From: Markus Stockhausen Date: Thu, 22 Aug 2024 06:01:30 +0000 (-0400) Subject: realtek: 6.6: set phylink supported_interfaces X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9f8570b0ddc4304cdfa3a1407640b9ae8392c719;p=openwrt%2Fstaging%2Fansuel.git realtek: 6.6: set phylink supported_interfaces The supported_interfaces bitmap cannot be empty since mainline kernel commit de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled"). Fix the dsa and ethernet driver accordingly. Signed-off-by: Markus Stockhausen --- diff --git a/target/linux/realtek/files-6.6/drivers/net/dsa/rtl83xx/dsa.c b/target/linux/realtek/files-6.6/drivers/net/dsa/rtl83xx/dsa.c index 0f14947fda..e32933ee91 100644 --- a/target/linux/realtek/files-6.6/drivers/net/dsa/rtl83xx/dsa.c +++ b/target/linux/realtek/files-6.6/drivers/net/dsa/rtl83xx/dsa.c @@ -652,6 +652,21 @@ static void rtl83xx_config_interface(int port, phy_interface_t interface) pr_debug("configured port %d for interface %s\n", port, phy_modes(interface)); } +static void rtl83xx_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ +/* + * This capability check will need some love. Depending on the model and the port + * different link modes are supported. For now just enable all required values + * so that we can make use of the ports. + */ + __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_QSGMII, config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_SGMII, config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_1000BASEX, config->supported_interfaces); +} + static void rtl83xx_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, const struct phylink_link_state *state) @@ -2170,6 +2185,7 @@ const struct dsa_switch_ops rtl83xx_switch_ops = { .phy_read = dsa_phy_read, .phy_write = dsa_phy_write, + .phylink_get_caps = rtl83xx_phylink_get_caps, .phylink_mac_config = rtl83xx_phylink_mac_config, .phylink_mac_link_down = rtl83xx_phylink_mac_link_down, .phylink_mac_link_up = rtl83xx_phylink_mac_link_up, @@ -2227,6 +2243,7 @@ const struct dsa_switch_ops rtl930x_switch_ops = { .phy_read = dsa_phy_read, .phy_write = dsa_phy_write, + .phylink_get_caps = rtl83xx_phylink_get_caps, .phylink_mac_config = rtl93xx_phylink_mac_config, .phylink_mac_link_down = rtl93xx_phylink_mac_link_down, .phylink_mac_link_up = rtl93xx_phylink_mac_link_up, diff --git a/target/linux/realtek/files-6.6/drivers/net/ethernet/rtl838x_eth.c b/target/linux/realtek/files-6.6/drivers/net/ethernet/rtl838x_eth.c index 15f5ce933e..4439059345 100644 --- a/target/linux/realtek/files-6.6/drivers/net/ethernet/rtl838x_eth.c +++ b/target/linux/realtek/files-6.6/drivers/net/ethernet/rtl838x_eth.c @@ -2642,6 +2642,7 @@ static int __init rtl838x_eth_probe(struct platform_device *pdev) priv->pcs.ops = &rtl838x_pcs_ops; priv->phylink_config.dev = &dev->dev; priv->phylink_config.type = PHYLINK_NETDEV; + __set_bit(PHY_INTERFACE_MODE_INTERNAL, priv->phylink_config.supported_interfaces); phylink = phylink_create(&priv->phylink_config, pdev->dev.fwnode, phy_mode, &rtl838x_phylink_ops);