From: Shiji Yang Date: Mon, 29 Apr 2024 15:09:24 +0000 (+0000) Subject: kernel: bump 6.1 to 6.1.89 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9e86e0b33bfa1a81cfc92647def72f151da2e5b7;p=openwrt%2Fstaging%2Fthess.git kernel: bump 6.1 to 6.1.89 Changelogs: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.67 https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.68 https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.69 Upstreamed patches: target/linux/generic/backport-6.1/740-v6.9-01-netfilter-flowtable-validate-pppoe-header.patch [1] target/linux/generic/backport-6.1/740-v6.9-02-netfilter-flowtable-incorrect-pppoe-tuple.patch [2] target/linux/generic/backport-6.1/790-48-STABLE-net-dsa-mt7530-trap-link-local-frames-regardless-of-.patch [3] target/linux/generic/backport-6.1/790-50-v6.10-net-dsa-mt7530-fix-mirroring-frames-received-on-loca.patch [4] target/linux/generic/backport-6.1/790-16-v6.4-net-dsa-mt7530-set-all-CPU-ports-in-MT7531_CPU_PMAP.patch [5] target/linux/generic/backport-6.1/790-46-v6.9-net-dsa-mt7530-fix-improper-frames-on-all-25MHz-and-.patch [6] target/linux/generic/backport-6.1/790-47-v6.10-net-dsa-mt7530-fix-enabling-EEE-on-MT7531-switch-on-.patch [7] target/linux/mediatek/patches-6.1/220-v6.3-clk-mediatek-clk-gate-Propagate-struct-device-with-m.patch [8] target/linux/mediatek/patches-6.1/222-v6.3-clk-mediatek-clk-mtk-Propagate-struct-device-for-com.patch [9] target/linux/mediatek/patches-6.1/223-v6.3-clk-mediatek-clk-mux-Propagate-struct-device-for-mtk.patch [10] target/linux/mediatek/patches-6.1/226-v6.3-clk-mediatek-clk-mtk-Extend-mtk_clk_simple_probe.patch [11] Symbol changes: MITIGATION_SPECTRE_BHI (new) [12] SPECTRE_BHI_{ON,OFF} (deprecated) [12] References: [1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=8bf7c76a2a207ca2b4cfda0a279192adf27678d7 [2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=f1c3c61701a0b12f4906152c1626a5de580ea3d2 [3] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=19643bf8c9b5bb5eea5163bf2f6a3eee6fb5b99b [4] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=e86c9db58eba290e858e2bb80efcde9e3973a5ef [5] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=013c787d231188a6408e2991150d3c9bf9a2aa0b [6] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=41a004ffba9b1fd8a5a7128ebd0dfa3ed39c3316 [7] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=7d51db455ca03e5270cc585a75a674abd063fa6c [8] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=082b831488a41257b7ac7ffa1d80a0b60d98394d [9] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=6f5f72a684a2823f21efbfd20c7e4b528c44a781 [10] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=a4fe8813a7868ba5867e42e60de7a2b8baac30ff [11] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=c1d87d56af063c87961511ee25f6b07a5676d27d [12] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.89&id=d844df110084ef8bd950a52194865f3f63b561ca Signed-off-by: Shiji Yang --- diff --git a/include/kernel-6.1 b/include/kernel-6.1 index 7760c440af..6717917ac1 100644 --- a/include/kernel-6.1 +++ b/include/kernel-6.1 @@ -1,2 +1,2 @@ -LINUX_VERSION-6.1 = .86 -LINUX_KERNEL_HASH-6.1.86 = d3d3c8c44f0f0a870a95bd2823f9d91979d1aa6f266da5d8cccd0c4b15e3115b +LINUX_VERSION-6.1 = .89 +LINUX_KERNEL_HASH-6.1.89 = 12bab8e092618d1d4eeaf4201e6e70054c94896198956bd84ff0e908b0264719 diff --git a/target/linux/bcm27xx/patches-6.1/950-0106-Add-dwc_otg-driver.patch b/target/linux/bcm27xx/patches-6.1/950-0106-Add-dwc_otg-driver.patch index ab145eb66f..600fe08126 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0106-Add-dwc_otg-driver.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0106-Add-dwc_otg-driver.patch @@ -1185,7 +1185,7 @@ Signed-off-by: Jonathan Bell } --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c -@@ -5686,7 +5686,7 @@ static void port_event(struct usb_hub *h +@@ -5697,7 +5697,7 @@ static void port_event(struct usb_hub *h port_dev->over_current_count++; port_over_current_notify(port_dev); diff --git a/target/linux/bcm27xx/patches-6.1/950-0181-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch b/target/linux/bcm27xx/patches-6.1/950-0181-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch index 34b923fb23..3feabeaf9d 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0181-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0181-usb-add-plumbing-for-updating-interrupt-endpoint-int.patch @@ -90,10 +90,10 @@ Signed-off-by: Jonathan Bell + */ + void (*fixup_endpoint)(struct usb_hcd *hcd, struct usb_device *udev, + struct usb_host_endpoint *ep, int interval); - /* Returns the hardware-chosen device address */ - int (*address_device)(struct usb_hcd *, struct usb_device *udev); - /* prepares the hardware to send commands to the device */ -@@ -435,6 +440,8 @@ extern void usb_hcd_unmap_urb_setup_for_ + /* Set the hardware-chosen device address */ + int (*address_device)(struct usb_hcd *, struct usb_device *udev, + unsigned int timeout_ms); +@@ -436,6 +441,8 @@ extern void usb_hcd_unmap_urb_setup_for_ extern void usb_hcd_unmap_urb_for_dma(struct usb_hcd *, struct urb *); extern void usb_hcd_flush_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); diff --git a/target/linux/bcm27xx/patches-6.1/950-0182-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch b/target/linux/bcm27xx/patches-6.1/950-0182-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch index 3c1e41ba0a..a5e08d4cca 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0182-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0182-xhci-implement-xhci_fixup_endpoint-for-interval-adju.patch @@ -125,7 +125,7 @@ Signed-off-by: Jonathan Bell * non-error returns are a promise to giveback() the urb later * we drop ownership so next owner (or urb unlink) can get it */ -@@ -5471,6 +5574,7 @@ static const struct hc_driver xhci_hc_dr +@@ -5480,6 +5583,7 @@ static const struct hc_driver xhci_hc_dr .endpoint_reset = xhci_endpoint_reset, .check_bandwidth = xhci_check_bandwidth, .reset_bandwidth = xhci_reset_bandwidth, diff --git a/target/linux/bcm27xx/patches-6.1/950-0190-xhci-Use-more-event-ring-segment-table-entries.patch b/target/linux/bcm27xx/patches-6.1/950-0190-xhci-Use-more-event-ring-segment-table-entries.patch index 93f7ffde9c..1188b4dbe4 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0190-xhci-Use-more-event-ring-segment-table-entries.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0190-xhci-Use-more-event-ring-segment-table-entries.patch @@ -22,7 +22,7 @@ Signed-off-by: Jonathan Bell --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c -@@ -2522,9 +2522,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, +@@ -2524,9 +2524,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, * Event ring setup: Allocate a normal ring, but also setup * the event ring segment table (ERST). Section 4.9.3. */ @@ -36,7 +36,7 @@ Signed-off-by: Jonathan Bell if (!xhci->event_ring) goto fail; if (xhci_check_trb_in_td_math(xhci) < 0) -@@ -2537,7 +2539,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, +@@ -2539,7 +2541,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, /* set ERST count with the number of entries in the segment table */ val = readl(&xhci->ir_set->erst_size); val &= ERST_SIZE_MASK; @@ -47,7 +47,7 @@ Signed-off-by: Jonathan Bell val); --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1672,8 +1672,8 @@ struct urb_priv { +@@ -1677,8 +1677,8 @@ struct urb_priv { * Each segment table entry is 4*32bits long. 1K seems like an ok size: * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table, * meaning 64 ring segments. diff --git a/target/linux/bcm27xx/patches-6.1/950-0327-usb-xhci-workaround-for-bogus-SET_DEQ_PENDING-endpoi.patch b/target/linux/bcm27xx/patches-6.1/950-0327-usb-xhci-workaround-for-bogus-SET_DEQ_PENDING-endpoi.patch index db15c65809..ed242cbbe4 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0327-usb-xhci-workaround-for-bogus-SET_DEQ_PENDING-endpoi.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0327-usb-xhci-workaround-for-bogus-SET_DEQ_PENDING-endpoi.patch @@ -26,7 +26,7 @@ Signed-off-by: Jonathan Bell --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c -@@ -674,9 +674,9 @@ deq_found: +@@ -675,9 +675,9 @@ deq_found: } if ((ep->ep_state & SET_DEQ_PENDING)) { diff --git a/target/linux/bcm27xx/patches-6.1/950-0359-xhci-quirks-add-link-TRB-quirk-for-VL805.patch b/target/linux/bcm27xx/patches-6.1/950-0359-xhci-quirks-add-link-TRB-quirk-for-VL805.patch index 073bb8be79..0725689bf8 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0359-xhci-quirks-add-link-TRB-quirk-for-VL805.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0359-xhci-quirks-add-link-TRB-quirk-for-VL805.patch @@ -36,7 +36,7 @@ Signed-off-by: Jonathan Bell pdev->device == PCI_DEVICE_ID_ASMEDIA_1042_XHCI) { --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c -@@ -664,6 +664,15 @@ static int xhci_move_dequeue_past_td(str +@@ -665,6 +665,15 @@ static int xhci_move_dequeue_past_td(str } while (!cycle_found || !td_last_trb_found); deq_found: @@ -54,7 +54,7 @@ Signed-off-by: Jonathan Bell addr = xhci_trb_virt_to_dma(new_seg, new_deq); --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1902,6 +1902,7 @@ struct xhci_hcd { +@@ -1907,6 +1907,7 @@ struct xhci_hcd { #define XHCI_RESET_TO_DEFAULT BIT_ULL(44) #define XHCI_ZHAOXIN_TRB_FETCH BIT_ULL(45) #define XHCI_ZHAOXIN_HOST BIT_ULL(46) diff --git a/target/linux/bcm27xx/patches-6.1/950-0361-xhci-refactor-out-TRBS_PER_SEGMENT-define-in-runtime.patch b/target/linux/bcm27xx/patches-6.1/950-0361-xhci-refactor-out-TRBS_PER_SEGMENT-define-in-runtime.patch index ab76ad76cd..4147167600 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0361-xhci-refactor-out-TRBS_PER_SEGMENT-define-in-runtime.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0361-xhci-refactor-out-TRBS_PER_SEGMENT-define-in-runtime.patch @@ -144,7 +144,7 @@ Signed-off-by: Jonathan Bell if (ret) return -ENOMEM; -@@ -1811,7 +1815,7 @@ int xhci_alloc_erst(struct xhci_hcd *xhc +@@ -1813,7 +1817,7 @@ int xhci_alloc_erst(struct xhci_hcd *xhc for (val = 0; val < evt_ring->num_segs; val++) { entry = &erst->entries[val]; entry->seg_addr = cpu_to_le64(seg->dma); @@ -204,7 +204,7 @@ Signed-off-by: Jonathan Bell xhci_err(xhci, "Tried to move enqueue past ring segment\n"); return; } -@@ -3150,7 +3153,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd +@@ -3151,7 +3154,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd * that clears the EHB. */ while (xhci_handle_event(xhci) > 0) { @@ -213,7 +213,7 @@ Signed-off-by: Jonathan Bell continue; xhci_update_erst_dequeue(xhci, event_ring_deq); event_ring_deq = xhci->event_ring->dequeue; -@@ -3292,7 +3295,8 @@ static int prepare_ring(struct xhci_hcd +@@ -3293,7 +3296,8 @@ static int prepare_ring(struct xhci_hcd } } @@ -247,7 +247,7 @@ Signed-off-by: Jonathan Bell * when the cycle bit is set to 1. --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1634,6 +1634,7 @@ struct xhci_ring { +@@ -1639,6 +1639,7 @@ struct xhci_ring { unsigned int num_trbs_free; unsigned int num_trbs_free_temp; unsigned int bounce_buf_len; diff --git a/target/linux/bcm27xx/patches-6.1/950-0362-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch b/target/linux/bcm27xx/patches-6.1/950-0362-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch index 041f98a97d..da0d7cd969 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0362-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0362-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch @@ -63,7 +63,7 @@ Signed-off-by: Jonathan Bell if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1904,6 +1904,7 @@ struct xhci_hcd { +@@ -1909,6 +1909,7 @@ struct xhci_hcd { #define XHCI_ZHAOXIN_TRB_FETCH BIT_ULL(45) #define XHCI_ZHAOXIN_HOST BIT_ULL(46) #define XHCI_AVOID_DQ_ON_LINK BIT_ULL(47) diff --git a/target/linux/bcm27xx/patches-6.1/950-0390-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch b/target/linux/bcm27xx/patches-6.1/950-0390-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch index 0dd7b78b30..df13f539bd 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0390-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0390-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch @@ -36,7 +36,7 @@ Signed-off-by: Jonathan Bell if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c -@@ -3605,14 +3605,15 @@ int xhci_queue_bulk_tx(struct xhci_hcd * +@@ -3606,14 +3606,15 @@ int xhci_queue_bulk_tx(struct xhci_hcd * unsigned int num_trbs; unsigned int start_cycle, num_sgs = 0; unsigned int enqd_len, block_len, trb_buff_len, full_len; @@ -54,7 +54,7 @@ Signed-off-by: Jonathan Bell full_len = urb->transfer_buffer_length; /* If we have scatter/gather list, we use it. */ if (urb->num_sgs && !(urb->transfer_flags & URB_DMA_MAP_SINGLE)) { -@@ -3649,6 +3650,17 @@ int xhci_queue_bulk_tx(struct xhci_hcd * +@@ -3650,6 +3651,17 @@ int xhci_queue_bulk_tx(struct xhci_hcd * start_cycle = ring->cycle_state; send_addr = addr; @@ -72,7 +72,7 @@ Signed-off-by: Jonathan Bell /* Queue the TRBs, even if they are zero-length */ for (enqd_len = 0; first_trb || enqd_len < full_len; enqd_len += trb_buff_len) { -@@ -3661,6 +3673,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd * +@@ -3662,6 +3674,11 @@ int xhci_queue_bulk_tx(struct xhci_hcd * if (enqd_len + trb_buff_len > full_len) trb_buff_len = full_len - enqd_len; @@ -86,7 +86,7 @@ Signed-off-by: Jonathan Bell first_trb = false; --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1905,6 +1905,7 @@ struct xhci_hcd { +@@ -1910,6 +1910,7 @@ struct xhci_hcd { #define XHCI_ZHAOXIN_HOST BIT_ULL(46) #define XHCI_AVOID_DQ_ON_LINK BIT_ULL(47) #define XHCI_VLI_TRB_CACHE_BUG BIT_ULL(48) diff --git a/target/linux/bcm27xx/patches-6.1/950-0392-usb-xhci-rework-XHCI_VLI_SS_BULK_OUT_BUG-quirk.patch b/target/linux/bcm27xx/patches-6.1/950-0392-usb-xhci-rework-XHCI_VLI_SS_BULK_OUT_BUG-quirk.patch index e3f1848ad5..fecee7d952 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0392-usb-xhci-rework-XHCI_VLI_SS_BULK_OUT_BUG-quirk.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0392-usb-xhci-rework-XHCI_VLI_SS_BULK_OUT_BUG-quirk.patch @@ -13,7 +13,7 @@ Signed-off-by: Jonathan Bell --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c -@@ -3605,7 +3605,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd * +@@ -3606,7 +3606,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd * unsigned int num_trbs; unsigned int start_cycle, num_sgs = 0; unsigned int enqd_len, block_len, trb_buff_len, full_len; @@ -22,7 +22,7 @@ Signed-off-by: Jonathan Bell u32 field, length_field, remainder, maxpacket; u64 addr, send_addr; -@@ -3651,14 +3651,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd * +@@ -3652,14 +3652,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd * send_addr = addr; if (xhci->quirks & XHCI_VLI_SS_BULK_OUT_BUG && @@ -40,7 +40,7 @@ Signed-off-by: Jonathan Bell } /* Queue the TRBs, even if they are zero-length */ -@@ -3673,7 +3668,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd * +@@ -3674,7 +3669,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd * if (enqd_len + trb_buff_len > full_len) trb_buff_len = full_len - enqd_len; diff --git a/target/linux/bcm27xx/patches-6.1/950-0438-usb-xhci-account-for-num_trbs_free-when-invalidating.patch b/target/linux/bcm27xx/patches-6.1/950-0438-usb-xhci-account-for-num_trbs_free-when-invalidating.patch index f604759c2f..1afe830091 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0438-usb-xhci-account-for-num_trbs_free-when-invalidating.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0438-usb-xhci-account-for-num_trbs_free-when-invalidating.patch @@ -31,7 +31,7 @@ Signed-off-by: Jonathan Bell --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c -@@ -1012,11 +1012,13 @@ static int xhci_invalidate_cancelled_tds +@@ -1013,11 +1013,13 @@ static int xhci_invalidate_cancelled_tds td->urb->stream_id, td->urb, cached_td->urb->stream_id, cached_td->urb); cached_td = td; @@ -45,7 +45,7 @@ Signed-off-by: Jonathan Bell } } -@@ -1264,10 +1266,7 @@ static void update_ring_for_set_deq_comp +@@ -1265,10 +1267,7 @@ static void update_ring_for_set_deq_comp unsigned int ep_index) { union xhci_trb *dequeue_temp; @@ -56,7 +56,7 @@ Signed-off-by: Jonathan Bell dequeue_temp = ep_ring->dequeue; /* If we get two back-to-back stalls, and the first stalled transfer -@@ -1282,8 +1281,6 @@ static void update_ring_for_set_deq_comp +@@ -1283,8 +1282,6 @@ static void update_ring_for_set_deq_comp } while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) { @@ -65,7 +65,7 @@ Signed-off-by: Jonathan Bell ep_ring->dequeue++; if (trb_is_link(ep_ring->dequeue)) { if (ep_ring->dequeue == -@@ -1293,15 +1290,10 @@ static void update_ring_for_set_deq_comp +@@ -1294,15 +1291,10 @@ static void update_ring_for_set_deq_comp ep_ring->dequeue = ep_ring->deq_seg->trbs; } if (ep_ring->dequeue == dequeue_temp) { diff --git a/target/linux/bcm27xx/patches-6.1/950-0469-usb-xhci-add-XHCI_VLI_HUB_TT_QUIRK.patch b/target/linux/bcm27xx/patches-6.1/950-0469-usb-xhci-add-XHCI_VLI_HUB_TT_QUIRK.patch index ade55cf337..ab0bae587b 100644 --- a/target/linux/bcm27xx/patches-6.1/950-0469-usb-xhci-add-XHCI_VLI_HUB_TT_QUIRK.patch +++ b/target/linux/bcm27xx/patches-6.1/950-0469-usb-xhci-add-XHCI_VLI_HUB_TT_QUIRK.patch @@ -40,7 +40,7 @@ Signed-off-by: Jonathan Bell if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c -@@ -3582,6 +3582,48 @@ static int xhci_align_td(struct xhci_hcd +@@ -3583,6 +3583,48 @@ static int xhci_align_td(struct xhci_hcd return 1; } @@ -89,7 +89,7 @@ Signed-off-by: Jonathan Bell /* This is very similar to what ehci-q.c qtd_fill() does */ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb, int slot_id, unsigned int ep_index) -@@ -3750,6 +3792,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd * +@@ -3751,6 +3793,8 @@ int xhci_queue_bulk_tx(struct xhci_hcd * } check_trb_math(urb, enqd_len); @@ -98,7 +98,7 @@ Signed-off-by: Jonathan Bell giveback_first_trb(xhci, slot_id, ep_index, urb->stream_id, start_cycle, start_trb); return 0; -@@ -3885,6 +3929,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * +@@ -3886,6 +3930,8 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * /* Event on completion */ field | TRB_IOC | TRB_TYPE(TRB_STATUS) | ep_ring->cycle_state); @@ -109,7 +109,7 @@ Signed-off-by: Jonathan Bell return 0; --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1906,6 +1906,7 @@ struct xhci_hcd { +@@ -1911,6 +1911,7 @@ struct xhci_hcd { #define XHCI_AVOID_DQ_ON_LINK BIT_ULL(47) #define XHCI_VLI_TRB_CACHE_BUG BIT_ULL(48) #define XHCI_VLI_SS_BULK_OUT_BUG BIT_ULL(49) diff --git a/target/linux/bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch b/target/linux/bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch index edae77ccd1..9c769880a0 100644 --- a/target/linux/bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch +++ b/target/linux/bcm53xx/patches-6.1/180-usb-xhci-add-support-for-performing-fake-doorbell.patch @@ -108,7 +108,7 @@ it on BCM4708 family. if (xhci->quirks & XHCI_NEC_HOST) --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h -@@ -1902,6 +1902,7 @@ struct xhci_hcd { +@@ -1907,6 +1907,7 @@ struct xhci_hcd { #define XHCI_RESET_TO_DEFAULT BIT_ULL(44) #define XHCI_ZHAOXIN_TRB_FETCH BIT_ULL(45) #define XHCI_ZHAOXIN_HOST BIT_ULL(46) diff --git a/target/linux/generic/backport-6.1/740-v6.9-01-netfilter-flowtable-validate-pppoe-header.patch b/target/linux/generic/backport-6.1/740-v6.9-01-netfilter-flowtable-validate-pppoe-header.patch deleted file mode 100644 index 29f211e8a5..0000000000 --- a/target/linux/generic/backport-6.1/740-v6.9-01-netfilter-flowtable-validate-pppoe-header.patch +++ /dev/null @@ -1,87 +0,0 @@ -From: Pablo Neira Ayuso -Date: Thu, 11 Apr 2024 13:28:59 +0200 -Subject: [PATCH] netfilter: flowtable: validate pppoe header - -Ensure there is sufficient room to access the protocol field of the -PPPoe header. Validate it once before the flowtable lookup, then use a -helper function to access protocol field. - -Reported-by: syzbot+b6f07e1c07ef40199081@syzkaller.appspotmail.com -Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support") -Signed-off-by: Pablo Neira Ayuso ---- - ---- a/include/net/netfilter/nf_flow_table.h -+++ b/include/net/netfilter/nf_flow_table.h -@@ -335,7 +335,7 @@ int nf_flow_rule_route_ipv6(struct net * - int nf_flow_table_offload_init(void); - void nf_flow_table_offload_exit(void); - --static inline __be16 nf_flow_pppoe_proto(const struct sk_buff *skb) -+static inline __be16 __nf_flow_pppoe_proto(const struct sk_buff *skb) - { - __be16 proto; - -@@ -351,6 +351,16 @@ static inline __be16 nf_flow_pppoe_proto - return 0; - } - -+static inline bool nf_flow_pppoe_proto(struct sk_buff *skb, __be16 *inner_proto) -+{ -+ if (!pskb_may_pull(skb, PPPOE_SES_HLEN)) -+ return false; -+ -+ *inner_proto = __nf_flow_pppoe_proto(skb); -+ -+ return true; -+} -+ - #define NF_FLOW_TABLE_STAT_INC(net, count) __this_cpu_inc((net)->ft.stat->count) - #define NF_FLOW_TABLE_STAT_DEC(net, count) __this_cpu_dec((net)->ft.stat->count) - #define NF_FLOW_TABLE_STAT_INC_ATOMIC(net, count) \ ---- a/net/netfilter/nf_flow_table_inet.c -+++ b/net/netfilter/nf_flow_table_inet.c -@@ -21,7 +21,8 @@ nf_flow_offload_inet_hook(void *priv, st - proto = veth->h_vlan_encapsulated_proto; - break; - case htons(ETH_P_PPP_SES): -- proto = nf_flow_pppoe_proto(skb); -+ if (!nf_flow_pppoe_proto(skb, &proto)) -+ return NF_ACCEPT; - break; - default: - proto = skb->protocol; ---- a/net/netfilter/nf_flow_table_ip.c -+++ b/net/netfilter/nf_flow_table_ip.c -@@ -267,10 +267,11 @@ static unsigned int nf_flow_xmit_xfrm(st - return NF_STOLEN; - } - --static bool nf_flow_skb_encap_protocol(const struct sk_buff *skb, __be16 proto, -+static bool nf_flow_skb_encap_protocol(struct sk_buff *skb, __be16 proto, - u32 *offset) - { - struct vlan_ethhdr *veth; -+ __be16 inner_proto; - - switch (skb->protocol) { - case htons(ETH_P_8021Q): -@@ -281,7 +282,8 @@ static bool nf_flow_skb_encap_protocol(c - } - break; - case htons(ETH_P_PPP_SES): -- if (nf_flow_pppoe_proto(skb) == proto) { -+ if (nf_flow_pppoe_proto(skb, &inner_proto) && -+ inner_proto == proto) { - *offset += PPPOE_SES_HLEN; - return true; - } -@@ -310,7 +312,7 @@ static void nf_flow_encap_pop(struct sk_ - skb_reset_network_header(skb); - break; - case htons(ETH_P_PPP_SES): -- skb->protocol = nf_flow_pppoe_proto(skb); -+ skb->protocol = __nf_flow_pppoe_proto(skb); - skb_pull(skb, PPPOE_SES_HLEN); - skb_reset_network_header(skb); - break; diff --git a/target/linux/generic/backport-6.1/740-v6.9-02-netfilter-flowtable-incorrect-pppoe-tuple.patch b/target/linux/generic/backport-6.1/740-v6.9-02-netfilter-flowtable-incorrect-pppoe-tuple.patch deleted file mode 100644 index 3b822b169d..0000000000 --- a/target/linux/generic/backport-6.1/740-v6.9-02-netfilter-flowtable-incorrect-pppoe-tuple.patch +++ /dev/null @@ -1,24 +0,0 @@ -From: Pablo Neira Ayuso -Date: Thu, 11 Apr 2024 13:29:00 +0200 -Subject: [PATCH] netfilter: flowtable: incorrect pppoe tuple - -pppoe traffic reaching ingress path does not match the flowtable entry -because the pppoe header is expected to be at the network header offset. -This bug causes a mismatch in the flow table lookup, so pppoe packets -enter the classical forwarding path. - -Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support") -Signed-off-by: Pablo Neira Ayuso ---- - ---- a/net/netfilter/nf_flow_table_ip.c -+++ b/net/netfilter/nf_flow_table_ip.c -@@ -156,7 +156,7 @@ static void nf_flow_tuple_encap(struct s - tuple->encap[i].proto = skb->protocol; - break; - case htons(ETH_P_PPP_SES): -- phdr = (struct pppoe_hdr *)skb_mac_header(skb); -+ phdr = (struct pppoe_hdr *)skb_network_header(skb); - tuple->encap[i].id = ntohs(phdr->sid); - tuple->encap[i].proto = skb->protocol; - break; diff --git a/target/linux/generic/backport-6.1/766-v6.10-net-dsa-allow-DSA-switch-drivers-to-provide-their-ow.patch b/target/linux/generic/backport-6.1/766-v6.10-net-dsa-allow-DSA-switch-drivers-to-provide-their-ow.patch index 51250ac97a..0119925ab0 100644 --- a/target/linux/generic/backport-6.1/766-v6.10-net-dsa-allow-DSA-switch-drivers-to-provide-their-ow.patch +++ b/target/linux/generic/backport-6.1/766-v6.10-net-dsa-allow-DSA-switch-drivers-to-provide-their-ow.patch @@ -99,7 +99,7 @@ Signed-off-by: Jakub Kicinski } --- a/net/dsa/dsa2.c +++ b/net/dsa/dsa2.c -@@ -1736,6 +1736,15 @@ static int dsa_switch_probe(struct dsa_s +@@ -1758,6 +1758,15 @@ static int dsa_switch_probe(struct dsa_s if (!ds->num_ports) return -EINVAL; diff --git a/target/linux/generic/backport-6.1/790-01-v6.2-net-dsa-mt7530-remove-redundant-assignment.patch b/target/linux/generic/backport-6.1/790-01-v6.2-net-dsa-mt7530-remove-redundant-assignment.patch index f662a76368..e0319fd355 100644 --- a/target/linux/generic/backport-6.1/790-01-v6.2-net-dsa-mt7530-remove-redundant-assignment.patch +++ b/target/linux/generic/backport-6.1/790-01-v6.2-net-dsa-mt7530-remove-redundant-assignment.patch @@ -20,7 +20,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -3010,9 +3010,6 @@ static void mt753x_phylink_get_caps(stru +@@ -3198,9 +3198,6 @@ static void mt753x_phylink_get_caps(stru config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000FD; diff --git a/target/linux/generic/backport-6.1/790-02-v6.4-net-dsa-mt7530-use-external-PCS-driver.patch b/target/linux/generic/backport-6.1/790-02-v6.4-net-dsa-mt7530-use-external-PCS-driver.patch index 36ff3549e9..2697f2e563 100644 --- a/target/linux/generic/backport-6.1/790-02-v6.4-net-dsa-mt7530-use-external-PCS-driver.patch +++ b/target/linux/generic/backport-6.1/790-02-v6.4-net-dsa-mt7530-use-external-PCS-driver.patch @@ -44,7 +44,7 @@ Signed-off-by: Jakub Kicinski #include #include #include -@@ -2651,128 +2652,11 @@ static int mt7531_rgmii_setup(struct mt7 +@@ -2839,128 +2840,11 @@ static int mt7531_rgmii_setup(struct mt7 return 0; } @@ -173,7 +173,7 @@ Signed-off-by: Jakub Kicinski static int mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) -@@ -2795,11 +2679,11 @@ mt7531_mac_config(struct dsa_switch *ds, +@@ -2983,11 +2867,11 @@ mt7531_mac_config(struct dsa_switch *ds, phydev = dp->slave->phydev; return mt7531_rgmii_setup(priv, port, interface, phydev); case PHY_INTERFACE_MODE_SGMII: @@ -187,7 +187,7 @@ Signed-off-by: Jakub Kicinski default: return -EINVAL; } -@@ -2824,11 +2708,11 @@ mt753x_phylink_mac_select_pcs(struct dsa +@@ -3012,11 +2896,11 @@ mt753x_phylink_mac_select_pcs(struct dsa switch (interface) { case PHY_INTERFACE_MODE_TRGMII: @@ -201,7 +201,7 @@ Signed-off-by: Jakub Kicinski default: return NULL; } -@@ -3066,86 +2950,6 @@ static void mt7530_pcs_get_state(struct +@@ -3254,86 +3138,6 @@ static void mt7530_pcs_get_state(struct state->pause |= MLO_PAUSE_TX; } @@ -288,7 +288,7 @@ Signed-off-by: Jakub Kicinski static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int mode, phy_interface_t interface, const unsigned long *advertising, -@@ -3165,18 +2969,57 @@ static const struct phylink_pcs_ops mt75 +@@ -3353,18 +3157,57 @@ static const struct phylink_pcs_ops mt75 .pcs_an_restart = mt7530_pcs_an_restart, }; @@ -352,7 +352,7 @@ Signed-off-by: Jakub Kicinski int i, ret; /* Initialise the PCS devices */ -@@ -3184,8 +3027,6 @@ mt753x_setup(struct dsa_switch *ds) +@@ -3372,8 +3215,6 @@ mt753x_setup(struct dsa_switch *ds) priv->pcs[i].pcs.ops = priv->info->pcs_ops; priv->pcs[i].priv = priv; priv->pcs[i].port = i; @@ -361,7 +361,7 @@ Signed-off-by: Jakub Kicinski } ret = priv->info->sw_setup(ds); -@@ -3200,6 +3041,16 @@ mt753x_setup(struct dsa_switch *ds) +@@ -3388,6 +3229,16 @@ mt753x_setup(struct dsa_switch *ds) if (ret && priv->irq) mt7530_free_irq_common(priv); @@ -378,7 +378,7 @@ Signed-off-by: Jakub Kicinski return ret; } -@@ -3291,7 +3142,7 @@ static const struct mt753x_info mt753x_t +@@ -3480,7 +3331,7 @@ static const struct mt753x_info mt753x_t }, [ID_MT7531] = { .id = ID_MT7531, @@ -387,7 +387,7 @@ Signed-off-by: Jakub Kicinski .sw_setup = mt7531_setup, .phy_read = mt7531_ind_phy_read, .phy_write = mt7531_ind_phy_write, -@@ -3399,7 +3250,7 @@ static void +@@ -3588,7 +3439,7 @@ static void mt7530_remove(struct mdio_device *mdiodev) { struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); @@ -396,7 +396,7 @@ Signed-off-by: Jakub Kicinski if (!priv) return; -@@ -3418,6 +3269,10 @@ mt7530_remove(struct mdio_device *mdiode +@@ -3607,6 +3458,10 @@ mt7530_remove(struct mdio_device *mdiode mt7530_free_irq(priv); dsa_unregister_switch(priv->ds); @@ -409,7 +409,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h -@@ -391,47 +391,8 @@ enum mt7530_vlan_port_acc_frm { +@@ -401,47 +401,8 @@ enum mt7530_vlan_port_acc_frm { CCR_TX_OCT_CNT_BAD) /* MT7531 SGMII register group */ @@ -459,7 +459,7 @@ Signed-off-by: Jakub Kicinski /* Register for system reset */ #define MT7530_SYS_CTRL 0x7000 -@@ -730,13 +691,13 @@ struct mt7530_fdb { +@@ -741,13 +702,13 @@ struct mt7530_fdb { * @pm: The matrix used to show all connections with the port. * @pvid: The VLAN specified is to be considered a PVID at ingress. Any * untagged frames will be assigned to the related VLAN. diff --git a/target/linux/generic/backport-6.1/790-04-v6.4-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch b/target/linux/generic/backport-6.1/790-04-v6.4-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch index ed24c452e2..1bf19a813e 100644 --- a/target/linux/generic/backport-6.1/790-04-v6.4-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch +++ b/target/linux/generic/backport-6.1/790-04-v6.4-net-dsa-mt7530-refactor-SGMII-PCS-creation.patch @@ -18,7 +18,7 @@ Signed-off-by: David S. Miller --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -3001,26 +3001,56 @@ static const struct regmap_bus mt7531_re +@@ -3189,26 +3189,56 @@ static const struct regmap_bus mt7531_re .reg_update_bits = mt7530_regmap_update_bits, }; @@ -88,7 +88,7 @@ Signed-off-by: David S. Miller int i, ret; /* Initialise the PCS devices */ -@@ -3042,15 +3072,11 @@ mt753x_setup(struct dsa_switch *ds) +@@ -3230,15 +3260,11 @@ mt753x_setup(struct dsa_switch *ds) if (ret && priv->irq) mt7530_free_irq_common(priv); diff --git a/target/linux/generic/backport-6.1/790-05-v6.4-net-dsa-mt7530-use-unlocked-regmap-accessors.patch b/target/linux/generic/backport-6.1/790-05-v6.4-net-dsa-mt7530-use-unlocked-regmap-accessors.patch index 0298ebd274..bd28b4be76 100644 --- a/target/linux/generic/backport-6.1/790-05-v6.4-net-dsa-mt7530-use-unlocked-regmap-accessors.patch +++ b/target/linux/generic/backport-6.1/790-05-v6.4-net-dsa-mt7530-use-unlocked-regmap-accessors.patch @@ -19,7 +19,7 @@ Signed-off-by: David S. Miller --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2974,7 +2974,7 @@ static int mt7530_regmap_read(void *cont +@@ -3162,7 +3162,7 @@ static int mt7530_regmap_read(void *cont { struct mt7530_priv *priv = context; @@ -28,7 +28,7 @@ Signed-off-by: David S. Miller return 0; }; -@@ -2982,23 +2982,25 @@ static int mt7530_regmap_write(void *con +@@ -3170,23 +3170,25 @@ static int mt7530_regmap_write(void *con { struct mt7530_priv *priv = context; @@ -62,7 +62,7 @@ Signed-off-by: David S. Miller }; static int -@@ -3024,6 +3026,9 @@ mt7531_create_sgmii(struct mt7530_priv * +@@ -3212,6 +3214,9 @@ mt7531_create_sgmii(struct mt7530_priv * mt7531_pcs_config[i]->reg_stride = 4; mt7531_pcs_config[i]->reg_base = MT7531_SGMII_REG_BASE(5 + i); mt7531_pcs_config[i]->max_register = 0x17c; diff --git a/target/linux/generic/backport-6.1/790-06-v6.4-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch b/target/linux/generic/backport-6.1/790-06-v6.4-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch index e5625f67de..42c225d91c 100644 --- a/target/linux/generic/backport-6.1/790-06-v6.4-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch +++ b/target/linux/generic/backport-6.1/790-06-v6.4-net-dsa-mt7530-use-regmap-to-access-switch-register-.patch @@ -133,7 +133,7 @@ Signed-off-by: David S. Miller } static void -@@ -2970,22 +2991,6 @@ static const struct phylink_pcs_ops mt75 +@@ -3158,22 +3179,6 @@ static const struct phylink_pcs_ops mt75 .pcs_an_restart = mt7530_pcs_an_restart, }; @@ -156,7 +156,7 @@ Signed-off-by: David S. Miller static void mt7530_mdio_regmap_lock(void *mdio_lock) { -@@ -2998,7 +3003,7 @@ mt7530_mdio_regmap_unlock(void *mdio_loc +@@ -3186,7 +3191,7 @@ mt7530_mdio_regmap_unlock(void *mdio_loc mutex_unlock(mdio_lock); } @@ -165,7 +165,7 @@ Signed-off-by: David S. Miller .reg_write = mt7530_regmap_write, .reg_read = mt7530_regmap_read, }; -@@ -3031,7 +3036,7 @@ mt7531_create_sgmii(struct mt7530_priv * +@@ -3219,7 +3224,7 @@ mt7531_create_sgmii(struct mt7530_priv * mt7531_pcs_config[i]->lock_arg = &priv->bus->mdio_lock; regmap = devm_regmap_init(priv->dev, @@ -174,7 +174,7 @@ Signed-off-by: David S. Miller mt7531_pcs_config[i]); if (IS_ERR(regmap)) { ret = PTR_ERR(regmap); -@@ -3196,6 +3201,7 @@ MODULE_DEVICE_TABLE(of, mt7530_of_match) +@@ -3385,6 +3390,7 @@ MODULE_DEVICE_TABLE(of, mt7530_of_match) static int mt7530_probe(struct mdio_device *mdiodev) { @@ -182,7 +182,7 @@ Signed-off-by: David S. Miller struct mt7530_priv *priv; struct device_node *dn; -@@ -3275,6 +3281,21 @@ mt7530_probe(struct mdio_device *mdiodev +@@ -3464,6 +3470,21 @@ mt7530_probe(struct mdio_device *mdiodev mutex_init(&priv->reg_mutex); dev_set_drvdata(&mdiodev->dev, priv); @@ -206,7 +206,7 @@ Signed-off-by: David S. Miller --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h -@@ -774,6 +774,7 @@ struct mt753x_info { +@@ -785,6 +785,7 @@ struct mt753x_info { * @dev: The device pointer * @ds: The pointer to the dsa core structure * @bus: The bus used for the device and built-in PHY @@ -214,7 +214,7 @@ Signed-off-by: David S. Miller * @rstc: The pointer to reset control used by MCM * @core_pwr: The power supplied into the core * @io_pwr: The power supplied into the I/O -@@ -794,6 +795,7 @@ struct mt7530_priv { +@@ -805,6 +806,7 @@ struct mt7530_priv { struct device *dev; struct dsa_switch *ds; struct mii_bus *bus; diff --git a/target/linux/generic/backport-6.1/790-07-v6.4-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch b/target/linux/generic/backport-6.1/790-07-v6.4-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch index ca1f38f9c2..9cd817c056 100644 --- a/target/linux/generic/backport-6.1/790-07-v6.4-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch +++ b/target/linux/generic/backport-6.1/790-07-v6.4-net-dsa-mt7530-move-SGMII-PCS-creation-to-mt7530_pro.patch @@ -18,7 +18,7 @@ Signed-off-by: David S. Miller --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -3082,12 +3082,6 @@ mt753x_setup(struct dsa_switch *ds) +@@ -3270,12 +3270,6 @@ mt753x_setup(struct dsa_switch *ds) if (ret && priv->irq) mt7530_free_irq_common(priv); @@ -31,7 +31,7 @@ Signed-off-by: David S. Miller return ret; } -@@ -3204,6 +3198,7 @@ mt7530_probe(struct mdio_device *mdiodev +@@ -3393,6 +3387,7 @@ mt7530_probe(struct mdio_device *mdiodev static struct regmap_config *regmap_config; struct mt7530_priv *priv; struct device_node *dn; @@ -39,7 +39,7 @@ Signed-off-by: David S. Miller dn = mdiodev->dev.of_node; -@@ -3296,6 +3291,12 @@ mt7530_probe(struct mdio_device *mdiodev +@@ -3485,6 +3480,12 @@ mt7530_probe(struct mdio_device *mdiodev if (IS_ERR(priv->regmap)) return PTR_ERR(priv->regmap); diff --git a/target/linux/generic/backport-6.1/790-08-v6.4-net-dsa-mt7530-introduce-mutex-helpers.patch b/target/linux/generic/backport-6.1/790-08-v6.4-net-dsa-mt7530-introduce-mutex-helpers.patch index 813e976810..4f77078eef 100644 --- a/target/linux/generic/backport-6.1/790-08-v6.4-net-dsa-mt7530-introduce-mutex-helpers.patch +++ b/target/linux/generic/backport-6.1/790-08-v6.4-net-dsa-mt7530-introduce-mutex-helpers.patch @@ -114,7 +114,7 @@ Signed-off-by: David S. Miller } static void -@@ -645,14 +649,13 @@ static int +@@ -659,14 +663,13 @@ static int mt7531_ind_c45_phy_read(struct mt7530_priv *priv, int port, int devad, int regnum) { @@ -130,7 +130,7 @@ Signed-off-by: David S. Miller ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, !(val & MT7531_PHY_ACS_ST), 20, 100000); -@@ -685,7 +688,7 @@ mt7531_ind_c45_phy_read(struct mt7530_pr +@@ -699,7 +702,7 @@ mt7531_ind_c45_phy_read(struct mt7530_pr ret = val & MT7531_MDIO_RW_DATA_MASK; out: @@ -139,7 +139,7 @@ Signed-off-by: David S. Miller return ret; } -@@ -694,14 +697,13 @@ static int +@@ -708,14 +711,13 @@ static int mt7531_ind_c45_phy_write(struct mt7530_priv *priv, int port, int devad, int regnum, u32 data) { @@ -155,7 +155,7 @@ Signed-off-by: David S. Miller ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, !(val & MT7531_PHY_ACS_ST), 20, 100000); -@@ -733,7 +735,7 @@ mt7531_ind_c45_phy_write(struct mt7530_p +@@ -747,7 +749,7 @@ mt7531_ind_c45_phy_write(struct mt7530_p } out: @@ -164,7 +164,7 @@ Signed-off-by: David S. Miller return ret; } -@@ -741,14 +743,13 @@ out: +@@ -755,14 +757,13 @@ out: static int mt7531_ind_c22_phy_read(struct mt7530_priv *priv, int port, int regnum) { @@ -180,7 +180,7 @@ Signed-off-by: David S. Miller ret = readx_poll_timeout(_mt7530_unlocked_read, &p, val, !(val & MT7531_PHY_ACS_ST), 20, 100000); -@@ -771,7 +772,7 @@ mt7531_ind_c22_phy_read(struct mt7530_pr +@@ -785,7 +786,7 @@ mt7531_ind_c22_phy_read(struct mt7530_pr ret = val & MT7531_MDIO_RW_DATA_MASK; out: @@ -189,7 +189,7 @@ Signed-off-by: David S. Miller return ret; } -@@ -780,14 +781,13 @@ static int +@@ -794,14 +795,13 @@ static int mt7531_ind_c22_phy_write(struct mt7530_priv *priv, int port, int regnum, u16 data) { @@ -205,7 +205,7 @@ Signed-off-by: David S. Miller ret = readx_poll_timeout(_mt7530_unlocked_read, &p, reg, !(reg & MT7531_PHY_ACS_ST), 20, 100000); -@@ -809,7 +809,7 @@ mt7531_ind_c22_phy_write(struct mt7530_p +@@ -823,7 +823,7 @@ mt7531_ind_c22_phy_write(struct mt7530_p } out: @@ -214,7 +214,7 @@ Signed-off-by: David S. Miller return ret; } -@@ -1161,7 +1161,6 @@ static int +@@ -1343,7 +1343,6 @@ static int mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) { struct mt7530_priv *priv = ds->priv; @@ -222,7 +222,7 @@ Signed-off-by: David S. Miller int length; u32 val; -@@ -1172,7 +1171,7 @@ mt7530_port_change_mtu(struct dsa_switch +@@ -1354,7 +1353,7 @@ mt7530_port_change_mtu(struct dsa_switch if (!dsa_is_cpu_port(ds, port)) return 0; @@ -231,7 +231,7 @@ Signed-off-by: David S. Miller val = mt7530_mii_read(priv, MT7530_GMACCR); val &= ~MAX_RX_PKT_LEN_MASK; -@@ -1193,7 +1192,7 @@ mt7530_port_change_mtu(struct dsa_switch +@@ -1375,7 +1374,7 @@ mt7530_port_change_mtu(struct dsa_switch mt7530_mii_write(priv, MT7530_GMACCR, val); @@ -240,7 +240,7 @@ Signed-off-by: David S. Miller return 0; } -@@ -1994,10 +1993,10 @@ mt7530_irq_thread_fn(int irq, void *dev_ +@@ -2176,10 +2175,10 @@ mt7530_irq_thread_fn(int irq, void *dev_ u32 val; int p; @@ -253,7 +253,7 @@ Signed-off-by: David S. Miller for (p = 0; p < MT7530_NUM_PHYS; p++) { if (BIT(p) & val) { -@@ -2033,7 +2032,7 @@ mt7530_irq_bus_lock(struct irq_data *d) +@@ -2215,7 +2214,7 @@ mt7530_irq_bus_lock(struct irq_data *d) { struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); @@ -262,7 +262,7 @@ Signed-off-by: David S. Miller } static void -@@ -2042,7 +2041,7 @@ mt7530_irq_bus_sync_unlock(struct irq_da +@@ -2224,7 +2223,7 @@ mt7530_irq_bus_sync_unlock(struct irq_da struct mt7530_priv *priv = irq_data_get_irq_chip_data(d); mt7530_mii_write(priv, MT7530_SYS_INT_EN, priv->irq_enable); diff --git a/target/linux/generic/backport-6.1/790-09-v6.4-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch b/target/linux/generic/backport-6.1/790-09-v6.4-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch index 177f6af780..9cb0b2dd61 100644 --- a/target/linux/generic/backport-6.1/790-09-v6.4-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch +++ b/target/linux/generic/backport-6.1/790-09-v6.4-net-dsa-mt7530-move-p5_intf_modes-function-to-mt7530.patch @@ -21,7 +21,7 @@ Signed-off-by: David S. Miller --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -950,6 +950,24 @@ mt7530_set_ageing_time(struct dsa_switch +@@ -964,6 +964,24 @@ mt7530_set_ageing_time(struct dsa_switch return 0; } @@ -48,7 +48,7 @@ Signed-off-by: David S. Miller struct mt7530_priv *priv = ds->priv; --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h -@@ -709,24 +709,6 @@ enum p5_interface_select { +@@ -720,24 +720,6 @@ enum p5_interface_select { P5_INTF_SEL_GMAC5_SGMII, }; diff --git a/target/linux/generic/backport-6.1/790-10-v6.4-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch b/target/linux/generic/backport-6.1/790-10-v6.4-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch index 8950caaaef..a6af682826 100644 --- a/target/linux/generic/backport-6.1/790-10-v6.4-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch +++ b/target/linux/generic/backport-6.1/790-10-v6.4-net-dsa-mt7530-introduce-mt7530_probe_common-helper-.patch @@ -17,7 +17,7 @@ Signed-off-by: David S. Miller --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -3210,44 +3210,21 @@ static const struct of_device_id mt7530_ +@@ -3399,44 +3399,21 @@ static const struct of_device_id mt7530_ MODULE_DEVICE_TABLE(of, mt7530_of_match); static int @@ -67,7 +67,7 @@ Signed-off-by: David S. Miller if (!priv->info) return -EINVAL; -@@ -3261,23 +3238,53 @@ mt7530_probe(struct mdio_device *mdiodev +@@ -3450,23 +3427,53 @@ mt7530_probe(struct mdio_device *mdiodev return -EINVAL; priv->id = priv->info->id; @@ -131,7 +131,7 @@ Signed-off-by: David S. Miller priv->reset = devm_gpiod_get_optional(&mdiodev->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(priv->reset)) { -@@ -3286,12 +3293,15 @@ mt7530_probe(struct mdio_device *mdiodev +@@ -3475,12 +3482,15 @@ mt7530_probe(struct mdio_device *mdiodev } } diff --git a/target/linux/generic/backport-6.1/790-11-v6.4-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch b/target/linux/generic/backport-6.1/790-11-v6.4-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch index 24eadb589e..4192753e89 100644 --- a/target/linux/generic/backport-6.1/790-11-v6.4-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch +++ b/target/linux/generic/backport-6.1/790-11-v6.4-net-dsa-mt7530-introduce-mt7530_remove_common-helper.patch @@ -17,7 +17,7 @@ Signed-off-by: David S. Miller --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -3328,6 +3328,17 @@ mt7530_probe(struct mdio_device *mdiodev +@@ -3517,6 +3517,17 @@ mt7530_probe(struct mdio_device *mdiodev } static void @@ -35,7 +35,7 @@ Signed-off-by: David S. Miller mt7530_remove(struct mdio_device *mdiodev) { struct mt7530_priv *priv = dev_get_drvdata(&mdiodev->dev); -@@ -3346,15 +3357,10 @@ mt7530_remove(struct mdio_device *mdiode +@@ -3535,15 +3546,10 @@ mt7530_remove(struct mdio_device *mdiode dev_err(priv->dev, "Failed to disable io pwr: %d\n", ret); diff --git a/target/linux/generic/backport-6.1/790-12-v6.4-net-dsa-mt7530-introduce-separate-MDIO-driver.patch b/target/linux/generic/backport-6.1/790-12-v6.4-net-dsa-mt7530-introduce-separate-MDIO-driver.patch index a6bb7d9e7b..72a499381f 100644 --- a/target/linux/generic/backport-6.1/790-12-v6.4-net-dsa-mt7530-introduce-separate-MDIO-driver.patch +++ b/target/linux/generic/backport-6.1/790-12-v6.4-net-dsa-mt7530-introduce-separate-MDIO-driver.patch @@ -420,7 +420,7 @@ Signed-off-by: David S. Miller static u32 mt7530_mii_read(struct mt7530_priv *priv, u32 reg) { -@@ -3008,72 +2959,6 @@ static const struct phylink_pcs_ops mt75 +@@ -3196,72 +3147,6 @@ static const struct phylink_pcs_ops mt75 .pcs_an_restart = mt7530_pcs_an_restart, }; @@ -493,7 +493,7 @@ Signed-off-by: David S. Miller static int mt753x_setup(struct dsa_switch *ds) { -@@ -3132,7 +3017,7 @@ static int mt753x_set_mac_eee(struct dsa +@@ -3320,7 +3205,7 @@ static int mt753x_set_mac_eee(struct dsa return 0; } @@ -501,8 +501,8 @@ Signed-off-by: David S. Miller +const struct dsa_switch_ops mt7530_switch_ops = { .get_tag_protocol = mtk_get_tag_protocol, .setup = mt753x_setup, - .get_strings = mt7530_get_strings, -@@ -3166,8 +3051,9 @@ static const struct dsa_switch_ops mt753 + .preferred_default_local_cpu_port = mt753x_preferred_default_local_cpu_port, +@@ -3355,8 +3240,9 @@ static const struct dsa_switch_ops mt753 .get_mac_eee = mt753x_get_mac_eee, .set_mac_eee = mt753x_set_mac_eee, }; @@ -513,7 +513,7 @@ Signed-off-by: David S. Miller [ID_MT7621] = { .id = ID_MT7621, .pcs_ops = &mt7530_pcs_ops, -@@ -3200,16 +3086,9 @@ static const struct mt753x_info mt753x_t +@@ -3389,16 +3275,9 @@ static const struct mt753x_info mt753x_t .mac_port_config = mt7531_mac_config, }, }; @@ -532,7 +532,7 @@ Signed-off-by: David S. Miller mt7530_probe_common(struct mt7530_priv *priv) { struct device *dev = priv->dev; -@@ -3246,88 +3125,9 @@ mt7530_probe_common(struct mt7530_priv * +@@ -3435,88 +3314,9 @@ mt7530_probe_common(struct mt7530_priv * return 0; } @@ -623,7 +623,7 @@ Signed-off-by: David S. Miller mt7530_remove_common(struct mt7530_priv *priv) { if (priv->irq) -@@ -3337,55 +3137,7 @@ mt7530_remove_common(struct mt7530_priv +@@ -3526,55 +3326,7 @@ mt7530_remove_common(struct mt7530_priv mutex_destroy(&priv->reg_mutex); } @@ -682,7 +682,7 @@ Signed-off-by: David S. Miller MODULE_DESCRIPTION("Driver for Mediatek MT7530 Switch"); --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h -@@ -834,4 +834,10 @@ static inline void INIT_MT7530_DUMMY_POL +@@ -845,4 +845,10 @@ static inline void INIT_MT7530_DUMMY_POL p->reg = reg; } diff --git a/target/linux/generic/backport-6.1/790-14-v6.4-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch b/target/linux/generic/backport-6.1/790-14-v6.4-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch index 9bc3f54c23..f5573fc6c4 100644 --- a/target/linux/generic/backport-6.1/790-14-v6.4-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch +++ b/target/linux/generic/backport-6.1/790-14-v6.4-net-dsa-mt7530-introduce-driver-for-MT7988-built-in-.patch @@ -184,7 +184,7 @@ Signed-off-by: David S. Miller +MODULE_LICENSE("GPL"); --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2041,6 +2041,47 @@ static const struct irq_domain_ops mt753 +@@ -2223,6 +2223,47 @@ static const struct irq_domain_ops mt753 }; static void @@ -232,7 +232,7 @@ Signed-off-by: David S. Miller mt7530_setup_mdio_irq(struct mt7530_priv *priv) { struct dsa_switch *ds = priv->ds; -@@ -2074,8 +2115,15 @@ mt7530_setup_irq(struct mt7530_priv *pri +@@ -2256,8 +2297,15 @@ mt7530_setup_irq(struct mt7530_priv *pri return priv->irq ? : -EINVAL; } @@ -250,7 +250,7 @@ Signed-off-by: David S. Miller if (!priv->irq_domain) { dev_err(dev, "failed to create IRQ domain\n"); return -ENOMEM; -@@ -2574,6 +2622,25 @@ static void mt7531_mac_port_get_caps(str +@@ -2762,6 +2810,25 @@ static void mt7531_mac_port_get_caps(str } } @@ -276,7 +276,7 @@ Signed-off-by: David S. Miller static int mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state) { -@@ -2650,6 +2717,17 @@ static bool mt753x_is_mac_port(u32 port) +@@ -2838,6 +2905,17 @@ static bool mt753x_is_mac_port(u32 port) } static int @@ -294,7 +294,7 @@ Signed-off-by: David S. Miller mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { -@@ -2719,7 +2797,8 @@ mt753x_phylink_mac_config(struct dsa_swi +@@ -2907,7 +2985,8 @@ mt753x_phylink_mac_config(struct dsa_swi switch (port) { case 0 ... 4: /* Internal phy */ @@ -304,7 +304,7 @@ Signed-off-by: David S. Miller goto unsupported; break; case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ -@@ -2797,7 +2876,8 @@ static void mt753x_phylink_mac_link_up(s +@@ -2985,7 +3064,8 @@ static void mt753x_phylink_mac_link_up(s /* MT753x MAC works in 1G full duplex mode for all up-clocked * variants. */ @@ -314,7 +314,7 @@ Signed-off-by: David S. Miller (phy_interface_mode_is_8023z(interface))) { speed = SPEED_1000; duplex = DUPLEX_FULL; -@@ -2877,6 +2957,21 @@ mt7531_cpu_port_config(struct dsa_switch +@@ -3065,6 +3145,21 @@ mt7531_cpu_port_config(struct dsa_switch return 0; } @@ -336,7 +336,7 @@ Signed-off-by: David S. Miller static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { -@@ -3019,6 +3114,27 @@ static int mt753x_set_mac_eee(struct dsa +@@ -3207,6 +3302,27 @@ static int mt753x_set_mac_eee(struct dsa return 0; } @@ -364,7 +364,7 @@ Signed-off-by: David S. Miller const struct dsa_switch_ops mt7530_switch_ops = { .get_tag_protocol = mtk_get_tag_protocol, .setup = mt753x_setup, -@@ -3087,6 +3203,17 @@ const struct mt753x_info mt753x_table[] +@@ -3276,6 +3392,17 @@ const struct mt753x_info mt753x_table[] .mac_port_get_caps = mt7531_mac_port_get_caps, .mac_port_config = mt7531_mac_config, }, @@ -392,9 +392,9 @@ Signed-off-by: David S. Miller }; #define NUM_TRGMII_CTRL 5 -@@ -54,11 +55,11 @@ enum mt753x_id { - #define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16) +@@ -59,11 +60,11 @@ enum mt753x_id { #define MT7531_CPU_PMAP_MASK GENMASK(7, 0) + #define MT7531_CPU_PMAP(x) FIELD_PREP(MT7531_CPU_PMAP_MASK, x) -#define MT753X_MIRROR_REG(id) (((id) == ID_MT7531) ? \ +#define MT753X_MIRROR_REG(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \ @@ -407,7 +407,7 @@ Signed-off-by: David S. Miller MT7531_MIRROR_MASK : MIRROR_MASK) /* Registers for BPDU and PAE frame control*/ -@@ -322,9 +323,8 @@ enum mt7530_vlan_port_acc_frm { +@@ -332,9 +333,8 @@ enum mt7530_vlan_port_acc_frm { MT7531_FORCE_DPX | \ MT7531_FORCE_RX_FC | \ MT7531_FORCE_TX_FC) diff --git a/target/linux/generic/backport-6.1/790-15-v6.4-net-dsa-mt7530-fix-support-for-MT7531BE.patch b/target/linux/generic/backport-6.1/790-15-v6.4-net-dsa-mt7530-fix-support-for-MT7531BE.patch index ef2d07ab79..40209b0305 100644 --- a/target/linux/generic/backport-6.1/790-15-v6.4-net-dsa-mt7530-fix-support-for-MT7531BE.patch +++ b/target/linux/generic/backport-6.1/790-15-v6.4-net-dsa-mt7530-fix-support-for-MT7531BE.patch @@ -73,7 +73,7 @@ Signed-off-by: Jakub Kicinski } --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -3081,6 +3081,12 @@ mt753x_setup(struct dsa_switch *ds) +@@ -3269,6 +3269,12 @@ mt753x_setup(struct dsa_switch *ds) if (ret && priv->irq) mt7530_free_irq_common(priv); @@ -88,7 +88,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h -@@ -768,10 +768,10 @@ struct mt753x_info { +@@ -779,10 +779,10 @@ struct mt753x_info { * registers * @p6_interface Holding the current port 6 interface * @p5_intf_sel: Holding the current port 5 interface select @@ -100,7 +100,7 @@ Signed-off-by: Jakub Kicinski */ struct mt7530_priv { struct device *dev; -@@ -790,7 +790,6 @@ struct mt7530_priv { +@@ -801,7 +801,6 @@ struct mt7530_priv { unsigned int p5_intf_sel; u8 mirror_rx; u8 mirror_tx; @@ -108,7 +108,7 @@ Signed-off-by: Jakub Kicinski struct mt7530_port ports[MT7530_NUM_PORTS]; struct mt753x_pcs pcs[MT7530_NUM_PORTS]; /* protect among processes for registers access*/ -@@ -798,6 +797,7 @@ struct mt7530_priv { +@@ -809,6 +808,7 @@ struct mt7530_priv { int irq; struct irq_domain *irq_domain; u32 irq_enable; diff --git a/target/linux/generic/backport-6.1/790-16-v6.4-net-dsa-mt7530-set-all-CPU-ports-in-MT7531_CPU_PMAP.patch b/target/linux/generic/backport-6.1/790-16-v6.4-net-dsa-mt7530-set-all-CPU-ports-in-MT7531_CPU_PMAP.patch deleted file mode 100644 index 068fb38a4e..0000000000 --- a/target/linux/generic/backport-6.1/790-16-v6.4-net-dsa-mt7530-set-all-CPU-ports-in-MT7531_CPU_PMAP.