From: Mathias Kresin Date: Sat, 21 May 2016 10:16:36 +0000 (+0200) Subject: lantiq: VG3503J - merge profiles X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9d0608eef3e5b9fca19ece2c5fcc90659f8630a6;p=openwrt%2Fstaging%2Fldir.git lantiq: VG3503J - merge profiles The only difference between the VG3503J profiles is the version of the gphy firmware that gets loaded. This can be handled perfect fine in one device tree source file. Signed-off-by: Mathias Kresin --- diff --git a/target/linux/lantiq/dts/VG3503J.dts b/target/linux/lantiq/dts/VG3503J.dts index b4b3cf5aec..36c772d34b 100644 --- a/target/linux/lantiq/dts/VG3503J.dts +++ b/target/linux/lantiq/dts/VG3503J.dts @@ -1,11 +1,183 @@ -/dts-v1/; - -/include/ "VG3503J.dtsi" +/include/ "vr9.dtsi" / { + model = "VG3503J - BT OpenReach VDSL Modem"; + + chosen { + bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; + + leds { + boot = &power_green; + failsafe = &power_red; + running = &power_green; + + internet = &dsl; + }; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + fpi@10000000 { + localbus@0 { + ranges = <0 0 0x0 0x3ffffff>; + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x20000>; + }; + + partition@20000 { + label = "kernel"; + reg = <0x20000 0x300000>; + }; + + partition@1a0000 { + label = "rootfs"; + reg = <0x320000 0x420000>; + }; + + partition@740000 { + label = "btagent"; + reg = <0x740000 0x80000>; + }; + + partition@7c0000 { + label = "pri_bfocus_cfg"; + reg = <0x7c0000 0x10000>; + }; + + partition@7d0000 { + label = "sec_bfocus_cfg"; + reg = <0x7d0000 0x10000>; + }; + + partition@7e0000 { + label = "sysconfig"; + reg = <0x7e0000 0x10000>; + }; + + partition@7f0000 { + label = "misc_cfg"; + reg = <0x7f0000 0x10000>; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + gphy-leds { + lantiq,groups = "gphy0 led0", "gphy0 led1", + "gphy0 led2", "gphy1 led0", + "gphy1 led1", "gphy1 led2"; + lantiq,function = "gphy"; + lantiq,pull = <2>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + }; + }; + }; + gphy-xrx200 { compatible = "lantiq,phy-xrx200"; - firmware = "lantiq/vr9_phy22f_a1x.bin"; + firmware1 = "lantiq/vr9_phy22f_a1x.bin"; /*VR9 1.1*/ + firmware2 = "lantiq/vr9_phy22f_a2x.bin"; /*VR9 1.2*/ phys = [ 00 01 ]; }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 6 1>; + linux,code = <0x198>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_red: power2 { + label = "vg3503j:red:power"; + gpios = <&gpio 14 1>; + }; + dsl: dsl { + label = "vg3503j:green:dsl"; + gpios = <&gpio 19 1>; + }; + power_green: power { + label = "vg3503j:green:power"; + gpios = <&gpio 28 1>; + default-state = "keep"; + }; + }; +}; + +ð0 { + interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mac-address = [ 00 11 22 33 44 55 ]; + lantiq,switch; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "mii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "mii"; + phy-handle = <&phy13>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,led1h = <0x70>; + lantiq,led1l = <0x00>; + lantiq,led2h = <0x00>; + lantiq,led2l = <0x03>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,led1h = <0x70>; + lantiq,led1l = <0x00>; + lantiq,led2h = <0x00>; + lantiq,led2l = <0x03>; + }; + }; }; diff --git a/target/linux/lantiq/dts/VG3503J.dtsi b/target/linux/lantiq/dts/VG3503J.dtsi deleted file mode 100644 index f68d22cceb..0000000000 --- a/target/linux/lantiq/dts/VG3503J.dtsi +++ /dev/null @@ -1,176 +0,0 @@ -/include/ "vr9.dtsi" - -/ { - model = "VG3503J - BT OpenReach VDSL Modem"; - - chosen { - bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; - - leds { - boot = &power_green; - failsafe = &power_red; - running = &power_green; - - internet = &dsl; - }; - }; - - memory@0 { - reg = <0x0 0x2000000>; - }; - - fpi@10000000 { - localbus@0 { - ranges = <0 0 0x0 0x3ffffff>; - nor-boot@0 { - compatible = "lantiq,nor"; - bank-width = <2>; - reg = <0 0x0 