: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, - <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&mdio_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - }; - }; - }; - - soc { - rng@1a500000 { - status = "disabled"; - }; - - sound { - compatible = "google,storm-audio"; - qcom,model = "ipq806x-storm"; - cpu = <&lpass>; - codec = <&max98357a>; - }; - - lpass: lpass@28100000 { - status = "okay"; - pinctrl-names = "default", "idle"; - pinctrl-0 = <&mi2s_default>; - pinctrl-1 = <&mi2s_idle>; - }; - - max98357a: max98357a { - compatible = "maxim,max98357a"; - #sound-dai-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&sdmode_pins>; - sdmode-gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - rgmii0_pins: rgmii0_pins { - mux { - pins = "gpio2", "gpio66"; - drive-strength = <8>; - bias-disable; - }; - }; - mi2s_pins { - mi2s_default: mi2s_default { - dout { - pins = "gpio32"; - function = "mi2s"; - drive-strength = <16>; - bias-disable; - }; - sync { - pins = "gpio27"; - function = "mi2s"; - drive-strength = <16>; - bias-disable; - }; - clk { - pins = "gpio28"; - function = "mi2s"; - drive-strength = <16>; - bias-disable; - }; - }; - mi2s_idle: mi2s_idle { - dout { - pins = "gpio32"; - function = "mi2s"; - drive-strength = <2>; - bias-pull-down; - }; - sync { - pins = "gpio27"; - function = "mi2s"; - drive-strength = <2>; - bias-pull-down; - }; - clk { - pins = "gpio28"; - function = "mi2s"; - drive-strength = <2>; - bias-pull-down; - }; - }; - }; - - mdio_pins: mdio_pins { - mux { - pins = "gpio0", "gpio1"; - function = "gpio"; - drive-strength = <8>; - bias-disable; - }; - rst { - pins = "gpio26"; - output-low; - }; - }; - - sdmode_pins: sdmode_pinmux { - pins = "gpio25"; - function = "gpio"; - drive-strength = <16>; - bias-disable; - }; - - sdcc1_pins: sdcc1_pinmux { - mux { - pins = "gpio38", "gpio39", "gpio40", - "gpio41", "gpio42", "gpio43", - "gpio44", "gpio45", "gpio46", - "gpio47"; - function = "sdc1"; - }; - cmd { - pins = "gpio45"; - drive-strength = <10>; - bias-pull-up; - }; - data { - pins = "gpio38", "gpio39", "gpio40", - "gpio41", "gpio43", "gpio44", - "gpio46", "gpio47"; - drive-strength = <10>; - bias-pull-up; - }; - clk { - pins = "gpio42"; - drive-strength = <16>; - bias-pull-down; - }; - }; - - i2c1_pins: i2c1_pinmux { - pins = "gpio53", "gpio54"; - function = "gsbi1"; - bias-disable; - }; - - rpm_i2c_pinmux: rpm_i2c_pinmux { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - /delete-property/ bias-none; - /delete-property/ drive-strength; - }; - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - cs { - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - fw_pinmux { - wp { - pins = "gpio17"; - output-low; - }; - }; - - button_pins: button_pins { - recovery { - pins = "gpio16"; - function = "gpio"; - bias-none; - }; - developer { - pins = "gpio15"; - function = "gpio"; - bias-none; - }; - }; - - spi6_pins: spi6_pins { - mux { - pins = "gpio55", "gpio56", "gpio58"; - function = "gsbi6"; - bias-pull-down; - }; - data { - pins = "gpio55", "gpio56"; - drive-strength = <10>; - }; - cs { - pins = "gpio57"; - drive-strength = <10>; - bias-pull-up; - output-high; - }; - clk { - pins = "gpio58"; - drive-strength = <12>; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&gmac0 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <0>; - - pinctrl-0 = <&rgmii0_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi1 { - status = "okay"; - qcom,mode = ; -}; - -&gsbi1_i2c { - status = "okay"; - - clock-frequency = <100000>; - - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; - powered-while-suspended; - }; -}; - -&gsbi4 { - status = "okay"; - qcom,mode = ; -}; - -&gsbi4_serial { - status = "okay"; -}; - -&gsbi5 { - status = "okay"; - qcom,mode = ; - - spi4: spi@1a280000 { - status = "okay"; - spi-max-frequency = <50000000>; - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 0>; - - flash: flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - }; - }; -}; - -&gsbi6 { - status = "okay"; - qcom,mode = ; -}; - -&gsbi6_spi { - status = "okay"; - spi-max-frequency = <25000000>; - - pinctrl-0 = <&spi6_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>; - - dmas = <&adm_dma 8 0xb>, - <&adm_dma 7 0x14>; - dma-names = "rx", "tx"; - - /* - * This "spidev" was included in the manufacturer device tree. I suspect - * it's the (unused) Zigbee radio -- SiliconLabs EM3581 Zigbee? There's - * no driver or binding for this at the moment. - */ - spidev@0 { - compatible = "spidev"; - reg = <0>; - spi-max-frequency = <25000000>; - }; -}; - -&pcie0 { - status = "okay"; - - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-controller; - - ath10k@0,0 { - reg = <0 0 0 0 0>; - device_type = "pci"; - qcom,ath10k-sa-gpio = <2 3 4 0>; - qcom,ath10k-sa-gpio-func = <5 5 5 0>; - }; - }; -}; - -&pcie1 { - status = "okay"; - - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-controller; - - ath10k@0,0 { - reg = <0 0 0 0 0>; - device_type = "pci"; - qcom,ath10k-sa-gpio = <2 3 4 0>; - qcom,ath10k-sa-gpio-func = <5 5 5 0>; - }; - }; -}; - -&pcie2 { - status = "okay"; - - pcie@0 { - reg = <0 0 0 0 0>; - #interrupt-cells = <1>; - #size-cells = <2>; - #address-cells = <3>; - device_type = "pci"; - interrupt-controller; - - ath10k@0,0 { - reg = <0 0 0 0 0>; - device_type = "pci"; - }; - }; -}; - -&rpm { - pinctrl-0 = <&rpm_i2c_pinmux>; - pinctrl-names = "default"; -}; - -&sdcc1 { - status = "okay"; - pinctrl-0 = <&sdcc1_pins>; - pinctrl-names = "default"; - /delete-property/ mmc-ddr-1_8v; -}; - -&tcsr { - compatible = "qcom,tcsr-ipq8064", "qcom,tcsr", "syscon"; - qcom,usb-ctrl-select = ; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-r7500.dts deleted file mode 100644 index c2703b05d7..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-r7500.dts +++ /dev/null @@ -1,415 +0,0 @@ -#include "qcom-ipq8064-v1.0.dtsi" - -#include -#include -#include - -/ { - model = "Netgear Nighthawk X4 R7500"; - compatible = "netgear,r7500", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0xe000000>; - device_type = "memory"; - }; - - reserved-memory { - #address-cells = <1>; - #size-cells = <1>; - ranges; - rsvd@41200000 { - reg = <0x41200000 0x300000>; - no-map; - }; - }; - - aliases { - mdio-gpio0 = &mdio0; - - led-boot = &power_white; - led-failsafe = &power_amber; - led-running = &power_white; - led-upgrade = &power_amber; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - usb1 { - label = "white:usb1"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "white:usb2"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - power_amber: power_amber { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wan_white { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wan_amber { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = ; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - esata { - label = "white:esata"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - - power_white: power_white { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - wifi { - label = "white:wifi"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", - "gpio24","gpio26", "gpio53", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; -}; - -&gsbi5 { - status = "disabled"; - - spi@1a280000 { - status = "disabled"; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; - max-link-speed = <1>; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x1180000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - qcadata@0 { - label = "qcadata"; - reg = <0x0000000 0x0c80000>; - read-only; - }; - - APPSBL@c80000 { - label = "APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - APPSBLENV@1180000 { - label = "APPSBLENV"; - reg = <0x1180000 0x0080000>; - read-only; - }; - - art: art@1200000 { - label = "art"; - reg = <0x1200000 0x0140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_art_6: macaddr@6 { - reg = <0x6 0x6>; - }; - }; - }; - - kernel@1340000 { - label = "kernel"; - reg = <0x1340000 0x0400000>; - }; - - ubi@1740000 { - label = "ubi"; - reg = <0x1740000 0x1600000>; - }; - - netgear@2d40000 { - label = "netgear"; - reg = <0x2d40000 0x0c00000>; - read-only; - }; - - reserve@3940000 { - label = "reserve"; - reg = <0x3940000 0x46c0000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_art_6>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_art_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&tcsr { - qcom,usb-ctrl-select = ; - compatible = "qcom,tcsr"; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts deleted file mode 100644 index 6c52d51ebc..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts +++ /dev/null @@ -1,477 +0,0 @@ -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include -#include - -/ { - model = "Netgear Nighthawk X4 R7500v2"; - compatible = "netgear,r7500v2", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - rsvd@5fe00000 { - reg = <0x5fe00000 0x200000>; - reusable; - }; - }; - - aliases { - mdio-gpio0 = &mdio0; - - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - usb1 { - label = "amber:usb1"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb3 { - label = "amber:usb3"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - status { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - internet { - label = "white:internet"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wan { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = ; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - esata { - label = "white:esata"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - - power: power { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - wifi { - label = "white:wifi"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23", - "gpio24","gpio26", "gpio53", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - usb0_pwr_en_pins: usb0_pwr_en_pins { - mux { - pins = "gpio15"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; - - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio16", "gpio68"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; -}; - -&sata_phy { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb0_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; - - pinctrl-0 = <&usb1_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&pcie0 { - status = "okay"; - reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_art_6 1>, <&precal_art_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_art_6 2>, <&precal_art_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x1180000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - qcadata@0 { - label = "qcadata"; - reg = <0x0000000 0x0c80000>; - read-only; - }; - - APPSBL@c80000 { - label = "APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - APPSBLENV@1180000 { - label = "APPSBLENV"; - reg = <0x1180000 0x0080000>; - read-only; - }; - - art@1200000 { - label = "art"; - reg = <0x1200000 0x0140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_art_6: macaddr@6 { - compatible = "mac-base"; - reg = <0x6 0x6>; - #nvmem-cell-cells = <1>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - artbak: art@1340000 { - label = "artbak"; - reg = <0x1340000 0x0140000>; - read-only; - }; - - kernel@1480000 { - label = "kernel"; - reg = <0x1480000 0x0400000>; - }; - - ubi@1880000 { - label = "ubi"; - reg = <0x1880000 0x6080000>; - }; - - reserve@7900000 { - label = "reserve"; - reg = <0x7900000 0x0700000>; - read-only; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_art_6 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_art_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-tplink-onhub.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-tplink-onhub.dts deleted file mode 100644 index 6adc6be4ae..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-tplink-onhub.dts +++ /dev/null @@ -1,209 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2014 The ChromiumOS Authors - */ - -#include "qcom-ipq8064-onhub.dtsi" -#include -#include -#include - -/ { - model = "TP-Link OnHub"; - compatible = "tplink,onhub", "google,whirlwind-sp5", "qcom,ipq8064"; -}; - -&qcom_pinmux { - i2c7_pins: i2c7_pinmux { - mux { - pins = "gpio8", "gpio9"; - function = "gsbi7"; - }; - data { - pins = "gpio8"; - bias-disable; - }; - clk { - pins = "gpio9"; - bias-disable; - }; - }; -}; - -&gsbi7 { - status = "okay"; - qcom,mode = ; -}; - -&gsbi7_i2c { - status = "okay"; - clock-frequency = <100000>; - pinctrl-0 = <&i2c7_pins>; - pinctrl-names = "default"; - - led-controller@32 { - compatible = "national,lp5523"; - reg = <0x32>; - clock-mode = /bits/ 8 <1>; - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = ; - chan-name = "red:status-0"; - linux,default-trigger = "default-on"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@1 { - reg = <1>; - color = ; - chan-name = "green:status-0"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@2 { - reg = <2>; - color = ; - chan-name = "blue:status-0"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@3 { - reg = <3>; - color = ; - chan-name = "red:status-1"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@4 { - reg = <4>; - color = ; - chan-name = "green:status-1"; - linux,default-trigger = "default-on"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@5 { - reg = <5>; - color = ; - chan-name = "blue:status-1"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@6 { - reg = <6>; - color = ; - chan-name = "red:status-2"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@7 { - reg = <7>; - color = ; - chan-name = "green:status-2"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@8 { - reg = <8>; - color = ; - chan-name = "blue:status-2"; - linux,default-trigger = "default-on"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - }; - - led-controller@33 { - compatible = "national,lp5523"; - reg = <0x33>; - clock-mode = /bits/ 8 <1>; - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = ; - chan-name = "red:status-3"; - linux,default-trigger = "default-on"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@1 { - reg = <1>; - color = ; - chan-name = "green:status-3"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@2 { - reg = <2>; - color = ; - chan-name = "blue:status-3"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@3 { - reg = <3>; - color = ; - chan-name = "red:status-4"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@4 { - reg = <4>; - color = ; - chan-name = "green:status-4"; - linux,default-trigger = "default-on"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@5 { - reg = <5>; - color = ; - chan-name = "blue:status-4"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@6 { - reg = <6>; - color = ; - chan-name = "red:status-5"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@7 { - reg = <7>; - color = ; - chan-name = "green:status-5"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - - led@8 { - reg = <8>; - color = ; - chan-name = "blue:status-5"; - linux,default-trigger = "default-on"; - led-cur = /bits/ 8 <0x64>; - max-cur = /bits/ 8 <0x78>; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts deleted file mode 100644 index fac41897d4..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-unifi-ac-hd.dts +++ /dev/null @@ -1,315 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include -#include - -/ { - model = "Ubiquiti UniFi AC HD"; - compatible = "ubnt,unifi-ac-hd", "qcom,ipq8064"; - - aliases { - label-mac-device = &gmac2; - led-boot = &led_dome_white; - led-failsafe = &led_dome_white; - led-running = &led_dome_blue; - led-upgrade = &led_dome_blue; - mdio-gpio0 = &mdio0; - ethernet0 = &gmac2; - ethernet1 = &gmac1; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_dome_blue: dome_blue { - label = "blue:dome"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - led_dome_white: dome_white { - label = "white:dome"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio9", "gpio53"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - output-low; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - drive-strength = <10>; - bias-none; - }; - - cs { - pins = "gpio20"; - drive-strength = <12>; - }; - }; -}; - -&CPU_SPC { - status = "disabled"; -}; - -&gsbi5 { - status = "okay"; - - qcom,mode = ; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - cs-gpios = <&qcom_pinmux 20 0>; - - flash@0 { - compatible = "mx25u25635f", "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - m25p,fast-read; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - label = "MIBIB"; - reg = <0x20000 0x10000>; - read-only; - }; - - partition@30000 { - label = "SBL2"; - reg = <0x30000 0x20000>; - read-only; - }; - - partition@50000 { - label = "SBL3"; - reg = <0x50000 0x30000>; - read-only; - }; - - partition@80000 { - label = "DDRCONFIG"; - reg = <0x80000 0x10000>; - read-only; - }; - - partition@90000 { - label = "SSD"; - reg = <0x90000 0x10000>; - read-only; - }; - - partition@a0000 { - label = "TZ"; - reg = <0xa0000 0x30000>; - read-only; - }; - - partition@d0000 { - label = "RPM"; - reg = <0xd0000 0x20000>; - read-only; - }; - - partition@f0000 { - label = "APPSBL"; - reg = <0xf0000 0xc0000>; - read-only; - }; - - partition@1b0000 { - label = "APPSBLENV"; - reg = <0x1b0000 0x10000>; - read-only; - }; - - eeprom: partition@1c0000 { - label = "EEPROM"; - reg = <0x1c0000 0x10000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_eeprom_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_eeprom_6: macaddr@6 { - reg = <0x6 0x6>; - }; - }; - }; - - partition@1d0000 { - label = "bootselect"; - reg = <0x1d0000 0x10000>; - }; - - partition@1e0000 { - compatible = "denx,fit"; - label = "firmware"; - reg = <0x1e0000 0xe70000>; - }; - - partition@1050000 { - label = "kernel1"; - reg = <0x1050000 0xe70000>; - read-only; - }; - - partition@1ec0000 { - label = "debug"; - reg = <0x1ec0000 0x100000>; - read-only; - }; - - partition@1fc0000 { - label = "cfg"; - reg = <0x1fc0000 0x40000>; - read-only; - }; - }; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&nand { - status = "okay"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy4: ethernet-phy@4 { - reg = <4>; - }; - - phy5: ethernet-phy@5 { - reg = <5>; - }; -}; - -&gmac1 { - status = "okay"; - - mdiobus = <&mdio0>; - phy-handle = <&phy5>; - phy-mode = "sgmii"; - qcom,id = <1>; - - nvmem-cells = <&macaddr_eeprom_6>; - nvmem-cell-names = "mac-address"; -}; - -&gmac2 { - status = "okay"; - - mdiobus = <&mdio0>; - phy-handle = <&phy4>; - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_eeprom_0>; - nvmem-cell-names = "mac-address"; -}; - -&pcie0 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; -}; - -&tcsr { - status = "okay"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts deleted file mode 100644 index 62530efeb1..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts +++ /dev/null @@ -1,515 +0,0 @@ -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include -#include - -/ { - model = "TP-Link Archer VR2600v"; - compatible = "tplink,vr2600v", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - aliases { - mdio-gpio0 = &mdio0; - - led-boot = &power; - led-failsafe = &general; - led-running = &power; - led-upgrade = &general; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - dect { - label = "dect"; - gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - ledswitch { - label = "ledswitch"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - dsl { - label = "white:dsl"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb { - function = LED_FUNCTION_USB; - color = ; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - lan { - function = LED_FUNCTION_LAN; - color = ; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wlan2g { - label = "white:wlan2g"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; - }; - - wlan5g { - label = "white:wlan5g"; - gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>; - }; - - power: power { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - phone { - label = "white:phone"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - - wan { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; - }; - - general: general { - label = "white:general"; - gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17", - "gpio26", "gpio53", "gpio56", "gpio66"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; -}; - -&gsbi5 { - qcom,mode = ; - status = "okay"; - - spi4: spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "SBL1"; - reg = <0x0 0x20000>; - read-only; - }; - - partition@20000 { - label = "MIBIB"; - reg = <0x20000 0x20000>; - read-only; - }; - - partition@40000 { - label = "SBL2"; - reg = <0x40000 0x40000>; - read-only; - }; - - partition@80000 { - label = "SBL3"; - reg = <0x80000 0x80000>; - read-only; - }; - - partition@100000 { - label = "DDRCONFIG"; - reg = <0x100000 0x10000>; - read-only; - }; - - partition@110000 { - label = "SSD"; - reg = <0x110000 0x10000>; - read-only; - }; - - partition@120000 { - label = "TZ"; - reg = <0x120000 0x80000>; - read-only; - }; - - partition@1a0000 { - label = "RPM"; - reg = <0x1a0000 0x80000>; - read-only; - }; - - partition@220000 { - label = "APPSBL"; - reg = <0x220000 0x80000>; - read-only; - }; - - partition@2a0000 { - label = "APPSBLENV"; - reg = <0x2a0000 0x40000>; - read-only; - }; - - partition@2e0000 { - label = "OLDART"; - reg = <0x2e0000 0x40000>; - read-only; - }; - - partition@320000 { - label = "firmware"; - reg = <0x320000 0xc60000>; - compatible = "openwrt,uimage"; - openwrt,offset = <512>; /* account for pad-extra 512 */ - }; - - /* hole 0xf80000 - 0xfaf100 */ - - partition@faf100 { - label = "default-mac"; - reg = <0xfaf100 0x00200>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_defaultmac_0: macaddr@0 { - compatible = "mac-base"; - reg = <0x0 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; - - partition@fc0000 { - label = "ART"; - reg = <0xfc0000 0x40000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_ART_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_ART_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - }; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_defaultmac_0 (-1)>, <&precal_ART_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_defaultmac_0 0>, <&precal_ART_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_defaultmac_0 1>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_defaultmac_0 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts deleted file mode 100644 index 0afc9219c9..