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 4b11e3eb0eb7245a0d22a5dc4161c54eea42910c Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= -Date: Sat, 17 Jun 2023 09:26:44 +0300 -Subject: [PATCH 16/48] net: dsa: mt7530: set all CPU ports in MT7531_CPU_PMAP -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -MT7531_CPU_PMAP represents the destination port mask for trapped-to-CPU -frames (further restricted by PCR_MATRIX). - -Currently the driver sets the first CPU port as the single port in this bit -mask, which works fine regardless of whether the device tree defines port -5, 6 or 5+6 as CPU ports. This is because the logic coincides with DSA's -logic of picking the first CPU port as the CPU port that all user ports are -affine to, by default. - -An upcoming change would like to influence DSA's selection of the default -CPU port to no longer be the first one, and in that case, this logic needs -adaptation. - -Since there is no observed leakage or duplication of frames if all CPU -ports are defined in this bit mask, simply include them all. - -Suggested-by: Russell King (Oracle) -Suggested-by: Vladimir Oltean -Signed-off-by: Arınç ÜNAL -Reviewed-by: Vladimir Oltean -Reviewed-by: Russell King (Oracle) -Reviewed-by: Florian Fainelli -Signed-off-by: David S. Miller ---- - drivers/net/dsa/mt7530.c | 15 +++++++-------- - drivers/net/dsa/mt7530.h | 1 + - 2 files changed, 8 insertions(+), 8 deletions(-) - ---- a/drivers/net/dsa/mt7530.c -+++ b/drivers/net/dsa/mt7530.c -@@ -1069,6 +1069,13 @@ mt753x_cpu_port_enable(struct dsa_switch - if (priv->id == ID_MT7530 || priv->id == ID_MT7621) - mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); - -+ /* Add the CPU port to the CPU port bitmap for MT7531 and the switch on -+ * the MT7988 SoC. Trapped frames will be forwarded to the CPU port that -+ * is affine to the inbound user port. -+ */ -+ if (priv->id == ID_MT7531 || priv->id == ID_MT7988) -+ mt7530_set(priv, MT7531_CFC, MT7531_CPU_PMAP(BIT(port))); -+ - /* CPU port gets connected to all user ports of - * the switch. - */ -@@ -2411,16 +2418,8 @@ static int - mt7531_setup_common(struct dsa_switch *ds) - { - struct mt7530_priv *priv = ds->priv; -- struct dsa_port *cpu_dp; - int ret, i; - -- /* BPDU to CPU port */ -- dsa_switch_for_each_cpu_port(cpu_dp, ds) { -- mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK, -- BIT(cpu_dp->index)); -- break; -- } -- - mt753x_trap_frames(priv); - - /* Enable and reset MIB counters */ ---- a/drivers/net/dsa/mt7530.h -+++ b/drivers/net/dsa/mt7530.h -@@ -54,6 +54,7 @@ enum mt753x_id { - #define MT7531_MIRROR_PORT_GET(x) (((x) >> 16) & MIRROR_MASK) - #define MT7531_MIRROR_PORT_SET(x) (((x) & MIRROR_MASK) << 16) - #define MT7531_CPU_PMAP_MASK GENMASK(7, 0) -+#define MT7531_CPU_PMAP(x) FIELD_PREP(MT7531_CPU_PMAP_MASK, x) - - #define MT753X_MIRROR_REG(id) ((((id) == ID_MT7531) || ((id) == ID_MT7988)) ? \ - MT7531_CFC : MT7530_MFC) diff --git a/target/linux/generic/backport-6.1/790-17-v6.5-net-dsa-mt7530-update-PCS-driver-to-use-neg_mode.patch b/target/linux/generic/backport-6.1/790-17-v6.5-net-dsa-mt7530-update-PCS-driver-to-use-neg_mode.patch index bbf6d9b16f..78e332b1c2 100644 --- a/target/linux/generic/backport-6.1/790-17-v6.5-net-dsa-mt7530-update-PCS-driver-to-use-neg_mode.patch +++ b/target/linux/generic/backport-6.1/790-17-v6.5-net-dsa-mt7530-update-PCS-driver-to-use-neg_mode.patch @@ -16,7 +16,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -3036,7 +3036,7 @@ static void mt7530_pcs_get_state(struct +@@ -3225,7 +3225,7 @@ static void mt7530_pcs_get_state(struct state->pause |= MLO_PAUSE_TX; } @@ -25,7 +25,7 @@ Signed-off-by: Jakub Kicinski phy_interface_t interface, const unsigned long *advertising, bool permit_pause_to_mac) -@@ -3064,6 +3064,7 @@ mt753x_setup(struct dsa_switch *ds) +@@ -3253,6 +3253,7 @@ mt753x_setup(struct dsa_switch *ds) /* Initialise the PCS devices */ for (i = 0; i < priv->ds->num_ports; i++) { priv->pcs[i].pcs.ops = priv->info->pcs_ops; diff --git a/target/linux/generic/backport-6.1/790-19-v6.7-net-dsa-mt753x-remove-mt753x_phylink_pcs_link_up.patch b/target/linux/generic/backport-6.1/790-19-v6.7-net-dsa-mt753x-remove-mt753x_phylink_pcs_link_up.patch index e9a36eea41..d69ee7f104 100644 --- a/target/linux/generic/backport-6.1/790-19-v6.7-net-dsa-mt753x-remove-mt753x_phylink_pcs_link_up.patch +++ b/target/linux/generic/backport-6.1/790-19-v6.7-net-dsa-mt753x-remove-mt753x_phylink_pcs_link_up.patch @@ -24,7 +24,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2851,15 +2851,6 @@ static void mt753x_phylink_mac_link_down +@@ -3040,15 +3040,6 @@ static void mt753x_phylink_mac_link_down mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); } @@ -40,7 +40,7 @@ Signed-off-by: Jakub Kicinski static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface, -@@ -2948,8 +2939,6 @@ mt7531_cpu_port_config(struct dsa_switch +@@ -3137,8 +3128,6 @@ mt7531_cpu_port_config(struct dsa_switch return ret; mt7530_write(priv, MT7530_PMCR_P(port), PMCR_CPU_PORT_SETTING(priv->id)); diff --git a/target/linux/generic/backport-6.1/790-20-v6.7-net-dsa-mt7530-replace-deprecated-strncpy-with-ethto.patch b/target/linux/generic/backport-6.1/790-20-v6.7-net-dsa-mt7530-replace-deprecated-strncpy-with-ethto.patch index e8fec3f6a1..8af6820270 100644 --- a/target/linux/generic/backport-6.1/790-20-v6.7-net-dsa-mt7530-replace-deprecated-strncpy-with-ethto.patch +++ b/target/linux/generic/backport-6.1/790-20-v6.7-net-dsa-mt7530-replace-deprecated-strncpy-with-ethto.patch @@ -28,7 +28,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -829,8 +829,7 @@ mt7530_get_strings(struct dsa_switch *ds +@@ -843,8 +843,7 @@ mt7530_get_strings(struct dsa_switch *ds return; for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++) diff --git a/target/linux/generic/backport-6.1/790-21-v6.9-net-dsa-mt7530-support-OF-based-registration-of-swit.patch b/target/linux/generic/backport-6.1/790-21-v6.9-net-dsa-mt7530-support-OF-based-registration-of-swit.patch index 8b374679ca..4c6c057739 100644 --- a/target/linux/generic/backport-6.1/790-21-v6.9-net-dsa-mt7530-support-OF-based-registration-of-swit.patch +++ b/target/linux/generic/backport-6.1/790-21-v6.9-net-dsa-mt7530-support-OF-based-registration-of-swit.patch @@ -46,7 +46,7 @@ Signed-off-by: Paolo Abeni --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2175,24 +2175,40 @@ mt7530_free_irq_common(struct mt7530_pri +@@ -2350,24 +2350,40 @@ mt7530_free_irq_common(struct mt7530_pri static void mt7530_free_irq(struct mt7530_priv *priv) { @@ -92,7 +92,7 @@ Signed-off-by: Paolo Abeni bus->priv = priv; bus->name = KBUILD_MODNAME "-mii"; snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++); -@@ -2201,16 +2217,18 @@ mt7530_setup_mdio(struct mt7530_priv *pr +@@ -2376,16 +2392,18 @@ mt7530_setup_mdio(struct mt7530_priv *pr bus->parent = dev; bus->phy_mask = ~ds->phys_mii_mask; diff --git a/target/linux/generic/backport-6.1/790-22-v6.8-net-dsa-mt7530-fix-10M-100M-speed-on-MT7988-switch.patch b/target/linux/generic/backport-6.1/790-22-v6.8-net-dsa-mt7530-fix-10M-100M-speed-on-MT7988-switch.patch index 381902472c..0b141b4a3f 100644 --- a/target/linux/generic/backport-6.1/790-22-v6.8-net-dsa-mt7530-fix-10M-100M-speed-on-MT7988-switch.patch +++ b/target/linux/generic/backport-6.1/790-22-v6.8-net-dsa-mt7530-fix-10M-100M-speed-on-MT7988-switch.patch @@ -22,7 +22,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2883,8 +2883,7 @@ static void mt753x_phylink_mac_link_up(s +@@ -3072,8 +3072,7 @@ static void mt753x_phylink_mac_link_up(s /* MT753x MAC works in 1G full duplex mode for all up-clocked * variants. */ diff --git a/target/linux/generic/backport-6.1/790-23-v6.9-net-dsa-mt7530-always-trap-frames-to-active-CPU-port.patch b/target/linux/generic/backport-6.1/790-23-v6.9-net-dsa-mt7530-always-trap-frames-to-active-CPU-port.patch index c3f55f8106..44d8e07c12 100644 --- a/target/linux/generic/backport-6.1/790-23-v6.9-net-dsa-mt7530-always-trap-frames-to-active-CPU-port.patch +++ b/target/linux/generic/backport-6.1/790-23-v6.9-net-dsa-mt7530-always-trap-frames-to-active-CPU-port.patch @@ -38,7 +38,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -1064,10 +1064,6 @@ mt753x_cpu_port_enable(struct dsa_switch +@@ -1239,10 +1239,6 @@ mt753x_cpu_port_enable(struct dsa_switch mt7530_set(priv, MT7530_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) | UNU_FFP(BIT(port))); @@ -46,10 +46,10 @@ Signed-off-by: Jakub Kicinski - if (priv->id == ID_MT7530 || priv->id == ID_MT7621) - mt7530_rmw(priv, MT7530_MFC, CPU_MASK, CPU_EN | CPU_PORT(port)); - - /* Add the CPU port to the CPU port bitmap for MT7531 and the switch on - * the MT7988 SoC. Trapped frames will be forwarded to the CPU port that - * is affine to the inbound user port. -@@ -3125,6 +3121,36 @@ static int mt753x_set_mac_eee(struct dsa + /* Add the CPU port to the CPU port bitmap for MT7531. Trapped frames + * will be forwarded to the CPU port that is affine to the inbound user + * port. +@@ -3314,6 +3310,36 @@ static int mt753x_set_mac_eee(struct dsa return 0; } @@ -86,7 +86,7 @@ Signed-off-by: Jakub Kicinski static int mt7988_pad_setup(struct dsa_switch *ds, phy_interface_t interface) { return 0; -@@ -3179,6 +3205,7 @@ const struct dsa_switch_ops mt7530_switc +@@ -3369,6 +3395,7 @@ const struct dsa_switch_ops mt7530_switc .phylink_mac_link_up = mt753x_phylink_mac_link_up, .get_mac_eee = mt753x_get_mac_eee, .set_mac_eee = mt753x_set_mac_eee, @@ -96,7 +96,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h -@@ -41,8 +41,8 @@ enum mt753x_id { +@@ -45,8 +45,8 @@ enum mt753x_id { #define UNU_FFP(x) (((x) & 0xff) << 8) #define UNU_FFP_MASK UNU_FFP(~0) #define CPU_EN BIT(7) @@ -107,7 +107,7 @@ Signed-off-by: Jakub Kicinski #define MIRROR_EN BIT(3) #define MIRROR_PORT(x) ((x) & 0x7) #define MIRROR_MASK 0x7 -@@ -773,6 +773,7 @@ struct mt753x_info { +@@ -783,6 +783,7 @@ struct mt753x_info { * @irq_domain: IRQ domain of the switch irq_chip * @irq_enable: IRQ enable bits, synced to SYS_INT_EN * @create_sgmii: Pointer to function creating SGMII PCS instance(s) @@ -115,7 +115,7 @@ Signed-off-by: Jakub Kicinski */ struct mt7530_priv { struct device *dev; -@@ -799,6 +800,7 @@ struct mt7530_priv { +@@ -809,6 +810,7 @@ struct mt7530_priv { struct irq_domain *irq_domain; u32 irq_enable; int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii); diff --git a/target/linux/generic/backport-6.1/790-24-v6.9-net-dsa-mt7530-use-p5_interface_select-as-data-type-.patch b/target/linux/generic/backport-6.1/790-24-v6.9-net-dsa-mt7530-use-p5_interface_select-as-data-type-.patch index 35abed6b03..3454948b86 100644 --- a/target/linux/generic/backport-6.1/790-24-v6.9-net-dsa-mt7530-use-p5_interface_select-as-data-type-.patch +++ b/target/linux/generic/backport-6.1/790-24-v6.9-net-dsa-mt7530-use-p5_interface_select-as-data-type-.patch @@ -25,7 +25,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h -@@ -703,7 +703,7 @@ struct mt7530_port { +@@ -713,7 +713,7 @@ struct mt7530_port { /* Port 5 interface select definitions */ enum p5_interface_select { @@ -34,7 +34,7 @@ Signed-off-by: Jakub Kicinski P5_INTF_SEL_PHY_P0, P5_INTF_SEL_PHY_P4, P5_INTF_SEL_GMAC5, -@@ -789,7 +789,7 @@ struct mt7530_priv { +@@ -799,7 +799,7 @@ struct mt7530_priv { bool mcm; phy_interface_t p6_interface; phy_interface_t p5_interface; diff --git a/target/linux/generic/backport-6.1/790-25-v6.9-net-dsa-mt7530-store-port-5-SGMII-capability-of-MT75.patch b/target/linux/generic/backport-6.1/790-25-v6.9-net-dsa-mt7530-store-port-5-SGMII-capability-of-MT75.patch index 03329f8ba8..357579e2bd 100644 --- a/target/linux/generic/backport-6.1/790-25-v6.9-net-dsa-mt7530-store-port-5-SGMII-capability-of-MT75.patch +++ b/target/linux/generic/backport-6.1/790-25-v6.9-net-dsa-mt7530-store-port-5-SGMII-capability-of-MT75.patch @@ -65,7 +65,7 @@ Signed-off-by: Jakub Kicinski GFP_KERNEL); --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -473,15 +473,6 @@ mt7530_pad_clk_setup(struct dsa_switch * +@@ -487,15 +487,6 @@ mt7530_pad_clk_setup(struct dsa_switch * return 0; } @@ -81,7 +81,7 @@ Signed-off-by: Jakub Kicinski static int mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface) { -@@ -496,9 +487,6 @@ mt7531_pll_setup(struct mt7530_priv *pri +@@ -510,9 +501,6 @@ mt7531_pll_setup(struct mt7530_priv *pri u32 xtal; u32 val; @@ -91,7 +91,7 @@ Signed-off-by: Jakub Kicinski val = mt7530_read(priv, MT7531_CREV); top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR); hwstrap = mt7530_read(priv, MT7531_HWTRAP); -@@ -913,8 +901,6 @@ static const char *p5_intf_modes(unsigne +@@ -927,8 +915,6 @@ static const char *p5_intf_modes(unsigne return "PHY P4"; case P5_INTF_SEL_GMAC5: return "GMAC5"; @@ -100,7 +100,7 @@ Signed-off-by: Jakub Kicinski default: return "unknown"; } -@@ -2515,6 +2501,12 @@ mt7531_setup(struct dsa_switch *ds) +@@ -2697,6 +2683,12 @@ mt7531_setup(struct dsa_switch *ds) return -ENODEV; } @@ -113,7 +113,7 @@ Signed-off-by: Jakub Kicinski /* all MACs must be forced link-down before sw reset */ for (i = 0; i < MT7530_NUM_PORTS; i++) mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK); -@@ -2524,21 +2516,18 @@ mt7531_setup(struct dsa_switch *ds) +@@ -2706,21 +2698,18 @@ mt7531_setup(struct dsa_switch *ds) SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | SYS_CTRL_REG_RST); @@ -141,7 +141,7 @@ Signed-off-by: Jakub Kicinski mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK, MT7531_GPIO0_INTERRUPT); -@@ -2598,11 +2587,6 @@ static void mt7530_mac_port_get_caps(str +@@ -2787,11 +2776,6 @@ static void mt7530_mac_port_get_caps(str } } @@ -153,7 +153,7 @@ Signed-off-by: Jakub Kicinski static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { -@@ -2615,7 +2599,7 @@ static void mt7531_mac_port_get_caps(str +@@ -2804,7 +2788,7 @@ static void mt7531_mac_port_get_caps(str break; case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */ @@ -162,7 +162,7 @@ Signed-off-by: Jakub Kicinski phy_interface_set_rgmii(config->supported_interfaces); break; } -@@ -2682,7 +2666,7 @@ static int mt7531_rgmii_setup(struct mt7 +@@ -2871,7 +2855,7 @@ static int mt7531_rgmii_setup(struct mt7 { u32 val; @@ -171,7 +171,7 @@ Signed-off-by: Jakub Kicinski dev_err(priv->dev, "RGMII mode is not available for port %d\n", port); return -EINVAL; -@@ -2925,7 +2909,7 @@ mt7531_cpu_port_config(struct dsa_switch +@@ -3114,7 +3098,7 @@ mt7531_cpu_port_config(struct dsa_switch switch (port) { case 5: @@ -180,7 +180,7 @@ Signed-off-by: Jakub Kicinski interface = PHY_INTERFACE_MODE_RGMII; else interface = PHY_INTERFACE_MODE_2500BASEX; -@@ -3083,7 +3067,7 @@ mt753x_setup(struct dsa_switch *ds) +@@ -3272,7 +3256,7 @@ mt753x_setup(struct dsa_switch *ds) mt7530_free_irq_common(priv); if (priv->create_sgmii) { @@ -191,7 +191,7 @@ Signed-off-by: Jakub Kicinski } --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h -@@ -707,7 +707,6 @@ enum p5_interface_select { +@@ -717,7 +717,6 @@ enum p5_interface_select { P5_INTF_SEL_PHY_P0, P5_INTF_SEL_PHY_P4, P5_INTF_SEL_GMAC5, @@ -199,7 +199,7 @@ Signed-off-by: Jakub Kicinski }; struct mt7530_priv; -@@ -769,6 +768,8 @@ struct mt753x_info { +@@ -779,6 +778,8 @@ struct mt753x_info { * registers * @p6_interface Holding the current port 6 interface * @p5_intf_sel: Holding the current port 5 interface select @@ -208,7 +208,7 @@ Signed-off-by: Jakub Kicinski * @irq: IRQ number of the switch * @irq_domain: IRQ domain of the switch irq_chip * @irq_enable: IRQ enable bits, synced to SYS_INT_EN -@@ -790,6 +791,7 @@ struct mt7530_priv { +@@ -800,6 +801,7 @@ struct mt7530_priv { phy_interface_t p6_interface; phy_interface_t p5_interface; enum p5_interface_select p5_intf_sel; @@ -216,7 +216,7 @@ Signed-off-by: Jakub Kicinski u8 mirror_rx; u8 mirror_tx; struct mt7530_port ports[MT7530_NUM_PORTS]; -@@ -799,7 +801,7 @@ struct mt7530_priv { +@@ -809,7 +811,7 @@ struct mt7530_priv { int irq; struct irq_domain *irq_domain; u32 irq_enable; diff --git a/target/linux/generic/backport-6.1/790-26-v6.9-net-dsa-mt7530-improve-comments-regarding-switch-por.patch b/target/linux/generic/backport-6.1/790-26-v6.9-net-dsa-mt7530-improve-comments-regarding-switch-por.patch index 1489c4f2f3..46dbd53ede 100644 --- a/target/linux/generic/backport-6.1/790-26-v6.9-net-dsa-mt7530-improve-comments-regarding-switch-por.patch +++ b/target/linux/generic/backport-6.1/790-26-v6.9-net-dsa-mt7530-improve-comments-regarding-switch-por.patch @@ -37,7 +37,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2565,12 +2565,14 @@ static void mt7530_mac_port_get_caps(str +@@ -2754,12 +2754,14 @@ static void mt7530_mac_port_get_caps(str struct phylink_config *config) { switch (port) { @@ -54,7 +54,7 @@ Signed-off-by: Jakub Kicinski phy_interface_set_rgmii(config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces); -@@ -2578,7 +2580,8 @@ static void mt7530_mac_port_get_caps(str +@@ -2767,7 +2769,8 @@ static void mt7530_mac_port_get_caps(str config->supported_interfaces); break; @@ -64,7 +64,7 @@ Signed-off-by: Jakub Kicinski __set_bit(PHY_INTERFACE_MODE_RGMII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_TRGMII, -@@ -2593,19 +2596,24 @@ static void mt7531_mac_port_get_caps(str +@@ -2782,19 +2785,24 @@ static void mt7531_mac_port_get_caps(str struct mt7530_priv *priv = ds->priv; switch (port) { @@ -92,7 +92,7 @@ Signed-off-by: Jakub Kicinski __set_bit(PHY_INTERFACE_MODE_SGMII, config->supported_interfaces); __set_bit(PHY_INTERFACE_MODE_1000BASEX, -@@ -2624,11 +2632,13 @@ static void mt7988_mac_port_get_caps(str +@@ -2813,11 +2821,13 @@ static void mt7988_mac_port_get_caps(str phy_interface_zero(config->supported_interfaces); switch (port) { @@ -107,7 +107,7 @@ Signed-off-by: Jakub Kicinski case 6: __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); -@@ -2792,12 +2802,12 @@ mt753x_phylink_mac_config(struct dsa_swi +@@ -2981,12 +2991,12 @@ mt753x_phylink_mac_config(struct dsa_swi u32 mcr_cur, mcr_new; switch (port) { @@ -122,7 +122,7 @@ Signed-off-by: Jakub Kicinski if (priv->p5_interface == state->interface) break; -@@ -2807,7 +2817,7 @@ mt753x_phylink_mac_config(struct dsa_swi +@@ -2996,7 +3006,7 @@ mt753x_phylink_mac_config(struct dsa_swi if (priv->p5_intf_sel != P5_DISABLED) priv->p5_interface = state->interface; break; diff --git a/target/linux/generic/backport-6.1/790-27-v6.9-net-dsa-mt7530-improve-code-path-for-setting-up-port.patch b/target/linux/generic/backport-6.1/790-27-v6.9-net-dsa-mt7530-improve-code-path-for-setting-up-port.patch index 6fbf259735..43f629b243 100644 --- a/target/linux/generic/backport-6.1/790-27-v6.9-net-dsa-mt7530-improve-code-path-for-setting-up-port.patch +++ b/target/linux/generic/backport-6.1/790-27-v6.9-net-dsa-mt7530-improve-code-path-for-setting-up-port.patch @@ -52,7 +52,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2353,16 +2353,15 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2532,16 +2532,15 @@ mt7530_setup(struct dsa_switch *ds) return ret; /* Setup port 5 */ @@ -75,7 +75,7 @@ Signed-off-by: Jakub Kicinski for_each_child_of_node(dn, mac_np) { if (!of_device_is_compatible(mac_np, "mediatek,eth-mac")) -@@ -2393,6 +2392,8 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2572,6 +2571,8 @@ mt7530_setup(struct dsa_switch *ds) of_node_put(phy_node); break; } @@ -84,7 +84,7 @@ Signed-off-by: Jakub Kicinski } #ifdef CONFIG_GPIOLIB -@@ -2403,8 +2404,6 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2582,8 +2583,6 @@ mt7530_setup(struct dsa_switch *ds) } #endif /* CONFIG_GPIOLIB */ diff --git a/target/linux/generic/backport-6.1/790-28-v6.9-net-dsa-mt7530-do-not-set-priv-p5_interface-on-mt753.patch b/target/linux/generic/backport-6.1/790-28-v6.9-net-dsa-mt7530-do-not-set-priv-p5_interface-on-mt753.patch index 94692d948f..385d587729 100644 --- a/target/linux/generic/backport-6.1/790-28-v6.9-net-dsa-mt7530-do-not-set-priv-p5_interface-on-mt753.patch +++ b/target/linux/generic/backport-6.1/790-28-v6.9-net-dsa-mt7530-do-not-set-priv-p5_interface-on-mt753.patch @@ -31,7 +31,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -971,8 +971,6 @@ static void mt7530_setup_port5(struct ds +@@ -985,8 +985,6 @@ static void mt7530_setup_port5(struct ds dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n", val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface)); diff --git a/target/linux/generic/backport-6.1/790-29-v6.9-net-dsa-mt7530-do-not-run-mt7530_setup_port5-if-port.patch b/target/linux/generic/backport-6.1/790-29-v6.9-net-dsa-mt7530-do-not-run-mt7530_setup_port5-if-port.patch index c121eb4a35..b4c0b75c49 100644 --- a/target/linux/generic/backport-6.1/790-29-v6.9-net-dsa-mt7530-do-not-run-mt7530_setup_port5-if-port.patch +++ b/target/linux/generic/backport-6.1/790-29-v6.9-net-dsa-mt7530-do-not-run-mt7530_setup_port5-if-port.patch @@ -30,7 +30,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -935,9 +935,6 @@ static void mt7530_setup_port5(struct ds +@@ -949,9 +949,6 @@ static void mt7530_setup_port5(struct ds /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */ val &= ~MHWTRAP_P5_DIS; break; @@ -40,7 +40,7 @@ Signed-off-by: Jakub Kicinski default: dev_err(ds->dev, "Unsupported p5_intf_sel %d\n", priv->p5_intf_sel); -@@ -2358,8 +2355,6 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2537,8 +2534,6 @@ mt7530_setup(struct dsa_switch *ds) * Set priv->p5_intf_sel to the appropriate value if PHY muxing * is detected. */ @@ -49,7 +49,7 @@ Signed-off-by: Jakub Kicinski for_each_child_of_node(dn, mac_np) { if (!of_device_is_compatible(mac_np, "mediatek,eth-mac")) -@@ -2391,7 +2386,9 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2570,7 +2565,9 @@ mt7530_setup(struct dsa_switch *ds) break; } diff --git a/target/linux/generic/backport-6.1/790-30-v6.9-net-dsa-mt7530-empty-default-case-on-mt7530_setup_po.patch b/target/linux/generic/backport-6.1/790-30-v6.9-net-dsa-mt7530-empty-default-case-on-mt7530_setup_po.patch index 9b610e0bdb..89527e2b39 100644 --- a/target/linux/generic/backport-6.1/790-30-v6.9-net-dsa-mt7530-empty-default-case-on-mt7530_setup_po.patch +++ b/target/linux/generic/backport-6.1/790-30-v6.9-net-dsa-mt7530-empty-default-case-on-mt7530_setup_po.patch @@ -37,7 +37,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -936,9 +936,7 @@ static void mt7530_setup_port5(struct ds +@@ -950,9 +950,7 @@ static void mt7530_setup_port5(struct ds val &= ~MHWTRAP_P5_DIS; break; default: @@ -48,7 +48,7 @@ Signed-off-by: Jakub Kicinski } /* Setup RGMII settings */ -@@ -968,7 +966,6 @@ static void mt7530_setup_port5(struct ds +@@ -982,7 +980,6 @@ static void mt7530_setup_port5(struct ds dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, intf_sel=%s, phy-mode=%s\n", val, p5_intf_modes(priv->p5_intf_sel), phy_modes(interface)); diff --git a/target/linux/generic/backport-6.1/790-31-v6.9-net-dsa-mt7530-move-XTAL-check-to-mt7530_setup.patch b/target/linux/generic/backport-6.1/790-31-v6.9-net-dsa-mt7530-move-XTAL-check-to-mt7530_setup.patch index dba1cb734e..0dc4baf0c7 100644 --- a/target/linux/generic/backport-6.1/790-31-v6.9-net-dsa-mt7530-move-XTAL-check-to-mt7530_setup.patch +++ b/target/linux/generic/backport-6.1/790-31-v6.9-net-dsa-mt7530-move-XTAL-check-to-mt7530_setup.patch @@ -24,7 +24,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -408,13 +408,6 @@ mt7530_pad_clk_setup(struct dsa_switch * +@@ -422,13 +422,6 @@ mt7530_pad_clk_setup(struct dsa_switch * xtal = mt7530_read(priv, MT7530_MHWTRAP) & HWTRAP_XTAL_MASK; @@ -38,7 +38,7 @@ Signed-off-by: Jakub Kicinski switch (interface) { case PHY_INTERFACE_MODE_RGMII: trgint = 0; -@@ -2286,6 +2279,12 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2461,6 +2454,12 @@ mt7530_setup(struct dsa_switch *ds) return -ENODEV; } diff --git a/target/linux/generic/backport-6.1/790-32-v6.9-net-dsa-mt7530-simplify-mt7530_pad_clk_setup.patch b/target/linux/generic/backport-6.1/790-32-v6.9-net-dsa-mt7530-simplify-mt7530_pad_clk_setup.patch index 90f8e095ef..46e1b50f24 100644 --- a/target/linux/generic/backport-6.1/790-32-v6.9-net-dsa-mt7530-simplify-mt7530_pad_clk_setup.patch +++ b/target/linux/generic/backport-6.1/790-32-v6.9-net-dsa-mt7530-simplify-mt7530_pad_clk_setup.patch @@ -38,7 +38,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -404,65 +404,54 @@ static int +@@ -418,65 +418,54 @@ static int mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) { struct mt7530_priv *priv = ds->priv; diff --git a/target/linux/generic/backport-6.1/790-33-v6.9-net-dsa-mt7530-call-port-6-setup-from-mt7530_mac_con.patch b/target/linux/generic/backport-6.1/790-33-v6.9-net-dsa-mt7530-call-port-6-setup-from-mt7530_mac_con.patch index 93eccc8637..7d78b7df70 100644 --- a/target/linux/generic/backport-6.1/790-33-v6.9-net-dsa-mt7530-call-port-6-setup-from-mt7530_mac_con.patch +++ b/target/linux/generic/backport-6.1/790-33-v6.9-net-dsa-mt7530-call-port-6-setup-from-mt7530_mac_con.patch @@ -47,7 +47,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -400,8 +400,8 @@ static void mt7530_pll_setup(struct mt75 +@@ -414,8 +414,8 @@ mt753x_preferred_default_local_cpu_port( } /* Setup port 6 interface mode and TRGMII TX circuit */ @@ -58,7 +58,7 @@ Signed-off-by: Jakub Kicinski { struct mt7530_priv *priv = ds->priv; u32 ncpo1, ssc_delta, xtal; -@@ -412,7 +412,7 @@ mt7530_pad_clk_setup(struct dsa_switch * +@@ -426,7 +426,7 @@ mt7530_pad_clk_setup(struct dsa_switch * if (interface == PHY_INTERFACE_MODE_RGMII) { mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(0)); @@ -67,7 +67,7 @@ Signed-off-by: Jakub Kicinski } mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1)); -@@ -451,7 +451,11 @@ mt7530_pad_clk_setup(struct dsa_switch * +@@ -465,7 +465,11 @@ mt7530_pad_clk_setup(struct dsa_switch * /* Enable the MT7530 TRGMII clocks */ core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); @@ -79,7 +79,7 @@ Signed-off-by: Jakub Kicinski return 0; } -@@ -2640,11 +2644,10 @@ mt7530_mac_config(struct dsa_switch *ds, +@@ -2829,11 +2833,10 @@ mt7530_mac_config(struct dsa_switch *ds, { struct mt7530_priv *priv = ds->priv; diff --git a/target/linux/generic/backport-6.1/790-34-v6.9-net-dsa-mt7530-remove-pad_setup-function-pointer.patch b/target/linux/generic/backport-6.1/790-34-v6.9-net-dsa-mt7530-remove-pad_setup-function-pointer.patch index a423c0899c..725830e769 100644 --- a/target/linux/generic/backport-6.1/790-34-v6.9-net-dsa-mt7530-remove-pad_setup-function-pointer.patch +++ b/target/linux/generic/backport-6.1/790-34-v6.9-net-dsa-mt7530-remove-pad_setup-function-pointer.patch @@ -28,7 +28,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -453,18 +453,6 @@ mt7530_setup_port6(struct dsa_switch *ds +@@ -467,18 +467,6 @@ mt7530_setup_port6(struct dsa_switch *ds core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); } @@ -47,7 +47,7 @@ Signed-off-by: Jakub Kicinski static void mt7531_pll_setup(struct mt7530_priv *priv) { -@@ -2631,14 +2619,6 @@ static void mt7988_mac_port_get_caps(str +@@ -2820,14 +2808,6 @@ static void mt7988_mac_port_get_caps(str } static int @@ -62,7 +62,7 @@ Signed-off-by: Jakub Kicinski mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { -@@ -2803,8 +2783,6 @@ mt753x_phylink_mac_config(struct dsa_swi +@@ -2992,8 +2972,6 @@ mt753x_phylink_mac_config(struct dsa_swi if (priv->p6_interface == state->interface) break; @@ -71,7 +71,7 @@ Signed-off-by: Jakub Kicinski if (mt753x_mac_config(ds, port, mode, state) < 0) goto unsupported; -@@ -3127,11 +3105,6 @@ mt753x_conduit_state_change(struct dsa_s +@@ -3316,11 +3294,6 @@ mt753x_conduit_state_change(struct dsa_s mt7530_rmw(priv, MT7530_MFC, CPU_EN | CPU_PORT_MASK, val); } @@ -83,7 +83,7 @@ Signed-off-by: Jakub Kicinski static int