From: Christian Lamparter <chunkeey@gmail.com>
Date: Thu, 5 Dec 2019 00:24:55 +0000 (+0100)
Subject: ipq806x: add missing gpio and gsbi declaration
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9e7a8beb9c0ed3105f86465bc64dfc79bae34d1f;p=openwrt%2Fstaging%2Fxback.git

ipq806x: add missing gpio and gsbi declaration

Adds missing gpio and gsbi declaration.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi
index a7a9c49fc5..efaa6abd78 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -656,6 +656,34 @@
 					output-low;
 				};
 			};
+
+			spi_pins: spi_pins {
+				mux {
+					pins = "gpio18", "gpio19", "gpio21";
+					function = "gsbi5";
+					drive-strength = <10>;
+					bias-none;
+				};
+			};
+
+			leds_pins: leds_pins {
+				mux {
+					pins = "gpio7", "gpio8", "gpio9",
+					       "gpio26", "gpio53";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+					output-low;
+				};
+			};
+
+			buttons_pins: buttons_pins {
+				mux {
+					pins = "gpio54";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
 		};
 
 		intc: interrupt-controller@2000000 {
@@ -852,6 +880,29 @@
 			};
 		};
 
+		gsbi7: gsbi@16600000 {
+			status = "disabled";
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <7>;
+			reg = <0x16600000 0x100>;
+			clocks = <&gcc GSBI7_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+			syscon-tcsr = <&tcsr>;
+
+			gsbi7_serial: serial@16640000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x16640000 0x1000>,
+				      <0x16600000 0x1000>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
+				clock-names = "core", "iface";
+				status = "disabled";
+			};
+		};
+
 		sata_phy: sata-phy@1b400000 {
 			compatible = "qcom,ipq806x-sata-phy";
 			reg = <0x1b400000 0x200>;