From: John Crispin <john@openwrt.org>
Date: Fri, 1 Aug 2014 11:19:50 +0000 (+0000)
Subject: ramips: add support for easyacc wizard8800
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9efd7ebd346862f32acb7ee782e90aa9eaab2268;p=openwrt%2Fstaging%2Fdedeckeh.git

ramips: add support for easyacc wizard8800

Signed-off-by: Sebastian Wendel <s.wendel@sourceindex.de>

SVN-Revision: 41936
---

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network
index 40c60fee5c..da7600c2c4 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network
@@ -55,6 +55,7 @@ ramips_setup_interfaces()
                 ucidef_set_interface_lan "eth0.2"
                 ;;
 
+	wizard8800 | \
 	wl-330n | \
 	wmr300)
 		ucidef_set_interface_lan "eth0.1"
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index f7e04b7391..d188dd7bde 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -121,6 +121,9 @@ ramips_board_detect() {
 	*"ESR-9753")
 		name="esr-9753"
 		;;
+	*"EASYACC WI-STOR WIZARD 8800")
+		name="wizard8800"
+		;;
 	*"Edimax BR-6475nD")
 		name="br-6475nd"
 		;;
diff --git a/target/linux/ramips/dts/WIZARD8800.dts b/target/linux/ramips/dts/WIZARD8800.dts
new file mode 100644
index 0000000000..a80b9375ca
--- /dev/null
+++ b/target/linux/ramips/dts/WIZARD8800.dts
@@ -0,0 +1,82 @@
+/dts-v1/;
+
+/include/ "rt5350.dtsi"
+
+/ {
+	compatible = "WIZARD8800", "ralink,rt5350-soc";
+	model = "EASYACC WI-STOR WIZARD 8800";
+
+	palmbus@10000000 {
+		gpio1@638 {
+			status = "okay";
+		};
+
+		gpio2@660 {
+			status = "okay";
+		};
+
+		spi@b00 {
+			status = "okay";
+			m25p80@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "w25q32";
+				reg = <0 0>;
+				linux,modalias = "m25p80", "w25q32";
+				spi-max-frequency = <10000000>;
+
+				partition@0 {
+					label = "u-boot";
+					reg = <0x0 0x30000>;
+					read-only;
+				};
+
+				partition@30000 {
+					label = "u-boot-env";
+					reg = <0x30000 0x10000>;
+					read-only;
+				};
+
+				factory: partition@40000 {
+					label = "factory";
+					reg = <0x40000 0x10000>;
+					read-only;
+				};
+
+				partition@50000 {
+					label = "firmware";
+					reg = <0x50000 0x7b0000>;
+				};
+			};
+		};
+	};
+
+	pinctrl {
+		state_default: pinctrl0 {
+			gpio {
+				ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
+				ralink,function = "gpio";
+			};
+		};
+	};
+
+	ethernet@10100000 {
+		mtd-mac-address = <&factory 0x4>;
+	};
+
+	esw@10110000 {
+		ralink,portmap = <0x2f>;
+	};
+
+	ehci@101c0000 {
+		status = "okay";
+	};
+
+	ohci@101c1000 {
+		status = "okay";
+	};
+
+	wmac@10180000 {
+		ralink,mtd-eeprom = <&factory 0>;
+	};
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 62992cd607..c8f1a433d9 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -499,6 +499,8 @@ endef
 BuildFirmware/WHRG300N/initramfs=$(call BuildFirmware/OF/initramfs,$(1),whr-g300n,WHR-G300N)
 Image/Build/Profile/WHRG300N=$(call BuildFirmware/WHRG300N/$(1),$(1))
 
+Image/Build/Profile/WIZARD8800=$(call BuildFirmware/Default8M/$(1),$(1),wizard-8800,WIZARD8800,Linux Kernel Image)
+
 Image/Build/Profile/WL_330N=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n,WL_330N)
 
 Image/Build/Profile/WL_330N3G=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n3g,WL_330N3G)
@@ -617,6 +619,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/W502U,$(1))
 	$(call Image/Build/Profile/WCR150GN,$(1))
 	$(call Image/Build/Profile/WHRG300N,$(1))
+	$(call Image/Build/Profile/WIZARD8800,$(1))
 	$(call Image/Build/Profile/WL_330N,$(1))
 	$(call Image/Build/Profile/WL_330N3G,$(1))
 	$(call Image/Build/Profile/WL341V3,$(1))