From: Sebastian Andrzej Siewior Date: Tue, 5 Oct 2010 10:41:01 +0000 (+0200) Subject: mtd: cleanup nand.h X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a0491fc4d4b584ddc23f412e9a57b05d66a21263;p=openwrt%2Fstaging%2Fblogic.git mtd: cleanup nand.h - *var instead of * var - proper multiline comment - func(args) instead of func (args) - 80 lines So from |total: 2 errors, 37 warnings, 654 lines checked we got to one warning. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 023866572fb1..acd0b500f55a 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -27,15 +27,17 @@ struct mtd_info; struct nand_flash_dev; /* Scan and identify a NAND device */ -extern int nand_scan (struct mtd_info *mtd, int max_chips); -/* Separate phases of nand_scan(), allowing board driver to intervene - * and override command or ECC setup according to flash type */ +extern int nand_scan(struct mtd_info *mtd, int max_chips); +/* + * Separate phases of nand_scan(), allowing board driver to intervene + * and override command or ECC setup according to flash type. + */ extern int nand_scan_ident(struct mtd_info *mtd, int max_chips, struct nand_flash_dev *table); extern int nand_scan_tail(struct mtd_info *mtd); /* Free resources held by the NAND device */ -extern void nand_release (struct mtd_info *mtd); +extern void nand_release(struct mtd_info *mtd); /* Internal helper for board drivers which need to override command function */ extern void nand_wait_ready(struct mtd_info *mtd); @@ -49,7 +51,8 @@ extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); /* The maximum number of NAND chips in an array */ #define NAND_MAX_CHIPS 8 -/* This constant declares the max. oobsize / page, which +/* + * This constant declares the max. oobsize / page, which * is supported now. If you add a chip with bigger oobsize/page * adjust this accordingly. */ @@ -153,9 +156,10 @@ typedef enum { #define NAND_GET_DEVICE 0x80 -/* Option constants for bizarre disfunctionality and real -* features -*/ +/* + * Option constants for bizarre disfunctionality and real + * features. + */ /* Chip can not auto increment pages */ #define NAND_NO_AUTOINCR 0x00000001 /* Buswitdh is 16 bit */ @@ -166,19 +170,27 @@ typedef enum { #define NAND_CACHEPRG 0x00000008 /* Chip has copy back function */ #define NAND_COPYBACK 0x00000010 -/* AND Chip which has 4 banks and a confusing page / block - * assignment. See Renesas datasheet for further information */ +/* + * AND Chip which has 4 banks and a confusing page / block + * assignment. See Renesas datasheet for further information. + */ #define NAND_IS_AND 0x00000020 -/* Chip has a array of 4 pages which can be read without - * additional ready /busy waits */ +/* + * Chip has a array of 4 pages which can be read without + * additional ready /busy waits. + */ #define NAND_4PAGE_ARRAY 0x00000040 -/* Chip requires that BBT is periodically rewritten to prevent +/* + * Chip requires that BBT is periodically rewritten to prevent * bits from adjacent blocks from 'leaking' in altering data. - * This happens with the Renesas AG-AND chips, possibly others. */ + * This happens with the Renesas AG-AND chips, possibly others. + */ #define BBT_AUTO_REFRESH 0x00000080 -/* Chip does not require ready check on read. True +/* + * Chip does not require ready check on read. True * for all large page devices, as they do not support - * autoincrement.*/ + * autoincrement. + */ #define NAND_NO_READRDY 0x00000100 /* Chip does not allow subpage writes */ #define NAND_NO_SUBPAGE_WRITE 0x00000200 @@ -213,8 +225,10 @@ typedef enum { #define NAND_USE_FLASH_BBT 0x00010000 /* This option skips the bbt scan during initialization. */ #define NAND_SKIP_BBTSCAN 0x00020000 -/* This option is defined if the board driver allocates its own buffers - (e.g. because it needs them DMA-coherent */ +/* + * This option is defined if the board driver allocates its own buffers + * (e.g. because it needs them DMA-coherent). + */ #define NAND_OWN_BUFFERS 0x00040000 /* Chip may not exist, so silence any errors in scan */ #define NAND_SCAN_SILENT_NODEV 0x00080000 @@ -304,8 +318,9 @@ struct nand_onfi_params { * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independent devices * @lock: protection lock * @active: the mtd device which holds the controller currently - * @wq: wait queue to sleep on if a NAND operation is in progress - * used instead of the per chip wait queue when a hw controller is available + * @wq: wait queue to sleep on if a NAND operation is in + * progress used instead of the per chip wait queue + * when a hw controller is available. */ struct nand_hw_control { spinlock_t lock; @@ -329,9 +344,11 @@ struct nand_hw_control { * @correct: function for ecc correction, matching to ecc generator (sw/hw) * @read_page_raw: function to read a raw page without ECC * @write_page_raw: function to write a raw page without ECC - * @read_page: function to read a page according to the ecc generator requirements + * @read_page: function to read a page according to the ecc generator + * requirements. * @read_subpage: function to read parts of the page covered by ECC. - * @write_page: function to write a page according to the ecc generator requirements + * @write_page: function to write a page according to the ecc generator + * requirements. * @read_oob: function to read chip OOB data * @write_oob: function to write chip OOB data */ @@ -393,13 +410,16 @@ struct nand_buffers { /** * struct nand_chip - NAND Private Flash Chip Data - * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device - * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device + * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the + * flash device + * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the + * flash device. * @read_byte: [REPLACEABLE] read one byte from the chip * @read_word: [REPLACEABLE] read one word from the chip * @write_buf: [REPLACEABLE] write data from the buffer to the chip * @read_buf: [REPLACEABLE] read data from the chip into the buffer - * @verify_buf: [REPLACEABLE] verify buffer contents against the chip data + * @verify_buf: [REPLACEABLE] verify buffer contents against the chip + * data. * @select_chip: [REPLACEABLE] select chip nr * @block_bad: [REPLACEABLE] check, if the block is bad * @block_markbad: [REPLACEABLE] mark the block bad @@ -409,45 +429,60 @@ struct nand_buffers { * mtd->oobsize, mtd->writesize and so on. * @id_data contains the 8 bytes values of NAND_CMD_READID. * Return with the bus width. - * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line - * If set to NULL no access to ready/busy is available and the ready/busy information - * is read from the chip status register - * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip - * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready + * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing + * device ready/busy line. If set to NULL no access to + * ready/busy is available and the ready/busy information + * is read from the chip status register. + * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing + * commands to the chip. + * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on + * ready. * @ecc: [BOARDSPECIFIC] ecc control ctructure * @buffers: buffer structure for read/write * @hwcontrol: platform-specific hardware control structure * @ops: oob operation operands - * @erase_cmd: [INTERN] erase command write function, selectable due to AND support + * @erase_cmd: [INTERN] erase command write function, selectable due + * to AND support. * @scan_bbt: [REPLACEABLE] function to scan bad block table - * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR) + * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering + * data from array to read regs (tR). * @state: [INTERN] the current state of the NAND device * @oob_poi: poison value buffer - * @page_shift: [INTERN] number of address bits in a page (column address bits) + * @page_shift: [INTERN] number of address bits in a page (column + * address bits). * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry * @chip_shift: [INTERN] number of address bits in one chip - * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about - * special functionality. See the defines for further explanation - * @badblockpos: [INTERN] position of the bad block marker in the oob area + * @options: [BOARDSPECIFIC] various chip options. They can partly + * be set to inform nand_scan about special functionality. + * See the defines for further explanation. + * @badblockpos: [INTERN] position of the bad block marker in the oob + * area. * @cellinfo: [INTERN] MLC/multichip data from chip ident * @numchips: [INTERN] number of physical chips * @chipsize: [INTERN] the size of one chip for multichip arrays * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 - * @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf + * @pagebuf: [INTERN] holds the pagenumber which is currently in + * data_buf. * @subpagesize: [INTERN] holds the subpagesize - * @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded), non 0 if ONFI supported - * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is supported, 0 otherwise + * @onfi_version: [INTERN] holds the chip ONFI version (BCD encoded), + * non 0 if ONFI supported. + * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is + * supported, 0 otherwise. * @ecclayout: [REPLACEABLE] the default ecc placement scheme * @bbt: [INTERN] bad block table pointer - * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup + * @bbt_td: [REPLACEABLE] bad block table descriptor for flash + * lookup. * @bbt_md: [REPLACEABLE] bad block table mirror descriptor - * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan - * @controller: [REPLACEABLE] a pointer to a hardware controller structure - * which is shared among multiple independend devices + * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial + * bad block scan. + * @controller: [REPLACEABLE] a pointer to a hardware controller + * structure which is shared among multiple independend + * devices. * @priv: [OPTIONAL] pointer to private chip date - * @errstat: [OPTIONAL] hardware specific function to perform additional error status checks - * (determine if errors are correctable) + * @errstat: [OPTIONAL] hardware specific function to perform + * additional error status checks (determine if errors are + * correctable). * @write_page: [REPLACEABLE] High-level page write function */ @@ -457,24 +492,32 @@ struct nand_chip { uint8_t (*read_byte)(struct mtd_info *mtd); u16 (*read_word)(struct mtd_info *mtd); - void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); - void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); - int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); + void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, + int len); + void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, + int len); + int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, + int len); void (*select_chip)(struct mtd_info *mtd, int chip); - int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); + int (*block_bad)(struct mtd_info *mtd, loff_t ofs, + int getchip); int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl); int (*init_size)(struct mtd_info *mtd, struct nand_chip *this, u8 *id_data); int (*dev_ready)(struct mtd_info *mtd); - void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); - int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this); + void (*cmdfunc)(struct mtd_info *mtd, unsigned command, + int column, int page_addr); + int (*waitfunc)(struct mtd_info *mtd, + struct nand_chip *this); void (*erase_cmd)(struct mtd_info *mtd, int page); int (*scan_bbt)(struct mtd_info *mtd); - int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, int state, int status, int page); - int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int page, int cached, int raw); + int (*errstat)(struct mtd_info *mtd, struct nand_chip *this, + int state, int status, int page); + int (*write_page)(struct mtd_info *mtd, + struct nand_chip *chip, const uint8_t *buf, int page, + int cached, int raw); int chip_delay; unsigned int options; @@ -557,7 +600,7 @@ struct nand_flash_dev { */ struct nand_manufacturers { int id; - char * name; + char *name; }; extern struct nand_flash_dev nand_flash_ids[]; @@ -570,7 +613,7 @@ extern int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt); extern int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, int allowbbt); extern int nand_do_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, uint8_t * buf); + size_t *retlen, uint8_t *buf); /** * struct platform_nand_chip - chip level device structure