From: Zoltan Herpai Date: Fri, 21 Nov 2014 18:42:43 +0000 (+0000) Subject: sunxi: add initial 3.18 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9c54f7f312c189c4cfaec68675589a666d37306c;p=openwrt%2Fstaging%2Fynezz.git sunxi: add initial 3.18 support Signed-off-by: Zoltan HERPAI SVN-Revision: 43337 --- diff --git a/target/linux/sunxi/patches-3.18/100-dt-sun7i-add_spi0_pins_a.patch b/target/linux/sunxi/patches-3.18/100-dt-sun7i-add_spi0_pins_a.patch new file mode 100644 index 0000000000..f0e3eea186 --- /dev/null +++ b/target/linux/sunxi/patches-3.18/100-dt-sun7i-add_spi0_pins_a.patch @@ -0,0 +1,28 @@ +From 0253d14782f80cfd1741d4ddd82b83dd7d44a91e Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Mon, 28 Jul 2014 22:44:59 +0200 +Subject: [PATCH] ARM: dts: sun7i: Add spi0_pins_a pinctrl setting + +Signed-off-by: Hans de Goede +--- + arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ + 1 file changed, 7 insertions(+) + +diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi +index 82097c9..4fb8930 100644 +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -784,6 +784,13 @@ + allwinner,pull = <0>; + }; + ++ spi0_pins_a: spi0@0 { ++ allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14"; ++ allwinner,function = "spi0"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ + spi1_pins_a: spi1@0 { + allwinner,pins = "PI16", "PI17", "PI18", "PI19"; + allwinner,function = "spi1"; diff --git a/target/linux/sunxi/patches-3.18/101-dt-sun7i-add-uart3_pins.patch b/target/linux/sunxi/patches-3.18/101-dt-sun7i-add-uart3_pins.patch new file mode 100644 index 0000000000..8f9c0e88bd --- /dev/null +++ b/target/linux/sunxi/patches-3.18/101-dt-sun7i-add-uart3_pins.patch @@ -0,0 +1,31 @@ +From e37ccbcd4587b7a2b943e23a9943b8917010b336 Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Wed, 1 Oct 2014 08:39:58 +0200 +Subject: [PATCH] ARM: dts: sun7i: Add uart3_pins_b pinctrl setting + +The uart3_pins_a multiplexes the uart3 pins to port G, add a pinctrl entry +for mapping them to port H (as used on the Bananapi). + +Signed-off-by: Hans de Goede +--- + arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ + 1 file changed, 7 insertions(+) + +diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi +index 4fb8930..cecf32c 100644 +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -677,6 +677,13 @@ + allwinner,pull = <0>; + }; + ++ uart3_pins_b: uart3@1 { ++ allwinner,pins = "PH0", "PH1"; ++ allwinner,function = "uart3"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ + uart4_pins_a: uart4@0 { + allwinner,pins = "PG10", "PG11"; + allwinner,function = "uart4"; diff --git a/target/linux/sunxi/patches-3.18/102-dt-sun7i-add_mmc2_pins.patch b/target/linux/sunxi/patches-3.18/102-dt-sun7i-add_mmc2_pins.patch new file mode 100644 index 0000000000..6a5878e5ac --- /dev/null +++ b/target/linux/sunxi/patches-3.18/102-dt-sun7i-add_mmc2_pins.patch @@ -0,0 +1,28 @@ +From f65624ca1b67c5683317b75da2c09ffadc22fa2e Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Wed, 1 Oct 2014 00:40:57 +0200 +Subject: [PATCH] ARM: dts: sun7i: Add mmc2_pins_a pinctrl definition + +Signed-off-by: Hans de Goede +--- + arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++ + 1 file changed, 7 insertions(+) + +diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi +index cecf32c..f0a75c6 100644 +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -833,6 +833,13 @@ + allwinner,pull = <1>; + }; + ++ mmc2_pins_a: mmc2@0 { ++ allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11"; ++ allwinner,function = "mmc2"; ++ allwinner,drive = <2>; ++ allwinner,pull = <1>; ++ }; ++ + mmc3_pins_a: mmc3@0 { + allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9"; + allwinner,function = "mmc3"; diff --git a/target/linux/sunxi/patches-3.18/110-input-add-sun4i-lradc.patch b/target/linux/sunxi/patches-3.18/110-input-add-sun4i-lradc.patch new file mode 100644 index 0000000000..0772f1572d --- /dev/null +++ b/target/linux/sunxi/patches-3.18/110-input-add-sun4i-lradc.patch @@ -0,0 +1,412 @@ +From 2c1fab89e83245a520871e807e233e66cbdb7c57 Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Wed, 1 Jan 2014 19:44:49 +0100 +Subject: [PATCH] input: Add new sun4i-lradc-keys driver + +Allwinnner sunxi SoCs have a low resolution adc (called lradc) which is +specifically designed to have various (tablet) keys (ie home, back, search, +etc). attached to it using a resistor network. This adds a driver for this. + +There are 2 channels, currently this driver only supports chan0 since there +are no boards known to use chan1. + +This has been tested on an olimex a10s-olinuxino-micro, a13-olinuxino, and +a20-olinuxino-micro. + +Signed-off-by: Hans de Goede +-- +Changes in v2: +-Change devicetree bindings to use a per key subnode, like gpio-keys does +--- + .../devicetree/bindings/input/sun4i-lradc-keys.txt | 62 +++++ + MAINTAINERS | 7 + + drivers/input/keyboard/Kconfig | 10 + + drivers/input/keyboard/Makefile | 1 + + drivers/input/keyboard/sun4i-lradc-keys.c | 258 +++++++++++++++++++++ + 5 files changed, 338 insertions(+) + create mode 100644 Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt + create mode 100644 drivers/input/keyboard/sun4i-lradc-keys.c + +diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt +new file mode 100644 +index 0000000..b9c32f6 +--- /dev/null ++++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt +@@ -0,0 +1,62 @@ ++Allwinner sun4i low res adc attached tablet keys ++------------------------------------------------ ++ ++Required properties: ++ - compatible: "allwinner,sun4i-a10-lradc-keys" ++ - reg: mmio address range of the chip ++ - interrupts: interrupt to which the chip is connected ++ - vref-supply: powersupply for the lradc reference voltage ++ ++Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys": ++ ++Required subnode-properties: ++ - label: Descriptive name of the key. ++ - linux,code: Keycode to emit. ++ - channel: Channel this key is attached to, mut be 0 or 1. ++ - voltage: Voltage in µV at lradc input when this key is pressed. ++ ++Example: ++ ++#include ++ ++ lradc: lradc@01c22800 { ++ compatible = "allwinner,sun4i-a10-lradc-keys"; ++ reg = <0x01c22800 0x100>; ++ interrupts = <31>; ++ vref-supply = <®_vcc3v0>; ++ ++ button@191 { ++ label = "Volume Up"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <191274>; ++ }; ++ ++ button@392 { ++ label = "Volume Down"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <392644>; ++ }; ++ ++ button@601 { ++ label = "Menu"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <601151>; ++ }; ++ ++ button@795 { ++ label = "Enter"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <795090>; ++ }; ++ ++ button@987 { ++ label = "Home"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <987387>; ++ }; ++ }; +diff --git a/MAINTAINERS b/MAINTAINERS +index a20df9b..73d1aef 100644 +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -8932,6 +8932,13 @@ F: arch/m68k/sun3*/ + F: arch/m68k/include/asm/sun3* + F: drivers/net/ethernet/i825xx/sun3* + ++SUN4I LOW RES ADC ATTACHED TABLET KEYS DRIVER ++M: Hans de Goede ++L: linux-input@vger.kernel.org ++S: Maintained ++F: Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt ++F: drivers/input/keyboard/sun4i-lradc-keys.c ++ + SUNDANCE NETWORK DRIVER + M: Denis Kirjanov + L: netdev@vger.kernel.org +diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig +index a3958c6..2d11b44 100644 +--- a/drivers/input/keyboard/Kconfig ++++ b/drivers/input/keyboard/Kconfig +@@ -567,6 +567,16 @@ config KEYBOARD_STMPE + To compile this driver as a module, choose M here: the module will be + called stmpe-keypad. + ++config KEYBOARD_SUN4I_LRADC ++ tristate "Allwinner sun4i low res adc attached tablet keys support" ++ depends on ARCH_SUNXI ++ help ++ This selects support for the Allwinner low res adc attached tablet ++ keys found on Allwinner sunxi SoCs. ++ ++ To compile this driver as a module, choose M here: the ++ module will be called sun4i-lradc-keys. ++ + config KEYBOARD_DAVINCI + tristate "TI DaVinci Key Scan" + depends on ARCH_DAVINCI_DM365 +diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile +index 0a33456..a35269a 100644 +--- a/drivers/input/keyboard/Makefile ++++ b/drivers/input/keyboard/Makefile +@@ -53,6 +53,7 @@ obj-$(CONFIG_KEYBOARD_SPEAR) += spear-keyboard.o + obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o + obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o + obj-$(CONFIG_KEYBOARD_ST_KEYSCAN) += st-keyscan.o ++obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o + obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o + obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o + obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o +diff --git a/drivers/input/keyboard/sun4i-lradc-keys.c b/drivers/input/keyboard/sun4i-lradc-keys.c +new file mode 100644 +index 0000000..f11f002 +--- /dev/null ++++ b/drivers/input/keyboard/sun4i-lradc-keys.c +@@ -0,0 +1,258 @@ ++/* ++ * Allwinner sun4i low res adc attached tablet keys driver ++ * ++ * Copyright (C) 2014 Hans de Goede ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++/* ++ * Allwinnner sunxi SoCs have a lradc which is specifically designed to have ++ * various (tablet) keys (ie home, back, search, etc). attached to it using ++ * a resistor network. This driver is for the keys on such boards. ++ * ++ * There are 2 channels, currently this driver only supports channel 0 since ++ * there are no boards known to use channel 1. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define LRADC_CTRL 0x00 ++#define LRADC_INTC 0x04 ++#define LRADC_INTS 0x08 ++#define LRADC_DATA0 0x0c ++#define LRADC_DATA1 0x10 ++ ++/* LRADC_CTRL bits */ ++#define FIRST_CONVERT_DLY(x) ((x) << 24) /* 8 bits */ ++#define CHAN_SELECT(x) ((x) << 22) /* 2 bits */ ++#define CONTINUE_TIME_SEL(x) ((x) << 16) /* 4 bits */ ++#define KEY_MODE_SEL(x) ((x) << 12) /* 2 bits */ ++#define LEVELA_B_CNT(x) ((x) << 8) /* 4 bits */ ++#define HOLD_EN(x) ((x) << 6) ++#define LEVELB_VOL(x) ((x) << 4) /* 2 bits */ ++#define SAMPLE_RATE(x) ((x) << 2) /* 2 bits */ ++#define ENABLE(x) ((x) << 0) ++ ++/* LRADC_INTC and LRADC_INTS bits */ ++#define CHAN1_KEYUP_IRQ BIT(12) ++#define CHAN1_ALRDY_HOLD_IRQ BIT(11) ++#define CHAN1_HOLD_IRQ BIT(10) ++#define CHAN1_KEYDOWN_IRQ BIT(9) ++#define CHAN1_DATA_IRQ BIT(8) ++#define CHAN0_KEYUP_IRQ BIT(4) ++#define CHAN0_ALRDY_HOLD_IRQ BIT(3) ++#define CHAN0_HOLD_IRQ BIT(2) ++#define CHAN0_KEYDOWN_IRQ BIT(1) ++#define CHAN0_DATA_IRQ BIT(0) ++ ++struct sun4i_lradc_keymap { ++ u32 voltage; ++ u32 keycode; ++}; ++ ++struct sun4i_lradc_data { ++ struct device *dev; ++ struct input_dev *input; ++ void __iomem *base; ++ struct regulator *vref_supply; ++ struct sun4i_lradc_keymap *chan0_map; ++ u32 chan0_map_count; ++ u32 chan0_keycode; ++ u32 vref; ++}; ++ ++static irqreturn_t sun4i_lradc_irq(int irq, void *dev_id) ++{ ++ struct sun4i_lradc_data *lradc = dev_id; ++ u32 i, ints, val, voltage, diff, keycode = 0, closest = 0xffffffff; ++ ++ ints = readl(lradc->base + LRADC_INTS); ++ ++ /* ++ * lradc supports only one keypress at a time, release does not give ++ * any info as to which key was released, so we cache the keycode. ++ */ ++ if ((ints & CHAN0_KEYDOWN_IRQ) && lradc->chan0_keycode == 0) { ++ val = readl(lradc->base + LRADC_DATA0) & 0x3f; ++ voltage = val * lradc->vref / 63; ++ ++ for (i = 0; i < lradc->chan0_map_count; i++) { ++ diff = abs(lradc->chan0_map[i].voltage - voltage); ++ if (diff < closest) { ++ closest = diff; ++ keycode = lradc->chan0_map[i].keycode; ++ } ++ } ++ ++ lradc->chan0_keycode = keycode; ++ input_report_key(lradc->input, lradc->chan0_keycode, 1); ++ } ++ ++ if (ints & CHAN0_KEYUP_IRQ) { ++ input_report_key(lradc->input, lradc->chan0_keycode, 0); ++ lradc->chan0_keycode = 0; ++ } ++ ++ input_sync(lradc->input); ++ ++ writel(ints, lradc->base + LRADC_INTS); ++ ++ return IRQ_HANDLED; ++} ++ ++static int sun4i_lradc_open(struct input_dev *dev) ++{ ++ struct sun4i_lradc_data *lradc = input_get_drvdata(dev); ++ int ret; ++ ++ ret = regulator_enable(lradc->vref_supply); ++ if (ret) ++ return ret; ++ ++ /* lradc Vref internally is divided by 2/3 */ ++ lradc->vref = regulator_get_voltage(lradc->vref_supply) * 2 / 3; ++ ++ /* ++ * Set sample time to 4 ms / 250 Hz. Wait 2 * 4 ms for key to ++ * stabilize on press, wait (1 + 1) * 4 ms for key release ++ */ ++ writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | ++ SAMPLE_RATE(0) | ENABLE(1), lradc->base + LRADC_CTRL); ++ ++ writel(CHAN0_KEYUP_IRQ | CHAN0_KEYDOWN_IRQ, lradc->base + LRADC_INTC); ++ ++ return 0; ++} ++ ++static void sun4i_lradc_close(struct input_dev *dev) ++{ ++ struct sun4i_lradc_data *lradc = input_get_drvdata(dev); ++ ++ /* Disable lradc, leave other settings unchanged */ ++ writel(FIRST_CONVERT_DLY(2) | LEVELA_B_CNT(1) | HOLD_EN(1) | ++ SAMPLE_RATE(2), lradc->base + LRADC_CTRL); ++ writel(0, lradc->base + LRADC_INTC); ++ ++ regulator_disable(lradc->vref_supply); ++} ++ ++static int sun4i_lradc_probe(struct platform_device *pdev) ++{ ++ struct sun4i_lradc_data *lradc; ++ struct device *dev = &pdev->dev; ++ struct device_node *pp, *np = dev->of_node; ++ u32 channel; ++ int i, ret; ++ ++ lradc = devm_kzalloc(dev, sizeof(struct sun4i_lradc_data), GFP_KERNEL); ++ if (!lradc) ++ return -ENOMEM; ++ ++ lradc->chan0_map_count = of_get_child_count(np); ++ lradc->chan0_map = devm_kmalloc(dev, lradc->chan0_map_count * ++ sizeof(struct sun4i_lradc_keymap), GFP_KERNEL); ++ if (!lradc->chan0_map) ++ return -ENOMEM; ++ ++ i = 0; ++ for_each_child_of_node(np, pp) { ++ struct sun4i_lradc_keymap *map = &lradc->chan0_map[i]; ++ ++ ret = of_property_read_u32(pp, "channel", &channel); ++ if (ret || channel != 0) { ++ dev_err(dev, "%s: Inval channel prop\n", pp->name); ++ return -EINVAL; ++ } ++ ++ ret = of_property_read_u32(pp, "voltage", &map->voltage); ++ if (ret) { ++ dev_err(dev, "%s: Inval voltage prop\n", pp->name); ++ return -EINVAL; ++ } ++ ++ ret = of_property_read_u32(pp, "linux,code", &map->keycode); ++ if (ret) { ++ dev_err(dev, "%s: Inval linux,code prop\n", pp->name); ++ return -EINVAL; ++ } ++ ++ i++; ++ } ++ ++ lradc->vref_supply = devm_regulator_get(dev, "vref"); ++ if (IS_ERR(lradc->vref_supply)) ++ return PTR_ERR(lradc->vref_supply); ++ ++ lradc->dev = dev; ++ lradc->input = devm_input_allocate_device(dev); ++ if (!lradc->input) ++ return -ENOMEM; ++ ++ lradc->input->name = pdev->name; ++ lradc->input->phys = "sun4i_lradc/input0"; ++ lradc->input->open = sun4i_lradc_open; ++ lradc->input->close = sun4i_lradc_close; ++ lradc->input->id.bustype = BUS_HOST; ++ lradc->input->id.vendor = 0x0001; ++ lradc->input->id.product = 0x0001; ++ lradc->input->id.version = 0x0100; ++ lradc->input->evbit[0] = BIT(EV_SYN) | BIT(EV_KEY); ++ for (i = 0; i < lradc->chan0_map_count; i++) ++ set_bit(lradc->chan0_map[i].keycode, lradc->input->keybit); ++ input_set_drvdata(lradc->input, lradc); ++ ++ lradc->base = devm_ioremap_resource(dev, ++ platform_get_resource(pdev, IORESOURCE_MEM, 0)); ++ if (IS_ERR(lradc->base)) ++ return PTR_ERR(lradc->base); ++ ++ ret = devm_request_irq(dev, platform_get_irq(pdev, 0), sun4i_lradc_irq, ++ 0, "sun4i-a10-lradc-keys", lradc); ++ if (ret) ++ return ret; ++ ++ ret = input_register_device(lradc->input); ++ if (ret) ++ return ret; ++ ++ platform_set_drvdata(pdev, lradc); ++ return 0; ++} ++ ++static const struct of_device_id sun4i_lradc_of_match[] = { ++ { .compatible = "allwinner,sun4i-a10-lradc-keys", }, ++ { /* sentinel */ } ++}; ++MODULE_DEVICE_TABLE(of, sun4i_lradc_of_match); ++ ++static struct platform_driver sun4i_lradc_driver = { ++ .driver = { ++ .name = "sun4i-a10-lradc-keys", ++ .of_match_table = of_match_ptr(sun4i_lradc_of_match), ++ }, ++ .probe = sun4i_lradc_probe, ++}; ++ ++module_platform_driver(sun4i_lradc_driver); ++ ++MODULE_DESCRIPTION("Allwinner sun4i low res adc attached tablet keys driver"); ++MODULE_AUTHOR("Hans de Goede "); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/sunxi/patches-3.18/111-dt-sun4i-add-lradc.patch b/target/linux/sunxi/patches-3.18/111-dt-sun4i-add-lradc.patch new file mode 100644 index 0000000000..0ffe4e8020 --- /dev/null +++ b/target/linux/sunxi/patches-3.18/111-dt-sun4i-add-lradc.patch @@ -0,0 +1,28 @@ +From f39ea4358d2e4b939b8ca55ee344d3c8fdfc0a6a Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Wed, 1 Jan 2014 19:51:36 +0100 +Subject: [PATCH] ARM: dts: sun4i: Add lradc node + +Signed-off-by: Hans de Goede +--- + arch/arm/boot/dts/sun4i-a10.dtsi | 7 +++++++ + 1 file changed, 7 insertions(+) + +diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi +index 380f914..1ef7d57 100644 +--- a/arch/arm/boot/dts/sun4i-a10.dtsi ++++ b/arch/arm/boot/dts/sun4i-a10.dtsi +@@ -669,6 +669,13 @@ + status = "disabled"; + }; + ++ lradc: lradc@01c22800 { ++ compatible = "allwinner,sun4i-a10-lradc-keys"; ++ reg = <0x01c22800 0x100>; ++ interrupts = <31>; ++ status = "disabled"; ++ }; ++ + sid: eeprom@01c23800 { + compatible = "allwinner,sun4i-a10-sid"; + reg = <0x01c23800 0x10>; diff --git a/target/linux/sunxi/patches-3.18/112-dt-sun5i-add-lradc.patch b/target/linux/sunxi/patches-3.18/112-dt-sun5i-add-lradc.patch new file mode 100644 index 0000000000..22dfe51be7 --- /dev/null +++ b/target/linux/sunxi/patches-3.18/112-dt-sun5i-add-lradc.patch @@ -0,0 +1,175 @@ +From 3bf1194692f3a275e0776d3c0b6f17826cc01baa Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Wed, 1 Jan 2014 19:50:33 +0100 +Subject: [PATCH] ARM: dts: sun5i: Add lradc node + +Signed-off-by: Hans de Goede +--- + arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 45 ++++++++++++++++++++++-- + arch/arm/boot/dts/sun5i-a10s.dtsi | 7 ++++ + arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 45 ++++++++++++++++++++++-- + arch/arm/boot/dts/sun5i-a13.dtsi | 7 ++++ + 4 files changed, 100 insertions(+), 4 deletions(-) + +diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +index ea9519d..0b82d20 100644 +--- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts ++++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +@@ -12,8 +12,9 @@ + */ + + /dts-v1/; +-/include/ "sun5i-a10s.dtsi" +-/include/ "sunxi-common-regulators.dtsi" ++#include "sun5i-a10s.dtsi" ++#include "sunxi-common-regulators.dtsi" ++#include + + / { + model = "Olimex A10s-Olinuxino Micro"; +@@ -98,6 +99,46 @@ + }; + }; + ++ lradc: lradc@01c22800 { ++ vref-supply = <®_vcc3v0>; ++ status = "okay"; ++ ++ button@191 { ++ label = "Volume Up"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <191274>; ++ }; ++ ++ button@392 { ++ label = "Volume Down"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <392644>; ++ }; ++ ++ button@601 { ++ label = "Menu"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <601151>; ++ }; ++ ++ button@795 { ++ label = "Enter"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <795090>; ++ }; ++ ++ button@987 { ++ label = "Home"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <987387>; ++ }; ++ }; ++ + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; +diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi +index 531272c..7c6c883 100644 +--- a/arch/arm/boot/dts/sun5i-a10s.dtsi ++++ b/arch/arm/boot/dts/sun5i-a10s.dtsi +@@ -520,6 +520,13 @@ + reg = <0x01c20c90 0x10>; + }; + ++ lradc: lradc@01c22800 { ++ compatible = "allwinner,sun4i-a10-lradc-keys"; ++ reg = <0x01c22800 0x100>; ++ interrupts = <31>; ++ status = "disabled"; ++ }; ++ + sid: eeprom@01c23800 { + compatible = "allwinner,sun4i-a10-sid"; + reg = <0x01c23800 0x10>; +diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +index 429994e..b4ec8eb 100644 +--- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts ++++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +@@ -12,8 +12,9 @@ + */ + + /dts-v1/; +-/include/ "sun5i-a13.dtsi" +-/include/ "sunxi-common-regulators.dtsi" ++#include "sun5i-a13.dtsi" ++#include "sunxi-common-regulators.dtsi" ++#include + + / { + model = "Olimex A13-Olinuxino"; +@@ -66,6 +67,46 @@ + }; + }; + ++ lradc: lradc@01c22800 { ++ vref-supply = <®_vcc3v0>; ++ status = "okay"; ++ ++ button@191 { ++ label = "Volume Up"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <191274>; ++ }; ++ ++ button@392 { ++ label = "Volume Down"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <392644>; ++ }; ++ ++ button@601 { ++ label = "Menu"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <601151>; ++ }; ++ ++ button@795 { ++ label = "Enter"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <795090>; ++ }; ++ ++ button@987 { ++ label = "Home"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <987387>; ++ }; ++ }; ++ + uart1: serial@01c28400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; +diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi +index b131068..aa0482c 100644 +--- a/arch/arm/boot/dts/sun5i-a13.dtsi ++++ b/arch/arm/boot/dts/sun5i-a13.dtsi +@@ -468,6 +468,13 @@ + reg = <0x01c20c90 0x10>; + }; + ++ lradc: lradc@01c22800 { ++ compatible = "allwinner,sun4i-a10-lradc-keys"; ++ reg = <0x01c22800 0x100>; ++ interrupts = <31>; ++ status = "disabled"; ++ }; ++ + sid: eeprom@01c23800 { + compatible = "allwinner,sun4i-a10-sid"; + reg = <0x01c23800 0x10>; diff --git a/target/linux/sunxi/patches-3.18/113-dt-sun7i-add-lradc.patch b/target/linux/sunxi/patches-3.18/113-dt-sun7i-add-lradc.patch new file mode 100644 index 0000000000..50a66b6a81 --- /dev/null +++ b/target/linux/sunxi/patches-3.18/113-dt-sun7i-add-lradc.patch @@ -0,0 +1,106 @@ +From a735a9b354ebc1a17b648ef8c3482c71fdbf40da Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Wed, 1 Jan 2014 20:26:21 +0100 +Subject: [PATCH] ARM: dts: sun7i: Add lradc node + +Signed-off-by: Hans de Goede +--- + arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 59 ++++++++++++++++++++++++- + arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++ + 2 files changed, 64 insertions(+), 2 deletions(-) + +diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +index 9d669cdf..c00badd 100644 +--- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts ++++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +@@ -12,8 +12,9 @@ + */ + + /dts-v1/; +-/include/ "sun7i-a20.dtsi" +-/include/ "sunxi-common-regulators.dtsi" ++#include "sun7i-a20.dtsi" ++#include "sunxi-common-regulators.dtsi" ++#include + + / { + model = "Olimex A20-Olinuxino Micro"; +@@ -100,6 +101,60 @@ + }; + }; + ++ lradc: lradc@01c22800 { ++ vref-supply = <®_vcc3v0>; ++ status = "okay"; ++ ++ button@191 { ++ label = "Volume Up"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <191274>; ++ }; ++ ++ button@392 { ++ label = "Volume Down"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <392644>; ++ }; ++ ++ button@601 { ++ label = "Menu"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <601151>; ++ }; ++ ++ button@795 { ++ label = "Search"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <795090>; ++ }; ++ ++ button@987 { ++ label = "Home"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <987387>; ++ }; ++ ++ button@1184 { ++ label = "Esc"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <1184678>; ++ }; ++ ++ button@1398 { ++ label = "Enter"; ++ linux,code = ; ++ channel = <0>; ++ voltage = <1398804>; ++ }; ++ }; ++ + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; +diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi +index f0a75c6..9174423 100644 +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -911,6 +911,13 @@ + status = "disabled"; + }; + ++ lradc: lradc@01c22800 { ++ compatible = "allwinner,sun4i-a10-lradc-keys"; ++ reg = <0x01c22800 0x100>; ++ interrupts = <0 31 4>; ++ status = "disabled"; ++ }; ++ + sid: eeprom@01c23800 { + compatible = "allwinner,sun7i-a20-sid"; + reg = <0x01c23800 0x200>; diff --git a/target/linux/sunxi/patches-3.18/115-input-sun4i-ts-update-temp-curve.patch b/target/linux/sunxi/patches-3.18/115-input-sun4i-ts-update-temp-curve.patch new file mode 100644 index 0000000000..bff74e468f --- /dev/null +++ b/target/linux/sunxi/patches-3.18/115-input-sun4i-ts-update-temp-curve.patch @@ -0,0 +1,83 @@ +From 2e2493cd07405dfa88e53199b47bdbbb5336fdce Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Mon, 16 Jun 2014 20:01:12 +0200 +Subject: [PATCH] touchscreen: sun4i-ts: A10 (sun4i) has a different + temperature curve + +Testing has revealed that the temperature in the rtp controller of the A10 +(sun4i) SoC has a different curve then on the A13 (sun5i) and later models. + +Add a new sun5i-a13-ts compatible to differentiate the newer models and +set the curve based on the compatible string. + +This fixes the temperature reported on the A10 being much higher then +expected. + +Note the new curve is still not ideal on all A10-s, that seems to have to +do with there being a large spread between different A10-s out there. + +Reported-by: Tong Zhang +Signed-off-by: Hans de Goede +--- + .../devicetree/bindings/input/touchscreen/sun4i.txt | 2 +- + drivers/input/touchscreen/sun4i-ts.c | 13 ++++++++++++- + 2 files changed, 