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts +++ /dev/null @@ -1,552 +0,0 @@ -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include -#include - -/ { - model = "NEC Aterm WG2600HP"; - compatible = "nec,wg2600hp", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - aliases { - mdio-gpio0 = &mdio0; - - led-boot = &power_green; - led-failsafe = &power_red; - led-running = &power_green; - led-upgrade = &power_green; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - bridge { - label = "bridge"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - debounce-interval = <60>; - wakeup-source; - }; - - converter { - label = "converter"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - converter_green { - label = "green:converter"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>; - }; - - power_red: power_red { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - active_green { - label = "green:active"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - active_red { - label = "red:active"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - power_green: power_green { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>; - }; - - converter_red { - label = "red:converter"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_green { - label = "green:wlan2g"; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_red { - label = "red:wlan2g"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_green { - label = "green:wlan5g"; - gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>; - }; - - wlan5g_red { - label = "red:wlan5g"; - gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>; - }; - - tv_green { - label = "green:tv"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - - tv_red { - label = "red:tv"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&CPU_SPC { - status = "disabled"; -}; - -&adm_dma { - status = "okay"; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - -switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - qca,sgmii-rxclk-falling-edge; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_PRODUCTDATA_6>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_PRODUCTDATA_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi5 { - status = "okay"; - - qcom,mode = ; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x20000>; - read-only; - }; - - MIBIB@20000 { - label = "MIBIB"; - reg = <0x20000 0x20000>; - read-only; - }; - - SBL2@40000 { - label = "SBL2"; - reg = <0x40000 0x40000>; - read-only; - }; - - SBL3@80000 { - label = "SBL3"; - reg = <0x80000 0x80000>; - read-only; - }; - - DDRCONFIG@100000 { - label = "DDRCONFIG"; - reg = <0x100000 0x10000>; - read-only; - }; - - SSD@110000 { - label = "SSD"; - reg = <0x110000 0x10000>; - read-only; - }; - - TZ@120000 { - label = "TZ"; - reg = <0x120000 0x80000>; - read-only; - }; - - RPM@1a0000 { - label = "RPM"; - reg = <0x1a0000 0x80000>; - read-only; - }; - - APPSBL@220000 { - label = "APPSBL"; - reg = <0x220000 0x80000>; - read-only; - }; - - APPSBLENV@2a0000 { - label = "APPSBLENV"; - reg = <0x2a0000 0x10000>; - }; - - PRODUCTDATA: PRODUCTDATA@2b0000 { - label = "PRODUCTDATA"; - reg = <0x2b0000 0x30000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_PRODUCTDATA_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_PRODUCTDATA_6: macaddr@6 { - reg = <0x6 0x6>; - }; - - macaddr_PRODUCTDATA_c: macaddr@c { - reg = <0xc 0x6>; - }; - - macaddr_PRODUCTDATA_12: macaddr@12 { - reg = <0x12 0x6>; - }; - }; - }; - - ART@2e0000 { - label = "ART"; - reg = <0x2e0000 0x40000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_ART_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_ART_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - TP@320000 { - label = "TP"; - reg = <0x320000 0x40000>; - read-only; - }; - - TINY@360000 { - label = "TINY"; - reg = <0x360000 0x500000>; - read-only; - }; - - firmware@860000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x860000 0x17a0000>; - }; - }; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_PRODUCTDATA_12>, <&precal_ART_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_PRODUCTDATA_c>, <&precal_ART_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio16", "gpio54", "gpio24", "gpio25"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14", - "gpio15", "gpio55", "gpio56", "gpio57", "gpio58", - "gpio64", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - usb_pwr_en_pins: usb_pwr_en_pins { - mux { - pins = "gpio22"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - output-high; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts deleted file mode 100644 index 0fb7e0531d..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts +++ /dev/null @@ -1,557 +0,0 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (C) 2017 Christian Mehlis - * Copyright (C) 2018 Mathias Kresin - * All rights reserved. - */ - -#include "qcom-ipq8064-v1.0.dtsi" - -#include -#include -#include - -/ { - compatible = "compex,wpq864", "qcom,ipq8064"; - model = "Compex WPQ864"; - - aliases { - mdio-gpio0 = &mdio0; - ethernet0 = &gmac1; - ethernet1 = &gmac0; - - led-boot = &led_pass; - led-failsafe = &led_fail; - led-running = &led_pass; - led-upgrade = &led_pass; - }; - - leds { - compatible = "gpio-leds"; - - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - rss4 { - label = "green:rss4"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - rss3 { - label = "green:rss3"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - rss2 { - label = "orange:rss2"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; - }; - - rss1 { - label = "red:rss1"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - led_pass: pass { - label = "green:pass"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - - led_fail: fail { - label = "green:fail"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - usb { - function = LED_FUNCTION_USB; - color = ; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb-pcie { - label = "green:usb-pcie"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - beeper { - compatible = "gpio-beeper"; - - pinctrl-0 = <&beeper_pins>; - pinctrl-names = "default"; - - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; - }; -}; - -&rpm { - pinctrl-0 = <&rpm_pins>; - pinctrl-names = "default"; -}; - -&nand { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - mt29f2g08abbeah4@0 { - compatible = "qcom,nandcs"; - - reg = <0>; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x1180000 0x5340000 0x10c0000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0000000 0x0040000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x0040000 0x0140000>; - read-only; - }; - - partition@180000 { - label = "0:SBL2"; - reg = <0x0180000 0x0140000>; - read-only; - }; - - partition@2c0000 { - label = "0:SBL3"; - reg = <0x02c0000 0x0280000>; - read-only; - }; - - partition@540000 { - label = "0:DDRCONFIG"; - reg = <0x0540000 0x0120000>; - read-only; - }; - - partition@660000 { - label = "0:SSD"; - reg = <0x0660000 0x0120000>; - read-only; - }; - - partition@780000 { - label = "0:TZ"; - reg = <0x0780000 0x0280000>; - read-only; - }; - - partition@a00000 { - label = "0:RPM"; - reg = <0x0a00000 0x0280000>; - read-only; - }; - - partition@c80000 { - label = "0:APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - partition@1180000 { - label = "0:APPSBLENV"; - reg = <0x1180000 0x0080000>; - }; - - partition@1200000 { - label = "0:ART"; - reg = <0x1200000 0x0140000>; - }; - - partition@1340000 { - label = "ubi"; - reg = <0x1340000 0x4000000>; - }; - - partition@5340000 { - label = "0:BOOTCONFIG"; - reg = <0x5340000 0x0060000>; - }; - - partition@53a0000 { - label = "0:SBL2_1"; - reg = <0x53a0000 0x0140000>; - read-only; - }; - - partition@54e0000 { - label = "0:SBL3_1"; - reg = <0x54e0000 0x0280000>; - read-only; - }; - - partition@5760000 { - label = "0:DDRCONFIG_1"; - reg = <0x5760000 0x0120000>; - read-only; - }; - - partition@5880000 { - label = "0:SSD_1"; - reg = <0x5880000 0x0120000>; - read-only; - }; - - partition@59a0000 { - label = "0:TZ_1"; - reg = <0x59a0000 0x0280000>; - read-only; - }; - - partition@5c20000 { - label = "0:RPM_1"; - reg = <0x5c20000 0x0280000>; - read-only; - }; - - partition@5ea0000 { - label = "0:BOOTCONFIG1"; - reg = <0x5ea0000 0x0060000>; - }; - - partition@5f00000 { - label = "0:APPSBL_1"; - reg = <0x5f00000 0x0500000>; - read-only; - }; - - partition@6400000 { - label = "ubi_1"; - reg = <0x6400000 0x4000000>; - }; - - partition@a400000 { - label = "unused"; - reg = <0xa400000 0x5c00000>; - }; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi4_serial { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -&flash { - compatible = "jedec,spi-nor"; -}; - -&sata_phy { - status = "disabled"; -}; - -&sata { - status = "disabled"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; - - rx_eq = <2>; - tx_deamp_3_5db = <32>; - mpll = <160>; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; - - rx_eq = <2>; - tx_deamp_3_5db = <32>; - mpll = <160>; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; -}; - -&pcie1 { - status = "okay"; -}; - -&pcie2 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; -}; - -&qcom_pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinctrl0 { - pcie0_pcie2_perst { - pins = "gpio3"; - function = "gpio"; - drive-strength = <2>; - bias-disable; - output-high; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio22", - "gpio23", "gpio24", "gpio25", "gpio53"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio54"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - beeper_pins: beeper_pins { - mux { - pins = "gpio55"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - rpm_pins: rpm_pins { - mux { - pins = "gpio12", "gpio13"; - function = "gsbi4"; - drive-strength = <10>; - bias-disable; - }; - }; - - uart0_pins: uart0_pins { - mux { - pins = "gpio10", "gpio11"; - function = "gsbi4"; - drive-strength = <10>; - bias-disable; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19"; - function = "gsbi5"; - drive-strength = <10>; - bias-pull-down; - }; - - clk { - pins = "gpio21"; - function = "gsbi5"; - drive-strength = <12>; - bias-pull-down; - }; - - cs { - pins = "gpio20"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; - }; -}; - -&tcsr { - qcom,usb-ctrl-select = ; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts deleted file mode 100644 index 5807425830..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts +++ /dev/null @@ -1,622 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include -#include - -/ { - model = "Buffalo WXR-2533DHP"; - compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064"; - - memory@42000000 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - aliases { - led-boot = &power; - led-failsafe = &diag; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - /* use "ubi_rootfs" volume in "ubi" partition as rootfs */ - bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs"; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - usb { - function = LED_FUNCTION_USB; - color = ; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "usbport"; - trigger-sources = <&hub_port0 &hub_port1>; - }; - - guestport { - label = "green:guestport"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - diag: diag { - label = "orange:diag"; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - internet_orange { - label = "orange:internet"; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; - }; - - internet_white { - label = "white:internet"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wireless_orange { - label = "orange:wireless"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wireless_white { - label = "white:wireless"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - router_orange { - label = "orange:router"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>; - }; - - router_white { - label = "white:router"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - power: power { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - power { - label = "power"; - gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - eject { - label = "eject"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - guest { - label = "guest"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - ap { - label = "ap"; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - debounce-interval = <60>; - wakeup-source; - }; - - router { - label = "router"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - debounce-interval = <60>; - wakeup-source; - }; - - auto { - label = "auto"; - gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - debounce-interval = <60>; - wakeup-source; - }; - }; -}; - -&nand { - status = "okay"; - - cs@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - ubi@0 { - label = "ubi"; - reg = <0x0000000 0x4000000>; - }; - - rootfs_1@4000000 { - label = "rootfs_1"; - reg = <0x4000000 0x4000000>; - }; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <1>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_ART_6>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - - nvmem-cells = <&macaddr_ART_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gsbi4_serial { - pinctrl-0 = <&uart0_pins>; - pinctrl-names = "default"; -}; - -&gsbi5 { - status = "okay"; - qcom,mode = ; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - SBL1@0 { - label = "SBL1"; - reg = <0x0 0x10000>; - read-only; - }; - - MIBIB@10000 { - label = "MIBIB"; - reg = <0x10000 0x20000>; - read-only; - }; - - SBL2@30000 { - label = "SBL2"; - reg = <0x30000 0x30000>; - read-only; - }; - - SBL3@60000 { - label = "SBL3"; - reg = <0x60000 0x30000>; - read-only; - }; - - DDRCONFIG@90000 { - label = "DDRCONFIG"; - reg = <0x90000 0x10000>; - read-only; - }; - - SSD@a0000 { - label = "SSD"; - reg = <0xa0000 0x10000>; - read-only; - }; - - TZ@b0000 { - label = "TZ"; - reg = <0xb0000 0x30000>; - read-only; - }; - - RPM@e0000 { - label = "RPM"; - reg = <0xe0000 0x20000>; - read-only; - }; - - APPSBL@100000 { - label = "APPSBL"; - reg = <0x100000 0x70000>; - read-only; - }; - - APPSBLENV@170000 { - label = "APPSBLENV"; - reg = <0x170000 0x10000>; - read-only; - }; - - ART@180000 { - label = "ART"; - reg = <0x180000 0x40000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_ART_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_ART_6: macaddr@6 { - reg = <0x6 0x6>; - }; - - macaddr_ART_18: macaddr@18 { - reg = <0x18 0x6>; - }; - - macaddr_ART_1e: macaddr@1e { - reg = <0x1e 0x6>; - }; - - precal_ART_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_ART_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - BOOTCONFIG@1c0000 { - label = "BOOTCONFIG"; - reg = <0x1c0000 0x10000>; - read-only; - }; - - APPSBL_1@1d0000 { - label = "APPSBL_1"; - reg = <0x1d0000 0x70000>; - read-only; - }; - }; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&dwc3_0 { - #address-cells = <1>; - #size-cells = <0>; - - hub_port0: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; - -&dwc3_1 { - #address-cells = <1>; - #size-cells = <0>; - - hub_port1: port@1 { - reg = <1>; - #trigger-source-cells = <0>; - }; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_ART_1e>, <&precal_ART_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&macaddr_ART_18>, <&precal_ART_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57", - "gpio58", "gpio64", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22", - "gpio23", "gpio24", "gpio25", "gpio26", "gpio53"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - uart0_pins: uart0_pins { - mux { - pins = "gpio10", "gpio11"; - function = "gsbi4"; - drive-strength = <12>; - bias-disable; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs{ - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - usb_pwr_en_pins: usb_pwr_en_pins { - mux{ - pins = "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - output-high; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-ac400i.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-ac400i.dts deleted file mode 100644 index 7151f8de52..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-ac400i.dts +++ /dev/null @@ -1,318 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8065-smb208.dtsi" -#include - -/ { - model = "Nokia AC400i"; - compatible = "nokia,ac400i", "qcom,ipq8065", "qcom,ipq8064"; - - aliases { - mdio-gpio0 = &mdio0; - ethernet0 = &gmac0; - ethernet1 = &gmac1; - - led-boot = &pwr_red; - led-failsafe = &pwr_red; - led-running = &pwr_green; - led-upgrade = &pwr_green; - }; - - chosen { - bootargs-override = " console=ttyMSM0,115200n8 ubi.mtd=ubi root=/dev/ubiblock0_2"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 15 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - 5g_red { - label = "red:5g"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>; - }; - - 5g_green { - label = "green:5g"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - - 2g_red { - label = "red:2g"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - }; - - 2g_green { - label = "green:2g"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>; - }; - - eth1_red { - label = "red:eth1"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_HIGH>; - }; - - eth1_green { - label = "green:eth1"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>; - }; - - eth2_red { - label = "red:eth2"; - gpios = <&qcom_pinmux 67 GPIO_ACTIVE_HIGH>; - }; - - eth2_green { - label = "green:eth2"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>; - }; - - ctrl_red { - label = "red:ctrl"; - gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>; - }; - - ctrl_green { - label = "green:ctrl"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>; - }; - - pwr_red: pwr_red { - label = "red:pwr"; - gpios = <&qcom_pinmux 2 GPIO_ACTIVE_LOW>; - }; - - pwr_green: pwr_green { - label = "green:pwr"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19"; - function = "gsbi5"; - drive-strength = <10>; - bias-pull-down; - }; - - clk { - pins = "gpio21"; - function = "gsbi5"; - drive-strength = <12>; - bias-pull-down; - }; - - cs { - pins = "gpio20"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio65", "gpio64", - "gpio53", "gpio54", - "gpio68", "gpio22", - "gpio67", "gpio23", - "gpio55", "gpio56", - "gpio2", "gpio26"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio15"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - -}; - -&gsbi5 { - qcom,mode = ; - status = "okay"; - - spi4: spi@1a280000 { - status = "okay"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "qcom,smem-part"; - }; - }; - }; -}; - -&usb3_0 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "Nokia-AC400i"; - }; - }; -}; - -&pcie1 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "Nokia-AC400i"; - }; - }; -}; - -&mdio0 { - status = "okay"; - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - -}; - -//POE -&gmac0 { - status = "okay"; - qcom,id = <0>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - mdiobus = <&mdio0>; - phy-handle = <&phy0>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -//LAN1 -&gmac1 { - status = "okay"; - qcom,id = <1>; - - mdiobus = <&mdio0>; - phy-handle = <&phy1>; - phy-mode = "rgmii"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&nand { - status = "okay"; - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - rootfs@0 { - label = "rootfs"; - reg = <0x0000000 0x4000000>; - }; - - rootfs_1@4000000 { - label = "rootfs_1"; - reg = <0x4000000 0x4000000>; - }; - - cfg@8000000 { - label = "cfg"; - reg = <0x8000000 0x8000000>; - }; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts deleted file mode 100644 index 7d22b4f541..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts +++ /dev/null @@ -1,395 +0,0 @@ -#include "qcom-ipq8065-smb208.dtsi" - -#include -#include - -/ { - model = "ZyXEL NBG6817"; - compatible = "zyxel,nbg6817", "qcom,ipq8065", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - aliases { - mdio-gpio0 = &mdio0; - sdcc1 = &sdcc1; - - led-boot = &power; - led-failsafe = &power; - led-running = &power; - led-upgrade = &power; - }; - - chosen { - bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd fstools_ignore_partname=1"; - append-rootblock = "root=/dev/mmcblk0p"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>; - linux,code = ; - linux,input-type = ; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - internet { - label = "white:internet"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - - power: power { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - wifi2g { - label = "amber:wifi2g"; - gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>; - }; - - /* wifi2g amber from the manual is missing */ - - wifi5g { - label = "amber:wifi5g"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; - - /* wifi5g amber from the manual is missing */ - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio53", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio9", "gpio26", "gpio33", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - mdio0_pins: mdio0-pins { - clk { - pins = "gpio1"; - input-disable; - }; - }; - - rgmii2_pins: rgmii2-pins { - tx { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ; - input-disable; - }; - }; - - spi_pins: spi_pins { - cs { - pins = "gpio20"; - drive-strength = <12>; - }; - }; - - usb0_pwr_en_pins: usb0_pwr_en_pins { - mux { - pins = "gpio16", "gpio17"; - function = "gpio"; - drive-strength = <12>; - }; - - pwr { - pins = "gpio17"; - bias-pull-down; - output-high; - }; - - ovc { - pins = "gpio16"; - bias-pull-up; - }; - }; - - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio14", "gpio15"; - function = "gpio"; - drive-strength = <12>; - }; - - pwr { - pins = "gpio14"; - bias-pull-down; - output-high; - }; - - ovc { - pins = "gpio15"; - bias-pull-up; - }; - }; -}; - -&gsbi5 { - qcom,mode = ; - status = "okay"; - - spi4: spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <51200000>; - reg = <0>; - - partitions { - compatible = "qcom,smem-part"; - }; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb0_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; - - pinctrl-0 = <&usb1_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&pcie0 { - status = "okay"; - reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; -}; - -&pcie1 { - status = "okay"; - reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - max-link-speed = <1>; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <1>; - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <0>; - qcom,rgmii_delay = <1>; - qcom,phy_mii_type = <0>; - qcom,emulation = <0>; - qcom,irq = <255>; - mdiobus = <&mdio0>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <2>; - qcom,phy_mdio_addr = <0>; /* none */ - qcom,poll_required = <0>; /* no polling */ - qcom,rgmii_delay = <0>; - qcom,phy_mii_type = <1>; - qcom,emulation = <0>; - qcom,irq = <258>; - mdiobus = <&mdio0>; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&sdcc1 { - status = "okay"; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi deleted file mode 100644 index a7f0b1dbf0..