From: Felix Fietkau Date: Mon, 6 May 2013 22:35:50 +0000 (+0000) Subject: iw: update to 3.10, sync with nl80211.h changes in compat-wireless X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9d8e3e03df5b1c5b29a15b66ba9845bdf9b68539;p=openwrt%2Fstaging%2Fjow.git iw: update to 3.10, sync with nl80211.h changes in compat-wireless Signed-off-by: Felix Fietkau SVN-Revision: 36569 --- diff --git a/package/network/utils/iw/Makefile b/package/network/utils/iw/Makefile index 91167d8b3b..1ee8861648 100644 --- a/package/network/utils/iw/Makefile +++ b/package/network/utils/iw/Makefile @@ -8,12 +8,12 @@ include $(TOPDIR)/rules.mk PKG_NAME:=iw -PKG_VERSION:=3.6 +PKG_VERSION:=3.10 PKG_RELEASE:=1 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2 -PKG_SOURCE_URL:=http://wireless.kernel.org/download/iw/ -PKG_MD5SUM:=1c18bfbbc8773629e5e8ac733a39540c +PKG_SOURCE_URL:=https://www.kernel.org/pub/software/network/iw +PKG_MD5SUM:=0dc736963455937278b10fe8a2157e47 PKG_MAINTAINER:=Felix Fietkau diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index fc28a652d5..e20484ac2f 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -1,416 +1,32 @@ --- a/nl80211.h +++ b/nl80211.h -@@ -118,8 +118,9 @@ - * to get a list of all present wiphys. - * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or - * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, -- * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, -- * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, -+ * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the -+ * attributes determining the channel width; this is used for setting -+ * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, - * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, - * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. - * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL -@@ -171,7 +172,7 @@ - * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, - * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT. - * The channel to use can be set on the interface or be given using the -- * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_CHANNEL_TYPE attrs. -+ * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. - * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP - * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface - * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP -@@ -401,8 +402,7 @@ - * a response while being associated to an AP on another channel. - * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus - * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the -- * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be -- * optionally used to specify additional channel parameters. -+ * frequency for the operation. - * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds - * to remain on the channel. This command is also used as an event to - * notify when the requested duration starts (it may take a while for the -@@ -440,12 +440,11 @@ - * as an event indicating reception of a frame that was not processed in - * kernel code, but is for us (i.e., which may need to be processed in a - * user space application). %NL80211_ATTR_FRAME is used to specify the -- * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and -- * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on -- * which channel the frame is to be transmitted or was received. If this -- * channel is not the current channel (remain-on-channel or the -- * operational channel) the device will switch to the given channel and -- * transmit the frame, optionally waiting for a response for the time -+ * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used -+ * to indicate on which channel the frame is to be transmitted or was -+ * received. If