13 insertions(+), 2 deletions(-) + +diff --git a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt +index aef5779..5106709 100644 +--- a/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt ++++ b/Documentation/devicetree/bindings/input/touchscreen/sun4i.txt +@@ -2,7 +2,7 @@ sun4i resistive touchscreen controller + -------------------------------------- + + Required properties: +- - compatible: "allwinner,sun4i-a10-ts" ++ - compatible: "allwinner,sun4i-a10-ts" or "allwinner,sun5i-a13-ts" + - reg: mmio address range of the chip + - interrupts: interrupt to which the chip is connected + +diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c +index 2ba8260..52b7114 100644 +--- a/drivers/input/touchscreen/sun4i-ts.c ++++ b/drivers/input/touchscreen/sun4i-ts.c +@@ -111,6 +111,8 @@ struct sun4i_ts_data { + unsigned int irq; + bool ignore_fifo_data; + int temp_data; ++ int temp_offset; ++ int temp_step; + }; + + static void sun4i_ts_irq_handle_input(struct sun4i_ts_data *ts, u32 reg_val) +@@ -189,7 +191,8 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, + if (ts->temp_data == -1) + return -EAGAIN; + +- return sprintf(buf, "%d\n", (ts->temp_data - 1447) * 100); ++ return sprintf(buf, "%d\n", ++ (ts->temp_data - ts->temp_offset) * ts->temp_step); + } + + static ssize_t show_temp_label(struct device *dev, +@@ -224,6 +227,13 @@ static int sun4i_ts_probe(struct platform_device *pdev) + ts->dev = dev; + ts->ignore_fifo_data = true; + ts->temp_data = -1; ++ if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts")) { ++ ts->temp_offset = 1900; ++ ts->temp_step = 100; ++ } else { ++ ts->temp_offset = 1447; ++ ts->temp_step = 100; ++ } + + ts_attached = of_property_read_bool(np, "allwinner,ts-attached"); + if (ts_attached) { +@@ -318,6 +328,7 @@ static int sun4i_ts_remove(struct platform_device *pdev) + + static const struct of_device_id sun4i_ts_of_match[] = { + { .compatible = "allwinner,sun4i-a10-ts", }, ++ { .compatible = "allwinner,sun5i-a13-ts", }, + { /* sentinel */ } + }; + MODULE_DEVICE_TABLE(of, sun4i_ts_of_match); diff --git a/target/linux/sunxi/patches-3.18/116-dt-sunxi-update-compats-for-tempcurves.patch b/target/linux/sunxi/patches-3.18/116-dt-sunxi-update-compats-for-tempcurves.patch new file mode 100644 index 0000000000..861538fed2 --- /dev/null +++ b/target/linux/sunxi/patches-3.18/116-dt-sunxi-update-compats-for-tempcurves.patch @@ -0,0 +1,57 @@ +From ff774d842a2bf9136b9c7ddd7f5085a9062705ac Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Mon, 16 Jun 2014 20:06:43 +0200 +Subject: [PATCH] ARM: dts: sunxi: Adjust touchscreen compatible for sun5i and + later + +The touchscreen controller in the A13 and later has a different temperature +curve than the one in the original A10, change the compatible for the A13 and +later so that the kernel will use the correct curve. + +Reported-by: Tong Zhang +Signed-off-by: Hans de Goede +--- + arch/arm/boot/dts/sun5i-a10s.dtsi | 2 +- + arch/arm/boot/dts/sun5i-a13.dtsi | 2 +- + arch/arm/boot/dts/sun7i-a20.dtsi | 2 +- + 3 files changed, 3 insertions(+), 3 deletions(-) + +diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi +index 7c6c883..7089284 100644 +--- a/arch/arm/boot/dts/sun5i-a10s.dtsi ++++ b/arch/arm/boot/dts/sun5i-a10s.dtsi +@@ -533,7 +533,7 @@ + }; + + rtp: rtp@01c25000 { +- compatible = "allwinner,sun4i-a10-ts"; ++ compatible = "allwinner,sun5i-a13-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + }; +diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi +index aa0482c..b05ab04 100644 +--- a/arch/arm/boot/dts/sun5i-a13.dtsi ++++ b/arch/arm/boot/dts/sun5i-a13.dtsi +@@ -481,7 +481,7 @@ + }; + + rtp: rtp@01c25000 { +- compatible = "allwinner,sun4i-a10-ts"; ++ compatible = "allwinner,sun5i-a13-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + }; +diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi +index 9174423..81d4e55 100644 +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -924,7 +924,7 @@ + }; + + rtp: rtp@01c25000 { +- compatible = "allwinner,sun4i-a10-ts"; ++ compatible = "allwinner,sun5i-a13-ts"; + reg = <0x01c25000 0x100>; + interrupts = <0 29 4>; + }; diff --git a/target/linux/sunxi/patches-3.18/130-input-add-axp20x-pek.patch b/target/linux/sunxi/patches-3.18/130-input-add-axp20x-pek.patch new file mode 100644 index 0000000000..537ba365f1 --- /dev/null +++ b/target/linux/sunxi/patches-3.18/130-input-add-axp20x-pek.patch @@ -0,0 +1,339 @@ +From 63d559304a15ffead2fa1014b93dbcabf516c257 Mon Sep 17 00:00:00 2001 +From: Carlo Caione +Date: Mon, 19 May 2014 21:47:45 +0200 +Subject: [PATCH] input: misc: Add driver for AXP20x Power Enable Key + +This patch add support for the Power Enable Key found on MFD AXP202 and +AXP209. Besides the basic support for the button, the driver adds two +entries in sysfs to configure the time delay for power on/off. + +Signed-off-by: Carlo Caione +Acked-by: Dmitry Torokhov +--- + drivers/input/misc/Kconfig | 11 ++ + drivers/input/misc/Makefile | 1 + + drivers/input/misc/axp20x-pek.c | 281 ++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 293 insertions(+) + create mode 100644 drivers/input/misc/axp20x-pek.c + +diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig +index 23297ab..a49bcd3 100644 +--- a/drivers/input/misc/Kconfig ++++ b/drivers/input/misc/Kconfig +@@ -404,6 +404,17 @@ config INPUT_RETU_PWRBUTTON + To compile this driver as a module, choose M here. The module will + be called retu-pwrbutton. + ++config INPUT_AXP20X_PEK ++ tristate "X-Powers AXP20X power button driver" ++ depends on MFD_AXP20X ++ help ++ Say Y here if you want to enable power key reporting via the ++ AXP20X PMIC. ++ ++ To compile this driver as a module, choose M here. The module will ++ be called axp20x-pek. ++ ++ + config INPUT_TWL4030_PWRBUTTON + tristate "TWL4030 Power button Driver" + depends on TWL4030_CORE +diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile +index 19c7603..04ea87f 100644 +--- a/drivers/input/misc/Makefile ++++ b/drivers/input/misc/Makefile +@@ -54,6 +54,7 @@ obj-$(CONFIG_INPUT_POWERMATE) += powermate.o + obj-$(CONFIG_INPUT_PWM_BEEPER) += pwm-beeper.o + obj-$(CONFIG_INPUT_RB532_BUTTON) += rb532_button.o + obj-$(CONFIG_INPUT_RETU_PWRBUTTON) += retu-pwrbutton.o ++obj-$(CONFIG_INPUT_AXP20X_PEK) += axp20x-pek.o + obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER) += rotary_encoder.o + obj-$(CONFIG_INPUT_SGI_BTNS) += sgi_btns.o + obj-$(CONFIG_INPUT_SIRFSOC_ONKEY) += sirfsoc-onkey.o +diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c +new file mode 100644 +index 0000000..0fba252 +--- /dev/null ++++ b/drivers/input/misc/axp20x-pek.c +@@ -0,0 +1,281 @@ ++/* ++ * axp20x power button driver. ++ * ++ * Copyright (C) 2013 Carlo Caione ++ * ++ * This file is subject to the terms and conditions of the GNU General ++ * Public License. See the file "COPYING" in the main directory of this ++ * archive for more details. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define AXP20X_PEK_STARTUP_MASK (0xc0) ++#define AXP20X_PEK_SHUTDOWN_MASK (0x03) ++ ++struct axp20x_pek { ++ struct axp20x_dev *axp20x; ++ struct input_dev *input; ++ int irq_dbr; ++ int irq_dbf; ++}; ++ ++struct axp20x_time { ++ unsigned int time; ++ unsigned int idx; ++}; ++ ++static const struct axp20x_time startup_time[] = { ++ { .time = 128, .idx = 0 }, ++ { .time = 1000, .idx = 2 }, ++ { .time = 3000, .idx = 1 }, ++ { .time = 2000, .idx = 3 }, ++}; ++ ++static const struct axp20x_time shutdown_time[] = { ++ { .time = 4000, .idx = 0 }, ++ { .time = 6000, .idx = 1 }, ++ { .time = 8000, .idx = 2 }, ++ { .time = 10000, .idx = 3 }, ++}; ++ ++struct axp20x_pek_ext_attr { ++ const struct axp20x_time *p_time; ++ unsigned int mask; ++}; ++ ++static struct axp20x_pek_ext_attr axp20x_pek_startup_ext_attr = { ++ .p_time = startup_time, ++ .mask = AXP20X_PEK_STARTUP_MASK, ++}; ++ ++static struct axp20x_pek_ext_attr axp20x_pek_shutdown_ext_attr = { ++ .p_time = shutdown_time, ++ .mask = AXP20X_PEK_SHUTDOWN_MASK, ++}; ++ ++static struct axp20x_pek_ext_attr *get_axp_ext_attr(struct device_attribute *attr) ++{ ++ return container_of(attr, struct dev_ext_attribute, attr)->var; ++} ++ ++static ssize_t axp20x_show_ext_attr(struct device *dev, struct device_attribute *attr, ++ char *buf) ++{ ++ struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev); ++ struct axp20x_pek_ext_attr *axp20x_ea = get_axp_ext_attr(attr); ++ unsigned int val; ++ int ret, i; ++ ++ ret = regmap_read(axp20x_pek->axp20x->regmap, AXP20X_PEK_KEY, &val); ++ if (ret != 0) ++ return ret; ++ ++ val &= axp20x_ea->mask; ++ val >>= ffs(axp20x_ea->mask) - 1; ++ ++ for (i = 0; i < 4; i++) ++ if (val == axp20x_ea->p_time[i].idx) ++ val = axp20x_ea->p_time[i].time; ++ ++ return sprintf(buf, "%u\n", val); ++} ++ ++static ssize_t axp20x_store_ext_attr(struct device *dev, struct device_attribute *attr, ++ const char *buf, size_t count) ++{ ++ struct axp20x_pek *axp20x_pek = dev_get_drvdata(dev); ++ struct axp20x_pek_ext_attr *axp20x_ea = get_axp_ext_attr(attr); ++ char val_str[20]; ++ size_t len; ++ int ret, i; ++ unsigned int val, idx = 0; ++ unsigned int best_err = UINT_MAX; ++ ++ val_str[sizeof(val_str) - 1] = '\0'; ++ strncpy(val_str, buf, sizeof(val_str) - 1); ++ len = strlen(val_str); ++ ++ if (len && val_str[len - 1] == '\n') ++ val_str[len - 1] = '\0'; ++ ++ ret = kstrtouint(val_str, 10, &val); ++ if (ret) ++ return ret; ++ ++ for (i = 3; i >= 0; i--) { ++ unsigned int err; ++ ++ err = abs(axp20x_ea->p_time[i].time - val); ++ if (err < best_err) { ++ best_err = err; ++ idx = axp20x_ea->p_time[i].idx; ++ } ++ ++ if (!err) ++ break; ++ } ++ ++ idx <<= ffs(axp20x_ea->mask) - 1; ++ ret = regmap_update_bits(axp20x_pek->axp20x->regmap, ++ AXP20X_PEK_KEY, ++ axp20x_ea->mask, idx); ++ if (ret != 0) ++ return -EINVAL; ++ return count; ++} ++ ++static struct dev_ext_attribute axp20x_dev_attr_startup = { ++ .attr = __ATTR(startup, 0644, axp20x_show_ext_attr, axp20x_store_ext_attr), ++ .var = &axp20x_pek_startup_ext_attr ++}; ++ ++static struct dev_ext_attribute axp20x_dev_attr_shutdown = { ++ .attr = __ATTR(shutdown, 0644, axp20x_show_ext_attr, axp20x_store_ext_attr), ++ .var = &axp20x_pek_shutdown_ext_attr ++}; ++ ++static irqreturn_t axp20x_pek_irq(int irq, void *pwr) ++{ ++ struct input_dev *idev = pwr; ++ struct axp20x_pek *axp20x_pek = input_get_drvdata(idev); ++ ++ if (irq == axp20x_pek->irq_dbr) ++ input_report_key(idev, KEY_POWER, true); ++ else if (irq == axp20x_pek->irq_dbf) ++ input_report_key(idev, KEY_POWER, false); ++ ++ input_sync(idev); ++ ++ return IRQ_HANDLED; ++} ++ ++static int axp20x_pek_probe(struct platform_device *pdev) ++{ ++ struct axp20x_pek *axp20x_pek; ++ struct axp20x_dev *axp20x; ++ struct input_dev *idev; ++ int error; ++ ++ axp20x_pek = devm_kzalloc(&pdev->dev, sizeof(struct axp20x_pek), ++ GFP_KERNEL); ++ if (!axp20x_pek) ++ return -ENOMEM; ++ ++ axp20x_pek->axp20x = dev_get_drvdata(pdev->dev.parent); ++ axp20x = axp20x_pek->axp20x; ++ ++ axp20x_pek->irq_dbr = platform_get_irq_byname(pdev, "PEK_DBR"); ++ if (axp20x_pek->irq_dbr < 0) { ++ dev_err(&pdev->dev, "No IRQ for PEK_DBR, error=%d\n", ++ axp20x_pek->irq_dbr); ++ return axp20x_pek->irq_dbr; ++ } ++ axp20x_pek->irq_dbr = regmap_irq_get_virq(axp20x->regmap_irqc, ++ axp20x_pek->irq_dbr); ++ ++ axp20x_pek->irq_dbf = platform_get_irq_byname(pdev, "PEK_DBF"); ++ if (axp20x_pek->irq_dbf < 0) { ++ dev_err(&pdev->dev, "No IRQ for PEK_DBF, error=%d\n", ++ axp20x_pek->irq_dbf); ++ return axp20x_pek->irq_dbf; ++ } ++ axp20x_pek->irq_dbf = regmap_irq_get_virq(axp20x->regmap_irqc, ++ axp20x_pek->irq_dbf); ++ ++ axp20x_pek->input = devm_input_allocate_device(&pdev->dev); ++ if (!axp20x_pek->input) ++ return -ENOMEM; ++ ++ idev = axp20x_pek->input; ++ ++ idev->name = "axp20x-pek"; ++ idev->phys = "m1kbd/input2"; ++ idev->dev.parent = &pdev->dev; ++ ++ input_set_capability(idev, EV_KEY, KEY_POWER); ++ ++ input_set_drvdata(idev, axp20x_pek); ++ ++ error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbr, ++ axp20x_pek_irq, 0, ++ "axp20x-pek-dbr", idev); ++ if (error < 0) { ++ dev_err(axp20x->dev, "Failed to request dbr IRQ#%d: %d\n", ++ axp20x_pek->irq_dbr, error); ++ ++ return error; ++ } ++ ++ error = devm_request_any_context_irq(&pdev->dev, axp20x_pek->irq_dbf, ++ axp20x_pek_irq, 0, ++ "axp20x-pek-dbf", idev); ++ if (error < 0) { ++ dev_err(axp20x->dev, "Failed to request dbf IRQ#%d: %d\n", ++ axp20x_pek->irq_dbf, error); ++ return error; ++ } ++ ++ error = device_create_file(&pdev->dev, &axp20x_dev_attr_startup.attr); ++ if (error) ++ return error; ++ ++ error = device_create_file(&pdev->dev, &axp20x_dev_attr_shutdown.attr); ++ if (error) ++ goto clear_startup_attr; ++ ++ error = input_register_device(idev); ++ if (error) { ++ dev_err(axp20x->dev, "Can't register input device: %d\n", error); ++ goto clear_attr; ++ } ++ ++ platform_set_drvdata(pdev, axp20x_pek); ++ ++ return 0; ++ ++clear_attr: ++ device_remove_file(&pdev->dev, &axp20x_dev_attr_shutdown.attr); ++ ++clear_startup_attr: ++ device_remove_file(&pdev->dev, &axp20x_dev_attr_startup.attr); ++ ++ return error; ++} ++ ++int axp20x_pek_remove(struct platform_device *pdev) ++{ ++ device_remove_file(&pdev->dev, &axp20x_dev_attr_shutdown.attr); ++ device_remove_file(&pdev->dev, &axp20x_dev_attr_startup.attr); ++ ++ return 0; ++} ++ ++static struct platform_driver axp20x_pek_driver = { ++ .probe = axp20x_pek_probe, ++ .remove = axp20x_pek_remove, ++ .driver = { ++ .name = "axp20x-pek", ++ .owner = THIS_MODULE, ++ }, ++}; ++module_platform_driver(axp20x_pek_driver); ++ ++MODULE_DESCRIPTION("axp20x Power Button"); ++MODULE_AUTHOR("Carlo Caione "); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/sunxi/patches-3.18/135-ahci-fix-threaded-interrupt-setup.patch b/target/linux/sunxi/patches-3.18/135-ahci-fix-threaded-interrupt-setup.patch new file mode 100644 index 0000000000..6d316c2053 --- /dev/null +++ b/target/linux/sunxi/patches-3.18/135-ahci-fix-threaded-interrupt-setup.patch @@ -0,0 +1,97 @@ +From 4bfd40ed0046299e4a5ffba31bfbbcc39cf74e03 Mon Sep 17 00:00:00 2001 +From: Marc Zyngier +Date: Thu, 23 Oct 2014 17:49:30 +0100 +Subject: [PATCH] AHCI: Fix threaded interrupt setup + +Commit 18dcf433f3de (AHCI: Optimize single IRQ interrupt processing) +switched the single IRQ case of the AHCI driver to use threaded +threaded interrupts. + +During this conversion, only the IRQF_SHARED flag was provided. The net +effect of this in the presence of level interrupts is that the +interrupt will not be masked during the execution of the treaded +handler, leading to a screaming interrupt if the thread is not +scheduled quickly enough, specially in error conditions: + +[ 2.728051] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP_PMP +[ 2.735578] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled +[ 2.742792] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode +[ 2.751789] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc +[ 2.761539] scsi host0: ahci_platform +[ 2.765754] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x100 irq 88 +[...] +[ 3.127977] ata1: SATA link down (SStatus 0 SControl 300) +[...] +[ 3.162035] Waiting for root device /dev/sda1... +[ 3.163700] random: nonblocking pool is initialized +[ 3.326593] irq 88: nobody cared (try booting with the "irqpoll" option) +[ 3.333296] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.18.0-rc1+ #3077 +[ 3.339936] [] (unwind_backtrace) from [] (show_stack+0x20/0x24) +[ 3.347681] [] (show_stack) from [] (dump_stack+0x9c/0xd4) +[ 3.354904] [] (dump_stack) from [] (__report_bad_irq+0x38/0xd4) +[ 3.362643] [] (__report_bad_irq) from [] (note_interrupt+0x280/0x2d0) +[ 3.370903] [] (note_interrupt) from [] (handle_irq_event_percpu+0x210/0x27c) +[ 3.379771] [] (handle_irq_event_percpu) from [] (handle_irq_event+0x4c/0x6c) +[ 3.388636] [] (handle_irq_event) from [] (handle_fasteoi_irq+0xbc/0x1a0) +[ 3.397156] [] (handle_fasteoi_irq) from [] (generic_handle_irq+0x3c/0x4c) +[ 3.405764] [] (generic_handle_irq) from [] (__handle_domain_irq+0x6c/0xb4) +[ 3.414456] [] (__handle_domain_irq) from [] (gic_handle_irq+0x34/0x6c) +[ 3.422802] [] (gic_handle_irq) from [] (__irq_svc+0x40/0x74) +[ 3.430274] Exception stack(0xc09c1df8 to 0xc09c1e40) +[ 3.435321] 1de0: 00000001 c0a27ec0 +[ 3.443491] 1e00: 00000000 00000000 c09c0028 0000001e 00000282 00000000 ee00c400 c0a239f8 +[ 3.451660] 1e20: c09c0000 c09c1ea4 c0a27ec0 c09c1e40 00200000 c003c7cc 20000113 ffffffff +[ 3.459835] [] (__irq_svc) from [] (__do_softirq+0xbc/0x34c) +[ 3.467229] [] (__do_softirq) from [] (irq_exit+0xbc/0x104) +[ 3.474536] [] (irq_exit) from [] (__handle_domain_irq+0x70/0xb4) +[ 3.482362] [] (__handle_domain_irq) from [] (gic_handle_x74) +[ 3.498169] Exception stack(0xc09c1f10 to 0xc09c1f58) +[ 3.503216] 1f00: ee7ca310 00000000 00000ab4 c0035560 +[ 3.511386] 1f20: c09c0000 00000000 c0a23f84 c09c8474 c09c84bc c09c0000 c0688bf8 c09c1f64 +[ 3.519554] 1f40: c09c1f68 c09c1f58 c00235d8 c00235dc 60000113 ffffffff +[ 3.526165] [] (__irq_svc) from [] (arch_cpu_idle+0x48/0x4c) +[ 3.533557] [] (arch_cpu_idle) from [] (cpu_startup_entry+0x13c/0x27c) +[ 3.541816] [] (cpu_startup_entry) from [] (rest_init+0x94/0x98) +[ 3.549557] [] (rest_init) from [] (start_kernel+0x3f0/0x3fc) +[ 3.557036] [] (start_kernel) from [<40008084>] (0x40008084) +[ 3.563555] handlers: +[ 3.565830] [] ahci_single_irq_intr threaded [] ahci_thread_fn +[ 3.573415] Disabling IRQ #88 +[ 3.576532] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4050002 action 0xe frozen +[ 3.583977] ata1: irq_stat 0x00400040, connection status changed +[ 3.590006] ata1: SError: { RecovComm PHYRdyChg CommWake DevExch } +[ 3.596209] ata1: hard resetting link +[...] + +Not good. The culprit is a missing IRQF_ONESHOT flag, which addition +solves the problem entierly. The number of interrupts drops radically: + +[Booting Debian Jessie to a prompt] +Before fix: + 88: 3562 0 GIC 88 ahci-sunxi +After fix: + 88: 1992 0 GIC 88 ahci-sunxi + +Tested on a A20 board (ahci-sunxi). + +Cc: Alexander Gordeev +Cc: Tejun Heo +Cc: linux-ide@vger.kernel.org +Signed-off-by: Marc Zyngier +--- + drivers/ata/libahci.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c +index 5eb61c9..49c649f 100644 +--- a/drivers/ata/libahci.c ++++ b/drivers/ata/libahci.c +@@ -2492,7 +2492,7 @@ static int ahci_host_activate_single_irq(struct ata_host *host, int irq, + return rc; + + rc = devm_request_threaded_irq(host->dev, irq, ahci_single_irq_intr, +- ahci_thread_fn, IRQF_SHARED, ++ ahci_thread_fn, IRQF_SHARED | IRQF_ONESHOT, + dev_driver_string(host->dev), host); + if (rc) + return rc; diff --git a/target/linux/sunxi/patches-3.18/150-pwm-add-sunxi-driver.patch b/target/linux/sunxi/patches-3.18/150-pwm-add-sunxi-driver.patch new file mode 100644 index 0000000000..2d467c08de --- /dev/null +++ b/target/linux/sunxi/patches-3.18/150-pwm-add-sunxi-driver.patch @@ -0,0 +1,409 @@ +diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig +index 3865dfb9ed08..424359d3cbb1 100644 +--- a/drivers/pwm/Kconfig ++++ b/drivers/pwm/Kconfig +@@ -262,6 +262,15 @@ config PWM_STI + To compile this driver as a module, choose M here: the module + will be called pwm-sti. + ++config PWM_SUN4I ++ tristate "Allwinner sun4i PWM support" ++ depends on ARCH_SUNXI || COMPILE_TEST ++ help ++ Generic PWM framework driver for Allwinner sun4i and sun7i SoCs. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called pwm-sun4i. ++ + config PWM_TEGRA + tristate "NVIDIA Tegra PWM support" + depends on ARCH_TEGRA +diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile +index c458606c3755..d607804deea1 100644 +--- a/drivers/pwm/Makefile ++++ b/drivers/pwm/Makefile +@@ -24,6 +24,7 @@ obj-$(CONFIG_PWM_ROCKCHIP) += pwm-rockchip.o + obj-$(CONFIG_PWM_SAMSUNG) += pwm-samsung.o + obj-$(CONFIG_PWM_SPEAR) += pwm-spear.o + obj-$(CONFIG_PWM_STI) += pwm-sti.o ++obj-$(CONFIG_PWM_SUN4I) += pwm-sun4i.o + obj-$(CONFIG_PWM_TEGRA) += pwm-tegra.o + obj-$(CONFIG_PWM_TIECAP) += pwm-tiecap.o + obj-$(CONFIG_PWM_TIEHRPWM) += pwm-tiehrpwm.o +diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c +new file mode 100644 +index 000000000000..918f8ee79b51 +--- /dev/null ++++ b/drivers/pwm/pwm-sun4i.c +@@ -0,0 +1,371 @@ ++/* ++ * Driver for Allwinner sun4i Pulse Width Modulation Controller ++ * ++ * Copyright (C) 2014 Alexandre Belloni ++ * ++ * Licensed under GPLv2. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define PWM_CTRL_REG 0x0 ++ ++#define PWM_CH_PRD_BASE 0x4 ++#define PWM_CH_PRD_OFFSET 0x4 ++#define PWM_CH_PRD(ch) (PWM_CH_PRD_BASE + PWM_CH_PRD_OFFSET * (ch)) ++ ++#define PWMCH_OFFSET 15 ++#define PWM_PRESCAL_MASK GENMASK(3, 0) ++#define PWM_PRESCAL_OFF 0 ++#define PWM_EN BIT(4) ++#define PWM_ACT_STATE BIT(5) ++#define PWM_CLK_GATING BIT(6) ++#define PWM_MODE BIT(7) ++#define PWM_PULSE BIT(8) ++#define PWM_BYPASS BIT(9) ++ ++#define PWM_RDY_BASE 28 ++#define PWM_RDY_OFFSET 1 ++#define PWM_RDY(ch) BIT(PWM_RDY_BASE + PWM_RDY_OFFSET * (ch)) ++ ++#define PWM_PRD(prd) (((prd) - 1) << 16) ++#define PWM_PRD_MASK GENMASK(15, 0) ++ ++#define PWM_DTY_MASK GENMASK(15, 0) ++ ++#define BIT_CH(bit, chan) ((bit) << ((chan) * PWMCH_OFFSET)) ++ ++static const u32 prescaler_table[] = { ++ 120, ++ 180, ++ 240, ++ 360, ++ 480, ++ 0, ++ 0, ++ 0, ++ 12000, ++ 24000, ++ 36000, ++ 48000, ++ 72000, ++ 0, ++ 0, ++ 0, /* Actually 1 but tested separately */ ++}; ++ ++struct sun4i_pwm_data { ++ bool has_prescaler_bypass; ++ bool has_rdy; ++}; ++ ++struct sun4i_pwm_chip { ++ struct pwm_chip chip; ++ struct clk *clk; ++ void __iomem *base; ++ struct mutex ctrl_lock; ++ const struct sun4i_pwm_data *data; ++}; ++ ++static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip) ++{ ++ return container_of(chip, struct sun4i_pwm_chip, chip); ++} ++ ++static inline u32 sun4i_pwm_readl(struct sun4i_pwm_chip *chip, ++ unsigned long offset) ++{ ++ return readl(chip->base + offset); ++} ++ ++static inline void sun4i_pwm_writel(struct sun4i_pwm_chip *chip, ++ u32 val, unsigned long offset) ++{ ++ writel(val, chip->base + offset); ++} ++ ++static int sun4i_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, ++ int duty_ns, int period_ns) ++{ ++ struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); ++ u32 clk_rate, prd, dty, val, clk_gate; ++ u64 div = 0; ++ unsigned int prescaler = 0; ++ int err; ++ ++ clk_rate = clk_get_rate(sun4i_pwm->clk); ++ ++ if (sun4i_pwm->data->has_prescaler_bypass) { ++ /* First, test without any prescaler when available */ ++ prescaler = PWM_PRESCAL_MASK; ++ /* ++ * When not using any prescaler, the clock period in nanoseconds ++ * is not an integer so round it half up instead of ++ * truncating to get less surprising values. ++ */ ++ div = clk_rate * (u64)period_ns + NSEC_PER_SEC/2; ++ do_div(div, NSEC_PER_SEC); ++ if (div - 1 > PWM_PRD_MASK) ++ prescaler = 0; ++ } ++ ++ if (prescaler == 0) { ++ /* Go up from the first divider */ ++ for (prescaler = 0; prescaler < PWM_PRESCAL_MASK; prescaler++) { ++ if (!prescaler_table[prescaler]) ++ continue; ++ div = clk_rate / prescaler_table[prescaler]; ++ div = div * (u64)period_ns; ++ do_div(div, NSEC_PER_SEC); ++ if (div - 1 <= PWM_PRD_MASK) ++ break; ++ } ++ ++ if (div - 1 > PWM_PRD_MASK) { ++ dev_err(chip->dev, "period exceeds the maximum value\n"); ++ return -EINVAL; ++ } ++ } ++ ++ prd = div; ++ div *= duty_ns; ++ do_div(div, period_ns); ++ dty = div; ++ ++ err = clk_prepare_enable(sun4i_pwm->clk); ++ if (err) { ++ dev_err(chip->dev, "failed to enable PWM clock\n"); ++ return err; ++ } ++ ++ mutex_lock(&sun4i_pwm->ctrl_lock); ++ val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); ++ ++ if (sun4i_pwm->data->has_rdy && (val & PWM_RDY(pwm->hwpwm))) { ++ mutex_unlock(&sun4i_pwm->ctrl_lock); ++ clk_disable_unprepare(sun4i_pwm->clk); ++ return -EBUSY; ++ } ++ ++ clk_gate = val & BIT_CH(PWM_CLK_GATING, pwm->hwpwm); ++ if (clk_gate) { ++ val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); ++ sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); ++ } ++ ++ val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); ++ val &= ~BIT_CH(PWM_PRESCAL_MASK, pwm->hwpwm); ++ val |= BIT_CH(prescaler, pwm->hwpwm); ++ sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); ++ ++ val = (dty & PWM_DTY_MASK) | PWM_PRD(prd); ++ sun4i_pwm_writel(sun4i_pwm, val, PWM_CH_PRD(pwm->hwpwm)); ++ ++ if (clk_gate) { ++ val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); ++ val |= clk_gate; ++ sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); ++ } ++ ++ mutex_unlock(&sun4i_pwm->ctrl_lock); ++ clk_disable_unprepare(sun4i_pwm->clk); ++ ++ return 0; ++} ++ ++static int sun4i_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm, ++ enum pwm_polarity polarity) ++{ ++ struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); ++ u32 val; ++ int ret; ++ ++ ret = clk_prepare_enable(sun4i_pwm->clk); ++ if (ret) { ++ dev_err(chip->dev, "failed to enable PWM clock\n"); ++ return ret; ++ } ++ ++ mutex_lock(&sun4i_pwm->ctrl_lock); ++ val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); ++ ++ if (polarity != PWM_POLARITY_NORMAL) ++ val &= ~BIT_CH(PWM_ACT_STATE, pwm->hwpwm); ++ else ++ val |= BIT_CH(PWM_ACT_STATE, pwm->hwpwm); ++ ++ sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); ++ ++ mutex_unlock(&sun4i_pwm->ctrl_lock); ++ clk_disable_unprepare(sun4i_pwm->clk); ++ ++ return 0; ++} ++ ++static int sun4i_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) ++{ ++ struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); ++ u32 val; ++ int ret; ++ ++ ret = clk_prepare_enable(sun4i_pwm->clk); ++ if (ret) { ++ dev_err(chip->dev, "failed to enable PWM clock\n"); ++ return ret; ++ } ++ ++ mutex_lock(&sun4i_pwm->ctrl_lock); ++ val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); ++ val |= BIT_CH(PWM_EN, pwm->hwpwm); ++ val |= BIT_CH(PWM_CLK_GATING, pwm->hwpwm); ++ sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); ++ mutex_unlock(&sun4i_pwm->ctrl_lock); ++ ++ return 0; ++} ++ ++static void sun4i_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) ++{ ++ struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip); ++ u32 val; ++ ++ mutex_lock(&sun4i_pwm->ctrl_lock); ++ val = sun4i_pwm_readl(sun4i_pwm, PWM_CTRL_REG); ++ val &= ~BIT_CH(PWM_EN, pwm->hwpwm); ++ val &= ~BIT_CH(PWM_CLK_GATING, pwm->hwpwm); ++ sun4i_pwm_writel(sun4i_pwm, val, PWM_CTRL_REG); ++ mutex_unlock(&sun4i_pwm->ctrl_lock); ++ ++ clk_disable_unprepare(sun4i_pwm->clk); ++} ++ ++static const struct pwm_ops sun4i_pwm_ops = { ++ .config = sun4i_pwm_config, ++ .set_polarity = sun4i_pwm_set_polarity, ++ .enable = sun4i_pwm_enable, ++ .disable = sun4i_pwm_disable, ++ .owner = THIS_MODULE, ++}; ++ ++static const struct sun4i_pwm_data sun4i_pwm_data_a10 = { ++ .has_prescaler_bypass = false, ++ .has_rdy = false, ++}; ++ ++static const struct sun4i_pwm_data sun4i_pwm_data_a20 = { ++ .has_prescaler_bypass = true, ++ .has_rdy = true, ++}; ++ ++static const struct of_device_id sun4i_pwm_dt_ids[] = { ++ { ++ .compatible = "allwinner,sun4i-a10-pwm", ++ .data = &sun4i_pwm_data_a10, ++ }, { ++ .compatible = "allwinner,sun7i-a20-pwm", ++ .data = &sun4i_pwm_data_a20, ++ }, { ++ /* sentinel */ ++ }, ++}; ++MODULE_DEVICE_TABLE(of, sun4i_pwm_dt_ids); ++ ++static int sun4i_pwm_probe(struct platform_device *pdev) ++{ ++ struct sun4i_pwm_chip *pwm; ++ struct resource *res; ++ u32 val; ++ int i, ret; ++ const struct of_device_id *match; ++ ++ match = of_match_device(sun4i_pwm_dt_ids, &pdev->dev); ++ ++ pwm = devm_kzalloc(&pdev->dev, sizeof(*pwm), GFP_KERNEL); ++ if (!pwm) ++ return -ENOMEM; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ pwm->base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(pwm->base)) ++ return PTR_ERR(pwm->base); ++ ++ pwm->clk = devm_clk_get(&pdev->dev, NULL); ++ if (IS_ERR(pwm->clk)) ++ return PTR_ERR(pwm->clk); ++ ++ pwm->chip.dev = &pdev->dev; ++ pwm->chip.ops = &sun4i_pwm_ops; ++ pwm->chip.base = -1; ++ pwm->chip.npwm = 2; ++ pwm->chip.can_sleep = true; ++ pwm->chip.of_xlate = of_pwm_xlate_with_flags; ++ pwm->chip.of_pwm_n_cells = 3; ++ pwm->data = match->data; ++ ++ mutex_init(&pwm->ctrl_lock); ++ ++ ret = pwmchip_add(&pwm->chip); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret); ++ goto error; ++ } ++ ++ platform_set_drvdata(pdev, pwm); ++ ++ ret = clk_prepare_enable(pwm->clk); ++ if (ret) { ++ dev_err(&pdev->dev, "failed to enable PWM clock\n"); ++ goto clk_error; ++ } ++ ++ val = sun4i_pwm_readl(pwm, PWM_CTRL_REG); ++ for (i = 0; i < pwm->chip.npwm; i++) { ++ if (!(val & BIT_CH(PWM_ACT_STATE, i))) ++ pwm->chip.pwms[i].polarity = PWM_POLARITY_INVERSED; ++ } ++ clk_disable_unprepare(pwm->clk); ++ ++ return 0; ++ ++clk_error: ++ pwmchip_remove(&pwm->chip); ++ ++error: ++ mutex_destroy(&pwm->ctrl_lock); ++ return ret; ++} ++ ++static int sun4i_pwm_remove(struct platform_device *pdev) ++{ ++ struct sun4i_pwm_chip *pwm = platform_get_drvdata(pdev); ++ ++ mutex_destroy(&pwm->ctrl_lock); ++ ++ return pwmchip_remove(&pwm->chip); ++} ++ ++static struct platform_driver sun4i_pwm_driver = { ++ .driver = { ++ .name = "sun4i-pwm", ++ .of_match_table = sun4i_pwm_dt_ids, ++ }, ++ .probe = sun4i_pwm_probe, ++ .remove = sun4i_pwm_remove, ++}; ++module_platform_driver(sun4i_pwm_driver); ++ ++MODULE_ALIAS("platform:sun4i-pwm"); ++MODULE_AUTHOR("Alexandre Belloni "); ++MODULE_DESCRIPTION("Allwinner sun4i PWM driver"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/sunxi/patches-3.18/200-mmc-add-sdio-function-subnode.patch b/target/linux/sunxi/patches-3.18/200-mmc-add-sdio-function-subnode.patch new file mode 100644 index 0000000000..6427df5cc1 --- /dev/null +++ b/target/linux/sunxi/patches-3.18/200-mmc-add-sdio-function-subnode.patch @@ -0,0 +1,148 @@ +From 8c2057afe84c074ef7cd3ee2ec8e9bed835b9e93 Mon Sep 17 00:00:00 2001 +From: Sascha Hauer +Date: Wed, 21 May 2014 19:50:04 +0200 +Subject: [PATCH] mmc: Add SDIO function devicetree subnode parsing + +This adds SDIO devicetree subnode parsing to the mmc core. While +SDIO devices are runtime probable they sometimes need nonprobable +additional information on embedded systems, like an additional gpio +interrupt or a clock. This patch makes it possible to supply this +information from the devicetree. SDIO drivers will find a pointer +to the devicenode in their devices of_node pointer. + +Signed-off-by: Sascha Hauer +[hdegoede@redhat.com: Misc. cleanups] +Signed-off-by: Hans de Goede +--- + drivers/mmc/core/bus.c | 4 ++++ + drivers/mmc/core/core.c | 28 ++++++++++++++++++++++++++++ + drivers/mmc/core/core.h | 3 +++ + drivers/mmc/core/sdio_bus.c | 11 +++++++++++ + 4 files changed, 46 insertions(+) + +diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c +index 8a1f124..7868565 100644 +--- a/drivers/mmc/core/bus.c ++++ b/drivers/mmc/core/bus.c +@@ -16,6 +16,7 @@ + #include + #include + #include ++#include + #include + + #include +@@ -352,6 +353,8 @@ int mmc_add_card(struct mmc_card *card) + #endif + mmc_init_context_info(card->host); + ++ card->dev.of_node = mmc_of_find_child_device(card->host, 0); ++ + ret = device_add(&card->dev); + if (ret) + return ret; +@@ -380,6 +383,7 @@ void mmc_remove_card(struct mmc_card *card) + mmc_hostname(card->host), card->rca); + } + device_del(&card->dev); ++ of_node_put(card->dev.of_node); + } + + put_device(&card->dev); +diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c +index f26a5f1..7f7f66c 100644 +--- a/drivers/mmc/core/core.c ++++ b/drivers/mmc/core/core.c +@@ -1205,6 +1205,34 @@ EXPORT_SYMBOL(mmc_of_parse_voltage); + + #endif /* CONFIG_OF */ + ++static int mmc_of_get_func_num(struct device_node *node) ++{ ++ u32 reg; ++ int ret; ++ ++ ret = of_property_read_u32(node, "reg", ®); ++ if (ret < 0) ++ return ret; ++ ++ return reg; ++} ++ ++struct device_node *mmc_of_find_child_device(struct mmc_host *host, ++ unsigned func_num) ++{ ++ struct device_node *node; ++ ++ if (!host->parent || !host->parent->of_node) ++ return NULL; ++ ++ for_each_child_of_node(host->parent->of_node, node) { ++ if (mmc_of_get_func_num(node) == func_num) ++ return node; ++ } ++ ++ return NULL; ++} ++ + #ifdef CONFIG_REGULATOR + + /** +diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h +index 443a5846..f712f6e 100644 +--- a/drivers/mmc/core/core.h ++++ b/drivers/mmc/core/core.h +@@ -32,6 +32,9 @@ struct mmc_bus_ops { + void mmc_attach_bus(struct mmc_host *host, const struct mmc_bus_ops *ops); + void mmc_detach_bus(struct mmc_host *host); + ++struct device_node *mmc_of_find_child_device(struct mmc_host *host, ++ unsigned func_num); ++ + void mmc_init_erase(struct mmc_card *card); + + void mmc_set_chip_select(struct mmc_host *host, int mode); +diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c +index 6da97b1..f63223a 100644 +--- a/drivers/mmc/core/sdio_bus.c ++++ b/drivers/mmc/core/sdio_bus.c +@@ -22,7 +22,9 @@ + #include + #include + #include ++#include + ++#include "core.h" + #include "sdio_cis.h" + #include "sdio_bus.h" + +@@ -303,6 +305,13 @@ static void sdio_acpi_set_handle(struct sdio_func *func) + static inline void sdio_acpi_set_handle(struct sdio_func *func) {} + #endif + ++static void sdio_set_of_node(struct sdio_func *func) ++{ ++ struct mmc_host *host = func->card->host; ++ ++ func->dev.of_node = mmc_of_find_child_device(host, func->num); ++} ++ + /* + * Register a new SDIO function with the driver model. + */ +@@ -312,6 +321,7 @@ int sdio_add_func(struct sdio_func *func) + + dev_set_name(&func->dev, "%s:%d", mmc_card_id(func->card), func->num); + ++ sdio_set_of_node(func); + sdio_acpi_set_handle(func); + ret = device_add(&func->dev); + if (ret == 0) { +@@ -335,6 +345,7 @@ void sdio_remove_func(struct sdio_func *func) + + dev_pm_domain_detach(&func->dev, false); + device_del(&func->dev); ++ of_node_put(func->dev.of_node); + put_device(&func->dev); + } + diff --git a/target/linux/sunxi/patches-3.18/201-dt-sun7i-add-oob-irq-to-bcm-sdio-wifi.patch b/target/linux/sunxi/patches-3.18/201-dt-sun7i-add-oob-irq-to-bcm-sdio-wifi.patch new file mode 100644 index 0000000000..c6790b7432 --- /dev/null +++ b/target/linux/sunxi/patches-3.18/201-dt-sun7i-add-oob-irq-to-bcm-sdio-wifi.patch @@ -0,0 +1,68 @@ +From e4127db9b980a5684c537d9010ed2aaa05a1e79a Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Sat, 24 May 2014 20:53:49 +0200 +Subject: [PATCH] ARM: dts: sun7i: Add OOB irq support to boards with broadcom + sdio wifi + +Signed-off-by: Hans de Goede +--- + arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 11 +++++++++++ + arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts | 11 +++++++++++ + 2 files changed, 22 insertions(+) + +diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +index a6c1a3c..f9ab5d4 100644 +--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts ++++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +@@ -31,12 +31,23 @@ + }; + + mmc3: mmc@01c12000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; ++ ++ brcmf: bcrmf@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ interrupt-parent = <&pio>; ++ interrupts = <10 8>; /* PH10 / EINT10 */ ++ interrupt-names = "host-wake"; ++ }; + }; + + usbphy: phy@01c13400 { +diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +index 6a67712d..f620aea 100644 +--- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts ++++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +@@ -29,12 +29,23 @@ + }; + + mmc3: mmc@01c12000 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; ++ ++ brcmf: bcrmf@1 { ++ reg = <1>; ++ compatible = "brcm,bcm4329-fmac"; ++ interrupt-parent = <&pio>; ++ interrupts = <10 8>; /* PH10 / EINT10 */ ++ interrupt-names = "host-wake"; ++ }; + }; + + usbphy: phy@01c13400 { diff --git a/target/linux/sunxi/patches-3.18/202-dt-sun7i-add-bluetooth-to-cubietruck.patch b/target/linux/sunxi/patches-3.18/202-dt-sun7i-add-bluetooth-to-cubietruck.patch new file mode 100644 index 0000000000..f819849448 --- /dev/null +++ b/target/linux/sunxi/patches-3.18/202-dt-sun7i-add-bluetooth-to-cubietruck.patch @@ -0,0 +1,75 @@ +From c6e2b7dad39a7887f935458d1c8de84db06243e1 Mon Sep 17 00:00:00 2001 +From: Chen-Yu Tsai +Date: Thu, 26 Dec 2013 17:15:47 +0800 +Subject: [PATCH] ARM: dts: sun7i: add bluetooth module to CubieTruck DTS + +The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The +Bluetooth part is a BCM20710 IC connected to UART2 in the A20 +SoC. The IC also takes a 32.768 KHz low power clock input, a power +enable signal and a wake signal via GPIO. + +The Bluetooth module supports out-of-band interrupt signaling via +GPIO, but this is not supported in this patch. +--- + arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 36 ++++++++++++++++++++++++++++++ + 1 file changed, 36 insertions(+) + +diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +index f9ab5d4..69d8c4c 100644 +--- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts ++++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +@@ -103,6 +103,20 @@ + allwinner,drive = <0>; + allwinner,pull = <0>; + }; ++ ++ bt_pwr_pin: bt_pwr_pin@0 { ++ allwinner,pins = "PH18"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ bt_wake_pin: bt_wake_pin@0 { ++ allwinner,pins = "PH24"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; + }; + + pwm: pwm@01c20e00 { +@@ -123,6 +137,12 @@ + status = "okay"; + }; + ++ uart2: serial@01c28800 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart2_pins_a>; ++ status = "okay"; ++ }; ++ + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; +@@ -214,4 +234,20 @@ + enable-active-high; + gpio = <&pio 7 9 0>; + }; ++ ++ rfkill-switches { ++ compatible = "simple-bus"; ++ pinctrl-names = "default"; ++ ++ rfkill_bt { ++ compatible = "rfkill-gpio"; ++ pinctrl-0 = <&bt_pwr_pin>, <&clk_out_a_pins_a>; ++ rfkill-name = "bt"; ++ rfkill-type = <2>; ++ bt_shutdown-gpios = <0>, <&pio 7 18 0>; /* PH18 */ ++ bt_reset-gpios = <&pio 7 24 0>; /* PH24 */ ++ clocks = <&clk_out_a>; ++ clock-frequency = <32768>; ++ }; ++ }; + }; diff --git a/target/linux/sunxi/patches-3.18/270-dt-sun7i-add-ss-to-a20.patch b/target/linux/sunxi/patches-3.18/270-dt-sun7i-add-ss-to-a20.patch new file mode 100644 index 0000000000..11a6ed03f5 --- /dev/null +++ b/target/linux/sunxi/patches-3.18/270-dt-sun7i-add-ss-to-a20.patch @@ -0,0 +1,17 @@ +--- a/arch/arm/boot/dts/sun7i-a20.dtsi ++++ b/arch/arm/boot/dts/sun7i-a20.dtsi +@@ -529,6 +529,14 @@ + status = "disabled"; + }; + ++ crypto: crypto-engine@01c15000 { ++ compatible = "allwinner,sun7i-a20-crypto"; ++ reg = <0x01c15000 0x1000>; ++ interrupts = <0 86 4>; ++ clocks = <&ahb_gates 5>, <&ss_clk>; ++ clock-names = "ahb", "mod"; ++ }; ++ + spi2: spi@01c17000 { + compatible = "allwinner,sun4i-a10-spi"; + reg = <0x01c17000 0x1000>; diff --git a/target/linux/sunxi/patches-3.18/271-crypto-add-ss.patch b/target/linux/sunxi/patches-3.18/271-crypto-add-ss.patch new file mode 100644 index 0000000000..090624de96 --- /dev/null +++ b/target/linux/sunxi/patches-3.18/271-crypto-add-ss.patch @@ -0,0 +1,1512 @@ +diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig +index 2fb0fdf..9ba9759 100644 +--- a/drivers/crypto/Kconfig ++++ b/drivers/crypto/Kconfig +@@ -436,4 +436,21 @@ config CRYPTO_DEV_QCE + hardware. To compile this driver as a module, choose M here. The + module will be called qcrypto. + ++config CRYPTO_DEV_SUNXI_SS ++ tristate "Support for Allwinner Security System cryptographic accelerator" ++ depends on ARCH_SUNXI ++ select CRYPTO_MD5 ++ select CRYPTO_SHA1 ++ select CRYPTO_AES ++ select CRYPTO_DES ++ select CRYPTO_BLKCIPHER ++ help ++ Some Allwinner SoC have a crypto accelerator named ++ Security System. Select this if you want to use it. ++ The Security System handle AES/DES/3DES ciphers in CBC mode ++ and SHA1 and MD5 hash algorithms. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called sunxi-ss. ++ + endif # CRYPTO_HW +diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile +index 3924f93..856545c 100644 +--- a/drivers/crypto/Makefile ++++ b/drivers/crypto/Makefile +@@ -25,3 +25,4 @@ obj-$(CONFIG_CRYPTO_DEV_TALITOS) += talitos.o + obj-$(CONFIG_CRYPTO_DEV_UX500) += ux500/ + obj-$(CONFIG_CRYPTO_DEV_QAT) += qat/ + obj-$(CONFIG_CRYPTO_DEV_QCE) += qce/ ++obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss/ +diff --git a/drivers/crypto/sunxi-ss/Makefile b/drivers/crypto/sunxi-ss/Makefile +new file mode 100644 +index 0000000..8bb287d +--- /dev/null ++++ b/drivers/crypto/sunxi-ss/Makefile +@@ -0,0 +1,2 @@ ++obj-$(CONFIG_CRYPTO_DEV_SUNXI_SS) += sunxi-ss.o ++sunxi-ss-y += sunxi-ss-core.o sunxi-ss-hash.o sunxi-ss-cipher.o +diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c b/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c +new file mode 100644 +index 0000000..8d0416e +--- /dev/null ++++ b/drivers/crypto/sunxi-ss/sunxi-ss-cipher.c +@@ -0,0 +1,489 @@ ++/* ++ * sunxi-ss-cipher.c - hardware cryptographic accelerator for Allwinner A20 SoC ++ * ++ * Copyright (C) 2013-2014 Corentin LABBE ++ * ++ * This file add support for AES cipher with 128,192,256 bits ++ * keysize in CBC mode. ++ * Add support also for DES and 3DES in CBC mode. ++ * ++ * You could find the datasheet in Documentation/arm/sunxi/README ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++#include "sunxi-ss.h" ++ ++extern struct sunxi_ss_ctx *ss; ++ ++static int sunxi_ss_cipher(struct ablkcipher_request *areq, u32 mode) ++{ ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ const char *cipher_type; ++ ++ if (areq->nbytes == 0) ++ return 0; ++ ++ if (areq->info == NULL) { ++ dev_err(ss->dev, "ERROR: Empty IV\n"); ++ return -EINVAL; ++ } ++ ++ if (areq->src == NULL || areq->dst == NULL) { ++ dev_err(ss->dev, "ERROR: Some SGs are NULL\n"); ++ return -EINVAL; ++ } ++ ++ cipher_type = crypto_tfm_alg_name(crypto_ablkcipher_tfm(tfm)); ++ ++ if (strcmp("cbc(aes)", cipher_type) == 0) { ++ mode |= SS_OP_AES | SS_CBC | SS_ENABLED | op->keymode; ++ return sunxi_ss_aes_poll(areq, mode); ++ } ++ ++ if (strcmp("cbc(des)", cipher_type) == 0) { ++ mode |= SS_OP_DES | SS_CBC | SS_ENABLED | op->keymode; ++ return sunxi_ss_des_poll(areq, mode); ++ } ++ ++ if (strcmp("cbc(des3_ede)", cipher_type) == 0) { ++ mode |= SS_OP_3DES | SS_CBC | SS_ENABLED | op->keymode; ++ return sunxi_ss_des_poll(areq, mode); ++ } ++ ++ dev_err(ss->dev, "ERROR: Cipher %s not handled\n", cipher_type); ++ return -EINVAL; ++} ++ ++int sunxi_ss_cipher_encrypt(struct ablkcipher_request *areq) ++{ ++ return sunxi_ss_cipher(areq, SS_ENCRYPTION); ++} ++ ++int sunxi_ss_cipher_decrypt(struct ablkcipher_request *areq) ++{ ++ return sunxi_ss_cipher(areq, SS_DECRYPTION); ++} ++ ++int sunxi_ss_cipher_init(struct crypto_tfm *tfm) ++{ ++ struct sunxi_tfm_ctx *op = crypto_tfm_ctx(tfm); ++ ++ memset(op, 0, sizeof(struct sunxi_tfm_ctx)); ++ return 0; ++} ++ ++/* ++ * Optimized function for the case where we have only one SG, ++ * so we can use kmap_atomic ++ */ ++static int sunxi_ss_aes_poll_atomic(struct ablkcipher_request *areq) ++{ ++ u32 spaces; ++ struct scatterlist *in_sg = areq->src; ++ struct scatterlist *out_sg = areq->dst; ++ void *src_addr; ++ void *dst_addr; ++ unsigned int ileft = areq->nbytes; ++ unsigned int oleft = areq->nbytes; ++ unsigned int todo; ++ u32 *src32; ++ u32 *dst32; ++ u32 rx_cnt = 32; ++ u32 tx_cnt = 0; ++ int i; ++ ++ src_addr = kmap_atomic(sg_page(in_sg)) + in_sg->offset; ++ if (src_addr == NULL) { ++ dev_err(ss->dev, "kmap_atomic error for src SG\n"); ++ writel(0, ss->base + SS_CTL); ++ mutex_unlock(&ss->lock); ++ return -EINVAL; ++ } ++ ++ dst_addr = kmap_atomic(sg_page(out_sg)) + out_sg->offset; ++ if (dst_addr == NULL) { ++ dev_err(ss->dev, "kmap_atomic error for dst SG\n"); ++ writel(0, ss->base + SS_CTL); ++ kunmap_atomic(src_addr); ++ mutex_unlock(&ss->lock); ++ return -EINVAL; ++ } ++ ++ src32 = (u32 *)src_addr; ++ dst32 = (u32 *)dst_addr; ++ ileft = areq->nbytes / 4; ++ oleft = areq->nbytes / 4; ++ i = 0; ++ do { ++ if (ileft > 0 && rx_cnt > 0) { ++ todo = min(rx_cnt, ileft); ++ ileft -= todo; ++ do { ++ writel_relaxed(*src32++, ++ ss->base + ++ SS_RXFIFO); ++ todo--; ++ } while (todo > 0); ++ } ++ if (tx_cnt > 0) { ++ todo = min(tx_cnt, oleft); ++ oleft -= todo; ++ do { ++ *dst32++ = readl_relaxed(ss->base + ++ SS_TXFIFO); ++ todo--; ++ } while (todo > 0); ++ } ++ spaces = readl_relaxed(ss->base + SS_FCSR); ++ rx_cnt = SS_RXFIFO_SPACES(spaces); ++ tx_cnt = SS_TXFIFO_SPACES(spaces); ++ } while (oleft > 0); ++ writel(0, ss->base + SS_CTL); ++ kunmap_atomic(src_addr); ++ kunmap_atomic(dst_addr); ++ mutex_unlock(&ss->lock); ++ return 0; ++} ++ ++int sunxi_ss_aes_poll(struct ablkcipher_request *areq, u32 mode) ++{ ++ u32 spaces; ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm); ++ /* when activating SS, the default FIFO space is 32 */ ++ u32 rx_cnt = 32; ++ u32 tx_cnt = 0; ++ u32 v; ++ int i; ++ struct scatterlist *in_sg = areq->src; ++ struct scatterlist *out_sg = areq->dst; ++ void *src_addr; ++ void *dst_addr; ++ unsigned int ileft = areq->nbytes; ++ unsigned int oleft = areq->nbytes; ++ unsigned int sgileft = areq->src->length; ++ unsigned int sgoleft = areq->dst->length; ++ unsigned int todo; ++ u32 *src32; ++ u32 *dst32; ++ ++ mutex_lock(&ss->lock); ++ ++ for (i = 0; i < op->keylen; i += 4) ++ writel(*(op->key + i/4), ss->base + SS_KEY0 + i); ++ ++ if (areq->info != NULL) { ++ for (i = 0; i < 4 && i < ivsize / 4; i++) { ++ v = *(u32 *)(areq->info + i * 4); ++ writel(v, ss->base + SS_IV0 + i * 4); ++ } ++ } ++ writel(mode, ss->base + SS_CTL); ++ ++ /* If we have only one SG, we can use kmap_atomic */ ++ if (sg_next(in_sg) == NULL && sg_next(out_sg) == NULL) ++ return sunxi_ss_aes_poll_atomic(areq); ++ ++ /* ++ * If we have more than one SG, we cannot use kmap_atomic since ++ * we hold the mapping too long ++ */ ++ src_addr = kmap(sg_page(in_sg)) + in_sg->offset; ++ if (src_addr == NULL) { ++ dev_err(ss->dev, "KMAP error for src SG\n"); ++ mutex_unlock(&ss->lock); ++ return -EINVAL; ++ } ++ dst_addr = kmap(sg_page(out_sg)) + out_sg->offset; ++ if (dst_addr == NULL) { ++ kunmap(sg_page(in_sg)); ++ dev_err(ss->dev, "KMAP error for dst SG\n"); ++ mutex_unlock(&ss->lock); ++ return -EINVAL; ++ } ++ src32 = (u32 *)src_addr; ++ dst32 = (u32 *)dst_addr; ++ ileft = areq->nbytes / 4; ++ oleft = areq->nbytes / 4; ++ sgileft = in_sg->length / 4; ++ sgoleft = out_sg->length / 4; ++ do { ++ spaces = readl_relaxed(ss->base + SS_FCSR); ++ rx_cnt = SS_RXFIFO_SPACES(spaces); ++ tx_cnt = SS_TXFIFO_SPACES(spaces); ++ todo = min3(rx_cnt, ileft, sgileft); ++ if (todo > 0) { ++ ileft -= todo; ++ sgileft -= todo; ++ } ++ while (todo > 0) { ++ writel_relaxed(*src32++, ss->base + SS_RXFIFO); ++ todo--; ++ } ++ if (in_sg != NULL && sgileft == 0 && ileft > 0) { ++ kunmap(sg_page(in_sg)); ++ in_sg = sg_next(in_sg); ++ while (in_sg != NULL && in_sg->length == 0) ++ in_sg = sg_next(in_sg); ++ if (in_sg != NULL && ileft > 0) { ++ src_addr = kmap(sg_page(in_sg)) + in_sg->offset; ++ if (src_addr == NULL) { ++ dev_err(ss->dev, "ERROR: KMAP for src SG\n"); ++ mutex_unlock(&ss->lock); ++ return -EINVAL; ++ } ++ src32 = src_addr; ++ sgileft = in_sg->length / 4; ++ } ++ } ++ /* do not test oleft since when oleft == 0 we have finished */ ++ todo = min3(tx_cnt, oleft, sgoleft); ++ if (todo > 0) { ++ oleft -= todo; ++ sgoleft -= todo; ++ } ++ while (todo > 0) { ++ *dst32++ = readl_relaxed(ss->base + SS_TXFIFO); ++ todo--; ++ } ++ if (out_sg != NULL && sgoleft == 0 && oleft >= 0) { ++ kunmap(sg_page(out_sg)); ++ out_sg = sg_next(out_sg); ++ while (out_sg != NULL && out_sg->length == 0) ++ out_sg = sg_next(out_sg); ++ if (out_sg != NULL && oleft > 0) { ++ dst_addr = kmap(sg_page(out_sg)) + ++ out_sg->offset; ++ if (dst_addr == NULL) { ++ dev_err(ss->dev, "KMAP error\n"); ++ mutex_unlock(&ss->lock); ++ return -EINVAL; ++ } ++ dst32 = dst_addr; ++ sgoleft = out_sg->length / 4; ++ } ++ } ++ } while (oleft > 0); ++ ++ writel_relaxed(0, ss->base + SS_CTL); ++ mutex_unlock(&ss->lock); ++ return 0; ++} ++ ++/* ++ * Pure CPU way of doing DES/3DES with SS ++ * Since DES and 3DES SGs could be smaller than 4 bytes, I use sg_copy_to_buffer ++ * for "linearize" them. ++ * The problem with that is that I alloc (2 x areq->nbytes) for buf_in/buf_out ++ * TODO: change this system, I need to support other mode than CBC where len ++ * is not a multiple of 4 and the hack of linearize use too much memory ++ * SGsrc -> buf_in -> SS -> buf_out -> SGdst ++ */ ++int sunxi_ss_des_poll(struct ablkcipher_request *areq, u32 mode) ++{ ++ u32 value, spaces; ++ size_t nb_in_sg_tx, nb_in_sg_rx; ++ size_t ir, it; ++ struct crypto_ablkcipher *tfm = crypto_ablkcipher_reqtfm(areq); ++ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ unsigned int ivsize = crypto_ablkcipher_ivsize(tfm); ++ u32 tx_cnt = 0; ++ u32 rx_cnt = 0; ++ u32 v; ++ int i; ++ int no_chunk = 1; ++ struct scatterlist *in_sg = areq->src; ++ struct scatterlist *out_sg = areq->dst; ++ ++ /* ++ * if we have only SGs with size multiple of 4, ++ * we can use the SS AES function ++ */ ++ while (in_sg != NULL && no_chunk == 1) { ++ if ((in_sg->length % 4) != 0) ++ no_chunk = 0; ++ in_sg = sg_next(in_sg); ++ } ++ while (out_sg != NULL && no_chunk == 1) { ++ if ((out_sg->length % 4) != 0) ++ no_chunk = 0; ++ out_sg = sg_next(out_sg); ++ } ++ ++ if (no_chunk == 1) ++ return sunxi_ss_aes_poll(areq, mode); ++ ++ in_sg = areq->src; ++ out_sg = areq->dst; ++ ++ nb_in_sg_rx = sg_nents(in_sg); ++ nb_in_sg_tx = sg_nents(out_sg); ++ ++ /* ++ * buf_in and buf_out are allocated only one time ++ * then we keep the buffer until driver end ++ * the allocation can only grow more ++ * we do not reduce it for simplification ++ */ ++ mutex_lock(&ss->bufin_lock); ++ if (ss->buf_in == NULL) { ++ ss->buf_in = kmalloc(areq->nbytes, GFP_KERNEL); ++ ss->buf_in_size = areq->nbytes; ++ } else { ++ if (areq->nbytes > ss->buf_in_size) { ++ kfree(ss->buf_in); ++ ss->buf_in = kmalloc(areq->nbytes, GFP_KERNEL); ++ ss->buf_in_size = areq->nbytes; ++ } ++ } ++ if (ss->buf_in == NULL) { ++ ss->buf_in_size = 0; ++ mutex_unlock(&ss->bufin_lock); ++ dev_err(ss->dev, "Unable to allocate pages.