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-nighthawk.dtsi +++ /dev/null @@ -1,541 +0,0 @@ -#include "qcom-ipq8065-smb208.dtsi" - -#include -#include - -/ { - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - reserved-memory { - rsvd@5fe00000 { - reg = <0x5fe00000 0x200000>; - reusable; - }; - - ramoops@42100000 { - compatible = "ramoops"; - reg = <0x42100000 0x40000>; - record-size = <0x4000>; - console-size = <0x4000>; - ftrace-size = <0x4000>; - pmsg-size = <0x4000>; - }; - }; - - aliases { - label-mac-device = &gmac2; - - led-boot = &power_white; - led-failsafe = &power_amber; - led-running = &power_white; - led-upgrade = &power_amber; - - mdio-gpio0 = &mdio0; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - wifi { - label = "wifi"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds: leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - power_white: power_white { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>; - default-state = "keep"; - }; - - power_amber: power_amber { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>; - }; - - wan_white { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - wan_amber { - function = LED_FUNCTION_WAN; - color = ; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - wifi { - label = "white:wifi"; - gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>; - }; - - wps { - function = LED_FUNCTION_WPS; - color = ; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54", "gpio65"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", - "gpio22", "gpio23", "gpio24", - "gpio26", "gpio53", "gpio64"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - mdio0_pins: mdio0-pins { - clk { - pins = "gpio1"; - input-disable; - }; - }; - - rgmii2_pins: rgmii2-pins { - tx { - pins = "gpio27", "gpio28", "gpio29", - "gpio30", "gpio31", "gpio32"; - input-disable; - }; - }; - - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19", "gpio21"; - function = "gsbi5"; - bias-pull-down; - }; - - data { - pins = "gpio18", "gpio19"; - drive-strength = <10>; - }; - - cs { - pins = "gpio20"; - drive-strength = <10>; - bias-pull-up; - }; - - clk { - pins = "gpio21"; - drive-strength = <12>; - }; - }; - - spi6_pins: spi6_pins { - mux { - pins = "gpio55", "gpio56", "gpio58"; - function = "gsbi6"; - bias-pull-down; - }; - - mosi { - pins = "gpio55"; - drive-strength = <12>; - }; - - miso { - pins = "gpio56"; - drive-strength = <14>; - }; - - cs { - pins = "gpio57"; - drive-strength = <12>; - bias-pull-up; - }; - - clk { - pins = "gpio58"; - drive-strength = <12>; - }; - - reset { - pins = "gpio33"; - drive-strength = <10>; - bias-pull-down; - output-high; - }; - }; - - usb0_pwr_en_pins: usb0_pwr_en_pins { - mux { - pins = "gpio15"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; - - usb1_pwr_en_pins: usb1_pwr_en_pins { - mux { - pins = "gpio16", "gpio68"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-high; - }; - }; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x1180000>; - - partitions: partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "qcadata"; - reg = <0x0000000 0x0c80000>; - read-only; - }; - - partition@c80000 { - label = "APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - partition@1180000 { - label = "APPSBLENV"; - reg = <0x1180000 0x0080000>; - read-only; - }; - - art: partition@1200000 { - label = "art"; - reg = <0x1200000 0x0140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_art_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_art_6: macaddr@6 { - compatible = "mac-base"; - reg = <0x6 0x6>; - #nvmem-cell-cells = <1>; - }; - - macaddr_art_c: macaddr@c { - reg = <0xc 0x6>; - }; - - precal_art_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_art_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@1340000 { - label = "artbak"; - reg = <0x1340000 0x0140000>; - read-only; - }; - - partition@1480000 { - label = "kernel"; - reg = <0x1480000 0x0400000>; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@5 { - reg = <5>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac2>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac1 { - status = "okay"; - - phy-mode = "rgmii"; - qcom,id = <1>; - qcom,phy_mdio_addr = <4>; - qcom,poll_required = <0>; - qcom,rgmii_delay = <1>; - qcom,phy_mii_type = <0>; - qcom,emulation = <0>; - qcom,irq = <255>; - mdiobus = <&mdio0>; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - nvmem-cells = <&macaddr_art_6 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - phy-mode = "sgmii"; - qcom,id = <2>; - qcom,phy_mdio_addr = <0>; /* none */ - qcom,poll_required = <0>; /* no polling */ - qcom,rgmii_delay = <0>; - qcom,phy_mii_type = <1>; - qcom,emulation = <0>; - qcom,irq = <258>; - mdiobus = <&mdio0>; - - nvmem-cells = <&macaddr_art_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&sata_phy { - status = "okay"; -}; - -&sata { - status = "okay"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; - - pinctrl-0 = <&usb0_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; - - pinctrl-0 = <&usb1_pwr_en_pins>; - pinctrl-names = "default"; -}; - -&pcie0 { - status = "okay"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi0: wifi@1,0 { - compatible = "pci168c,0046"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&pcie1 { - status = "okay"; - - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi1: wifi@1,0 { - compatible = "pci168c,0046"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-r7800.dts deleted file mode 100644 index 3440c52699..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-r7800.dts +++ /dev/null @@ -1,46 +0,0 @@ -#include "qcom-ipq8065-nighthawk.dtsi" - -/ { - model = "Netgear Nighthawk X4S R7800"; - compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064"; -}; - -&leds { - usb1 { - label = "white:usb1"; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "white:usb2"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - esata { - label = "white:esata"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; -}; - -&partitions { - partition@1880000 { - label = "ubi"; - reg = <0x1880000 0x6080000>; - }; - - partition@7900000 { - label = "reserve"; - reg = <0x7900000 0x0700000>; - read-only; - }; -}; - -&wifi0 { - nvmem-cells = <&macaddr_art_6 1>, <&precal_art_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; -}; - -&wifi1 { - nvmem-cells = <&macaddr_art_6 2>, <&precal_art_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts deleted file mode 100644 index 12f15bd147..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-rt4230w-rev6.dts +++ /dev/null @@ -1,601 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq8065-smb208.dtsi" -#include -#include - -/ { - model = "Askey RT4230W REV6"; - compatible = "askey,rt4230w-rev6", "qcom,ipq8065", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x3e000000>; - device_type = "memory"; - }; - - aliases { - led-boot = &ledctrl3; - led-failsafe = &ledctrl1; - led-running = &ledctrl2; - led-upgrade = &ledctrl3; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - ledctrl1: ledctrl1 { - label = "ledctrl1"; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>; - }; - - ledctrl2: ledctrl2 { - label = "ledctrl2"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - ledctrl3: ledctrl3 { - label = "ledctrl3"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio54", "gpio68"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio22", "gpio23", "gpio24"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - rgmii2_pins: rgmii2-pins { - mux { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", - "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62"; - function = "rgmii2"; - drive-strength = <8>; - bias-disable; - }; - - tx { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32"; - input-disable; - }; - }; - - spi_pins: spi_pins { - cs { - pins = "gpio20"; - drive-strength = <12>; - }; - }; -}; - -&gsbi5 { - qcom,mode = ; - status = "okay"; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "everspin,mr25h256"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - qcom,boot-partitions = <0x0 0x1180000 0x1340000 0x10c0000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0000000 0x0040000>; - read-only; - }; - - partition@40000 { - label = "0:MIBIB"; - reg = <0x0040000 0x0140000>; - read-only; - }; - - partition@180000 { - label = "0:SBL2"; - reg = <0x0180000 0x0140000>; - read-only; - }; - - partition@2c0000 { - label = "0:SBL3"; - reg = <0x02c0000 0x0280000>; - read-only; - }; - - partition@540000 { - label = "0:DDRCONFIG"; - reg = <0x0540000 0x0120000>; - read-only; - }; - - partition@660000 { - label = "0:SSD"; - reg = <0x0660000 0x0120000>; - read-only; - }; - - partition@780000 { - label = "0:TZ"; - reg = <0x0780000 0x0280000>; - read-only; - }; - - partition@a00000 { - label = "0:RPM"; - reg = <0x0a00000 0x0280000>; - read-only; - }; - - partition@c80000 { - label = "0:APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - - partition@1180000 { - label = "0:APPSBLENV"; - reg = <0x1180000 0x0080000>; - }; - - partition@1200000 { - label = "0:ART"; - reg = <0x1200000 0x0140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_ART_0: macaddr@0 { - reg = <0x0 0x6>; - }; - - macaddr_ART_6: macaddr@6 { - reg = <0x6 0x6>; - }; - - precal_ART_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - - precal_ART_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - - partition@1340000 { - label = "0:BOOTCONFIG"; - reg = <0x1340000 0x0060000>; - read-only; - }; - - partition@13a0000 { - label = "0:SBL2_1"; - reg = <0x13a0000 0x0140000>; - read-only; - }; - - partition@14e0000 { - label = "0:SBL3_1"; - reg = <0x14e0000 0x0280000>; - read-only; - }; - - partition@1760000 { - label = "0:DDRCONFIG_1"; - reg = <0x1760000 0x0120000>; - read-only; - }; - - partition@1880000 { - label = "0:SSD_1"; - reg = <0x1880000 0x0120000>; - read-only; - }; - - partition@19a0000 { - label = "0:TZ_1"; - reg = <0x19a0000 0x0280000>; - read-only; - }; - - partition@1c20000 { - label = "0:RPM_1"; - reg = <0x1c20000 0x0280000>; - read-only; - }; - - partition@1ea0000 { - label = "0:BOOTCONFIG1"; - reg = <0x1ea0000 0x0060000>; - read-only; - }; - - partition@1f00000 { - label = "0:APPSBL_1"; - reg = <0x1f00000 0x0500000>; - read-only; - }; - - partition@2400000 { - label = "ubi"; - reg = <0x2400000 0x1a000000>; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "wan"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = ; - function = LED_FUNCTION_WAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = ; - function = LED_FUNCTION_WAN; - default-state = "keep"; - }; - }; - }; - - port@2 { - reg = <2>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = ; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = ; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - }; - }; - - port@3 { - reg = <3>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = ; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = ; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - }; - }; - - port@4 { - reg = <4>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = ; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = ; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - }; - }; - - port@5 { - reg = <5>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port5>; - - leds { - #address-cells = <1>; - #size-cells = <0>; - - led@0 { - reg = <0>; - color = ; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - - led@1 { - reg = <1>; - color = ; - function = LED_FUNCTION_LAN; - default-state = "keep"; - }; - }; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - - phy_port5: phy@4 { - reg = <4>; - }; - }; - }; -}; - -&gmac0 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <0>; - - nvmem-cells = <&macaddr_ART_0>; - nvmem-cell-names = "mac-address"; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <1>; - - nvmem-cells = <&macaddr_ART_6>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi0: wifi@1,0 { - compatible = "pci168c,0046"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&precal_ART_1000>; - nvmem-cell-names = "pre-calibration"; - }; - }; -}; - -&pcie1 { - status = "okay"; - reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi1: wifi@1,0 { - compatible = "pci168c,0046"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&precal_ART_5000>; - nvmem-cell-names = "pre-calibration"; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts deleted file mode 100644 index 8818e95e8d..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-tr4400-v2.dts +++ /dev/null @@ -1,524 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later - -#include "qcom-ipq8065-smb208.dtsi" -#include -#include - -/ { - model = "Arris TR4400 v2"; - compatible = "arris,tr4400-v2", "qcom,ipq8065", "qcom,ipq8064"; - - memory@0 { - reg = <0x42000000 0x1e000000>; - device_type = "memory"; - }; - - aliases { - led-boot = &led_status_blue; - led-failsafe = &led_status_red; - led-running = &led_status_blue; - led-upgrade = &led_status_red; - }; - - chosen { - bootargs = "rootfstype=squashfs noinitrd"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - - wps { - label = "wps"; - gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_status_red: status_red { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>; - }; - - led_status_blue: status_blue { - function = LED_FUNCTION_STATUS; - color = ; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&qcom_pinmux { - button_pins: button_pins { - mux { - pins = "gpio6", "gpio54"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio7", "gpio8"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - }; - }; - - rgmii2_pins: rgmii2-pins { - tx { - pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32"; - input-disable; - }; - }; - - spi_pins: spi_pins { - cs { - pins = "gpio20"; - drive-strength = <12>; - }; - }; -}; - -&gsbi5 { - qcom,mode = ; - status = "okay"; - - spi@1a280000 { - status = "okay"; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "everspin,mr25h256"; - spi-max-frequency = <40000000>; - reg = <0>; - }; - }; -}; - -&nand { - status = "okay"; - - nand@0 { - reg = <0>; - compatible = "qcom,nandcs"; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - qcom,boot-partitions = <0x0 0x1180000 0x5340000 0x10c0000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "0:SBL1"; - reg = <0x0000000 0x0040000>; - read-only; - }; - partition@40000 { - label = "0:MIBIB"; - reg = <0x0040000 0x0140000>; - read-only; - }; - partition@180000 { - label = "0:SBL2"; - reg = <0x0180000 0x0140000>; - read-only; - }; - partition@2c0000 { - label = "0:SBL3"; - reg = <0x02c0000 0x0280000>; - read-only; - }; - partition@540000 { - label = "0:DDRCONFIG"; - reg = <0x0540000 0x0120000>; - read-only; - }; - partition@660000 { - label = "0:SSD"; - reg = <0x0660000 0x0120000>; - read-only; - }; - partition@780000 { - label = "0:TZ"; - reg = <0x0780000 0x0280000>; - read-only; - }; - partition@a00000 { - label = "0:RPM"; - reg = <0x0a00000 0x0280000>; - read-only; - }; - partition@c80000 { - label = "0:APPSBL"; - reg = <0x0c80000 0x0500000>; - read-only; - }; - partition@1180000 { - label = "0:APPSBLENV"; - reg = <0x1180000 0x0080000>; - }; - partition@1200000 { - label = "0:ART"; - reg = <0x1200000 0x0140000>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - precal_ART_1000: precal@1000 { - reg = <0x1000 0x2f20>; - }; - precal_ART_5000: precal@5000 { - reg = <0x5000 0x2f20>; - }; - }; - }; - stock_partition@1340000 { - label = "stock_rootfs"; - reg = <0x1340000 0x4000000>; - - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "extra"; - reg = <0x0 0x4000000>; - }; - }; - partition@5340000 { - label = "0:BOOTCONFIG"; - reg = <0x5340000 0x0060000>; - read-only; - }; - partition@53a0000 { - label = "0:SBL2_1"; - reg = <0x53a0000 0x0140000>; - read-only; - }; - partition@54e0000 { - label = "0:SBL3_1"; - reg = <0x54e0000 0x0280000>; - read-only; - }; - partition@5760000 { - label = "0:DDRCONFIG_1"; - reg = <0x5760000 0x0120000>; - read-only; - }; - partition@5880000 { - label = "0:SSD_1"; - reg = <0x5880000 0x0120000>; - read-only; - }; - partition@59a0000 { - label = "0:TZ_1"; - reg = <0x59a0000 0x0280000>; - read-only; - }; - partition@5c20000 { - label = "0:RPM_1"; - reg = <0x5c20000 0x0280000>; - read-only; - }; - partition@5ea0000 { - label = "0:BOOTCONFIG1"; - reg = <0x5ea0000 0x0060000>; - read-only; - }; - partition@5f00000 { - label = "0:APPSBL_1"; - reg = <0x5f00000 0x0500000>; - read-only; - }; - stock_partition@6400000 { - label = "stock_rootfs_1"; - reg = <0x6400000 0x4000000>; - - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "fw_env"; - reg = <0x0 0x100000>; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_fw_env_0: macaddr@0 { - reg = <0x00 0x6>; - }; - macaddr_fw_env_6: macaddr@6 { - reg = <0x06 0x6>; - }; - macaddr_fw_env_c: macaddr@c { - reg = <0x0c 0x6>; - }; - macaddr_fw_env_12: macaddr@12 { - reg = <0x12 0x6>; - }; - macaddr_fw_env_18: macaddr@18 { - reg = <0x18 0x6>; - }; - }; - }; - - partition@100000 { - label = "ubi"; - reg = <0x100000 0x9b00000>; - }; - }; - stock_partition@a400000 { - label = "stock_fw_env"; - reg = <0xa400000 0x0100000>; - }; - stock_partition@a500000 { - label = "stock_config"; - reg = <0xa500000 0x0800000>; - }; - stock_partition@ad00000 { - label = "stock_PKI"; - reg = <0xad00000 0x0200000>; - }; - stock_partition@af00000 { - label = "stock_scfgmgr"; - reg = <0xaf00000 0x0100000>; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - switch@10 { - compatible = "qca,qca8337"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x10>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - label = "cpu"; - ethernet = <&gmac0>; - phy-mode = "rgmii"; - tx-internal-delay-ps = <1000>; - rx-internal-delay-ps = <1000>; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - - port@1 { - reg = <1>; - label = "lan1"; - phy-mode = "internal"; - phy-handle = <&phy_port1>; - }; - - port@2 { - reg = <2>; - label = "lan2"; - phy-mode = "internal"; - phy-handle = <&phy_port2>; - }; - - port@3 { - reg = <3>; - label = "lan3"; - phy-mode = "internal"; - phy-handle = <&phy_port3>; - }; - - port@4 { - reg = <4>; - label = "lan4"; - phy-mode = "internal"; - phy-handle = <&phy_port4>; - }; - - port@6 { - reg = <6>; - label = "cpu"; - ethernet = <&gmac1>; - phy-mode = "sgmii"; - qca,sgmii-enable-pll; - - fixed-link { - speed = <1000>; - full-duplex; - }; - }; - }; - - mdio { - #address-cells = <1>; - #size-cells = <0>; - - phy_port1: phy@0 { - reg = <0>; - }; - - phy_port2: phy@1 { - reg = <1>; - }; - - phy_port3: phy@2 { - reg = <2>; - }; - - phy_port4: phy@3 { - reg = <3>; - }; - }; - }; - - phy7: ethernet-phy@7 { - reg = <7>; - }; -}; - -&gmac0 { - status = "okay"; - phy-mode = "rgmii"; - qcom,id = <0>; - - nvmem-cells = <&macaddr_fw_env_18>; - nvmem-cell-names = "mac-address"; - - pinctrl-0 = <&rgmii2_pins>; - pinctrl-names = "default"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac1 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <1>; - - nvmem-cells = <&macaddr_fw_env_0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac3 { - status = "okay"; - phy-mode = "sgmii"; - qcom,id = <3>; - phy-handle = <&phy7>; - - nvmem-cells = <&macaddr_fw_env_6>; - nvmem-cell-names = "mac-address"; -}; - -&adm_dma { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie0 { - status = "okay"; - reset-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie0_pins>; - pinctrl-names = "default"; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi0: wifi@1,0 { - compatible = "pci168c,0046"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&precal_ART_1000>, <&macaddr_fw_env_12>; - nvmem-cell-names = "pre-calibration", "mac-address"; - }; - }; -}; - -&pcie1 { - status = "okay"; - reset-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>; - pinctrl-0 = <&pcie1_pins>; - pinctrl-names = "default"; - max-link-speed = <1>; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi1: wifi@1,0 { - compatible = "pci168c,0040"; - reg = <0x00010000 0 0 0 0>; - - nvmem-cells = <&precal_ART_5000>, <&macaddr_fw_env_c>; - nvmem-cell-names = "pre-calibration", "mac-address"; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr450.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr450.dts deleted file mode 100644 index 1d4e9d36fe..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr450.dts +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8065-nighthawk.dtsi" - -/ { - model = "Netgear Nighthawk XR450"; - compatible = "netgear,xr450", "qcom,ipq8065", "qcom,ipq8064"; - -}; - -&leds { - usb1 { - label = "white:usb1"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "white:usb2"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; -}; - -&partitions { - partition@1880000 { - label = "ubi"; - reg = <0x1880000 0xce00000>; - }; - - partition@e680000 { - label = "reserve"; - reg = <0xe680000 0x0780000>; - read-only; - }; -}; - -&wifi0 { - nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; -}; - -&wifi1 { - nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr500.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr500.dts deleted file mode 100644 index 9eef59eaf3..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr500.dts +++ /dev/null @@ -1,44 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8065-nighthawk.dtsi" - -/ { - model = "Netgear Nighthawk XR500"; - compatible = "netgear,xr500", "qcom,ipq8065", "qcom,ipq8064"; - -}; - -&leds { - usb1 { - label = "white:usb1"; - gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>; - }; - - usb2 { - label = "white:usb2"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>; - }; -}; - -&partitions { - partition@1880000 { - label = "ubi"; - reg = <0x1880000 0xce00000>; - }; - - partition@e680000 { - label = "reserve"; - reg = <0xe680000 0x0780000>; - read-only; - }; -}; - -&wifi0 { - nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>; - nvmem-cell-names = "mac-address", "pre-calibration"; -}; - -&wifi1 { - nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>; - nvmem-cell-names = "mac-address", "pre-calibration"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-ap3935.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-ap3935.dts deleted file mode 100644 index 0c865ef7c7..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-ap3935.dts +++ /dev/null @@ -1,358 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later OR MIT - -#include "qcom-ipq8064-v2.0.dtsi" - -#include -#include -#include - -/ { - model = "Extreme Networks AP3935"; - compatible = "extreme,ap3935", "qcom,ipq8064"; - - memory@0 { - reg = <0x41400000 0x3ec00000>; - device_type = "memory"; - }; - - aliases { - serial0 = &gsbi7_serial; - serial1 = &gsbi2_serial; - mdio-gpio0 = &mdio0; - ethernet0 = &gmac0; - ethernet1 = &gmac2; - - led-boot = &led_power_green; - led-failsafe = &led_power_orange; - led-running = &led_power_green; - led-upgrade = &led_power_green; - }; - - chosen { - stdout-path = "serial0:115200n8"; - bootargs-override = "ubi.block=0,0 root=/dev/ubiblock0_0"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_power_green: power_green { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 22 GPIO_ACTIVE_LOW>; - }; - - led_power_orange: power_orange { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>; - }; - - led_wlan2g_green { - label = "green:wlan2g"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy0tpt"; - }; - - led_wlan5g_green { - label = "green:wlan5g"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>; - linux,default-trigger = "phy1tpt"; - }; - - led_lan1_green { - label = "green:lan1"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - led_lan1_orange { - label = "orange:lan1"; - gpios = <&qcom_pinmux 27 GPIO_ACTIVE_LOW>; - }; - - led_lan2_green { - label = "green:lan2"; - gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>; - }; - - led_lan2_orange { - label = "orange:lan2"; - gpios = <&qcom_pinmux 29 GPIO_ACTIVE_LOW>; - }; - }; -}; - - -&qcom_pinmux { - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19"; - function = "gsbi5"; - drive-strength = <10>; - bias-pull-down; - }; - - clk { - pins = "gpio21"; - function = "gsbi5"; - drive-strength = <12>; - bias-pull-down; - }; - - cs { - pins = "gpio20"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio22", "gpio23", "gpio24", "gpio25", - "gpio26", "gpio27", "gpio28", "gpio29"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio56"; - function = "gpio"; - bias-pull-up; - }; - }; -}; - -&gsbi2 { - qcom,mode = ; - status = "okay"; - - gsbi2_serial: serial@12490000 { - status = "okay"; - }; -}; - -&gsbi4 { - qcom,mode = ; - status = "okay"; - - serial@16340000 { - status = "disabled"; - }; -}; - -&gsbi7 { - qcom,mode = ; - status = "okay"; - - gsbi7_serial: serial@16640000 { - status = "okay"; - }; -}; - -&gsbi5 { - qcom,mode = ; - status = "okay"; - - spi4: spi@1a280000 { - status = "okay"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - flash@0 { - compatible = "jedec,spi-nor"; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - cfg1@2a0000 { - compatible = "u-boot,env-redundant-bool"; - label = "CFG1"; - reg = <0x2a0000 0x0010000>; - - ethaddr: ethaddr { - #nvmem-cell-cells = <1>; - }; - }; - - bootpri@2b0000 { - label = "BootPRI"; - reg = <0x2b0000 0x0080000>; - }; - - cfg2@330000 { - label = "CFG2"; - reg = <0x330000 0x0010000>; - }; - - fs@340000 { - label = "FS"; - reg = <0x340000 0x0080000>; - }; - - priimg@3c0000 { - label = "PriImg"; - reg = <0x3c0000 0x0e10000>; - }; - - secimg@11d0000 { - label = "SecImg"; - reg = <0x11d0000 0x0e10000>; - }; - }; - }; - }; -}; - -&pcie0 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&pcie1 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - }; - }; -}; - -&nand { - status = "okay"; - - pinctrl-0 = <&nand_pins>; - pinctrl-names = "default"; - - nand@0 { - compatible = "qcom,nandcs"; - - reg = <0>; - - nand-ecc-strength = <8>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - ubi@0 { - label = "ubi"; - reg = <0x0000000 0x20000000>; - }; - }; - }; -}; - -&soc { - mdio1: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - - phy1: ethernet-phy@1 { - reg = <1>; - }; - - phy2: ethernet-phy@2 { - reg = <2>; - }; - }; -}; - -&gmac0 { - status = "okay"; - - qcom,id = <0>; - mdiobus = <&mdio1>; - - phy-mode = "rgmii"; - phy-handle = <&phy1>; - - nvmem-cells = <ðaddr 0>; - nvmem-cell-names = "mac-address"; - - fixed-link { - speed = <1000>; - full-duplex; - }; -}; - -&gmac2 { - status = "okay"; - - qcom,id = <2>; - mdiobus = <&mdio1>; - - phy-mode = "sgmii"; - phy-handle = <&phy2>; - - nvmem-cells = <ðaddr 1>; - nvmem-cell-names = "mac-address"; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi deleted file mode 100644 index a8f43591f9..