From: Gabor Juhos <juhosg@openwrt.org>
Date: Fri, 10 Dec 2010 19:55:28 +0000 (+0000)
Subject: ar71xx: add missing files for the JA76PF board
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9f38f9bf76bad22b8e81c7e21c4b438c2aae278d;p=openwrt%2Fstaging%2Fdangole.git

ar71xx: add missing files for the JA76PF board

SVN-Revision: 24444
---

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/ja76pf/network b/target/linux/ar71xx/base-files/etc/defconfig/ja76pf/network
new file mode 100644
index 0000000000..b60053f019
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/defconfig/ja76pf/network
@@ -0,0 +1,26 @@
+config interface loopback
+	option ifname	lo
+	option proto	static
+	option ipaddr	127.0.0.1
+	option netmask	255.0.0.0
+
+config interface lan
+	option ifname	eth0
+	option type	bridge
+	option proto	static
+	option ipaddr	192.168.1.1
+	option netmask	255.255.255.0
+
+config interface wan
+	option ifname	eth1
+	option proto	dhcp
+
+config switch
+	option name	eth0
+	option reset	1
+	option enable_vlan	1
+
+config switch_vlan
+	option device	eth0
+	option vlan	1
+	option ports	"0 1 2 3 4"
diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ja76pf.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ja76pf.c
new file mode 100644
index 0000000000..d39de3c4d0
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ja76pf.c
@@ -0,0 +1,96 @@
+/*
+ *  jjPlus JA76PF board support
+ */
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-pb42-pci.h"
+#include "dev-usb.h"
+#include "dev-leds-gpio.h"
+
+#define JA76PF_BUTTONS_POLL_INTERVAL	20
+
+#define JA76PF_GPIO_I2C_SCL		0
+#define JA76PF_GPIO_I2C_SDA		1
+#define JA76PF_GPIO_LED_1		5
+#define JA76PF_GPIO_LED_2		4
+#define JA76PF_GPIO_BTN_RESET		11
+
+static struct gpio_led ja76pf_leds_gpio[] __initdata = {
+	{
+		.name		= "ja76pf:green:led1",
+		.gpio		= JA76PF_GPIO_LED_1,
+		.active_low	= 1,
+	}, {
+		.name		= "ja76pf:green:led2",
+		.gpio		= JA76PF_GPIO_LED_2,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_button ja76pf_gpio_buttons[] __initdata = {
+	{
+		.desc		= "reset",
+		.type		= EV_KEY,
+		.code		= KEY_RESTART,
+		.threshold	= 3,
+		.gpio		= JA76PF_GPIO_BTN_RESET,
+		.active_low	= 1,
+	}
+};
+
+static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = {
+	.sda_pin	= JA76PF_GPIO_I2C_SDA,
+	.scl_pin	= JA76PF_GPIO_I2C_SCL,
+};
+
+static struct platform_device ja76pf_i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev = {
+		.platform_data  = &ja76pf_i2c_gpio_data,
+	}
+};
+
+#define JA76PF_WAN_PHYMASK	(1 << 4)
+#define JA76PF_LAN_PHYMASK	((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3))
+#define JA76PF_MDIO_PHYMASK	(JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK)
+
+static void __init ja76pf_init(void)
+{
+	ar71xx_add_device_m25p80(NULL);
+
+	ar71xx_add_device_mdio(~JA76PF_MDIO_PHYMASK);
+
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth0_data.phy_mask = JA76PF_LAN_PHYMASK;
+
+	ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth1_data.phy_mask = JA76PF_WAN_PHYMASK;
+	ar71xx_eth1_data.speed = SPEED_1000;
+	ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+	ar71xx_add_device_eth(0);
+	ar71xx_add_device_eth(1);
+
+	platform_device_register(&ja76pf_i2c_gpio_device);
+
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio),
+					ja76pf_leds_gpio);
+
+	ar71xx_add_device_gpio_buttons(-1, JA76PF_BUTTONS_POLL_INTERVAL,
+					ARRAY_SIZE(ja76pf_gpio_buttons),
+					ja76pf_gpio_buttons);
+
+	ar71xx_add_device_usb();
+	pb42_pci_init();
+}
+
+MIPS_MACHINE(AR71XX_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init);