From: David Bauer Date: Sat, 30 May 2020 14:24:03 +0000 (+0200) Subject: ar71xx: correct button type for TL-MR3020 mode slider X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9cafcbe0bdd601d07ed55bee0136f5d8393c37a8;p=openwrt%2Fstaging%2Fzorun.git ar71xx: correct button type for TL-MR3020 mode slider The TP-Link TL-MR3020 has a three-state mode slider which was previously integrated as a button (EV_KEY). This led to spurious activations of failsafe mode. Set the type for the button to switch (EV_SW), to avoid unintended activations of failsafe mode. Related: commit 27f3f493de06 ("gpio-button-hotplug: unify polled and interrupt code") Signed-off-by: David Bauer (cherry picked from commit b017a016cc0cd26f84a7e6b8de3dc02dc101e888) --- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c index 0a9dfbc8a0..e3b4087eff 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-mr3020.c @@ -79,7 +79,7 @@ static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = { }, { .desc = "sw1", - .type = EV_KEY, + .type = EV_SW, .code = BTN_0, .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, .gpio = TL_MR3020_GPIO_BTN_SW1, @@ -87,7 +87,7 @@ static struct gpio_keys_button tl_mr3020_gpio_keys[] __initdata = { }, { .desc = "sw2", - .type = EV_KEY, + .type = EV_SW, .code = BTN_1, .debounce_interval = TL_MR3020_KEYS_DEBOUNCE_INTERVAL, .gpio = TL_MR3020_GPIO_BTN_SW2,