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-cryptid-common.dtsi +++ /dev/null @@ -1,236 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -/ { - memory { - device_type = "memory"; - linux,usable-memory = <0x41500000 0x1ea00000>; - reg = <0x40000000 0x20000000>; - }; - - cpus { - idle-states { - CPU_SPC: spc { - status = "disabled"; - }; - }; - }; - - chosen { - bootargs-append = " console=ttyMSM0,115200n8 ubi.mtd=ubi ubi.mtd=art"; - }; -}; - -&qcom_pinmux { - mdio0_pins_active: mdio0_pins_active { - mux { - pins = "gpio0", "gpio1"; - function = "mdio"; - drive-strength = <2>; - bias-pull-down; - output-low; - }; - - clk { - pins = "gpio1"; - input-disable; - }; - }; - - phy_active: phy_active { - phy { - pins = "gpio6", "gpio7"; - function = "gpio"; - drive-strength = <2>; - bias-pull-down; - output-high; - }; - }; - - uart1_pins: uart1_pins { - mux { - pins = "gpio51", "gpio52"; - function = "gsbi1"; - drive-strength = <4>; - bias-disable; - }; - }; -}; - -&gsbi1 { - status = "okay"; - qcom,mode = ; - - serial@12450000 { - status = "okay"; - - pinctrl-0 = <&uart1_pins>; - pinctrl-names = "default"; - }; -}; - -&pcie0 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; - - bridge@0,0 { - reg = <0x0 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi0: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x10000 0 0 0 0>; - }; - }; -}; - -&pcie1 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; - - bridge@0,0 { - reg = <0x0 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi1: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x10000 0 0 0 0>; - }; - }; -}; - -&pcie2 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; - - bridge@0,0 { - reg = <0x0 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi2: wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x10000 0 0 0 0>; - }; - }; -}; - -&adm_dma { - status = "okay"; -}; - -&nand { - status = "okay"; - - nand@0 { - compatible = "qcom,nandcs"; - - reg = <0>; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - nand-is-boot-medium; - qcom,boot-partitions = <0x0 0x2140000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "sbl1"; - reg = <0x0 0x40000>; - read-only; - }; - - partition@40000 { - label = "mibib"; - reg = <0x40000 0x140000>; - read-only; - }; - - partition@180000 { - label = "sbl2"; - reg = <0x180000 0x140000>; - read-only; - }; - - partition@2c0000 { - label = "sbl3"; - reg = <0x2c0000 0x280000>; - read-only; - }; - - partition@540000 { - label = "ddrconfig"; - reg = <0x540000 0x120000>; - read-only; - }; - - partition@660000 { - label = "ssd"; - reg = <0x660000 0x120000>; - read-only; - }; - - partition@780000 { - label = "tz"; - reg = <0x780000 0x280000>; - read-only; - }; - - partition@a00000 { - label = "rpm"; - reg = <0xa00000 0x280000>; - read-only; - }; - - partition@1fc0000 { - label = "u-boot"; - reg = <0x1fc0000 0x180000>; - read-only; - }; - - partition@21c0000 { - label = "bootkernel1"; - reg = <0x21c0000 0xa80000>; - }; - - partition@2c40000 { - label = "bootkernel2"; - reg = <0x2c40000 0xa80000>; - }; - - partition@36c0000 { - label = "ubi"; - reg = <0x36c0000 0x46c0000>; - }; - - partition@7d80000 { - label = "art"; - reg = <0x7d80000 0x200000>; - read-only; - }; - }; - }; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts deleted file mode 100644 index 9f6c5fb696..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-ecw5410.dts +++ /dev/null @@ -1,332 +0,0 @@ -#include "qcom-ipq8064-v2.0-smb208.dtsi" - -#include -#include -#include - -/ { - model = "Edgecore ECW5410"; - compatible = "edgecore,ecw5410", "qcom,ipq8064"; - - reserved-memory { - nss@40000000 { - reg = <0x40000000 0x1000000>; - no-map; - }; - - smem: smem@41000000 { - reg = <0x41000000 0x200000>; - no-map; - }; - - wifi_dump@44000000 { - reg = <0x44000000 0x600000>; - no-map; - }; - }; - - cpus { - idle-states { - CPU_SPC: spc { - status = "disabled"; - }; - }; - }; - - aliases { - serial1 = &gsbi1_serial; - ethernet0 = &gmac2; - ethernet1 = &gmac3; - - led-boot = &led_power_green; - led-failsafe = &led_power_red; - led-running = &led_power_green; - led-upgrade = &led_power_green; - }; - - chosen { - bootargs-append = " console=ttyMSM0,115200n8 root=/dev/ubiblock0_1"; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_power_green: power_green { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>; - }; - - wlan2g_green { - label = "green:wlan2g"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_LOW>; - }; - - wlan2g_yellow { - label = "yellow:wlan2g"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>; - }; - - wlan5g_green { - label = "green:wlan5g"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - led_power_red: power_red { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 28 GPIO_ACTIVE_LOW>; - }; - - wlan5g_yellow { - label = "yellow:wlan5g"; - gpios = <&qcom_pinmux 59 GPIO_ACTIVE_LOW>; - }; - }; -}; - - -&qcom_pinmux { - spi_pins: spi_pins { - mux { - pins = "gpio18", "gpio19"; - function = "gsbi5"; - drive-strength = <10>; - bias-pull-down; - }; - - clk { - pins = "gpio21"; - function = "gsbi5"; - drive-strength = <12>; - bias-pull-down; - }; - - cs { - pins = "gpio20"; - function = "gpio"; - drive-strength = <10>; - bias-pull-up; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio16", "gpio23", "gpio24", "gpio26", - "gpio28", "gpio59"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio25"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - uart1_pins: uart1_pins { - mux { - pins = "gpio51", "gpio52", "gpio53", "gpio54"; - function = "gsbi1"; - drive-strength = <12>; - bias-none; - }; - }; -}; - -&gsbi1 { - qcom,mode = ; - status = "okay"; - - serial@12450000 { - status = "okay"; - - pinctrl-0 = <&uart1_pins>; - pinctrl-names = "default"; - }; -}; - -&gsbi5 { - qcom,mode = ; - status = "okay"; - - spi4: spi@1a280000 { - status = "okay"; - spi-max-frequency = <50000000>; - - pinctrl-0 = <&spi_pins>; - pinctrl-names = "default"; - - cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>; - - m25p80@0 { - compatible = "jedec,spi-nor"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - partitions { - compatible = "qcom,smem-part"; - }; - }; - }; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; - -&pcie1 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L"; - }; - }; -}; - -&pcie2 { - status = "okay"; - - /delete-property/ pinctrl-0; - /delete-property/ pinctrl-names; - /delete-property/ perst-gpios; - - bridge@0,0 { - reg = <0x00000000 0 0 0 0>; - #address-cells = <3>; - #size-cells = <2>; - ranges; - - wifi@1,0 { - compatible = "qcom,ath10k"; - status = "okay"; - reg = <0x00010000 0 0 0 0>; - qcom,ath10k-calibration-variant = "Edgecore-ECW5410-L"; - }; - }; -}; - -&nand { - status = "okay"; - - nand@0 { - compatible = "qcom,nandcs"; - - reg = <0>; - - nand-ecc-strength = <4>; - nand-bus-width = <8>; - nand-ecc-step-size = <512>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - rootfs1@0 { - label = "rootfs1"; - reg = <0x0000000 0x4000000>; - }; - - rootfs2@4000000 { - label = "rootfs2"; - reg = <0x4000000 0x4000000>; - }; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins>; - pinctrl-names = "default"; - - phy0: ethernet-phy@0 { - reg = <0>; - }; - - phy1: ethernet-phy@1 { - reg = <1>; - }; -}; - -&gmac2 { - status = "okay"; - - qcom,id = <2>; - mdiobus = <&mdio0>; - - phy-mode = "sgmii"; - phy-handle = <&phy1>; -}; - -&gmac3 { - status = "okay"; - - qcom,id = <3>; - mdiobus = <&mdio0>; - - phy-mode = "sgmii"; - phy-handle = <&phy0>; -}; - -&adm_dma { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-mr42.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-mr42.dts deleted file mode 100644 index 7ec11de56b..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-mr42.dts +++ /dev/null @@ -1,233 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq8068-cryptid-common.dtsi" - -#include -#include - -/ { - model = "Meraki MR42"; - compatible = "meraki,mr42", "qcom,ipq8064"; - - aliases { - serial1 = &gsbi1_serial; - ethernet0 = &gmac3; - - led-boot = &led_active; - led-failsafe = &led_power; - led-running = &led_active; - led-upgrade = &led_active; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_power: power { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 31 GPIO_ACTIVE_HIGH>; - }; - - led_active: active { - label = "white:active"; - gpios = <&qcom_pinmux 32 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gmac3 { - status = "okay"; - - qcom,id = <3>; - mdiobus = <&mdio0>; - - phy-mode = "sgmii"; - phy-handle = <&phy2>; - - nvmem-cells = <&mac_address 0>; - nvmem-cell-names = "mac-address"; -}; - -&gsbi2 { - status = "okay"; - qcom,mode = ; -}; - -&gsbi2_i2c { - status = "okay"; - - pinctrl-0 = <&i2c0_pins>; - pinctrl-names = "default"; - - ina2xx@40 { - compatible = "ina219"; - shunt-resistor = <40000>; - reg = <0x40>; - }; - - eeprom@56 { - compatible = "atmel,24c64"; - pagesize = <32>; - reg = <0x56>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - mac_address: mac-address@66 { - compatible = "mac-base"; - reg = <0x66 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; -}; - -&gsbi6 { - qcom,mode = ; - status = "okay"; -}; - -&gsbi6_i2c { - status = "okay"; - - pinctrl-0 = <&i2c1_pins>; - pinctrl-names = "default"; - - tlc591xx@40 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,tlc59108"; - reg = <0x40>; - - red@0 { - label = "red:user"; - reg = <0x0>; - }; - - green@1 { - label = "green:user"; - reg = <0x1>; - }; - - blue@2 { - label = "blue:user"; - reg = <0x2>; - }; - }; -}; - -&mdio0 { - status = "okay"; - - pinctrl-0 = <&mdio0_pins_active>, <&phy_active>; - pinctrl-names = "default"; - - phy2: ethernet-phy2 { - reg = <2>; - - reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - reset-assert-us = <24000>; - - eee-broken-100tx; - eee-broken-1000t; - }; -}; - -&qcom_pinmux { - i2c0_pins: i2c0_pins { - mux { - pins = "gpio24", "gpio25"; - function = "gsbi2"; - drive-strength = <2>; - bias-pull-up; - input; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio26"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - }; - }; - - i2c1_pins: i2c1_pins { - mux { - pins = "gpio29", "gpio30"; - function = "gsbi6"; - drive-strength = <2>; - bias-pull-up; - input; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio31", "gpio32"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-low; - }; - }; -}; - -&wifi0 { - nvmem-cells = <&mac_address 1>; - nvmem-cell-names = "mac-address"; -}; - -&wifi1 { - nvmem-cells = <&mac_address 2>; - nvmem-cell-names = "mac-address"; -}; - -&wifi2 { - nvmem-cells = <&mac_address 3>; - nvmem-cell-names = "mac-address"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-mr52.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-mr52.dts deleted file mode 100644 index 7512bfb74f..0000000000 --- a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8068-mr52.dts +++ /dev/null @@ -1,258 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 OR MIT - -#include "qcom-ipq8068-cryptid-common.dtsi" - -#include -#include - -/ { - model = "Meraki MR52"; - compatible = "meraki,mr52", "qcom,ipq8064"; - - aliases { - serial1 = &gsbi1_serial; - mdio-gpio0 = &mdio_gpio0; - ethernet0 = &gmac2; - ethernet1 = &gmac3; - - led-boot = &led_active; - led-failsafe = &led_power; - led-running = &led_active; - led-upgrade = &led_active; - }; - - keys { - compatible = "gpio-keys"; - pinctrl-0 = <&button_pins>; - pinctrl-names = "default"; - - reset { - label = "reset"; - gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - wakeup-source; - }; - }; - - leds { - compatible = "gpio-leds"; - pinctrl-0 = <&led_pins>; - pinctrl-names = "default"; - - led_power: power { - function = LED_FUNCTION_POWER; - color = ; - gpios = <&qcom_pinmux 19 GPIO_ACTIVE_HIGH>; - }; - - lan2_green { - label = "green:lan2"; - gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>; - }; - - lan1_green { - label = "green:lan1"; - gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>; - }; - - led_active: active { - label = "white:active"; - gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>; - }; - - lan2_orange { - label = "orange:lan2"; - gpios = <&qcom_pinmux 60 GPIO_ACTIVE_HIGH>; - }; - - lan1_orange { - label = "orange:lan1"; - gpios = <&qcom_pinmux 62 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&gmac2 { - status = "okay"; - - qcom,id = <2>; - mdiobus = <&mdio0>; - - phy-mode = "sgmii"; - phy-handle = <&phy0>; - - nvmem-cells = <&mac_address 0>; - nvmem-cell-names = "mac-address"; -}; - -&gmac3 { - status = "okay"; - - qcom,id = <3>; - mdiobus = <&mdio_gpio0>; - - phy-mode = "sgmii"; - phy-handle = <&phy4>; - - nvmem-cells = <&mac_address 1>; - nvmem-cell-names = "mac-address"; -}; - -&gsbi7 { - status = "okay"; - qcom,mode = ; -}; - -&gsbi7_i2c { - status = "okay"; - - pinctrl-0 = <&i2c_pins>; - pinctrl-names = "default"; - - ina2xx@45 { - compatible = "ina219"; - shunt-resistor = <80000>; - reg = <0x45>; - }; - - tlc591xx@49 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,tlc59108"; - reg = <0x49>; - - red@0 { - label = "red:user"; - reg = <0x0>; - }; - - green@1 { - label = "green:user"; - reg = <0x1>; - }; - - blue@2 { - label = "blue:user"; - reg = <0x2>; - }; - }; - - eeprom@52 { - compatible = "atmel,24c64"; - pagesize = <32>; - reg = <0x52>; - read-only; - - nvmem-layout { - compatible = "fixed-layout"; - #address-cells = <1>; - #size-cells = <1>; - - mac_address: mac-address@66 { - compatible = "mac-base"; - reg = <0x66 0x6>; - #nvmem-cell-cells = <1>; - }; - }; - }; -}; - -&qcom_pinmux { - i2c_pins: i2c_pins { - mux { - pins = "gpio8", "gpio9"; - function = "gsbi7"; - drive-strength = <2>; - bias-pull-up; - input; - }; - }; - - led_pins: led_pins { - mux { - pins = "gpio19", "gpio26"; - function = "gpio"; - drive-strength = <12>; - bias-pull-down; - output-low; - }; - }; - - button_pins: button_pins { - mux { - pins = "gpio25"; - function = "gpio"; - drive-strength = <2>; - bias-pull-up; - input; - }; - }; -}; - -&soc { - mdio_gpio0: mdio { - compatible = "virtual,mdio-gpio"; - #address-cells = <1>; - #size-cells = <0>; - - status = "okay"; - - pinctrl-0 = <&mdio0_pins_active>, <&phy_active>; - pinctrl-names = "default"; - - gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH - &qcom_pinmux 0 GPIO_ACTIVE_HIGH>; - - phy0: ethernet-phy0 { - reg = <0>; - reset-gpios = <&qcom_pinmux 7 GPIO_ACTIVE_LOW>; - reset-assert-us = <24000>; - }; - - phy4: ethernet-phy4 { - reg = <4>; - reset-gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>; - reset-assert-us = <24000>; - }; - }; -}; - -&wifi0 { - nvmem-cells = <&mac_address 4>; - nvmem-cell-names = "mac-address"; -}; - -&wifi1 { - nvmem-cells = <&mac_address 3>; - nvmem-cell-names = "mac-address"; -}; - -&wifi2 { - nvmem-cells = <&mac_address 2>; - nvmem-cell-names = "mac-address"; -}; - -&hs_phy_0 { - status = "okay"; -}; - -&ss_phy_0 { - status = "okay"; -}; - -&usb3_0 { - status = "okay"; -}; - -&hs_phy_1 { - status = "okay"; -}; - -&ss_phy_1 { - status = "okay"; -}; - -&usb3_1 { - status = "okay"; -}; diff --git a/target/linux/ipq806x/patches-6.1/001-v6.2-clk-qcom-kpss-xcc-register-it-as-clk-provider.patch b/target/linux/ipq806x/patches-6.1/001-v6.2-clk-qcom-kpss-xcc-register-it-as-clk-provider.patch deleted file mode 100644 index 9395f1b241..0000000000 --- a/target/linux/ipq806x/patches-6.1/001-v6.2-clk-qcom-kpss-xcc-register-it-as-clk-provider.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 09be1a39e685d8c5edd471fd1cac9a8f8280d2de Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Tue, 8 Nov 2022 22:17:34 +0100 -Subject: [PATCH] clk: qcom: kpss-xcc: register it as clk provider - -krait-cc use this driver for the secondary mux. Register it as a clk -provider to correctly use this clk in other drivers. - -Signed-off-by: Christian Marangi -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221108211734.3707-1-ansuelsmth@gmail.com ---- - drivers/clk/qcom/kpss-xcc.c | 13 +++++++++---- - 1 file changed, 9 insertions(+), 4 deletions(-) - ---- a/drivers/clk/qcom/kpss-xcc.c -+++ b/drivers/clk/qcom/kpss-xcc.c -@@ -31,12 +31,13 @@ MODULE_DEVICE_TABLE(of, kpss_xcc_match_t - - static int kpss_xcc_driver_probe(struct platform_device *pdev) - { -+ struct device *dev = &pdev->dev; - const struct of_device_id *id; - void __iomem *base; - struct clk_hw *hw; - const char *name; - -- id = of_match_device(kpss_xcc_match_table, &pdev->dev); -+ id = of_match_device(kpss_xcc_match_table, dev); - if (!id) - return -ENODEV; - -@@ -45,7 +46,7 @@ static int kpss_xcc_driver_probe(struct - return PTR_ERR(base); - - if (id->data) { -- if (of_property_read_string_index(pdev->dev.of_node, -+ if (of_property_read_string_index(dev->of_node, - "clock-output-names", - 0, &name)) - return -ENODEV; -@@ -55,12 +56,16 @@ static int kpss_xcc_driver_probe(struct - base += 0x28; - } - -- hw = devm_clk_hw_register_mux_parent_data_table(&pdev->dev, name, aux_parents, -+ hw = devm_clk_hw_register_mux_parent_data_table(dev, name, aux_parents, - ARRAY_SIZE(aux_parents), 0, - base, 0, 0x3, - 0, aux_parent_map, NULL); -+ if (IS_ERR(hw)) -+ return PTR_ERR(hw); - -- return PTR_ERR_OR_ZERO(hw); -+ of_clk_add_hw_provider(dev->of_node, of_clk_hw_simple_get, hw); -+ -+ return 0; - } - - static struct platform_driver kpss_xcc_driver = { diff --git a/target/linux/ipq806x/patches-6.1/002-v6.2-01-clk-qcom-krait-cc-use-devm-variant-for-clk-notifier-.patch b/target/linux/ipq806x/patches-6.1/002-v6.2-01-clk-qcom-krait-cc-use-devm-variant-for-clk-notifier-.patch deleted file mode 100644 index 65c1fc17f2..0000000000 --- a/target/linux/ipq806x/patches-6.1/002-v6.2-01-clk-qcom-krait-cc-use-devm-variant-for-clk-notifier-.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 3198106a99e73dbc4c02bd5128cec0997c73af82 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Tue, 8 Nov 2022 22:58:27 +0100 -Subject: [PATCH 1/6] clk: qcom: krait-cc: use devm variant for clk notifier - register - -Use devm variant for clk notifier register and correctly handle free -resource on driver remove. - -Signed-off-by: Christian Marangi -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221108215827.30475-1-ansuelsmth@gmail.com ---- - drivers/clk/qcom/krait-cc.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clk/qcom/krait-cc.c -+++ b/drivers/clk/qcom/krait-cc.c -@@ -62,7 +62,7 @@ static int krait_notifier_register(struc - int ret = 0; - - mux->clk_nb.notifier_call = krait_notifier_cb; -- ret = clk_notifier_register(clk, &mux->clk_nb); -+ ret = devm_clk_notifier_register(dev, clk, &mux->clk_nb); - if (ret) - dev_err(dev, "failed to register clock notifier: %d\n", ret); - diff --git a/target/linux/ipq806x/patches-6.1/002-v6.2-02-clk-qcom-krait-cc-fix-wrong-parent-order-for-seconda.patch b/target/linux/ipq806x/patches-6.1/002-v6.2-02-clk-qcom-krait-cc-fix-wrong-parent-order-for-seconda.patch deleted file mode 100644 index 2dcb69399c..0000000000 --- a/target/linux/ipq806x/patches-6.1/002-v6.2-02-clk-qcom-krait-cc-fix-wrong-parent-order-for-seconda.patch +++ /dev/null @@ -1,46 +0,0 @@ -From 8e456411abcbf899c04740b9dbb3dcefcd61c946 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Wed, 9 Nov 2022 01:56:27 +0100 -Subject: [PATCH 2/6] clk: qcom: krait-cc: fix wrong parent order for secondary - mux - -The secondary mux parent order is swapped. -This currently doesn't cause problems as the secondary mux is used for idle -clk and as a safe clk source while reprogramming the hfpll. - -Each mux have 2 or more output but he always have a safe source to -switch while reprogramming the connected pll. We use a clk notifier to -switch to the correct parent before clk core can apply the correct rate. -The parent to switch is hardcoded in the mux struct. - -For the secondary mux the safe source to use is the qsb parent as it's -the only fixed clk as the acpus_aux is a pll that can source from pxo or -from pll8. - -The hardcoded safe parent for the secondary mux is set to index 0 that -in the secondary mux map is set to 2. - -But the index 0 is actually acpu_aux in the parent list. - -Fix the swapped parents to correctly handle idle frequency and output a -sane clk_summary report. - -Signed-off-by: Christian Marangi -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221109005631.3189-1-ansuelsmth@gmail.com ---- - drivers/clk/qcom/krait-cc.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clk/qcom/krait-cc.c -+++ b/drivers/clk/qcom/krait-cc.c -@@ -116,8 +116,8 @@ krait_add_sec_mux(struct device *dev, in - int ret; - struct krait_mux_clk *mux; - static const char *sec_mux_list[] = { -- "acpu_aux", - "qsb", -+ "acpu_aux", - }; - struct clk_init_data init = { - .parent_names = sec_mux_list, diff --git a/target/linux/ipq806x/patches-6.1/002-v6.2-03-clk-qcom-krait-cc-also-enable-secondary-mux-and-div-.patch b/target/linux/ipq806x/patches-6.1/002-v6.2-03-clk-qcom-krait-cc-also-enable-secondary-mux-and-div-.patch deleted file mode 100644 index 6261a940d7..0000000000 --- a/target/linux/ipq806x/patches-6.1/002-v6.2-03-clk-qcom-krait-cc-also-enable-secondary-mux-and-div-.