this channel is not the current channel (remain-on-channel -+ * or the operational channel) the device will switch to the given channel -+ * and transmit the frame, optionally waiting for a response for the time - * specified using %NL80211_ATTR_DURATION. When called, this operation - * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the - * TX status event pertaining to the TX request. -@@ -473,8 +472,8 @@ - * command is used as an event to indicate the that a trigger level was - * reached. - * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ -- * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed -- * by %NL80211_ATTR_IFINDEX) shall operate on. -+ * and the attributes determining channel width) the given interface -+ * (identifed by %NL80211_ATTR_IFINDEX) shall operate on. - * In case multiple channels are supported by the device, the mechanism - * with which it switches channels is implementation-defined. - * When a monitor interface is given, it can only switch channel while -@@ -526,6 +525,12 @@ - * of PMKSA caching dandidates. - * - * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). -+ * In addition, this can be used as an event to request userspace to take -+ * actions on TDLS links (set up a new link or tear down an existing one). -+ * In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested -+ * operation, %NL80211_ATTR_MAC contains the peer MAC address, and -+ * %NL80211_ATTR_REASON_CODE the reason code to be used (only with -+ * %NL80211_TDLS_TEARDOWN). - * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. - * - * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP -@@ -562,8 +567,24 @@ - * - * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels - * independently of the userspace SME, send this event indicating -- * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with -- * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. -+ * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the -+ * attributes determining channel width. -+ * -+ * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by -+ * its %NL80211_ATTR_WDEV identifier. It must have been created with -+ * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the -+ * P2P Device can be used for P2P operations, e.g. remain-on-channel and -+ * public action frame TX. -+ * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by -+ * its %NL80211_ATTR_WDEV identifier. -+ * -+ * @NL80211_CMD_CONN_FAILED: connection request to an AP failed; used to -+ * notify userspace that AP has rejected the connection request from a -+ * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON -+ * is used for this. -+ * -+ * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames -+ * for IBSS or MESH vif. - * - * @NL80211_CMD_MAX: highest used command number - * @__NL80211_CMD_AFTER_LAST: internal use -@@ -708,6 +729,13 @@ enum nl80211_commands { +@@ -1724,8 +1724,7 @@ enum nl80211_attrs { + NL80211_ATTR_MDID, + NL80211_ATTR_IE_RIC, - NL80211_CMD_CH_SWITCH_NOTIFY, - -+ NL80211_CMD_START_P2P_DEVICE, -+ NL80211_CMD_STOP_P2P_DEVICE, -+ -+ NL80211_CMD_CONN_FAILED, -+ -+ NL80211_CMD_SET_MCAST_RATE, -+ - /* add new commands above here */ - - /* used to define NL80211_CMD_MAX below */ -@@ -744,14 +772,26 @@ enum nl80211_commands { - * /sys/class/ieee80211//index - * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) - * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters -- * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz -+ * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz, -+ * defines the channel together with the (deprecated) -+ * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes -+ * %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1 -+ * and %NL80211_ATTR_CENTER_FREQ2 -+ * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values -+ * of &enum nl80211_chan_width, describing the channel width. See the -+ * documentation of the enum for more information. -+ * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the -+ * channel, used for anything but 20 MHz bandwidth -+ * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the -+ * channel, used only for 80+80 MHz bandwidth - * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ -- * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): -+ * if HT20 or HT40 are to be used (i.e., HT disabled if not included): - * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including - * this attribute) - * NL80211_CHAN_HT20 = HT20 only - * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel - * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel -+ * This attribute is now deprecated. - * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is - * less than or equal to the RTS threshold; allowed range: 1..255; - * dot11ShortRetryLimit; u8 -@@ -1251,6 +1291,25 @@ enum nl80211_commands { - * was used to provide the hint. For the different types of - * allowed user regulatory hints see nl80211_user_reg_hint_type. - * -+ * @NL80211_ATTR_CONN_FAILED_REASON: The reason for which AP has rejected -+ * the connection request from a station. nl80211_connect_failed_reason -+ * enum has different reasons of connection failure. -+ * -+ * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts -+ * with the Authentication transaction sequence number field. -+ * -+ * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from -+ * association request when used with NL80211_CMD_NEW_STATION) -+ * -+ * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32) -+ * -+ * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with -+ * the START_AP and SET_BSS commands -+ * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the -+ * START_AP and SET_BSS commands. This can have the values 0 or 1; -+ * if not given in START_AP 0 is assumed, if not given in SET_BSS -+ * no change is made. -+ * - * @NL80211_ATTR_MAX: highest attribute number currently defined - * @__NL80211_ATTR_AFTER_LAST: internal use - */ -@@ -1506,6 +1565,23 @@ enum nl80211_attrs { - - NL80211_ATTR_USER_REG_HINT_TYPE, - -+ NL80211_ATTR_CONN_FAILED_REASON, -+ -+ NL80211_ATTR_SAE_DATA, -+ -+ NL80211_ATTR_VHT_CAPABILITY, -+ -+ NL80211_ATTR_SCAN_FLAGS, -+ -+ NL80211_ATTR_CHANNEL_WIDTH, -+ NL80211_ATTR_CENTER_FREQ1, -+ NL80211_ATTR_CENTER_FREQ2, -+ -+ NL80211_ATTR_P2P_CTWINDOW, -+ NL80211_ATTR_P2P_OPPPS, -+ +- NL80211_ATTR_CRIT_PROT_ID, +- NL80211_ATTR_MAX_CRIT_PROT_DURATION, + NL80211_ATTR_WIPHY_ANTENNA_GAIN, -+ - /* add attributes here, update the policy in nl80211.c */ - - __NL80211_ATTR_AFTER_LAST, -@@ -1549,6 +1625,7 @@ enum nl80211_attrs { - #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 - #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 - #define NL80211_HT_CAPABILITY_LEN 26 -+#define NL80211_VHT_CAPABILITY_LEN 12 - - #define NL80211_MAX_NR_CIPHER_SUITES 5 - #define NL80211_MAX_NR_AKM_SUITES 2 -@@ -1575,6 +1652,10 @@ enum nl80211_attrs { - * @NL80211_IFTYPE_MESH_POINT: mesh point - * @NL80211_IFTYPE_P2P_CLIENT: P2P client - * @NL80211_IFTYPE_P2P_GO: P2P group owner -+ * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev -+ * and therefore can't be created in the normal ways, use the -+ * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE -+ * commands to create and destroy one - * @NL80211_IFTYPE_MAX: highest interface type number currently defined - * @NUM_NL80211_IFTYPES: number of defined interface types - * -@@ -1593,6 +1674,7 @@ enum nl80211_iftype { - NL80211_IFTYPE_MESH_POINT, - NL80211_IFTYPE_P2P_CLIENT, - NL80211_IFTYPE_P2P_GO, -+ NL80211_IFTYPE_P2P_DEVICE, - /* keep last */ - NUM_NL80211_IFTYPES, -@@ -1664,10 +1746,15 @@ struct nl80211_sta_flag_update { - * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved - * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) - * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) -- * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate -+ * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate - * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval - * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) - * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined -+ * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) -+ * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) -+ * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate -+ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate -+ * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate - * @__NL80211_RATE_INFO_AFTER_LAST: internal use - */ - enum nl80211_rate_info { -@@ -1677,6 +1764,11 @@ enum nl80211_rate_info { - NL80211_RATE_INFO_40_MHZ_WIDTH, - NL80211_RATE_INFO_SHORT_GI, - NL80211_RATE_INFO_BITRATE32, -+ NL80211_RATE_INFO_VHT_MCS, -+ NL80211_RATE_INFO_VHT_NSS, -+ NL80211_RATE_INFO_80_MHZ_WIDTH, -+ NL80211_RATE_INFO_80P80_MHZ_WIDTH, -+ NL80211_RATE_INFO_160_MHZ_WIDTH, + /* add attributes here, update the policy in nl80211.c */ - /* keep last */ - __NL80211_RATE_INFO_AFTER_LAST, -@@ -1744,6 +1836,8 @@ enum nl80211_sta_bss_param { - * @NL80211_STA_INFO_STA_FLAGS: Contains a struct nl80211_sta_flag_update. - * @NL80211_STA_INFO_BEACON_LOSS: count of times beacon loss was detected (u32) - * @NL80211_STA_INFO_T_OFFSET: timing offset with respect to this STA (s64) +@@ -1991,6 +1990,10 @@ enum nl80211_sta_bss_param { + * @NL80211_STA_INFO_PEER_PM: peer mesh STA link-specific power mode + * @NL80211_STA_INFO_NONPEER_PM: neighbor mesh STA power save mode towards + * non-peer STA + * @NL80211_STA_INFO_CHAIN_SIGNAL: per-chain signal strength of last PPDU ++ * Contains a nested array of signal strength attributes (u8, dBm) + * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average ++ * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ -@@ -1768,6 +1862,8 @@ enum nl80211_sta_info { - NL80211_STA_INFO_STA_FLAGS, - NL80211_STA_INFO_BEACON_LOSS, - NL80211_STA_INFO_T_OFFSET, +@@ -2020,6 +2023,8 @@ enum nl80211_sta_info { + NL80211_STA_INFO_NONPEER_PM, + NL80211_STA_INFO_RX_BYTES64, + NL80211_STA_INFO_TX_BYTES64, + NL80211_STA_INFO_CHAIN_SIGNAL, + NL80211_STA_INFO_CHAIN_SIGNAL_AVG, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, -@@ -2385,6 +2481,15 @@ enum nl80211_ac { - #define NL80211_TXQ_Q_BE NL80211_AC_BE - #define NL80211_TXQ_Q_BK NL80211_AC_BK - -+/** -+ * enum nl80211_channel_type - channel type -+ * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel -+ * @NL80211_CHAN_HT20: 20 MHz HT channel -+ * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel -+ * below the control channel -+ * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel -+ * above the control channel -+ */ - enum nl80211_channel_type { - NL80211_CHAN_NO_HT, - NL80211_CHAN_HT20, -@@ -2393,6 +2498,32 @@ enum nl80211_channel_type { - }; - - /** -+ * enum nl80211_chan_width - channel width definitions -+ * -+ * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH -+ * attribute. -+ * -+ * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel -+ * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel -+ * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 -+ * attribute must be provided as well -+ * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 -+ * attribute must be provided as well -+ * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 -+ * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well -+ * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 -+ * attribute must be provided as well -+ */ -+enum nl80211_chan_width { -+ NL80211_CHAN_WIDTH_20_NOHT, -+ NL80211_CHAN_WIDTH_20, -+ NL80211_CHAN_WIDTH_40, -+ NL80211_CHAN_WIDTH_80, -+ NL80211_CHAN_WIDTH_80P80, -+ NL80211_CHAN_WIDTH_160, -+}; -+ -+/** - * enum nl80211_bss - netlink attributes for a BSS - * - * @__NL80211_BSS_INVALID: invalid -@@ -2460,6 +2591,7 @@ enum nl80211_bss_status { - * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) - * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) - * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) -+ * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals - * @__NL80211_AUTHTYPE_NUM: internal - * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm - * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by -@@ -2471,6 +2603,7 @@ enum nl80211_auth_type { - NL80211_AUTHTYPE_SHARED_KEY, - NL80211_AUTHTYPE_FT, - NL80211_AUTHTYPE_NETWORK_EAP, -+ NL80211_AUTHTYPE_SAE, - - /* keep last */ - __NL80211_AUTHTYPE_NUM, -@@ -2994,12 +3127,40 @@ enum nl80211_ap_sme_features { - * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested - * to work properly to suppport receiving regulatory hints from - * cellular base stations. -+ * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active -+ * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel -+ * in the interface combinations, even when it's only used for scan -+ * and remain-on-channel. This could be due to, for example, the -+ * remain-on-channel implementation requiring a channel context. -+ * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of -+ * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station -+ * mode -+ * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan -+ * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported -+ * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif -+ * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting -+ * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform -+ * OBSS scans and generate 20/40 BSS coex reports. This flag is used only -+ * for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied. -+ * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window -+ * setting -+ * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic -+ * powersave - */ - enum nl80211_feature_flags { -- NL80211_FEATURE_SK_TX_STATUS = 1 << 0, -- NL80211_FEATURE_HT_IBSS = 1 << 1, -- NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, -- NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, -+ NL80211_FEATURE_SK_TX_STATUS = 1 << 0, -+ NL80211_FEATURE_HT_IBSS = 1 << 1, -+ NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, -+ NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, -+ NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, -+ NL80211_FEATURE_SAE = 1 << 5, -+ NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, -+ NL80211_FEATURE_SCAN_FLUSH = 1 << 7, -+ NL80211_FEATURE_AP_SCAN = 1 << 8, -+ NL80211_FEATURE_VIF_TXPOWER = 1 << 9, -+ NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, -+ NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, -+ NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, - }; - - /** -@@ -3023,4 +3184,36 @@ enum nl80211_probe_resp_offload_support_ - NL80211_PROBE_RESP_OFFLOAD_SUPPORT_80211U = 1<<3, - }; - -+/** -+ * enum nl80211_connect_failed_reason - connection request failed reasons -+ * @NL80211_CONN_FAIL_MAX_CLIENTS: Maximum number of clients that can be -+ * handled by the AP is reached. -+ * @NL80211_CONN_FAIL_BLOCKED_CLIENT: Client's MAC is in the AP's blocklist. -+ */ -+enum nl80211_connect_failed_reason { -+ NL80211_CONN_FAIL_MAX_CLIENTS, -+ NL80211_CONN_FAIL_BLOCKED_CLIENT, -+}; -+ -+/** -+ * enum nl80211_scan_flags - scan request control flags -+ * -+ * Scan request control flags are used to control the handling -+ * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN -+ * requests. -+ * -+ * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority -+ * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning -+ * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured -+ * as AP and the beaconing has already been configured. This attribute is -+ * dangerous because will destroy stations performance as a lot of frames -+ * will be lost while scanning off-channel, therefore it must be used only -+ * when really needed -+ */ -+enum nl80211_scan_flags { -+ NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, -+ NL80211_SCAN_FLAG_FLUSH = 1<<1, -+ NL80211_SCAN_FLAG_AP = 1<<2, -+}; -+ - #endif /* __LINUX_NL80211_H */ diff --git a/package/network/utils/iw/patches/100-rx_rate.patch b/package/network/utils/iw/patches/100-rx_rate.patch index 642b9f3570..cc23e07501 100644 --- a/package/network/utils/iw/patches/100-rx_rate.patch +++ b/package/network/utils/iw/patches/100-rx_rate.patch @@ -1,55 +1,15 @@ --- a/station.c +++ b/station.c -@@ -29,13 +29,47 @@ enum plink_actions { - PLINK_ACTION_BLOCK, - }; +@@ -43,7 +43,7 @@ static void print_power_mode(struct nlat + } + } -+static void print_sta_bitrate(struct nlattr *nla, const char *name) -+{ -+ struct nlattr *rinfo[NL80211_RATE_INFO_MAX + 1]; -+ -+ static struct nla_policy rate_policy[NL80211_RATE_INFO_MAX + 1] = { -+ [NL80211_RATE_INFO_BITRATE] = { .type = NLA_U16 }, -+ [NL80211_RATE_INFO_BITRATE32] = { .type = NLA_U32 }, -+ [NL80211_RATE_INFO_MCS] = { .type = NLA_U8 }, -+ [NL80211_RATE_INFO_40_MHZ_WIDTH] = { .type = NLA_FLAG }, -+ [NL80211_RATE_INFO_SHORT_GI] = { .type = NLA_FLAG }, -+ }; -+ -+ if (!nla) -+ return; -+ -+ if (nla_parse_nested(rinfo, NL80211_RATE_INFO_MAX, nla, rate_policy)) { -+ fprintf(stderr, "failed to parse nested rate attributes!\n"); -+ } else { -+ int rate = 0; -+ printf("\n\t%s:\t", name); -+ if (rinfo[NL80211_RATE_INFO_BITRATE32]) -+ rate = nla_get_u32(rinfo[NL80211_RATE_INFO_BITRATE32]); -+ else if (rinfo[NL80211_RATE_INFO_BITRATE]) -+ rate = nla_get_u16(rinfo[NL80211_RATE_INFO_BITRATE]); -+ if (rate > 0) -+ printf("%d.%d MBit/s", rate / 10, rate % 10); -+ -+ if (rinfo[NL80211_RATE_INFO_MCS]) -+ printf(" MCS %d", nla_get_u8(rinfo[NL80211_RATE_INFO_MCS])); -+ if (rinfo[NL80211_RATE_INFO_40_MHZ_WIDTH]) -+ printf(" 40Mhz"); -+ if (rinfo[NL80211_RATE_INFO_SHORT_GI]) -+ printf(" short GI"); -+ } -+} - - static int print_sta_handler(struct nl_msg *msg, void *arg) +-void parse_tx_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen) ++void parse_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen) { - struct nlattr *tb[NL80211_ATTR_MAX + 1]; - struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg)); - struct nlattr *sinfo[NL80211_STA_INFO_MAX + 1]; -- struct nlattr *rinfo[NL80211_RATE_INFO_MAX + 1]; - char mac_addr[20], state_name[10], dev[20]; - struct nl80211_sta_flag_update *sta_flags; - static struct nla_policy stats_policy[NL80211_STA_INFO_MAX + 1] = { -@@ -47,6 +81,7 @@ static int print_sta_handler(struct nl_m + int rate = 0; + char *pos = buf; +@@ -107,6 +107,7 @@ static int print_sta_handler(struct nl_m [NL80211_STA_INFO_SIGNAL] = { .type = NLA_U8 }, [NL80211_STA_INFO_T_OFFSET] = { .type = NLA_U64 }, [NL80211_STA_INFO_TX_BITRATE] = { .type = NLA_NESTED }, @@ -57,49 +17,44 @@ [NL80211_STA_INFO_LLID] = { .type = NLA_U16 }, [NL80211_STA_INFO_PLID] = { .type = NLA_U16 }, [NL80211_STA_INFO_PLINK_STATE] = { .type = NLA_U8 }, -@@ -56,14 +91,6 @@ static int print_sta_handler(struct nl_m - { .minlen = sizeof(struct