From: Daniel Golle Date: Sat, 8 Jul 2023 16:21:27 +0000 (+0100) Subject: mediatek: use backported Ethernet PHY driver also for 5.15 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9fac59009657068d5a58b3d0255d4ca1507dd457;p=openwrt%2Fstaging%2Fansuel.git mediatek: use backported Ethernet PHY driver also for 5.15 Backport in-SoC Gigabit Ethernet PHY driver instead of carrying the driver in files-5.15. Signed-off-by: Daniel Golle --- diff --git a/target/linux/mediatek/files-5.15/drivers/net/phy/mediatek-ge-soc.c b/target/linux/mediatek/files-5.15/drivers/net/phy/mediatek-ge-soc.c deleted file mode 100644 index e48502ac3f..0000000000 --- a/target/linux/mediatek/files-5.15/drivers/net/phy/mediatek-ge-soc.c +++ /dev/null @@ -1,1263 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -#include -#include -#include -#include -#include -#include -#include - -#define MTK_GPHY_ID_MT7981 0x03a29461 -#define MTK_GPHY_ID_MT7988 0x03a29481 - -#define MTK_EXT_PAGE_ACCESS 0x1f -#define MTK_PHY_PAGE_STANDARD 0x0000 -#define MTK_PHY_PAGE_EXTENDED_3 0x0003 - -#define MTK_PHY_LPI_REG_14 0x14 -#define MTK_PHY_LPI_WAKE_TIMER_1000_MASK GENMASK(8, 0) - -#define MTK_PHY_LPI_REG_1c 0x1c -#define MTK_PHY_SMI_DET_ON_THRESH_MASK GENMASK(13, 8) - -#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30 -#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5 - -#define ANALOG_INTERNAL_OPERATION_MAX_US 20 -#define TXRESERVE_MIN 0 -#define TXRESERVE_MAX 7 - -#define MTK_PHY_ANARG_RG 0x10 -#define MTK_PHY_TCLKOFFSET_MASK GENMASK(12, 8) - -/* Registers on MDIO_MMD_VEND1 */ -#define MTK_PHY_TXVLD_DA_RG 0x12 -#define MTK_PHY_DA_TX_I2MPB_A_GBE_MASK GENMASK(15, 10) -#define MTK_PHY_DA_TX_I2MPB_A_TBT_MASK GENMASK(5, 0) - -#define MTK_PHY_TX_I2MPB_TEST_MODE_A2 0x16 -#define MTK_PHY_DA_TX_I2MPB_A_HBT_MASK GENMASK(15, 10) -#define MTK_PHY_DA_TX_I2MPB_A_TST_MASK GENMASK(5, 0) - -#define MTK_PHY_TX_I2MPB_TEST_MODE_B1 0x17 -#define MTK_PHY_DA_TX_I2MPB_B_GBE_MASK GENMASK(13, 8) -#define MTK_PHY_DA_TX_I2MPB_B_TBT_MASK GENMASK(5, 0) - -#define MTK_PHY_TX_I2MPB_TEST_MODE_B2 0x18 -#define MTK_PHY_DA_TX_I2MPB_B_HBT_MASK GENMASK(13, 8) -#define MTK_PHY_DA_TX_I2MPB_B_TST_MASK GENMASK(5, 0) - -#define MTK_PHY_TX_I2MPB_TEST_MODE_C1 0x19 -#define MTK_PHY_DA_TX_I2MPB_C_GBE_MASK GENMASK(13, 8) -#define MTK_PHY_DA_TX_I2MPB_C_TBT_MASK GENMASK(5, 0) - -#define MTK_PHY_TX_I2MPB_TEST_MODE_C2 0x20 -#define MTK_PHY_DA_TX_I2MPB_C_HBT_MASK GENMASK(13, 8) -#define MTK_PHY_DA_TX_I2MPB_C_TST_MASK GENMASK(5, 0) - -#define MTK_PHY_TX_I2MPB_TEST_MODE_D1 0x21 -#define MTK_PHY_DA_TX_I2MPB_D_GBE_MASK GENMASK(13, 8) -#define MTK_PHY_DA_TX_I2MPB_D_TBT_MASK GENMASK(5, 0) - -#define MTK_PHY_TX_I2MPB_TEST_MODE_D2 0x22 -#define MTK_PHY_DA_TX_I2MPB_D_HBT_MASK GENMASK(13, 8) -#define MTK_PHY_DA_TX_I2MPB_D_TST_MASK GENMASK(5, 0) - -#define MTK_PHY_RXADC_CTRL_RG7 0xc6 -#define MTK_PHY_DA_AD_BUF_BIAS_LP_MASK GENMASK(9, 8) - -#define MTK_PHY_RXADC_CTRL_RG9 0xc8 -#define MTK_PHY_DA_RX_PSBN_TBT_MASK GENMASK(14, 12) -#define MTK_PHY_DA_RX_PSBN_HBT_MASK GENMASK(10, 8) -#define MTK_PHY_DA_RX_PSBN_GBE_MASK GENMASK(6, 4) -#define MTK_PHY_DA_RX_PSBN_LP_MASK GENMASK(2, 0) - -#define MTK_PHY_LDO_OUTPUT_V 0xd7 - -#define MTK_PHY_RG_ANA_CAL_RG0 0xdb -#define MTK_PHY_RG_CAL_CKINV BIT(12) -#define MTK_PHY_RG_ANA_CALEN BIT(8) -#define MTK_PHY_RG_ZCALEN_A BIT(0) - -#define MTK_PHY_RG_ANA_CAL_RG1 0xdc -#define MTK_PHY_RG_ZCALEN_B BIT(12) -#define MTK_PHY_RG_ZCALEN_C BIT(8) -#define MTK_PHY_RG_ZCALEN_D BIT(4) -#define MTK_PHY_RG_TXVOS_CALEN BIT(0) - -#define MTK_PHY_RG_ANA_CAL_RG5 0xe0 -#define MTK_PHY_RG_REXT_TRIM_MASK GENMASK(13, 8) - -#define MTK_PHY_RG_TX_FILTER 0xfe - -#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120 0x120 -#define MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK GENMASK(12, 8) -#define MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK GENMASK(4, 0) - -#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122 0x122 -#define MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK GENMASK(7, 0) - -#define MTK_PHY_RG_TESTMUX_ADC_CTRL 0x144 -#define MTK_PHY_RG_TXEN_DIG_MASK GENMASK(5, 5) - -#define MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B 0x172 -#define MTK_PHY_CR_TX_AMP_OFFSET_A_MASK GENMASK(13, 8) -#define MTK_PHY_CR_TX_AMP_OFFSET_B_MASK GENMASK(6, 0) - -#define MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D 0x173 -#define MTK_PHY_CR_TX_AMP_OFFSET_C_MASK GENMASK(13, 8) -#define MTK_PHY_CR_TX_AMP_OFFSET_D_MASK GENMASK(6, 0) - -#define MTK_PHY_RG_AD_CAL_COMP 0x17a -#define MTK_PHY_AD_CAL_COMP_OUT_SHIFT (8) - -#define MTK_PHY_RG_AD_CAL_CLK 0x17b -#define MTK_PHY_DA_CAL_CLK BIT(0) - -#define MTK_PHY_RG_AD_CALIN 0x17c -#define MTK_PHY_DA_CALIN_FLAG BIT(0) - -#define MTK_PHY_RG_DASN_DAC_IN0_A 0x17d -#define MTK_PHY_DASN_DAC_IN0_A_MASK GENMASK(9, 0) - -#define MTK_PHY_RG_DASN_DAC_IN0_B 0x17e -#define MTK_PHY_DASN_DAC_IN0_B_MASK GENMASK(9, 0) - -#define MTK_PHY_RG_DASN_DAC_IN0_C 0x17f -#define MTK_PHY_DASN_DAC_IN0_C_MASK GENMASK(9, 0) - -#define MTK_PHY_RG_DASN_DAC_IN0_D 0x180 -#define MTK_PHY_DASN_DAC_IN0_D_MASK GENMASK(9, 0) - -#define MTK_PHY_RG_DASN_DAC_IN1_A 0x181 -#define MTK_PHY_DASN_DAC_IN1_A_MASK GENMASK(9, 0) - -#define MTK_PHY_RG_DASN_DAC_IN1_B 0x182 -#define MTK_PHY_DASN_DAC_IN1_B_MASK GENMASK(9, 0) - -#define MTK_PHY_RG_DASN_DAC_IN1_C 0x183 -#define MTK_PHY_DASN_DAC_IN1_C_MASK GENMASK(9, 0) - -#define MTK_PHY_RG_DASN_DAC_IN1_D 0x184 -#define MTK_PHY_DASN_DAC_IN1_D_MASK GENMASK(9, 0) - -#define MTK_PHY_RG_DEV1E_REG19b 0x19b -#define MTK_PHY_BYPASS_DSP_LPI_READY BIT(8) - -#define MTK_PHY_RG_LP_IIR2_K1_L 0x22a -#define MTK_PHY_RG_LP_IIR2_K1_U 0x22b -#define MTK_PHY_RG_LP_IIR2_K2_L 0x22c -#define MTK_PHY_RG_LP_IIR2_K2_U 0x22d -#define MTK_PHY_RG_LP_IIR2_K3_L 0x22e -#define MTK_PHY_RG_LP_IIR2_K3_U 0x22f -#define MTK_PHY_RG_LP_IIR2_K4_L 0x230 -#define MTK_PHY_RG_LP_IIR2_K4_U 0x231 -#define MTK_PHY_RG_LP_IIR2_K5_L 0x232 -#define MTK_PHY_RG_LP_IIR2_K5_U 0x233 - -#define MTK_PHY_RG_DEV1E_REG234 0x234 -#define MTK_PHY_TR_OPEN_LOOP_EN_MASK GENMASK(0, 0) -#define MTK_PHY_LPF_X_AVERAGE_MASK GENMASK(7, 4) -#define MTK_PHY_TR_LP_IIR_EEE_EN BIT(12) - -#define MTK_PHY_RG_LPF_CNT_VAL 0x235 - -#define MTK_PHY_RG_DEV1E_REG238 0x238 -#define MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK GENMASK(8, 0) -#define MTK_PHY_LPI_SLV_SEND_TX_EN BIT(12) - -#define MTK_PHY_RG_DEV1E_REG239 0x239 -#define MTK_PHY_LPI_SEND_LOC_TIMER_MASK GENMASK(8, 0) -#define MTK_PHY_LPI_TXPCS_LOC_RCV BIT(12) - -#define MTK_PHY_RG_DEV1E_REG27C 0x27c -#define MTK_PHY_VGASTATE_FFE_THR_ST1_MASK GENMASK(12, 8) -#define MTK_PHY_RG_DEV1E_REG27D 0x27d -#define MTK_PHY_VGASTATE_FFE_THR_ST2_MASK GENMASK(4, 0) - -#define MTK_PHY_RG_DEV1E_REG2C7 0x2c7 -#define MTK_PHY_MAX_GAIN_MASK GENMASK(4, 0) -#define MTK_PHY_MIN_GAIN_MASK GENMASK(12, 8) - -#define MTK_PHY_RG_DEV1E_REG2D1 0x2d1 -#define MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK GENMASK(7, 0) -#define MTK_PHY_LPI_SKIP_SD_SLV_TR BIT(8) -#define MTK_PHY_LPI_TR_READY BIT(9) -#define MTK_PHY_LPI_VCO_EEE_STG0_EN BIT(10) - -#define MTK_PHY_RG_DEV1E_REG323 0x323 -#define MTK_PHY_EEE_WAKE_MAS_INT_DC BIT(0) -#define MTK_PHY_EEE_WAKE_SLV_INT_DC BIT(4) - -#define MTK_PHY_RG_DEV1E_REG324 0x324 -#define MTK_PHY_SMI_DETCNT_MAX_MASK GENMASK(5, 0) -#define MTK_PHY_SMI_DET_MAX_EN BIT(8) - -#define MTK_PHY_RG_DEV1E_REG326 0x326 -#define MTK_PHY_LPI_MODE_SD_ON BIT(0) -#define MTK_PHY_RESET_RANDUPD_CNT BIT(1) -#define MTK_PHY_TREC_UPDATE_ENAB_CLR BIT(2) -#define MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF BIT(4) -#define MTK_PHY_TR_READY_SKIP_AFE_WAKEUP BIT(5) - -#define MTK_PHY_LDO_PUMP_EN_PAIRAB 0x502 -#define MTK_PHY_LDO_PUMP_EN_PAIRCD 0x503 - -#define MTK_PHY_DA_TX_R50_PAIR_A 0x53d -#define MTK_PHY_DA_TX_R50_PAIR_B 0x53e -#define MTK_PHY_DA_TX_R50_PAIR_C 0x53f -#define MTK_PHY_DA_TX_R50_PAIR_D 0x540 - -/* Registers on MDIO_MMD_VEND2 */ -#define MTK_PHY_LED0_ON_CTRL 0x24 -#define MTK_PHY_LED0_ON_MASK GENMASK(6, 0) -#define MTK_PHY_LED0_ON_LINK1000 BIT(0) -#define MTK_PHY_LED0_ON_LINK100 BIT(1) -#define MTK_PHY_LED0_ON_LINK10 BIT(2) -#define MTK_PHY_LED0_ON_LINKDOWN BIT(3) -#define MTK_PHY_LED0_ON_FDX BIT(4) /* Full duplex */ -#define MTK_PHY_LED0_ON_HDX BIT(5) /* Half duplex */ -#define MTK_PHY_LED0_FORCE_ON BIT(6) -#define MTK_PHY_LED0_POLARITY BIT(14) -#define MTK_PHY_LED0_ENABLE BIT(15) - -#define MTK_PHY_LED0_BLINK_CTRL 0x25 -#define MTK_PHY_LED0_1000TX BIT(0) -#define MTK_PHY_LED0_1000RX BIT(1) -#define MTK_PHY_LED0_100TX BIT(2) -#define MTK_PHY_LED0_100RX BIT(3) -#define MTK_PHY_LED0_10TX BIT(4) -#define MTK_PHY_LED0_10RX BIT(5) -#define MTK_PHY_LED0_COLLISION BIT(6) -#define MTK_PHY_LED0_RX_CRC_ERR BIT(7) -#define MTK_PHY_LED0_RX_IDLE_ERR BIT(8) -#define MTK_PHY_LED0_FORCE_BLINK BIT(9) - -#define MTK_PHY_LED1_ON_CTRL 0x26 -#define MTK_PHY_LED1_ON_MASK GENMASK(6, 0) -#define MTK_PHY_LED1_ON_LINK1000 BIT(0) -#define MTK_PHY_LED1_ON_LINK100 BIT(1) -#define MTK_PHY_LED1_ON_LINK10 BIT(2) -#define MTK_PHY_LED1_ON_LINKDOWN BIT(3) -#define MTK_PHY_LED1_ON_FDX BIT(4) /* Full duplex */ -#define MTK_PHY_LED1_ON_HDX BIT(5) /* Half duplex */ -#define MTK_PHY_LED1_FORCE_ON BIT(6) -#define MTK_PHY_LED1_POLARITY BIT(14) -#define MTK_PHY_LED1_ENABLE BIT(15) - -#define MTK_PHY_LED1_BLINK_CTRL 0x27 -#define MTK_PHY_LED1_1000TX BIT(0) -#define MTK_PHY_LED1_1000RX BIT(1) -#define MTK_PHY_LED1_100TX BIT(2) -#define MTK_PHY_LED1_100RX BIT(3) -#define MTK_PHY_LED1_10TX BIT(4) -#define MTK_PHY_LED1_10RX BIT(5) -#define MTK_PHY_LED1_COLLISION BIT(6) -#define MTK_PHY_LED1_RX_CRC_ERR BIT(7) -#define MTK_PHY_LED1_RX_IDLE_ERR BIT(8) -#define MTK_PHY_LED1_FORCE_BLINK BIT(9) - -#define MTK_PHY_RG_BG_RASEL 0x115 -#define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0) - -/* These macro privides efuse parsing for internal phy. */ -#define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0)) -#define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0)) -#define EFS_DA_TX_I2MPB_C(x) (((x) >> 12) & GENMASK(5, 0)) -#define EFS_DA_TX_I2MPB_D(x) (((x) >> 18) & GENMASK(5, 0)) -#define EFS_DA_TX_AMP_OFFSET_A(x) (((x) >> 24) & GENMASK(5, 0)) - -#define EFS_DA_TX_AMP_OFFSET_B(x) (((x) >> 0) & GENMASK(5, 0)) -#define EFS_DA_TX_AMP_OFFSET_C(x) (((x) >> 6) & GENMASK(5, 0)) -#define EFS_DA_TX_AMP_OFFSET_D(x) (((x) >> 12) & GENMASK(5, 0)) -#define EFS_DA_TX_R50_A(x) (((x) >> 18) & GENMASK(5, 0)) -#define EFS_DA_TX_R50_B(x) (((x) >> 24) & GENMASK(5, 0)) - -#define EFS_DA_TX_R50_C(x) (((x) >> 0) & GENMASK(5, 0)) -#define EFS_DA_TX_R50_D(x) (((x) >> 6) & GENMASK(5, 0)) - -#define EFS_RG_BG_RASEL(x) (((x) >> 4) & GENMASK(2, 0)) -#define EFS_RG_REXT_TRIM(x) (((x) >> 7) & GENMASK(5, 0)) - -enum { - NO_PAIR, - PAIR_A, - PAIR_B, - PAIR_C, - PAIR_D, -}; - -enum { - GPHY_PORT0, - GPHY_PORT1, - GPHY_PORT2, - GPHY_PORT3, -}; - -enum calibration_mode { - EFUSE_K, - SW_K -}; - -enum CAL_ITEM { - REXT, - TX_OFFSET, - TX_AMP, - TX_R50, - TX_VCM -}; - -enum CAL_MODE { - EFUSE_M, - SW_M -}; - -struct mtk_socphy_shared_priv { - u32 boottrap; -}; - -static int mtk_socphy_read_page(struct phy_device *phydev) -{ - return __phy_read(phydev, MTK_EXT_PAGE_ACCESS); -} - -static int mtk_socphy_write_page(struct phy_device *phydev, int page) -{ - return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page); -} - -/* One calibration cycle consists of: - * 1.Set DA_CALIN_FLAG high to start calibration. Keep it high - * until AD_CAL_COMP is ready to output calibration result. - * 2.Wait until DA_CAL_CLK is available. - * 3.Fetch AD_CAL_COMP_OUT. - */ -static int cal_cycle(struct phy_device *phydev, int devad, - u32 regnum, u16 mask, u16 cal_val) -{ - int reg_val; - int ret; - - phy_modify_mmd(phydev, devad, regnum, - mask, cal_val); - phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN, - MTK_PHY_DA_CALIN_FLAG); - - ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_AD_CAL_CLK, reg_val, - reg_val & MTK_PHY_DA_CAL_CLK, 500, - ANALOG_INTERNAL_OPERATION_MAX_US, false); - if (ret) { - phydev_err(phydev, "Calibration cycle timeout\n"); - return ret; - } - - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN, - MTK_PHY_DA_CALIN_FLAG); - ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >> - MTK_PHY_AD_CAL_COMP_OUT_SHIFT; - phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret); - - return ret; -} - -static int rext_fill_result(struct phy_device *phydev, u16 *buf) -{ - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5, - MTK_PHY_RG_REXT_TRIM_MASK, buf[0] << 8); - phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_BG_RASEL, - MTK_PHY_RG_BG_RASEL_MASK, buf[1]); - - return 0; -} - -static int rext_cal_efuse(struct phy_device *phydev, u32 *buf) -{ - u16 rext_cal_val[2]; - - rext_cal_val[0] = EFS_RG_REXT_TRIM(buf[3]); - rext_cal_val[1] = EFS_RG_BG_RASEL(buf[3]); - rext_fill_result(phydev, rext_cal_val); - - return 0; -} - -static int tx_offset_fill_result(struct phy_device *phydev, u16 *buf) -{ - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B, - MTK_PHY_CR_TX_AMP_OFFSET_A_MASK, buf[0] << 8); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B, - MTK_PHY_CR_TX_AMP_OFFSET_B_MASK, buf[1]); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D, - MTK_PHY_CR_TX_AMP_OFFSET_C_MASK, buf[2] << 8); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D, - MTK_PHY_CR_TX_AMP_OFFSET_D_MASK, buf[3]); - - return 0; -} - -static int tx_offset_cal_efuse(struct phy_device *phydev, u32 *buf) -{ - u16 tx_offset_cal_val[4]; - - tx_offset_cal_val[0] = EFS_DA_TX_AMP_OFFSET_A(buf[0]); - tx_offset_cal_val[1] = EFS_DA_TX_AMP_OFFSET_B(buf[1]); - tx_offset_cal_val[2] = EFS_DA_TX_AMP_OFFSET_C(buf[1]); - tx_offset_cal_val[3] = EFS_DA_TX_AMP_OFFSET_D(buf[1]); - - tx_offset_fill_result(phydev, tx_offset_cal_val); - - return 0; -} - -static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf) -{ - int i; - int bias[16] = {}; - const int vals_9461[16] = { 7, 1, 4, 7, - 7, 1, 4, 7, - 7, 1, 4, 7, - 7, 1, 4, 7 }; - const int vals_9481[16] = { 10, 6, 6, 10, - 10, 6, 6, 10, - 10, 6, 6, 10, - 10, 6, 6, 10 }; - switch (phydev->drv->phy_id) { - case MTK_GPHY_ID_MT7981: - /* We add some calibration to efuse values - * due to board level influence. - * GBE: +7, TBT: +1, HBT: +4, TST: +7 - */ - memcpy(bias, (const void *)vals_9461, sizeof(bias)); - break; - case MTK_GPHY_ID_MT7988: - memcpy(bias, (const void *)vals_9481, sizeof(bias)); - break; - } - - /* Prevent overflow */ - for (i = 0; i < 12; i++) { - if (buf[i >> 2] + bias[i] > 63) { - buf[i >> 2] = 63; - bias[i] = 0; - } - } - - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG, - MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG, - MTK_PHY_DA_TX_I2MPB_A_TBT_MASK, buf[0] + bias[1]); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2, - MTK_PHY_DA_TX_I2MPB_A_HBT_MASK, (buf[0] + bias[2]) << 10); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2, - MTK_PHY_DA_TX_I2MPB_A_TST_MASK, buf[0] + bias[3]); - - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1, - MTK_PHY_DA_TX_I2MPB_B_GBE_MASK, (buf[1] + bias[4]) << 8); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1, - MTK_PHY_DA_TX_I2MPB_B_TBT_MASK, buf[1] + bias[5]); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2, - MTK_PHY_DA_TX_I2MPB_B_HBT_MASK, (buf[1] + bias[6]) << 8); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2, - MTK_PHY_DA_TX_I2MPB_B_TST_MASK, buf[1] + bias[7]); - - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1, - MTK_PHY_DA_TX_I2MPB_C_GBE_MASK, (buf[2] + bias[8]) << 8); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1, - MTK_PHY_DA_TX_I2MPB_C_TBT_MASK, buf[2] + bias[9]); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2, - MTK_PHY_DA_TX_I2MPB_C_HBT_MASK, (buf[2] + bias[10]) << 8); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2, - MTK_PHY_DA_TX_I2MPB_C_TST_MASK, buf[2] + bias[11]); - - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1, - MTK_PHY_DA_TX_I2MPB_D_GBE_MASK, (buf[3] + bias[12]) << 8); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1, - MTK_PHY_DA_TX_I2MPB_D_TBT_MASK, buf[3] + bias[13]); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2, - MTK_PHY_DA_TX_I2MPB_D_HBT_MASK, (buf[3] + bias[14]) << 8); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2, - MTK_PHY_DA_TX_I2MPB_D_TST_MASK, buf[3] + bias[15]); - - return 0; -} - -static int tx_amp_cal_efuse(struct phy_device *phydev, u32 *buf) -{ - u16 tx_amp_cal_val[4]; - - tx_amp_cal_val[0] = EFS_DA_TX_I2MPB_A(buf[0]); - tx_amp_cal_val[1] = EFS_DA_TX_I2MPB_B(buf[0]); - tx_amp_cal_val[2] = EFS_DA_TX_I2MPB_C(buf[0]); - tx_amp_cal_val[3] = EFS_DA_TX_I2MPB_D(buf[0]); - tx_amp_fill_result(phydev, tx_amp_cal_val); - - return 0; -} - -static int tx_r50_fill_result(struct phy_device *phydev, u16 tx_r50_cal_val, - u8 txg_calen_x) -{ - int bias = 0; - u16 reg, val; - - if (phydev->drv->phy_id == MTK_GPHY_ID_MT7988) - bias = -2; - - val = clamp_val(bias + tx_r50_cal_val, 0, 63); - - switch (txg_calen_x) { - case PAIR_A: - reg = MTK_PHY_DA_TX_R50_PAIR_A; - break; - case PAIR_B: - reg = MTK_PHY_DA_TX_R50_PAIR_B; - break; - case PAIR_C: - reg = MTK_PHY_DA_TX_R50_PAIR_C; - break; - case PAIR_D: - reg = MTK_PHY_DA_TX_R50_PAIR_D; - break; - default: - return -EINVAL; - } - - phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, val | val << 8); - - return 0; -} - -static int tx_r50_cal_efuse(struct phy_device *phydev, u32 *buf, - u8 txg_calen_x) -{ - u16 tx_r50_cal_val; - - switch (txg_calen_x) { - case PAIR_A: - tx_r50_cal_val = EFS_DA_TX_R50_A(buf[1]); - break; - case PAIR_B: - tx_r50_cal_val = EFS_DA_TX_R50_B(buf[1]); - break; - case PAIR_C: - tx_r50_cal_val = EFS_DA_TX_R50_C(buf[2]); - break; - case PAIR_D: - tx_r50_cal_val = EFS_DA_TX_R50_D(buf[2]); - break; - default: - return -EINVAL; - } - tx_r50_fill_result(phydev, tx_r50_cal_val, txg_calen_x); - - return 0; -} - -static int tx_vcm_cal_sw(struct phy_device *phydev, u8 rg_txreserve_x) -{ - u8 lower_idx, upper_idx, txreserve_val; - u8 lower_ret, upper_ret; - int ret; - - phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, - MTK_PHY_RG_ANA_CALEN); - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, - MTK_PHY_RG_CAL_CKINV); - phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1, - MTK_PHY_RG_TXVOS_CALEN); - - switch (rg_txreserve_x) { - case PAIR_A: - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_DASN_DAC_IN0_A, - MTK_PHY_DASN_DAC_IN0_A_MASK); - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_DASN_DAC_IN1_A, - MTK_PHY_DASN_DAC_IN1_A_MASK); - phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_ANA_CAL_RG0, - MTK_PHY_RG_ZCALEN_A); - break; - case PAIR_B: - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_DASN_DAC_IN0_B, - MTK_PHY_DASN_DAC_IN0_B_MASK); - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_DASN_DAC_IN1_B, - MTK_PHY_DASN_DAC_IN1_B_MASK); - phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_ANA_CAL_RG1, - MTK_PHY_RG_ZCALEN_B); - break; - case PAIR_C: - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_DASN_DAC_IN0_C, - MTK_PHY_DASN_DAC_IN0_C_MASK); - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_DASN_DAC_IN1_C, - MTK_PHY_DASN_DAC_IN1_C_MASK); - phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_ANA_CAL_RG1, - MTK_PHY_RG_ZCALEN_C); - break; - case PAIR_D: - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_DASN_DAC_IN0_D, - MTK_PHY_DASN_DAC_IN0_D_MASK); - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_DASN_DAC_IN1_D, - MTK_PHY_DASN_DAC_IN1_D_MASK); - phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_ANA_CAL_RG1, - MTK_PHY_RG_ZCALEN_D); - break; - default: - ret = -EINVAL; - goto restore; - } - - lower_idx = TXRESERVE_MIN; - upper_idx = TXRESERVE_MAX; - - phydev_dbg(phydev, "Start TX-VCM SW cal.\n"); - while ((upper_idx - lower_idx) > 1) { - txreserve_val = DIV_ROUND_CLOSEST(lower_idx + upper_idx, 2); - ret = cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9, - MTK_PHY_DA_RX_PSBN_TBT_MASK | - MTK_PHY_DA_RX_PSBN_HBT_MASK | - MTK_PHY_DA_RX_PSBN_GBE_MASK | - MTK_PHY_DA_RX_PSBN_LP_MASK, - txreserve_val << 12 | txreserve_val << 8 | - txreserve_val << 4 | txreserve_val); - if (ret == 1) { - upper_idx = txreserve_val; - upper_ret = ret; - } else if (ret == 0) { - lower_idx = txreserve_val; - lower_ret = ret; - } else { - goto restore; - } - } - - if (lower_idx == TXRESERVE_MIN) { - lower_ret = cal_cycle(phydev, MDIO_MMD_VEND1, - MTK_PHY_RXADC_CTRL_RG9, - MTK_PHY_DA_RX_PSBN_TBT_MASK | - MTK_PHY_DA_RX_PSBN_HBT_MASK | - MTK_PHY_DA_RX_PSBN_GBE_MASK | - MTK_PHY_DA_RX_PSBN_LP_MASK, - lower_idx << 12 | lower_idx << 8 | - lower_idx << 4 | lower_idx); - ret = lower_ret; - } else if (upper_idx == TXRESERVE_MAX) { - upper_ret = cal_cycle(phydev, MDIO_MMD_VEND1, - MTK_PHY_RXADC_CTRL_RG9, - MTK_PHY_DA_RX_PSBN_TBT_MASK | - MTK_PHY_DA_RX_PSBN_HBT_MASK | - MTK_PHY_DA_RX_PSBN_GBE_MASK | - MTK_PHY_DA_RX_PSBN_LP_MASK, - upper_idx << 12 | upper_idx << 8 | - upper_idx << 4 | upper_idx); - ret = upper_ret; - } - if (ret < 0) - goto restore; - - /* We calibrate TX-VCM in different logic. Check upper index and then - * lower index. If this calibration is valid, apply lower index's result. - */ - ret = upper_ret - lower_ret; - if (ret == 1) { - ret = 0; - /* Make sure we use upper_idx in our calibration system */ - cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9, - MTK_PHY_DA_RX_PSBN_TBT_MASK | - MTK_PHY_DA_RX_PSBN_HBT_MASK | - MTK_PHY_DA_RX_PSBN_GBE_MASK | - MTK_PHY_DA_RX_PSBN_LP_MASK, - upper_idx << 12 | upper_idx << 8 | - upper_idx << 4 | upper_idx); - phydev_dbg(phydev, "TX-VCM SW cal result: 