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 18ae57b1e8abee6c453381470f6e18991d2901a8 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Wed, 9 Nov 2022 01:56:28 +0100 -Subject: [PATCH 3/6] clk: qcom: krait-cc: also enable secondary mux and div - clk - -clk-krait ignore any rate change if clk is not flagged as enabled. -Correctly enable the secondary mux and div clk to correctly change rate -instead of silently ignoring the request. - -Signed-off-by: Christian Marangi -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221109005631.3189-2-ansuelsmth@gmail.com ---- - drivers/clk/qcom/krait-cc.c | 21 ++++++++++++++++++++- - 1 file changed, 20 insertions(+), 1 deletion(-) - ---- a/drivers/clk/qcom/krait-cc.c -+++ b/drivers/clk/qcom/krait-cc.c -@@ -80,6 +80,7 @@ krait_add_div(struct device *dev, int id - }; - const char *p_names[1]; - struct clk *clk; -+ int cpu; - - div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL); - if (!div) -@@ -103,6 +104,17 @@ krait_add_div(struct device *dev, int id - } - - clk = devm_clk_register(dev, &div->hw); -+ if (IS_ERR(clk)) -+ goto err; -+ -+ /* clk-krait ignore any rate change if mux is not flagged as enabled */ -+ if (id < 0) -+ for_each_online_cpu(cpu) -+ clk_prepare_enable(div->hw.clk); -+ else -+ clk_prepare_enable(div->hw.clk); -+ -+err: - kfree(p_names[0]); - kfree(init.name); - -@@ -113,7 +125,7 @@ static int - krait_add_sec_mux(struct device *dev, int id, const char *s, - unsigned int offset, bool unique_aux) - { -- int ret; -+ int cpu, ret; - struct krait_mux_clk *mux; - static const char *sec_mux_list[] = { - "qsb", -@@ -165,6 +177,13 @@ krait_add_sec_mux(struct device *dev, in - if (ret) - goto unique_aux; - -+ /* clk-krait ignore any rate change if mux is not flagged as enabled */ -+ if (id < 0) -+ for_each_online_cpu(cpu) -+ clk_prepare_enable(mux->hw.clk); -+ else -+ clk_prepare_enable(mux->hw.clk); -+ - unique_aux: - if (unique_aux) - kfree(sec_mux_list[0]); diff --git a/target/linux/ipq806x/patches-6.1/002-v6.2-04-clk-qcom-krait-cc-handle-secondary-mux-sourcing-out-.patch b/target/linux/ipq806x/patches-6.1/002-v6.2-04-clk-qcom-krait-cc-handle-secondary-mux-sourcing-out-.patch deleted file mode 100644 index fabb299f42..0000000000 --- a/target/linux/ipq806x/patches-6.1/002-v6.2-04-clk-qcom-krait-cc-handle-secondary-mux-sourcing-out-.patch +++ /dev/null @@ -1,48 +0,0 @@ -From e5dc1a4c01510da8438dddfdf4200b79d73990dc Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Wed, 9 Nov 2022 01:56:29 +0100 -Subject: [PATCH 4/6] clk: qcom: krait-cc: handle secondary mux sourcing out of - acpu_aux - -Some bootloader may leave the system in an even more undefined state -with the secondary mux of L2 or other cores sourcing out of the acpu_aux -parent. This results in the clk set to the PXO rate or a PLL8 rate. - -The current logic to reset the mux and set them to a defined state only -handle if the mux are configured to source out of QSB. Change this and -force a new and defined state if the current clk is lower than the aux -rate. This way we can handle any wrong configuration where the mux is -sourcing out of QSB (rate 225MHz, currently set to a virtual rate of 1), -PXO rate (rate 25MHz) or PLL8 (needs to be configured to run at 384Mhz). - -Signed-off-by: Christian Marangi -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221109005631.3189-3-ansuelsmth@gmail.com ---- - drivers/clk/qcom/krait-cc.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/drivers/clk/qcom/krait-cc.c -+++ b/drivers/clk/qcom/krait-cc.c -@@ -383,8 +383,8 @@ static int krait_cc_probe(struct platfor - */ - cur_rate = clk_get_rate(l2_pri_mux_clk); - aux_rate = 384000000; -- if (cur_rate == 1) { -- pr_info("L2 @ QSB rate. Forcing new rate.\n"); -+ if (cur_rate < aux_rate) { -+ pr_info("L2 @ Undefined rate. Forcing new rate.\n"); - cur_rate = aux_rate; - } - clk_set_rate(l2_pri_mux_clk, aux_rate); -@@ -394,8 +394,8 @@ static int krait_cc_probe(struct platfor - for_each_possible_cpu(cpu) { - clk = clks[cpu]; - cur_rate = clk_get_rate(clk); -- if (cur_rate == 1) { -- pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu); -+ if (cur_rate < aux_rate) { -+ pr_info("CPU%d @ Undefined rate. Forcing new rate.\n", cpu); - cur_rate = aux_rate; - } - diff --git a/target/linux/ipq806x/patches-6.1/002-v6.2-05-clk-qcom-krait-cc-convert-to-devm_clk_hw_register.patch b/target/linux/ipq806x/patches-6.1/002-v6.2-05-clk-qcom-krait-cc-convert-to-devm_clk_hw_register.patch deleted file mode 100644 index 049b1fa49f..0000000000 --- a/target/linux/ipq806x/patches-6.1/002-v6.2-05-clk-qcom-krait-cc-convert-to-devm_clk_hw_register.patch +++ /dev/null @@ -1,104 +0,0 @@ -From 8ea9fb841a7e528bc8ae79d726ce951dcf7b46e2 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Wed, 9 Nov 2022 01:56:30 +0100 -Subject: [PATCH 5/6] clk: qcom: krait-cc: convert to devm_clk_hw_register - -clk_register is now deprecated. Convert the driver to devm_clk_hw_register. - -Signed-off-by: Christian Marangi -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221109005631.3189-4-ansuelsmth@gmail.com ---- - drivers/clk/qcom/krait-cc.c | 31 +++++++++++++++++++------------ - 1 file changed, 19 insertions(+), 12 deletions(-) - ---- a/drivers/clk/qcom/krait-cc.c -+++ b/drivers/clk/qcom/krait-cc.c -@@ -79,8 +79,7 @@ krait_add_div(struct device *dev, int id - .flags = CLK_SET_RATE_PARENT, - }; - const char *p_names[1]; -- struct clk *clk; -- int cpu; -+ int cpu, ret; - - div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL); - if (!div) -@@ -103,8 +102,8 @@ krait_add_div(struct device *dev, int id - return -ENOMEM; - } - -- clk = devm_clk_register(dev, &div->hw); -- if (IS_ERR(clk)) -+ ret = devm_clk_hw_register(dev, &div->hw); -+ if (ret) - goto err; - - /* clk-krait ignore any rate change if mux is not flagged as enabled */ -@@ -118,7 +117,7 @@ err: - kfree(p_names[0]); - kfree(init.name); - -- return PTR_ERR_OR_ZERO(clk); -+ return ret; - } - - static int -@@ -137,7 +136,6 @@ krait_add_sec_mux(struct device *dev, in - .ops = &krait_mux_clk_ops, - .flags = CLK_SET_RATE_PARENT, - }; -- struct clk *clk; - - mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); - if (!mux) -@@ -166,14 +164,16 @@ krait_add_sec_mux(struct device *dev, in - if (unique_aux) { - sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s); - if (!sec_mux_list[0]) { -- clk = ERR_PTR(-ENOMEM); -+ ret = -ENOMEM; - goto err_aux; - } - } - -- clk = devm_clk_register(dev, &mux->hw); -+ ret = devm_clk_hw_register(dev, &mux->hw); -+ if (ret) -+ goto unique_aux; - -- ret = krait_notifier_register(dev, clk, mux); -+ ret = krait_notifier_register(dev, mux->hw.clk, mux); - if (ret) - goto unique_aux; - -@@ -189,7 +189,7 @@ unique_aux: - kfree(sec_mux_list[0]); - err_aux: - kfree(init.name); -- return PTR_ERR_OR_ZERO(clk); -+ return ret; - } - - static struct clk * -@@ -241,11 +241,18 @@ krait_add_pri_mux(struct device *dev, in - goto err_p2; - } - -- clk = devm_clk_register(dev, &mux->hw); -+ ret = devm_clk_hw_register(dev, &mux->hw); -+ if (ret) { -+ clk = ERR_PTR(ret); -+ goto err_p3; -+ } -+ -+ clk = mux->hw.clk; - - ret = krait_notifier_register(dev, clk, mux); - if (ret) -- goto err_p3; -+ clk = ERR_PTR(ret); -+ - err_p3: - kfree(p_names[2]); - err_p2: diff --git a/target/linux/ipq806x/patches-6.1/002-v6.2-06-clk-qcom-krait-cc-convert-to-parent_data-API.patch b/target/linux/ipq806x/patches-6.1/002-v6.2-06-clk-qcom-krait-cc-convert-to-parent_data-API.patch deleted file mode 100644 index 453a37dfc0..0000000000 --- a/target/linux/ipq806x/patches-6.1/002-v6.2-06-clk-qcom-krait-cc-convert-to-parent_data-API.patch +++ /dev/null @@ -1,414 +0,0 @@ -From 56a655e1c41a86445cf2de656649ad93424b2a63 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Wed, 9 Nov 2022 01:56:31 +0100 -Subject: [PATCH 6/6] clk: qcom: krait-cc: convert to parent_data API - -Modernize the krait-cc driver to parent-data API and refactor to drop -any use of parent_names. From Documentation all the required clocks should -be declared in DTS so fw_name can be correctly used to get the parents -for all the muxes. .name is also declared to save compatibility with old -DT. - -While at it also drop some hardcoded index and introduce an enum to make -index values more clear. - -Signed-off-by: Christian Marangi -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221109005631.3189-5-ansuelsmth@gmail.com ---- - drivers/clk/qcom/krait-cc.c | 202 ++++++++++++++++++++---------------- - 1 file changed, 112 insertions(+), 90 deletions(-) - ---- a/drivers/clk/qcom/krait-cc.c -+++ b/drivers/clk/qcom/krait-cc.c -@@ -15,6 +15,16 @@ - - #include "clk-krait.h" - -+enum { -+ cpu0_mux = 0, -+ cpu1_mux, -+ cpu2_mux, -+ cpu3_mux, -+ l2_mux, -+ -+ clks_max, -+}; -+ - static unsigned int sec_mux_map[] = { - 2, - 0, -@@ -69,21 +79,23 @@ static int krait_notifier_register(struc - return ret; - } - --static int -+static struct clk_hw * - krait_add_div(struct device *dev, int id, const char *s, unsigned int offset) - { - struct krait_div2_clk *div; -+ static struct clk_parent_data p_data[1]; - struct clk_init_data init = { -- .num_parents = 1, -+ .num_parents = ARRAY_SIZE(p_data), - .ops = &krait_div2_clk_ops, - .flags = CLK_SET_RATE_PARENT, - }; -- const char *p_names[1]; -+ struct clk_hw *clk; -+ char *parent_name; - int cpu, ret; - - div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL); - if (!div) -- return -ENOMEM; -+ return ERR_PTR(-ENOMEM); - - div->width = 2; - div->shift = 6; -@@ -93,18 +105,25 @@ krait_add_div(struct device *dev, int id - - init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s); - if (!init.name) -- return -ENOMEM; -+ return ERR_PTR(-ENOMEM); - -- init.parent_names = p_names; -- p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); -- if (!p_names[0]) { -- kfree(init.name); -- return -ENOMEM; -+ init.parent_data = p_data; -+ parent_name = kasprintf(GFP_KERNEL, "hfpll%s", s); -+ if (!parent_name) { -+ clk = ERR_PTR(-ENOMEM); -+ goto err_parent_name; - } - -+ p_data[0].fw_name = parent_name; -+ p_data[0].name = parent_name; -+ - ret = devm_clk_hw_register(dev, &div->hw); -- if (ret) -- goto err; -+ if (ret) { -+ clk = ERR_PTR(ret); -+ goto err_clk; -+ } -+ -+ clk = &div->hw; - - /* clk-krait ignore any rate change if mux is not flagged as enabled */ - if (id < 0) -@@ -113,33 +132,36 @@ krait_add_div(struct device *dev, int id - else - clk_prepare_enable(div->hw.clk); - --err: -- kfree(p_names[0]); -+err_clk: -+ kfree(parent_name); -+err_parent_name: - kfree(init.name); - -- return ret; -+ return clk; - } - --static int -+static struct clk_hw * - krait_add_sec_mux(struct device *dev, int id, const char *s, - unsigned int offset, bool unique_aux) - { - int cpu, ret; - struct krait_mux_clk *mux; -- static const char *sec_mux_list[] = { -- "qsb", -- "acpu_aux", -+ static struct clk_parent_data sec_mux_list[2] = { -+ { .name = "qsb", .fw_name = "qsb" }, -+ {}, - }; - struct clk_init_data init = { -- .parent_names = sec_mux_list, -+ .parent_data = sec_mux_list, - .num_parents = ARRAY_SIZE(sec_mux_list), - .ops = &krait_mux_clk_ops, - .flags = CLK_SET_RATE_PARENT, - }; -+ struct clk_hw *clk; -+ char *parent_name; - - mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); - if (!mux) -- return -ENOMEM; -+ return ERR_PTR(-ENOMEM); - - mux->offset = offset; - mux->lpl = id >= 0; -@@ -159,23 +181,33 @@ krait_add_sec_mux(struct device *dev, in - - init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); - if (!init.name) -- return -ENOMEM; -+ return ERR_PTR(-ENOMEM); - - if (unique_aux) { -- sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s); -- if (!sec_mux_list[0]) { -- ret = -ENOMEM; -+ parent_name = kasprintf(GFP_KERNEL, "acpu%s_aux", s); -+ if (!parent_name) { -+ clk = ERR_PTR(-ENOMEM); - goto err_aux; - } -+ sec_mux_list[1].fw_name = parent_name; -+ sec_mux_list[1].name = parent_name; -+ } else { -+ sec_mux_list[1].name = "apu_aux"; - } - - ret = devm_clk_hw_register(dev, &mux->hw); -- if (ret) -- goto unique_aux; -+ if (ret) { -+ clk = ERR_PTR(ret); -+ goto err_clk; -+ } -+ -+ clk = &mux->hw; - - ret = krait_notifier_register(dev, mux->hw.clk, mux); -- if (ret) -- goto unique_aux; -+ if (ret) { -+ clk = ERR_PTR(ret); -+ goto err_clk; -+ } - - /* clk-krait ignore any rate change if mux is not flagged as enabled */ - if (id < 0) -@@ -184,28 +216,29 @@ krait_add_sec_mux(struct device *dev, in - else - clk_prepare_enable(mux->hw.clk); - --unique_aux: -+err_clk: - if (unique_aux) -- kfree(sec_mux_list[0]); -+ kfree(parent_name); - err_aux: - kfree(init.name); -- return ret; -+ return clk; - } - --static struct clk * --krait_add_pri_mux(struct device *dev, int id, const char *s, -- unsigned int offset) -+static struct clk_hw * -+krait_add_pri_mux(struct device *dev, struct clk_hw *hfpll_div, struct clk_hw *sec_mux, -+ int id, const char *s, unsigned int offset) - { - int ret; - struct krait_mux_clk *mux; -- const char *p_names[3]; -+ static struct clk_parent_data p_data[3]; - struct clk_init_data init = { -- .parent_names = p_names, -- .num_parents = ARRAY_SIZE(p_names), -+ .parent_data = p_data, -+ .num_parents = ARRAY_SIZE(p_data), - .ops = &krait_mux_clk_ops, - .flags = CLK_SET_RATE_PARENT, - }; -- struct clk *clk; -+ struct clk_hw *clk; -+ char *hfpll_name; - - mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL); - if (!mux) -@@ -223,55 +256,44 @@ krait_add_pri_mux(struct device *dev, in - if (!init.name) - return ERR_PTR(-ENOMEM); - -- p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s); -- if (!p_names[0]) { -+ hfpll_name = kasprintf(GFP_KERNEL, "hfpll%s", s); -+ if (!hfpll_name) { - clk = ERR_PTR(-ENOMEM); -- goto err_p0; -+ goto err_hfpll; - } - -- p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s); -- if (!p_names[1]) { -- clk = ERR_PTR(-ENOMEM); -- goto err_p1; -- } -+ p_data[0].fw_name = hfpll_name; -+ p_data[0].name = hfpll_name; - -- p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s); -- if (!p_names[2]) { -- clk = ERR_PTR(-ENOMEM); -- goto err_p2; -- } -+ p_data[1].hw = hfpll_div; -+ p_data[2].hw = sec_mux; - - ret = devm_clk_hw_register(dev, &mux->hw); - if (ret) { - clk = ERR_PTR(ret); -- goto err_p3; -+ goto err_clk; - } - -- clk = mux->hw.clk; -+ clk = &mux->hw; - -- ret = krait_notifier_register(dev, clk, mux); -+ ret = krait_notifier_register(dev, mux->hw.clk, mux); - if (ret) - clk = ERR_PTR(ret); - --err_p3: -- kfree(p_names[2]); --err_p2: -- kfree(p_names[1]); --err_p1: -- kfree(p_names[0]); --err_p0: -+err_clk: -+ kfree(hfpll_name); -+err_hfpll: - kfree(init.name); - return clk; - } - - /* id < 0 for L2, otherwise id == physical CPU number */ --static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux) -+static struct clk_hw *krait_add_clks(struct device *dev, int id, bool unique_aux) - { -- int ret; -+ struct clk_hw *hfpll_div, *sec_mux, *pri_mux; - unsigned int offset; - void *p = NULL; - const char *s; -- struct clk *clk; - - if (id >= 0) { - offset = 0x4501 + (0x1000 * id); -@@ -283,22 +305,23 @@ static struct clk *krait_add_clks(struct - s = "_l2"; - } - -- ret = krait_add_div(dev, id, s, offset); -- if (ret) { -- clk = ERR_PTR(ret); -+ hfpll_div = krait_add_div(dev, id, s, offset); -+ if (IS_ERR(hfpll_div)) { -+ pri_mux = hfpll_div; - goto err; - } - -- ret = krait_add_sec_mux(dev, id, s, offset, unique_aux); -- if (ret) { -- clk = ERR_PTR(ret); -+ sec_mux = krait_add_sec_mux(dev, id, s, offset, unique_aux); -+ if (IS_ERR(sec_mux)) { -+ pri_mux = sec_mux; - goto err; - } - -- clk = krait_add_pri_mux(dev, id, s, offset); -+ pri_mux = krait_add_pri_mux(dev, hfpll_div, sec_mux, id, s, offset); -+ - err: - kfree(p); -- return clk; -+ return pri_mux; - } - - static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data) -@@ -306,7 +329,7 @@ static struct clk *krait_of_get(struct o - unsigned int idx = clkspec->args[0]; - struct clk **clks = data; - -- if (idx >= 5) { -+ if (idx >= clks_max) { - pr_err("%s: invalid clock index %d\n", __func__, idx); - return ERR_PTR(-EINVAL); - } -@@ -327,9 +350,8 @@ static int krait_cc_probe(struct platfor - const struct of_device_id *id; - unsigned long cur_rate, aux_rate; - int cpu; -- struct clk *clk; -- struct clk **clks; -- struct clk *l2_pri_mux_clk; -+ struct clk_hw *mux, *l2_pri_mux; -+ struct clk *clk, **clks; - - id = of_match_device(krait_cc_match_table, dev); - if (!id) -@@ -348,21 +370,21 @@ static int krait_cc_probe(struct platfor - } - - /* Krait configurations have at most 4 CPUs and one L2 */ -- clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL); -+ clks = devm_kcalloc(dev, clks_max, sizeof(*clks), GFP_KERNEL); - if (!clks) - return -ENOMEM; - - for_each_possible_cpu(cpu) { -- clk = krait_add_clks(dev, cpu, id->data); -+ mux = krait_add_clks(dev, cpu, id->data); - if (IS_ERR(clk)) - return PTR_ERR(clk); -- clks[cpu] = clk; -+ clks[cpu] = mux->clk; - } - -- l2_pri_mux_clk = krait_add_clks(dev, -1, id->data); -- if (IS_ERR(l2_pri_mux_clk)) -- return PTR_ERR(l2_pri_mux_clk); -- clks[4] = l2_pri_mux_clk; -+ l2_pri_mux = krait_add_clks(dev, -1, id->data); -+ if (IS_ERR(l2_pri_mux)) -+ return PTR_ERR(l2_pri_mux); -+ clks[l2_mux] = l2_pri_mux->clk; - - /* - * We don't want the CPU or L2 clocks to be turned off at late init -@@ -372,7 +394,7 @@ static int krait_cc_probe(struct platfor - * they take over. - */ - for_each_online_cpu(cpu) { -- clk_prepare_enable(l2_pri_mux_clk); -+ clk_prepare_enable(clks[l2_mux]); - WARN(clk_prepare_enable(clks[cpu]), - "Unable to turn on CPU%d clock", cpu); - } -@@ -388,16 +410,16 @@ static int krait_cc_probe(struct platfor - * two different rates to force a HFPLL reinit under all - * circumstances. - */ -- cur_rate = clk_get_rate(l2_pri_mux_clk); -+ cur_rate = clk_get_rate(clks[l2_mux]); - aux_rate = 384000000; - if (cur_rate < aux_rate) { - pr_info("L2 @ Undefined rate. Forcing new rate.\n"); - cur_rate = aux_rate; - } -- clk_set_rate(l2_pri_mux_clk, aux_rate); -- clk_set_rate(l2_pri_mux_clk, 2); -- clk_set_rate(l2_pri_mux_clk, cur_rate); -- pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000); -+ clk_set_rate(clks[l2_mux], aux_rate); -+ clk_set_rate(clks[l2_mux], 2); -+ clk_set_rate(clks[l2_mux], cur_rate); -+ pr_info("L2 @ %lu KHz\n", clk_get_rate(clks[l2_mux]) / 1000); - for_each_possible_cpu(cpu) { - clk = clks[cpu]; - cur_rate = clk_get_rate(clk); diff --git a/target/linux/ipq806x/patches-6.1/003-v6.2-ARM-dts-qcom-ipq8064-disable-mmc-ddr-1_8v-for-sdcc1.patch b/target/linux/ipq806x/patches-6.1/003-v6.2-ARM-dts-qcom-ipq8064-disable-mmc-ddr-1_8v-for-sdcc1.patch deleted file mode 100644 index 7e65f4cdff..0000000000 --- a/target/linux/ipq806x/patches-6.1/003-v6.2-ARM-dts-qcom-ipq8064-disable-mmc-ddr-1_8v-for-sdcc1.patch +++ /dev/null @@ -1,28 +0,0 @@ -From c9713e4ede1e5d044b64fe4d3cbb84223625637f Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Tue, 25 Oct 2022 01:38:17 +0200 -Subject: [PATCH] ARM: dts: qcom: ipq8064: disable mmc-ddr-1_8v for sdcc1 - -It was reported non working mmc with this option enabled. -Both mmc for ipq8064 are supplied by a fixed 3.3v regulator so mmc can't -be run at 1.8v. -Disable it to restore correct functionality of this SoC feature. - -Tested-by: Hendrik Koerner -Signed-off-by: Christian Marangi -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221024233817.27410-1-ansuelsmth@gmail.com ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 1 - - 1 file changed, 1 deletion(-) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -756,7 +756,6 @@ - non-removable; - cap-sd-highspeed; - cap-mmc-highspeed; -- mmc-ddr-1_8v; - vmmc-supply = <&vsdcc_fixed>; - dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; - dma-names = "tx", "rx"; diff --git a/target/linux/ipq806x/patches-6.1/004-v6.2-01-thermal-drivers-qcom-tsens-Init-debugfs-only-with-su.patch b/target/linux/ipq806x/patches-6.1/004-v6.2-01-thermal-drivers-qcom-tsens-Init-debugfs-only-with-su.patch deleted file mode 100644 index 76df0f5681..0000000000 --- a/target/linux/ipq806x/patches-6.1/004-v6.2-01-thermal-drivers-qcom-tsens-Init-debugfs-only-with-su.patch +++ /dev/null @@ -1,42 +0,0 @@ -From de48d8766afcd97d147699aaff78a338081c9973 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Sat, 22 Oct 2022 14:56:55 +0200 -Subject: [PATCH 1/3] thermal/drivers/qcom/tsens: Init debugfs only with - successful probe - -Calibrate and tsens_register can fail or PROBE_DEFER. This will cause a -double or a wrong init of the debugfs information. Init debugfs only -with successful probe fixing warning about directory already present. - -Signed-off-by: Christian Marangi -Acked-by: Thara Gopinath -Link: https://lore.kernel.org/r/20221022125657.22530-2-ansuelsmth@gmail.com -Signed-off-by: Daniel Lezcano ---- - drivers/thermal/qcom/tsens.c | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) - ---- a/drivers/thermal/qcom/tsens.c -+++ b/drivers/thermal/qcom/tsens.c -@@ -918,8 +918,6 @@ int __init init_common(struct tsens_priv - if (tsens_version(priv) >= VER_0_1) - tsens_enable_irq(priv); - -- tsens_debug_init(op); -- - err_put_device: - put_device(&op->dev); - return ret; -@@ -1156,7 +1154,11 @@ static int tsens_probe(struct platform_d - } - } - -- return tsens_register(priv); -+ ret = tsens_register(priv); -+ if (!ret) -+ tsens_debug_init(pdev); -+ -+ return ret; - } - - static int tsens_remove(struct platform_device *pdev) diff --git a/target/linux/ipq806x/patches-6.1/004-v6.2-02-thermal-drivers-qcom-tsens-Fix-wrong-version-id-dbg_.patch b/target/linux/ipq806x/patches-6.1/004-v6.2-02-thermal-drivers-qcom-tsens-Fix-wrong-version-id-dbg_.patch deleted file mode 100644 index 10f1e36b58..0000000000 --- a/target/linux/ipq806x/patches-6.1/004-v6.2-02-thermal-drivers-qcom-tsens-Fix-wrong-version-id-dbg_.patch +++ /dev/null @@ -1,29 +0,0 @@ -From c7e077e921fa94e0c06c8d14af6c0504c8a5f4bd Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Sat, 22 Oct 2022 14:56:56 +0200 -Subject: [PATCH 2/3] thermal/drivers/qcom/tsens: Fix wrong version id - dbg_version_show - -For VER_0 the version was incorrectly reported as 0.1.0. - -Fix that and correctly report the major version for this old tsens -revision. - -Signed-off-by: Christian Marangi -Link: https://lore.kernel.org/r/20221022125657.22530-3-ansuelsmth@gmail.com -Signed-off-by: Daniel Lezcano ---- - drivers/thermal/qcom/tsens.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/thermal/qcom/tsens.c -+++ b/drivers/thermal/qcom/tsens.c -@@ -692,7 +692,7 @@ static int dbg_version_show(struct seq_f - return ret; - seq_printf(s, "%d.%d.%d\n", maj_ver, min_ver, step_ver); - } else { -- seq_puts(s, "0.1.0\n"); -+ seq_printf(s, "0.%d.0\n", priv->feat->ver_major); - } - - return 0; diff --git a/target/linux/ipq806x/patches-6.1/004-v6.2-03-thermal-drivers-qcom-tsens-Rework-debugfs-file-struc.patch b/target/linux/ipq806x/patches-6.1/004-v6.2-03-thermal-drivers-qcom-tsens-Rework-debugfs-file-struc.patch deleted file mode 100644 index 63cce7974b..0000000000 --- a/target/linux/ipq806x/patches-6.1/004-v6.2-03-thermal-drivers-qcom-tsens-Rework-debugfs-file-struc.