From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Mon, 10 Feb 2014 22:20:30 +0000 (-0700)
Subject: staging: comedi: usbduxfast: remove TRIG_TIMER from scan_begin_src
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9ebe26cf7acf40391afb6caa4d38bb9cc83a27f0;p=openwrt%2Fstaging%2Fblogic.git

staging: comedi: usbduxfast: remove TRIG_TIMER from scan_begin_src

Currently the (*do_cmdtest) indicates that TRIG_TIMER is a valid scan_begin_src
but later this source is tested as -EINVAL. To simplify the code a bit just
remove the TRIG_TIMER source.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/usbduxfast.c b/drivers/staging/comedi/drivers/usbduxfast.c
index 4a927e44cb0a..d6fae11ee4e0 100644
--- a/drivers/staging/comedi/drivers/usbduxfast.c
+++ b/drivers/staging/comedi/drivers/usbduxfast.c
@@ -372,7 +372,7 @@ static int usbduxfast_ai_cmdtest(struct comedi_device *dev,
 	err |= cfc_check_trigger_src(&cmd->start_src,
 					TRIG_NOW | TRIG_EXT | TRIG_INT);
 	err |= cfc_check_trigger_src(&cmd->scan_begin_src,
-					TRIG_TIMER | TRIG_FOLLOW | TRIG_EXT);
+					TRIG_FOLLOW | TRIG_EXT);
 	err |= cfc_check_trigger_src(&cmd->convert_src, TRIG_TIMER | TRIG_EXT);
 	err |= cfc_check_trigger_src(&cmd->scan_end_src, TRIG_COUNT);
 	err |= cfc_check_trigger_src(&cmd->stop_src, TRIG_COUNT | TRIG_NONE);
@@ -424,9 +424,6 @@ static int usbduxfast_ai_cmdtest(struct comedi_device *dev,
 		err |= cfc_check_trigger_arg_is(&cmd->convert_arg, tmp);
 	}
 
-	if (cmd->scan_begin_src == TRIG_TIMER)
-		err |= -EINVAL;
-
 	/* stop source */
 	switch (cmd->stop_src) {
 	case TRIG_COUNT:
@@ -536,12 +533,6 @@ static int usbduxfast_ai_cmd(struct comedi_device *dev,
 		}
 	}
 	steps = 0;
-	if (cmd->scan_begin_src == TRIG_TIMER) {
-		dev_err(dev->class_dev,
-			"scan_begin_src==TRIG_TIMER not valid\n");
-		up(&devpriv->sem);
-		return -EINVAL;
-	}
 	if (cmd->convert_src == TRIG_TIMER)
 		steps = (cmd->convert_arg * 30) / 1000;