nl80211_sta_flag_update) }, - }; - -- static struct nla_policy rate_policy[NL80211_RATE_INFO_MAX + 1] = { -- [NL80211_RATE_INFO_BITRATE] = { .type = NLA_U16 }, -- [NL80211_RATE_INFO_BITRATE32] = { .type = NLA_U32 }, -- [NL80211_RATE_INFO_MCS] = { .type = NLA_U8 }, -- [NL80211_RATE_INFO_40_MHZ_WIDTH] = { .type = NLA_FLAG }, -- [NL80211_RATE_INFO_SHORT_GI] = { .type = NLA_FLAG }, -- }; -- - nla_parse(tb, NL80211_ATTR_MAX, genlmsg_attrdata(gnlh, 0), - genlmsg_attrlen(gnlh, 0), NULL); - -@@ -119,28 +146,8 @@ static int print_sta_handler(struct nl_m - printf("\n\tToffset:\t%lld us", - (unsigned long long)nla_get_u64(sinfo[NL80211_STA_INFO_T_OFFSET])); +@@ -177,10 +178,17 @@ static int print_sta_handler(struct nl_m + if (sinfo[NL80211_STA_INFO_TX_BITRATE]) { + char buf[100]; -- if (sinfo[NL80211_STA_INFO_TX_BITRATE]) { -- if (nla_parse_nested(rinfo, NL80211_RATE_INFO_MAX, -- sinfo[NL80211_STA_INFO_TX_BITRATE], rate_policy)) { -- fprintf(stderr, "failed to parse nested rate attributes!\n"); -- } else { -- int rate = 0; -- printf("\n\ttx bitrate:\t"); -- if (rinfo[NL80211_RATE_INFO_BITRATE32]) -- rate = nla_get_u32(rinfo[NL80211_RATE_INFO_BITRATE32]); -- else if (rinfo[NL80211_RATE_INFO_BITRATE]) -- rate = nla_get_u16(rinfo[NL80211_RATE_INFO_BITRATE]); -- if (rate > 0) -- printf("%d.%d MBit/s", rate / 10, rate % 10); -- -- if (rinfo[NL80211_RATE_INFO_MCS]) -- printf(" MCS %d", nla_get_u8(rinfo[NL80211_RATE_INFO_MCS])); -- if (rinfo[NL80211_RATE_INFO_40_MHZ_WIDTH]) -- printf(" 40Mhz"); -- if (rinfo[NL80211_RATE_INFO_SHORT_GI]) -- printf(" short GI"); -- } -- } -+ print_sta_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], "tx bitrate"); -+ print_sta_bitrate(sinfo[NL80211_STA_INFO_RX_BITRATE], "rx bitrate"); +- parse_tx_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], buf, sizeof(buf)); ++ parse_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], buf, sizeof(buf)); + printf("\n\ttx bitrate:\t%s", buf); + } ++ if (sinfo[NL80211_STA_INFO_RX_BITRATE]) { ++ char buf[100]; ++ ++ parse_bitrate(sinfo[NL80211_STA_INFO_RX_BITRATE], buf, sizeof(buf)); ++ printf("\n\trx bitrate:\t%s", buf); ++ } ++ if (sinfo[NL80211_STA_INFO_LLID]) printf("\n\tmesh llid:\t%d", + nla_get_u16(sinfo[NL80211_STA_INFO_LLID])); +--- a/iw.h ++++ b/iw.h +@@ -170,7 +170,7 @@ enum print_ie_type { + void print_ies(unsigned char *ie, int ielen, bool unknown, + enum print_ie_type ptype); + +-void parse_tx_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen); ++void parse_bitrate(struct nlattr *bitrate_attr, char *buf, int buflen); + + DECLARE_SECTION(set); + DECLARE_SECTION(get); +--- a/link.c ++++ b/link.c +@@ -165,7 +165,7 @@ static int print_link_sta(struct nl_msg + if (sinfo[NL80211_STA_INFO_TX_BITRATE]) { + char buf[100]; + +- parse_tx_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], buf, sizeof(buf)); ++ parse_bitrate(sinfo[NL80211_STA_INFO_TX_BITRATE], buf, sizeof(buf)); + printf("\ttx bitrate: %s\n", buf); + } + diff --git a/package/network/utils/iw/patches/110-per_chain_signal_strength.patch b/package/network/utils/iw/patches/110-per_chain_signal_strength.patch index 813a7d9165..e519a86c6a 100644 --- a/package/network/utils/iw/patches/110-per_chain_signal_strength.patch +++ b/package/network/utils/iw/patches/110-per_chain_signal_strength.patch @@ -1,7 +1,7 @@ --- a/station.c +++ b/station.c -@@ -65,6 +65,33 @@ static void print_sta_bitrate(struct nla - } +@@ -91,6 +91,33 @@ void parse_bitrate(struct nlattr *bitrat + " VHT-NSS %d", nla_get_u8(rinfo[NL80211_RATE_INFO_VHT_NSS])); } +static char *get_chain_signal(struct nlattr *attr_list) @@ -34,10 +34,10 @@ static int print_sta_handler(struct nl_msg *msg, void *arg) { struct nlattr *tb[NL80211_ATTR_MAX + 1]; -@@ -89,7 +116,10 @@ static int