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 89992d95ed1046338c7866ef7bbe6de543a2af91 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Sat, 22 Oct 2022 14:56:57 +0200 -Subject: [PATCH 3/3] thermal/drivers/qcom/tsens: Rework debugfs file structure - -The current tsens debugfs structure is composed by: -- a tsens dir in debugfs with a version file -- a directory for each tsens istance with sensors file to dump all the - sensors value. - -This works on the assumption that we have the same version for each -istance but this assumption seems fragile and with more than one tsens -istance results in the version file not tracking each of them. - -A better approach is to just create a subdirectory for each tsens -istance and put there version and sensors debugfs file. - -Using this new implementation results in less code since debugfs entry -are created only on successful tsens probe. - -Signed-off-by: Christian Marangi -Link: https://lore.kernel.org/r/20221022125657.22530-4-ansuelsmth@gmail.com -Signed-off-by: Daniel Lezcano ---- - drivers/thermal/qcom/tsens.c | 13 +++---------- - 1 file changed, 3 insertions(+), 10 deletions(-) - ---- a/drivers/thermal/qcom/tsens.c -+++ b/drivers/thermal/qcom/tsens.c -@@ -704,21 +704,14 @@ DEFINE_SHOW_ATTRIBUTE(dbg_sensors); - static void tsens_debug_init(struct platform_device *pdev) - { - struct tsens_priv *priv = platform_get_drvdata(pdev); -- struct dentry *root, *file; - -- root = debugfs_lookup("tsens", NULL); -- if (!root) -+ priv->debug_root = debugfs_lookup("tsens", NULL); -+ if (!priv->debug_root) - priv->debug_root = debugfs_create_dir("tsens", NULL); -- else -- priv->debug_root = root; -- -- file = debugfs_lookup("version", priv->debug_root); -- if (!file) -- debugfs_create_file("version", 0444, priv->debug_root, -- pdev, &dbg_version_fops); - - /* A directory for each instance of the TSENS IP */ - priv->debug = debugfs_create_dir(dev_name(&pdev->dev), priv->debug_root); -+ debugfs_create_file("version", 0444, priv->debug, pdev, &dbg_version_fops); - debugfs_create_file("sensors", 0444, priv->debug, pdev, &dbg_sensors_fops); - } - #else diff --git a/target/linux/ipq806x/patches-6.1/102-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch b/target/linux/ipq806x/patches-6.1/102-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch deleted file mode 100644 index e0c195f1ab..0000000000 --- a/target/linux/ipq806x/patches-6.1/102-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 5001f2e1a325b68dbf225bd17f69a4d3d975cca5 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 9 Mar 2017 09:31:44 +0100 -Subject: [PATCH 61/69] mtd: "rootfs" conflicts with OpenWrt auto mounting - -Signed-off-by: John Crispin ---- - drivers/mtd/mtdpart.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/mtd/mtdpart.c -+++ b/drivers/mtd/mtdpart.c -@@ -51,7 +51,11 @@ static struct mtd_info *allocate_partiti - - /* allocate the partition structure */ - child = kzalloc(sizeof(*child), GFP_KERNEL); -- name = kstrdup(part->name, GFP_KERNEL); -+ /* "rootfs" conflicts with OpenWrt auto mounting */ -+ if (mtd_type_is_nand(parent) && !strcmp(part->name, "rootfs")) -+ name = "ubi"; -+ else -+ name = kstrdup(part->name, GFP_KERNEL); - if (!name || !child) { - printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n", - parent->name); diff --git a/target/linux/ipq806x/patches-6.1/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch b/target/linux/ipq806x/patches-6.1/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch deleted file mode 100644 index 0a594b2688..0000000000 --- a/target/linux/ipq806x/patches-6.1/107-10-ARM-dts-qcom-add-saw-for-l2-cache-and-kraitcc-for.patch +++ /dev/null @@ -1,89 +0,0 @@ -From bef5018abb7cf94efafdc05087b4c998891ae4ec Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Mon, 17 Jan 2022 23:39:34 +0100 -Subject: [PATCH v3 10/18] ARM: dts: qcom: add saw for l2 cache and kraitcc for - ipq8064 - -Add saw compatible for l2 cache and kraitcc node for ipq8064 dtsi. -Also declare clock-output-names for acc0 and acc1 and qsb fixed clock -for the secondary mux. - -Signed-off-by: Ansuel Smith -Tested-by: Jonathan McDowell ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 34 +++++++++++++++++++++++++++-- - 1 file changed, 32 insertions(+), 2 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -301,6 +301,12 @@ - }; - - clocks { -+ qsb: qsb { -+ compatible = "fixed-clock"; -+ clock-frequency = <225000000>; -+ #clock-cells = <0>; -+ }; -+ - cxo_board: cxo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; -@@ -575,15 +581,30 @@ - clocks = <&gcc PLL8_VOTE>, <&pxo_board>; - clock-names = "pll8_vote", "pxo"; - clock-output-names = "acpu_l2_aux"; -+ #clock-cells = <0>; -+ }; -+ -+ kraitcc: clock-controller { -+ compatible = "qcom,krait-cc-v1"; -+ clocks = <&gcc PLL9>, <&gcc PLL10>, <&gcc PLL12>, -+ <&acc0>, <&acc1>, <&l2cc>, <&qsb>, <&pxo_board>; -+ clock-names = "hfpll0", "hfpll1", "hfpll_l2", -+ "acpu0_aux", "acpu1_aux", "acpu_l2_aux", -+ "qsb", "pxo"; -+ #clock-cells = <1>; - }; - - acc0: clock-controller@2088000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02088000 0x1000>, <0x02008000 0x1000>; -+ clock-output-names = "acpu0_aux"; -+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>; -+ clock-names = "pll8_vote", "pxo"; -+ #clock-cells = <0>; - }; - - saw0: regulator@2089000 { -- compatible = "qcom,saw2"; -+ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon"; - reg = <0x02089000 0x1000>, <0x02009000 0x1000>; - regulator; - }; -@@ -591,14 +612,24 @@ - acc1: clock-controller@2098000 { - compatible = "qcom,kpss-acc-v1"; - reg = <0x02098000 0x1000>, <0x02008000 0x1000>; -+ clock-output-names = "acpu1_aux"; -+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>; -+ clock-names = "pll8_vote", "pxo"; -+ #clock-cells = <0>; - }; - - saw1: regulator@2099000 { -- compatible = "qcom,saw2"; -+ compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon"; - reg = <0x02099000 0x1000>, <0x02009000 0x1000>; - regulator; - }; - -+ saw_l2: regulator@02012000 { -+ compatible = "qcom,saw2", "syscon"; -+ reg = <0x02012000 0x1000>; -+ regulator; -+ }; -+ - nss_common: syscon@03000000 { - compatible = "syscon"; - reg = <0x03000000 0x0000FFFF>; diff --git a/target/linux/ipq806x/patches-6.1/107-13-ARM-dts-qcom-add-opp-table-for-cpu-and-l2-for-ipq.patch b/target/linux/ipq806x/patches-6.1/107-13-ARM-dts-qcom-add-opp-table-for-cpu-and-l2-for-ipq.patch deleted file mode 100644 index 16e924b303..0000000000 --- a/target/linux/ipq806x/patches-6.1/107-13-ARM-dts-qcom-add-opp-table-for-cpu-and-l2-for-ipq.patch +++ /dev/null @@ -1,268 +0,0 @@ -From 076ebb6e1799c4c7a1d2e07510d88b9e9b57b551 Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Tue, 18 Jan 2022 00:03:47 +0100 -Subject: [PATCH v3 13/18] ARM: dts: qcom: add opp table for cpu and l2 for - ipq8064 - -Add opp table for cpu and l2 cache. While the current cpufreq is -the generic one that doesn't scale the L2 cache, we add the l2 -cache opp anyway for the sake of completeness. This will be handy in the -future when a dedicated cpufreq driver is introduced for krait cores -that will correctly scale l2 cache with the core freq. - -Opp-level is set based on the logic of -0: idle level -1: normal level -2: turbo level - -Signed-off-by: Ansuel Smith -Tested-by: Jonathan McDowell ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 99 +++++++++++++++++++++++++++++ - 1 file changed, 99 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -48,6 +48,105 @@ - }; - }; - -+ opp_table_l2: opp_table_l2 { -+ compatible = "operating-points-v2"; -+ -+ opp-384000000 { -+ opp-hz = /bits/ 64 <384000000>; -+ opp-microvolt = <1100000>; -+ clock-latency-ns = <100000>; -+ opp-level = <0>; -+ }; -+ -+ opp-1000000000 { -+ opp-hz = /bits/ 64 <1000000000>; -+ opp-microvolt = <1100000>; -+ clock-latency-ns = <100000>; -+ opp-level = <1>; -+ }; -+ -+ opp-1200000000 { -+ opp-hz = /bits/ 64 <1200000000>; -+ opp-microvolt = <1150000>; -+ clock-latency-ns = <100000>; -+ opp-level = <2>; -+ }; -+ }; -+ -+ opp_table0: opp_table0 { -+ compatible = "operating-points-v2-kryo-cpu"; -+ nvmem-cells = <&speedbin_efuse>; -+ -+ /* -+ * Voltage thresholds are -+ */ -+ opp-384000000 { -+ opp-hz = /bits/ 64 <384000000>; -+ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>; -+ opp-microvolt-speed0-pvs1-v0 = <925000 878750 971250>; -+ opp-microvolt-speed0-pvs2-v0 = <875000 831250 918750>; -+ opp-microvolt-speed0-pvs3-v0 = <800000 760000 840000>; -+ opp-supported-hw = <0x1>; -+ clock-latency-ns = <100000>; -+ opp-level = <0>; -+ }; -+ -+ opp-600000000 { -+ opp-hz = /bits/ 64 <600000000>; -+ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>; -+ opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>; -+ opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>; -+ opp-microvolt-speed0-pvs3-v0 = <850000 807500 892500>; -+ opp-supported-hw = <0x1>; -+ clock-latency-ns = <100000>; -+ opp-level = <1>; -+ }; -+ -+ opp-800000000 { -+ opp-hz = /bits/ 64 <800000000>; -+ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>; -+ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>; -+ opp-microvolt-speed0-pvs2-v0 = <995000 945250 1044750>; -+ opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>; -+ opp-supported-hw = <0x1>; -+ clock-latency-ns = <100000>; -+ opp-level = <1>; -+ }; -+ -+ opp-1000000000 { -+ opp-hz = /bits/ 64 <1000000000>; -+ opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>; -+ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>; -+ opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>; -+ opp-microvolt-speed0-pvs3-v0 = <950000 902500 997500>; -+ opp-supported-hw = <0x1>; -+ clock-latency-ns = <100000>; -+ opp-level = <1>; -+ }; -+ -+ opp-1200000000 { -+ opp-hz = /bits/ 64 <1200000000>; -+ opp-microvolt-speed0-pvs0-v0 = <1200000 1140000 1260000>; -+ opp-microvolt-speed0-pvs1-v0 = <1125000 1068750 1181250>; -+ opp-microvolt-speed0-pvs2-v0 = <1075000 1021250 1128750>; -+ opp-microvolt-speed0-pvs3-v0 = <1000000 950000 1050000>; -+ opp-supported-hw = <0x1>; -+ clock-latency-ns = <100000>; -+ opp-level = <2>; -+ }; -+ -+ opp-1400000000 { -+ opp-hz = /bits/ 64 <1400000000>; -+ opp-microvolt-speed0-pvs0-v0 = <1250000 1187500 1312500>; -+ opp-microvolt-speed0-pvs1-v0 = <1175000 1116250 1233750>; -+ opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>; -+ opp-microvolt-speed0-pvs3-v0 = <1050000 997500 1102500>; -+ opp-supported-hw = <0x1>; -+ clock-latency-ns = <100000>; -+ opp-level = <2>; -+ }; -+ }; -+ - thermal-zones { - sensor0-thermal { - polling-delay-passive = <0>; ---- a/arch/arm/boot/dts/qcom-ipq8065.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8065.dtsi -@@ -6,3 +6,92 @@ - model = "Qualcomm Technologies, Inc. IPQ8065"; - compatible = "qcom,ipq8065", "qcom,ipq8064"; - }; -+ -+&opp_table_l2 { -+ /delete-node/opp-1200000000; -+ -+ opp-1400000000 { -+ opp-hz = /bits/ 64 <1400000000>; -+ opp-microvolt = <1150000>; -+ clock-latency-ns = <100000>; -+ opp-level = <2>; -+ }; -+}; -+ -+&opp_table0 { -+ /* -+ * On ipq8065 1.2 ghz freq is not present -+ * Remove it to make cpufreq work and not -+ * complain for missing definition -+ */ -+ -+ /delete-node/opp-1200000000; -+ -+ /* -+ * Voltage thresholds are -+ */ -+ opp-384000000 { -+ opp-microvolt-speed0-pvs0-v0 = <975000 926250 1023750>; -+ opp-microvolt-speed0-pvs1-v0 = <950000 902500 997500>; -+ opp-microvolt-speed0-pvs2-v0 = <925000 878750 971250>; -+ opp-microvolt-speed0-pvs3-v0 = <900000 855000 945000>; -+ opp-microvolt-speed0-pvs4-v0 = <875000 831250 918750>; -+ opp-microvolt-speed0-pvs5-v0 = <825000 783750 866250>; -+ opp-microvolt-speed0-pvs6-v0 = <775000 736250 813750>; -+ }; -+ -+ opp-600000000 { -+ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>; -+ opp-microvolt-speed0-pvs1-v0 = <975000 926250 1023750>; -+ opp-microvolt-speed0-pvs2-v0 = <950000 902500 997500>; -+ opp-microvolt-speed0-pvs3-v0 = <925000 878750 971250>; -+ opp-microvolt-speed0-pvs4-v0 = <900000 855000 945000>; -+ opp-microvolt-speed0-pvs5-v0 = <850000 807500 892500>; -+ opp-microvolt-speed0-pvs6-v0 = <800000 760000 840000>; -+ }; -+ -+ opp-800000000 { -+ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>; -+ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>; -+ opp-microvolt-speed0-pvs2-v0 = <1000000 950000 1050000>; -+ opp-microvolt-speed0-pvs3-v0 = <975000 926250 1023750>; -+ opp-microvolt-speed0-pvs4-v0 = <950000 902500 997500>; -+ opp-microvolt-speed0-pvs5-v0 = <900000 855000 945000>; -+ opp-microvolt-speed0-pvs6-v0 = <850000 807500 892500>; -+ }; -+ -+ opp-1000000000 { -+ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>; -+ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>; -+ opp-microvolt-speed0-pvs2-v0 = <1050000 997500 1102500>; -+ opp-microvolt-speed0-pvs3-v0 = <1025000 973750 1076250>; -+ opp-microvolt-speed0-pvs4-v0 = <1000000 950000 1050000>; -+ opp-microvolt-speed0-pvs5-v0 = <950000 902500 997500>; -+ opp-microvolt-speed0-pvs6-v0 = <900000 855000 945000>; -+ }; -+ -+ opp-1400000000 { -+ opp-microvolt-speed0-pvs0-v0 = <1175000 1116250 1233750>; -+ opp-microvolt-speed0-pvs1-v0 = <1150000 1092500 1207500>; -+ opp-microvolt-speed0-pvs2-v0 = <1125000 1068750 1181250>; -+ opp-microvolt-speed0-pvs3-v0 = <1100000 1045000 1155000>; -+ opp-microvolt-speed0-pvs4-v0 = <1075000 1021250 1128750>; -+ opp-microvolt-speed0-pvs5-v0 = <1025000 973750 1076250>; -+ opp-microvolt-speed0-pvs6-v0 = <975000 926250 1023750>; -+ opp-level = <1>; -+ }; -+ -+ opp-1725000000 { -+ opp-hz = /bits/ 64 <1725000000>; -+ opp-microvolt-speed0-pvs0-v0 = <1262500 1199375 1325625>; -+ opp-microvolt-speed0-pvs1-v0 = <1225000 1163750 1286250>; -+ opp-microvolt-speed0-pvs2-v0 = <1200000 1140000 1260000>; -+ opp-microvolt-speed0-pvs3-v0 = <1175000 1116250 1233750>; -+ opp-microvolt-speed0-pvs4-v0 = <1150000 1092500 1207500>; -+ opp-microvolt-speed0-pvs5-v0 = <1100000 1045000 1155000>; -+ opp-microvolt-speed0-pvs6-v0 = <1050000 997500 1102500>; -+ opp-supported-hw = <0x1>; -+ clock-latency-ns = <100000>; -+ opp-level = <2>; -+ }; -+}; ---- a/arch/arm/boot/dts/qcom-ipq8062.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8062.dtsi -@@ -6,3 +6,39 @@ - model = "Qualcomm Technologies, Inc. IPQ8062"; - compatible = "qcom,ipq8062", "qcom,ipq8064"; - }; -+ -+&opp_table0 { -+ /delete-node/opp-1200000000; -+ /delete-node/opp-1400000000; -+ -+ /* -+ * Voltage thresholds are -+ */ -+ opp-384000000 { -+ opp-microvolt-speed0-pvs0-v0 = <1000000 950000 1050000>; -+ opp-microvolt-speed0-pvs1-v0 = < 925000 878750 971250>; -+ opp-microvolt-speed0-pvs2-v0 = < 875000 831250 918750>; -+ opp-microvolt-speed0-pvs3-v0 = < 800000 760000 840000>; -+ }; -+ -+ opp-600000000 { -+ opp-microvolt-speed0-pvs0-v0 = <1050000 997500 1102500>; -+ opp-microvolt-speed0-pvs1-v0 = < 975000 926250 1023750>; -+ opp-microvolt-speed0-pvs2-v0 = < 925000 878750 971250>; -+ opp-microvolt-speed0-pvs3-v0 = < 850000 807500 892500>; -+ }; -+ -+ opp-800000000 { -+ opp-microvolt-speed0-pvs0-v0 = <1100000 1045000 1155000>; -+ opp-microvolt-speed0-pvs1-v0 = <1025000 973750 1076250>; -+ opp-microvolt-speed0-pvs2-v0 = < 995000 945250 1044750>; -+ opp-microvolt-speed0-pvs3-v0 = < 900000 855000 945000>; -+ }; -+ -+ opp-1000000000 { -+ opp-microvolt-speed0-pvs0-v0 = <1150000 1092500 1207500>; -+ opp-microvolt-speed0-pvs1-v0 = <1075000 1021250 1128750>; -+ opp-microvolt-speed0-pvs2-v0 = <1025000 973750 1076250>; -+ opp-microvolt-speed0-pvs3-v0 = < 950000 902500 997500>; -+ }; -+}; diff --git a/target/linux/ipq806x/patches-6.1/107-15-ARM-dts-qcom-add-multiple-missing-binding-for-cpu.patch b/target/linux/ipq806x/patches-6.1/107-15-ARM-dts-qcom-add-multiple-missing-binding-for-cpu.patch deleted file mode 100644 index cf27aaa08b..0000000000 --- a/target/linux/ipq806x/patches-6.1/107-15-ARM-dts-qcom-add-multiple-missing-binding-for-cpu.patch +++ /dev/null @@ -1,153 +0,0 @@ -From 211fc0c0a63c99b68663a27182e643316c2d8cbe Mon Sep 17 00:00:00 2001 -From: Ansuel Smith -Date: Tue, 18 Jan 2022 00:07:57 +0100 -Subject: [PATCH v3 15/18] ARM: dts: qcom: add multiple missing binding for cpu - and l2 for ipq8064 - -Add multiple binding for cpu node, l2 node and add idle-states -definition for ipq8064 dtsi. - -Signed-off-by: Ansuel Smith -Tested-by: Jonathan McDowell ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 36 +++++++++++++++++++++++++++++ - 1 file changed, 36 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -30,6 +30,15 @@ - next-level-cache = <&L2>; - qcom,acc = <&acc0>; - qcom,saw = <&saw0>; -+ clocks = <&kraitcc 0>, <&kraitcc 4>; -+ clock-names = "cpu", "l2"; -+ clock-latency = <100000>; -+ operating-points-v2 = <&opp_table0>; -+ voltage-tolerance = <5>; -+ cooling-min-state = <0>; -+ cooling-max-state = <10>; -+ #cooling-cells = <2>; -+ cpu-idle-states = <&CPU_SPC>; - }; - - cpu1: cpu@1 { -@@ -40,11 +49,35 @@ - next-level-cache = <&L2>; - qcom,acc = <&acc1>; - qcom,saw = <&saw1>; -+ clocks = <&kraitcc 1>, <&kraitcc 4>; -+ clock-names = "cpu", "l2"; -+ clock-latency = <100000>; -+ operating-points-v2 = <&opp_table0>; -+ voltage-tolerance = <5>; -+ cooling-min-state = <0>; -+ cooling-max-state = <10>; -+ #cooling-cells = <2>; -+ cpu-idle-states = <&CPU_SPC>; -+ }; -+ -+ idle-states { -+ CPU_SPC: spc { -+ compatible = "qcom,idle-state-spc"; -+ status = "disabled"; -+ entry-latency-us = <400>; -+ exit-latency-us = <900>; -+ min-residency-us = <3000>; -+ }; - }; - - L2: l2-cache { - compatible = "cache"; - cache-level = <2>; -+ qcom,saw = <&saw_l2>; -+ -+ clocks = <&kraitcc 4>; -+ clock-names = "l2"; -+ operating-points-v2 = <&opp_table_l2>; - }; - }; - ---- a/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064-smb208.dtsi -@@ -2,6 +2,18 @@ - - #include "qcom-ipq8064.dtsi" - -+&cpu0 { -+ cpu-supply = <&smb208_s2a>; -+}; -+ -+&cpu1 { -+ cpu-supply = <&smb208_s2b>; -+}; -+ -+&L2 { -+ l2-supply = <&smb208_s1a>; -+}; -+ - &rpm { - smb208_regulators: regulators { - compatible = "qcom,rpm-smb208-regulators"; ---- a/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi -@@ -2,6 +2,18 @@ - - #include "qcom-ipq8064-v2.0.dtsi" - -+&cpu0 { -+ cpu-supply = <&smb208_s2a>; -+}; -+ -+&cpu1 { -+ cpu-supply = <&smb208_s2b>; -+}; -+ -+&L2 { -+ l2-supply = <&smb208_s1a>; -+}; -+ - &rpm { - smb208_regulators: regulators { - compatible = "qcom,rpm-smb208-regulators"; ---- a/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8062-smb208.dtsi -@@ -2,6 +2,18 @@ - - #include "qcom-ipq8062.dtsi" - -+&cpu0 { -+ cpu-supply = <&smb208_s2a>; -+}; -+ -+&cpu1 { -+ cpu-supply = <&smb208_s2b>; -+}; -+ -+&L2 { -+ l2-supply = <&smb208_s1a>; -+}; -+ - &rpm { - smb208_regulators: regulators { - compatible = "qcom,rpm-smb208-regulators"; ---- a/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8065-smb208.dtsi -@@ -2,6 +2,18 @@ - - #include "qcom-ipq8065.dtsi" - -+&cpu0 { -+ cpu-supply = <&smb208_s2a>; -+}; -+ -+&cpu1 { -+ cpu-supply = <&smb208_s2b>; -+}; -+ -+&L2 { -+ l2-supply = <&smb208_s1a>; -+}; -+ - &rpm { - smb208_regulators: regulators { - compatible = "qcom,rpm-smb208-regulators"; diff --git a/target/linux/ipq806x/patches-6.1/108-01-ARM-dts-qcom-fix-wrong-nad_pins-definition-for-ipq80.patch b/target/linux/ipq806x/patches-6.1/108-01-ARM-dts-qcom-fix-wrong-nad_pins-definition-for-ipq80.patch deleted file mode 100644 index 6be9334e7d..0000000000 --- a/target/linux/ipq806x/patches-6.1/108-01-ARM-dts-qcom-fix-wrong-nad_pins-definition-for-ipq80.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 6c94e0184e56f9e9f1f5d5f54b20758433e498d2 Mon Sep 17 00:00:00 2001 -From: Christian 'Ansuel' Marangi -Date: Wed, 15 Jun 2022 16:47:09 +0200 -Subject: [PATCH 1/2] ARM: dts: qcom: fix wrong nad_pins definition for ipq806x - -Fix wrong nand_pings definition for bias-disable pins. - -Signed-off-by: Christian 'Ansuel' Marangi ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 7 ++----- - 1 file changed, 2 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -599,12 +599,9 @@ - }; - - nand_pins: nand_pins { -- mux { -+ disable { - pins = "gpio34", "gpio35", "gpio36", -- "gpio37", "gpio38", "gpio39", -- "gpio40", "gpio41", "gpio42", -- "gpio43", "gpio44", "gpio45", -- "gpio46", "gpio47"; -+ "gpio37", "gpio38"; - function = "nand"; - drive-strength = <10>; - bias-disable; diff --git a/target/linux/ipq806x/patches-6.1/108-02-ARM-dts-qcom-add-MDIO-dedicated-controller-node-for-.patch b/target/linux/ipq806x/patches-6.1/108-02-ARM-dts-qcom-add-MDIO-dedicated-controller-node-for-.patch deleted file mode 100644 index a35bb3874f..0000000000 --- a/target/linux/ipq806x/patches-6.1/108-02-ARM-dts-qcom-add-MDIO-dedicated-controller-node-for-.patch +++ /dev/null @@ -1,188 +0,0 @@ -From 504188183408fac0f61b59f5ed8ea1773fe43669 Mon Sep 17 00:00:00 2001 -From: Christian 'Ansuel' Marangi -Date: Wed, 15 Jun 2022 16:59:30 +0200 -Subject: [PATCH 2/2] ARM: dts: qcom: add MDIO dedicated controller node for - ipq806x - -Add MDIO dedicated controller attached to gmac0 and fix rb3011 dts to -correctly use the new tag. - -Signed-off-by: Christian 'Ansuel' Marangi ---- - arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 134 +++++++++++----------- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++ - 2 files changed, 81 insertions(+), 67 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts -+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts -@@ -25,73 +25,6 @@ - device_type = "memory"; - }; - -- mdio0: mdio-0 { -- status = "okay"; -- compatible = "virtual,mdio-gpio"; -- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, -- <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; -- #address-cells = <1>; -- #size-cells = <0>; -- -- pinctrl-0 = <&mdio0_pins>; -- pinctrl-names = "default"; -- -- switch0: switch@10 { -- compatible = "qca,qca8337"; -- #address-cells = <1>; -- #size-cells = <0>; -- -- dsa,member = <0 0>; -- -- pinctrl-0 = <&sw0_reset_pin>; -- pinctrl-names = "default"; -- -- reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; -- reg = <0x10>; -- -- ports { -- #address-cells = <1>; -- #size-cells = <0>; -- -- switch0cpu: port@0 { -- reg = <0>; -- label = "cpu"; -- ethernet = <&gmac0>; -- phy-mode = "rgmii-id"; -- fixed-link { -- speed = <1000>; -- full-duplex; -- }; -- }; -- -- port@1 { -- reg = <1>; -- label = "sw1"; -- }; -- -- port@2 { -- reg = <2>; -- label = "sw2"; -- }; -- -- port@3 { -- reg = <3>; -- label = "sw3"; -- }; -- -- port@4 { -- reg = <4>; -- label = "sw4"; -- }; -- -- port@5 { -- reg = <5>; -- label = "sw5"; -- }; -- }; -- }; -- }; -- - mdio1: mdio-1 { - status = "okay"; - compatible = "virtual,mdio-gpio"; -@@ -222,6 +155,73 @@ - status = "okay"; - }; - -+&mdio0 { -+ status = "okay"; -+ compatible = "virtual,mdio-gpio"; -+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>, -+ <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pinctrl-0 = <&mdio0_pins>; -+ pinctrl-names = "default"; -+ -+ switch0: switch@10 { -+ compatible = "qca,qca8337"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ dsa,member = <0 0>; -+ -+ pinctrl-0 = <&sw0_reset_pin>; -+ pinctrl-names = "default"; -+ -+ reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>; -+ reg = <0x10>; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ switch0cpu: port@0 { -+ reg = <0>; -+ label = "cpu"; -+ ethernet = <&gmac0>; -+ phy-mode = "rgmii-id"; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ }; -+ }; -+ -+ port@1 { -+ reg = <1>; -+ label = "sw1"; -+ }; -+ -+ port@2 { -+ reg = <2>; -+ label = "sw2"; -+ }; -+ -+ port@3 { -+ reg = <3>; -+ label = "sw3"; -+ }; -+ -+ port@4 { -+ reg = <4>; -+ label = "sw4"; -+ }; -+ -+ port@5 { -+ reg = <5>; -+ label = "sw5"; -+ }; -+ }; -+ }; -+}; -+ - &gmac0 { - status = "okay"; - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -476,6 +476,20 @@ - snps,blen = <16 0 0 0 0 0 0>; - }; - -+ mdio0: mdio@37000000 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ compatible = "qcom,ipq8064-mdio", "syscon"; -+ reg = <0x37000000 0x200000>; -+ resets = <&gcc GMAC_CORE1_RESET>; -+ reset-names = "stmmaceth"; -+ clocks = <&gcc GMAC_CORE1_CLK>; -+ clock-names = "stmmaceth"; -+ -+ status = "disabled"; -+ }; -+ - vsdcc_fixed: vsdcc-regulator { - compatible = "regulator-fixed"; - regulator-name = "SDCC Power"; diff --git a/target/linux/ipq806x/patches-6.1/114-01-devfreq-qcom-Add-L2-Krait-Cache-devfreq-scaling-driv.patch b/target/linux/ipq806x/patches-6.1/114-01-devfreq-qcom-Add-L2-Krait-Cache-devfreq-scaling-driv.patch deleted file mode 100644 index 9de7328879..0000000000 --- a/target/linux/ipq806x/patches-6.1/114-01-devfreq-qcom-Add-L2-Krait-Cache-devfreq-scaling-driv.patch +++ /dev/null @@ -1,235 +0,0 @@ -From b044ae89862132a86fb511648e9c52ea3cdf8c30 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Wed, 5 Aug 2020 14:19:23 +0200 -Subject: [PATCH 1/4] devfreq: qcom: Add L2 Krait Cache devfreq scaling