From: Ivo van Doorn Date: Tue, 3 Jun 2008 20:45:35 +0000 (+0200) Subject: rt2x00: Calculate register offset during compile time X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9dad92b9ba49eaab72513d821ae43298bcf93b90;p=openwrt%2Fstaging%2Fblogic.git rt2x00: Calculate register offset during compile time By using __ffs() the register offsets were always calculated at run-time which all FIELD32/FIELD16 definitions were builtin constants. This means we can heavily optimize the register handling by allowing GCC to do all the work during compilation. Add some compile_ffs() macros to perform the calculation at compile time. After this each rt2x00 module size is reduced by ~2500 bytes. And the stack size of several functions is reduced as well which further limits the number of rt2x00 results in 'make checkstack'. v2: Merge GertJan's bugfix of patch [1/11] directly into this patch       instead of providing it as seperate patch. v3: Add extra parentheses when bitshifting __x Signed-off-by: Gertjan van Wingerde Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/rt2x00/rt2x00reg.h b/drivers/net/wireless/rt2x00/rt2x00reg.h index 3f255df58b78..b0d27edcc330 100644 --- a/drivers/net/wireless/rt2x00/rt2x00reg.h +++ b/drivers/net/wireless/rt2x00/rt2x00reg.h @@ -130,40 +130,71 @@ struct rt2x00_field32 { /* * Power of two check, this will check - * if the mask that has been given contains - * and contiguous set of bits. + * if the mask that has been given contains and contiguous set of bits. + * Note that we cannot use the is_power_of_2() function since this + * check must be done at compile-time. */ #define is_power_of_two(x) ( !((x) & ((x)-1)) ) #define low_bit_mask(x) ( ((x)-1) & ~(x) ) #define is_valid_mask(x) is_power_of_two(1 + (x) + low_bit_mask(x)) +/* + * Macro's to find first set bit in a variable. + * These macro's behaves the same as the __ffs() function with + * the most important difference that this is done during + * compile-time rather then run-time. + */ +#define compile_ffs2(__x) \ + ( ((__x) & 0x1) ? 0 : 1 ) + +#define compile_ffs4(__x) \ + ( ((__x) & 0x3) ? \ + compile_ffs2(__x) : (compile_ffs2((__x) >> 2) + 2) ) + +#define compile_ffs8(__x) \ + ( ((__x) & 0xf) ? \ + compile_ffs4(__x) : (compile_ffs4((__x) >> 4) + 4) ) + +#define compile_ffs16(__x) \ + ( ((__x) & 0xff) ? \ + compile_ffs8(__x) : (compile_ffs8((__x) >> 8) + 8) ) + +#define compile_ffs32(__x) \ + ( ((__x) & 0xffff) ? \ + compile_ffs16(__x) : (compile_ffs16((__x) >> 16) + 16) ) + +/* + * This macro will check the requirements for the FIELD{8,16,32} macros + * The mask should be a constant non-zero contiguous set of bits which + * does not exceed the given typelimit. + */ +#define FIELD_CHECK(__mask, __type) \ + BUILD_BUG_ON(!__builtin_constant_p(__mask) || \ + !(__mask) || \ + !is_valid_mask(__mask) || \ + (__mask) != (__type)(__mask)) \ + #define FIELD8(__mask) \ ({ \ - BUILD_BUG_ON(!(__mask) || \ - !is_valid_mask(__mask) || \ - (__mask) != (u8)(__mask)); \ + FIELD_CHECK(__mask, u8); \ (struct rt2x00_field8) { \ - __ffs(__mask), (__mask) \ + compile_ffs8(__mask), (__mask) \ }; \ }) #define FIELD16(__mask) \ ({ \ - BUILD_BUG_ON(!(__mask) || \ - !is_valid_mask(__mask) || \ - (__mask) != (u16)(__mask));\ + FIELD_CHECK(__mask, u16); \ (struct rt2x00_field16) { \ - __ffs(__mask), (__mask) \ + compile_ffs16(__mask), (__mask) \ }; \ }) #define FIELD32(__mask) \ ({ \ - BUILD_BUG_ON(!(__mask) || \ - !is_valid_mask(__mask) || \ - (__mask) != (u32)(__mask));\ + FIELD_CHECK(__mask, u32); \ (struct rt2x00_field32) { \ - __ffs(__mask), (__mask) \ + compile_ffs32(__mask), (__mask) \ }; \ })