0x%x\n", upper_idx); - } else if (lower_idx == TXRESERVE_MIN && upper_ret == 1 && - lower_ret == 1) { - ret = 0; - cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9, - MTK_PHY_DA_RX_PSBN_TBT_MASK | - MTK_PHY_DA_RX_PSBN_HBT_MASK | - MTK_PHY_DA_RX_PSBN_GBE_MASK | - MTK_PHY_DA_RX_PSBN_LP_MASK, - lower_idx << 12 | lower_idx << 8 | - lower_idx << 4 | lower_idx); - phydev_warn(phydev, "TX-VCM SW cal result at low margin 0x%x\n", - lower_idx); - } else if (upper_idx == TXRESERVE_MAX && upper_ret == 0 && - lower_ret == 0) { - ret = 0; - phydev_warn(phydev, "TX-VCM SW cal result at high margin 0x%x\n", - upper_idx); - } else { - ret = -EINVAL; - } - -restore: - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, - MTK_PHY_RG_ANA_CALEN); - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1, - MTK_PHY_RG_TXVOS_CALEN); - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, - MTK_PHY_RG_ZCALEN_A); - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1, - MTK_PHY_RG_ZCALEN_B | MTK_PHY_RG_ZCALEN_C | - MTK_PHY_RG_ZCALEN_D); - - return ret; -} - -static void mt798x_phy_common_finetune(struct phy_device *phydev) -{ - phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); - /* EnabRandUpdTrig = 1 */ - __phy_write(phydev, 0x11, 0x2f00); - __phy_write(phydev, 0x12, 0xe); - __phy_write(phydev, 0x10, 0x8fb0); - - /* NormMseLoThresh = 85 */ - __phy_write(phydev, 0x11, 0x55a0); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x83aa); - - /* TrFreeze = 0 */ - __phy_write(phydev, 0x11, 0x0); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x9686); - - /* SSTrKp1000Slv = 5 */ - __phy_write(phydev, 0x11, 0xbaef); - __phy_write(phydev, 0x12, 0x2e); - __phy_write(phydev, 0x10, 0x968c); - - /* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2, - * MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2 - */ - __phy_write(phydev, 0x11, 0xd10a); - __phy_write(phydev, 0x12, 0x34); - __phy_write(phydev, 0x10, 0x8f82); - - /* VcoSlicerThreshBitsHigh */ - __phy_write(phydev, 0x11, 0x5555); - __phy_write(phydev, 0x12, 0x55); - __phy_write(phydev, 0x10, 0x8ec0); - phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); - - /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9*/ - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234, - MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK, - BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9)); - - /* rg_tr_lpf_cnt_val = 512 */ - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x200); - - /* IIR2 related */ - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_L, 0x82); - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_U, 0x0); - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_L, 0x103); - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_U, 0x0); - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_L, 0x82); - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_U, 0x0); - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_L, 0xd177); - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_U, 0x3); - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_L, 0x2c82); - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_U, 0xe); - - /* FFE peaking */ - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27C, - MTK_PHY_VGASTATE_FFE_THR_ST1_MASK, 0x1b << 8); - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27D, - MTK_PHY_VGASTATE_FFE_THR_ST2_MASK, 0x1e); - - /* Disable LDO pump */ - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRAB, 0x0); - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRCD, 0x0); - /* Adjust LDO output voltage */ - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222); -} - -static void mt7981_phy_finetune(struct phy_device *phydev) -{ - u16 val[8] = { 0x01ce, 0x01c1, - 0x020f, 0x0202, - 0x03d0, 0x03c0, - 0x0013, 0x0005 }; - int i, k; - - /* 100M eye finetune: - * Keep middle level of TX MLT3 shapper as default. - * Only change TX MLT3 overshoot level here. - */ - for (k = 0, i = 1; i < 12; i++) { - if (i % 3 == 0) - continue; - phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]); - } - - phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); - /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */ - __phy_write(phydev, 0x11, 0xc71); - __phy_write(phydev, 0x12, 0xc); - __phy_write(phydev, 0x10, 0x8fae); - - /* ResetSyncOffset = 6 */ - __phy_write(phydev, 0x11, 0x600); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x8fc0); - - /* VgaDecRate = 1 */ - __phy_write(phydev, 0x11, 0x4c2a); - __phy_write(phydev, 0x12, 0x3e); - __phy_write(phydev, 0x10, 0x8fa4); - - /* FfeUpdGainForce = 4 */ - __phy_write(phydev, 0x11, 0x240); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x9680); - - phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); -} - -static void mt7988_phy_finetune(struct phy_device *phydev) -{ - u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182, - 0x020d, 0x0206, 0x0384, 0x03d0, - 0x03c6, 0x030a, 0x0011, 0x0005 }; - int i; - - /* Set default MLT3 shaper first */ - for (i = 0; i < 12; i++) - phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[i]); - - /* TCT finetune */ - phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5); - - /* Disable TX power saving */ - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7, - MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8); - - phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); - - /* SlvDSPreadyTime = 24, MasDSPreadyTime = 12 */ - __phy_write(phydev, 0x11, 0x671); - __phy_write(phydev, 0x12, 0xc); - __phy_write(phydev, 0x10, 0x8fae); - - /* ResetSyncOffset = 5 */ - __phy_write(phydev, 0x11, 0x500); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x8fc0); - - /* VgaDecRate is 1 at default on mt7988 */ - - phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); - - phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_2A30); - /* TxClkOffset = 2 */ - __phy_modify(phydev, MTK_PHY_ANARG_RG, MTK_PHY_TCLKOFFSET_MASK, - FIELD_PREP(MTK_PHY_TCLKOFFSET_MASK, 0x2)); - phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); -} - -static void mt798x_phy_eee(struct phy_device *phydev) -{ - phy_modify_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120, - MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK | - MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK, - FIELD_PREP(MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK, 0x0) | - FIELD_PREP(MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK, 0x14)); - - phy_modify_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122, - MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, - FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, - 0xff)); - - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_TESTMUX_ADC_CTRL, - MTK_PHY_RG_TXEN_DIG_MASK); - - phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_DEV1E_REG19b, MTK_PHY_BYPASS_DSP_LPI_READY); - - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_DEV1E_REG234, MTK_PHY_TR_LP_IIR_EEE_EN); - - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG238, - MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK | - MTK_PHY_LPI_SLV_SEND_TX_EN, - FIELD_PREP(MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK, 0x120)); - - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239, - MTK_PHY_LPI_SEND_LOC_TIMER_MASK | - MTK_PHY_LPI_TXPCS_LOC_RCV, - FIELD_PREP(MTK_PHY_LPI_SEND_LOC_TIMER_MASK, 0x117)); - - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2C7, - MTK_PHY_MAX_GAIN_MASK | MTK_PHY_MIN_GAIN_MASK, - FIELD_PREP(MTK_PHY_MAX_GAIN_MASK, 0x8) | - FIELD_PREP(MTK_PHY_MIN_GAIN_MASK, 0x13)); - - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2D1, - MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK, - FIELD_PREP(MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK, - 0x33) | - MTK_PHY_LPI_SKIP_SD_SLV_TR | MTK_PHY_LPI_TR_READY | - MTK_PHY_LPI_VCO_EEE_STG0_EN); - - phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG323, - MTK_PHY_EEE_WAKE_MAS_INT_DC | - MTK_PHY_EEE_WAKE_SLV_INT_DC); - - phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG324, - MTK_PHY_SMI_DETCNT_MAX_MASK, - FIELD_PREP(MTK_PHY_SMI_DETCNT_MAX_MASK, 0x3f) | - MTK_PHY_SMI_DET_MAX_EN); - - phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG326, - MTK_PHY_LPI_MODE_SD_ON | MTK_PHY_RESET_RANDUPD_CNT | - MTK_PHY_TREC_UPDATE_ENAB_CLR | - MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF | - MTK_PHY_TR_READY_SKIP_AFE_WAKEUP); - - phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); - /* Regsigdet_sel_1000 = 0 */ - __phy_write(phydev, 0x11, 0xb); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x9690); - - /* REG_EEE_st2TrKf1000 = 3 */ - __phy_write(phydev, 0x11, 0x114f); - __phy_write(phydev, 0x12, 0x2); - __phy_write(phydev, 0x10, 0x969a); - - /* RegEEE_slv_wake_tr_timer_tar = 6, RegEEE_slv_remtx_timer_tar = 20 */ - __phy_write(phydev, 0x11, 0x3028); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x969e); - - /* RegEEE_slv_wake_int_timer_tar = 8 */ - __phy_write(phydev, 0x11, 0x5010); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x96a0); - - /* RegEEE_trfreeze_timer2 = 586 */ - __phy_write(phydev, 0x11, 0x24a); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x96a8); - - /* RegEEE100Stg1_tar = 16 */ - __phy_write(phydev, 0x11, 0x3210); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x96b8); - - /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 1 */ - __phy_write(phydev, 0x11, 0x1463); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x96ca); - - /* DfeTailEnableVgaThresh1000 = 27 */ - __phy_write(phydev, 0x11, 0x36); - __phy_write(phydev, 0x12, 0x0); - __phy_write(phydev, 0x10, 0x8f80); - phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); - - phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3); - __phy_modify(phydev, MTK_PHY_LPI_REG_14, MTK_PHY_LPI_WAKE_TIMER_1000_MASK, - FIELD_PREP(MTK_PHY_LPI_WAKE_TIMER_1000_MASK, 0x19c)); - - __phy_modify(phydev, MTK_PHY_LPI_REG_1c, MTK_PHY_SMI_DET_ON_THRESH_MASK, - FIELD_PREP(MTK_PHY_SMI_DET_ON_THRESH_MASK, 0xc)); - phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); - - phy_modify_mmd(phydev, MDIO_MMD_VEND1, - MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122, - MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, - FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, 0xff)); -} - -static int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item, - u8 start_pair, u8 end_pair) -{ - u8 pair_n; - int ret; - - for (pair_n = start_pair; pair_n <= end_pair; pair_n++) { - /* TX_OFFSET & TX_AMP have no SW calibration. */ - switch (cal_item) { - case TX_VCM: - ret = tx_vcm_cal_sw(phydev, pair_n); - break; - default: - return -EINVAL; - } - if (ret) - return ret; - } - return 0; -} - -static int cal_efuse(struct phy_device *phydev, enum CAL_ITEM cal_item, - u8 start_pair, u8 end_pair, u32 *buf) -{ - u8 pair_n; - int ret; - - for (pair_n = start_pair; pair_n <= end_pair; pair_n++) { - /* TX_VCM has no efuse calibration. */ - switch (cal_item) { - case REXT: - ret = rext_cal_efuse(phydev, buf); - break; - case TX_OFFSET: - ret = tx_offset_cal_efuse(phydev, buf); - break; - case TX_AMP: - ret = tx_amp_cal_efuse(phydev, buf); - break; - case TX_R50: - ret = tx_r50_cal_efuse(phydev, buf, pair_n); - break; - default: - return -EINVAL; - } - if (ret) - return ret; - } - - return 0; -} - -static int start_cal(struct phy_device *phydev, enum CAL_ITEM cal_item, - enum CAL_MODE cal_mode, u8 start_pair, - u8 end_pair, u32 *buf) -{ - int ret; - - switch (cal_mode) { - case EFUSE_M: - ret = cal_efuse(phydev, cal_item, start_pair, - end_pair, buf); - break; - case SW_M: - ret = cal_sw(phydev, cal_item, start_pair, end_pair); - break; - default: - return -EINVAL; - } - - if (ret) { - phydev_err(phydev, "cal %d failed\n", cal_item); - return -EIO; - } - - return 0; -} - -static int mt798x_phy_calibration(struct phy_device *phydev) -{ - int ret = 0; - u32 *buf; - size_t len; - struct nvmem_cell *cell; - - cell = nvmem_cell_get(&phydev->mdio.dev, "phy-cal-data"); - if (IS_ERR(cell)) { - if (PTR_ERR(cell) == -EPROBE_DEFER) - return PTR_ERR(cell); - return 0; - } - - buf = (u32 *)nvmem_cell_read(cell, &len); - if (IS_ERR(buf)) - return PTR_ERR(buf); - nvmem_cell_put(cell); - - if (!buf[0] || !buf[1] || !buf[2] || !buf[3] || len < 4 * sizeof(u32)) { - phydev_err(phydev, "invalid efuse data\n"); - ret = -EINVAL; - goto out; - } - - ret = start_cal(phydev, REXT, EFUSE_M, NO_PAIR, NO_PAIR, buf); - if (ret) - goto out; - ret = start_cal(phydev, TX_OFFSET, EFUSE_M, NO_PAIR, NO_PAIR, buf); - if (ret) - goto out; - ret = start_cal(phydev, TX_AMP, EFUSE_M, NO_PAIR, NO_PAIR, buf); - if (ret) - goto out; - ret = start_cal(phydev, TX_R50, EFUSE_M, PAIR_A, PAIR_D, buf); - if (ret) - goto out; - ret = start_cal(phydev, TX_VCM, SW_M, PAIR_A, PAIR_A, buf); - if (ret) - goto out; - -out: - kfree(buf); - return ret; -} - -static int mt798x_phy_config_init(struct phy_device *phydev) -{ - switch (phydev->drv->phy_id) { - case MTK_GPHY_ID_MT7981: - mt7981_phy_finetune(phydev); - break; - case MTK_GPHY_ID_MT7988: - mt7988_phy_finetune(phydev); - break; - } - - mt798x_phy_common_finetune(phydev); - mt798x_phy_eee(phydev); - - return mt798x_phy_calibration(phydev); -} - -static int mt7988_phy_setup_led(struct phy_device *phydev) -{ - struct mtk_socphy_shared_priv *priv = phydev->shared->priv; - int port = phydev->mdio.addr; - u32 reg = priv->boottrap; - struct pinctrl *pinctrl; - - phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL, - MTK_PHY_LED0_ENABLE | MTK_PHY_LED0_POLARITY | - MTK_PHY_LED0_ON_LINK10 | - MTK_PHY_LED0_ON_LINK100 | - MTK_PHY_LED0_ON_LINK1000); - phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL, - MTK_PHY_LED1_ENABLE | MTK_PHY_LED1_POLARITY | - MTK_PHY_LED1_ON_LINK10 | - MTK_PHY_LED1_ON_LINK100 | - MTK_PHY_LED1_ON_LINK1000); - - if ((port == GPHY_PORT0 && reg & BIT(8)) || - (port == GPHY_PORT1 && reg & BIT(9)) || - (port == GPHY_PORT2 && reg & BIT(10)) || - (port == GPHY_PORT3 && reg & BIT(11))) { - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL, - MTK_PHY_LED0_POLARITY); - phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL, - MTK_PHY_LED1_POLARITY); - } - - phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_BLINK_CTRL, - MTK_PHY_LED0_1000TX | MTK_PHY_LED0_1000RX | - MTK_PHY_LED0_100TX | MTK_PHY_LED0_100RX | - MTK_PHY_LED0_10TX | MTK_PHY_LED0_10RX); - phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_BLINK_CTRL, - MTK_PHY_LED1_1000TX | MTK_PHY_LED1_1000RX | - MTK_PHY_LED1_100TX | MTK_PHY_LED1_100RX | - MTK_PHY_LED1_10TX | MTK_PHY_LED1_10RX); - - pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led"); - if (IS_ERR(pinctrl)) { - dev_err(&phydev->mdio.bus->dev, "Failed to setup LED pins\n"); - return PTR_ERR(pinctrl); - } - - return 0; -} - -static int mt7988_phy_probe_shared(struct phy_device *phydev) -{ - struct mtk_socphy_shared_priv *priv = phydev->shared->priv; - void __iomem *boottrap; - struct device_node *np; - u32 reg; - - np = of_find_compatible_node(NULL, NULL, "mediatek,boottrap"); - if (!np) - return -ENOENT; - - boottrap = of_iomap(np, 0); - if (!boottrap) - return -ENOMEM; - - reg = readl(boottrap); - iounmap(boottrap); - - priv->boottrap = reg; - - return 0; -} - -static int mt7981_phy_probe(struct phy_device *phydev) -{ - return mt798x_phy_calibration(phydev); -} - -static int mt7988_phy_probe(struct phy_device *phydev) -{ - int err; - - err = devm_phy_package_join(&phydev->mdio.dev, phydev, 0, - sizeof(struct mtk_socphy_shared_priv)); - if (err) - return err; - - if (phy_package_probe_once(phydev)) { - err = mt7988_phy_probe_shared(phydev); - if (err) - return err; - } - - mt7988_phy_setup_led(phydev); - - return mt798x_phy_calibration(phydev); -} - -static struct phy_driver mtk_socphy_driver[] = { - { - PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981), - .name = "MediaTek MT7981 PHY", - .config_init = mt798x_phy_config_init, - .config_intr = genphy_no_config_intr, - .handle_interrupt = genphy_handle_interrupt_no_ack, - .probe = mt7981_phy_probe, - .suspend = genphy_suspend, - .resume = genphy_resume, - .read_page = mtk_socphy_read_page, - .write_page = mtk_socphy_write_page, - }, - { - PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988), - .name = "MediaTek MT7988 PHY", - .config_init = mt798x_phy_config_init, - .config_intr = genphy_no_config_intr, - .handle_interrupt = genphy_handle_interrupt_no_ack, - .probe = mt7988_phy_probe, - .suspend = genphy_suspend, - .resume = genphy_resume, - .read_page = mtk_socphy_read_page, - .write_page = mtk_socphy_write_page, - }, -}; - -module_phy_driver(mtk_socphy_driver); - -static struct mdio_device_id __maybe_unused mtk_socphy_tbl[] = { - { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981) }, - { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988) }, - { } -}; - -MODULE_DESCRIPTION("MediaTek SoC Gigabit Ethernet PHY driver"); -MODULE_AUTHOR("Daniel Golle "); -MODULE_AUTHOR("SkyLake Huang "); -MODULE_LICENSE("GPL"); - -MODULE_DEVICE_TABLE(mdio, mtk_socphy_tbl); diff --git a/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch b/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch deleted file mode 100644 index 43876deb66..0000000000 --- a/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 60ed9eb9605656c19ca402b7bd3f47552e901601 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Mon, 13 Feb 2023 02:33:14 +0000 -Subject: [PATCH] net: phy: add driver for MediaTek SoC built-in GE PHYs - -Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet -PHYs which require calibration data from the SoC's efuse. -Despite the similar design the driver doesn't share any code with the -existing mediatek-ge.c, so add support for these PHYs by introducing a -new driver for only MediaTek's ARM64 SoCs. - -Signed-off-by: Daniel Golle ---- - MAINTAINERS | 9 + - drivers/net/phy/Kconfig | 12 + - drivers/net/phy/Makefile | 1 + - drivers/net/phy/mediatek-ge-soc.c | 1263 +++++++++++++++++++++++++++++ - drivers/net/phy/mediatek-ge.c | 3 +- - 5 files changed, 1287 insertions(+), 1 deletion(-) - create mode 100644 drivers/net/phy/mediatek-ge-soc.c - ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -11790,6 +11790,15 @@ S: Maintained - F: drivers/net/pcs/pcs-mtk-lynxi.c - F: include/linux/pcs/pcs-mtk-lynxi.h - -+MEDIATEK ETHERNET PHY DRIVERS -+M: Daniel Golle -+M: Qingfang Deng -+M: SkyLake Huang -+L: netdev@vger.kernel.org -+S: Maintained -+F: drivers/net/phy/mediatek-ge-soc.c -+F: drivers/net/phy/mediatek-ge.c -+ - MEDIATEK I2C CONTROLLER DRIVER - M: Qii Wang - L: linux-i2c@vger.kernel.org ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -293,6 +293,18 @@ config MEDIATEK_GE_PHY - help - Supports the MediaTek Gigabit Ethernet PHYs. - -+config MEDIATEK_GE_SOC_PHY -+ tristate "MediaTek SoC Ethernet PHYs" -+ depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST -+ select NVMEM_MTK_EFUSE -+ help -+ Supports MediaTek SoC built-in Gigabit Ethernet PHYs. -+ -+ Include support for built-in Ethernet PHYs which are present in -+ the MT7981 and MT7988 SoCs. These PHYs need calibration data -+ present in the SoCs efuse and will dynamically calibrate VCM -+ (common-mode voltage) during startup. -+ - config MICREL_PHY - tristate "Micrel PHYs" - help ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -81,6 +81,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o - obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o - obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o - obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o -+obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mediatek-ge-soc.o - obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o - obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o - obj-$(CONFIG_MICREL_PHY) += micrel.o ---- a/drivers/net/phy/mediatek-ge.c -+++ b/drivers/net/phy/mediatek-ge.c -@@ -136,7 +136,8 @@ static struct phy_driver mtk_gephy_drive - module_phy_driver(mtk_gephy_driver); - - static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = { -- { PHY_ID_MATCH_VENDOR(0x03a29400) }, -+ { PHY_ID_MATCH_EXACT(0x03a29441) }, -+ { PHY_ID_MATCH_EXACT(0x03a29412) }, - { } - }; - diff --git a/target/linux/mediatek/patches-5.15/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch b/target/linux/mediatek/patches-5.15/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch new file mode 100644 index 0000000000..26ebcb6733 --- /dev/null +++ b/target/linux/mediatek/patches-5.15/730-v6.5-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch @@ -0,0 +1,1204 @@ +From 98c485eaf509bc0e2a85f9b58d17cd501f274c4e Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Sun, 11 Jun 2023 00:48:10 +0100 +Subject: [PATCH] net: phy: add driver for MediaTek SoC built-in GE PHYs + +Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet +PHYs which require calibration data from the SoC's efuse. +Despite the similar design the driver doesn't share any code with the +existing mediatek-ge.c. +Add support for such PHYs by introducing a new driver with basic +support for MediaTek SoCs MT7981 and MT7988 built-in 1GE PHYs. + +Signed-off-by: Daniel Golle +Reviewed-by: Andrew Lunn +Signed-off-by: David S. Miller +--- + MAINTAINERS | 9 + + drivers/net/phy/Kconfig | 12 + + drivers/net/phy/Makefile | 1 + + drivers/net/phy/mediatek-ge-soc.c | 1116 +++++++++++++++++++++++++++++ + drivers/net/phy/mediatek-ge.c | 3 +- + 5 files changed, 1140 insertions(+), 1 deletion(-) + create mode 100644 drivers/net/phy/mediatek-ge-soc.c + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -11790,6 +11790,15 @@ S: Maintained + F: drivers/net/pcs/pcs-mtk-lynxi.c + F: include/linux/pcs/pcs-mtk-lynxi.h + ++MEDIATEK ETHERNET PHY DRIVERS ++M: Daniel Golle ++M: Qingfang Deng ++M: SkyLake Huang ++L: netdev@vger.kernel.org ++S: Maintained ++F: drivers/net/phy/mediatek-ge-soc.c ++F: drivers/net/phy/mediatek-ge.c ++ + MEDIATEK I2C CONTROLLER DRIVER + M: Qii Wang + L: linux-i2c@vger.kernel.org +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -293,6 +293,18 @@ config MEDIATEK_GE_PHY + help + Supports the MediaTek Gigabit Ethernet PHYs. + ++config MEDIATEK_GE_SOC_PHY ++ tristate "MediaTek SoC Ethernet PHYs" ++ depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST ++ select NVMEM_MTK_EFUSE ++ help ++ Supports MediaTek SoC built-in Gigabit Ethernet PHYs. ++ ++ Include support for built-in Ethernet PHYs which are present in ++ the MT7981 and MT7988 SoCs. These PHYs need calibration data ++ present in the SoCs efuse and will dynamically calibrate VCM ++ (common-mode voltage) during startup. ++ + config MICREL_PHY + tristate "Micrel PHYs" + help +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -81,6 +81,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o + obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o + obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o + obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o ++obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mediatek-ge-soc.o + obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o + obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o + obj-$(CONFIG_MICREL_PHY) += micrel.o +--- /dev/null ++++ b/drivers/net/phy/mediatek-ge-soc.c +@@ -0,0 +1,1116 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define MTK_GPHY_ID_MT7981 0x03a29461 ++#define MTK_GPHY_ID_MT7988 0x03a29481 ++ ++#define MTK_EXT_PAGE_ACCESS 0x1f ++#define MTK_PHY_PAGE_STANDARD 0x0000 ++#define MTK_PHY_PAGE_EXTENDED_3 0x0003 ++ ++#define MTK_PHY_LPI_REG_14 0x14 ++#define MTK_PHY_LPI_WAKE_TIMER_1000_MASK GENMASK(8, 0) ++ ++#define MTK_PHY_LPI_REG_1c 0x1c ++#define MTK_PHY_SMI_DET_ON_THRESH_MASK GENMASK(13, 8) ++ ++#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30 ++#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5 ++ ++#define ANALOG_INTERNAL_OPERATION_MAX_US 20 ++#define TXRESERVE_MIN 0 ++#define TXRESERVE_MAX 7 ++ ++#define MTK_PHY_ANARG_RG 0x10 ++#define MTK_PHY_TCLKOFFSET_MASK GENMASK(12, 8) ++ ++/* Registers on MDIO_MMD_VEND1 */ ++#define MTK_PHY_TXVLD_DA_RG 0x12 ++#define MTK_PHY_DA_TX_I2MPB_A_GBE_MASK GENMASK(15, 10) ++#define MTK_PHY_DA_TX_I2MPB_A_TBT_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TX_I2MPB_TEST_MODE_A2 0x16 ++#define MTK_PHY_DA_TX_I2MPB_A_HBT_MASK GENMASK(15, 10) ++#define MTK_PHY_DA_TX_I2MPB_A_TST_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TX_I2MPB_TEST_MODE_B1 0x17 ++#define MTK_PHY_DA_TX_I2MPB_B_GBE_MASK GENMASK(13, 8) ++#define MTK_PHY_DA_TX_I2MPB_B_TBT_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TX_I2MPB_TEST_MODE_B2 0x18 ++#define MTK_PHY_DA_TX_I2MPB_B_HBT_MASK GENMASK(13, 8) ++#define MTK_PHY_DA_TX_I2MPB_B_TST_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TX_I2MPB_TEST_MODE_C1 0x19 ++#define MTK_PHY_DA_TX_I2MPB_C_GBE_MASK GENMASK(13, 8) ++#define MTK_PHY_DA_TX_I2MPB_C_TBT_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TX_I2MPB_TEST_MODE_C2 0x20 ++#define MTK_PHY_DA_TX_I2MPB_C_HBT_MASK GENMASK(13, 8) ++#define MTK_PHY_DA_TX_I2MPB_C_TST_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TX_I2MPB_TEST_MODE_D1 0x21 ++#define MTK_PHY_DA_TX_I2MPB_D_GBE_MASK GENMASK(13, 8) ++#define MTK_PHY_DA_TX_I2MPB_D_TBT_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TX_I2MPB_TEST_MODE_D2 0x22 ++#define MTK_PHY_DA_TX_I2MPB_D_HBT_MASK GENMASK(13, 8) ++#define MTK_PHY_DA_TX_I2MPB_D_TST_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_RXADC_CTRL_RG7 0xc6 ++#define MTK_PHY_DA_AD_BUF_BIAS_LP_MASK GENMASK(9, 8) ++ ++#define MTK_PHY_RXADC_CTRL_RG9 0xc8 ++#define MTK_PHY_DA_RX_PSBN_TBT_MASK GENMASK(14, 12) ++#define MTK_PHY_DA_RX_PSBN_HBT_MASK GENMASK(10, 8) ++#define MTK_PHY_DA_RX_PSBN_GBE_MASK GENMASK(6, 4) ++#define MTK_PHY_DA_RX_PSBN_LP_MASK GENMASK(2, 0) ++ ++#define MTK_PHY_LDO_OUTPUT_V 0xd7 ++ ++#define MTK_PHY_RG_ANA_CAL_RG0 0xdb ++#define MTK_PHY_RG_CAL_CKINV BIT(12) ++#define MTK_PHY_RG_ANA_CALEN BIT(8) ++#define MTK_PHY_RG_ZCALEN_A BIT(0) ++ ++#define MTK_PHY_RG_ANA_CAL_RG1 0xdc ++#define MTK_PHY_RG_ZCALEN_B BIT(12) ++#define MTK_PHY_RG_ZCALEN_C BIT(8) ++#define MTK_PHY_RG_ZCALEN_D BIT(4) ++#define MTK_PHY_RG_TXVOS_CALEN BIT(0) ++ ++#define MTK_PHY_RG_ANA_CAL_RG5 0xe0 ++#define MTK_PHY_RG_REXT_TRIM_MASK GENMASK(13, 8) ++ ++#define MTK_PHY_RG_TX_FILTER 0xfe ++ ++#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120 0x120 ++#define MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK GENMASK(12, 8) ++#define MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK GENMASK(4, 0) ++ ++#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122 0x122 ++#define MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK GENMASK(7, 0) ++ ++#define MTK_PHY_RG_TESTMUX_ADC_CTRL 0x144 ++#define MTK_PHY_RG_TXEN_DIG_MASK GENMASK(5, 5) ++ ++#define MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B 0x172 ++#define MTK_PHY_CR_TX_AMP_OFFSET_A_MASK GENMASK(13, 8) ++#define MTK_PHY_CR_TX_AMP_OFFSET_B_MASK GENMASK(6, 0) ++ ++#define MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D 0x173 ++#define MTK_PHY_CR_TX_AMP_OFFSET_C_MASK GENMASK(13, 8) ++#define MTK_PHY_CR_TX_AMP_OFFSET_D_MASK GENMASK(6, 0) ++ ++#define MTK_PHY_RG_AD_CAL_COMP 0x17a ++#define MTK_PHY_AD_CAL_COMP_OUT_SHIFT (8) ++ ++#define MTK_PHY_RG_AD_CAL_CLK 0x17b ++#define MTK_PHY_DA_CAL_CLK BIT(0) ++ ++#define MTK_PHY_RG_AD_CALIN 0x17c ++#define MTK_PHY_DA_CALIN_FLAG BIT(0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN0_A 0x17d ++#define MTK_PHY_DASN_DAC_IN0_A_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN0_B 0x17e ++#define MTK_PHY_DASN_DAC_IN0_B_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN0_C 0x17f ++#define MTK_PHY_DASN_DAC_IN0_C_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN0_D 0x180 ++#define MTK_PHY_DASN_DAC_IN0_D_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN1_A 0x181 ++#define MTK_PHY_DASN_DAC_IN1_A_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN1_B 0x182 ++#define MTK_PHY_DASN_DAC_IN1_B_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN1_C 0x183 ++#define MTK_PHY_DASN_DAC_IN1_C_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN1_D 0x184 ++#define MTK_PHY_DASN_DAC_IN1_D_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DEV1E_REG19b 0x19b ++#define MTK_PHY_BYPASS_DSP_LPI_READY BIT(8) ++ ++#define MTK_PHY_RG_LP_IIR2_K1_L 0x22a ++#define MTK_PHY_RG_LP_IIR2_K1_U 0x22b ++#define MTK_PHY_RG_LP_IIR2_K2_L 0x22c ++#define MTK_PHY_RG_LP_IIR2_K2_U 0x22d ++#define MTK_PHY_RG_LP_IIR2_K3_L 0x22e ++#define MTK_PHY_RG_LP_IIR2_K3_U 0x22f ++#define MTK_PHY_RG_LP_IIR2_K4_L 0x230 ++#define MTK_PHY_RG_LP_IIR2_K4_U 0x231 ++#define MTK_PHY_RG_LP_IIR2_K5_L 0x232 ++#define MTK_PHY_RG_LP_IIR2_K5_U 0x233 ++ ++#define MTK_PHY_RG_DEV1E_REG234 0x234 ++#define MTK_PHY_TR_OPEN_LOOP_EN_MASK GENMASK(0, 0) ++#define MTK_PHY_LPF_X_AVERAGE_MASK GENMASK(7, 4) ++#define MTK_PHY_TR_LP_IIR_EEE_EN BIT(12) ++ ++#define MTK_PHY_RG_LPF_CNT_VAL 0x235 ++ ++#define MTK_PHY_RG_DEV1E_REG238 0x238 ++#define MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK GENMASK(8, 0) ++#define MTK_PHY_LPI_SLV_SEND_TX_EN BIT(12) ++ ++#define MTK_PHY_RG_DEV1E_REG239 0x239 ++#define MTK_PHY_LPI_SEND_LOC_TIMER_MASK GENMASK(8, 0) ++#define MTK_PHY_LPI_TXPCS_LOC_RCV BIT(12) ++ ++#define MTK_PHY_RG_DEV1E_REG27C 0x27c ++#define MTK_PHY_VGASTATE_FFE_THR_ST1_MASK GENMASK(12, 8) ++#define MTK_PHY_RG_DEV1E_REG27D 0x27d ++#define MTK_PHY_VGASTATE_FFE_THR_ST2_MASK GENMASK(4, 0) ++ ++#define MTK_PHY_RG_DEV1E_REG2C7 0x2c7 ++#define MTK_PHY_MAX_GAIN_MASK GENMASK(4, 0) ++#define MTK_PHY_MIN_GAIN_MASK GENMASK(12, 8) ++ ++#define MTK_PHY_RG_DEV1E_REG2D1 0x2d1 ++#define MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK GENMASK(7, 0) ++#define MTK_PHY_LPI_SKIP_SD_SLV_TR BIT(8) ++#define MTK_PHY_LPI_TR_READY BIT(9) ++#define MTK_PHY_LPI_VCO_EEE_STG0_EN BIT(10) ++ ++#define MTK_PHY_RG_DEV1E_REG323 0x323 ++#define MTK_PHY_EEE_WAKE_MAS_INT_DC BIT(0) ++#define MTK_PHY_EEE_WAKE_SLV_INT_DC BIT(4) ++ ++#define MTK_PHY_RG_DEV1E_REG324 0x324 ++#define MTK_PHY_SMI_DETCNT_MAX_MASK GENMASK(5, 0) ++#define MTK_PHY_SMI_DET_MAX_EN BIT(8) ++ ++#define MTK_PHY_RG_DEV1E_REG326 0x326 ++#define MTK_PHY_LPI_MODE_SD_ON BIT(0) ++#define MTK_PHY_RESET_RANDUPD_CNT BIT(1) ++#define MTK_PHY_TREC_UPDATE_ENAB_CLR BIT(2) ++#define MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF BIT(4) ++#define MTK_PHY_TR_READY_SKIP_AFE_WAKEUP BIT(5) ++ ++#define MTK_PHY_LDO_PUMP_EN_PAIRAB 0x502 ++#define MTK_PHY_LDO_PUMP_EN_PAIRCD 0x503 ++ ++#define MTK_PHY_DA_TX_R50_PAIR_A 0x53d ++#define MTK_PHY_DA_TX_R50_PAIR_B 0x53e ++#define MTK_PHY_DA_TX_R50_PAIR_C 0x53f ++#define MTK_PHY_DA_TX_R50_PAIR_D 0x540 ++ ++#define MTK_PHY_RG_BG_RASEL 0x115 ++#define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0) ++ ++/* These macro privides efuse parsing for internal phy. */ ++#define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0)) ++#define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0)) ++#define EFS_DA_TX_I2MPB_C(x) (((x) >> 12) & GENMASK(5, 0)) ++#define EFS_DA_TX_I2MPB_D(x) (((x) >> 18) & GENMASK(5, 0)) ++#define EFS_DA_TX_AMP_OFFSET_A(x) (((x) >> 24) & GENMASK(5, 0)) ++ ++#define EFS_DA_TX_AMP_OFFSET_B(x) (((x) >> 0) & GENMASK(5, 0)) ++#define EFS_DA_TX_AMP_OFFSET_C(x) (((x) >> 6) & GENMASK(5, 0)) ++#define EFS_DA_TX_AMP_OFFSET_D(x) (((x) >> 12) & GENMASK(5, 0)) ++#define EFS_DA_TX_R50_A(x) (((x) >> 18) & GENMASK(5, 0)) ++#define EFS_DA_TX_R50_B(x) (((x) >> 24) & GENMASK(5, 0)) ++ ++#define EFS_DA_TX_R50_C(x) (((x) >> 0) & GENMASK(5, 0)) ++#define EFS_DA_TX_R50_D(x) (((x) >> 6) & GENMASK(5, 0)) ++ ++#define EFS_RG_BG_RASEL(x) (((x) >> 4) & GENMASK(2, 0)) ++#define EFS_RG_REXT_TRIM(x) (((x) >> 7) & GENMASK(5, 0)) ++ ++enum { ++ NO_PAIR, ++ PAIR_A, ++ PAIR_B, ++ PAIR_C, ++ PAIR_D, ++}; ++ ++enum { ++ GPHY_PORT0, ++ GPHY_PORT1, ++ GPHY_PORT2, ++ GPHY_PORT3, ++}; ++ ++enum calibration_mode { ++ EFUSE_K, ++ SW_K ++}; ++ ++enum CAL_ITEM { ++ REXT, ++ TX_OFFSET, ++ TX_AMP, ++ TX_R50, ++ TX_VCM ++}; ++ ++enum CAL_MODE { ++ EFUSE_M, ++ SW_M ++}; ++ ++static int mtk_socphy_read_page(struct phy_device *phydev) ++{ ++ return __phy_read(phydev, MTK_EXT_PAGE_ACCESS); ++} ++ ++static int mtk_socphy_write_page(struct phy_device *phydev, int page) ++{ ++ return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page); ++} ++ ++/* One calibration cycle consists of: ++ * 1.Set DA_CALIN_FLAG high to start calibration. Keep it high ++ * until AD_CAL_COMP is ready to output calibration result. ++ * 2.Wait until DA_CAL_CLK is available. ++ * 3.Fetch AD_CAL_COMP_OUT. ++ */ ++static int cal_cycle(struct phy_device *phydev, int devad, ++ u32 regnum, u16 mask, u16 cal_val) ++{ ++ int reg_val; ++ int ret; ++ ++ phy_modify_mmd(phydev, devad, regnum, ++ mask, cal_val); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN, ++ MTK_PHY_DA_CALIN_FLAG); ++ ++ ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_AD_CAL_CLK, reg_val, ++ reg_val & MTK_PHY_DA_CAL_CLK, 500, ++ ANALOG_INTERNAL_OPERATION_MAX_US, false); ++ if (ret) { ++ phydev_err(phydev, "Calibration cycle timeout\n"); ++ return ret; ++ } ++ ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN, ++ MTK_PHY_DA_CALIN_FLAG); ++ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >> ++ MTK_PHY_AD_CAL_COMP_OUT_SHIFT; ++ phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret); ++ ++ return ret; ++} ++ ++static int rext_fill_result(struct phy_device *phydev, u16 *buf) ++{ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5, ++ MTK_PHY_RG_REXT_TRIM_MASK, buf[0] << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_BG_RASEL, ++ MTK_PHY_RG_BG_RASEL_MASK, buf[1]); ++ ++ return 0; ++} ++ ++static int rext_cal_efuse(struct phy_device *phydev, u32 *buf) ++{ ++ u16 rext_cal_val[2]; ++ ++ rext_cal_val[0] = EFS_RG_REXT_TRIM(buf[3]); ++ rext_cal_val[1] = EFS_RG_BG_RASEL(buf[3]); ++ rext_fill_result(phydev, rext_cal_val); ++ ++ return 0; ++} ++ ++static int tx_offset_fill_result(struct phy_device *phydev, u16 *buf) ++{ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B, ++ MTK_PHY_CR_TX_AMP_OFFSET_A_MASK, buf[0] << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B, ++ MTK_PHY_CR_TX_AMP_OFFSET_B_MASK, buf[1]); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D, ++ MTK_PHY_CR_TX_AMP_OFFSET_C_MASK, buf[2] << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D, ++ MTK_PHY_CR_TX_AMP_OFFSET_D_MASK, buf[3]); ++ ++ return 0; ++} ++ ++static int tx_offset_cal_efuse(struct phy_device *phydev, u32 *buf) ++{ ++ u16 tx_offset_cal_val[4]; ++ ++ tx_offset_cal_val[0] = EFS_DA_TX_AMP_OFFSET_A(buf[0]); ++ tx_offset_cal_val[1] = EFS_DA_TX_AMP_OFFSET_B(buf[1]); ++ tx_offset_cal_val[2] = EFS_DA_TX_AMP_OFFSET_C(buf[1]); ++ tx_offset_cal_val[3] = EFS_DA_TX_AMP_OFFSET_D(buf[1]); ++ ++ tx_offset_fill_result(phydev, tx_offset_cal_val); ++ ++ return 0; ++} ++ ++static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf) ++{ ++ int i; ++ int bias[16] = {}; ++ const int vals_9461[16] = { 7, 1, 4, 7, ++ 7, 1, 4, 7, ++ 7, 1, 4, 7, ++ 7, 1, 4, 7 }; ++ const int vals_9481[16] = { 10, 6, 6, 10, ++ 10, 6, 6, 10, ++ 10, 6, 6, 10, ++ 10, 6, 6, 10 }; ++ switch (phydev->drv->phy_id) { ++ case MTK_GPHY_ID_MT7981: ++ /* We add some calibration to efuse values ++ * due to board level influence. ++ * GBE: +7, TBT: +1, HBT: +4, TST: +7 ++ */ ++ memcpy(bias, (const void *)vals_9461, sizeof(bias)); ++ break; ++ case MTK_GPHY_ID_MT7988: ++ memcpy(bias, (const void *)vals_9481, sizeof(bias)); ++ break; ++ } ++ ++ /* Prevent overflow */ ++ for (i = 0; i < 12; i++) { ++ if (buf[i >> 2] + bias[i] > 63) { ++ buf[i >> 2] = 63; ++ bias[i] = 0; ++ } ++ } ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG, ++ MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG, ++ MTK_PHY_DA_TX_I2MPB_A_TBT_MASK, buf[0] + bias[1]); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2, ++ MTK_PHY_DA_TX_I2MPB_A_HBT_MASK, (buf[0] + bias[2]) << 10); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2, ++ MTK_PHY_DA_TX_I2MPB_A_TST_MASK, buf[0] + bias[3]); ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1, ++ MTK_PHY_DA_TX_I2MPB_B_GBE_MASK, (buf[1] + bias[4]) << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1, ++ MTK_PHY_DA_TX_I2MPB_B_TBT_MASK, buf[1] + bias[5]); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2, ++ MTK_PHY_DA_TX_I2MPB_B_HBT_MASK, (buf[1] + bias[6]) << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2, ++ MTK_PHY_DA_TX_I2MPB_B_TST_MASK, buf[1] + bias[7]); ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1, ++ MTK_PHY_DA_TX_I2MPB_C_GBE_MASK, (buf[2] + bias[8]) << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1, ++ MTK_PHY_DA_TX_I2MPB_C_TBT_MASK, buf[2] + bias[9]); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2, ++ MTK_PHY_DA_TX_I2MPB_C_HBT_MASK, (buf[2] + bias[10]) << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2, ++ MTK_PHY_DA_TX_I2MPB_C_TST_MASK, buf[2] + bias[11]); ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1, ++ MTK_PHY_DA_TX_I2MPB_D_GBE_MASK, (buf[3] + bias[12]) << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1, ++ MTK_PHY_DA_TX_I2MPB_D_TBT_MASK, buf[3] + bias[13]); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2, ++ MTK_PHY_DA_TX_I2MPB_D_HBT_MASK, (buf[3] + bias[14]) << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2, ++ MTK_PHY_DA_TX_I2MPB_D_TST_MASK, buf[3] + bias[15]); ++ ++ return 0; ++} ++ ++static int tx_amp_cal_efuse(struct phy_device *phydev, u32 *buf) ++{ ++ u16 tx_amp_cal_val[4]; ++ ++ tx_amp_cal_val[0] = EFS_DA_TX_I2MPB_A(buf[0]); ++ tx_amp_cal_val[1] = EFS_DA_TX_I2MPB_B(buf[0]); ++ tx_amp_cal_val[2] = EFS_DA_TX_I2MPB_C(buf[0]); ++ tx_amp_cal_val[3] = EFS_DA_TX_I2MPB_D(buf[0]); ++ tx_amp_fill_result(phydev, tx_amp_cal_val); ++ ++ return 0; ++} ++ ++static int tx_r50_fill_result(struct phy_device *phydev, u16 tx_r50_cal_val, ++ u8 txg_calen_x) ++{ ++ int bias = 0; ++ u16 reg, val; ++ ++ if (phydev->drv->phy_id == MTK_GPHY_ID_MT7988) ++ bias = -2; ++ ++ val = clamp_val(bias + tx_r50_cal_val, 0, 63); ++ ++ switch (txg_calen_x) { ++ case PAIR_A: ++ reg = MTK_PHY_DA_TX_R50_PAIR_A; ++ break; ++ case PAIR_B: ++ reg = MTK_PHY_DA_TX_R50_PAIR_B; ++ break; ++ case PAIR_C: ++ reg = MTK_PHY_DA_TX_R50_PAIR_C; ++ break; ++ case PAIR_D: ++ reg = MTK_PHY_DA_TX_R50_PAIR_D; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, val | val << 8); ++ ++ return 0; ++} ++ ++static int tx_r50_cal_efuse(struct phy_device *phydev, u32 *buf, ++ u8 txg_calen_x) ++{ ++ u16 tx_r50_cal_val; ++ ++ switch (txg_calen_x) { ++ case PAIR_A: ++ tx_r50_cal_val = EFS_DA_TX_R50_A(buf[1]); ++ break; ++ case PAIR_B: ++ tx_r50_cal_val = EFS_DA_TX_R50_B(buf[1]); ++ break; ++ case PAIR_C: ++ tx_r50_cal_val = EFS_DA_TX_R50_C(buf[2]); ++ break; ++ case PAIR_D: ++ tx_r50_cal_val = EFS_DA_TX_R50_D(buf[2]); ++ break; ++ default: ++ return -EINVAL; ++ } ++ tx_r50_fill_result(phydev, tx_r50_cal_val, txg_calen_x); ++ ++ return 0; ++} ++ ++static int tx_vcm_cal_sw(struct phy_device *phydev, u8 rg_txreserve_x) ++{ ++ u8 lower_idx, upper_idx, txreserve_val; ++ u8 lower_ret, upper_ret; ++ int ret; ++ ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, ++ MTK_PHY_RG_ANA_CALEN); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, ++ MTK_PHY_RG_CAL_CKINV); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1, ++ MTK_PHY_RG_TXVOS_CALEN); ++ ++ switch (rg_txreserve_x) { ++ case PAIR_A: ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN0_A, ++ MTK_PHY_DASN_DAC_IN0_A_MASK); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN1_A, ++ MTK_PHY_DASN_DAC_IN1_A_MASK); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_ANA_CAL_RG0, ++ MTK_PHY_RG_ZCALEN_A); ++ break; ++ case PAIR_B: ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN0_B, ++ MTK_PHY_DASN_DAC_IN0_B_MASK); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN1_B, ++ MTK_PHY_DASN_DAC_IN1_B_MASK); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_ANA_CAL_RG1, ++ MTK_PHY_RG_ZCALEN_B); ++ break; ++ case PAIR_C: ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN0_C, ++ MTK_PHY_DASN_DAC_IN0_C_MASK); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN1_C, ++ MTK_PHY_DASN_DAC_IN1_C_MASK); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_ANA_CAL_RG1, ++ MTK_PHY_RG_ZCALEN_C); ++ break; ++ case PAIR_D: ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN0_D, ++ MTK_PHY_DASN_DAC_IN0_D_MASK); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN1_D, ++ MTK_PHY_DASN_DAC_IN1_D_MASK); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_ANA_CAL_RG1, ++ MTK_PHY_RG_ZCALEN_D); ++ break; ++ default: ++ ret = -EINVAL; ++ goto restore; ++ } ++ ++ lower_idx = TXRESERVE_MIN; ++ upper_idx = TXRESERVE_MAX; ++ ++ phydev_dbg(phydev, "Start TX-VCM SW cal.\n"); ++ while ((upper_idx - lower_idx) > 1) { ++ txreserve_val = DIV_ROUND_CLOSEST(lower_idx + upper_idx, 2); ++ ret = cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9, ++ MTK_PHY_DA_RX_PSBN_TBT_MASK | ++ MTK_PHY_DA_RX_PSBN_HBT_MASK | ++ MTK_PHY_DA_RX_PSBN_GBE_MASK | ++ MTK_PHY_DA_RX_PSBN_LP_MASK, ++ txreserve_val << 12 | txreserve_val << 8 | ++ txreserve_val << 4 | txreserve_val); ++ if (ret == 1) { ++ upper_idx = txreserve_val; ++ upper_ret = ret; ++ } else if (ret == 0) { ++ lower_idx = txreserve_val; ++ lower_ret = ret; ++ } else { ++ goto restore; ++ } ++ } ++ ++ if (lower_idx == TXRESERVE_MIN) { ++ lower_ret = cal_cycle(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RXADC_CTRL_RG9, ++ MTK_PHY_DA_RX_PSBN_TBT_MASK | ++ MTK_PHY_DA_RX_PSBN_HBT_MASK | ++ MTK_PHY_DA_RX_PSBN_GBE_MASK | ++ MTK_PHY_DA_RX_PSBN_LP_MASK, ++ lower_idx << 12 | lower_idx << 8 | ++ lower_idx << 4 | lower_idx); ++ ret = lower_ret; ++ } else if (upper_idx == TXRESERVE_MAX) { ++ upper_ret = cal_cycle(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RXADC_CTRL_RG9, ++ MTK_PHY_DA_RX_PSBN_TBT_MASK | ++ MTK_PHY_DA_RX_PSBN_HBT_MASK | ++ MTK_PHY_DA_RX_PSBN_GBE_MASK | ++ MTK_PHY_DA_RX_PSBN_LP_MASK, ++ upper_idx << 12 | upper_idx << 8 | ++ upper_idx << 4 | upper_idx); ++ ret = upper_ret; ++ } ++ if (ret < 0) ++ goto restore; ++ ++ /* We calibrate TX-VCM in different logic. Check upper index and then ++ * lower index. If this calibration is valid, apply lower index's result. ++ */ ++ ret = upper_ret - lower_ret; ++ if (ret == 1) { ++ ret = 0; ++ /* Make sure we use upper_idx in our calibration system */ ++ cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9, ++ MTK_PHY_DA_RX_PSBN_TBT_MASK | ++ MTK_PHY_DA_RX_PSBN_HBT_MASK | ++ MTK_PHY_DA_RX_PSBN_GBE_MASK | ++ MTK_PHY_DA_RX_PSBN_LP_MASK, ++ upper_idx << 12 | upper_idx << 8 | ++ upper_idx << 4 | upper_idx); ++ phydev_dbg(phydev, "TX-VCM SW cal result: 0x%x\n", upper_idx); ++ } else if (lower_idx == TXRESERVE_MIN && upper_ret == 1 && ++ lower_ret == 1) { ++ ret = 0; ++ cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9, ++ MTK_PHY_DA_RX_PSBN_TBT_MASK | ++ MTK_PHY_DA_RX_PSBN_HBT_MASK | ++ MTK_PHY_DA_RX_PSBN_GBE_MASK | ++ MTK_PHY_DA_RX_PSBN_LP_MASK, ++ lower_idx << 12 | lower_idx << 8 | ++ lower_idx << 4 | lower_idx); ++ phydev_warn(phydev, "TX-VCM SW cal result at low margin 0x%x\n", ++ lower_idx); ++ } else if (upper_idx == TXRESERVE_MAX && upper_ret == 0 && ++ lower_ret == 0) { ++ ret = 0; ++ phydev_warn(phydev, "TX-VCM SW cal result at high margin 0x%x\n", ++ upper_idx); ++ } else { ++ ret = -EINVAL; ++ } ++ ++restore: ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, ++ MTK_PHY_RG_ANA_CALEN); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1, ++ MTK_PHY_RG_TXVOS_CALEN); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, ++ MTK_PHY_RG_ZCALEN_A); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1, ++ MTK_PHY_RG_ZCALEN_B | MTK_PHY_RG_ZCALEN_C | ++ MTK_PHY_RG_ZCALEN_D); ++ ++ return ret; ++} ++ ++static void mt798x_phy_common_finetune(struct phy_device *phydev) ++{ ++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); ++ /* EnabRandUpdTrig = 1 */ ++ __phy_write(phydev, 0x11, 0x2f00); ++ __phy_write(phydev, 0x12, 0xe); ++ __phy_write(phydev, 0x10, 0x8fb0); ++ ++ /* NormMseLoThresh = 85 */ ++ __phy_write(phydev, 0x11, 0x55a0); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x83aa); ++ ++ /* TrFreeze = 0 */ ++ __phy_write(phydev, 0x11, 0x0); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x9686); ++ ++ /* SSTrKp1000Slv = 5 */ ++ __phy_write(phydev, 0x11, 0xbaef); ++ __phy_write(phydev, 0x12, 0x2e); ++ __phy_write(phydev, 0x10, 0x968c); ++ ++ /* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2, ++ * MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2 ++ */ ++ __phy_write(phydev, 0x11, 0xd10a); ++ __phy_write(phydev, 0x12, 0x34); ++ __phy_write(phydev, 0x10, 0x8f82); ++ ++ /* VcoSlicerThreshBitsHigh */ ++ __phy_write(phydev, 0x11, 0x5555); ++ __phy_write(phydev, 0x12, 0x55); ++ __phy_write(phydev, 0x10, 0x8ec0); ++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); ++ ++ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9*/ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234, ++ MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK, ++ BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9)); ++ ++ /* rg_tr_lpf_cnt_val = 512 */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x200); ++ ++ /* IIR2 related */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_L, 0x82); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_U, 0x0); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_L, 0x103); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_U, 0x0); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_L, 0x82); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_U, 0x0); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_L, 0xd177); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_U, 0x3); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_L, 0x2c82); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_U, 0xe); ++ ++ /* FFE peaking */ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27C, ++ MTK_PHY_VGASTATE_FFE_THR_ST1_MASK, 0x1b << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27D, ++ MTK_PHY_VGASTATE_FFE_THR_ST2_MASK, 0x1e); ++ ++ /* Disable LDO pump */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRAB, 0x0); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRCD, 0x0); ++ /* Adjust LDO output voltage */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222); ++} ++ ++static void mt7981_phy_finetune(struct phy_device *phydev) ++{ ++ u16 val[8] = { 0x01ce, 0x01c1, ++ 0x020f, 0x0202, ++ 0x03d0, 0x03c0, ++ 0x0013, 0x0005 }; ++ int i, k; ++ ++ /* 100M eye finetune: ++ * Keep middle level of TX MLT3 shapper as default. ++ * Only change TX MLT3 overshoot level here. ++ */ ++ for (k = 0, i = 1; i < 12; i++) { ++ if (i % 3 == 0) ++ continue; ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]); ++ } ++ ++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); ++ /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */ ++ __phy_write(phydev, 0x11, 0xc71); ++ __phy_write(phydev, 0x12, 0xc); ++ __phy_write(phydev, 0x10, 0x8fae); ++ ++ /* ResetSyncOffset = 6 */ ++ __phy_write(phydev, 0x11, 0x600); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x8fc0); ++ ++ /* VgaDecRate = 1 */ ++ __phy_write(phydev, 0x11, 0x4c2a); ++ __phy_write(phydev, 0x12, 0x3e); ++ __phy_write(phydev, 0x10, 0x8fa4); ++ ++ /* FfeUpdGainForce = 4 */ ++ __phy_write(phydev, 0x11, 0x240); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x9680); ++ ++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); ++} ++ ++static void mt7988_phy_finetune(struct phy_device *phydev) ++{ ++ u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182, ++ 0x020d, 0x0206, 0x0384, 0x03d0, ++ 0x03c6, 0x030a, 0x0011, 0x0005 }; ++ int i; ++ ++ /* Set default MLT3 shaper first */ ++ for (i = 0; i < 12; i++) ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[i]); ++ ++ /* TCT finetune */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5); ++ ++ /* Disable TX power saving */ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7, ++ MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8); ++ ++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); ++ ++ /* SlvDSPreadyTime = 24, MasDSPreadyTime = 12 */ ++ __phy_write(phydev, 0x11, 0x671); ++ __phy_write(phydev, 0x12, 0xc); ++ __phy_write(phydev, 0x10, 0x8fae); ++ ++ /* ResetSyncOffset = 5 */ ++ __phy_write(phydev, 0x11, 0x500); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x8fc0); ++ ++ /* VgaDecRate is 1 at default on mt7988 */ ++ ++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); ++ ++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_2A30); ++ /* TxClkOffset = 2 */ ++ __phy_modify(phydev, MTK_PHY_ANARG_RG, MTK_PHY_TCLKOFFSET_MASK, ++ FIELD_PREP(MTK_PHY_TCLKOFFSET_MASK, 0x2)); ++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); ++} ++ ++static void mt798x_phy_eee(struct phy_device *phydev) ++{ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120, ++ MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK | ++ MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK, ++ FIELD_PREP(MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK, 0x0) | ++ FIELD_PREP(MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK, 0x14)); ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122, ++ MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, ++ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, ++ 0xff)); ++ ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_TESTMUX_ADC_CTRL, ++ MTK_PHY_RG_TXEN_DIG_MASK); ++ ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DEV1E_REG19b, MTK_PHY_BYPASS_DSP_LPI_READY); ++ ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DEV1E_REG234, MTK_PHY_TR_LP_IIR_EEE_EN); ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG238, ++ MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK | ++ MTK_PHY_LPI_SLV_SEND_TX_EN, ++ FIELD_PREP(MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK, 0x120)); ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239, ++ MTK_PHY_LPI_SEND_LOC_TIMER_MASK | ++ MTK_PHY_LPI_TXPCS_LOC_RCV, ++ FIELD_PREP(MTK_PHY_LPI_SEND_LOC_TIMER_MASK, 0x117)); ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2C7, ++ MTK_PHY_MAX_GAIN_MASK | MTK_PHY_MIN_GAIN_MASK, ++ FIELD_PREP(MTK_PHY_MAX_GAIN_MASK, 0x8) | ++ FIELD_PREP(MTK_PHY_MIN_GAIN_MASK, 0x13)); ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2D1, ++ MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK, ++ FIELD_PREP(MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK, ++ 0x33) | ++ MTK_PHY_LPI_SKIP_SD_SLV_TR | MTK_PHY_LPI_TR_READY | ++ MTK_PHY_LPI_VCO_EEE_STG0_EN); ++ ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG323, ++ MTK_PHY_EEE_WAKE_MAS_INT_DC | ++ MTK_PHY_EEE_WAKE_SLV_INT_DC); ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG324, ++ MTK_PHY_SMI_DETCNT_MAX_MASK, ++ FIELD_PREP(MTK_PHY_SMI_DETCNT_MAX_MASK, 0x3f) | ++ MTK_PHY_SMI_DET_MAX_EN); ++ ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG326, ++ MTK_PHY_LPI_MODE_SD_ON | MTK_PHY_RESET_RANDUPD_CNT | ++ MTK_PHY_TREC_UPDATE_ENAB_CLR | ++ MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF | ++ MTK_PHY_TR_READY_SKIP_AFE_WAKEUP); ++ ++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); ++ /* Regsigdet_sel_1000 = 0 */ ++ __phy_write(phydev, 0x11, 0xb); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x9690); ++ ++ /* REG_EEE_st2TrKf1000 = 3 */ ++ __phy_write(phydev, 0x11, 0x114f); ++ __phy_write(phydev, 0x12, 0x2); ++ __phy_write(phydev, 0x10, 0x969a); ++ ++ /* RegEEE_slv_wake_tr_timer_tar = 6, RegEEE_slv_remtx_timer_tar = 20 */ ++ __phy_write(phydev, 0x11, 0x3028); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x969e); ++ ++ /* RegEEE_slv_wake_int_timer_tar = 8 */ ++ __phy_write(phydev, 0x11, 0x5010); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x96a0); ++ ++ /* RegEEE_trfreeze_timer2 = 586 */ ++ __phy_write(phydev, 0x11, 0x24a); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x96a8); ++ ++ /* RegEEE100Stg1_tar = 16 */ ++ __phy_write(phydev, 0x11, 0x3210); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x96b8); ++ ++ /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 1 */ ++ __phy_write(phydev, 0x11, 0x1463); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x96ca); ++ ++ /* DfeTailEnableVgaThresh1000 = 27 */ ++ __phy_write(phydev, 0x11, 0x36); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x8f80); ++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); ++ ++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3); ++ __phy_modify(phydev, MTK_PHY_LPI_REG_14, MTK_PHY_LPI_WAKE_TIMER_1000_MASK, ++ FIELD_PREP(MTK_PHY_LPI_WAKE_TIMER_1000_MASK, 0x19c)); ++ ++ __phy_modify(phydev, MTK_PHY_LPI_REG_1c, MTK_PHY_SMI_DET_ON_THRESH_MASK, ++ FIELD_PREP(MTK_PHY_SMI_DET_ON_THRESH_MASK, 0xc)); ++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122, ++ MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, ++ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, 0xff)); ++} ++ ++static int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item, ++ u8 start_pair, u8 end_pair) ++{ ++ u8 pair_n; ++ int ret; ++ ++ for (pair_n = start_pair; pair_n <= end_pair; pair_n++) { ++ /* TX_OFFSET & TX_AMP have no SW calibration. */ ++ switch (cal_item) { ++ case TX_VCM: ++ ret = tx_vcm_cal_sw(phydev, pair_n); ++ break; ++ default: ++ return -EINVAL; ++ } ++ if (ret) ++ return ret; ++ } ++ return 0; ++} ++ ++static int cal_efuse(struct phy_device *phydev, enum CAL_ITEM cal_item, ++ u8 start_pair, u8 end_pair, u32 *buf) ++{ ++ u8 pair_n; ++ int ret; ++ ++ for (pair_n = start_pair; pair_n <= end_pair; pair_n++) { ++ /* TX_VCM has no efuse calibration. */ ++ switch (cal_item) { ++ case REXT: ++ ret = rext_cal_efuse(phydev, buf); ++ break; ++ case TX_OFFSET: ++ ret = tx_offset_cal_efuse(phydev, buf); ++ break; ++ case TX_AMP: ++ ret = tx_amp_cal_efuse(phydev, buf); ++ break; ++ case TX_R50: ++ ret = tx_r50_cal_efuse(phydev, buf, pair_n); ++ break; ++ default: ++ return -EINVAL; ++ } ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int start_cal(struct phy_device *phydev, enum CAL_ITEM cal_item, ++ enum CAL_MODE cal_mode, u8 start_pair, ++ u8 end_pair, u32 *buf) ++{ ++ int ret; ++ ++ switch (cal_mode) { ++ case EFUSE_M: ++ ret = cal_efuse(phydev, cal_item, start_pair, ++ end_pair, buf); ++ break; ++ case SW_M: ++ ret = cal_sw(phydev, cal_item, start_pair, end_pair); ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ if (ret) { ++ phydev_err(phydev, "cal %d failed\n", cal_item); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++static int mt798x_phy_calibration(struct phy_device *phydev) ++{ ++ int ret = 0; ++ u32 *buf; ++ size_t len; ++ struct nvmem_cell *cell; ++ ++ cell = nvmem_cell_get(&phydev->mdio.dev, "phy-cal-data"); ++ if (IS_ERR(cell)) { ++ if (PTR_ERR(cell) == -EPROBE_DEFER) ++ return PTR_ERR(cell); ++ return 0; ++ } ++ ++ buf = (u32 *)nvmem_cell_read(cell, &len); ++ if (IS_ERR(buf)) ++ return PTR_ERR(buf); ++ nvmem_cell_put(cell); ++ ++ if (!buf[0] || !buf[1] || !buf[2] || !buf[3] || len < 4 * sizeof(u32)) { ++ phydev_err(phydev, "invalid efuse data\n"); ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ ret = start_cal(phydev, REXT, EFUSE_M, NO_PAIR, NO_PAIR, buf); ++ if (ret) ++ goto out; ++ ret = start_cal(phydev, TX_OFFSET, EFUSE_M, NO_PAIR, NO_PAIR, buf); ++ if (ret) ++ goto out; ++ ret = start_cal(phydev, TX_AMP, EFUSE_M, NO_PAIR, NO_PAIR, buf); ++ if (ret) ++ goto out; ++ ret = start_cal(phydev, TX_R50, EFUSE_M, PAIR_A, PAIR_D, buf); ++ if (ret) ++ goto out; ++ ret = start_cal(phydev, TX_VCM, SW_M, PAIR_A, PAIR_A, buf); ++ if (ret) ++ goto out; ++ ++out: ++ kfree(buf); ++ return ret; ++} ++ ++static int mt798x_phy_config_init(struct phy_device *phydev) ++{ ++ switch (phydev->drv->phy_id) { ++ case MTK_GPHY_ID_MT7981: ++ mt7981_phy_finetune(phydev); ++ break; ++ case MTK_GPHY_ID_MT7988: ++ mt7988_phy_finetune(phydev); ++ break; ++ } ++ ++ mt798x_phy_common_finetune(phydev); ++ mt798x_phy_eee(phydev); ++ ++ return mt798x_phy_calibration(phydev); ++} ++ ++static struct phy_driver mtk_socphy_driver[] = { ++ { ++ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981), ++ .name = "MediaTek MT7981 PHY", ++ .config_init = mt798x_phy_config_init, ++ .config_intr = genphy_no_config_intr, ++ .handle_interrupt = genphy_handle_interrupt_no_ack, ++ .probe = mt798x_phy_calibration, ++ .suspend = genphy_suspend, ++ .resume = genphy_resume, ++ .read_page = mtk_socphy_read_page, ++ .write_page = mtk_socphy_write_page, ++ }, ++ { ++ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988), ++ .name = "MediaTek MT7988 PHY", ++ .config_init = mt798x_phy_config_init, ++ .config_intr = genphy_no_config_intr, ++ .handle_interrupt = genphy_handle_interrupt_no_ack, ++ .probe = mt798x_phy_calibration, ++ .suspend = genphy_suspend, ++ .resume = genphy_resume, ++ .read_page = mtk_socphy_read_page, ++ .write_page = mtk_socphy_write_page, ++ }, ++}; ++ ++module_phy_driver(mtk_socphy_driver); ++ ++static struct mdio_device_id __maybe_unused mtk_socphy_tbl[] = { ++ { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981) }, ++ { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988) }, ++ { } ++}; ++ ++MODULE_DESCRIPTION("MediaTek SoC Gigabit Ethernet PHY driver"); ++MODULE_AUTHOR("Daniel Golle "); ++MODULE_AUTHOR("SkyLake Huang "); ++MODULE_LICENSE("GPL"); ++ ++MODULE_DEVICE_TABLE(mdio, mtk_socphy_tbl); +--- a/drivers/net/phy/mediatek-ge.c ++++ b/drivers/net/phy/mediatek-ge.c +@@ -136,7 +136,8 @@ static struct phy_driver mtk_gephy_drive + module_phy_driver(mtk_gephy_driver); + + static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = { +- { PHY_ID_MATCH_VENDOR(0x03a29400) }, ++ { PHY_ID_MATCH_EXACT(0x03a29441) }, ++ { PHY_ID_MATCH_EXACT(0x03a29412) }, + { } + }; + diff --git a/target/linux/mediatek/patches-5.15/731-net-phy-mediatek-ge-soc-initialize-MT7988-PHY-LEDs-d.patch b/target/linux/mediatek/patches-5.15/731-net-phy-mediatek-ge-soc-initialize-MT7988-PHY-LEDs-d.patch new file mode 100644 index 0000000000..83d0f26bf4 --- /dev/null +++ b/target/linux/mediatek/patches-5.15/731-net-phy-mediatek-ge-soc-initialize-MT7988-PHY-LEDs-d.patch @@ -0,0 +1,213 @@ +From 5d2d78860f98eb5c03bc404eb024606878901ac8 Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Tue, 13 Jun 2023 03:27:14 +0100 +Subject: [PATCH] net: phy: mediatek-ge-soc: initialize MT7988 PHY LEDs default + state + +Initialize LEDs and set sane default values. +Read boottrap register and apply LED polarities accordingly to get +uniform behavior from all LEDs on MT7988. +Requires syscon phandle 'mediatek,pio' present in parenting MDIO bus +which should point to the syscon holding the boottrap register. + +Signed-off-by: Daniel Golle +--- + drivers/net/phy/mediatek-ge-soc.c | 144 ++++++++++++++++++++++++++++-- + 1 file changed, 136 insertions(+), 8 deletions(-) + +--- a/drivers/net/phy/mediatek-ge-soc.c ++++ b/drivers/net/phy/mediatek-ge-soc.c +@@ -1,11 +1,13 @@ + // SPDX-License-Identifier: GPL-2.0+ + #include ++#include + #include + #include + #include + #include + #include + #include ++#include + + #define MTK_GPHY_ID_MT7981 0x03a29461 + #define MTK_GPHY_ID_MT7988 0x03a29481 +@@ -208,9 +210,40 @@ + #define MTK_PHY_DA_TX_R50_PAIR_C 0x53f + #define MTK_PHY_DA_TX_R50_PAIR_D 0x540 + ++/* Registers on MDIO_MMD_VEND2 */ ++#define MTK_PHY_LED0_ON_CTRL 0x24 ++#define MTK_PHY_LED1_ON_CTRL 0x26 ++#define MTK_PHY_LED_ON_MASK GENMASK(6, 0) ++#define MTK_PHY_LED_ON_LINK1000 BIT(0) ++#define MTK_PHY_LED_ON_LINK100 BIT(1) ++#define MTK_PHY_LED_ON_LINK10 BIT(2) ++#define MTK_PHY_LED_ON_LINKDOWN BIT(3) ++#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */ ++#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */ ++#define MTK_PHY_LED_FORCE_ON BIT(6) ++#define MTK_PHY_LED_POLARITY BIT(14) ++#define MTK_PHY_LED_ENABLE BIT(15) ++ ++#define MTK_PHY_LED0_BLINK_CTRL 0x25 ++#define MTK_PHY_LED1_BLINK_CTRL 0x27 ++#define MTK_PHY_LED_1000TX BIT(0) ++#define MTK_PHY_LED_1000RX BIT(1) ++#define MTK_PHY_LED_100TX BIT(2) ++#define MTK_PHY_LED_100RX BIT(3) ++#define MTK_PHY_LED_10TX BIT(4) ++#define MTK_PHY_LED_10RX BIT(5) ++#define MTK_PHY_LED_COLLISION BIT(6) ++#define MTK_PHY_LED_RX_CRC_ERR BIT(7) ++#define MTK_PHY_LED_RX_IDLE_ERR BIT(8) ++#define MTK_PHY_LED_FORCE_BLINK BIT(9) ++ + #define MTK_PHY_RG_BG_RASEL 0x115 + #define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0) + ++/* Register in boottrap syscon defining the initial state of the 4 PHY LEDs */ ++#define RG_GPIO_MISC_TPBANK0 0x6f0 ++#define RG_GPIO_MISC_TPBANK0_BOOTMODE GENMASK(11, 8) ++ + /* These macro privides efuse parsing for internal phy. */ + #define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0)) + #define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0)) +@@ -238,13 +271,6 @@ enum { + PAIR_D, + }; + +-enum { +- GPHY_PORT0, +- GPHY_PORT1, +- GPHY_PORT2, +- GPHY_PORT3, +-}; +- + enum calibration_mode { + EFUSE_K, + SW_K +@@ -263,6 +289,10 @@ enum CAL_MODE { + SW_M + }; + ++struct mtk_socphy_shared { ++ u32 boottrap; ++}; ++ + static int mtk_socphy_read_page(struct phy_device *phydev) + { + return __phy_read(phydev, MTK_EXT_PAGE_ACCESS); +@@ -1073,6 +1103,104 @@ static int mt798x_phy_config_init(struct + return mt798x_phy_calibration(phydev); + } + ++static int mt798x_phy_setup_led(struct phy_device *phydev, bool inverted) ++{ ++ struct pinctrl *pinctrl; ++ const u16 led_on_ctrl_defaults = MTK_PHY_LED_ENABLE | ++ MTK_PHY_LED_ON_LINK1000 | ++ MTK_PHY_LED_ON_LINK100 | ++ MTK_PHY_LED_ON_LINK10; ++ const u16 led_blink_defaults = MTK_PHY_LED_1000TX | ++ MTK_PHY_LED_1000RX | ++ MTK_PHY_LED_100TX | ++ MTK_PHY_LED_100RX | ++ MTK_PHY_LED_10TX | ++ MTK_PHY_LED_10RX; ++ ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL, ++ led_on_ctrl_defaults ^ ++ (inverted ? MTK_PHY_LED_POLARITY : 0)); ++ ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL, ++ led_on_ctrl_defaults); ++ ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_BLINK_CTRL, ++ led_blink_defaults); ++ ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_BLINK_CTRL, ++ led_blink_defaults); ++ ++ pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led"); ++ if (IS_ERR(pinctrl)) ++ dev_err(&phydev->mdio.bus->dev, "Failed to setup PHY LED\n"); ++ ++ return 0; ++} ++ ++static int mt7988_phy_probe_shared(struct phy_device *phydev) ++{ ++ struct device_node *np = dev_of_node(&phydev->mdio.bus->dev); ++ struct mtk_socphy_shared *priv = phydev->shared->priv; ++ struct regmap *regmap; ++ u32 reg; ++ int ret; ++ ++ /* The LED0 of the 4 PHYs in MT7988 are wired to SoC pins LED_A, LED_B, ++ * LED_C and LED_D respectively. At the same time those pins are used to ++ * bootstrap configuration of the reference clock source (LED_A), ++ * DRAM DDRx16b x2/x1 (LED_B) and boot device (LED_C, LED_D). ++ * In practise this is done using a LED and a resistor pulling the pin ++ * either to GND or to VIO. ++ * The detected value at boot time is accessible at run-time using the ++ * TPBANK0 register located in the gpio base of the pinctrl, in order ++ * to read it here it needs to be referenced by a phandle called ++ * 'mediatek,pio' in the MDIO bus hosting the PHY. ++ * The 4 bits in TPBANK0 are kept as package shared data and are used to ++ * set LED polarity for each of the LED0. ++ */ ++ regmap = syscon_regmap_lookup_by_phandle(np, "mediatek,pio"); ++ if (IS_ERR(regmap)) ++ return PTR_ERR(regmap); ++ ++ ret = regmap_read(regmap, RG_GPIO_MISC_TPBANK0, ®); ++ if (ret) ++ return ret; ++ ++ priv->boottrap = FIELD_GET(RG_GPIO_MISC_TPBANK0_BOOTMODE, reg); ++ ++ return 0; ++} ++ ++static bool mt7988_phy_get_boottrap_polarity(struct phy_device *phydev) ++{ ++ struct mtk_socphy_shared *priv = phydev->shared->priv; ++ ++ if (priv->boottrap & BIT(phydev->mdio.addr)) ++ return false; ++ ++ return true; ++} ++ ++static int mt7988_phy_probe(struct phy_device *phydev) ++{ ++ int err; ++ ++ err = devm_phy_package_join(&phydev->mdio.dev, phydev, 0, ++ sizeof(struct mtk_socphy_shared)); ++ if (err) ++ return err; ++ ++ if (phy_package_probe_once(phydev)) { ++ err = mt7988_phy_probe_shared(phydev); ++ if (err) ++ return err; ++ } ++ ++ mt798x_phy_setup_led(phydev, mt7988_phy_get_boottrap_polarity(phydev)); ++ ++ return mt798x_phy_calibration(phydev); ++} ++ + static struct phy_driver mtk_socphy_driver[] = { + { + PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981), +@@ -1092,7 +1220,7 @@ static struct phy_driver mtk_socphy_driv + .config_init = mt798x_phy_config_init, + .config_intr = genphy_no_config_intr, + .handle_interrupt = genphy_handle_interrupt_no_ack, +- .probe = mt798x_phy_calibration, ++ .probe = mt7988_phy_probe, + .suspend = genphy_suspend, + .resume = genphy_resume, + .read_page = mtk_socphy_read_page,