driver - -Qcom L2 Krait CPUs use the generic cpufreq-dt driver and doesn't actually -scale the Cache frequency when the CPU frequency is changed. This -devfreq driver register with the cpu notifier and scale the Cache -based on the max Freq across all core as the CPU cache is shared across -all of them. If provided this also scale the voltage of the regulator -attached to the CPU cache. The scaling logic is based on the CPU freq -and the 3 scaling interval are set by the device dts. - -Signed-off-by: Christian Marangi ---- - drivers/devfreq/Kconfig | 11 ++ - drivers/devfreq/Makefile | 1 + - drivers/devfreq/krait-cache-devfreq.c | 188 ++++++++++++++++++++++++++ - 3 files changed, 200 insertions(+) - create mode 100644 drivers/devfreq/krait-cache-devfreq.c - ---- a/drivers/devfreq/Kconfig -+++ b/drivers/devfreq/Kconfig -@@ -151,6 +151,17 @@ config ARM_SUN8I_A33_MBUS_DEVFREQ - This adds the DEVFREQ driver for the MBUS controller in some - Allwinner sun8i (A33 through H3) and sun50i (A64 and H5) SoCs. - -+config ARM_KRAIT_CACHE_DEVFREQ -+ tristate "Scaling support for Krait CPU Cache Devfreq" -+ depends on ARCH_QCOM || COMPILE_TEST -+ select DEVFREQ_GOV_PASSIVE -+ help -+ This adds the DEVFREQ driver for the Krait CPU L2 Cache shared by all cores. -+ -+ The driver register with the cpufreq notifier and find the right frequency -+ based on the max frequency across all core and the range set in the device -+ dts. If provided this scale also the regulator attached to the l2 cache. -+ - source "drivers/devfreq/event/Kconfig" - - endif # PM_DEVFREQ ---- a/drivers/devfreq/Makefile -+++ b/drivers/devfreq/Makefile -@@ -15,6 +15,7 @@ obj-$(CONFIG_ARM_MEDIATEK_CCI_DEVFREQ) + - obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += rk3399_dmc.o - obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ) += sun8i-a33-mbus.o - obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o -+obj-$(CONFIG_ARM_KRAIT_CACHE_DEVFREQ) += krait-cache-devfreq.o - - # DEVFREQ Event Drivers - obj-$(CONFIG_PM_DEVFREQ_EVENT) += event/ ---- /dev/null -+++ b/drivers/devfreq/krait-cache-devfreq.c -@@ -0,0 +1,181 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "governor.h" -+ -+struct krait_cache_data { -+ struct clk *clk; -+ unsigned long idle_freq; -+ int token; -+}; -+ -+static int krait_cache_config_clk(struct device *dev, struct opp_table *opp_table, -+ struct dev_pm_opp *old_opp, struct dev_pm_opp *opp, -+ void *data, bool scaling_down) -+{ -+ struct krait_cache_data *kdata; -+ unsigned long old_freq, freq; -+ unsigned long idle_freq; -+ struct clk *clk; -+ int ret; -+ -+ kdata = dev_get_drvdata(dev); -+ idle_freq = kdata->idle_freq; -+ clk = kdata->clk; -+ -+ old_freq = dev_pm_opp_get_freq(old_opp); -+ freq = dev_pm_opp_get_freq(opp); -+ -+ /* -+ * Set to idle bin if switching from normal to high bin -+ * or vice versa. It has been notice that a bug is triggered -+ * in cache scaling when more than one bin is scaled, to fix -+ * this we first need to transition to the base rate and then -+ * to target rate -+ */ -+ if (likely(freq != idle_freq && old_freq != idle_freq)) { -+ ret = clk_set_rate(clk, idle_freq); -+ if (ret) -+ return ret; -+ } -+ -+ return clk_set_rate(clk, freq); -+}; -+ -+static int krait_cache_get_cur_freq(struct device *dev, unsigned long *freq) -+{ -+ struct krait_cache_data *data = dev_get_drvdata(dev); -+ -+ *freq = clk_get_rate(data->clk); -+ -+ return 0; -+}; -+ -+static int krait_cache_target(struct device *dev, unsigned long *freq, -+ u32 flags) -+{ -+ struct dev_pm_opp *opp; -+ -+ opp = dev_pm_opp_find_freq_ceil(dev, freq); -+ if (unlikely(IS_ERR(opp))) -+ return PTR_ERR(opp); -+ -+ dev_pm_opp_put(opp); -+ -+ return dev_pm_opp_set_rate(dev, *freq); -+}; -+ -+static int krait_cache_get_dev_status(struct device *dev, -+ struct devfreq_dev_status *stat) -+{ -+ struct krait_cache_data *data = dev_get_drvdata(dev); -+ -+ stat->busy_time = 0; -+ stat->total_time = 0; -+ stat->current_frequency = clk_get_rate(data->clk); -+ -+ return 0; -+}; -+ -+static struct devfreq_dev_profile krait_cache_devfreq_profile = { -+ .target = krait_cache_target, -+ .get_dev_status = krait_cache_get_dev_status, -+ .get_cur_freq = krait_cache_get_cur_freq -+}; -+ -+static struct devfreq_passive_data devfreq_gov_data = { -+ .parent_type = CPUFREQ_PARENT_DEV, -+}; -+ -+static int krait_cache_probe(struct platform_device *pdev) -+{ -+ struct dev_pm_opp_config config = { }; -+ struct device *dev = &pdev->dev; -+ struct krait_cache_data *data; -+ struct devfreq *devfreq; -+ struct dev_pm_opp *opp; -+ struct clk *clk; -+ int ret, token; -+ -+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); -+ if (!data) -+ return -ENOMEM; -+ -+ clk = devm_clk_get(dev, "l2"); -+ if (IS_ERR(clk)) -+ return PTR_ERR(clk); -+ -+ config.regulator_names = (const char *[]){ "l2", NULL }; -+ config.clk_names = (const char *[]){ "l2", NULL }; -+ config.config_clks = krait_cache_config_clk; -+ -+ token = dev_pm_opp_set_config(dev, &config); -+ if (token < 0) -+ return token; -+ -+ ret = devm_pm_opp_of_add_table(dev); -+ if (ret) -+ goto free_opp; -+ -+ opp = dev_pm_opp_find_freq_ceil(dev, &data->idle_freq); -+ if (IS_ERR(opp)) { -+ ret = PTR_ERR(opp); -+ goto free_opp; -+ } -+ dev_pm_opp_put(opp); -+ -+ data->token = token; -+ data->clk = clk; -+ dev_set_drvdata(dev, data); -+ devfreq = devm_devfreq_add_device(dev, &krait_cache_devfreq_profile, -+ DEVFREQ_GOV_PASSIVE, &devfreq_gov_data); -+ if (IS_ERR(devfreq)) { -+ ret = PTR_ERR(devfreq); -+ goto free_opp; -+ } -+ -+ return 0; -+ -+free_opp: -+ dev_pm_opp_clear_config(token); -+ return ret; -+}; -+ -+static int krait_cache_remove(struct platform_device *pdev) -+{ -+ struct krait_cache_data *data = dev_get_drvdata(&pdev->dev); -+ -+ dev_pm_opp_clear_config(data->token); -+ -+ return 0; -+}; -+ -+static const struct of_device_id krait_cache_match_table[] = { -+ { .compatible = "qcom,krait-cache" }, -+ {} -+}; -+ -+static struct platform_driver krait_cache_driver = { -+ .probe = krait_cache_probe, -+ .remove = krait_cache_remove, -+ .driver = { -+ .name = "krait-cache-scaling", -+ .of_match_table = krait_cache_match_table, -+ }, -+}; -+module_platform_driver(krait_cache_driver); -+ -+MODULE_DESCRIPTION("Krait CPU Cache Scaling driver"); -+MODULE_AUTHOR("Christian Marangi "); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq806x/patches-6.1/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch b/target/linux/ipq806x/patches-6.1/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch deleted file mode 100644 index 45f05dd423..0000000000 --- a/target/linux/ipq806x/patches-6.1/114-02-ARM-dts-qcom-add-krait-cache-compatible-for-ipq806x-.patch +++ /dev/null @@ -1,50 +0,0 @@ -From ef124ad0ff8abfbf4ebe3fe6d7dcef4541dec13a Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 16 Jun 2022 18:39:21 +0200 -Subject: [PATCH] ARM: dts: qcom: add krait-cache compatible for ipq806x dtsi - -Add qcom,krait-cache compatible to enable cache devfreq driver for -ipq806x SoC and move the L2 node to the soc node to make the devfreq -driver correctly probe. - -Signed-off-by: Christian Marangi ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 22 +++++++++++----------- - 1 file changed, 11 insertions(+), 11 deletions(-) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -69,16 +69,6 @@ - min-residency-us = <3000>; - }; - }; -- -- L2: l2-cache { -- compatible = "cache"; -- cache-level = <2>; -- qcom,saw = <&saw_l2>; -- -- clocks = <&kraitcc 4>; -- clock-names = "l2"; -- operating-points-v2 = <&opp_table_l2>; -- }; - }; - - opp_table_l2: opp_table_l2 { -@@ -1409,6 +1399,16 @@ - #reset-cells = <1>; - }; - -+ L2: l2-cache { -+ compatible = "cache", "qcom,krait-cache"; -+ cache-level = <2>; -+ qcom,saw = <&saw_l2>; -+ -+ clocks = <&kraitcc 4>; -+ clock-names = "l2"; -+ operating-points-v2 = <&opp_table_l2>; -+ }; -+ - lpass@28100000 { - compatible = "qcom,lpass-cpu"; - status = "disabled"; diff --git a/target/linux/ipq806x/patches-6.1/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch b/target/linux/ipq806x/patches-6.1/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch deleted file mode 100644 index c9cd3ebdf7..0000000000 --- a/target/linux/ipq806x/patches-6.1/115-01-devfreq-add-ipq806x-fabric-scaling-driver.patch +++ /dev/null @@ -1,203 +0,0 @@ -From 13f075999935bb696dbab63243923179f06fa05e Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 16 Jun 2022 19:56:08 +0200 -Subject: [PATCH 3/4] devfreq: add ipq806x fabric scaling driver - -Add ipq806x fabric scaling driver using the devfreq passive governor. - -Signed-off-by: Christian Marangi ---- - drivers/devfreq/Kconfig | 11 ++ - drivers/devfreq/Makefile | 1 + - drivers/devfreq/ipq806x-fab-devfreq.c | 155 ++++++++++++++++++++++++++ - 3 files changed, 167 insertions(+) - create mode 100644 drivers/devfreq/ipq806x-fab-devfreq.c - ---- a/drivers/devfreq/Kconfig -+++ b/drivers/devfreq/Kconfig -@@ -162,6 +162,17 @@ config ARM_KRAIT_CACHE_DEVFREQ - based on the max frequency across all core and the range set in the device - dts. If provided this scale also the regulator attached to the l2 cache. - -+config ARM_IPQ806X_FAB_DEVFREQ -+ tristate "Scaling support for ipq806x Soc Fabric" -+ depends on ARCH_QCOM || COMPILE_TEST -+ select DEVFREQ_GOV_PASSIVE -+ help -+ This adds the DEVFREQ driver for the ipq806x Soc Fabric. -+ -+ The driver register with the cpufreq notifier and find the right frequency -+ based on the max frequency across all core and the range set in the device -+ dts. -+ - source "drivers/devfreq/event/Kconfig" - - endif # PM_DEVFREQ ---- a/drivers/devfreq/Makefile -+++ b/drivers/devfreq/Makefile -@@ -16,6 +16,7 @@ obj-$(CONFIG_ARM_RK3399_DMC_DEVFREQ) += - obj-$(CONFIG_ARM_SUN8I_A33_MBUS_DEVFREQ) += sun8i-a33-mbus.o - obj-$(CONFIG_ARM_TEGRA_DEVFREQ) += tegra30-devfreq.o - obj-$(CONFIG_ARM_KRAIT_CACHE_DEVFREQ) += krait-cache-devfreq.o -+obj-$(CONFIG_ARM_IPQ806X_FAB_DEVFREQ) += ipq806x-fab-devfreq.o - - # DEVFREQ Event Drivers - obj-$(CONFIG_PM_DEVFREQ_EVENT) += event/ ---- /dev/null -+++ b/drivers/devfreq/ipq806x-fab-devfreq.c -@@ -0,0 +1,155 @@ -+// SPDX-License-Identifier: GPL-2.0 -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include "governor.h" -+ -+struct ipq806x_fab_data { -+ struct clk *fab_clk; -+ struct clk *ddr_clk; -+}; -+ -+static int ipq806x_fab_get_cur_freq(struct device *dev, unsigned long *freq) -+{ -+ struct ipq806x_fab_data *data = dev_get_drvdata(dev); -+ -+ *freq = clk_get_rate(data->fab_clk); -+ -+ return 0; -+}; -+ -+static int ipq806x_fab_target(struct device *dev, unsigned long *freq, -+ u32 flags) -+{ -+ struct ipq806x_fab_data *data = dev_get_drvdata(dev); -+ struct dev_pm_opp *opp; -+ int ret; -+ -+ opp = dev_pm_opp_find_freq_ceil(dev, freq); -+ if (unlikely(IS_ERR(opp))) -+ return PTR_ERR(opp); -+ -+ dev_pm_opp_put(opp); -+ -+ ret = clk_set_rate(data->fab_clk, *freq); -+ if (ret) -+ return ret; -+ -+ return clk_set_rate(data->ddr_clk, *freq); -+}; -+ -+static int ipq806x_fab_get_dev_status(struct device *dev, -+ struct devfreq_dev_status *stat) -+{ -+ struct ipq806x_fab_data *data = dev_get_drvdata(dev); -+ -+ stat->busy_time = 0; -+ stat->total_time = 0; -+ stat->current_frequency = clk_get_rate(data->fab_clk); -+ -+ return 0; -+}; -+ -+static struct devfreq_dev_profile ipq806x_fab_devfreq_profile = { -+ .target = ipq806x_fab_target, -+ .get_dev_status = ipq806x_fab_get_dev_status, -+ .get_cur_freq = ipq806x_fab_get_cur_freq -+}; -+ -+static struct devfreq_passive_data devfreq_gov_data = { -+ .parent_type = CPUFREQ_PARENT_DEV, -+}; -+ -+static int ipq806x_fab_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct ipq806x_fab_data *data; -+ struct devfreq *devfreq; -+ struct clk *clk; -+ int ret; -+ -+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); -+ if (!data) -+ return -ENOMEM; -+ -+ clk = devm_clk_get(dev, "apps-fab-clk"); -+ if (IS_ERR(clk)) { -+ dev_err_probe(dev, PTR_ERR(clk), "failed to get apps fab clk\n"); -+ return PTR_ERR(clk); -+ } -+ -+ clk_prepare_enable(clk); -+ data->fab_clk = clk; -+ -+ clk = devm_clk_get(dev, "ddr-fab-clk"); -+ if (IS_ERR(clk)) { -+ dev_err_probe(dev, PTR_ERR(clk), "failed to get ddr fab clk\n"); -+ goto err_ddr; -+ } -+ -+ clk_prepare_enable(clk); -+ data->ddr_clk = clk; -+ -+ ret = dev_pm_opp_of_add_table(dev); -+ if (ret) { -+ dev_err(dev, "failed to parse fab freq thresholds\n"); -+ return ret; -+ } -+ -+ dev_set_drvdata(dev, data); -+ -+ devfreq = devm_devfreq_add_device(&pdev->dev, &ipq806x_fab_devfreq_profile, -+ DEVFREQ_GOV_PASSIVE, &devfreq_gov_data); -+ if (IS_ERR(devfreq)) -+ dev_pm_opp_remove_table(dev); -+ -+ return PTR_ERR_OR_ZERO(devfreq); -+ -+err_ddr: -+ clk_unprepare(data->fab_clk); -+ clk_put(data->fab_clk); -+ return PTR_ERR(clk); -+}; -+ -+static int ipq806x_fab_remove(struct platform_device *pdev) -+{ -+ struct ipq806x_fab_data *data = dev_get_drvdata(&pdev->dev); -+ -+ clk_unprepare(data->fab_clk); -+ clk_put(data->fab_clk); -+ -+ clk_unprepare(data->ddr_clk); -+ clk_put(data->ddr_clk); -+ -+ dev_pm_opp_remove_table(&pdev->dev); -+ -+ return 0; -+}; -+ -+static const struct of_device_id ipq806x_fab_match_table[] = { -+ { .compatible = "qcom,fab-scaling" }, -+ {} -+}; -+ -+static struct platform_driver ipq806x_fab_driver = { -+ .probe = ipq806x_fab_probe, -+ .remove = ipq806x_fab_remove, -+ .driver = { -+ .name = "ipq806x-fab-scaling", -+ .of_match_table = ipq806x_fab_match_table, -+ }, -+}; -+module_platform_driver(ipq806x_fab_driver); -+ -+MODULE_DESCRIPTION("ipq806x Fab Scaling driver"); -+MODULE_AUTHOR("Christian Marangi "); -+MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq806x/patches-6.1/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch b/target/linux/ipq806x/patches-6.1/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch deleted file mode 100644 index 24e0ecf619..0000000000 --- a/target/linux/ipq806x/patches-6.1/115-02-ARM-dts-qcom-add-fab-scaling-node-for-ipq806x.patch +++ /dev/null @@ -1,48 +0,0 @@ -From c3573f0907dadb0a6e9933aae2a46a489abcbd48 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 16 Jun 2022 20:03:05 +0200 -Subject: [PATCH 4/4] ARM: dts: qcom: add fab scaling node for ipq806x - -Add fabric scaling node for ipq806x to correctly scale apps and ddr -fabric clk. - -Signed-off-by: Christian Marangi ---- - arch/arm/boot/dts/qcom-ipq8064.dtsi | 19 +++++++++++++++++++ - 1 file changed, 19 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -170,6 +170,18 @@ - }; - }; - -+ opp_table_fab: opp_table_fab { -+ compatible = "operating-points-v2"; -+ -+ opp-533000000 { -+ opp-hz = /bits/ 64 <533000000>; -+ }; -+ -+ opp-400000000 { -+ opp-hz = /bits/ 64 <400000000>; -+ }; -+ }; -+ - thermal-zones { - sensor0-thermal { - polling-delay-passive = <0>; -@@ -1409,6 +1421,13 @@ - operating-points-v2 = <&opp_table_l2>; - }; - -+ fab-scaling { -+ compatible = "qcom,fab-scaling"; -+ clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>; -+ clock-names = "apps-fab-clk", "ddr-fab-clk"; -+ operating-points-v2 = <&opp_table_fab>; -+ }; -+ - lpass@28100000 { - compatible = "qcom,lpass-cpu"; - status = "disabled"; diff --git a/target/linux/ipq806x/patches-6.1/122-01-clk-qcom-krait-cc-handle-qsb-clock-defined-in-DTS.patch b/target/linux/ipq806x/patches-6.1/122-01-clk-qcom-krait-cc-handle-qsb-clock-defined-in-DTS.patch deleted file mode 100644 index c30c245d0a..0000000000 --- a/target/linux/ipq806x/patches-6.1/122-01-clk-qcom-krait-cc-handle-qsb-clock-defined-in-DTS.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 666c1b745e93ccddde841d5057c33f97b29a316a Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 15 Sep 2022 02:19:28 +0200 -Subject: [PATCH 3/9] clk: qcom: krait-cc: handle qsb clock defined in DTS - -qsb fixed clk may be defined in DTS and correctly passed in the clocks -list. Add related code to handle this and modify the logic to -dynamically read qsb clock frequency. - -Signed-off-by: Christian Marangi ---- - drivers/clk/qcom/krait-cc.c | 14 +++++++++++--- - 1 file changed, 11 insertions(+), 3 deletions(-) - ---- a/drivers/clk/qcom/krait-cc.c -+++ b/drivers/clk/qcom/krait-cc.c -@@ -348,7 +348,7 @@ static int krait_cc_probe(struct platfor - { - struct device *dev = &pdev->dev; - const struct of_device_id *id; -- unsigned long cur_rate, aux_rate; -+ unsigned long cur_rate, aux_rate, qsb_rate; - int cpu; - struct clk_hw *mux, *l2_pri_mux; - struct clk *clk, **clks; -@@ -357,11 +357,19 @@ static int krait_cc_probe(struct platfor - if (!id) - return -ENODEV; - -- /* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */ -- clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1); -+ /* -+ * Per Documentation qsb should be provided from DTS. -+ * To address old implementation, register the fixed clock anyway. -+ * Rate is 1 because 0 causes problems for __clk_mux_determine_rate -+ */ -+ clk = clk_get(dev, "qsb"); -+ if (IS_ERR(clk)) -+ clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1); - if (IS_ERR(clk)) - return PTR_ERR(clk); - -+ qsb_rate = clk_get_rate(clk); -+ - if (!id->data) { - clk = clk_register_fixed_factor(dev, "acpu_aux", - "gpll0_vote", 0, 1, 2); diff --git a/target/linux/ipq806x/patches-6.1/122-02-clk-qcom-krait-cc-register-REAL-qsb-fixed-clock.patch b/target/linux/ipq806x/patches-6.1/122-02-clk-qcom-krait-cc-register-REAL-qsb-fixed-clock.patch deleted file mode 100644 index e2f78f79fb..0000000000 --- a/target/linux/ipq806x/patches-6.1/122-02-clk-qcom-krait-cc-register-REAL-qsb-fixed-clock.patch +++ /dev/null @@ -1,36 +0,0 @@ -From fca6f185a9d9ef0892a719bc6da955b22d326ec7 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 15 Sep 2022 02:24:33 +0200 -Subject: [PATCH 4/9] clk: qcom: krait-cc: register REAL qsb fixed clock - -With some tools it was discovered the real frequency of the qsb fixed -clock. While not 100% correct it's still better than using 1 as a dummy -frequency. -Correctly register the qsb fixed clock with the frequency of 225 MHz -instead of 1. - -Signed-off-by: Christian Marangi ---- - drivers/clk/qcom/krait-cc.c | 8 +++++--- - 1 file changed, 5 insertions(+), 3 deletions(-) - ---- a/drivers/clk/qcom/krait-cc.c -+++ b/drivers/clk/qcom/krait-cc.c -@@ -25,6 +25,8 @@ enum { - clks_max, - }; - -+#define QSB_RATE 2250000000 -+ - static unsigned int sec_mux_map[] = { - 2, - 0, -@@ -364,7 +366,7 @@ static int krait_cc_probe(struct platfor - */ - clk = clk_get(dev, "qsb"); - if (IS_ERR(clk)) -- clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1); -+ clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, QSB_RATE); - if (IS_ERR(clk)) - return PTR_ERR(clk); - diff --git a/target/linux/ipq806x/patches-6.1/122-03-clk-qcom-krait-cc-drop-pr_info-and-use-dev_info.patch b/target/linux/ipq806x/patches-6.1/122-03-clk-qcom-krait-cc-drop-pr_info-and-use-dev_info.patch deleted file mode 100644 index d95a63fc44..0000000000 --- a/target/linux/ipq806x/patches-6.1/122-03-clk-qcom-krait-cc-drop-pr_info-and-use-dev_info.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 2399d181557d94ae9a2686926cd25768f132e4b4 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Fri, 18 Mar 2022 16:12:14 +0100 -Subject: [PATCH 7/9] clk: qcom: krait-cc: drop pr_info and use dev_info - -Replace pr_info() with dev_info() to provide better diagnostics. - -Signed-off-by: Christian Marangi ---- - drivers/clk/qcom/krait-cc.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/drivers/clk/qcom/krait-cc.c -+++ b/drivers/clk/qcom/krait-cc.c -@@ -423,25 +423,25 @@ static int krait_cc_probe(struct platfor - cur_rate = clk_get_rate(clks[l2_mux]); - aux_rate = 384000000; - if (cur_rate < aux_rate) { -- pr_info("L2 @ Undefined rate. Forcing new rate.\n"); -+ dev_info(dev, "L2 @ Undefined rate. Forcing new rate.\n"); - cur_rate = aux_rate; - } - clk_set_rate(clks[l2_mux], aux_rate); - clk_set_rate(clks[l2_mux], 2); - clk_set_rate(clks[l2_mux], cur_rate); -- pr_info("L2 @ %lu KHz\n", clk_get_rate(clks[l2_mux]) / 1000); -+ dev_info(dev, "L2 @ %lu KHz\n", clk_get_rate(clks[l2_mux]) / 1000); - for_each_possible_cpu(cpu) { - clk = clks[cpu]; - cur_rate = clk_get_rate(clk); - if (cur_rate < aux_rate) { -- pr_info("CPU%d @ Undefined rate. Forcing new rate.\n", cpu); -+ dev_info(dev, "CPU%d @ Undefined rate. Forcing new rate.\n", cpu); - cur_rate = aux_rate; - } - - clk_set_rate(clk, aux_rate); - clk_set_rate(clk, 2); - clk_set_rate(clk, cur_rate); -- pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000); -+ dev_info(dev, "CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000); - } - - of_clk_add_provider(dev->of_node, krait_of_get, clks); diff --git a/target/linux/ipq806x/patches-6.1/122-04-clk-qcom-krait-cc-rework-mux-reset-logic-and-reset-h.patch b/target/linux/ipq806x/patches-6.1/122-04-clk-qcom-krait-cc-rework-mux-reset-logic-and-reset-h.patch deleted file mode 100644 index 8f88e06991..0000000000 --- a/target/linux/ipq806x/patches-6.1/122-04-clk-qcom-krait-cc-rework-mux-reset-logic-and-reset-h.patch +++ /dev/null @@ -1,88 +0,0 @@ -From 6a77cf3f5f95ec0058e1b4d1ada018748cb0b83b Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Thu, 15 Sep 2022 03:33:13 +0200 -Subject: [PATCH 9/9] clk: qcom: krait-cc: rework mux reset logic and reset - hfpll - -Rework and clean mux reset logic. -Compact it to a for loop to handle both CPU and L2 in one place. -Move hardcoded aux_rate to define and add a new hfpll_rate value to -reset hfpll settings. -Change logic to now reset the hfpll to the lowest value of 600 Mhz and -then restoring the previous frequency. This permits to reset the hfpll if -the primary mux was set to source out of the secondary mux. - -Signed-off-by: Christian Marangi ---- - drivers/clk/qcom/krait-cc.c | 50 +++++++++++++++++-------------------- - 1 file changed, 23 insertions(+), 27 deletions(-) - ---- a/drivers/clk/qcom/krait-cc.c -+++ b/drivers/clk/qcom/krait-cc.c -@@ -25,7 +25,9 @@ enum { - clks_max, - }; - --#define QSB_RATE 2250000000 -+#define QSB_RATE 225000000 -+#define AUX_RATE 384000000 -+#define HFPLL_RATE 600000000 - - static unsigned int sec_mux_map[] = { - 2, -@@ -350,7 +352,7 @@ static int krait_cc_probe(struct platfor - { - struct device *dev = &pdev->dev; - const struct of_device_id *id; -- unsigned long cur_rate, aux_rate, qsb_rate; -+ unsigned long cur_rate, qsb_rate; - int cpu; - struct clk_hw *mux, *l2_pri_mux; - struct clk *clk, **clks; -@@ -420,28 +422,29 @@ static int krait_cc_probe(struct platfor - * two different rates to force a HFPLL reinit under all - * circumstances. - */ -- cur_rate = clk_get_rate(clks[l2_mux]); -- aux_rate = 384000000; -- if (cur_rate < aux_rate) { -- dev_info(dev, "L2 @ Undefined rate. Forcing new rate.\n"); -- cur_rate = aux_rate; -- } -- clk_set_rate(clks[l2_mux], aux_rate); -- clk_set_rate(clks[l2_mux], 2); -- clk_set_rate(clks[l2_mux], cur_rate); -- dev_info(dev, "L2 @ %lu KHz\n", clk_get_rate(clks[l2_mux]) / 1000); -- for_each_possible_cpu(cpu) { -+ for (cpu = 0; cpu < 5; cpu++) { -+ const char *l2_s = "L2"; -+ char cpu_s[5]; -+ - clk = clks[cpu]; -+ if (!clk) -+ continue; -+ -+ if (cpu < 4) -+ snprintf(cpu_s, 5, "CPU%d", cpu); -+ - cur_rate = clk_get_rate(clk); -- if (cur_rate < aux_rate) { -- dev_info(dev, "CPU%d @ Undefined rate. Forcing new rate.\n", cpu); -- cur_rate = aux_rate; -+ if (cur_rate < AUX_RATE) { -+ dev_info(dev, "%s @ Undefined rate. Forcing new rate.