print_sta_handler(struct nl_m - [NL80211_STA_INFO_TX_FAILED] = { .type = NLA_U32 }, - [NL80211_STA_INFO_STA_FLAGS] = - { .minlen = sizeof(struct nl80211_sta_flag_update) }, +@@ -118,7 +145,10 @@ static int print_sta_handler(struct nl_m + [NL80211_STA_INFO_LOCAL_PM] = { .type = NLA_U32}, + [NL80211_STA_INFO_PEER_PM] = { .type = NLA_U32}, + [NL80211_STA_INFO_NONPEER_PM] = { .type = NLA_U32}, + [NL80211_STA_INFO_CHAIN_SIGNAL] = { .type = NLA_NESTED }, + [NL80211_STA_INFO_CHAIN_SIGNAL_AVG] = { .type = NLA_NESTED }, }; @@ -45,7 +45,7 @@ nla_parse(tb, NL80211_ATTR_MAX, genlmsg_attrdata(gnlh, 0), genlmsg_attrlen(gnlh, 0), NULL); -@@ -136,12 +166,19 @@ static int print_sta_handler(struct nl_m +@@ -165,12 +195,19 @@ static int print_sta_handler(struct nl_m if (sinfo[NL80211_STA_INFO_TX_FAILED]) printf("\n\ttx failed:\t%u", nla_get_u32(sinfo[NL80211_STA_INFO_TX_FAILED])); diff --git a/package/network/utils/iw/patches/120-antenna_gain.patch b/package/network/utils/iw/patches/120-antenna_gain.patch new file mode 100644 index 0000000000..36043611da --- /dev/null +++ b/package/network/utils/iw/patches/120-antenna_gain.patch @@ -0,0 +1,34 @@ +--- a/phy.c ++++ b/phy.c +@@ -421,3 +421,31 @@ COMMAND(set, antenna, " | all | + NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna, + "Set a bitmap of allowed antennas to use for TX and RX.\n" + "The driver may reject antenna configurations it cannot support."); ++ ++static int handle_antenna_gain(struct nl80211_state *state, ++ struct nl_cb *cb, ++ struct nl_msg *msg, ++ int argc, char **argv, ++ enum id_input id) ++{ ++ char *endptr; ++ int dbm; ++ ++ /* get the required args */ ++ if (argc != 1) ++ return 1; ++ ++ dbm = strtol(argv[0], &endptr, 10); ++ if (*endptr) ++ return 2; ++ ++ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_GAIN, dbm); ++ ++ return 0; ++ ++ nla_put_failure: ++ return -ENOBUFS; ++} ++COMMAND(set, antenna_gain, "", ++ NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna_gain, ++ "Specify antenna gain."); diff --git a/package/network/utils/iw/patches/120-tdls_peer_indentation.patch b/package/network/utils/iw/patches/120-tdls_peer_indentation.patch deleted file mode 100644 index 68368734e1..0000000000 --- a/package/network/utils/iw/patches/120-tdls_peer_indentation.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/station.c -+++ b/station.c -@@ -267,7 +267,7 @@ static int print_sta_handler(struct nl_m - } - - if (sta_flags->mask & BIT(NL80211_STA_FLAG_TDLS_PEER)) { -- printf("\n\tTDLS peer:\t\t"); -+ printf("\n\tTDLS peer:\t"); - if (sta_flags->set & BIT(NL80211_STA_FLAG_TDLS_PEER)) - printf("yes"); - else diff --git a/package/network/utils/iw/patches/130-antenna_gain.patch b/package/network/utils/iw/patches/130-antenna_gain.patch deleted file mode 100644 index f3ca691e50..0000000000 --- a/package/network/utils/iw/patches/130-antenna_gain.patch +++ /dev/null @@ -1,34 +0,0 @@ ---- a/phy.c -+++ b/phy.c -@@ -359,3 +359,31 @@ COMMAND(set, antenna, " | all | - NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna, - "Set a bitmap of allowed antennas to use for TX and RX.\n" - "The driver may reject antenna configurations it cannot support."); -+ -+static int handle_antenna_gain(struct nl80211_state *state, -+ struct nl_cb *cb, -+ struct nl_msg *msg, -+ int argc, char **argv, -+ enum id_input id) -+{ -+ char *endptr; -+ int dbm; -+ -+ /* get the required args */ -+ if (argc != 1) -+ return 1; -+ -+ dbm = strtol(argv[0], &endptr, 10); -+ if (*endptr) -+ return 2; -+ -+ NLA_PUT_U32(msg, NL80211_ATTR_WIPHY_ANTENNA_GAIN, dbm); -+ -+ return 0; -+ -+ nla_put_failure: -+ return -ENOBUFS; -+} -+COMMAND(set, antenna_gain, "", -+ NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_antenna_gain, -+ "Specify antenna gain.");