mt7988_setup(struct dsa_switch *ds) { struct mt7530_priv *priv = ds->priv; -@@ -3192,7 +3165,6 @@ const struct mt753x_info mt753x_table[] +@@ -3382,7 +3355,6 @@ const struct mt753x_info mt753x_table[] .sw_setup = mt7530_setup, .phy_read = mt7530_phy_read, .phy_write = mt7530_phy_write, @@ -91,7 +91,7 @@ Signed-off-by: Jakub Kicinski .mac_port_get_caps = mt7530_mac_port_get_caps, .mac_port_config = mt7530_mac_config, }, -@@ -3202,7 +3174,6 @@ const struct mt753x_info mt753x_table[] +@@ -3392,7 +3364,6 @@ const struct mt753x_info mt753x_table[] .sw_setup = mt7530_setup, .phy_read = mt7530_phy_read, .phy_write = mt7530_phy_write, @@ -99,7 +99,7 @@ Signed-off-by: Jakub Kicinski .mac_port_get_caps = mt7530_mac_port_get_caps, .mac_port_config = mt7530_mac_config, }, -@@ -3212,7 +3183,6 @@ const struct mt753x_info mt753x_table[] +@@ -3402,7 +3373,6 @@ const struct mt753x_info mt753x_table[] .sw_setup = mt7531_setup, .phy_read = mt7531_ind_phy_read, .phy_write = mt7531_ind_phy_write, @@ -107,7 +107,7 @@ Signed-off-by: Jakub Kicinski .cpu_port_config = mt7531_cpu_port_config, .mac_port_get_caps = mt7531_mac_port_get_caps, .mac_port_config = mt7531_mac_config, -@@ -3223,7 +3193,6 @@ const struct mt753x_info mt753x_table[] +@@ -3413,7 +3383,6 @@ const struct mt753x_info mt753x_table[] .sw_setup = mt7988_setup, .phy_read = mt7531_ind_phy_read, .phy_write = mt7531_ind_phy_write, @@ -115,7 +115,7 @@ Signed-off-by: Jakub Kicinski .cpu_port_config = mt7988_cpu_port_config, .mac_port_get_caps = mt7988_mac_port_get_caps, .mac_port_config = mt7988_mac_config, -@@ -3253,9 +3222,8 @@ mt7530_probe_common(struct mt7530_priv * +@@ -3443,9 +3412,8 @@ mt7530_probe_common(struct mt7530_priv * /* Sanity check if these required device operations are filled * properly. */ @@ -129,7 +129,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h -@@ -722,8 +722,6 @@ struct mt753x_pcs { +@@ -732,8 +732,6 @@ struct mt753x_pcs { * @sw_setup: Holding the handler to a device initialization * @phy_read: Holding the way reading PHY port * @phy_write: Holding the way writing PHY port @@ -138,7 +138,7 @@ Signed-off-by: Jakub Kicinski * @phy_mode_supported: Check if the PHY type is being supported on a certain * port * @mac_port_validate: Holding the way to set addition validate type for a -@@ -739,7 +737,6 @@ struct mt753x_info { +@@ -749,7 +747,6 @@ struct mt753x_info { int (*sw_setup)(struct dsa_switch *ds); int (*phy_read)(struct mt7530_priv *priv, int port, int regnum); int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val); diff --git a/target/linux/generic/backport-6.1/790-35-v6.9-net-dsa-mt7530-correct-port-capabilities-of-MT7988.patch b/target/linux/generic/backport-6.1/790-35-v6.9-net-dsa-mt7530-correct-port-capabilities-of-MT7988.patch index 3667dbf54a..606c48234c 100644 --- a/target/linux/generic/backport-6.1/790-35-v6.9-net-dsa-mt7530-correct-port-capabilities-of-MT7988.patch +++ b/target/linux/generic/backport-6.1/790-35-v6.9-net-dsa-mt7530-correct-port-capabilities-of-MT7988.patch @@ -25,7 +25,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2604,7 +2604,7 @@ static void mt7988_mac_port_get_caps(str +@@ -2793,7 +2793,7 @@ static void mt7988_mac_port_get_caps(str switch (port) { /* Ports which are connected to switch PHYs. There is no MII pinout. */ diff --git a/target/linux/generic/backport-6.1/790-36-v6.9-net-dsa-mt7530-do-not-clear-config-supported_interfa.patch b/target/linux/generic/backport-6.1/790-36-v6.9-net-dsa-mt7530-do-not-clear-config-supported_interfa.patch index 48433705f6..e2f1f23435 100644 --- a/target/linux/generic/backport-6.1/790-36-v6.9-net-dsa-mt7530-do-not-clear-config-supported_interfa.patch +++ b/target/linux/generic/backport-6.1/790-36-v6.9-net-dsa-mt7530-do-not-clear-config-supported_interfa.patch @@ -27,7 +27,7 @@ Signed-off-by: Jakub Kicinski --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2600,8 +2600,6 @@ static void mt7531_mac_port_get_caps(str +@@ -2789,8 +2789,6 @@ static void mt7531_mac_port_get_caps(str static void mt7988_mac_port_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { diff --git a/target/linux/generic/backport-6.1/790-37-v6.9-net-dsa-mt7530-remove-.mac_port_config-for-MT7988-an.patch b/target/linux/generic/backport-6.1/790-37-v6.9-net-dsa-mt7530-remove-.mac_port_config-for-MT7988-an.patch index b707de87ed..be6fe39f38 100644 --- a/target/linux/generic/backport-6.1/790-37-v6.9-net-dsa-mt7530-remove-.mac_port_config-for-MT7988-an.patch +++ b/target/linux/generic/backport-6.1/790-37-v6.9-net-dsa-mt7530-remove-.mac_port_config-for-MT7988-an.patch @@ -33,7 +33,7 @@ Signed-off-by: Paolo Abeni --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2683,17 +2683,6 @@ static bool mt753x_is_mac_port(u32 port) +@@ -2872,17 +2872,6 @@ static bool mt753x_is_mac_port(u32 port) } static int @@ -51,7 +51,7 @@ Signed-off-by: Paolo Abeni mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { -@@ -2733,6 +2722,9 @@ mt753x_mac_config(struct dsa_switch *ds, +@@ -2922,6 +2911,9 @@ mt753x_mac_config(struct dsa_switch *ds, { struct mt7530_priv *priv = ds->priv; @@ -61,7 +61,7 @@ Signed-off-by: Paolo Abeni return priv->info->mac_port_config(ds, port, mode, state->interface); } -@@ -3193,7 +3185,6 @@ const struct mt753x_info mt753x_table[] +@@ -3383,7 +3375,6 @@ const struct mt753x_info mt753x_table[] .phy_write = mt7531_ind_phy_write, .cpu_port_config = mt7988_cpu_port_config, .mac_port_get_caps = mt7988_mac_port_get_caps, @@ -69,7 +69,7 @@ Signed-off-by: Paolo Abeni }, }; EXPORT_SYMBOL_GPL(mt753x_table); -@@ -3221,8 +3212,7 @@ mt7530_probe_common(struct mt7530_priv * +@@ -3411,8 +3402,7 @@ mt7530_probe_common(struct mt7530_priv * * properly. */ if (!priv->info->sw_setup || !priv->info->phy_read || diff --git a/target/linux/generic/backport-6.1/790-38-v6.9-net-dsa-mt7530-set-interrupt-register-only-for-MT753.patch b/target/linux/generic/backport-6.1/790-38-v6.9-net-dsa-mt7530-set-interrupt-register-only-for-MT753.patch index 5dfb8bddbb..b8473ed128 100644 --- a/target/linux/generic/backport-6.1/790-38-v6.9-net-dsa-mt7530-set-interrupt-register-only-for-MT753.patch +++ b/target/linux/generic/backport-6.1/790-38-v6.9-net-dsa-mt7530-set-interrupt-register-only-for-MT753.patch @@ -20,7 +20,7 @@ Signed-off-by: Paolo Abeni --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2084,7 +2084,7 @@ mt7530_setup_irq(struct mt7530_priv *pri +@@ -2259,7 +2259,7 @@ mt7530_setup_irq(struct mt7530_priv *pri } /* This register must be set for MT7530 to properly fire interrupts */ diff --git a/target/linux/generic/backport-6.1/790-39-v6.9-net-dsa-mt7530-do-not-use-SW_PHY_RST-to-reset-MT7531.patch b/target/linux/generic/backport-6.1/790-39-v6.9-net-dsa-mt7530-do-not-use-SW_PHY_RST-to-reset-MT7531.patch index 565f16a47f..216a781087 100644 --- a/target/linux/generic/backport-6.1/790-39-v6.9-net-dsa-mt7530-do-not-use-SW_PHY_RST-to-reset-MT7531.patch +++ b/target/linux/generic/backport-6.1/790-39-v6.9-net-dsa-mt7530-do-not-use-SW_PHY_RST-to-reset-MT7531.patch @@ -22,7 +22,7 @@ Signed-off-by: Paolo Abeni --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2478,14 +2478,12 @@ mt7531_setup(struct dsa_switch *ds) +@@ -2660,14 +2660,12 @@ mt7531_setup(struct dsa_switch *ds) val = mt7530_read(priv, MT7531_TOP_SIG_SR); priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN); diff --git a/target/linux/generic/backport-6.1/790-40-v6.9-net-dsa-mt7530-get-rid-of-useless-error-returns-on-p.patch b/target/linux/generic/backport-6.1/790-40-v6.9-net-dsa-mt7530-get-rid-of-useless-error-returns-on-p.patch index d636e2d564..f920a6604d 100644 --- a/target/linux/generic/backport-6.1/790-40-v6.9-net-dsa-mt7530-get-rid-of-useless-error-returns-on-p.patch +++ b/target/linux/generic/backport-6.1/790-40-v6.9-net-dsa-mt7530-get-rid-of-useless-error-returns-on-p.patch @@ -36,7 +36,7 @@ Signed-off-by: Paolo Abeni --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2614,7 +2614,7 @@ static void mt7988_mac_port_get_caps(str +@@ -2803,7 +2803,7 @@ static void mt7988_mac_port_get_caps(str } } @@ -45,7 +45,7 @@ Signed-off-by: Paolo Abeni mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { -@@ -2624,22 +2624,14 @@ mt7530_mac_config(struct dsa_switch *ds, +@@ -2813,22 +2813,14 @@ mt7530_mac_config(struct dsa_switch *ds, mt7530_setup_port5(priv->ds, interface); else if (port == 6) mt7530_setup_port6(priv->ds, interface); @@ -71,7 +71,7 @@ Signed-off-by: Paolo Abeni val = mt7530_read(priv, MT7531_CLKGEN_CTRL); val |= GP_CLK_EN; val &= ~GP_MODE_MASK; -@@ -2667,20 +2659,14 @@ static int mt7531_rgmii_setup(struct mt7 +@@ -2856,20 +2848,14 @@ static int mt7531_rgmii_setup(struct mt7 case PHY_INTERFACE_MODE_RGMII_ID: break; default: @@ -95,7 +95,7 @@ Signed-off-by: Paolo Abeni mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode, phy_interface_t interface) { -@@ -2688,42 +2674,21 @@ mt7531_mac_config(struct dsa_switch *ds, +@@ -2877,42 +2863,21 @@ mt7531_mac_config(struct dsa_switch *ds, struct phy_device *phydev; struct dsa_port *dp; @@ -143,7 +143,7 @@ Signed-off-by: Paolo Abeni } static struct phylink_pcs * -@@ -2752,17 +2717,11 @@ mt753x_phylink_mac_config(struct dsa_swi +@@ -2941,17 +2906,11 @@ mt753x_phylink_mac_config(struct dsa_swi u32 mcr_cur, mcr_new; switch (port) { @@ -162,7 +162,7 @@ Signed-off-by: Paolo Abeni if (priv->p5_intf_sel != P5_DISABLED) priv->p5_interface = state->interface; -@@ -2771,16 +2730,10 @@ mt753x_phylink_mac_config(struct dsa_swi +@@ -2960,16 +2919,10 @@ mt753x_phylink_mac_config(struct dsa_swi if (priv->p6_interface == state->interface) break; @@ -180,7 +180,7 @@ Signed-off-by: Paolo Abeni } mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); -@@ -2863,7 +2816,6 @@ mt7531_cpu_port_config(struct dsa_switch +@@ -3052,7 +3005,6 @@ mt7531_cpu_port_config(struct dsa_switch struct mt7530_priv *priv = ds->priv; phy_interface_t interface; int speed; @@ -188,7 +188,7 @@ Signed-off-by: Paolo Abeni switch (port) { case 5: -@@ -2888,9 +2840,8 @@ mt7531_cpu_port_config(struct dsa_switch +@@ -3077,9 +3029,8 @@ mt7531_cpu_port_config(struct dsa_switch else speed = SPEED_1000; @@ -202,7 +202,7 @@ Signed-off-by: Paolo Abeni mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL, --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h -@@ -743,9 +743,9 @@ struct mt753x_info { +@@ -753,9 +753,9 @@ struct mt753x_info { void (*mac_port_validate)(struct dsa_switch *ds, int port, phy_interface_t interface, unsigned long *supported); diff --git a/target/linux/generic/backport-6.1/790-41-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch b/target/linux/generic/backport-6.1/790-41-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch index 60b369c8f8..eb0a5706ec 100644 --- a/target/linux/generic/backport-6.1/790-41-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch +++ b/target/linux/generic/backport-6.1/790-41-v6.9-net-dsa-mt7530-get-rid-of-priv-info-cpu_port_config.patch @@ -57,8 +57,8 @@ Signed-off-by: Paolo Abeni --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -995,18 +995,10 @@ mt753x_trap_frames(struct mt7530_priv *p - MT753X_BPDU_CPU_ONLY); +@@ -1170,18 +1170,10 @@ mt753x_trap_frames(struct mt7530_priv *p + MT753X_BPDU_CPU_ONLY); } -static int @@ -77,7 +77,7 @@ Signed-off-by: Paolo Abeni /* Enable Mediatek header mode on the cpu port */ mt7530_write(priv, MT7530_PVC_P(port), -@@ -1032,8 +1024,6 @@ mt753x_cpu_port_enable(struct dsa_switch +@@ -1207,8 +1199,6 @@ mt753x_cpu_port_enable(struct dsa_switch /* Set to fallback mode for independent VLAN learning */ mt7530_rmw(priv, MT7530_PCR_P(port), PCR_PORT_VLAN_MASK, MT7530_PORT_FALLBACK_MODE); @@ -86,16 +86,16 @@ Signed-off-by: Paolo Abeni } static int -@@ -2288,8 +2278,6 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2461,8 +2451,6 @@ mt7530_setup(struct dsa_switch *ds) val |= MHWTRAP_MANUAL; mt7530_write(priv, MT7530_MHWTRAP, val); - priv->p6_interface = PHY_INTERFACE_MODE_NA; - - mt753x_trap_frames(priv); + if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ) + mt7530_pll_setup(priv); - /* Enable and reset MIB counters */ -@@ -2304,9 +2292,7 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2480,9 +2468,7 @@ mt7530_setup(struct dsa_switch *ds) mt7530_set(priv, MT7530_PSC_P(i), SA_DIS); if (dsa_is_cpu_port(ds, i)) { @@ -106,7 +106,7 @@ Signed-off-by: Paolo Abeni } else { mt7530_port_disable(ds, i); -@@ -2410,9 +2396,7 @@ mt7531_setup_common(struct dsa_switch *d +@@ -2589,9 +2575,7 @@ mt7531_setup_common(struct dsa_switch *d mt7530_set(priv, MT7531_DBG_CNT(i), MT7531_DIS_CLR); if (dsa_is_cpu_port(ds, i)) { @@ -117,7 +117,7 @@ Signed-off-by: Paolo Abeni } else { mt7530_port_disable(ds, i); -@@ -2501,10 +2485,6 @@ mt7531_setup(struct dsa_switch *ds) +@@ -2683,10 +2667,6 @@ mt7531_setup(struct dsa_switch *ds) mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK, MT7531_GPIO0_INTERRUPT); @@ -125,10 +125,10 @@ Signed-off-by: Paolo Abeni - priv->p5_interface = PHY_INTERFACE_MODE_NA; - priv->p6_interface = PHY_INTERFACE_MODE_NA; - - /* Enable PHY core PLL, since phy_device has not yet been created - * provided for phy_[read,write]_mmd_indirect is called, we provide - * our own mt7531_ind_mmd_phy_[read,write] to complete this -@@ -2716,26 +2696,9 @@ mt753x_phylink_mac_config(struct dsa_swi + /* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since + * phy_device has not yet been created provided for + * phy_[read,write]_mmd_indirect is called, we provide our own +@@ -2905,26 +2885,9 @@ mt753x_phylink_mac_config(struct dsa_swi struct mt7530_priv *priv = ds->priv; u32 mcr_cur, mcr_new; @@ -156,7 +156,7 @@ Signed-off-by: Paolo Abeni mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port)); mcr_new = mcr_cur; mcr_new &= ~PMCR_LINK_SETTINGS_MASK; -@@ -2771,17 +2734,10 @@ static void mt753x_phylink_mac_link_up(s +@@ -2960,17 +2923,10 @@ static void mt753x_phylink_mac_link_up(s mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK; @@ -176,7 +176,7 @@ Signed-off-by: Paolo Abeni mcr |= PMCR_FORCE_SPEED_1000; break; case SPEED_100: -@@ -2799,6 +2755,7 @@ static void mt753x_phylink_mac_link_up(s +@@ -2988,6 +2944,7 @@ static void mt753x_phylink_mac_link_up(s if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) { switch (speed) { case SPEED_1000: @@ -184,7 +184,7 @@ Signed-off-by: Paolo Abeni mcr |= PMCR_FORCE_EEE1G; break; case SPEED_100: -@@ -2810,61 +2767,6 @@ static void mt753x_phylink_mac_link_up(s +@@ -2999,61 +2956,6 @@ static void mt753x_phylink_mac_link_up(s mt7530_set(priv, MT7530_PMCR_P(port), mcr); } @@ -246,7 +246,7 @@ Signed-off-by: Paolo Abeni static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { -@@ -3122,7 +3024,6 @@ const struct mt753x_info mt753x_table[] +@@ -3312,7 +3214,6 @@ const struct mt753x_info mt753x_table[] .sw_setup = mt7531_setup, .phy_read = mt7531_ind_phy_read, .phy_write = mt7531_ind_phy_write, @@ -254,7 +254,7 @@ Signed-off-by: Paolo Abeni .mac_port_get_caps = mt7531_mac_port_get_caps, .mac_port_config = mt7531_mac_config, }, -@@ -3132,7 +3033,6 @@ const struct mt753x_info mt753x_table[] +@@ -3322,7 +3223,6 @@ const struct mt753x_info mt753x_table[] .sw_setup = mt7988_setup, .phy_read = mt7531_ind_phy_read, .phy_write = mt7531_ind_phy_write, @@ -264,7 +264,7 @@ Signed-off-by: Paolo Abeni }; --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h -@@ -331,13 +331,6 @@ enum mt7530_vlan_port_acc_frm { +@@ -340,13 +340,6 @@ enum mt7530_vlan_port_acc_frm { PMCR_TX_FC_EN | PMCR_RX_FC_EN | \ PMCR_FORCE_FDX | PMCR_FORCE_LNK | \ PMCR_FORCE_EEE1G | PMCR_FORCE_EEE100) @@ -278,7 +278,7 @@ Signed-off-by: Paolo Abeni #define MT7530_PMEEECR_P(x) (0x3004 + (x) * 0x100) #define WAKEUP_TIME_1000(x) (((x) & 0xFF) << 24) -@@ -737,7 +730,6 @@ struct mt753x_info { +@@ -747,7 +740,6 @@ struct mt753x_info { int (*sw_setup)(struct dsa_switch *ds); int (*phy_read)(struct mt7530_priv *priv, int port, int regnum); int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val); @@ -286,7 +286,7 @@ Signed-off-by: Paolo Abeni void (*mac_port_get_caps)(struct dsa_switch *ds, int port, struct phylink_config *config); void (*mac_port_validate)(struct dsa_switch *ds, int port, -@@ -763,7 +755,6 @@ struct mt753x_info { +@@ -773,7 +765,6 @@ struct mt753x_info { * @ports: Holding the state among ports * @reg_mutex: The lock for protecting among process accessing * registers @@ -294,7 +294,7 @@ Signed-off-by: Paolo Abeni * @p5_intf_sel: Holding the current port 5 interface select * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch * has got SGMII -@@ -785,8 +776,6 @@ struct mt7530_priv { +@@ -795,8 +786,6 @@ struct mt7530_priv { const struct mt753x_info *info; unsigned int id; bool mcm; diff --git a/target/linux/generic/backport-6.1/790-42-v6.9-net-dsa-mt7530-get-rid-of-mt753x_mac_config.patch b/target/linux/generic/backport-6.1/790-42-v6.9-net-dsa-mt7530-get-rid-of-mt753x_mac_config.patch index f14634c17a..c83a627808 100644 --- a/target/linux/generic/backport-6.1/790-42-v6.9-net-dsa-mt7530-get-rid-of-mt753x_mac_config.patch +++ b/target/linux/generic/backport-6.1/790-42-v6.9-net-dsa-mt7530-get-rid-of-mt753x_mac_config.patch @@ -18,7 +18,7 @@ Signed-off-by: Paolo Abeni --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2661,16 +2661,6 @@ mt7531_mac_config(struct dsa_switch *ds, +@@ -2850,16 +2850,6 @@ mt7531_mac_config(struct dsa_switch *ds, } } @@ -35,7 +35,7 @@ Signed-off-by: Paolo Abeni static struct phylink_pcs * mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port, phy_interface_t interface) -@@ -2696,8 +2686,8 @@ mt753x_phylink_mac_config(struct dsa_swi +@@ -2885,8 +2875,8 @@ mt753x_phylink_mac_config(struct dsa_swi struct mt7530_priv *priv = ds->priv; u32 mcr_cur, mcr_new; diff --git a/target/linux/generic/backport-6.1/790-43-v6.9-net-dsa-mt7530-put-initialising-PCS-devices-code-bac.patch b/target/linux/generic/backport-6.1/790-43-v6.9-net-dsa-mt7530-put-initialising-PCS-devices-code-bac.patch index 2fa17d4558..84ee7416bf 100644 --- a/target/linux/generic/backport-6.1/790-43-v6.9-net-dsa-mt7530-put-initialising-PCS-devices-code-bac.patch +++ b/target/linux/generic/backport-6.1/790-43-v6.9-net-dsa-mt7530-put-initialising-PCS-devices-code-bac.patch @@ -20,7 +20,7 @@ Signed-off-by: Paolo Abeni --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2845,17 +2845,9 @@ static int +@@ -3034,17 +3034,9 @@ static int mt753x_setup(struct dsa_switch *ds) { struct mt7530_priv *priv = ds->priv; @@ -40,7 +40,7 @@ Signed-off-by: Paolo Abeni if (ret) return ret; -@@ -2867,6 +2859,14 @@ mt753x_setup(struct dsa_switch *ds) +@@ -3056,6 +3048,14 @@ mt753x_setup(struct dsa_switch *ds) if (ret && priv->irq) mt7530_free_irq_common(priv); diff --git a/target/linux/generic/backport-6.1/790-44-v6.9-net-dsa-mt7530-sort-link-settings-ops-and-force-link.patch b/target/linux/generic/backport-6.1/790-44-v6.9-net-dsa-mt7530-sort-link-settings-ops-and-force-link.patch index d7c8180c8a..814a9d06e7 100644 --- a/target/linux/generic/backport-6.1/790-44-v6.9-net-dsa-mt7530-sort-link-settings-ops-and-force-link.patch +++ b/target/linux/generic/backport-6.1/790-44-v6.9-net-dsa-mt7530-sort-link-settings-ops-and-force-link.patch @@ -24,7 +24,7 @@ Signed-off-by: Paolo Abeni --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -1047,7 +1047,6 @@ mt7530_port_enable(struct dsa_switch *ds +@@ -1222,7 +1222,6 @@ mt7530_port_enable(struct dsa_switch *ds priv->ports[port].enable = true; mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, priv->ports[port].pm); @@ -32,7 +32,7 @@ Signed-off-by: Paolo Abeni mutex_unlock(&priv->reg_mutex); -@@ -1067,7 +1066,6 @@ mt7530_port_disable(struct dsa_switch *d +@@ -1242,7 +1241,6 @@ mt7530_port_disable(struct dsa_switch *d priv->ports[port].enable = false; mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, PCR_MATRIX_CLR); @@ -40,7 +40,7 @@ Signed-off-by: Paolo Abeni mutex_unlock(&priv->reg_mutex); } -@@ -2284,6 +2282,12 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2460,6 +2458,12 @@ mt7530_setup(struct dsa_switch *ds) mt7530_mib_reset(ds); for (i = 0; i < MT7530_NUM_PORTS; i++) { @@ -53,7 +53,7 @@ Signed-off-by: Paolo Abeni /* Disable forwarding by default on all ports */ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, PCR_MATRIX_CLR); -@@ -2386,6 +2390,12 @@ mt7531_setup_common(struct dsa_switch *d +@@ -2565,6 +2569,12 @@ mt7531_setup_common(struct dsa_switch *d UNU_FFP_MASK); for (i = 0; i < MT7530_NUM_PORTS; i++) { diff --git a/target/linux/generic/backport-6.1/790-45-v6.9-net-dsa-mt7530-simplify-link-operations.patch b/target/linux/generic/backport-6.1/790-45-v6.9-net-dsa-mt7530-simplify-link-operations.patch index d29b183be1..d9f91a932a 100644 --- a/target/linux/generic/backport-6.1/790-45-v6.9-net-dsa-mt7530-simplify-link-operations.patch +++ b/target/linux/generic/backport-6.1/790-45-v6.9-net-dsa-mt7530-simplify-link-operations.patch @@ -45,7 +45,7 @@ Signed-off-by: Paolo Abeni --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2694,23 +2694,13 @@ mt753x_phylink_mac_config(struct dsa_swi +@@ -2883,23 +2883,13 @@ mt753x_phylink_mac_config(struct dsa_swi const struct phylink_link_state *state) { struct mt7530_priv *priv = ds->priv; @@ -72,7 +72,7 @@ Signed-off-by: Paolo Abeni static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port, --- a/drivers/net/dsa/mt7530.h +++ b/drivers/net/dsa/mt7530.h -@@ -324,8 +324,6 @@ enum mt7530_vlan_port_acc_frm { +@@ -333,8 +333,6 @@ enum mt7530_vlan_port_acc_frm { MT7531_FORCE_DPX | \ MT7531_FORCE_RX_FC | \ MT7531_FORCE_TX_FC) diff --git a/target/linux/generic/backport-6.1/790-46-v6.9-net-dsa-mt7530-fix-improper-frames-on-all-25MHz-and-.patch b/target/linux/generic/backport-6.1/790-46-v6.9-net-dsa-mt7530-fix-improper-frames-on-all-25MHz-and-.patch deleted file mode 100644 index e00615d540..0000000000 --- a/target/linux/generic/backport-6.1/790-46-v6.9-net-dsa-mt7530-fix-improper-frames-on-all-25MHz-and-.patch +++ /dev/null @@ -1,74 +0,0 @@ -From cfa7c85f92cd3814ad9748eb1ab25658c7f7cc67 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= -Date: Wed, 20 Mar 2024 23:45:30 +0300 -Subject: [PATCH 48/48] net: dsa: mt7530: fix improper frames on all 25MHz and - 40MHz XTAL MT7530 -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The MT7530 switch after reset initialises with a core clock frequency that -works with a 25MHz XTAL connected to it. For 40MHz XTAL, the core clock -frequency must be set to 500MHz. - -The mt7530_pll_setup() function is responsible of setting the core clock -frequency. Currently, it runs on MT7530 with 25MHz and 40MHz XTAL. This -causes MT7530 switch with 25MHz XTAL to egress and ingress frames -improperly. - -Introduce a check to run it only on MT7530 with 40MHz XTAL. - -The core clock frequency is set by writing to a switch PHY's register. -Access to the PHY's register is done via the MDIO bus the switch is also -on. Therefore, it works only when the switch makes switch PHYs listen on -the MDIO bus the switch is on. This is controlled either by the state of -the ESW_P1_LED_1 pin after reset deassertion or modifying bit 5 of the -modifiable trap register. - -When ESW_P1_LED_1 is pulled high, PHY indirect access is used. That means -accessing PHY registers via the PHY indirect access control register of the -switch. - -When ESW_P1_LED_1 is pulled low, PHY direct access is used. That means -accessing PHY registers via the MDIO bus the switch is on. - -For MT7530 switch with 40MHz XTAL on a board with ESW_P1_LED_1 pulled high, -the core clock frequency won't be set to 500MHz, causing the switch to -egress and ingress frames improperly. - -Run mt7530_pll_setup() after PHY direct access is set on the modifiable -trap register. - -With these two changes, all MT7530 switches with 25MHz and 40MHz, and -P1_LED_1 pulled high or low, will egress and ingress frames properly. - -Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/4a5dd143f2172ec97a2872fa29c7c4cd520f45b5/linux-mt/drivers/net/ethernet/mediatek/gsw_mt7623.c#L1039 -Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") -Signed-off-by: Arınç ÜNAL -Link: https://lore.kernel.org/r/20240320-for-net-mt7530-fix-25mhz-xtal-with-direct-phy-access-v1-1-d92f605f1160@arinc9.com -Signed-off-by: Paolo Abeni ---- - drivers/net/dsa/mt7530.c | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/drivers/net/dsa/mt7530.c -+++ b/drivers/net/dsa/mt7530.c -@@ -2259,8 +2259,6 @@ mt7530_setup(struct dsa_switch *ds) - SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST | - SYS_CTRL_REG_RST); - -- mt7530_pll_setup(priv); -- - /* Lower Tx driving for TRGMII path */ - for (i = 0; i < NUM_TRGMII_CTRL; i++) - mt7530_write(priv, MT7530_TRGMII_TD_ODT(i), -@@ -2276,6 +2274,9 @@ mt7530_setup(struct dsa_switch *ds) - val |= MHWTRAP_MANUAL; - mt7530_write(priv, MT7530_MHWTRAP, val); - -+ if ((val & HWTRAP_XTAL_MASK) == HWTRAP_XTAL_40MHZ) -+ mt7530_pll_setup(priv); -+ - mt753x_trap_frames(priv); - - /* Enable and reset MIB counters */ diff --git a/target/linux/generic/backport-6.1/790-47-v6.10-net-dsa-mt7530-fix-enabling-EEE-on-MT7531-switch-on-.patch b/target/linux/generic/backport-6.1/790-47-v6.10-net-dsa-mt7530-fix-enabling-EEE-on-MT7531-switch-on-.patch deleted file mode 100644 index dc202a55e6..0000000000 --- a/target/linux/generic/backport-6.1/790-47-v6.10-net-dsa-mt7530-fix-enabling-EEE-on-MT7531-switch-on-.patch +++ /dev/null @@ -1,92 +0,0 @@ -From ef972fc9f5743da589ce9546dd565d6c56e679b8 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= -Date: Mon, 8 Apr 2024 10:08:53 +0300 -Subject: [PATCH 1/2] net: dsa: mt7530: fix enabling EEE on MT7531 switch on - all boards -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The commit 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features") -brought EEE support but did not enable EEE on MT7531 switch MACs. EEE is -enabled on MT7531 switch MACs by pulling the LAN2LED0 pin low on the board -(bootstrapping), unsetting the EEE_DIS bit on the trap register, or setting -the internal EEE switch bit on the CORE_PLL_GROUP4 register. Thanks to -SkyLake Huang (黃啟澤) from MediaTek for providing information on the -internal EEE switch bit. - -There are existing boards that were not designed to pull the pin low. -Because of that, the EEE status currently depends on the board design. - -The EEE_DIS bit on the trap pertains to the LAN2LED0 pin which is usually -used to control an LED. Once the bit is unset, the pin will be low. That -will make the active low LED turn on. The pin is controlled by the switch -PHY. It seems that the PHY controls the pin in the way that it inverts the -pin state. That means depending on the wiring of the LED connected to -LAN2LED0 on the board, the LED may be on without an active link. - -To not cause this unwanted behaviour whilst enabling EEE on all boards, set -the internal EEE switch bit on the CORE_PLL_GROUP4 register. - -My testing on MT7531 shows a certain amount of traffic loss when EEE is -enabled. That said, I haven't come across a board that enables EEE. So -enable EEE on the switch MACs but disable EEE advertisement on the switch -PHYs. This way, we don't change the behaviour of the majority of the boards -that have this switch. The mediatek-ge PHY driver already disables EEE -advertisement on the switch PHYs but my testing shows that it is somehow -enabled afterwards. Disabling EEE advertisement before the PHY driver -initialises keeps it off. - -With this change, EEE can now be enabled using ethtool. - -Fixes: 40b5d2f15c09 ("net: dsa: mt7530: Add support for EEE features") -Reviewed-by: Florian Fainelli -Signed-off-by: Arınç ÜNAL ---- - drivers/net/dsa/mt7530.c | 17 ++++++++++++----- - drivers/net/dsa/mt7530.h | 1 + - 2 files changed, 13 insertions(+), 5 deletions(-) - ---- a/drivers/net/dsa/mt7530.c -+++ b/drivers/net/dsa/mt7530.c -@@ -2496,18 +2496,25 @@ mt7531_setup(struct dsa_switch *ds) - mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK, - MT7531_GPIO0_INTERRUPT); - -- /* Enable PHY core PLL, since phy_device has not yet been created -- * provided for phy_[read,write]_mmd_indirect is called, we provide -- * our own mt7531_ind_mmd_phy_[read,write] to complete this -- * function. -+ /* Enable Energy-Efficient Ethernet (EEE) and PHY core PLL, since -+ * phy_device has not yet been created provided for -+ * phy_[read,write]_mmd_indirect is called, we provide our own -+ * mt7531_ind_mmd_phy_[read,write] to complete this function. - */ - val = mt7531_ind_c45_phy_read(priv, MT753X_CTRL_PHY_ADDR, - MDIO_MMD_VEND2, CORE_PLL_GROUP4); -- val |= MT7531_PHY_PLL_BYPASS_MODE; -+ val |= MT7531_RG_SYSPLL_DMY2 | MT7531_PHY_PLL_BYPASS_MODE; - val &= ~MT7531_PHY_PLL_OFF; - mt7531_ind_c45_phy_write(priv, MT753X_CTRL_PHY_ADDR, MDIO_MMD_VEND2, - CORE_PLL_GROUP4, val); - -+ /* Disable EEE advertisement on the switch PHYs. */ -+ for (i = MT753X_CTRL_PHY_ADDR; -+ i < MT753X_CTRL_PHY_ADDR + MT7530_NUM_PHYS; i++) { -+ mt7531_ind_c45_phy_write(priv, i, MDIO_MMD_AN, MDIO_AN_EEE_ADV, -+ 0); -+ } -+ - mt7531_setup_common(ds); - - /* Setup VLAN ID 0 for VLAN-unaware bridges */ ---- a/drivers/net/dsa/mt7530.h -+++ b/drivers/net/dsa/mt7530.h -@@ -616,6 +616,7 @@ enum mt7531_clk_skew { - #define RG_SYSPLL_DDSFBK_EN BIT(12) - #define RG_SYSPLL_BIAS_EN BIT(11) - #define RG_SYSPLL_BIAS_LPF_EN BIT(10) -+#define MT7531_RG_SYSPLL_DMY2 BIT(6) - #define MT7531_PHY_PLL_OFF BIT(5) - #define MT7531_PHY_PLL_BYPASS_MODE BIT(4) - diff --git a/target/linux/generic/backport-6.1/790-48-STABLE-net-dsa-mt7530-trap-link-local-frames-regardless-of-.patch b/target/linux/generic/backport-6.1/790-48-STABLE-net-dsa-mt7530-trap-link-local-frames-regardless-of-.patch deleted file mode 100644 index 4d70e774a4..0000000000 --- a/target/linux/generic/backport-6.1/790-48-STABLE-net-dsa-mt7530-trap-link-local-frames-regardless-of-.patch +++ /dev/null @@ -1,483 +0,0 @@ -From b7427d66cb3d6dca5165de5f7d80d59f08c2795b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= -Date: Tue, 9 Apr 2024 18:01:14 +0300 -Subject: [PATCH 2/2] net: dsa: mt7530: trap link-local frames regardless of ST - Port State -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer -(DLL) of the Open Systems Interconnection basic reference model (OSI/RM) -are described; the medium access control (MAC) and logical link control -(LLC) sublayers. The MAC sublayer is the one facing the physical layer. - -In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A -Bridge component comprises a MAC Relay Entity for interconnecting the Ports -of the Bridge, at least two Ports, and higher layer entities with at least -a Spanning Tree Protocol Entity included. - -Each Bridge Port also functions as an end station and shall provide the MAC -Service to an LLC Entity. Each instance of the MAC Service is provided to a -distinct LLC Entity that supports protocol identification, multiplexing, -and demultiplexing, for protocol data unit (PDU) transmission and reception -by one or more higher layer entities. - -It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC -Entity associated with each Bridge Port is modeled as being directly -connected to the attached Local Area Network (LAN). - -On the switch with CPU port architecture, CPU port functions as Management -Port, and the Management Port functionality is provided by software which -functions as an end station. Software is connected to an IEEE 802 LAN that -is wholly contained within the system that incorporates the Bridge. -Software provides access to the LLC Entity associated with each Bridge Port -by the value of the source port field on the special tag on the frame -received by software. - -We call frames that carry control information to determine the active -topology and current extent of each Virtual Local Area Network (VLAN), -i.e., spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN -Registration Protocol Data Units (MVRPDUs), and frames from other link -constrained protocols, such as Extensible Authentication Protocol over LAN -(EAPOL) and Link Layer Discovery Protocol (LLDP), link-local frames. They -are not forwarded by a Bridge. Permanently configured entries in the -filtering database (FDB) ensure that such frames are discarded by the -Forwarding Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in -detail: - -Each of the reserved MAC addresses specified in Table 8-1 -(01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be -permanently configured in the FDB in C-VLAN components and ERs. - -Each of the reserved MAC addresses specified in Table 8-2 -(01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently -configured in the FDB in S-VLAN components. - -Each of the reserved MAC addresses specified in Table 8-3 -(01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB -in TPMR components. - -The FDB entries for reserved MAC addresses shall specify filtering for all -Bridge Ports and all VIDs. Management shall not provide the capability to -modify or remove entries for reserved MAC addresses. - -The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of -propagation of PDUs within a Bridged Network, as follows: - - The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that - no conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN) - component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward. - PDUs transmitted using this destination address, or any other addresses - that appear in Table 8-1, Table 8-2, and Table 8-3 - (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can - therefore travel no further than those stations that can be reached via a - single individual LAN from the originating station. - - The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an - address that no conformant S-VLAN component, C-VLAN component, or MAC - Bridge can forward; however, this address is relayed by a TPMR component. - PDUs using this destination address, or any of the other addresses that - appear in both Table 8-1 and Table 8-2 but not in Table 8-3 - (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed - by any TPMRs but will propagate no further than the nearest S-VLAN - component, C-VLAN component, or MAC Bridge. - - The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an - address that no conformant C-VLAN component, MAC Bridge can forward; - however, it is relayed by TPMR components and S-VLAN components. PDUs - using this destination address, or any of the other addresses that appear - in Table 8-1 but not in either Table 8-2 or Table 8-3 - (01-80-C2-00-00-[00,0B,0C,0D,0F]), will be relayed by TPMR components and - S-VLAN components but will propagate no further than the nearest C-VLAN - component or MAC Bridge. - -Because the LLC Entity associated with each Bridge Port is provided via CPU -port, we must not filter these frames but forward them to CPU port. - -In a Bridge, the transmission Port is majorly decided by ingress and egress -rules, FDB, and spanning tree Port State functions of the Forwarding -Process. For link-local frames, only CPU port should be designated as -destination port in the FDB, and the other functions of the Forwarding -Process must not interfere with the decision of the transmission Port. We -call this process trapping frames to CPU port. - -Therefore, on the switch with CPU port architecture, link-local frames must -be trapped to CPU port, and certain link-local frames received by a Port of -a Bridge comprising a TPMR component or an S-VLAN component must be -excluded from it. - -A Bridge of the switch with CPU port architecture cannot comprise a -Two-Port MAC Relay (TPMR) component as a TPMR component supports only a -subset of the functionality of a MAC Bridge. A Bridge comprising two Ports -(Management Port doesn't count) of this architecture will either function -as a standard MAC Bridge or a standard VLAN Bridge. - -Therefore, a Bridge of this architecture can only comprise S-VLAN -components, C-VLAN components, or MAC Bridge components. Since there's no -TPMR component, we don't need to relay PDUs using the destination addresses -specified on the Nearest non-TPMR section, and the proportion of the -Nearest Customer Bridge section where they must be relayed by TPMR -components. - -One option to trap link-local frames to CPU port is to add static FDB -entries with CPU port designated as destination port. However, because that -Independent VLAN Learning (IVL) is being used on every VID, each entry only -applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC -Bridge component or a C-VLAN component, there would have to be 16 times -4096 entries. This switch intellectual property can only hold a maximum of -2048 entries. Using this option, there also isn't a mechanism to prevent -link-local frames from being discarded when the spanning tree Port State of -the reception Port is discarding. - -The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4 -registers. Whilst this applies to every VID, it doesn't contain all of the -reserved MAC addresses without affecting the remaining Standard Group MAC -Addresses. The REV_UN frame tag utilised using the RGAC4 register covers -the remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination -addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF -destination addresses which may be relayed by MAC Bridges or VLAN Bridges. -The latter option provides better but not complete conformance. - -This switch intellectual property also does not provide a mechanism to trap -link-local frames with specific destination addresses to CPU port by -Bridge, to conform to the filtering rules for the distinct Bridge -components. - -Therefore, regardless of the type of the Bridge component, link-local -frames with these destination addresses will be trapped to CPU port: - -01-80-C2-00-00-[00,01,02,03,0E] - -In a Bridge comprising a MAC Bridge component or a C-VLAN component: - - Link-local frames with these destination addresses won't be trapped to - CPU port which won't conform to IEEE Std 802.1Q-2022: - - 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] - -In a Bridge comprising an S-VLAN component: - - Link-local frames with these destination addresses will be trapped to CPU - port which won't conform to IEEE Std 802.1Q-2022: - - 01-80-C2-00-00-00 - - Link-local frames with these destination addresses won't be trapped to - CPU port which won't conform to IEEE Std 802.1Q-2022: - - 01-80-C2-00-00-[04,05,06,07,08,09,0A] - -Currently on this switch intellectual property, if the spanning tree Port -State of the reception Port is discarding, link-local frames will be -discarded. - -To trap link-local frames regardless of the spanning tree Port State, make -the switch regard them as Bridge Protocol Data Units (BPDUs). This switch -intellectual property only lets the frames regarded as BPDUs bypass the -spanning tree Port State function of the Forwarding Process. - -With this change, the only remaining interference is the ingress rules. -When the reception Port has no PVID assigned on software, VLAN-untagged -frames won't be allowed in. There doesn't seem to be a mechanism on the -switch intellectual property to have link-local frames bypass this function -of the Forwarding Process. - -Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") -Reviewed-by: Daniel Golle -Signed-off-by: Arınç ÜNAL ---- - drivers/net/dsa/mt7530.c | 229 +++++++++++++++++++++++++++++++++------ - drivers/net/dsa/mt7530.h | 5 + - 2 files changed, 200 insertions(+), 34 deletions(-) - ---- a/drivers/net/dsa/mt7530.c -+++ b/drivers/net/dsa/mt7530.c -@@ -943,20 +943,173 @@ static void mt7530_setup_port5(struct ds - mutex_unlock(&priv->reg_mutex); - } - --/* On page 205, section "8.6.3 Frame filtering" of the active standard, IEEE Std -- * 802.1Q™-2022, it is stated that frames with 01:80:C2:00:00:00-0F as MAC DA -- * must only be propagated to C-VLAN and MAC Bridge components. That means -- * VLAN-aware and VLAN-unaware bridges. On the switch designs with CPU ports, -- * these frames are supposed to be processed by the CPU (software). So we make -- * the switch only forward them to the CPU port. And if received from a CPU -- * port, forward to a single port. The software is responsible of making the -- * switch conform to the latter by setting a single port as destination port on -- * the special tag. -- * -- * This switch intellectual property cannot conform to this part of the standard -- * fully. Whilst the REV_UN frame tag covers the remaining :04-0D and :0F MAC -- * DAs, it also includes :22-FF which the scope of propagation is not supposed -- * to be restricted for these MAC DAs. -+/* In Clause 5 of IEEE Std 802-2014, two sublayers of the data link layer (DLL) -+ * of the Open Systems Interconnection basic reference model (OSI/RM) are -+ * described; the medium access control (MAC) and logical link control (LLC) -+ * sublayers. The MAC sublayer is the one facing the physical layer. -+ * -+ * In 8.2 of IEEE Std 802.1Q-2022, the Bridge architecture is described. A -+ * Bridge component comprises a MAC Relay Entity for interconnecting the Ports -+ * of the Bridge, at least two Ports, and higher layer entities with at least a -+ * Spanning Tree Protocol Entity included. -+ * -+ * Each Bridge Port also functions as an end station and shall provide the MAC -+ * Service to an LLC Entity. Each instance of the MAC Service is provided to a -+ * distinct LLC Entity that supports protocol identification, multiplexing, and -+ * demultiplexing, for protocol data unit (PDU) transmission and reception by -+ * one or more higher layer entities. -+ * -+ * It is described in 8.13.9 of IEEE Std 802.1Q-2022 that in a Bridge, the LLC -+ * Entity associated with each Bridge Port is modeled as being directly -+ * connected to the attached Local Area Network (LAN). -+ * -+ * On the switch with CPU port architecture, CPU port functions as Management -+ * Port, and the Management Port functionality is provided by software which -+ * functions as an end station. Software is connected to an IEEE 802 LAN that is -+ * wholly contained within the system that incorporates the Bridge. Software -+ * provides access to the LLC Entity associated with each Bridge Port by the -+ * value of the source port field on the special tag on the frame received by -+ * software. -+ * -+ * We call frames that carry control information to determine the active -+ * topology and current extent of each Virtual Local Area Network (VLAN), i.e., -+ * spanning tree or Shortest Path Bridging (SPB) and Multiple VLAN Registration -+ * Protocol Data Units (MVRPDUs), and frames from other link constrained -+ * protocols, such as Extensible Authentication Protocol over LAN (EAPOL) and -+ * Link Layer Discovery Protocol (LLDP), link-local frames. They are not -+ * forwarded by a Bridge. Permanently configured entries in the filtering -+ * database (FDB) ensure that such frames are discarded by the Forwarding -+ * Process. In 8.6.3 of IEEE Std 802.1Q-2022, this is described in detail: -+ * -+ * Each of the reserved MAC addresses specified in Table 8-1 -+ * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]) shall be -+ * permanently configured in the FDB in C-VLAN components and ERs. -+ * -+ * Each of the reserved MAC addresses specified in Table 8-2 -+ * (01-80-C2-00-00-[01,02,03,04,05,06,07,08,09,0A,0E]) shall be permanently -+ * configured in the FDB in S-VLAN components. -+ * -+ * Each of the reserved MAC addresses specified in Table 8-3 -+ * (01-80-C2-00-00-[01,02,04,0E]) shall be permanently configured in the FDB in -+ * TPMR components. -+ * -+ * The FDB entries for reserved MAC addresses shall specify filtering for all -+ * Bridge Ports and all VIDs. Management shall not provide the capability to -+ * modify or remove entries for reserved MAC addresses. -+ * -+ * The addresses in Table 8-1, Table 8-2, and Table 8-3 determine the scope of -+ * propagation of PDUs within a Bridged Network, as follows: -+ * -+ * The Nearest Bridge group address (01-80-C2-00-00-0E) is an address that no -+ * conformant Two-Port MAC Relay (TPMR) component, Service VLAN (S-VLAN) -+ * component, Customer VLAN (C-VLAN) component, or MAC Bridge can forward. -+ * PDUs transmitted using this destination address, or any other addresses -+ * that appear in Table 8-1, Table 8-2, and Table 8-3 -+ * (01-80-C2-00-00-[00,01,02,03,04,05,06,07,08,09,0A,0B,0C,0D,0E,0F]), can -+ * therefore travel no further than those stations that can be reached via a -+ * single individual LAN from the originating station. -+ * -+ * The Nearest non-TPMR Bridge group address (01-80-C2-00-00-03), is an -+ * address that no conformant S-VLAN component, C-VLAN component, or MAC -+ * Bridge can forward; however, this address is relayed by a TPMR component. -+ * PDUs using this destination address, or any of the other addresses that -+ * appear in both Table 8-1 and Table 8-2 but not in Table 8-3 -+ * (01-80-C2-00-00-[00,03,05,06,07,08,09,0A,0B,0C,0D,0F]), will be relayed by -+ * any TPMRs but will propagate no further than the nearest S-VLAN component, -+ * C-VLAN component, or MAC Bridge. -+ * -+ * The Nearest Customer Bridge group address (01-80-C2-00-00-00) is an address -+ * that no conformant C-VLAN component, MAC Bridge can forward; however, it is -+ * relayed by TPMR components and S-VLAN components. PDUs using this -+ * destination address, or any of the other addresses that appear in Table 8-1 -+ * but not in either Table 8-2 or Table 8-3 (01-80-C2-00-00-[00,0B,0C,0D,0F]), -+ * will be relayed by TPMR components and S-VLAN components but will propagate -+ * no further than the nearest C-VLAN component or MAC Bridge. -+ * -+ * Because the LLC Entity associated with each Bridge Port is provided via CPU -+ * port, we must not filter these frames but forward them to CPU port. -+ * -+ * In a Bridge, the transmission Port is majorly decided by ingress and egress -+ * rules, FDB, and spanning tree Port State functions of the Forwarding Process. -+ * For link-local frames, only CPU port should be designated as destination port -+ * in the FDB, and the other functions of the Forwarding Process must not -+ * interfere with the decision of the transmission Port. We call this process -+ * trapping frames to CPU port. -+ * -+ * Therefore, on the switch with CPU port architecture, link-local frames must -+ * be trapped to CPU port, and certain link-local frames received by a Port of a -+ * Bridge comprising a TPMR component or an S-VLAN component must be excluded -+ * from it. -+ * -+ * A Bridge of the switch with CPU port architecture cannot comprise a Two-Port -+ * MAC Relay (TPMR) component as a TPMR component supports only a subset of the -+ * functionality of a MAC Bridge. A Bridge comprising two Ports (Management Port -+ * doesn't count) of this architecture will either function as a standard MAC -+ * Bridge or a standard VLAN Bridge. -+ * -+ * Therefore, a Bridge of this architecture can only comprise S-VLAN components, -+ * C-VLAN components, or MAC Bridge components. Since there's no TPMR component, -+ * we don't need to relay PDUs using the destination addresses specified on the -+ * Nearest non-TPMR section, and the proportion of the Nearest Customer Bridge -+ * section where they must be relayed by TPMR components. -+ * -+ * One option to trap link-local frames to CPU port is to add static FDB entries -+ * with CPU port designated as destination port. However, because that -+ * Independent VLAN Learning (IVL) is being used on every VID, each entry only -+ * applies to a single VLAN Identifier (VID). For a Bridge comprising a MAC -+ * Bridge component or a C-VLAN component, there would have to be 16 times 4096 -+ * entries. This switch intellectual property can only hold a maximum of 2048 -+ * entries. Using this option, there also isn't a mechanism to prevent -+ * link-local frames from being discarded when the spanning tree Port State of -+ * the reception Port is discarding. -+ * -+ * The remaining option is to utilise the BPC, RGAC1, RGAC2, RGAC3, and RGAC4 -+ * registers. Whilst this applies to every VID, it doesn't contain all of the -+ * reserved MAC addresses without affecting the remaining Standard Group MAC -+ * Addresses. The REV_UN frame tag utilised using the RGAC4 register covers the -+ * remaining 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] destination -+ * addresses. It also includes the 01-80-C2-00-00-22 to 01-80-C2-00-00-FF -+ * destination addresses which may be relayed by MAC Bridges or VLAN Bridges. -+ * The latter option provides better but not complete conformance. -+ * -+ * This switch intellectual property also does not provide a mechanism to trap -+ * link-local frames with specific destination addresses to CPU port by Bridge, -+ * to conform to the filtering rules for the distinct Bridge components. -+ * -+ * Therefore, regardless of the type of the Bridge component, link-local frames -+ * with these destination addresses will be trapped to CPU port: -+ * -+ * 01-80-C2-00-00-[00,01,02,03,0E] -+ * -+ * In a Bridge comprising a MAC Bridge component or a C-VLAN component: -+ * -+ * Link-local frames with these destination addresses won't be trapped to CPU -+ * port which won't conform to IEEE Std 802.1Q-2022: -+ * -+ * 01-80-C2-00-00-[04,05,06,07,08,09,0A,0B,0C,0D,0F] -+ * -+ * In a Bridge comprising an S-VLAN component: -+ * -+ * Link-local frames with these destination addresses will be trapped to CPU -+ * port which won't conform to IEEE Std 802.1Q-2022: -+ * -+ * 01-80-C2-00-00-00 -+ * -+ * Link-local frames with these destination addresses won't be trapped to CPU -+ * port which won't conform to IEEE Std 802.1Q-2022: -+ * -+ * 01-80-C2-00-00-[04,05,06,07,08,09,0A] -+ * -+ * To trap link-local frames to CPU port as conformant as this switch -+ * intellectual property can allow, link-local frames are made to be regarded as -+ * Bridge Protocol Data Units (BPDUs). This is because this switch intellectual -+ * property only lets the frames regarded as BPDUs bypass the spanning tree Port -+ * State function of the Forwarding Process. -+ * -+ * The only remaining interference is the ingress rules. When the reception Port -+ * has no PVID assigned on software, VLAN-untagged frames won't be allowed in. -+ * There doesn't seem to be a mechanism on the switch intellectual property to -+ * have link-local frames bypass this function of the Forwarding Process. - */ - static void - mt753x_trap_frames(struct mt7530_priv *priv) -@@ -964,35 +1117,43 @@ mt753x_trap_frames(struct mt7530_priv *p - /* Trap 802.1X PAE frames and BPDUs to the CPU port(s) and egress them - * VLAN-untagged. - */ -- mt7530_rmw(priv, MT753X_BPC, MT753X_PAE_EG_TAG_MASK | -- MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK | -- MT753X_BPDU_PORT_FW_MASK, -- MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | -- MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) | -- MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | -- MT753X_BPDU_CPU_ONLY); -+ mt7530_rmw(priv, MT753X_BPC, -+ MT753X_PAE_BPDU_FR | MT753X_PAE_EG_TAG_MASK | -+ MT753X_PAE_PORT_FW_MASK | MT753X_BPDU_EG_TAG_MASK | -+ MT753X_BPDU_PORT_FW_MASK, -+ MT753X_PAE_BPDU_FR | -+ MT753X_PAE_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | -+ MT753X_PAE_PORT_FW(MT753X_BPDU_CPU_ONLY) | -+ MT753X_BPDU_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | -+ MT753X_BPDU_CPU_ONLY); - - /* Trap frames with :01 and :02 MAC DAs to the CPU port(s) and egress - * them VLAN-untagged. - */ -- mt7530_rmw(priv, MT753X_RGAC1, MT753X_R02_EG_TAG_MASK | -- MT753X_R02_PORT_FW_MASK | MT753X_R01_EG_TAG_MASK | -- MT753X_R01_PORT_FW_MASK, -- MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | -- MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) | -- MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | -- MT753X_BPDU_CPU_ONLY); -+ mt7530_rmw(priv, MT753X_RGAC1, -+ MT753X_R02_BPDU_FR | MT753X_R02_EG_TAG_MASK | -+ MT753X_R02_PORT_FW_MASK | MT753X_R01_BPDU_FR | -+ MT753X_R01_EG_TAG_MASK | MT753X_R01_PORT_FW_MASK, -+ MT753X_R02_BPDU_FR | -+ MT753X_R02_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | -+ MT753X_R02_PORT_FW(MT753X_BPDU_CPU_ONLY) | -+ MT753X_R01_BPDU_FR | -+ MT753X_R01_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | -+ MT753X_BPDU_CPU_ONLY); - - /* Trap frames with :03 and :0E MAC DAs to the CPU port(s) and egress - * them VLAN-untagged. - */ -- mt7530_rmw(priv, MT753X_RGAC2, MT753X_R0E_EG_TAG_MASK | -- MT753X_R0E_PORT_FW_MASK | MT753X_R03_EG_TAG_MASK | -- MT753X_R03_PORT_FW_MASK, -- MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | -- MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) | -- MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | -- MT753X_BPDU_CPU_ONLY); -+ mt7530_rmw(priv, MT753X_RGAC2, -+ MT753X_R0E_BPDU_FR | MT753X_R0E_EG_TAG_MASK | -+ MT753X_R0E_PORT_FW_MASK | MT753X_R03_BPDU_FR | -+ MT753X_R03_EG_TAG_MASK | MT753X_R03_PORT_FW_MASK, -+ MT753X_R0E_BPDU_FR | -+ MT753X_R0E_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | -+ MT753X_R0E_PORT_FW(MT753X_BPDU_CPU_ONLY) | -+ MT753X_R03_BPDU_FR | -+ MT753X_R03_EG_TAG(MT7530_VLAN_EG_UNTAGGED) | -+ MT753X_BPDU_CPU_ONLY); - } - - static void ---- a/drivers/net/dsa/mt7530.h -+++ b/drivers/net/dsa/mt7530.h -@@ -65,6 +65,7 @@ enum mt753x_id { - - /* Registers for BPDU and PAE frame control*/ - #define MT753X_BPC 0x24 -+#define MT753X_PAE_BPDU_FR BIT(25) - #define MT753X_PAE_EG_TAG_MASK GENMASK(24, 22) - #define MT753X_PAE_EG_TAG(x) FIELD_PREP(MT753X_PAE_EG_TAG_MASK, x) - #define MT753X_PAE_PORT_FW_MASK GENMASK(18, 16) -@@ -75,20 +76,24 @@ enum mt753x_id { - - /* Register for :01 and :02 MAC DA frame control */ - #define MT753X_RGAC1 0x28 -+#define MT753X_R02_BPDU_FR BIT(25) - #define MT753X_R02_EG_TAG_MASK GENMASK(24, 22) - #define MT753X_R02_EG_TAG(x) FIELD_PREP(MT753X_R02_EG_TAG_MASK, x) - #define MT753X_R02_PORT_FW_MASK GENMASK(18, 16) - #define MT753X_R02_PORT_FW(x) FIELD_PREP(MT753X_R02_PORT_FW_MASK, x) -+#define MT753X_R01_BPDU_FR BIT(9) - #define MT753X_R01_EG_TAG_MASK GENMASK(8, 6) - #define MT753X_R01_EG_TAG(x) FIELD_PREP(MT753X_R01_EG_TAG_MASK, x) - #define MT753X_R01_PORT_FW_MASK GENMASK(2, 0) - - /* Register for :03 and :0E MAC DA frame control */ - #define MT753X_RGAC2 0x2c -+#define MT753X_R0E_BPDU_FR BIT(25) - #define MT753X_R0E_EG_TAG_MASK GENMASK(24, 22) - #define MT753X_R0E_EG_TAG(x) FIELD_PREP(MT753X_R0E_EG_TAG_MASK, x) - #define MT753X_R0E_PORT_FW_MASK GENMASK(18, 16) - #define MT753X_R0E_PORT_FW(x) FIELD_PREP(MT753X_R0E_PORT_FW_MASK, x) -+#define MT753X_R03_BPDU_FR BIT(9) - #define MT753X_R03_EG_TAG_MASK GENMASK(8, 6) - #define MT753X_R03_EG_TAG(x) FIELD_PREP(MT753X_R03_EG_TAG_MASK, x) - #define MT753X_R03_PORT_FW_MASK GENMASK(2, 0) diff --git a/target/linux/generic/backport-6.1/790-49-v6.10-net-dsa-mt7530-provide-own-phylink-MAC-operations.patch b/target/linux/generic/backport-6.1/790-49-v6.10-net-dsa-mt7530-provide-own-phylink-MAC-operations.patch index ca2657d57d..8962e560f7 100644 --- a/target/linux/generic/backport-6.1/790-49-v6.10-net-dsa-mt7530-provide-own-phylink-MAC-operations.patch +++ b/target/linux/generic/backport-6.1/790-49-v6.10-net-dsa-mt7530-provide-own-phylink-MAC-operations.patch @@ -19,7 +19,7 @@ Signed-off-by: Paolo Abeni --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2841,28 +2841,34 @@ mt7531_mac_config(struct dsa_switch *ds, +@@ -2861,28 +2861,34 @@ mt7531_mac_config(struct dsa_switch *ds, } static struct phylink_pcs * @@ -60,7 +60,7 @@ Signed-off-by: Paolo Abeni if ((port == 5 || port == 6) && priv->info->mac_port_config) priv->info->mac_port_config(ds, port, mode, state->interface); -@@ -2872,23 +2878,25 @@ mt753x_phylink_mac_config(struct dsa_swi +@@ -2892,23 +2898,25 @@ mt753x_phylink_mac_config(struct dsa_swi mt7530_set(priv, MT7530_PMCR_P(port), PMCR_EXT_PHY); } @@ -92,7 +92,7 @@ Signed-off-by: Paolo Abeni u32 mcr; mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK; -@@ -2923,7 +2931,7 @@ static void mt753x_phylink_mac_link_up(s +@@ -2943,7 +2951,7 @@ static void mt753x_phylink_mac_link_up(s } } @@ -101,7 +101,7 @@ Signed-off-by: Paolo Abeni } static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port, -@@ -3148,16 +3156,19 @@ const struct dsa_switch_ops mt7530_switc +@@ -3169,16 +3177,19 @@ const struct dsa_switch_ops mt7530_switc .port_mirror_add = mt753x_port_mirror_add, .port_mirror_del = mt753x_port_mirror_del, .phylink_get_caps = mt753x_phylink_get_caps, @@ -125,7 +125,7 @@ Signed-off-by: Paolo Abeni const struct mt753x_info mt753x_table[] = { [ID_MT7621] = { .id = ID_MT7621, -@@ -3227,6 +3238,7 @@ mt7530_probe_common(struct mt7530_priv * +@@ -3248,6 +3259,7 @@ mt7530_probe_common(struct mt7530_priv * priv->dev = dev; priv->ds->priv = priv; priv->ds->ops = &mt7530_switch_ops; diff --git a/target/linux/generic/backport-6.1/790-50-v6.10-net-dsa-mt7530-fix-mirroring-frames-received-on-loca.patch b/target/linux/generic/backport-6.1/790-50-v6.10-net-dsa-mt7530-fix-mirroring-frames-received-on-loca.patch deleted file mode 100644 index 7640a9cb41..0000000000 --- a/target/linux/generic/backport-6.1/790-50-v6.10-net-dsa-mt7530-fix-mirroring-frames-received-on-loca.patch +++ /dev/null @@ -1,70 +0,0 @@ -From d4097ddef078a113643a6dcde01e99741f852adb Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= -Date: Sat, 13 Apr 2024 16:01:39 +0300 -Subject: [PATCH 2/5] net: dsa: mt7530: fix mirroring frames received on local - port -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This switch intellectual property provides a bit on the ARL global control -register which controls allowing mirroring frames which are received on the -local port (monitor port). This bit is unset after reset. - -This ability must be enabled to fully support the port mirroring feature on -this switch intellectual property. - -Therefore, this patch fixes the traffic not being reflected on a port, -which would be configured like below: - - tc qdisc add dev swp0 clsact - - tc filter add dev swp0 ingress matchall skip_sw \ - action mirred egress mirror dev swp0 - -As a side note, this configuration provides the hairpinning feature for a -single port. - -Fixes: 37feab6076aa ("net: dsa: mt7530: add support for port mirroring") -Signed-off-by: Arınç ÜNAL -Signed-off-by: David S. Miller ---- - drivers/net/dsa/mt7530.c | 6 ++++++ - drivers/net/dsa/mt7530.h | 4 ++++ - 2 files changed, 10 insertions(+) - ---- a/drivers/net/dsa/mt7530.c -+++ b/drivers/net/dsa/mt7530.c -@@ -2471,6 +2471,9 @@ mt7530_setup(struct dsa_switch *ds) - PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); - } - -+ /* Allow mirroring frames received on the local port (monitor port). */ -+ mt7530_set(priv, MT753X_AGC, LOCAL_EN); -+ - /* Setup VLAN ID 0 for VLAN-unaware bridges */ - ret = mt7530_setup_vlan0(priv); - if (ret) -@@ -2582,6 +2585,9 @@ mt7531_setup_common(struct dsa_switch *d - PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); - } - -+ /* Allow mirroring frames received on the local port (monitor port). */ -+ mt7530_set(priv, MT753X_AGC, LOCAL_EN); -+ - /* Flush the FDB table */ - ret = mt7530_fdb_cmd(priv, MT7530_FDB_FLUSH, NULL); - if (ret < 0) ---- a/drivers/net/dsa/mt7530.h -+++ b/drivers/net/dsa/mt7530.h -@@ -32,6 +32,10 @@ enum mt753x_id { - #define SYSC_REG_RSTCTRL 0x34 - #define RESET_MCM BIT(2) - -+/* Register for ARL global control */ -+#define MT753X_AGC 0xc -+#define LOCAL_EN BIT(7) -+ - /* Registers to mac forward control for unknown frames */ - #define MT7530_MFC 0x10 - #define BC_FFP(x) (((x) & 0xff) << 24) diff --git a/target/linux/generic/backport-6.1/790-51-v6.10-net-dsa-mt7530-fix-port-mirroring-for-MT7988-SoC-swi.patch b/target/linux/generic/backport-6.1/790-51-v6.10-net-dsa-mt7530-fix-port-mirroring-for-MT7988-SoC-swi.patch index 304ea21adc..cd5b7b287d 100644 --- a/target/linux/generic/backport-6.1/790-51-v6.10-net-dsa-mt7530-fix-port-mirroring-for-MT7988-SoC-swi.patch +++ b/target/linux/generic/backport-6.1/790-51-v6.10-net-dsa-mt7530-fix-port-mirroring-for-MT7988-SoC-swi.patch @@ -26,7 +26,7 @@ Signed-off-by: David S. Miller --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -1876,14 +1876,16 @@ mt7530_port_vlan_del(struct dsa_switch * +@@ -1890,14 +1890,16 @@ mt7530_port_vlan_del(struct dsa_switch * static int mt753x_mirror_port_get(unsigned int id, u32 val) { diff --git a/target/linux/generic/backport-6.1/790-52-v6.10-net-dsa-mt7530-mdio-read-PHY-address-of-switch-from-.patch b/target/linux/generic/backport-6.1/790-52-v6.10-net-dsa-mt7530-mdio-read-PHY-address-of-switch-from-.patch index 6b6a255e26..e9c8f955c9 100644 --- a/target/linux/generic/backport-6.1/790-52-v6.10-net-dsa-mt7530-mdio-read-PHY-address-of-switch-from-.patch +++ b/target/linux/generic/backport-6.1/790-52-v6.10-net-dsa-mt7530-mdio-read-PHY-address-of-switch-from-.patch @@ -184,7 +184,7 @@ Signed-off-by: Paolo Abeni err: if (ret < 0) dev_err(&bus->dev, -@@ -2670,16 +2678,19 @@ mt7531_setup(struct dsa_switch *ds) +@@ -2684,16 +2692,19 @@ mt7531_setup(struct dsa_switch *ds) * phy_[read,write]_mmd_indirect is called, we provide our own * mt7531_ind_mmd_phy_[read,write] to complete this function. */ diff --git a/target/linux/generic/backport-6.1/790-55-v6.10-net-dsa-mt7530-refactor-MT7530_PMCR_P.patch b/target/linux/generic/backport-6.1/790-55-v6.10-net-dsa-mt7530-refactor-MT7530_PMCR_P.patch index 3cbd62e929..158e5f8c00 100644 --- a/target/linux/generic/backport-6.1/790-55-v6.10-net-dsa-mt7530-refactor-MT7530_PMCR_P.patch +++ b/target/linux/generic/backport-6.1/790-55-v6.10-net-dsa-mt7530-refactor-MT7530_PMCR_P.patch @@ -33,7 +33,7 @@ Signed-off-by: Arınç ÜNAL --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -889,7 +889,7 @@ static void mt7530_setup_port5(struct ds +@@ -903,7 +903,7 @@ static void mt7530_setup_port5(struct ds val &= ~MHWTRAP_P5_MAC_SEL & ~MHWTRAP_P5_DIS; /* Setup the MAC by default for the cpu port */ @@ -42,7 +42,7 @@ Signed-off-by: Arınç ÜNAL break; case P5_INTF_SEL_GMAC5: /* MT7530_P5_MODE_GMAC: P5 -> External phy or 2nd GMAC */ -@@ -2435,8 +2435,8 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2449,8 +2449,8 @@ mt7530_setup(struct dsa_switch *ds) /* Clear link settings and enable force mode to force link down * on all ports until they're enabled later. */ @@ -53,7 +53,7 @@ Signed-off-by: Arınç ÜNAL /* Disable forwarding by default on all ports */ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, -@@ -2546,8 +2546,8 @@ mt7531_setup_common(struct dsa_switch *d +@@ -2560,8 +2560,8 @@ mt7531_setup_common(struct dsa_switch *d /* Clear link settings and enable force mode to force link down * on all ports until they're enabled later. */ @@ -64,7 +64,7 @@ Signed-off-by: Arınç ÜNAL /* Disable forwarding by default on all ports */ mt7530_rmw(priv, MT7530_PCR_P(i), PCR_MATRIX_MASK, -@@ -2630,7 +2630,7 @@ mt7531_setup(struct dsa_switch *ds) +@@ -2644,7 +2644,7 @@ mt7531_setup(struct dsa_switch *ds) /* Force link down on all ports before internal reset */ for (i = 0; i < MT7530_NUM_PORTS; i++) @@ -73,7 +73,7 @@ Signed-off-by: Arınç ÜNAL /* Reset the switch through internal reset */ mt7530_write(priv, MT7530_SYS_CTRL, SYS_CTRL_SW_RST | SYS_CTRL_REG_RST); -@@ -2872,7 +2872,7 @@ mt753x_phylink_mac_config(struct phylink +@@ -2886,7 +2886,7 @@ mt753x_phylink_mac_config(struct phylink /* Are we connected to external phy */ if (port == 5 && dsa_is_user_port(ds, 5)) @@ -82,7 +82,7 @@ Signed-off-by: Arınç ÜNAL } static void mt753x_phylink_mac_link_down(struct phylink_config *config, -@@ -2882,7 +2882,7 @@ static void mt753x_phylink_mac_link_down +@@ -2896,7 +2896,7 @@ static void mt753x_phylink_mac_link_down struct dsa_port *dp = dsa_phylink_to_port(config); struct mt7530_priv *priv = dp->ds->priv; @@ -91,7 +91,7 @@ Signed-off-by: Arınç ÜNAL } static void mt753x_phylink_mac_link_up(struct phylink_config *config, -@@ -2896,7 +2896,7 @@ static void mt753x_phylink_mac_link_up(s +@@ -2910,7 +2910,7 @@ static void mt753x_phylink_mac_link_up(s struct mt7530_priv *priv = dp->ds->priv; u32 mcr; @@ -100,7 +100,7 @@ Signed-off-by: Arınç ÜNAL switch (speed) { case SPEED_1000: -@@ -2911,9 +2911,9 @@ static void mt753x_phylink_mac_link_up(s +@@ -2925,9 +2925,9 @@ static void mt753x_phylink_mac_link_up(s if (duplex == DUPLEX_FULL) { mcr |= PMCR_FORCE_FDX; if (tx_pause) @@ -112,7 +112,7 @@ Signed-off-by: Arınç ÜNAL } if (mode == MLO_AN_PHY && phydev && phy_init_eee(phydev, false) >= 0) { -@@ -2928,7 +2928,7 @@ static void mt753x_phylink_mac_link_up(s +@@ -2942,7 +2942,7 @@ static void mt753x_phylink_mac_link_up(s } } diff --git a/target/linux/generic/backport-6.1/790-56-v6.10-net-dsa-mt7530-rename-p5_intf_sel-and-use-only-for-M.patch b/target/linux/generic/backport-6.1/790-56-v6.10-net-dsa-mt7530-rename-p5_intf_sel-and-use-only-for-M.patch index 9697e7eb4f..9a0ce7c36c 100644 --- a/target/linux/generic/backport-6.1/790-56-v6.10-net-dsa-mt7530-rename-p5_intf_sel-and-use-only-for-M.patch +++ b/target/linux/generic/backport-6.1/790-56-v6.10-net-dsa-mt7530-rename-p5_intf_sel-and-use-only-for-M.patch @@ -25,7 +25,7 @@ Signed-off-by: Arınç ÜNAL --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -850,19 +850,15 @@ mt7530_set_ageing_time(struct dsa_switch +@@ -864,19 +864,15 @@ mt7530_set_ageing_time(struct dsa_switch return 0; } @@ -52,7 +52,7 @@ Signed-off-by: Arınç ÜNAL } } -@@ -879,23 +875,23 @@ static void mt7530_setup_port5(struct ds +@@ -893,23 +889,23 @@ static void mt7530_setup_port5(struct ds val |= MHWTRAP_MANUAL | MHWTRAP_P5_MAC_SEL | MHWTRAP_P5_DIS; val &= ~MHWTRAP_P5_RGMII_MODE & ~MHWTRAP_PHY0_SEL; @@ -85,7 +85,7 @@ Signed-off-by: Arınç ÜNAL break; } -@@ -923,8 +919,8 @@ static void mt7530_setup_port5(struct ds +@@ -937,8 +933,8 @@ static void mt7530_setup_port5(struct ds mt7530_write(priv, MT7530_MHWTRAP, val); @@ -96,7 +96,7 @@ Signed-off-by: Arınç ÜNAL mutex_unlock(&priv->reg_mutex); } -@@ -2467,13 +2463,11 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2481,13 +2477,11 @@ mt7530_setup(struct dsa_switch *ds) if (ret) return ret; @@ -114,7 +114,7 @@ Signed-off-by: Arınç ÜNAL */ for_each_child_of_node(dn, mac_np) { if (!of_device_is_compatible(mac_np, -@@ -2497,17 +2491,16 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2511,17 +2505,16 @@ mt7530_setup(struct dsa_switch *ds) } id = of_mdio_parse_addr(ds->dev, phy_node); if (id == 0) @@ -135,7 +135,7 @@ Signed-off-by: Arınç ÜNAL mt7530_setup_port5(ds, interface); } -@@ -2645,9 +2638,6 @@ mt7531_setup(struct dsa_switch *ds) +@@ -2659,9 +2652,6 @@ mt7531_setup(struct dsa_switch *ds) MT7531_EXT_P_MDIO_12); } diff --git a/target/linux/generic/backport-6.1/790-57-v6.10-net-dsa-mt7530-rename-mt753x_bpdu_port_fw-enum-to-mt.patch b/target/linux/generic/backport-6.1/790-57-v6.10-net-dsa-mt7530-rename-mt753x_bpdu_port_fw-enum-to-mt.patch index 77a2df8586..c8ffd5f07c 100644 --- a/target/linux/generic/backport-6.1/790-57-v6.10-net-dsa-mt7530-rename-mt753x_bpdu_port_fw-enum-to-mt.patch +++ b/target/linux/generic/backport-6.1/790-57-v6.10-net-dsa-mt7530-rename-mt753x_bpdu_port_fw-enum-to-mt.patch @@ -21,7 +21,7 @@ Signed-off-by: Arınç ÜNAL --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -1100,42 +1100,34 @@ mt753x_trap_frames(struct mt7530_priv *p +@@ -1114,42 +1114,34 @@ mt753x_trap_frames(struct mt7530_priv *p * VLAN-untagged. */ mt7530_rmw(priv, MT753X_BPC, diff --git a/target/linux/generic/backport-6.1/790-58-v6.10-net-dsa-mt7530-refactor-MT7530_MFC-and-MT7531_CFC-ad.patch b/target/linux/generic/backport-6.1/790-58-v6.10-net-dsa-mt7530-refactor-MT7530_MFC-and-MT7531_CFC-ad.patch index 95cdfac02e..c977fe46cd 100644 --- a/target/linux/generic/backport-6.1/790-58-v6.10-net-dsa-mt7530-refactor-MT7530_MFC-and-MT7531_CFC-ad.patch +++ b/target/linux/generic/backport-6.1/790-58-v6.10-net-dsa-mt7530-refactor-MT7530_MFC-and-MT7531_CFC-ad.patch @@ -25,7 +25,7 @@ Signed-off-by: Arınç ÜNAL --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -1140,7 +1140,7 @@ mt753x_cpu_port_enable(struct dsa_switch +@@ -1154,7 +1154,7 @@ mt753x_cpu_port_enable(struct dsa_switch PORT_SPEC_TAG); /* Enable flooding on the CPU port */ @@ -33,8 +33,8 @@ Signed-off-by: Arınç ÜNAL + mt7530_set(priv, MT753X_MFC, BC_FFP(BIT(port)) | UNM_FFP(BIT(port)) | UNU_FFP(BIT(port))); - /* Add the CPU port to the CPU port bitmap for MT7531 and the switch on -@@ -1304,15 +1304,15 @@ mt7530_port_bridge_flags(struct dsa_swit + /* Add the CPU port to the CPU port bitmap for MT7531. Trapped frames +@@ -1318,15 +1318,15 @@ mt7530_port_bridge_flags(struct dsa_swit flags.val & BR_LEARNING ? 0 : SA_DIS); if (flags.mask & BR_FLOOD) @@ -53,7 +53,7 @@ Signed-off-by: Arınç ÜNAL flags.val & BR_BCAST_FLOOD ? BC_FFP(BIT(port)) : 0); return 0; -@@ -1848,20 +1848,6 @@ mt7530_port_vlan_del(struct dsa_switch * +@@ -1862,20 +1862,6 @@ mt7530_port_vlan_del(struct dsa_switch * return 0; } @@ -74,7 +74,7 @@ Signed-off-by: Arınç ÜNAL static int mt753x_port_mirror_add(struct dsa_switch *ds, int port, struct dsa_mall_mirror_tc_entry *mirror, bool ingress, struct netlink_ext_ack *extack) -@@ -1877,14 +1863,14 @@ static int mt753x_port_mirror_add(struct +@@ -1891,14 +1877,14 @@ static int mt753x_port_mirror_add(struct val = mt7530_read(priv, MT753X_MIRROR_REG(priv->id)); /* MT7530 only supports one monitor port */ @@ -92,7 +92,7 @@ Signed-off-by: Arınç ÜNAL mt7530_write(priv, MT753X_MIRROR_REG(priv->id), val); val = mt7530_read(priv, MT7530_PCR_P(port)); -@@ -2524,7 +2510,7 @@ mt7531_setup_common(struct dsa_switch *d +@@ -2538,7 +2524,7 @@ mt7531_setup_common(struct dsa_switch *d mt7530_mib_reset(ds); /* Disable flooding on all ports */ @@ -101,7 +101,7 @@ Signed-off-by: Arınç ÜNAL UNU_FFP_MASK); for (i = 0; i < MT7530_NUM_PORTS; i++) { -@@ -3086,10 +3072,12 @@ mt753x_conduit_state_change(struct dsa_s +@@ -3100,10 +3086,12 @@ mt753x_conduit_state_change(struct dsa_s else priv->active_cpu_ports &= ~mask; diff --git a/target/linux/generic/backport-6.1/790-59-v6.10-net-dsa-mt7530-refactor-MT7530_HWTRAP-and-MT7530_MHW.patch b/target/linux/generic/backport-6.1/790-59-v6.10-net-dsa-mt7530-refactor-MT7530_HWTRAP-and-MT7530_MHW.patch index d2497d5c90..3c487d21f6 100644 --- a/target/linux/generic/backport-6.1/790-59-v6.10-net-dsa-mt7530-refactor-MT7530_HWTRAP-and-MT7530_MHW.patch +++ b/target/linux/generic/backport-6.1/790-59-v6.10-net-dsa-mt7530-refactor-MT7530_HWTRAP-and-MT7530_MHW.patch @@ -30,7 +30,7 @@ Signed-off-by: Arınç ÜNAL --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -403,23 +403,23 @@ mt7530_setup_port6(struct dsa_switch *ds +@@ -417,23 +417,23 @@ mt7530_setup_port6(struct dsa_switch *ds mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1)); @@ -60,7 +60,7 @@ Signed-off-by: Arınç ÜNAL ncpo1 = 0x1400; } -@@ -442,19 +442,20 @@ mt7530_setup_port6(struct dsa_switch *ds +@@ -456,19 +456,20 @@ mt7530_setup_port6(struct dsa_switch *ds static void mt7531_pll_setup(struct mt7530_priv *priv) { @@ -86,7 +86,7 @@ Signed-off-by: Arınç ÜNAL /* Step 1 : Disable MT7531 COREPLL */ val = mt7530_read(priv, MT7531_PLLGP_EN); -@@ -483,13 +484,13 @@ mt7531_pll_setup(struct mt7530_priv *pri +@@ -497,13 +498,13 @@ mt7531_pll_setup(struct mt7530_priv *pri usleep_range(25, 35); switch (xtal) { @@ -102,7 +102,7 @@ Signed-off-by: Arınç ÜNAL val = mt7530_read(priv, MT7531_PLLGP_CR0); val &= ~RG_COREPLL_SDM_PCW_M; val |= 0x190000 << RG_COREPLL_SDM_PCW_S; -@@ -870,20 +871,20 @@ static void mt7530_setup_port5(struct ds +@@ -884,20 +885,20 @@ static void mt7530_setup_port5(struct ds mutex_lock(&priv->reg_mutex); @@ -128,7 +128,7 @@ Signed-off-by: Arınç ÜNAL /* Setup the MAC by default for the cpu port */ mt7530_write(priv, MT753X_PMCR_P(5), 0x56300); -@@ -891,13 +892,13 @@ static void mt7530_setup_port5(struct ds +@@ -905,13 +906,13 @@ static void mt7530_setup_port5(struct ds /* GMAC5: P5 -> SoC MAC or external PHY */ default: @@ -144,7 +144,7 @@ Signed-off-by: Arınç ÜNAL /* P5 RGMII RX Clock Control: delay setting for 1000M */ mt7530_write(priv, MT7530_P5RGMIIRXCR, CSR_RGMII_EDGE_ALIGN); -@@ -917,7 +918,7 @@ static void mt7530_setup_port5(struct ds +@@ -931,7 +932,7 @@ static void mt7530_setup_port5(struct ds P5_IO_CLK_DRV(1) | P5_IO_DATA_DRV(1)); } @@ -153,7 +153,7 @@ Signed-off-by: Arınç ÜNAL dev_dbg(ds->dev, "Setup P5, HWTRAP=0x%x, mode=%s, phy-mode=%s\n", val, mt7530_p5_mode_str(priv->p5_mode), phy_modes(interface)); -@@ -2356,7 +2357,7 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2370,7 +2371,7 @@ mt7530_setup(struct dsa_switch *ds) } /* Waiting for MT7530 got to stable */ @@ -162,7 +162,7 @@ Signed-off-by: Arınç ÜNAL ret = readx_poll_timeout(_mt7530_read, &p, val, val != 0, 20, 1000000); if (ret < 0) { -@@ -2371,7 +2372,7 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2385,7 +2386,7 @@ mt7530_setup(struct dsa_switch *ds) return -ENODEV; } @@ -171,7 +171,7 @@ Signed-off-by: Arınç ÜNAL dev_err(priv->dev, "MT7530 with a 20MHz XTAL is not supported!\n"); return -EINVAL; -@@ -2392,12 +2393,12 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2406,12 +2407,12 @@ mt7530_setup(struct dsa_switch *ds) RD_TAP_MASK, RD_TAP(16)); /* Enable port 6 */ @@ -189,7 +189,7 @@ Signed-off-by: Arınç ÜNAL mt7530_pll_setup(priv); mt753x_trap_frames(priv); -@@ -2577,7 +2578,7 @@ mt7531_setup(struct dsa_switch *ds) +@@ -2591,7 +2592,7 @@ mt7531_setup(struct dsa_switch *ds) } /* Waiting for MT7530 got to stable */ diff --git a/target/linux/generic/backport-6.1/790-60-v6.10-net-dsa-mt7530-move-MT753X_MTRAP-operations-for-MT75.patch b/target/linux/generic/backport-6.1/790-60-v6.10-net-dsa-mt7530-move-MT753X_MTRAP-operations-for-MT75.patch index e7da939588..cfc38f81d0 100644 --- a/target/linux/generic/backport-6.1/790-60-v6.10-net-dsa-mt7530-move-MT753X_MTRAP-operations-for-MT75.patch +++ b/target/linux/generic/backport-6.1/790-60-v6.10-net-dsa-mt7530-move-MT753X_MTRAP-operations-for-MT75.patch @@ -28,7 +28,7 @@ Signed-off-by: Arınç ÜNAL --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -873,8 +873,7 @@ static void mt7530_setup_port5(struct ds +@@ -887,8 +887,7 @@ static void mt7530_setup_port5(struct ds val = mt7530_read(priv, MT753X_MTRAP); @@ -38,7 +38,7 @@ Signed-off-by: Arınç ÜNAL switch (priv->p5_mode) { /* MUX_PHY_P0: P0 -> P5 -> SoC MAC */ -@@ -884,15 +883,13 @@ static void mt7530_setup_port5(struct ds +@@ -898,15 +897,13 @@ static void mt7530_setup_port5(struct ds /* MUX_PHY_P4: P4 -> P5 -> SoC MAC */ case MUX_PHY_P4: @@ -55,7 +55,7 @@ Signed-off-by: Arınç ÜNAL break; } -@@ -1186,6 +1183,14 @@ mt7530_port_enable(struct dsa_switch *ds +@@ -1200,6 +1197,14 @@ mt7530_port_enable(struct dsa_switch *ds mutex_unlock(&priv->reg_mutex); @@ -70,7 +70,7 @@ Signed-off-by: Arınç ÜNAL return 0; } -@@ -1204,6 +1209,14 @@ mt7530_port_disable(struct dsa_switch *d +@@ -1218,6 +1223,14 @@ mt7530_port_disable(struct dsa_switch *d PCR_MATRIX_CLR); mutex_unlock(&priv->reg_mutex); @@ -85,7 +85,7 @@ Signed-off-by: Arınç ÜNAL } static int -@@ -2392,11 +2405,11 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2406,11 +2419,11 @@ mt7530_setup(struct dsa_switch *ds) mt7530_rmw(priv, MT7530_TRGMII_RD(i), RD_TAP_MASK, RD_TAP(16)); @@ -102,7 +102,7 @@ Signed-off-by: Arınç ÜNAL if ((val & MT7530_XTAL_MASK) == MT7530_XTAL_40MHZ) mt7530_pll_setup(priv); -@@ -2479,8 +2492,11 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2493,8 +2506,11 @@ mt7530_setup(struct dsa_switch *ds) break; } diff --git a/target/linux/generic/backport-6.1/790-61-v6.10-net-dsa-mt7530-return-mt7530_setup_mdio-mt7531_setup.patch b/target/linux/generic/backport-6.1/790-61-v6.10-net-dsa-mt7530-return-mt7530_setup_mdio-mt7531_setup.patch index 7cc145327c..178ac8022f 100644 --- a/target/linux/generic/backport-6.1/790-61-v6.10-net-dsa-mt7530-return-mt7530_setup_mdio-mt7531_setup.patch +++ b/target/linux/generic/backport-6.1/790-61-v6.10-net-dsa-mt7530-return-mt7530_setup_mdio-mt7531_setup.patch @@ -17,7 +17,7 @@ Signed-off-by: Arınç ÜNAL --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2658,7 +2658,9 @@ mt7531_setup(struct dsa_switch *ds) +@@ -2672,7 +2672,9 @@ mt7531_setup(struct dsa_switch *ds) 0); } @@ -28,7 +28,7 @@ Signed-off-by: Arınç ÜNAL /* Setup VLAN ID 0 for VLAN-unaware bridges */ ret = mt7530_setup_vlan0(priv); -@@ -3017,6 +3019,8 @@ mt753x_setup(struct dsa_switch *ds) +@@ -3031,6 +3033,8 @@ mt753x_setup(struct dsa_switch *ds) ret = mt7530_setup_mdio(priv); if (ret && priv->irq) mt7530_free_irq_common(priv); diff --git a/target/linux/generic/backport-6.1/790-62-v6.10-net-dsa-mt7530-define-MAC-speed-capabilities-per-swi.patch b/target/linux/generic/backport-6.1/790-62-v6.10-net-dsa-mt7530-define-MAC-speed-capabilities-per-swi.patch index f4d19db274..af8edf5a42 100644 --- a/target/linux/generic/backport-6.1/790-62-v6.10-net-dsa-mt7530-define-MAC-speed-capabilities-per-swi.patch +++ b/target/linux/generic/backport-6.1/790-62-v6.10-net-dsa-mt7530-define-MAC-speed-capabilities-per-swi.patch @@ -24,7 +24,7 @@ Signed-off-by: Arınç ÜNAL --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2676,6 +2676,8 @@ mt7531_setup(struct dsa_switch *ds) +@@ -2690,6 +2690,8 @@ mt7531_setup(struct dsa_switch *ds) static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) { @@ -33,7 +33,7 @@ Signed-off-by: Arınç ÜNAL switch (port) { /* Ports which are connected to switch PHYs. There is no MII pinout. */ case 0 ... 4: -@@ -2707,6 +2709,8 @@ static void mt7531_mac_port_get_caps(str +@@ -2721,6 +2723,8 @@ static void mt7531_mac_port_get_caps(str { struct mt7530_priv *priv = ds->priv; @@ -42,7 +42,7 @@ Signed-off-by: Arınç ÜNAL switch (port) { /* Ports which are connected to switch PHYs. There is no MII pinout. */ case 0 ... 4: -@@ -2746,14 +2750,17 @@ static void mt7988_mac_port_get_caps(str +@@ -2760,14 +2764,17 @@ static void mt7988_mac_port_get_caps(str case 0 ... 