\n"); ++ return -ENOMEM; ++ } ++ mutex_lock(&ss->bufout_lock); ++ if (ss->buf_out == NULL) { ++ ss->buf_out = kmalloc(areq->nbytes, GFP_KERNEL); ++ if (ss->buf_out == NULL) { ++ ss->buf_out_size = 0; ++ mutex_unlock(&ss->bufin_lock); ++ mutex_unlock(&ss->bufout_lock); ++ dev_err(ss->dev, "Unable to allocate pages.\n"); ++ return -ENOMEM; ++ } ++ ss->buf_out_size = areq->nbytes; ++ } else { ++ if (areq->nbytes > ss->buf_out_size) { ++ kfree(ss->buf_out); ++ ss->buf_out = kmalloc(areq->nbytes, GFP_KERNEL); ++ if (ss->buf_out == NULL) { ++ ss->buf_out_size = 0; ++ mutex_unlock(&ss->bufin_lock); ++ mutex_unlock(&ss->bufout_lock); ++ dev_err(ss->dev, "Unable to allocate pages.\n"); ++ return -ENOMEM; ++ } ++ ss->buf_out_size = areq->nbytes; ++ } ++ } ++ ++ sg_copy_to_buffer(areq->src, nb_in_sg_rx, ss->buf_in, areq->nbytes); ++ ++ ir = 0; ++ it = 0; ++ mutex_lock(&ss->lock); ++ ++ for (i = 0; i < op->keylen; i += 4) ++ writel(*(op->key + i/4), ss->base + SS_KEY0 + i); ++ if (areq->info != NULL) { ++ for (i = 0; i < 4 && i < ivsize / 4; i++) { ++ v = *(u32 *)(areq->info + i * 4); ++ writel(v, ss->base + SS_IV0 + i * 4); ++ } ++ } ++ writel(mode, ss->base + SS_CTL); ++ ++ do { ++ if (rx_cnt == 0 || tx_cnt == 0) { ++ spaces = readl(ss->base + SS_FCSR); ++ rx_cnt = SS_RXFIFO_SPACES(spaces); ++ tx_cnt = SS_TXFIFO_SPACES(spaces); ++ } ++ if (rx_cnt > 0 && ir < areq->nbytes) { ++ do { ++ value = *(u32 *)(ss->buf_in + ir); ++ writel(value, ss->base + SS_RXFIFO); ++ ir += 4; ++ rx_cnt--; ++ } while (rx_cnt > 0 && ir < areq->nbytes); ++ } ++ if (tx_cnt > 0 && it < areq->nbytes) { ++ do { ++ value = readl(ss->base + SS_TXFIFO); ++ *(u32 *)(ss->buf_out + it) = value; ++ it += 4; ++ tx_cnt--; ++ } while (tx_cnt > 0 && it < areq->nbytes); ++ } ++ if (ir == areq->nbytes) { ++ mutex_unlock(&ss->bufin_lock); ++ ir++; ++ } ++ } while (it < areq->nbytes); ++ ++ writel(0, ss->base + SS_CTL); ++ mutex_unlock(&ss->lock); ++ ++ /* ++ * a simple optimization, since we dont need the hardware for this copy ++ * we release the lock and do the copy. With that we gain 5/10% perf ++ */ ++ sg_copy_from_buffer(areq->dst, nb_in_sg_tx, ss->buf_out, areq->nbytes); ++ ++ mutex_unlock(&ss->bufout_lock); ++ return 0; ++} ++ ++/* check and set the AES key, prepare the mode to be used */ ++int sunxi_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key, ++ unsigned int keylen) ++{ ++ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ ++ switch (keylen) { ++ case 128 / 8: ++ op->keymode = SS_AES_128BITS; ++ break; ++ case 192 / 8: ++ op->keymode = SS_AES_192BITS; ++ break; ++ case 256 / 8: ++ op->keymode = SS_AES_256BITS; ++ break; ++ default: ++ dev_err(ss->dev, "ERROR: Invalid keylen %u\n", keylen); ++ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); ++ return -EINVAL; ++ } ++ op->keylen = keylen; ++ memcpy(op->key, key, keylen); ++ return 0; ++} ++ ++/* check and set the DES key, prepare the mode to be used */ ++int sunxi_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key, ++ unsigned int keylen) ++{ ++ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ ++ if (keylen != DES_KEY_SIZE) { ++ dev_err(ss->dev, "Invalid keylen %u\n", keylen); ++ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); ++ return -EINVAL; ++ } ++ op->keylen = keylen; ++ memcpy(op->key, key, keylen); ++ return 0; ++} ++ ++/* check and set the 3DES key, prepare the mode to be used */ ++int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key, ++ unsigned int keylen) ++{ ++ struct sunxi_tfm_ctx *op = crypto_ablkcipher_ctx(tfm); ++ ++ if (keylen != 3 * DES_KEY_SIZE) { ++ dev_err(ss->dev, "Invalid keylen %u\n", keylen); ++ crypto_ablkcipher_set_flags(tfm, CRYPTO_TFM_RES_BAD_KEY_LEN); ++ return -EINVAL; ++ } ++ op->keylen = keylen; ++ memcpy(op->key, key, keylen); ++ return 0; ++} +diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-core.c b/drivers/crypto/sunxi-ss/sunxi-ss-core.c +new file mode 100644 +index 0000000..e66d7e2 +--- /dev/null ++++ b/drivers/crypto/sunxi-ss/sunxi-ss-core.c +@@ -0,0 +1,318 @@ ++/* ++ * sunxi-ss-core.c - hardware cryptographic accelerator for Allwinner A20 SoC ++ * ++ * Copyright (C) 2013-2014 Corentin LABBE ++ * ++ * Core file which registers crypto algorithms supported by the SS. ++ * ++ * You could find a link for the datasheet in Documentation/arm/sunxi/README ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "sunxi-ss.h" ++ ++struct sunxi_ss_ctx *ss; ++ ++/* ++ * General notes for whole driver: ++ * ++ * After each request the device must be disabled with a write of 0 in SS_CTL ++ * ++ * For performance reason, we use writel_relaxed/read_relaxed for all ++ * operations on RX and TX FIFO and also SS_FCSR. ++ * Excepts for the last write on TX FIFO. ++ * For all other registers, we use writel/readl. ++ * See http://permalink.gmane.org/gmane.linux.ports.arm.kernel/117644 ++ * and http://permalink.gmane.org/gmane.linux.ports.arm.kernel/117640 ++ */ ++ ++static struct ahash_alg sunxi_md5_alg = { ++ .init = sunxi_hash_init, ++ .update = sunxi_hash_update, ++ .final = sunxi_hash_final, ++ .finup = sunxi_hash_finup, ++ .digest = sunxi_hash_digest, ++ .halg = { ++ .digestsize = MD5_DIGEST_SIZE, ++ .base = { ++ .cra_name = "md5", ++ .cra_driver_name = "md5-sunxi-ss", ++ .cra_priority = 300, ++ .cra_alignmask = 3, ++ .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC, ++ .cra_blocksize = MD5_HMAC_BLOCK_SIZE, ++ .cra_ctxsize = sizeof(struct sunxi_req_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_type = &crypto_ahash_type, ++ .cra_init = sunxi_hash_crainit ++ } ++ } ++}; ++ ++static struct ahash_alg sunxi_sha1_alg = { ++ .init = sunxi_hash_init, ++ .update = sunxi_hash_update, ++ .final = sunxi_hash_final, ++ .finup = sunxi_hash_finup, ++ .digest = sunxi_hash_digest, ++ .halg = { ++ .digestsize = SHA1_DIGEST_SIZE, ++ .base = { ++ .cra_name = "sha1", ++ .cra_driver_name = "sha1-sunxi-ss", ++ .cra_priority = 300, ++ .cra_alignmask = 3, ++ .cra_flags = CRYPTO_ALG_TYPE_AHASH | CRYPTO_ALG_ASYNC, ++ .cra_blocksize = SHA1_BLOCK_SIZE, ++ .cra_ctxsize = sizeof(struct sunxi_req_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_type = &crypto_ahash_type, ++ .cra_init = sunxi_hash_crainit ++ } ++ } ++}; ++ ++static struct crypto_alg sunxi_cipher_algs[] = { ++{ ++ .cra_name = "cbc(aes)", ++ .cra_driver_name = "cbc-aes-sunxi-ss", ++ .cra_priority = 300, ++ .cra_blocksize = AES_BLOCK_SIZE, ++ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .cra_ctxsize = sizeof(struct sunxi_tfm_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_alignmask = 3, ++ .cra_type = &crypto_ablkcipher_type, ++ .cra_init = sunxi_ss_cipher_init, ++ .cra_u = { ++ .ablkcipher = { ++ .min_keysize = AES_MIN_KEY_SIZE, ++ .max_keysize = AES_MAX_KEY_SIZE, ++ .ivsize = AES_BLOCK_SIZE, ++ .setkey = sunxi_ss_aes_setkey, ++ .encrypt = sunxi_ss_cipher_encrypt, ++ .decrypt = sunxi_ss_cipher_decrypt, ++ } ++ } ++}, { ++ .cra_name = "cbc(des)", ++ .cra_driver_name = "cbc-des-sunxi-ss", ++ .cra_priority = 300, ++ .cra_blocksize = DES_BLOCK_SIZE, ++ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .cra_ctxsize = sizeof(struct sunxi_req_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_alignmask = 3, ++ .cra_type = &crypto_ablkcipher_type, ++ .cra_init = sunxi_ss_cipher_init, ++ .cra_u.ablkcipher = { ++ .min_keysize = DES_KEY_SIZE, ++ .max_keysize = DES_KEY_SIZE, ++ .ivsize = DES_BLOCK_SIZE, ++ .setkey = sunxi_ss_des_setkey, ++ .encrypt = sunxi_ss_cipher_encrypt, ++ .decrypt = sunxi_ss_cipher_decrypt, ++ } ++}, { ++ .cra_name = "cbc(des3_ede)", ++ .cra_driver_name = "cbc-des3-sunxi-ss", ++ .cra_priority = 300, ++ .cra_blocksize = DES3_EDE_BLOCK_SIZE, ++ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER, ++ .cra_ctxsize = sizeof(struct sunxi_req_ctx), ++ .cra_module = THIS_MODULE, ++ .cra_alignmask = 3, ++ .cra_type = &crypto_ablkcipher_type, ++ .cra_init = sunxi_ss_cipher_init, ++ .cra_u.ablkcipher = { ++ .min_keysize = DES3_EDE_KEY_SIZE, ++ .max_keysize = DES3_EDE_KEY_SIZE, ++ .ivsize = DES3_EDE_BLOCK_SIZE, ++ .setkey = sunxi_ss_des3_setkey, ++ .encrypt = sunxi_ss_cipher_encrypt, ++ .decrypt = sunxi_ss_cipher_decrypt, ++ } ++} ++}; ++ ++static int sunxi_ss_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ u32 v; ++ int err; ++ unsigned long cr; ++ const unsigned long cr_ahb = 24 * 1000 * 1000; ++ const unsigned long cr_mod = 150 * 1000 * 1000; ++ ++ if (!pdev->dev.of_node) ++ return -ENODEV; ++ ++ ss = devm_kzalloc(&pdev->dev, sizeof(*ss), GFP_KERNEL); ++ if (ss == NULL) ++ return -ENOMEM; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ ss->base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(ss->base)) { ++ dev_err(&pdev->dev, "Cannot request MMIO\n"); ++ return PTR_ERR(ss->base); ++ } ++ ++ ss->ssclk = devm_clk_get(&pdev->dev, "mod"); ++ if (IS_ERR(ss->ssclk)) { ++ err = PTR_ERR(ss->ssclk); ++ dev_err(&pdev->dev, "Cannot get SS clock err=%d\n", err); ++ return err; ++ } ++ dev_dbg(&pdev->dev, "clock ss acquired\n"); ++ ++ ss->busclk = devm_clk_get(&pdev->dev, "ahb"); ++ if (IS_ERR(ss->busclk)) { ++ err = PTR_ERR(ss->busclk); ++ dev_err(&pdev->dev, "Cannot get AHB SS clock err=%d\n", err); ++ return err; ++ } ++ dev_dbg(&pdev->dev, "clock ahb_ss acquired\n"); ++ ++ /* Enable both clocks */ ++ err = clk_prepare_enable(ss->busclk); ++ if (err != 0) { ++ dev_err(&pdev->dev, "Cannot prepare_enable busclk\n"); ++ return err; ++ } ++ err = clk_prepare_enable(ss->ssclk); ++ if (err != 0) { ++ dev_err(&pdev->dev, "Cannot prepare_enable ssclk\n"); ++ clk_disable_unprepare(ss->busclk); ++ return err; ++ } ++ ++ /* ++ * Check that clock have the correct rates gived in the datasheet ++ * Try to set the clock to the maximum allowed ++ */ ++ err = clk_set_rate(ss->ssclk, cr_mod); ++ if (err != 0) { ++ dev_err(&pdev->dev, "Cannot set clock rate to ssclk\n"); ++ clk_disable_unprepare(ss->ssclk); ++ clk_disable_unprepare(ss->busclk); ++ return err; ++ } ++ ++ cr = clk_get_rate(ss->busclk); ++ if (cr >= cr_ahb) ++ dev_dbg(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n", ++ cr, cr / 1000000, cr_ahb); ++ else ++ dev_warn(&pdev->dev, "Clock bus %lu (%lu MHz) (must be >= %lu)\n", ++ cr, cr / 1000000, cr_ahb); ++ ++ cr = clk_get_rate(ss->ssclk); ++ if (cr <= cr_mod) ++ if (cr < cr_mod) ++ dev_info(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n", ++ cr, cr / 1000000, cr_mod); ++ else ++ dev_dbg(&pdev->dev, "Clock ss %lu (%lu MHz) (must be <= %lu)\n", ++ cr, cr / 1000000, cr_mod); ++ else ++ dev_warn(&pdev->dev, "Clock ss is at %lu (%lu MHz) (must be <= %lu)\n", ++ cr, cr / 1000000, cr_mod); ++ ++ /* ++ * Datasheet named it "Die Bonding ID" ++ * I expect to be a sort of Security System Revision number. ++ * Since the A80 seems to have an other version of SS ++ * this info could be useful ++ */ ++ writel(SS_ENABLED, ss->base + SS_CTL); ++ v = readl(ss->base + SS_CTL); ++ v >>= 16; ++ v &= 0x07; ++ dev_info(&pdev->dev, "Die ID %d\n", v); ++ writel(0, ss->base + SS_CTL); ++ ++ ss->dev = &pdev->dev; ++ ++ mutex_init(&ss->lock); ++ mutex_init(&ss->bufin_lock); ++ mutex_init(&ss->bufout_lock); ++ ++ err = crypto_register_ahash(&sunxi_md5_alg); ++ if (err) ++ goto error_md5; ++ err = crypto_register_ahash(&sunxi_sha1_alg); ++ if (err) ++ goto error_sha1; ++ err = crypto_register_algs(sunxi_cipher_algs, ++ ARRAY_SIZE(sunxi_cipher_algs)); ++ if (err) ++ goto error_ciphers; ++ ++ return 0; ++error_ciphers: ++ crypto_unregister_ahash(&sunxi_sha1_alg); ++error_sha1: ++ crypto_unregister_ahash(&sunxi_md5_alg); ++error_md5: ++ clk_disable_unprepare(ss->ssclk); ++ clk_disable_unprepare(ss->busclk); ++ return err; ++} ++ ++static int __exit sunxi_ss_remove(struct platform_device *pdev) ++{ ++ if (!pdev->dev.of_node) ++ return 0; ++ ++ crypto_unregister_ahash(&sunxi_md5_alg); ++ crypto_unregister_ahash(&sunxi_sha1_alg); ++ crypto_unregister_algs(sunxi_cipher_algs, ++ ARRAY_SIZE(sunxi_cipher_algs)); ++ ++ if (ss->buf_in != NULL) ++ kfree(ss->buf_in); ++ if (ss->buf_out != NULL) ++ kfree(ss->buf_out); ++ ++ writel(0, ss->base + SS_CTL); ++ clk_disable_unprepare(ss->busclk); ++ clk_disable_unprepare(ss->ssclk); ++ return 0; ++} ++ ++static const struct of_device_id a20ss_crypto_of_match_table[] = { ++ { .compatible = "allwinner,sun7i-a20-crypto" }, ++ {} ++}; ++MODULE_DEVICE_TABLE(of, a20ss_crypto_of_match_table); ++ ++static struct platform_driver