0x2000000>; - #address-cells = <1>; - #size-cells = <1>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "uboot"; - reg = <0x00000 0x20000>; - }; - - partition@20000 { - label = "kernel"; - reg = <0x20000 0x300000>; - }; - - partition@1a0000 { - label = "rootfs"; - reg = <0x320000 0x420000>; - }; - - partition@740000 { - label = "btagent"; - reg = <0x740000 0x80000>; - }; - - partition@7c0000 { - label = "pri_bfocus_cfg"; - reg = <0x7c0000 0x10000>; - }; - - partition@7d0000 { - label = "sec_bfocus_cfg"; - reg = <0x7d0000 0x10000>; - }; - - partition@7e0000 { - label = "sysconfig"; - reg = <0x7e0000 0x10000>; - }; - - partition@7f0000 { - label = "misc_cfg"; - reg = <0x7f0000 0x10000>; - }; - }; - }; - }; - - gpio: pinmux@E100B10 { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - mdio { - lantiq,groups = "mdio"; - lantiq,function = "mdio"; - }; - gphy-leds { - lantiq,groups = "gphy0 led0", "gphy0 led1", - "gphy0 led2", "gphy1 led0", - "gphy1 led1", "gphy1 led2"; - lantiq,function = "gphy"; - lantiq,pull = <2>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - }; - }; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - reset { - label = "reset"; - gpios = <&gpio 6 1>; - linux,code = <0x198>; - }; - }; - - gpio-leds { - compatible = "gpio-leds"; - - power_red: power2 { - label = "vg3503j:red:power"; - gpios = <&gpio 14 1>; - }; - dsl: dsl { - label = "vg3503j:green:dsl"; - gpios = <&gpio 19 1>; - }; - power_green: power { - label = "vg3503j:green:power"; - gpios = <&gpio 28 1>; - default-state = "keep"; - }; - }; -}; - -ð0 { - interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mac-address = [ 00 11 22 33 44 55 ]; - lantiq,switch; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "mii"; - phy-handle = <&phy11>; - }; - ethernet@4 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "mii"; - phy-handle = <&phy13>; - }; - }; - - mdio@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - lantiq,led1h = <0x70>; - lantiq,led1l = <0x00>; - lantiq,led2h = <0x00>; - lantiq,led2l = <0x03>; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - lantiq,led1h = <0x70>; - lantiq,led1l = <0x00>; - lantiq,led2h = <0x00>; - lantiq,led2l = <0x03>; - }; - }; -}; diff --git a/target/linux/lantiq/dts/VG3503J_V2.dts b/target/linux/lantiq/dts/VG3503J_V2.dts deleted file mode 100644 index 005d5bc1ad..0000000000 --- a/target/linux/lantiq/dts/VG3503J_V2.dts +++ /dev/null @@ -1,11 +0,0 @@ -/dts-v1/; - -/include/ "VG3503J.dtsi" - -/ { - gphy-xrx200 { - compatible = "lantiq,phy-xrx200"; - firmware = "lantiq/vr9_phy22f_a2x.bin"; - phys = [ 00 01 ]; - }; -}; diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile index 5f2956cab5..2b8a3c2080 100644 --- a/target/linux/lantiq/image/Makefile +++ b/target/linux/lantiq/image/Makefile @@ -435,9 +435,6 @@ Image/Build/Profile/FRITZ3370=$(call Image/BuildEVA/$(1),$(1),FRITZ3370) Image/BuildKernel/Profile/VG3503J=$(call Image/BuildKernelLoader/Template,VG3503J) Image/Build/Profile/VG3503J=$(call Image/BuildLoader/$(1),$(1),VG3503J) -Image/BuildKernel/Profile/VG3503J_V2=$(call Image/BuildKernelLoader/Template,VG3503J_V2) -Image/Build/Profile/VG3503J_V2=$(call Image/BuildLoader/$(1),$(1),VG3503J_V2) - $(eval $(call lantiqTpLink,TDW8970,TD-W8970v1)) $(eval $(call lantiqTpLink,TDW8980,TD-W8980v1)) $(eval $(call lantiqTpLink,VR200v,ArcherVR200V)) diff --git a/target/linux/lantiq/xrx200/profiles/arv.mk b/target/linux/lantiq/xrx200/profiles/arv.mk index 3dc22c00da..dda57309d9 100644 --- a/target/linux/lantiq/xrx200/profiles/arv.mk +++ b/target/linux/lantiq/xrx200/profiles/arv.mk @@ -4,12 +4,6 @@ endef $(eval $(call Profile,VG3503J)) -define Profile/VG3503J_V2 - NAME:=BT Openreach - ECI VDSL Modem v2 -endef - -$(eval $(call Profile,VG3503J_V2)) - define Profile/VGV7510KW22NOR NAME:=o2 Box 6431 / Arcadyan VGV7510KW22 (NOR) PACKAGES:=kmod-rt2800-pci wpad-mini kmod-usb-dwc2