From: Karl-Felix Glatzer <karl.glatzer@gmx.de>
Date: Wed, 12 Dec 2018 16:56:15 +0000 (+0100)
Subject: ath79: add support for TP-Link Archer A7
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9f939d982c6630f60a70c8eff1ba5f123968bddf;p=project%2Ffirmware-utils.git

ath79: add support for TP-Link Archer A7

This patch adds support for TP-Link Archer A7

Specification:
- SOC: QCA9563
- Flash: 16 MiB (SPI)
- RAM: 128 MiB (DDR2)
- Ethernet: 4x 1Gbps LAN + 1x 1Gbps WAN
- Wireless:
  - 2.4GHz (bgn) SoC internal
  - 5GHz (ac) QCA988x
- USB: 1x USB 2.0 port
- Button: 1x power, 1x reset, 1x wps
- LED: 10x LEDs
- UART: holes in PCB
  - Vcc, GND, RX, TX from ethernet port side
  - 115200n8

Flash instructions:

Upload openwrt-ath79-generic-tplink_archer-a7-v5-squashfs-factory.bin
via the Webinterface.

Flash instruction using tftp recovery:

1. Connect the computer to one of the LAN ports of the Archer A7
2. Set the computer IP to 192.168.0.66
3. Start a tftp server with the OpenWrt factory image in the tftp
   root directory renamed to ArcherC7v5_tp_recovery.bin
2. Connect power cable to Archer A7, press and hold the reset button
   and turn the router on
3. Keep the reset button pressed for ~5 seconds
4. Wait ~150 seconds to complete flashing

Changes since first revision:

  - Flash instructions using stock image webinterface
  - Changed "Version 5" in model string to "v5"
  - Split DTS file in qca9563_tplink_archer-x7-v5.dtsi
    and qca9563_tplink_archer-a7-v5.dts
  - Firmware image is now build with dynamic partitioning
  - Default to ath10k-ct

Changes since second revision:
  - Changed uboot@0 to uboot@20000 in DTS file
  - Fixed ordering issue in board led script
  - Specify firmware partition format in DTS file
  - Rebased Makefile device definition on common
    Device/tplink-safeloader-uimage definition
  - Merged switch section in network script
    (same configuration as tplink,tl-wdr3600
    and tplink,tl-wdr4300)

Signed-off-by: Karl-Felix Glatzer <karl.glatzer@gmx.de>
---

diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c
index 2959a21..358247e 100644
--- a/src/tplink-safeloader.c
+++ b/src/tplink-safeloader.c
@@ -357,6 +357,46 @@ static struct device_info boards[] = {
 		.last_sysupgrade_partition = "file-system"
 	},
 
+	/** Firmware layout for the A7-V5 */
+	{
+		.id = "ARCHER-A7-V5",
+		.support_list =
+			"SupportList:\n"
+			"{product_name:Archer A7,product_ver:5.0.0,special_id:45550000}\n"
+			"{product_name:Archer A7,product_ver:5.0.0,special_id:55530000}\n"
+			"{product_name:Archer A7,product_ver:5.0.0,special_id:43410000}\n"
+			"{product_name:Archer A7,product_ver:5.0.0,special_id:4A500000}\n"
+			"{product_name:Archer A7,product_ver:5.0.0,special_id:54570000}\n",
+		.support_trail = '\x00',
+		.soft_ver = "soft_ver:1.0.0\n",
+
+		/* We're using a dynamic kernel/rootfs split here */
+		.partitions = {
+			{"factory-boot", 0x00000, 0x20000},
+			{"fs-uboot", 0x20000, 0x20000},
+			{"firmware", 0x40000, 0xec0000},	/* Stock: name os-image base 0x40000 size 0x120000 */
+								/* Stock: name file-system base 0x160000 size 0xda0000 */
+			{"default-mac", 0xf40000, 0x00200},
+			{"pin", 0xf40200, 0x00200},
+			{"device-id", 0xf40400, 0x00100},
+			{"product-info", 0xf40500, 0x0fb00},
+			{"soft-version", 0xf50000, 0x00100},
+			{"extra-para", 0xf51000, 0x01000},
+			{"support-list", 0xf52000, 0x0a000},
+			{"profile", 0xf5c000, 0x04000},
+			{"default-config", 0xf60000, 0x10000},
+			{"user-config", 0xf70000, 0x40000},
+			{"certificate", 0xfb0000, 0x10000},
+			{"partition-table", 0xfc0000, 0x10000},
+			{"log", 0xfd0000, 0x20000},
+			{"radio", 0xff0000, 0x10000},
+			{NULL, 0, 0}
+		},
+
+		.first_sysupgrade_partition = "os-image",
+		.last_sysupgrade_partition = "file-system",
+	},
+
 	/** Firmware layout for the C25v1 */
 	{
 		.id = "ARCHER-C25-V1",
@@ -1581,7 +1621,7 @@ static void build_image(const char *output,
 	    strcasecmp(info->id, "TLWR1043NV5") == 0) {
 		const char mdat[11] = {0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00};
 		parts[5] = put_data("extra-para", mdat, 11);
-	} else if (strcasecmp(info->id, "ARCHER-C7-V4") == 0 || strcasecmp(info->id, "ARCHER-C7-V5") == 0) {
+	} else if (strcasecmp(info->id, "ARCHER-A7-V5") == 0 || strcasecmp(info->id, "ARCHER-C7-V4") == 0 || strcasecmp(info->id, "ARCHER-C7-V5") == 0) {
 		const char mdat[11] = {0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x01, 0x00, 0x00};
 		parts[5] = put_data("extra-para", mdat, 11);
 	}