\n", -+ cpu < 4 ? cpu_s : l2_s); -+ cur_rate = AUX_RATE; - } - -- clk_set_rate(clk, aux_rate); -- clk_set_rate(clk, 2); -+ clk_set_rate(clk, AUX_RATE); -+ clk_set_rate(clk, HFPLL_RATE); - clk_set_rate(clk, cur_rate); -- dev_info(dev, "CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000); -+ dev_info(dev, "%s @ %lu KHz\n", cpu < 4 ? cpu_s : l2_s, -+ clk_get_rate(clk) / 1000); - } - - of_clk_add_provider(dev->of_node, krait_of_get, clks); diff --git a/target/linux/ipq806x/patches-6.1/122-05-clk-qcom-clk-krait-generilize-div-functions.patch b/target/linux/ipq806x/patches-6.1/122-05-clk-qcom-clk-krait-generilize-div-functions.patch deleted file mode 100644 index a7c0f046c8..0000000000 --- a/target/linux/ipq806x/patches-6.1/122-05-clk-qcom-clk-krait-generilize-div-functions.patch +++ /dev/null @@ -1,156 +0,0 @@ -From 908c361b3c3a139eb3e6a798cb620a6da7514d5c Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Fri, 23 Sep 2022 19:05:39 +0200 -Subject: [PATCH 2/4] clk: qcom: clk-krait: generilize div functions - -Generilize div functions and remove hardcode to a divisor of 2. -This is just a cleanup and permit to make it more clear the settings of -the devisor when used by the krait-cc driver. - -Signed-off-by: Christian Marangi ---- - drivers/clk/qcom/clk-krait.c | 57 ++++++++++++++++++++---------------- - drivers/clk/qcom/clk-krait.h | 11 ++++--- - drivers/clk/qcom/krait-cc.c | 7 +++-- - 3 files changed, 42 insertions(+), 33 deletions(-) - ---- a/drivers/clk/qcom/clk-krait.c -+++ b/drivers/clk/qcom/clk-krait.c -@@ -97,53 +97,58 @@ const struct clk_ops krait_mux_clk_ops = - EXPORT_SYMBOL_GPL(krait_mux_clk_ops); - - /* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */ --static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate, -+static long krait_div_round_rate(struct clk_hw *hw, unsigned long rate, - unsigned long *parent_rate) - { -- *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), rate * 2); -- return DIV_ROUND_UP(*parent_rate, 2); -+ struct krait_div_clk *d = to_krait_div_clk(hw); -+ -+ *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), -+ rate * d->divisor); -+ -+ return DIV_ROUND_UP(*parent_rate, d->divisor); - } - --static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate, -+static int krait_div_set_rate(struct clk_hw *hw, unsigned long rate, - unsigned long parent_rate) - { -- struct krait_div2_clk *d = to_krait_div2_clk(hw); -+ struct krait_div_clk *d = to_krait_div_clk(hw); -+ u8 div_val = krait_div_to_val(d->divisor); - unsigned long flags; -- u32 val; -- u32 mask = BIT(d->width) - 1; -- -- if (d->lpl) -- mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift; -- else -- mask <<= d->shift; -+ u32 regval; - - spin_lock_irqsave(&krait_clock_reg_lock, flags); -- val = krait_get_l2_indirect_reg(d->offset); -- val &= ~mask; -- krait_set_l2_indirect_reg(d->offset, val); -+ regval = krait_get_l2_indirect_reg(d->offset); -+ -+ regval &= ~(d->mask << d->shift); -+ regval |= (div_val & d->mask) << d->shift; -+ -+ if (d->lpl) { -+ regval &= ~(d->mask << (d->shift + LPL_SHIFT)); -+ regval |= (div_val & d->mask) << (d->shift + LPL_SHIFT); -+ } -+ -+ krait_set_l2_indirect_reg(d->offset, regval); - spin_unlock_irqrestore(&krait_clock_reg_lock, flags); - - return 0; - } - - static unsigned long --krait_div2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) -+krait_div_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) - { -- struct krait_div2_clk *d = to_krait_div2_clk(hw); -- u32 mask = BIT(d->width) - 1; -+ struct krait_div_clk *d = to_krait_div_clk(hw); - u32 div; - - div = krait_get_l2_indirect_reg(d->offset); - div >>= d->shift; -- div &= mask; -- div = (div + 1) * 2; -+ div &= d->mask; - -- return DIV_ROUND_UP(parent_rate, div); -+ return DIV_ROUND_UP(parent_rate, krait_val_to_div(div)); - } - --const struct clk_ops krait_div2_clk_ops = { -- .round_rate = krait_div2_round_rate, -- .set_rate = krait_div2_set_rate, -- .recalc_rate = krait_div2_recalc_rate, -+const struct clk_ops krait_div_clk_ops = { -+ .round_rate = krait_div_round_rate, -+ .set_rate = krait_div_set_rate, -+ .recalc_rate = krait_div_recalc_rate, - }; --EXPORT_SYMBOL_GPL(krait_div2_clk_ops); -+EXPORT_SYMBOL_GPL(krait_div_clk_ops); ---- a/drivers/clk/qcom/clk-krait.h -+++ b/drivers/clk/qcom/clk-krait.h -@@ -25,17 +25,20 @@ struct krait_mux_clk { - - extern const struct clk_ops krait_mux_clk_ops; - --struct krait_div2_clk { -+struct krait_div_clk { - u32 offset; -- u8 width; -+ u32 mask; -+ u8 divisor; - u32 shift; - bool lpl; - - struct clk_hw hw; - }; - --#define to_krait_div2_clk(_hw) container_of(_hw, struct krait_div2_clk, hw) -+#define to_krait_div_clk(_hw) container_of(_hw, struct krait_div_clk, hw) -+#define krait_div_to_val(_div) ((_div) / 2) - 1 -+#define krait_val_to_div(_val) ((_val) + 1) * 2 - --extern const struct clk_ops krait_div2_clk_ops; -+extern const struct clk_ops krait_div_clk_ops; - - #endif ---- a/drivers/clk/qcom/krait-cc.c -+++ b/drivers/clk/qcom/krait-cc.c -@@ -86,11 +86,11 @@ static int krait_notifier_register(struc - static struct clk_hw * - krait_add_div(struct device *dev, int id, const char *s, unsigned int offset) - { -- struct krait_div2_clk *div; -+ struct krait_div_clk *div; - static struct clk_parent_data p_data[1]; - struct clk_init_data init = { - .num_parents = ARRAY_SIZE(p_data), -- .ops = &krait_div2_clk_ops, -+ .ops = &krait_div_clk_ops, - .flags = CLK_SET_RATE_PARENT, - }; - struct clk_hw *clk; -@@ -101,7 +101,8 @@ krait_add_div(struct device *dev, int id - if (!div) - return ERR_PTR(-ENOMEM); - -- div->width = 2; -+ div->mask = 0x3; -+ div->divisor = 2; - div->shift = 6; - div->lpl = id >= 0; - div->offset = offset; diff --git a/target/linux/ipq806x/patches-6.1/123-clk-qcom-gcc-ipq806x-remove-cc_register_board-for.patch b/target/linux/ipq806x/patches-6.1/123-clk-qcom-gcc-ipq806x-remove-cc_register_board-for.patch deleted file mode 100644 index 0df29a0787..0000000000 --- a/target/linux/ipq806x/patches-6.1/123-clk-qcom-gcc-ipq806x-remove-cc_register_board-for.patch +++ /dev/null @@ -1,31 +0,0 @@ -From ac84ac819a2e8fd3d87122b452c502a386c54437 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Tue, 5 Jul 2022 18:30:18 +0200 -Subject: [PATCH v2 4/4] clk: qcom: gcc-ipq806x: remove cc_register_board for - pxo and cxo - -Now that these clock are defined as fixed clk in dts, we can drop the -register_board_clk for cxo_board and pxo_board in gcc_ipq806x_probe. - -Signed-off-by: Christian Marangi ---- - drivers/clk/qcom/gcc-ipq806x.c | 8 -------- - 1 file changed, 8 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq806x.c -+++ b/drivers/clk/qcom/gcc-ipq806x.c -@@ -3386,14 +3386,6 @@ static int gcc_ipq806x_probe(struct plat - struct regmap *regmap; - int ret; - -- ret = qcom_cc_register_board_clk(dev, "cxo_board", "cxo", 25000000); -- if (ret) -- return ret; -- -- ret = qcom_cc_register_board_clk(dev, "pxo_board", "pxo", 25000000); -- if (ret) -- return ret; -- - if (of_machine_is_compatible("qcom,ipq8065")) { - ubi32_core1_src_clk.freq_tbl = clk_tbl_nss_ipq8065; - ubi32_core2_src_clk.freq_tbl = clk_tbl_nss_ipq8065; diff --git a/target/linux/ipq806x/patches-6.1/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq806x/patches-6.1/850-soc-add-qualcomm-syscon.patch deleted file mode 100644 index 397c4481ab..0000000000 --- a/target/linux/ipq806x/patches-6.1/850-soc-add-qualcomm-syscon.patch +++ /dev/null @@ -1,121 +0,0 @@ -From: Christian Lamparter -Subject: SoC: add qualcomm syscon ---- a/drivers/soc/qcom/Makefile -+++ b/drivers/soc/qcom/Makefile -@@ -23,6 +23,7 @@ obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o - obj-$(CONFIG_QCOM_SPM) += spm.o - obj-$(CONFIG_QCOM_STATS) += qcom_stats.o - obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o -+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o - obj-$(CONFIG_QCOM_APR) += apr.o - obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o - obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o ---- a/drivers/soc/qcom/Kconfig -+++ b/drivers/soc/qcom/Kconfig -@@ -213,6 +213,13 @@ config QCOM_STATS - various SoC level low power modes statistics and export to debugfs - interface. - -+config QCOM_TCSR -+ tristate "QCOM Top Control and Status Registers" -+ depends on ARCH_QCOM -+ help -+ Say y here to enable TCSR support. The TCSR provides control -+ functions for various peripherals. -+ - config QCOM_WCNSS_CTRL - tristate "Qualcomm WCNSS control driver" - depends on ARCH_QCOM || COMPILE_TEST ---- /dev/null -+++ b/drivers/soc/qcom/qcom_tcsr.c -@@ -0,0 +1,64 @@ -+/* -+ * Copyright (c) 2014, The Linux foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License rev 2 and -+ * only rev 2 as published by the free Software foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define TCSR_USB_PORT_SEL 0xb0 -+ -+static int tcsr_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ const struct device_node *node = pdev->dev.of_node; -+ void __iomem *base; -+ u32 val; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) { -+ dev_err(&pdev->dev, "setting usb port select = %d\n", val); -+ writel(val, base + TCSR_USB_PORT_SEL); -+ } -+ -+ return 0; -+} -+ -+static const struct of_device_id tcsr_dt_match[] = { -+ { .compatible = "qcom,tcsr", }, -+ { }, -+}; -+ -+MODULE_DEVICE_TABLE(of, tcsr_dt_match); -+ -+static struct platform_driver tcsr_driver = { -+ .driver = { -+ .name = "tcsr", -+ .owner = THIS_MODULE, -+ .of_match_table = tcsr_dt_match, -+ }, -+ .probe = tcsr_probe, -+}; -+ -+module_platform_driver(tcsr_driver); -+ -+MODULE_AUTHOR("Andy Gross "); -+MODULE_DESCRIPTION("QCOM TCSR driver"); -+MODULE_LICENSE("GPL v2"); ---- /dev/null -+++ b/include/dt-bindings/soc/qcom,tcsr.h -@@ -0,0 +1,23 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+#ifndef __DT_BINDINGS_QCOM_TCSR_H -+#define __DT_BINDINGS_QCOM_TCSR_H -+ -+#define TCSR_USB_SELECT_USB3_P0 0x1 -+#define TCSR_USB_SELECT_USB3_P1 0x2 -+#define TCSR_USB_SELECT_USB3_DUAL 0x3 -+ -+/* TCSR A/B REG */ -+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0 -+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1 -+ -+#endif diff --git a/target/linux/ipq806x/patches-6.1/900-arm-add-cmdline-override.patch b/target/linux/ipq806x/patches-6.1/900-arm-add-cmdline-override.patch deleted file mode 100644 index c9583549d0..0000000000 --- a/target/linux/ipq806x/patches-6.1/900-arm-add-cmdline-override.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -1589,6 +1589,14 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN - - endchoice - -+config CMDLINE_OVERRIDE -+ bool "Use alternative cmdline from device tree" -+ help -+ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can -+ be used, this is not a good option for kernels that are shared across -+ devices. This setting enables using "chosen/cmdline-override" as the -+ cmdline if it exists in the device tree. -+ - config CMDLINE - string "Default kernel command string" - default "" ---- a/drivers/of/fdt.c -+++ b/drivers/of/fdt.c -@@ -1187,6 +1187,17 @@ int __init early_init_dt_scan_chosen(cha - if (p != NULL && l > 0) - strlcat(cmdline, p, min_t(int, strlen(cmdline) + (int)l, COMMAND_LINE_SIZE)); - -+ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different -+ * device tree option of chosen/bootargs-override. This is -+ * helpful on boards where u-boot sets bootargs, and is unable -+ * to be modified. -+ */ -+#ifdef CONFIG_CMDLINE_OVERRIDE -+ p = of_get_flat_dt_prop(node, "bootargs-override", &l); -+ if (p != NULL && l > 0) -+ strlcpy(cmdline, p, min((int)l, COMMAND_LINE_SIZE)); -+#endif -+ - handle_cmdline: - /* - * CONFIG_CMDLINE is meant to be a default in case nothing else diff --git a/target/linux/ipq806x/patches-6.1/901-01-ARM-decompressor-support-memory-start-validation-.patch b/target/linux/ipq806x/patches-6.1/901-01-ARM-decompressor-support-memory-start-validation-.patch deleted file mode 100644 index 04e2a0c57e..0000000000 --- a/target/linux/ipq806x/patches-6.1/901-01-ARM-decompressor-support-memory-start-validation-.patch +++ /dev/null @@ -1,75 +0,0 @@ -From 2f86b9b71a11f86e3d850214ab781ebb17d7260e Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Fri, 19 Jan 2024 19:48:30 +0100 -Subject: [PATCH v2 1/2] ARM: decompressor: support memory start validation for - appended DTB - -There is currently a problem with a very specific sets of kernel config -and AUTO_ZRELADDR. - -For the most common case AUTO_ZRELADDR check the PC register and -calculate the start of the physical memory. Then fdt_check_mem_start is -called to make sure the detected value makes sense by comparing it with -what is present in DTB in the memory nodes and if additional fixup are -required with the use of linux,usable-memory-range in the chosen node to -hardcode usable memory range in case some reserved space needs to be -addressed. With the help of this function the right address is -calculated and the kernel correctly decompress and loads. - -Things starts to become problematic when in the mix, -CONFIG_ARM_APPENDED_DTB is used. This is a particular kernel config is -used when legacy systems doesn't support passing a DTB directly and a -DTB is appended at the end of the image. - -In such case, fdt_check_mem_start is skipped in AUTO_ZRELADDR iteration -as the appended DTB can be augumented later with ATAGS passed from the -bootloader (if CONFIG_ARM_ATAG_DTB_COMPAT is enabled). - -The main problem and what this patch address is the fact that -fdt_check_mem_start is never called later when the appended DTB is -augumented, hence any fixup and validation is not done making AUTO_ZRELADDR -detection inconsistent and most of the time wrong. - -Add support in head.S for this by checking if AUTO_ZRELADDR is enabled -and calling fdt_check_mem_start with the appended DTB and the augumented -values permitting legacy device to provide info in DTB instead of -disabling AUTO_ZRELADDR and hardcoding the physical address offsets. - -Signed-off-by: Christian Marangi -Reviewed-by: Geert Uytterhoeven -Reviewed-by: Linus Walleij ---- - arch/arm/boot/compressed/head.S | 22 ++++++++++++++++++++++ - 1 file changed, 22 insertions(+) - ---- a/arch/arm/boot/compressed/head.S -+++ b/arch/arm/boot/compressed/head.S -@@ -443,6 +443,28 @@ restart: adr r0, LC1 - add r6, r6, r5 - add r10, r10, r5 - add sp, sp, r5 -+ -+#ifdef CONFIG_AUTO_ZRELADDR -+ /* -+ * Validate calculated start of physical memory with appended DTB. -+ * In the first iteration for physical memory start calculation, -+ * we skipped validating it as it could have been augumented by -+ * ATAGS stored at an offset from the same start of physical memory. -+ * -+ * We now have parsed them and augumented the appended DTB if asked -+ * so we can finally validate the start of physical memory. -+ * -+ * This is needed to apply additional fixup with -+ * linux,usable-memory-range or to make sure AUTO_ZRELADDR detected -+ * the correct value. -+ */ -+ sub r0, r4, #TEXT_OFFSET @ revert to base address -+ mov r1, r8 @ use appended DTB -+ bl fdt_check_mem_start -+ -+ /* Determine final kernel image address. */ -+ add r4, r0, #TEXT_OFFSET -+#endif - dtb_check_done: - #endif - diff --git a/target/linux/ipq806x/patches-6.1/901-02-ARM-decompressor-add-option-to-ignore-MEM-ATAGs.patch b/target/linux/ipq806x/patches-6.1/901-02-ARM-decompressor-add-option-to-ignore-MEM-ATAGs.patch deleted file mode 100644 index 2e4c4de545..0000000000 --- a/target/linux/ipq806x/patches-6.1/901-02-ARM-decompressor-add-option-to-ignore-MEM-ATAGs.patch +++ /dev/null @@ -1,54 +0,0 @@ -From 781d7cd4c3364e9d38fa12a342c5ad4c7e33a5ba Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Fri, 19 Jan 2024 20:33:10 +0100 -Subject: [PATCH v2 2/2] ARM: decompressor: add option to ignore MEM ATAGs - -Some bootloaders can pass broken MEM ATAGs that provide hardcoded -information about mounted RAM size and physical location. -Example booloader provide RAM of size 1.7Gb but actual mounted RAM -size is 512Mb causing kernel panic. - -Add option CONFIG_ARM_ATAG_DTB_COMPAT_IGNORE_MEM to ignore these ATAG -and not augument appended DTB memory node. - -Signed-off-by: Christian Marangi -Acked-by: Linus Walleij ---- - arch/arm/Kconfig | 12 ++++++++++++ - arch/arm/boot/compressed/atags_to_fdt.c | 4 ++++ - 2 files changed, 16 insertions(+) - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -1570,6 +1570,18 @@ config ARM_ATAG_DTB_COMPAT - bootloaders, this option allows zImage to extract the information - from the ATAG list and store it at run time into the appended DTB. - -+config ARM_ATAG_DTB_COMPAT_IGNORE_MEM -+ bool "Ignore MEM ATAG information from bootloader" -+ depends on ARM_ATAG_DTB_COMPAT -+ help -+ Some bootloaders can pass broken MEM ATAGs that provide hardcoded -+ information about mounted RAM size and physical location. -+ Example booloader provide RAM of size 1.7Gb but actual mounted RAM -+ size is 512Mb causing kernel panic. -+ -+ Enable this option if MEM ATAGs should be ignored and the memory -+ node in the appended DTB should NOT be augumented. -+ - choice - prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT - default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER ---- a/arch/arm/boot/compressed/atags_to_fdt.c -+++ b/arch/arm/boot/compressed/atags_to_fdt.c -@@ -169,6 +169,10 @@ int atags_to_fdt(void *atag_list, void * - setprop_string(fdt, "/chosen", "bootargs", - atag->u.cmdline.cmdline); - } else if (atag->hdr.tag == ATAG_MEM) { -+ /* Bootloader MEM ATAG are broken and should be ignored */ -+ if (IS_ENABLED(CONFIG_ARM_ATAG_DTB_COMPAT_IGNORE_MEM)) -+ continue; -+ - if (memcount >= sizeof(mem_reg_property)/4) - continue; - if (!atag->u.mem.size) diff --git a/target/linux/ipq806x/patches-6.1/902-ARM-decompressor-support-for-ATAGs-rootblock-parsing.patch b/target/linux/ipq806x/patches-6.1/902-ARM-decompressor-support-for-ATAGs-rootblock-parsing.patch deleted file mode 100644 index 604ac731a8..0000000000 --- a/target/linux/ipq806x/patches-6.1/902-ARM-decompressor-support-for-ATAGs-rootblock-parsing.patch +++ /dev/null @@ -1,197 +0,0 @@ -From 13bb6d8dd9138927950a520a288401db82871dc9 Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Sun, 21 Jan 2024 23:36:57 +0100 -Subject: [PATCH] ARM: decompressor: support for ATAGs rootblock parsing - -The command-line arguments provided by the boot loader will be -appended to a new device tree property: bootloader-args. - -If there is a property "append-rootblock" in DT under /chosen -and a root= option in bootloaders command line it will be parsed -and added to DT bootargs with the form: XX. - -This is usefull in dual boot systems, to get the current root partition -without afecting the rest of the system. - -Signed-off-by: Adrian Panella -[ reworked to a cleaner patch ] -Signed-off-by: Christian Marangi ---- - arch/arm/Kconfig | 10 +++ - arch/arm/boot/compressed/atags_to_fdt.c | 102 ++++++++++++++++++++++-- - init/main.c | 12 +++ - 3 files changed, 117 insertions(+), 7 deletions(-) - ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -1599,6 +1599,16 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN - The command-line arguments provided by the boot loader will be - appended to the the device tree bootargs property. - -+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE -+ bool "Append rootblock parsing bootloader's kernel arguments" -+ help -+ The command-line arguments provided by the boot loader will be -+ appended to a new device tree property: bootloader-args. -+ -+ If there is a property "append-rootblock" in DT under /chosen -+ and a root= option in bootloaders command line it will be parsed -+ and added to DT bootargs with the form: XX. -+ - endchoice - - config CMDLINE_OVERRIDE ---- a/arch/arm/boot/compressed/atags_to_fdt.c -+++ b/arch/arm/boot/compressed/atags_to_fdt.c -@@ -3,7 +3,8 @@ - #include - #include - --#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) -+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) || \ -+ defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) - #define do_extend_cmdline 1 - #else - #define do_extend_cmdline 0 -@@ -69,6 +70,83 @@ static uint32_t get_cell_size(const void - return cell_size; - } - -+/** -+ * taken from arch/x86/boot/string.c -+ * local_strstr - Find the first substring in a %NUL terminated string -+ * @s1: The string to be searched -+ * @s2: The string to search for -+ */ -+static char *local_strstr(const char *s1, const char *s2) -+{ -+ size_t l1, l2; -+ -+ l2 = strlen(s2); -+ if (!l2) -+ return (char *)s1; -+ l1 = strlen(s1); -+ while (l1 >= l2) { -+ l1--; -+ if (!memcmp(s1, s2, l2)) -+ return (char *)s1; -+ s1++; -+ } -+ return NULL; -+} -+ -+static char *append_rootblock(char *dest, const char *str, int len, void *fdt) -+{ -+ char *ptr, *end, *tmp; -+ const char *root="root="; -+ const char *find_rootblock; -+ int i, l; -+ const char *rootblock; -+ -+ find_rootblock = getprop(fdt, "/chosen", "find-rootblock", &l); -+ if (!find_rootblock) -+ find_rootblock = root; -+ -+ /* ARM doesn't have __HAVE_ARCH_STRSTR, so it was copied from x86 */ -+ ptr = local_strstr(str, find_rootblock); -+ if (!ptr) -+ return dest; -+ -+ end = strchr(ptr, ' '); -+ end = end ? (end - 1) : (strchr(ptr, 0) - 1); -+ -+ /* Some boards ubi.mtd=XX,ZZZZ, so let's check for '," too. */ -+ tmp = strchr(ptr, ','); -+ if (tmp) -+ end = end < tmp ? end : tmp - 1; -+ -+ /* -+ * find partition number -+ * (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX | ubi.mtd=XX,ZZZZ ) -+ */ -+ for (i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++); -+ -+ ptr = end + 1; -+ -+ /* if append-rootblock property is set use it to append to command line */ -+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l); -+ if (rootblock != NULL) { -+ if (*dest != ' ') { -+ *dest = ' '; -+ dest++; -+ len++; -+ } -+ -+ if (len + l + i <= COMMAND_LINE_SIZE) { -+ memcpy(dest, rootblock, l); -+ dest += l - 1; -+ -+ memcpy(dest, ptr, i); -+ dest += i; -+ } -+ } -+ -+ return dest; -+} -+ - static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) - { - char cmdline[COMMAND_LINE_SIZE]; -@@ -86,13 +164,23 @@ static void merge_fdt_bootargs(void *fdt - ptr += len - 1; - } - -- /* and append the ATAG_CMDLINE */ - if (fdt_cmdline) { -- len = strlen(fdt_cmdline); -- if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { -- *ptr++ = ' '; -- memcpy(ptr, fdt_cmdline, len); -- ptr += len; -+ if (IS_ENABLED(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)) { -+ /* -+ * save original bootloader args -+ * and append ubi.mtd with root partition number -+ * to current cmdline -+ */ -+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline); -+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt); -+ } else { -+ /* and append the ATAG_CMDLINE */ -+ len = strlen(fdt_cmdline); -+ if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { -+ *ptr++ = ' '; -+ memcpy(ptr, fdt_cmdline, len); -+ ptr += len; -+ } - } - } - *ptr = '\0'; ---- a/init/main.c -+++ b/init/main.c -@@ -28,6 +28,7 @@ - #include - #include - #include -+#include - #include - #include - #include -@@ -996,6 +997,17 @@ asmlinkage __visible void __init __no_sa - pr_notice("Kernel command line: %s\n", saved_command_line); - /* parameters may set static keys */ - jump_label_init(); -+ -+ /* Show bootloader's original command line for reference */ -+ if (IS_ENABLED(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) && of_chosen) { -+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL); -+ -+ if(prop) -+ pr_notice("Bootloader command line (ignored): %s\n", prop); -+ else -+ pr_notice("Bootloader command line not present\n"); -+ } -+ - parse_early_param(); - after_dashes = parse_args("Booting kernel", - static_command_line, __start___param,