From: John Crispin Date: Fri, 11 Dec 2015 15:04:13 +0000 (+0000) Subject: ramips: add additional support for MQmaker WiTi board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9f14006809f6122d68e22394d147e6fe4a47e676;p=openwrt%2Fstaging%2Fkaloz.git ramips: add additional support for MQmaker WiTi board The board is based on mt7621AT cpu, and has 16mb nor flash, 256mb of ram, 2 sata ports, microsd card slot, 1 USB 3.0 port and at least one 2.4 and one 5 ghz antenna. This is the 6th submission that adds support for XHCI in the device tree file, along with switching the location of the 2 radio's and addition of the kmod-i2c-mt7621 in the default packages of the profile. Signed-off-by: Sebastian Careba SVN-Revision: 47845 --- diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index aee0e724e3..dce6002e12 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -78,6 +78,7 @@ ramips_setup_interfaces() wf-2881|\ whr-300hp2|\ whr-600d|\ + witi|\ wsr-1166|\ wsr-600|\ wt1520|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 3940a54845..3e8a33186f 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -162,6 +162,7 @@ get_status_led() { status_led="$board:green:security" ;; w306r-v20|\ + witi|\ zbt-wr8305rt) status_led="$board:green:sys" ;; diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 92e13c034f..c002b975d7 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -391,6 +391,9 @@ ramips_board_detect() { *"WHR-G300N") name="whr-g300n" ;; + *"WiTi") + name="witi" + ;; *"WIZARD 8800") name="wizard8800" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index 073593ad38..4ec3008b3e 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -113,6 +113,7 @@ platform_check_image() { whr-300hp2|\ whr-600d|\ whr-g300n|\ + witi|\ wizfi630a|\ wl-330n|\ wl-330n3g|\ diff --git a/target/linux/ramips/dts/WITI.dts b/target/linux/ramips/dts/WITI.dts new file mode 100644 index 0000000000..9b031474a3 --- /dev/null +++ b/target/linux/ramips/dts/WITI.dts @@ -0,0 +1,146 @@ +/dts-v1/; + +#include "mt7621.dtsi" + +/ { + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc"; + model = "MQmaker WiTi"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + sdhci@10130000 { + status = "okay"; + }; + + xhci@1E1C0000 { + status = "okay"; + }; + + palmbus@1E000000 { + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0 0>; + linux,modalias = "m25p80"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; + + i2c@900 { + compatible = "ralink,i2c-mt7621"; + reg = <0x900 0x100>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + status = "okay"; + + pcf8563: rtc@51 { + status = "okay"; + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + }; + + pcie@1e140000 { + status = "okay"; + + pcie0 { + mt76@0,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x8000>; + mediatek,2ghz = <0>; + }; + }; + + pcie1 { + mt76@1,0 { + reg = <0x0000 0 0 0 0>; + device_type = "pci"; + mediatek,mtd-eeprom = <&factory 0x0000>; + mediatek,5ghz = <0>; + }; + }; + }; + + ethernet@1e100000 { + mtd-mac-address = <&factory 0xe000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "witi:green:power"; + gpios = <&gpio0 25 1>; + }; + + sys { + label = "witi:green:sys"; + gpios = <&gpio0 24 1>; + }; + + internet { + label = "witi:green:internet"; + gpios = <&gpio0 23 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 18 1>; + linux,code = <0x198>; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "wdt", "rgmii2", "jtag", "mdio"; + ralink,function = "gpio"; + }; + }; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 01e3fcbf11..63d6222223 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -954,7 +954,7 @@ endif # ifeq ($(SUBTARGET),mt7621) - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 zbt-wg2626 wf-2881 + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 witi wf-2881 zbt-wg2626 endif define Device/mt7621 @@ -1004,6 +1004,11 @@ define Device/sap-g3200u3 DTS := SAP-G3200U3 endef +define Device/witi + DTS := WITI + IMAGE_SIZE := $(ralink_default_fw_size_16M) +endef + define Device/zbt-wg2626 DTS := ZBT-WG2626 IMAGE_SIZE := $(ralink_default_fw_size_16M) diff --git a/target/linux/ramips/mt7621/profiles/mqmaker.mk b/target/linux/ramips/mt7621/profiles/mqmaker.mk new file mode 100644 index 0000000000..ae35e7dc66 --- /dev/null +++ b/target/linux/ramips/mt7621/profiles/mqmaker.mk @@ -0,0 +1,20 @@ +# +# Copyright (C) 2015 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/witi + NAME:=MQmaker WiTi + FEATURES+=rtc + PACKAGES:=\ + kmod-usb-core kmod-usb3 kmod-usb-hid kmod-sdhci-mt7620 \ + kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci \ + kmod-rtc-pcf8563 kmod-i2c-mt7621 +endef + +define Profile/witi/Description + Package set compatible with MQmaker WiTi board. +endef +$(eval $(call Profile,witi))