3: __set_bit(PHY_INTERFACE_MODE_INTERNAL, config->supported_interfaces); @@ -62,7 +62,7 @@ Signed-off-by: Arınç ÜNAL } } -@@ -2923,9 +2930,7 @@ static void mt753x_phylink_get_caps(stru +@@ -2937,9 +2944,7 @@ static void mt753x_phylink_get_caps(stru { struct mt7530_priv *priv = ds->priv; diff --git a/target/linux/generic/backport-6.1/790-63-v6.10-net-dsa-mt7530-get-rid-of-function-sanity-check.patch b/target/linux/generic/backport-6.1/790-63-v6.10-net-dsa-mt7530-get-rid-of-function-sanity-check.patch index 5bb7756c51..3825952dc3 100644 --- a/target/linux/generic/backport-6.1/790-63-v6.10-net-dsa-mt7530-get-rid-of-function-sanity-check.patch +++ b/target/linux/generic/backport-6.1/790-63-v6.10-net-dsa-mt7530-get-rid-of-function-sanity-check.patch @@ -17,7 +17,7 @@ Signed-off-by: Arınç ÜNAL --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -3220,13 +3220,6 @@ mt7530_probe_common(struct mt7530_priv * +@@ -3235,13 +3235,6 @@ mt7530_probe_common(struct mt7530_priv * if (!priv->info) return -EINVAL; diff --git a/target/linux/generic/backport-6.1/790-64-v6.10-net-dsa-mt7530-refactor-MT7530_PMEEECR_P.patch b/target/linux/generic/backport-6.1/790-64-v6.10-net-dsa-mt7530-refactor-MT7530_PMEEECR_P.patch index f8147b6412..df47458014 100644 --- a/target/linux/generic/backport-6.1/790-64-v6.10-net-dsa-mt7530-refactor-MT7530_PMEEECR_P.patch +++ b/target/linux/generic/backport-6.1/790-64-v6.10-net-dsa-mt7530-refactor-MT7530_PMEEECR_P.patch @@ -19,7 +19,7 @@ Signed-off-by: Arınç ÜNAL --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -3048,10 +3048,10 @@ static int mt753x_get_mac_eee(struct dsa +@@ -3062,10 +3062,10 @@ static int mt753x_get_mac_eee(struct dsa struct ethtool_eee *e) { struct mt7530_priv *priv = ds->priv; @@ -32,7 +32,7 @@ Signed-off-by: Arınç ÜNAL return 0; } -@@ -3065,11 +3065,11 @@ static int mt753x_set_mac_eee(struct dsa +@@ -3079,11 +3079,11 @@ static int mt753x_set_mac_eee(struct dsa if (e->tx_lpi_timer > 0xFFF) return -EINVAL; diff --git a/target/linux/generic/backport-6.1/790-66-v6.10-net-dsa-mt7530-use-priv-ds-num_ports-instead-of-MT75.patch b/target/linux/generic/backport-6.1/790-66-v6.10-net-dsa-mt7530-use-priv-ds-num_ports-instead-of-MT75.patch index 0037f97499..e9512421c2 100644 --- a/target/linux/generic/backport-6.1/790-66-v6.10-net-dsa-mt7530-use-priv-ds-num_ports-instead-of-MT75.patch +++ b/target/linux/generic/backport-6.1/790-66-v6.10-net-dsa-mt7530-use-priv-ds-num_ports-instead-of-MT75.patch @@ -19,7 +19,7 @@ Signed-off-by: Arınç ÜNAL --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -1404,7 +1404,7 @@ mt7530_port_set_vlan_unaware(struct dsa_ +@@ -1418,7 +1418,7 @@ mt7530_port_set_vlan_unaware(struct dsa_ mt7530_rmw(priv, MT7530_PPBV1_P(port), G0_PORT_VID_MASK, G0_PORT_VID_DEF); @@ -28,7 +28,7 @@ Signed-off-by: Arınç ÜNAL if (dsa_is_user_port(ds, i) && dsa_port_is_vlan_filtering(dsa_to_port(ds, i))) { all_user_ports_removed = false; -@@ -2419,7 +2419,7 @@ mt7530_setup(struct dsa_switch *ds) +@@ -2433,7 +2433,7 @@ mt7530_setup(struct dsa_switch *ds) /* Enable and reset MIB counters */ mt7530_mib_reset(ds); @@ -37,7 +37,7 @@ Signed-off-by: Arınç ÜNAL /* Clear link settings and enable force mode to force link down * on all ports until they're enabled later. */ -@@ -2530,7 +2530,7 @@ mt7531_setup_common(struct dsa_switch *d +@@ -2544,7 +2544,7 @@ mt7531_setup_common(struct dsa_switch *d mt7530_clear(priv, MT753X_MFC, BC_FFP_MASK | UNM_FFP_MASK | UNU_FFP_MASK); @@ -46,7 +46,7 @@ Signed-off-by: Arınç ÜNAL /* Clear link settings and enable force mode to force link down * on all ports until they're enabled later. */ -@@ -2617,7 +2617,7 @@ mt7531_setup(struct dsa_switch *ds) +@@ -2631,7 +2631,7 @@ mt7531_setup(struct dsa_switch *ds) priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN); /* Force link down on all ports before internal reset */ diff --git a/target/linux/generic/backport-6.1/790-67-v6.10-net-dsa-mt7530-do-not-pass-port-variable-to-mt7531_r.patch b/target/linux/generic/backport-6.1/790-67-v6.10-net-dsa-mt7530-do-not-pass-port-variable-to-mt7531_r.patch index ee8e13ea70..3b3330bdce 100644 --- a/target/linux/generic/backport-6.1/790-67-v6.10-net-dsa-mt7530-do-not-pass-port-variable-to-mt7531_r.patch +++ b/target/linux/generic/backport-6.1/790-67-v6.10-net-dsa-mt7530-do-not-pass-port-variable-to-mt7531_r.patch @@ -17,7 +17,7 @@ Signed-off-by: Arınç ÜNAL --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2776,7 +2776,7 @@ mt7530_mac_config(struct dsa_switch *ds, +@@ -2790,7 +2790,7 @@ mt7530_mac_config(struct dsa_switch *ds, mt7530_setup_port6(priv->ds, interface); } @@ -26,7 +26,7 @@ Signed-off-by: Arınç ÜNAL phy_interface_t interface, struct phy_device *phydev) { -@@ -2827,7 +2827,7 @@ mt7531_mac_config(struct dsa_switch *ds, +@@ -2841,7 +2841,7 @@ mt7531_mac_config(struct dsa_switch *ds, if (phy_interface_mode_is_rgmii(interface)) { dp = dsa_to_port(ds, port); phydev = dp->slave->phydev; diff --git a/target/linux/generic/backport-6.1/790-68-v6.10-net-dsa-mt7530-explain-exposing-MDIO-bus-of-MT7531AE.patch b/target/linux/generic/backport-6.1/790-68-v6.10-net-dsa-mt7530-explain-exposing-MDIO-bus-of-MT7531AE.patch index 666bcb75e8..6d28e5b5f9 100644 --- a/target/linux/generic/backport-6.1/790-68-v6.10-net-dsa-mt7530-explain-exposing-MDIO-bus-of-MT7531AE.patch +++ b/target/linux/generic/backport-6.1/790-68-v6.10-net-dsa-mt7530-explain-exposing-MDIO-bus-of-MT7531AE.patch @@ -19,7 +19,7 @@ Signed-off-by: Arınç ÜNAL --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -2626,7 +2626,10 @@ mt7531_setup(struct dsa_switch *ds) +@@ -2640,7 +2640,10 @@ mt7531_setup(struct dsa_switch *ds) if (!priv->p5_sgmii) { mt7531_pll_setup(priv); } else { diff --git a/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch b/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch index dfbe88e8e6..2729a0ec38 100644 --- a/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch +++ b/target/linux/generic/hack-6.1/780-usb-net-MeigLink_modem_support.patch @@ -43,7 +43,7 @@ Subject: [PATCH] net/usb/qmi_wwan: add MeigLink modem support #define QUECTEL_VENDOR_ID 0x2c7c /* These Quectel products use Quectel's vendor ID */ -@@ -1152,6 +1157,11 @@ static const struct usb_device_id option +@@ -1156,6 +1161,11 @@ static const struct usb_device_id option { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000), /* SIMCom SIM5218 */ .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | NCTRL(3) | RSVD(4) }, @@ -55,7 +55,7 @@ Subject: [PATCH] net/usb/qmi_wwan: add MeigLink modem support /* Quectel products using Qualcomm vendor ID */ { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)}, { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20), -@@ -1193,6 +1203,11 @@ static const struct usb_device_id option +@@ -1197,6 +1207,11 @@ static const struct usb_device_id option .driver_info = ZLP }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), .driver_info = RSVD(4) }, diff --git a/target/linux/generic/pending-6.1/150-bridge_allow_receiption_on_disabled_port.patch b/target/linux/generic/pending-6.1/150-bridge_allow_receiption_on_disabled_port.patch index 93a2d146b5..ac4a3138a5 100644 --- a/target/linux/generic/pending-6.1/150-bridge_allow_receiption_on_disabled_port.patch +++ b/target/linux/generic/pending-6.1/150-bridge_allow_receiption_on_disabled_port.patch @@ -15,7 +15,7 @@ Signed-off-by: Felix Fietkau --- a/net/bridge/br_input.c +++ b/net/bridge/br_input.c -@@ -222,6 +222,9 @@ static void __br_handle_local_finish(str +@@ -227,6 +227,9 @@ static void __br_handle_local_finish(str /* note: already called with rcu_read_lock */ static int br_handle_local_finish(struct net *net, struct sock *sk, struct sk_buff *skb) { @@ -25,7 +25,7 @@ Signed-off-by: Felix Fietkau __br_handle_local_finish(skb); /* return 1 to signal the okfn() was called so it's ok to use the skb */ -@@ -390,6 +393,17 @@ forward: +@@ -397,6 +400,17 @@ forward: goto defer_stp_filtering; switch (p->state) { diff --git a/target/linux/generic/pending-6.1/610-netfilter_match_bypass_default_checks.patch b/target/linux/generic/pending-6.1/610-netfilter_match_bypass_default_checks.patch index 56d62ab8e2..0ab89564ee 100644 --- a/target/linux/generic/pending-6.1/610-netfilter_match_bypass_default_checks.patch +++ b/target/linux/generic/pending-6.1/610-netfilter_match_bypass_default_checks.patch @@ -91,7 +91,7 @@ Signed-off-by: Felix Fietkau for (i = sizeof(struct ipt_entry); i < e->target_offset; i += m->u.match_size) { -@@ -1225,12 +1262,15 @@ compat_copy_entry_to_user(struct ipt_ent +@@ -1227,12 +1264,15 @@ compat_copy_entry_to_user(struct ipt_ent compat_uint_t origsize; const struct xt_entry_match *ematch; int ret = 0; diff --git a/target/linux/generic/pending-6.1/701-netfilter-nf_tables-ignore-EOPNOTSUPP-on-flowtable-d.patch b/target/linux/generic/pending-6.1/701-netfilter-nf_tables-ignore-EOPNOTSUPP-on-flowtable-d.patch index fb6eb73232..9f8c3d6ff5 100644 --- a/target/linux/generic/pending-6.1/701-netfilter-nf_tables-ignore-EOPNOTSUPP-on-flowtable-d.patch +++ b/target/linux/generic/pending-6.1/701-netfilter-nf_tables-ignore-EOPNOTSUPP-on-flowtable-d.patch @@ -18,7 +18,7 @@ Signed-off-by: Felix Fietkau --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c -@@ -7951,7 +7951,7 @@ static int nft_register_flowtable_net_ho +@@ -7959,7 +7959,7 @@ static int nft_register_flowtable_net_ho err = flowtable->data.type->setup(&flowtable->data, hook->ops.dev, FLOW_BLOCK_BIND); diff --git a/target/linux/generic/pending-6.1/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch b/target/linux/generic/pending-6.1/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch index 989aca8f35..20d1c13045 100644 --- a/target/linux/generic/pending-6.1/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch +++ b/target/linux/generic/pending-6.1/710-bridge-add-knob-for-filtering-rx-tx-BPDU-pack.patch @@ -45,7 +45,7 @@ Signed-off-by: Felix Fietkau if (!(p->flags & BR_BCAST_FLOOD) && skb->dev != br->dev) --- a/net/bridge/br_input.c +++ b/net/bridge/br_input.c -@@ -344,6 +344,8 @@ static rx_handler_result_t br_handle_fra +@@ -349,6 +349,8 @@ static rx_handler_result_t br_handle_fra fwd_mask |= p->group_fwd_mask; switch (dest[5]) { case 0x00: /* Bridge Group Address */ diff --git a/target/linux/generic/pending-6.1/795-01-net-dsa-mt7530-do-not-set-MT7530_P5_DIS-when-PHY-.patch b/target/linux/generic/pending-6.1/795-01-net-dsa-mt7530-do-not-set-MT7530_P5_DIS-when-PHY-.patch index da3fd7cbe1..04d8c8760f 100644 --- a/target/linux/generic/pending-6.1/795-01-net-dsa-mt7530-do-not-set-MT7530_P5_DIS-when-PHY-.patch +++ b/target/linux/generic/pending-6.1/795-01-net-dsa-mt7530-do-not-set-MT7530_P5_DIS-when-PHY-.patch @@ -68,7 +68,7 @@ Best regards, --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c -@@ -1213,7 +1213,7 @@ mt7530_port_disable(struct dsa_switch *d +@@ -1227,7 +1227,7 @@ mt7530_port_disable(struct dsa_switch *d if (priv->id != ID_MT7530 && priv->id != ID_MT7621) return; diff --git a/target/linux/generic/pending-6.1/811-pci_disable_usb_common_quirks.patch b/target/linux/generic/pending-6.1/811-pci_disable_usb_common_quirks.patch index 98ea4c06d9..fcb77e5174 100644 --- a/target/linux/generic/pending-6.1/811-pci_disable_usb_common_quirks.patch +++ b/target/linux/generic/pending-6.1/811-pci_disable_usb_common_quirks.patch @@ -19,7 +19,7 @@ Signed-off-by: Felix Fietkau static struct amd_chipset_info { struct pci_dev *nb_dev; struct pci_dev *smbus_dev; -@@ -633,6 +635,10 @@ bool usb_amd_pt_check_port(struct device +@@ -631,6 +633,10 @@ bool usb_amd_pt_check_port(struct device } EXPORT_SYMBOL_GPL(usb_amd_pt_check_port); @@ -30,7 +30,7 @@ Signed-off-by: Felix Fietkau /* * Make sure the controller is completely inactive, unable to * generate interrupts or do DMA. -@@ -712,8 +718,17 @@ reset_needed: +@@ -710,8 +716,17 @@ reset_needed: uhci_reset_hc(pdev, base); return 1; } @@ -48,7 +48,7 @@ Signed-off-by: Felix Fietkau static inline int io_type_enabled(struct pci_dev *pdev, unsigned int mask) { u16 cmd; -@@ -1285,3 +1300,4 @@ static void quirk_usb_early_handoff(stru +@@ -1283,3 +1298,4 @@ static void quirk_usb_early_handoff(stru } DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_SERIAL_USB, 8, quirk_usb_early_handoff); @@ -98,7 +98,7 @@ Signed-off-by: Felix Fietkau #endif /* __LINUX_USB_PCI_QUIRKS_H */ --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h -@@ -483,7 +483,14 @@ extern int usb_hcd_pci_probe(struct pci_ +@@ -484,7 +484,14 @@ extern int usb_hcd_pci_probe(struct pci_ extern void usb_hcd_pci_remove(struct pci_dev *dev); extern void usb_hcd_pci_shutdown(struct pci_dev *dev); diff --git a/target/linux/generic/pending-6.1/920-mangle_bootargs.patch b/target/linux/generic/pending-6.1/920-mangle_bootargs.patch index 76e3f2544d..ca36d0ccab 100644 --- a/target/linux/generic/pending-6.1/920-mangle_bootargs.patch +++ b/target/linux/generic/pending-6.1/920-mangle_bootargs.patch @@ -61,7 +61,7 @@ Signed-off-by: Imre Kaloz /* * We need to store the untouched command line for future reference. * We also need to store the touched command line since the parameter -@@ -959,6 +982,7 @@ asmlinkage __visible void __init __no_sa +@@ -961,6 +984,7 @@ asmlinkage __visible void __init __no_sa pr_notice("%s", linux_banner); early_security_init(); setup_arch(&command_line); diff --git a/target/linux/mediatek/patches-6.1/220-v6.3-clk-mediatek-clk-gate-Propagate-struct-device-with-m.patch b/target/linux/mediatek/patches-6.1/220-v6.3-clk-mediatek-clk-gate-Propagate-struct-device-with-m.patch deleted file mode 100644 index af5715e1f5..0000000000 --- a/target/linux/mediatek/patches-6.1/220-v6.3-clk-mediatek-clk-gate-Propagate-struct-device-with-m.patch +++ /dev/null @@ -1,536 +0,0 @@ -From fe5c8d03f3de89ae058e365b783f8c1314f47490 Mon Sep 17 00:00:00 2001 -From: AngeloGioacchino Del Regno -Date: Fri, 20 Jan 2023 10:20:33 +0100 -Subject: [PATCH 01/15] clk: mediatek: clk-gate: Propagate struct device with - mtk_clk_register_gates() - -Commit e4c23e19aa2a ("clk: mediatek: Register clock gate with device") -introduces a helper function for the sole purpose of propagating a -struct device pointer to the clk API when registering the mtk-gate -clocks to take advantage of Runtime PM when/where needed and where -a power domain is defined in devicetree. - -Function mtk_clk_register_gates() then becomes a wrapper around the -new mtk_clk_register_gates_with_dev() function that will simply pass -NULL as struct device: this is essential when registering drivers -with CLK_OF_DECLARE instead of as a platform device, as there will -be no struct device to pass... but we can as well simply have only -one function that always takes such pointer as a param and pass NULL -when unavoidable. - -This commit removes the mtk_clk_register_gates() wrapper and renames -mtk_clk_register_gates_with_dev() to the former and all of the calls -to either of the two functions were fixed in all drivers in order to -reflect this change; also, to improve consistency with other kernel -functions, the pointer to struct device was moved as the first param. - -Since a lot of MediaTek clock drivers are actually registering as a -platform device, but were still registering the mtk-gate clocks -without passing any struct device to the clock framework, they've -been changed to pass a valid one now, as to make all those platforms -able to use runtime power management where available. - -While at it, some much needed indentation changes were also done. - -Signed-off-by: AngeloGioacchino Del Regno -Reviewed-by: Chen-Yu Tsai -Reviewed-by: Markus Schneider-Pargmann -Tested-by: Miles Chen -Link: https://lore.kernel.org/r/20230120092053.182923-4-angelogioacchino.delregno@collabora.com -Tested-by: Mingming Su -Signed-off-by: Stephen Boyd - -[daniel@makrotopia.org: dropped parts not relevant for OpenWrt] ---- - drivers/clk/mediatek/clk-gate.c | 23 +++++++--------------- - drivers/clk/mediatek/clk-gate.h | 7 +------ - drivers/clk/mediatek/clk-mt2701-aud.c | 4 ++-- - drivers/clk/mediatek/clk-mt2701-eth.c | 4 ++-- - drivers/clk/mediatek/clk-mt2701-g3d.c | 2 +- - drivers/clk/mediatek/clk-mt2701-hif.c | 4 ++-- - drivers/clk/mediatek/clk-mt2701-mm.c | 4 ++-- - drivers/clk/mediatek/clk-mt2701.c | 12 +++++------ - drivers/clk/mediatek/clk-mt2712-mm.c | 4 ++-- - drivers/clk/mediatek/clk-mt2712.c | 12 +++++------ - drivers/clk/mediatek/clk-mt7622-aud.c | 4 ++-- - drivers/clk/mediatek/clk-mt7622-eth.c | 8 ++++---- - drivers/clk/mediatek/clk-mt7622-hif.c | 8 ++++---- - drivers/clk/mediatek/clk-mt7622.c | 14 ++++++------- - drivers/clk/mediatek/clk-mt7629-eth.c | 7 ++++--- - drivers/clk/mediatek/clk-mt7629-hif.c | 8 ++++---- - drivers/clk/mediatek/clk-mt7629.c | 10 +++++----- - drivers/clk/mediatek/clk-mt7986-eth.c | 10 +++++----- - drivers/clk/mediatek/clk-mt7986-infracfg.c | 4 ++-- - 19 files changed, 68 insertions(+), 81 deletions(-) - ---- a/drivers/clk/mediatek/clk-gate.c -+++ b/drivers/clk/mediatek/clk-gate.c -@@ -152,12 +152,12 @@ const struct clk_ops mtk_clk_gate_ops_no - }; - EXPORT_SYMBOL_GPL(mtk_clk_gate_ops_no_setclr_inv); - --static struct clk_hw *mtk_clk_register_gate(const char *name, -+static struct clk_hw *mtk_clk_register_gate(struct device *dev, const char *name, - const char *parent_name, - struct regmap *regmap, int set_ofs, - int clr_ofs, int sta_ofs, u8 bit, - const struct clk_ops *ops, -- unsigned long flags, struct device *dev) -+ unsigned long flags) - { - struct mtk_clk_gate *cg; - int ret; -@@ -202,10 +202,9 @@ static void mtk_clk_unregister_gate(stru - kfree(cg); - } - --int mtk_clk_register_gates_with_dev(struct device_node *node, -- const struct mtk_gate *clks, int num, -- struct clk_hw_onecell_data *clk_data, -- struct device *dev) -+int mtk_clk_register_gates(struct device *dev, struct device_node *node, -+ const struct mtk_gate *clks, int num, -+ struct clk_hw_onecell_data *clk_data) - { - int i; - struct clk_hw *hw; -@@ -229,13 +228,13 @@ int mtk_clk_register_gates_with_dev(stru - continue; - } - -- hw = mtk_clk_register_gate(gate->name, gate->parent_name, -+ hw = mtk_clk_register_gate(dev, gate->name, gate->parent_name, - regmap, - gate->regs->set_ofs, - gate->regs->clr_ofs, - gate->regs->sta_ofs, - gate->shift, gate->ops, -- gate->flags, dev); -+ gate->flags); - - if (IS_ERR(hw)) { - pr_err("Failed to register clk %s: %pe\n", gate->name, -@@ -261,14 +260,6 @@ err: - - return PTR_ERR(hw); - } --EXPORT_SYMBOL_GPL(mtk_clk_register_gates_with_dev); -- --int mtk_clk_register_gates(struct device_node *node, -- const struct mtk_gate *clks, int num, -- struct clk_hw_onecell_data *clk_data) --{ -- return mtk_clk_register_gates_with_dev(node, clks, num, clk_data, NULL); --} - EXPORT_SYMBOL_GPL(mtk_clk_register_gates); - - void mtk_clk_unregister_gates(const struct mtk_gate *clks, int num, ---- a/drivers/clk/mediatek/clk-gate.h -+++ b/drivers/clk/mediatek/clk-gate.h -@@ -50,15 +50,10 @@ struct mtk_gate { - #define GATE_MTK(_id, _name, _parent, _regs, _shift, _ops) \ - GATE_MTK_FLAGS(_id, _name, _parent, _regs, _shift, _ops, 0) - --int mtk_clk_register_gates(struct device_node *node, -+int mtk_clk_register_gates(struct device *dev, struct device_node *node, - const struct mtk_gate *clks, int num, - struct clk_hw_onecell_data *clk_data); - --int mtk_clk_register_gates_with_dev(struct device_node *node, -- const struct mtk_gate *clks, int num, -- struct clk_hw_onecell_data *clk_data, -- struct device *dev); -- - void mtk_clk_unregister_gates(const struct mtk_gate *clks, int num, - struct clk_hw_onecell_data *clk_data); - ---- a/drivers/clk/mediatek/clk-mt2701-aud.c -+++ b/drivers/clk/mediatek/clk-mt2701-aud.c -@@ -127,8 +127,8 @@ static int clk_mt2701_aud_probe(struct p - - clk_data = mtk_alloc_clk_data(CLK_AUD_NR); - -- mtk_clk_register_gates(node, audio_clks, ARRAY_SIZE(audio_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, audio_clks, -+ ARRAY_SIZE(audio_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) { ---- a/drivers/clk/mediatek/clk-mt2701-eth.c -+++ b/drivers/clk/mediatek/clk-mt2701-eth.c -@@ -51,8 +51,8 @@ static int clk_mt2701_eth_probe(struct p - - clk_data = mtk_alloc_clk_data(CLK_ETHSYS_NR); - -- mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, eth_clks, -+ ARRAY_SIZE(eth_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) ---- a/drivers/clk/mediatek/clk-mt2701-g3d.c -+++ b/drivers/clk/mediatek/clk-mt2701-g3d.c -@@ -45,7 +45,7 @@ static int clk_mt2701_g3dsys_init(struct - - clk_data = mtk_alloc_clk_data(CLK_G3DSYS_NR); - -- mtk_clk_register_gates(node, g3d_clks, ARRAY_SIZE(g3d_clks), -+ mtk_clk_register_gates(&pdev->dev, node, g3d_clks, ARRAY_SIZE(g3d_clks), - clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); ---- a/drivers/clk/mediatek/clk-mt2701-hif.c -+++ b/drivers/clk/mediatek/clk-mt2701-hif.c -@@ -48,8 +48,8 @@ static int clk_mt2701_hif_probe(struct p - - clk_data = mtk_alloc_clk_data(CLK_HIFSYS_NR); - -- mtk_clk_register_gates(node, hif_clks, ARRAY_SIZE(hif_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, hif_clks, -+ ARRAY_SIZE(hif_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) { ---- a/drivers/clk/mediatek/clk-mt2701-mm.c -+++ b/drivers/clk/mediatek/clk-mt2701-mm.c -@@ -76,8 +76,8 @@ static int clk_mt2701_mm_probe(struct pl - - clk_data = mtk_alloc_clk_data(CLK_MM_NR); - -- mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, mm_clks, -+ ARRAY_SIZE(mm_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) ---- a/drivers/clk/mediatek/clk-mt2701.c -+++ b/drivers/clk/mediatek/clk-mt2701.c -@@ -685,8 +685,8 @@ static int mtk_topckgen_init(struct plat - mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs), - base, &mt2701_clk_lock, clk_data); - -- mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, top_clks, -+ ARRAY_SIZE(top_clks), clk_data); - - return of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - } -@@ -789,8 +789,8 @@ static int mtk_infrasys_init(struct plat - } - } - -- mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks), -- infra_clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, infra_clks, -+ ARRAY_SIZE(infra_clks), infra_clk_data); - mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs), - infra_clk_data); - -@@ -902,8 +902,8 @@ static int mtk_pericfg_init(struct platf - if (!clk_data) - return -ENOMEM; - -- mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, peri_clks, -+ ARRAY_SIZE(peri_clks), clk_data); - - mtk_clk_register_composites(peri_muxs, ARRAY_SIZE(peri_muxs), base, - &mt2701_clk_lock, clk_data); ---- a/drivers/clk/mediatek/clk-mt2712-mm.c -+++ b/drivers/clk/mediatek/clk-mt2712-mm.c -@@ -117,8 +117,8 @@ static int clk_mt2712_mm_probe(struct pl - - clk_data = mtk_alloc_clk_data(CLK_MM_NR_CLK); - -- mtk_clk_register_gates(node, mm_clks, ARRAY_SIZE(mm_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, mm_clks, -+ ARRAY_SIZE(mm_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - ---- a/drivers/clk/mediatek/clk-mt2712.c -+++ b/drivers/clk/mediatek/clk-mt2712.c -@@ -1324,8 +1324,8 @@ static int clk_mt2712_top_probe(struct p - &mt2712_clk_lock, top_clk_data); - mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs), base, - &mt2712_clk_lock, top_clk_data); -- mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks), -- top_clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, top_clks, -+ ARRAY_SIZE(top_clks), top_clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, top_clk_data); - -@@ -1344,8 +1344,8 @@ static int clk_mt2712_infra_probe(struct - - clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK); - -- mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, infra_clks, -+ ARRAY_SIZE(infra_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - -@@ -1366,8 +1366,8 @@ static int clk_mt2712_peri_probe(struct - - clk_data = mtk_alloc_clk_data(CLK_PERI_NR_CLK); - -- mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, peri_clks, -+ ARRAY_SIZE(peri_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - ---- a/drivers/clk/mediatek/clk-mt7622-aud.c -+++ b/drivers/clk/mediatek/clk-mt7622-aud.c -@@ -114,8 +114,8 @@ static int clk_mt7622_audiosys_init(stru - - clk_data = mtk_alloc_clk_data(CLK_AUDIO_NR_CLK); - -- mtk_clk_register_gates(node, audio_clks, ARRAY_SIZE(audio_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, audio_clks, -+ ARRAY_SIZE(audio_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) { ---- a/drivers/clk/mediatek/clk-mt7622-eth.c -+++ b/drivers/clk/mediatek/clk-mt7622-eth.c -@@ -69,8 +69,8 @@ static int clk_mt7622_ethsys_init(struct - - clk_data = mtk_alloc_clk_data(CLK_ETH_NR_CLK); - -- mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, eth_clks, -+ ARRAY_SIZE(eth_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) -@@ -91,8 +91,8 @@ static int clk_mt7622_sgmiisys_init(stru - - clk_data = mtk_alloc_clk_data(CLK_SGMII_NR_CLK); - -- mtk_clk_register_gates(node, sgmii_clks, ARRAY_SIZE(sgmii_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, sgmii_clks, -+ ARRAY_SIZE(sgmii_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) ---- a/drivers/clk/mediatek/clk-mt7622-hif.c -+++ b/drivers/clk/mediatek/clk-mt7622-hif.c -@@ -80,8 +80,8 @@ static int clk_mt7622_ssusbsys_init(stru - - clk_data = mtk_alloc_clk_data(CLK_SSUSB_NR_CLK); - -- mtk_clk_register_gates(node, ssusb_clks, ARRAY_SIZE(ssusb_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, ssusb_clks, -+ ARRAY_SIZE(ssusb_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) -@@ -102,8 +102,8 @@ static int clk_mt7622_pciesys_init(struc - - clk_data = mtk_alloc_clk_data(CLK_PCIE_NR_CLK); - -- mtk_clk_register_gates(node, pcie_clks, ARRAY_SIZE(pcie_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, pcie_clks, -+ ARRAY_SIZE(pcie_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) ---- a/drivers/clk/mediatek/clk-mt7622.c -+++ b/drivers/clk/mediatek/clk-mt7622.c -@@ -621,8 +621,8 @@ static int mtk_topckgen_init(struct plat - mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs), - base, &mt7622_clk_lock, clk_data); - -- mtk_clk_register_gates(node, top_clks, ARRAY_SIZE(top_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, top_clks, -+ ARRAY_SIZE(top_clks), clk_data); - - return of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - } -@@ -635,8 +635,8 @@ static int mtk_infrasys_init(struct plat - - clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK); - -- mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, infra_clks, -+ ARRAY_SIZE(infra_clks), clk_data); - - mtk_clk_register_cpumuxes(node, infra_muxes, ARRAY_SIZE(infra_muxes), - clk_data); -@@ -663,7 +663,7 @@ static int mtk_apmixedsys_init(struct pl - mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), - clk_data); - -- mtk_clk_register_gates(node, apmixed_clks, -+ mtk_clk_register_gates(&pdev->dev, node, apmixed_clks, - ARRAY_SIZE(apmixed_clks), clk_data); - - return of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); -@@ -682,8 +682,8 @@ static int mtk_pericfg_init(struct platf - - clk_data = mtk_alloc_clk_data(CLK_PERI_NR_CLK); - -- mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, peri_clks, -+ ARRAY_SIZE(peri_clks), clk_data); - - mtk_clk_register_composites(peri_muxes, ARRAY_SIZE(peri_muxes), base, - &mt7622_clk_lock, clk_data); ---- a/drivers/clk/mediatek/clk-mt7629-eth.c -+++ b/drivers/clk/mediatek/clk-mt7629-eth.c -@@ -82,7 +82,8 @@ static int clk_mt7629_ethsys_init(struct - if (!clk_data) - return -ENOMEM; - -- mtk_clk_register_gates(node, eth_clks, CLK_ETH_NR_CLK, clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, eth_clks, -+ CLK_ETH_NR_CLK, clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) -@@ -106,8 +107,8 @@ static int clk_mt7629_sgmiisys_init(stru - if (!clk_data) - return -ENOMEM; - -- mtk_clk_register_gates(node, sgmii_clks[id++], CLK_SGMII_NR_CLK, -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, sgmii_clks[id++], -+ CLK_SGMII_NR_CLK, clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) ---- a/drivers/clk/mediatek/clk-mt7629-hif.c -+++ b/drivers/clk/mediatek/clk-mt7629-hif.c -@@ -75,8 +75,8 @@ static int clk_mt7629_ssusbsys_init(stru - - clk_data = mtk_alloc_clk_data(CLK_SSUSB_NR_CLK); - -- mtk_clk_register_gates(node, ssusb_clks, ARRAY_SIZE(ssusb_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, ssusb_clks, -+ ARRAY_SIZE(ssusb_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) -@@ -97,8 +97,8 @@ static int clk_mt7629_pciesys_init(struc - - clk_data = mtk_alloc_clk_data(CLK_PCIE_NR_CLK); - -- mtk_clk_register_gates(node, pcie_clks, ARRAY_SIZE(pcie_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, pcie_clks, -+ ARRAY_SIZE(pcie_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) ---- a/drivers/clk/mediatek/clk-mt7629.c -+++ b/drivers/clk/mediatek/clk-mt7629.c -@@ -585,8 +585,8 @@ static int mtk_infrasys_init(struct plat - if (!clk_data) - return -ENOMEM; - -- mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, infra_clks, -+ ARRAY_SIZE(infra_clks), clk_data); - - mtk_clk_register_cpumuxes(node, infra_muxes, ARRAY_SIZE(infra_muxes), - clk_data); -@@ -610,8 +610,8 @@ static int mtk_pericfg_init(struct platf - if (!clk_data) - return -ENOMEM; - -- mtk_clk_register_gates(node, peri_clks, ARRAY_SIZE(peri_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, peri_clks, -+ ARRAY_SIZE(peri_clks), clk_data); - - mtk_clk_register_composites(peri_muxes, ARRAY_SIZE(peri_muxes), base, - &mt7629_clk_lock, clk_data); -@@ -637,7 +637,7 @@ static int mtk_apmixedsys_init(struct pl - mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), - clk_data); - -- mtk_clk_register_gates(node, apmixed_clks, -+ mtk_clk_register_gates(&pdev->dev, node, apmixed_clks, - ARRAY_SIZE(apmixed_clks), clk_data); - - clk_prepare_enable(clk_data->hws[CLK_APMIXED_ARMPLL]->clk); ---- a/drivers/clk/mediatek/clk-mt7986-eth.c -+++ b/drivers/clk/mediatek/clk-mt7986-eth.c -@@ -72,8 +72,8 @@ static void __init mtk_sgmiisys_0_init(s - - clk_data = mtk_alloc_clk_data(ARRAY_SIZE(sgmii0_clks)); - -- mtk_clk_register_gates(node, sgmii0_clks, ARRAY_SIZE(sgmii0_clks), -- clk_data); -+ mtk_clk_register_gates(NULL, node, sgmii0_clks, -+ ARRAY_SIZE(sgmii0_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) -@@ -90,8 +90,8 @@ static void __init mtk_sgmiisys_1_init(s - - clk_data = mtk_alloc_clk_data(ARRAY_SIZE(sgmii1_clks)); - -- mtk_clk_register_gates(node, sgmii1_clks, ARRAY_SIZE(sgmii1_clks), -- clk_data); -+ mtk_clk_register_gates(NULL, node, sgmii1_clks, -+ ARRAY_SIZE(sgmii1_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - -@@ -109,7 +109,7 @@ static void __init mtk_ethsys_init(struc - - clk_data = mtk_alloc_clk_data(ARRAY_SIZE(eth_clks)); - -- mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks), clk_data); -+ mtk_clk_register_gates(NULL, node, eth_clks, ARRAY_SIZE(eth_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - ---- a/drivers/clk/mediatek/clk-mt7986-infracfg.c -+++ b/drivers/clk/mediatek/clk-mt7986-infracfg.c -@@ -180,8 +180,8 @@ static int clk_mt7986_infracfg_probe(str - mtk_clk_register_factors(infra_divs, ARRAY_SIZE(infra_divs), clk_data); - mtk_clk_register_muxes(infra_muxes, ARRAY_SIZE(infra_muxes), node, - &mt7986_clk_lock, clk_data); -- mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks), -- clk_data); -+ mtk_clk_register_gates(&pdev->dev, node, infra_clks, -+ ARRAY_SIZE(infra_clks), clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) { ---- a/drivers/clk/mediatek/clk-mtk.c -+++ b/drivers/clk/mediatek/clk-mtk.c -@@ -459,8 +459,8 @@ int mtk_clk_simple_probe(struct platform - if (!clk_data) - return -ENOMEM; - -- r = mtk_clk_register_gates_with_dev(node, mcd->clks, mcd->num_clks, -- clk_data, &pdev->dev); -+ r = mtk_clk_register_gates(&pdev->dev, node, mcd->clks, mcd->num_clks, -+ clk_data); - if (r) - goto free_data; - diff --git a/target/linux/mediatek/patches-6.1/221-v6.3-clk-mediatek-cpumux-Propagate-struct-device-where-po.patch b/target/linux/mediatek/patches-6.1/221-v6.3-clk-mediatek-cpumux-Propagate-struct-device-where-po.patch index 223155c59b..c7f37718af 100644 --- a/target/linux/mediatek/patches-6.1/221-v6.3-clk-mediatek-cpumux-Propagate-struct-device-where-po.patch +++ b/target/linux/mediatek/patches-6.1/221-v6.3-clk-mediatek-cpumux-Propagate-struct-device-where-po.patch @@ -78,7 +78,7 @@ Signed-off-by: Stephen Boyd --- a/drivers/clk/mediatek/clk-mt2701.c +++ b/drivers/clk/mediatek/clk-mt2701.c -@@ -761,7 +761,7 @@ static void __init mtk_infrasys_init_ear +@@ -762,7 +762,7 @@ static void __init mtk_infrasys_init_ear mtk_clk_register_factors(infra_fixed_divs, ARRAY_SIZE(infra_fixed_divs), infra_clk_data); @@ -89,7 +89,7 @@ Signed-off-by: Stephen Boyd r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, --- a/drivers/clk/mediatek/clk-mt6795-infracfg.c +++ b/drivers/clk/mediatek/clk-mt6795-infracfg.c -@@ -105,7 +105,8 @@ static int clk_mt6795_infracfg_probe(str +@@ -106,7 +106,8 @@ static int clk_mt6795_infracfg_probe(str if (ret) goto free_clk_data; @@ -101,7 +101,7 @@ Signed-off-by: Stephen Boyd --- a/drivers/clk/mediatek/clk-mt7622.c +++ b/drivers/clk/mediatek/clk-mt7622.c -@@ -638,8 +638,8 @@ static int mtk_infrasys_init(struct plat +@@ -639,8 +639,8 @@ static int mtk_infrasys_init(struct plat mtk_clk_register_gates(&pdev->dev, node, infra_clks, ARRAY_SIZE(infra_clks), clk_data); @@ -114,7 +114,7 @@ Signed-off-by: Stephen Boyd clk_data); --- a/drivers/clk/mediatek/clk-mt7629.c +++ b/drivers/clk/mediatek/clk-mt7629.c -@@ -588,8 +588,8 @@ static int mtk_infrasys_init(struct plat +@@ -589,8 +589,8 @@ static int mtk_infrasys_init(struct plat mtk_clk_register_gates(&pdev->dev, node, infra_clks, ARRAY_SIZE(infra_clks), clk_data); @@ -127,8 +127,8 @@ Signed-off-by: Stephen Boyd clk_data); --- a/drivers/clk/mediatek/clk-mt8173.c +++ b/drivers/clk/mediatek/clk-mt8173.c -@@ -892,8 +892,8 @@ static void __init mtk_infrasys_init(str - clk_data); +@@ -893,8 +893,8 @@ static void __init mtk_infrasys_init(str + ARRAY_SIZE(infra_clks), clk_data); mtk_clk_register_factors(infra_divs, ARRAY_SIZE(infra_divs), clk_data); - mtk_clk_register_cpumuxes(node, cpu_muxes, ARRAY_SIZE(cpu_muxes), diff --git a/target/linux/mediatek/patches-6.1/222-v6.3-clk-mediatek-clk-mtk-Propagate-struct-device-for-com.patch b/target/linux/mediatek/patches-6.1/222-v6.3-clk-mediatek-clk-mtk-Propagate-struct-device-for-com.patch deleted file mode 100644 index eca1b614cd..0000000000 --- a/target/linux/mediatek/patches-6.1/222-v6.3-clk-mediatek-clk-mtk-Propagate-struct-device-for-com.patch +++ /dev/null @@ -1,181 +0,0 @@ -From f23375db001ec0fe9f565be75eff43adde15407e Mon Sep 17 00:00:00 2001 -From: AngeloGioacchino Del Regno -Date: Fri, 20 Jan 2023 10:20:35 +0100 -Subject: [PATCH 03/15] clk: mediatek: clk-mtk: Propagate struct device for - composites - -Like done for cpumux clocks, propagate struct device for composite -clocks registered through clk-mtk helpers to be able to get runtime -pm support for MTK clocks. - -Signed-off-by: AngeloGioacchino Del Regno -Tested-by: Miles Chen -Link: https://lore.kernel.org/r/20230120092053.182923-6-angelogioacchino.delregno@collabora.com -Tested-by: Mingming Su -Signed-off-by: Stephen Boyd - -[daniel@makrotopia.org: remove parts not relevant for OpenWrt] ---- - drivers/clk/mediatek/clk-mt2701.c | 10 ++++++---- - drivers/clk/mediatek/clk-mt2712.c | 12 ++++++++---- - drivers/clk/mediatek/clk-mt7622.c | 8 +++++--- - drivers/clk/mediatek/clk-mt7629.c | 8 +++++--- - drivers/clk/mediatek/clk-mtk.c | 11 ++++++----- - drivers/clk/mediatek/clk-mtk.h | 3 ++- - 6 files changed, 32 insertions(+), 20 deletions(-) - ---- a/drivers/clk/mediatek/clk-mt2701.c -+++ b/drivers/clk/mediatek/clk-mt2701.c -@@ -679,8 +679,9 @@ static int mtk_topckgen_init(struct plat - mtk_clk_register_factors(top_fixed_divs, ARRAY_SIZE(top_fixed_divs), - clk_data); - -- mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), -- base, &mt2701_clk_lock, clk_data); -+ mtk_clk_register_composites(&pdev->dev, top_muxes, -+ ARRAY_SIZE(top_muxes), base, -+ &mt2701_clk_lock, clk_data); - - mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs), - base, &mt2701_clk_lock, clk_data); -@@ -905,8 +906,9 @@ static int mtk_pericfg_init(struct platf - mtk_clk_register_gates(&pdev->dev, node, peri_clks, - ARRAY_SIZE(peri_clks), clk_data); - -- mtk_clk_register_composites(peri_muxs, ARRAY_SIZE(peri_muxs), base, -- &mt2701_clk_lock, clk_data); -+ mtk_clk_register_composites(&pdev->dev, peri_muxs, -+ ARRAY_SIZE(peri_muxs), base, -+ &mt2701_clk_lock, clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) ---- a/drivers/clk/mediatek/clk-mt2712.c -+++ b/drivers/clk/mediatek/clk-mt2712.c -@@ -1320,8 +1320,9 @@ static int clk_mt2712_top_probe(struct p - mtk_clk_register_factors(top_early_divs, ARRAY_SIZE(top_early_divs), - top_clk_data); - mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), top_clk_data); -- mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), base, -- &mt2712_clk_lock, top_clk_data); -+ mtk_clk_register_composites(&pdev->dev, top_muxes, -+ ARRAY_SIZE(top_muxes), base, -+ &mt2712_clk_lock, top_clk_data); - mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs), base, - &mt2712_clk_lock, top_clk_data); - mtk_clk_register_gates(&pdev->dev, node, top_clks, -@@ -1395,8 +1396,11 @@ static int clk_mt2712_mcu_probe(struct p - - clk_data = mtk_alloc_clk_data(CLK_MCU_NR_CLK); - -- mtk_clk_register_composites(mcu_muxes, ARRAY_SIZE(mcu_muxes), base, -- &mt2712_clk_lock, clk_data); -+ r = mtk_clk_register_composites(&pdev->dev, mcu_muxes, -+ ARRAY_SIZE(mcu_muxes), base, -+ &mt2712_clk_lock, clk_data); -+ if (r) -+ dev_err(&pdev->dev, "Could not register composites: %d\n", r); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - ---- a/drivers/clk/mediatek/clk-mt7622.c -+++ b/drivers/clk/mediatek/clk-mt7622.c -@@ -615,8 +615,9 @@ static int mtk_topckgen_init(struct plat - mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), - clk_data); - -- mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), -- base, &mt7622_clk_lock, clk_data); -+ mtk_clk_register_composites(&pdev->dev, top_muxes, -+ ARRAY_SIZE(top_muxes), base, -+ &mt7622_clk_lock, clk_data); - - mtk_clk_register_dividers(top_adj_divs, ARRAY_SIZE(top_adj_divs), - base, &mt7622_clk_lock, clk_data); -@@ -685,7 +686,8 @@ static int mtk_pericfg_init(struct platf - mtk_clk_register_gates(&pdev->dev, node, peri_clks, - ARRAY_SIZE(peri_clks), clk_data); - -- mtk_clk_register_composites(peri_muxes, ARRAY_SIZE(peri_muxes), base, -+ mtk_clk_register_composites(&pdev->dev, peri_muxes, -+ ARRAY_SIZE(peri_muxes), base, - &mt7622_clk_lock, clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); ---- a/drivers/clk/mediatek/clk-mt7629.c -+++ b/drivers/clk/mediatek/clk-mt7629.c -@@ -566,8 +566,9 @@ static int mtk_topckgen_init(struct plat - mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), - clk_data); - -- mtk_clk_register_composites(top_muxes, ARRAY_SIZE(top_muxes), -- base, &mt7629_clk_lock, clk_data); -+ mtk_clk_register_composites(&pdev->dev, top_muxes, -+ ARRAY_SIZE(top_muxes), base, -+ &mt7629_clk_lock, clk_data); - - clk_prepare_enable(clk_data->hws[CLK_TOP_AXI_SEL]->clk); - clk_prepare_enable(clk_data->hws[CLK_TOP_MEM_SEL]->clk); -@@ -613,7 +614,8 @@ static int mtk_pericfg_init(struct platf - mtk_clk_register_gates(&pdev->dev, node, peri_clks, - ARRAY_SIZE(peri_clks), clk_data); - -- mtk_clk_register_composites(peri_muxes, ARRAY_SIZE(peri_muxes), base, -+ mtk_clk_register_composites(&pdev->dev, peri_muxes, -+ ARRAY_SIZE(peri_muxes), base, - &mt7629_clk_lock, clk_data); - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); ---- a/drivers/clk/mediatek/clk-mtk.c -+++ b/drivers/clk/mediatek/clk-mtk.c -@@ -197,8 +197,8 @@ void mtk_clk_unregister_factors(const st - } - EXPORT_SYMBOL_GPL(mtk_clk_unregister_factors); - --static struct clk_hw *mtk_clk_register_composite(const struct mtk_composite *mc, -- void __iomem *base, spinlock_t *lock) -+static struct clk_hw *mtk_clk_register_composite(struct device *dev, -+ const struct mtk_composite *mc, void __iomem *base, spinlock_t *lock) - { - struct clk_hw *hw; - struct clk_mux *mux = NULL; -@@ -264,7 +264,7 @@ static struct clk_hw *mtk_clk_register_c - div_ops = &clk_divider_ops; - } - -- hw = clk_hw_register_composite(NULL, mc->name, parent_names, num_parents, -+ hw = clk_hw_register_composite(dev, mc->name, parent_names, num_parents, - mux_hw, mux_ops, - div_hw, div_ops, - gate_hw, gate_ops, -@@ -308,7 +308,8 @@ static void mtk_clk_unregister_composite - kfree(mux); - } - --int mtk_clk_register_composites(const struct mtk_composite *mcs, int num, -+int mtk_clk_register_composites(struct device *dev, -+ const struct mtk_composite *mcs, int num, - void __iomem *base, spinlock_t *lock, - struct clk_hw_onecell_data *clk_data) - { -@@ -327,7 +328,7 @@ int mtk_clk_register_composites(const st - continue; - } - -- hw = mtk_clk_register_composite(mc, base, lock); -+ hw = mtk_clk_register_composite(dev, mc, base, lock); - - if (IS_ERR(hw)) { - pr_err("Failed to register clk %s: %pe\n", mc->name, ---- a/drivers/clk/mediatek/clk-mtk.h -+++ b/drivers/clk/mediatek/clk-mtk.h -@@ -149,7 +149,8 @@ struct mtk_composite { - .flags = 0, \ - } - --int mtk_clk_register_composites(const struct mtk_composite *mcs, int num, -+int mtk_clk_register_composites(struct device *dev, -+ const struct mtk_composite *mcs, int num, - void __iomem *base, spinlock_t *lock, - struct clk_hw_onecell_data *clk_data); - void mtk_clk_unregister_composites(const struct mtk_composite *mcs, int num, diff --git a/target/linux/mediatek/patches-6.1/223-v6.3-clk-mediatek-clk-mux-Propagate-struct-device-for-mtk.patch b/target/linux/mediatek/patches-6.1/223-v6.3-clk-mediatek-clk-mux-Propagate-struct-device-for-mtk.patch deleted file mode 100644 index a50422da58..0000000000 --- a/target/linux/mediatek/patches-6.1/223-v6.3-clk-mediatek-clk-mux-Propagate-struct-device-for-mtk.patch +++ /dev/null @@ -1,103 +0,0 @@ -From 5d911479e4c732729bfa798e4a9e3e5aec3e30a7 Mon Sep 17 00:00:00 2001 -From: AngeloGioacchino Del Regno -Date: Fri, 20 Jan 2023 10:20:36 +0100 -Subject: [PATCH 04/15] clk: mediatek: clk-mux: Propagate struct device for - mtk-mux - -Like done for other clocks, propagate struct device for mtk mux clocks -registered through clk-mux helpers to enable runtime pm support. - -Signed-off-by: AngeloGioacchino Del Regno -Tested-by: Miles Chen -Link: https://lore.kernel.org/r/20230120092053.182923-7-angelogioacchino.delregno@collabora.com -Tested-by: Mingming Su -Signed-off-by: Stephen Boyd - -[daniel@makrotopia.org: removed parts not relevant for OpenWrt] ---- - drivers/clk/mediatek/clk-mt7986-infracfg.c | 3 ++- - drivers/clk/mediatek/clk-mt7986-topckgen.c | 3 ++- - drivers/clk/mediatek/clk-mux.c | 14 ++++++++------ - drivers/clk/mediatek/clk-mux.h | 3 ++- - 4 files changed, 14 insertions(+), 9 deletions(-) - ---- a/drivers/clk/mediatek/clk-mt7986-infracfg.c -+++ b/drivers/clk/mediatek/clk-mt7986-infracfg.c -@@ -178,7 +178,8 @@ static int clk_mt7986_infracfg_probe(str - return -ENOMEM; - - mtk_clk_register_factors(infra_divs, ARRAY_SIZE(infra_divs), clk_data); -- mtk_clk_register_muxes(infra_muxes, ARRAY_SIZE(infra_muxes), node, -+ mtk_clk_register_muxes(&pdev->dev, infra_muxes, -+ ARRAY_SIZE(infra_muxes), node, - &mt7986_clk_lock, clk_data); - mtk_clk_register_gates(&pdev->dev, node, infra_clks, - ARRAY_SIZE(infra_clks), clk_data); ---- a/drivers/clk/mediatek/clk-mt7986-topckgen.c -+++ b/drivers/clk/mediatek/clk-mt7986-topckgen.c -@@ -303,7 +303,8 @@ static int clk_mt7986_topckgen_probe(str - mtk_clk_register_fixed_clks(top_fixed_clks, ARRAY_SIZE(top_fixed_clks), - clk_data); - mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data); -- mtk_clk_register_muxes(top_muxes, ARRAY_SIZE(top_muxes), node, -+ mtk_clk_register_muxes(&pdev->dev, top_muxes, -+ ARRAY_SIZE(top_muxes), node, - &mt7986_clk_lock, clk_data); - - clk_prepare_enable(clk_data->hws[CLK_TOP_SYSAXI_SEL]->clk); ---- a/drivers/clk/mediatek/clk-mux.c -+++ b/drivers/clk/mediatek/clk-mux.c -@@ -154,9 +154,10 @@ const struct clk_ops mtk_mux_gate_clr_se - }; - EXPORT_SYMBOL_GPL(mtk_mux_gate_clr_set_upd_ops); - --static struct clk_hw *mtk_clk_register_mux(const struct mtk_mux *mux, -- struct regmap *regmap, -- spinlock_t *lock) -+static struct clk_hw *mtk_clk_register_mux(struct device *dev, -+ const struct mtk_mux *mux, -+ struct regmap *regmap, -+ spinlock_t *lock) - { - struct mtk_clk_mux *clk_mux; - struct clk_init_data init = {}; -@@ -177,7 +178,7 @@ static struct clk_hw *mtk_clk_register_m - clk_mux->lock = lock; - clk_mux->hw.init = &init; - -- ret = clk_hw_register(NULL, &clk_mux->hw); -+ ret = clk_hw_register(dev, &clk_mux->hw); - if (ret) { - kfree(clk_mux); - return ERR_PTR(ret); -@@ -198,7 +199,8 @@ static void mtk_clk_unregister_mux(struc - kfree(mux); - } - --int mtk_clk_register_muxes(const struct mtk_mux *muxes, -+int mtk_clk_register_muxes(struct device *dev, -+ const struct mtk_mux *muxes, - int num, struct device_node *node, - spinlock_t *lock, - struct clk_hw_onecell_data *clk_data) -@@ -222,7 +224,7 @@ int mtk_clk_register_muxes(const struct - continue; - } - -- hw = mtk_clk_register_mux(mux, regmap, lock); -+ hw = mtk_clk_register_mux(dev, mux, regmap, lock); - - if (IS_ERR(hw)) { - pr_err("Failed to register clk %s: %pe\n", mux->name, ---- a/drivers/clk/mediatek/clk-mux.h -+++ b/drivers/clk/mediatek/clk-mux.h -@@ -83,7 +83,8 @@ extern const struct clk_ops mtk_mux_gate - 0, _upd_ofs, _upd, CLK_SET_RATE_PARENT, \ - mtk_mux_clr_set_upd_ops) - --int mtk_clk_register_muxes(const struct mtk_mux *muxes, -+int mtk_clk_register_muxes(struct device *dev, -+ const struct mtk_mux *muxes, - int num, struct device_node *node, - spinlock_t *lock, - struct clk_hw_onecell_data *clk_data); diff --git a/target/linux/mediatek/patches-6.1/224-v6.3-clk-mediatek-clk-mtk-Add-dummy-clock-ops.patch b/target/linux/mediatek/patches-6.1/224-v6.3-clk-mediatek-clk-mtk-Add-dummy-clock-ops.patch index de2e6976c3..c7de44fcf3 100644 --- a/target/linux/mediatek/patches-6.1/224-v6.3-clk-mediatek-clk-mtk-Add-dummy-clock-ops.patch +++ b/target/linux/mediatek/patches-6.1/224-v6.3-clk-mediatek-clk-mtk-Add-dummy-clock-ops.patch @@ -21,9 +21,9 @@ Signed-off-by: Stephen Boyd --- a/drivers/clk/mediatek/clk-mtk.c +++ b/drivers/clk/mediatek/clk-mtk.c -@@ -18,6 +18,22 @@ - #include "clk-mtk.h" +@@ -21,6 +21,22 @@ #include "clk-gate.h" + #include "clk-mux.h" +const struct mtk_gate_regs cg_regs_dummy = { 0, 0, 0 }; +EXPORT_SYMBOL_GPL(cg_regs_dummy); diff --git a/target/linux/mediatek/patches-6.1/226-v6.3-clk-mediatek-clk-mtk-Extend-mtk_clk_simple_probe.patch b/target/linux/mediatek/patches-6.1/226-v6.3-clk-mediatek-clk-mtk-Extend-mtk_clk_simple_probe.patch deleted file mode 100644 index ad02df10b6..0000000000 --- a/target/linux/mediatek/patches-6.1/226-v6.3-clk-mediatek-clk-mtk-Extend-mtk_clk_simple_probe.patch +++ /dev/null @@ -1,189 +0,0 @@ -From 7b6183108c8ccf0dc295f39cdf78bd8078455636 Mon Sep 17 00:00:00 2001 -From: AngeloGioacchino Del Regno -Date: Fri, 20 Jan 2023 10:20:42 +0100 -Subject: [PATCH] clk: mediatek: clk-mtk: Extend mtk_clk_simple_probe() - -As a preparation to increase probe functions commonization across -various MediaTek SoC clock controller drivers, extend function -mtk_clk_simple_probe() to be able to register not only gates, but -also fixed clocks, factors, muxes and composites. - -Signed-off-by: AngeloGioacchino Del Regno -Reviewed-by: Miles Chen -Reviewed-by: Chen-Yu Tsai -Tested-by: Miles Chen -Link: https://lore.kernel.org/r/20230120092053.182923-13-angelogioacchino.delregno@collabora.com -Tested-by: Mingming Su -Signed-off-by: Stephen Boyd ---- - drivers/clk/mediatek/clk-mtk.c | 101 ++++++++++++++++++++++++++++++--- - drivers/clk/mediatek/clk-mtk.h | 10 ++++ - 2 files changed, 103 insertions(+), 8 deletions(-) - ---- a/drivers/clk/mediatek/clk-mtk.c -+++ b/drivers/clk/mediatek/clk-mtk.c -@@ -11,12 +11,14 @@ - #include - #include - #include -+#include - #include - #include - #include - - #include "clk-mtk.h" - #include "clk-gate.h" -+#include "clk-mux.h" - - const struct mtk_gate_regs cg_regs_dummy = { 0, 0, 0 }; - EXPORT_SYMBOL_GPL(cg_regs_dummy); -@@ -466,20 +468,71 @@ int mtk_clk_simple_probe(struct platform - const struct mtk_clk_desc *mcd; - struct clk_hw_onecell_data *clk_data; - struct device_node *node = pdev->dev.of_node; -- int r; -+ void __iomem *base; -+ int num_clks, r; - - mcd = of_device_get_match_data(&pdev->dev); - if (!mcd) - return -EINVAL; - -- clk_data = mtk_alloc_clk_data(mcd->num_clks); -+ /* Composite clocks needs us to pass iomem pointer */ -+ if (mcd->composite_clks) { -+ if (!mcd->shared_io) -+ base = devm_platform_ioremap_resource(pdev, 0); -+ else -+ base = of_iomap(node, 0); -+ -+ if (IS_ERR_OR_NULL(base)) -+ return IS_ERR(base) ? PTR_ERR(base) : -ENOMEM; -+ } -+ -+ /* Calculate how many clk_hw_onecell_data entries to allocate */ -+ num_clks = mcd->num_clks + mcd->num_composite_clks; -+ num_clks += mcd->num_fixed_clks + mcd->num_factor_clks; -+ num_clks += mcd->num_mux_clks; -+ -+ clk_data = mtk_alloc_clk_data(num_clks); - if (!clk_data) - return -ENOMEM; - -- r = mtk_clk_register_gates(&pdev->dev, node, mcd->clks, mcd->num_clks, -- clk_data); -- if (r) -- goto free_data; -+ if (mcd->fixed_clks) { -+ r = mtk_clk_register_fixed_clks(mcd->fixed_clks, -+ mcd->num_fixed_clks, clk_data); -+ if (r) -+ goto free_data; -+ } -+ -+ if (mcd->factor_clks) { -+ r = mtk_clk_register_factors(mcd->factor_clks, -+ mcd->num_factor_clks, clk_data); -+ if (r) -+ goto unregister_fixed_clks; -+ } -+ -+ if (mcd->mux_clks) { -+ r = mtk_clk_register_muxes(&pdev->dev, mcd->mux_clks, -+ mcd->num_mux_clks, node, -+ mcd->clk_lock, clk_data); -+ if (r) -+ goto unregister_factors; -+ }; -+ -+ if (mcd->composite_clks) { -+ /* We don't check composite_lock because it's optional */ -+ r = mtk_clk_register_composites(&pdev->dev, -+ mcd->composite_clks, -+ mcd->num_composite_clks, -+ base, mcd->clk_lock, clk_data); -+ if (r) -+ goto unregister_muxes; -+ } -+ -+ if (mcd->clks) { -+ r = mtk_clk_register_gates(&pdev->dev, node, mcd->clks, -+ mcd->num_clks, clk_data); -+ if (r) -+ goto unregister_composites; -+ } - - r = of_clk_add_hw_provider(node, of_clk_hw_onecell_get, clk_data); - if (r) -@@ -497,9 +550,28 @@ int mtk_clk_simple_probe(struct platform - return r; - - unregister_clks: -- mtk_clk_unregister_gates(mcd->clks, mcd->num_clks, clk_data); -+ if (mcd->clks) -+ mtk_clk_unregister_gates(mcd->clks, mcd->num_clks, clk_data); -+unregister_composites: -+ if (mcd->composite_clks) -+ mtk_clk_unregister_composites(mcd->composite_clks, -+ mcd->num_composite_clks, clk_data); -+unregister_muxes: -+ if (mcd->mux_clks) -+ mtk_clk_unregister_muxes(mcd->mux_clks, -+ mcd->num_mux_clks, clk_data); -+unregister_factors: -+ if (mcd->factor_clks) -+ mtk_clk_unregister_factors(mcd->factor_clks, -+ mcd->num_factor_clks, clk_data); -+unregister_fixed_clks: -+ if (mcd->fixed_clks) -+ mtk_clk_unregister_fixed_clks(mcd->fixed_clks, -+ mcd->num_fixed_clks, clk_data); - free_data: - mtk_free_clk_data(clk_data); -+ if (mcd->shared_io && base) -+ iounmap(base); - return r; - } - EXPORT_SYMBOL_GPL(mtk_clk_simple_probe); -@@ -511,7 +583,20 @@ int mtk_clk_simple_remove(struct platfor - struct device_node *node = pdev->dev.of_node; - - of_clk_del_provider(node); -- mtk_clk_unregister_gates(mcd->clks, mcd->num_clks, clk_data); -+ if (mcd->clks) -+ mtk_clk_unregister_gates(mcd->clks, mcd->num_clks, clk_data); -+ if (mcd->composite_clks) -+ mtk_clk_unregister_composites(mcd->composite_clks, -+ mcd->num_composite_clks, clk_data); -+ if (mcd->mux_clks) -+ mtk_clk_unregister_muxes(mcd->mux_clks, -+ mcd->num_mux_clks, clk_data); -+ if (mcd->factor_clks) -+ mtk_clk_unregister_factors(mcd->factor_clks, -+ mcd->num_factor_clks, clk_data); -+ if (mcd->fixed_clks) -+ mtk_clk_unregister_fixed_clks(mcd->fixed_clks, -+ mcd->num_fixed_clks, clk_data); - mtk_free_clk_data(clk_data); - - return 0; ---- a/drivers/clk/mediatek/clk-mtk.h -+++ b/drivers/clk/mediatek/clk-mtk.h -@@ -215,7 +215,17 @@ void mtk_clk_unregister_ref2usb_tx(struc - struct mtk_clk_desc { - const struct mtk_gate *clks; - size_t num_clks; -+ const struct mtk_composite *composite_clks; -+ size_t num_composite_clks; -+ const struct mtk_fixed_clk *fixed_clks; -+ size_t num_fixed_clks; -+ const struct mtk_fixed_factor *factor_clks; -+ size_t num_factor_clks; -+ const struct mtk_mux *mux_clks; -+ size_t num_mux_clks; - const struct mtk_clk_rst_desc *rst_desc; -+ spinlock_t *clk_lock; -+ bool shared_io; - }; - - int mtk_clk_simple_probe(struct platform_device *pdev); diff --git a/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch index 7ab735af4c..ec6cef800a 100644 --- a/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch +++ b/target/linux/mvebu/patches-6.1/300-mvebu-Mangle-bootloader-s-kernel-arguments.patch @@ -258,7 +258,7 @@ Signed-off-by: Michael Gray static int kernel_init(void *); extern void init_IRQ(void); -@@ -994,6 +998,18 @@ asmlinkage __visible void __init __no_sa +@@ -996,6 +1000,18 @@ asmlinkage __visible void __init __no_sa page_alloc_init(); pr_notice("Kernel command line: %s\n", saved_command_line); diff --git a/target/linux/x86/config-6.1 b/target/linux/x86/config-6.1 index 20feecafd0..6c9f30cf91 100644 --- a/target/linux/x86/config-6.1 +++ b/target/linux/x86/config-6.1 @@ -236,6 +236,7 @@ CONFIG_MICROCODE_INTEL=y CONFIG_MICROCODE_LATE_LOADING=y CONFIG_MIGRATION=y CONFIG_MITIGATION_RFDS=y +CONFIG_MITIGATION_SPECTRE_BHI=y # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set @@ -351,9 +352,6 @@ CONFIG_SG_POOL=y CONFIG_SOFTIRQ_ON_OWN_STACK=y CONFIG_SPARSEMEM_STATIC=y CONFIG_SPARSE_IRQ=y -# CONFIG_SPECTRE_BHI_AUTO is not set -# CONFIG_SPECTRE_BHI_OFF is not set -CONFIG_SPECTRE_BHI_ON=y CONFIG_SPECULATION_MITIGATIONS=y CONFIG_SRCU=y # CONFIG_STATIC_CALL_SELFTEST is not set