sunxi_ss_driver = { ++ .probe = sunxi_ss_probe, ++ .remove = __exit_p(sunxi_ss_remove), ++ .driver = { ++ .owner = THIS_MODULE, ++ .name = "sunxi-ss", ++ .of_match_table = a20ss_crypto_of_match_table, ++ }, ++}; ++ ++module_platform_driver(sunxi_ss_driver); ++ ++MODULE_DESCRIPTION("Allwinner Security System cryptographic accelerator"); ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Corentin LABBE "); +diff --git a/drivers/crypto/sunxi-ss/sunxi-ss-hash.c b/drivers/crypto/sunxi-ss/sunxi-ss-hash.c +new file mode 100644 +index 0000000..ec8758f +--- /dev/null ++++ b/drivers/crypto/sunxi-ss/sunxi-ss-hash.c +@@ -0,0 +1,445 @@ ++/* ++ * sunxi-ss-hash.c - hardware cryptographic accelerator for Allwinner A20 SoC ++ * ++ * Copyright (C) 2013-2014 Corentin LABBE ++ * ++ * This file add support for MD5 and SHA1. ++ * ++ * You could find the datasheet in Documentation/arm/sunxi/README ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ */ ++#include "sunxi-ss.h" ++ ++/* This is a totaly arbitrary value */ ++#define SS_TIMEOUT 100 ++ ++extern struct sunxi_ss_ctx *ss; ++ ++int sunxi_hash_crainit(struct crypto_tfm *tfm) ++{ ++ crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), ++ sizeof(struct sunxi_req_ctx)); ++ return 0; ++} ++ ++/* sunxi_hash_init: initialize request context */ ++int sunxi_hash_init(struct ahash_request *areq) ++{ ++ const char *hash_type; ++ struct sunxi_req_ctx *op = ahash_request_ctx(areq); ++ ++ memset(op, 0, sizeof(struct sunxi_req_ctx)); ++ ++ hash_type = crypto_tfm_alg_name(areq->base.tfm); ++ ++ if (strcmp(hash_type, "sha1") == 0) ++ op->mode = SS_OP_SHA1; ++ if (strcmp(hash_type, "md5") == 0) ++ op->mode = SS_OP_MD5; ++ if (op->mode == 0) ++ return -EINVAL; ++ ++ return 0; ++} ++ ++static u32 rx_cnt; ++ ++inline void ss_writer(const u32 v) ++{ ++ u32 spaces; ++ ++ writel(v, ss->base + SS_RXFIFO); ++ rx_cnt--; ++ while (rx_cnt == 0) { ++ spaces = readl_relaxed(ss->base + SS_FCSR); ++ rx_cnt = SS_RXFIFO_SPACES(spaces); ++ } ++} ++ ++inline void ss_writer_relaxed(const u32 v) ++{ ++ u32 spaces; ++ ++ writel_relaxed(v, ss->base + SS_RXFIFO); ++ rx_cnt--; ++ while (rx_cnt == 0) { ++ spaces = readl_relaxed(ss->base + SS_FCSR); ++ rx_cnt = SS_RXFIFO_SPACES(spaces); ++ } ++} ++ ++/* ++ * sunxi_hash_update: update hash engine ++ * ++ * Could be used for both SHA1 and MD5 ++ * Write data by step of 32bits and put then in the SS. ++ * ++ * Since we cannot leave partial data and hash state in the engine, ++ * we need to get the hash state at the end of this function. ++ * After some work, I have found that we can get the hash state every 64o ++ * ++ * So the first work is to get the number of bytes to write to SS modulo 64 ++ * The extra bytes will go to two different destination: ++ * op->wait for full 32bits word ++ * op->wb (waiting bytes) for partial 32 bits word ++ * So we can have up to (64/4)-1 op->wait words and 0/1/2/3 bytes in wb ++ * ++ * So at the begin of update() ++ * if op->nwait * 4 + areq->nbytes < 64 ++ * => all data writed to wait buffers and end=0 ++ * if not write all nwait to the device and position end to complete to 64o ++ * ++ * example 1: ++ * update1 60o => nwait=15 ++ * update2 60o => need one more word to have 64o ++ * end=4 ++ * so write all data in op->wait and one word of SGs ++ * write remaining data in op->wait ++ * final state op->nwait=14 ++ */ ++int sunxi_hash_update(struct ahash_request *areq) ++{ ++ u32 v, ivmode = 0; ++ unsigned int i = 0; ++ /* ++ * i is the total bytes read from SGs, to be compared to areq->nbytes ++ * i is important because we cannot rely on SG length since the sum of ++ * SG->length could be greater than areq->nbytes ++ */ ++ ++ struct sunxi_req_ctx *op = ahash_request_ctx(areq); ++ struct scatterlist *in_sg; ++ unsigned int in_i = 0; /* advancement in the current SG */ ++ u64 end; ++ /* ++ * end is the position when we need to stop writing to the device, ++ * to be compared to i ++ */ ++ int in_r; ++ void *src_addr; ++ ++ dev_dbg(ss->dev, "%s %s bc=%llu len=%u mode=%x bw=%u ww=%u", ++ __func__, crypto_tfm_alg_name(areq->base.tfm), ++ op->byte_count, areq->nbytes, op->mode, ++ op->nbw, op->nwait); ++ ++ if (areq->nbytes == 0) ++ return 0; ++ ++ end = ((areq->nbytes + op->nwait * 4 + op->nbw) / 64) * 64 ++ - op->nbw - op->nwait * 4; ++ ++ if (end > areq->nbytes || areq->nbytes - end > 63) { ++ dev_err(ss->dev, "ERROR: Bound error %llu %u\n", ++ end, areq->nbytes); ++ return -EINVAL; ++ } ++ ++ if (op->nwait > 0 && end > 0) { ++ /* a precedent update was done */ ++ for (i = 0; i < op->nwait; i++) { ++ ss_writer(op->wait[i]); ++ op->byte_count += 4; ++ } ++ op->nwait = 0; ++ } ++ ++ mutex_lock(&ss->lock); ++ /* ++ * if some data have been processed before, ++ * we need to restore the partial hash state ++ */ ++ if (op->byte_count > 0) { ++ ivmode = SS_IV_ARBITRARY; ++ for (i = 0; i < 5; i++) ++ writel(op->hash[i], ss->base + SS_IV0 + i * 4); ++ } ++ /* Enable the device */ ++ writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL); ++ ++ rx_cnt = 0; ++ i = 0; ++ ++ in_sg = areq->src; ++ src_addr = kmap(sg_page(in_sg)) + in_sg->offset; ++ if (src_addr == NULL) { ++ mutex_unlock(&ss->lock); ++ dev_err(ss->dev, "ERROR: Cannot kmap source buffer\n"); ++ return -EFAULT; ++ } ++ do { ++ /* ++ * step 1, if some bytes remains from last SG, ++ * try to complete them to 4 and send that word ++ */ ++ if (op->nbw > 0) { ++ while (op->nbw < 4 && i < areq->nbytes && ++ in_i < in_sg->length) { ++ op->wb |= (*(u8 *)(src_addr + in_i)) ++ << (8 * op->nbw); ++ dev_dbg(ss->dev, "%s Complete w=%d wb=%x\n", ++ __func__, op->nbw, op->wb); ++ i++; ++ in_i++; ++ op->nbw++; ++ } ++ if (op->nbw == 4) { ++ if (i <= end) { ++ ss_writer(op->wb); ++ op->byte_count += 4; ++ } else { ++ op->wait[op->nwait] = op->wb; ++ op->nwait++; ++ dev_dbg(ss->dev, "%s Keep %u bytes after %llu\n", ++ __func__, op->nwait, end); ++ } ++ op->nbw = 0; ++ op->wb = 0; ++ } ++ } ++ /* step 2, main loop, read data 4bytes at a time */ ++ while (i < areq->nbytes && in_i < in_sg->length) { ++ /* how many bytes we can read, (we need 4) */ ++ in_r = min(in_sg->length - in_i, areq->nbytes - i); ++ if (in_r < 4) { ++ /* Not enough data to write to the device */ ++ op->wb = 0; ++ while (in_r > 0) { ++ op->wb |= (*(u8 *)(src_addr + in_i)) ++ << (8 * op->nbw); ++ dev_dbg(ss->dev, "%s ending bw=%d wb=%x\n", ++ __func__, op->nbw, op->wb); ++ in_r--; ++ i++; ++ in_i++; ++ op->nbw++; ++ } ++ goto nextsg; ++ } ++ v = *(u32 *)(src_addr + in_i); ++ if (i < end) { ++ /* last write must be done without relaxed */ ++ if (i + 4 >= end) ++ ss_writer(v); ++ else ++ ss_writer_relaxed(v); ++ i += 4; ++ op->byte_count += 4; ++ in_i += 4; ++ } else { ++ op->wait[op->nwait] = v; ++ i += 4; ++ in_i += 4; ++ op->nwait++; ++ dev_dbg(ss->dev, "%s Keep word ww=%u after %llu\n", ++ __func__, op->nwait, end); ++ if (op->nwait > 15) { ++ dev_err(ss->dev, "FATAL: Cannot enqueue more, bug?\n"); ++ writel(0, ss->base + SS_CTL); ++ mutex_unlock(&ss->lock); ++ return -EIO; ++ } ++ } ++ } ++nextsg: ++ /* Nothing more to read in this SG */ ++ if (in_i == in_sg->length) { ++ kunmap(sg_page(in_sg)); ++ do { ++ in_sg = sg_next(in_sg); ++ } while (in_sg != NULL && in_sg->length == 0); ++ in_i = 0; ++ if (in_sg != NULL) { ++ src_addr = kmap(sg_page(in_sg)) + in_sg->offset; ++ if (src_addr == NULL) { ++ mutex_unlock(&ss->lock); ++ dev_err(ss->dev, "ERROR: Cannot kmap source buffer\n"); ++ return -EFAULT; ++ } ++ } ++ } ++ } while (in_sg != NULL && i < areq->nbytes); ++ ++ /* ask the device to finish the hashing */ ++ writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL); ++ i = 0; ++ do { ++ v = readl(ss->base + SS_CTL); ++ i++; ++ } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0); ++ if (i >= SS_TIMEOUT) { ++ dev_err(ss->dev, "ERROR: %s hash end timeout after %d loop, CTL=%x\n", ++ __func__, i, v); ++ writel(0, ss->base + SS_CTL); ++ mutex_unlock(&ss->lock); ++ return -EIO; ++ } ++ ++ /* get the partial hash */ ++ if (op->mode == SS_OP_SHA1) { ++ for (i = 0; i < 5; i++) ++ op->hash[i] = readl(ss->base + SS_MD0 + i * 4); ++ } else { ++ for (i = 0; i < 4; i++) ++ op->hash[i] = readl(ss->base + SS_MD0 + i * 4); ++ } ++ ++ writel(0, ss->base + SS_CTL); ++ mutex_unlock(&ss->lock); ++ return 0; ++} ++ ++/* ++ * sunxi_hash_final: finalize hashing operation ++ * ++ * If we have some remaining bytes, we write them. ++ * Then ask the SS for finalizing the hashing operation ++ */ ++int sunxi_hash_final(struct ahash_request *areq) ++{ ++ u32 v, ivmode = 0; ++ unsigned int i; ++ int zeros; ++ unsigned int index, padlen; ++ __be64 bits; ++ struct sunxi_req_ctx *op = ahash_request_ctx(areq); ++ ++ dev_dbg(ss->dev, "%s byte=%llu len=%u mode=%x bw=%u %x h=%x ww=%u", ++ __func__, op->byte_count, areq->nbytes, op->mode, ++ op->nbw, op->wb, op->hash[0], op->nwait); ++ ++ mutex_lock(&ss->lock); ++ rx_cnt = 0; ++ ++ /* ++ * if we have already writed something, ++ * restore the partial hash state ++ */ ++ if (op->byte_count > 0) { ++ ivmode = SS_IV_ARBITRARY; ++ for (i = 0; i < 5; i++) ++ writel(op->hash[i], ss->base + SS_IV0 + i * 4); ++ } ++ writel(op->mode | SS_ENABLED | ivmode, ss->base + SS_CTL); ++ ++ /* write the remaining words of the wait buffer */ ++ if (op->nwait > 0) { ++ for (i = 0; i < op->nwait; i++) { ++ v = op->wait[i]; ++ ss_writer(v); ++ op->byte_count += 4; ++ dev_dbg(ss->dev, "%s write %llu i=%u %x\n", ++ __func__, op->byte_count, i, v); ++ } ++ op->nwait = 0; ++ } ++ ++ /* write the remaining bytes of the nbw buffer */ ++ if (op->nbw > 0) { ++ op->wb |= ((1 << 7) << (op->nbw * 8)); ++ ss_writer(op->wb); ++ } else { ++ ss_writer((1 << 7)); ++ } ++ ++ /* ++ * number of space to pad to obtain 64o minus 8(size) minus 4 (final 1) ++ * I take the operations from other md5/sha1 implementations ++ */ ++ ++ /* we have already send 4 more byte of which nbw data */ ++ if (op->mode == SS_OP_MD5) { ++ index = (op->byte_count + 4) & 0x3f; ++ op->byte_count += op->nbw; ++ if (index > 56) ++ zeros = (120 - index) / 4; ++ else ++ zeros = (56 - index) / 4; ++ } else { ++ op->byte_count += op->nbw; ++ index = op->byte_count & 0x3f; ++ padlen = (index < 56) ? (56 - index) : ((64+56) - index); ++ zeros = (padlen - 1) / 4; ++ } ++ for (i = 0; i < zeros; i++) ++ ss_writer(0); ++ ++ /* write the length of data */ ++ if (op->mode == SS_OP_SHA1) { ++ bits = cpu_to_be64(op->byte_count << 3); ++ ss_writer(bits & 0xffffffff); ++ ss_writer((bits >> 32) & 0xffffffff); ++ } else { ++ ss_writer((op->byte_count << 3) & 0xffffffff); ++ ss_writer((op->byte_count >> 29) & 0xffffffff); ++ } ++ ++ /* Tell the SS to stop the hashing */ ++ writel(op->mode | SS_ENABLED | SS_DATA_END, ss->base + SS_CTL); ++ ++ /* ++ * Wait for SS to finish the hash. ++ * The timeout could happend only in case of bad overcloking ++ * or driver bug. ++ */ ++ i = 0; ++ do { ++ v = readl(ss->base + SS_CTL); ++ i++; ++ } while (i < SS_TIMEOUT && (v & SS_DATA_END) > 0); ++ if (i >= SS_TIMEOUT) { ++ dev_err(ss->dev, "ERROR: hash end timeout %d>%d ctl=%x len=%u\n", ++ i, SS_TIMEOUT, v, areq->nbytes); ++ writel(0, ss->base + SS_CTL); ++ mutex_unlock(&ss->lock); ++ return -EIO; ++ } ++ ++ /* Get the hash from the device */ ++ if (op->mode == SS_OP_SHA1) { ++ for (i = 0; i < 5; i++) { ++ v = cpu_to_be32(readl(ss->base + SS_MD0 + i * 4)); ++ memcpy(areq->result + i * 4, &v, 4); ++ } ++ } else { ++ for (i = 0; i < 4; i++) { ++ v = readl(ss->base + SS_MD0 + i * 4); ++ memcpy(areq->result + i * 4, &v, 4); ++ } ++ } ++ writel(0, ss->base + SS_CTL); ++ mutex_unlock(&ss->lock); ++ return 0; ++} ++ ++/* sunxi_hash_finup: finalize hashing operation after an update */ ++int sunxi_hash_finup(struct ahash_request *areq) ++{ ++ int err; ++ ++ err = sunxi_hash_update(areq); ++ if (err != 0) ++ return err; ++ ++ return sunxi_hash_final(areq); ++} ++ ++/* combo of init/update/final functions */ ++int sunxi_hash_digest(struct ahash_request *areq) ++{ ++ int err; ++ ++ err = sunxi_hash_init(areq); ++ if (err != 0) ++ return err; ++ ++ err = sunxi_hash_update(areq); ++ if (err != 0) ++ return err; ++ ++ return sunxi_hash_final(areq); ++} +diff --git a/drivers/crypto/sunxi-ss/sunxi-ss.h b/drivers/crypto/sunxi-ss/sunxi-ss.h +new file mode 100644 +index 0000000..331e75b +--- /dev/null ++++ b/drivers/crypto/sunxi-ss/sunxi-ss.h +@@ -0,0 +1,193 @@ ++/* ++ * sunxi-ss.c - hardware cryptographic accelerator for Allwinner A20 SoC ++ * ++ * Copyright (C) 2013-2014 Corentin LABBE ++ * ++ * Support AES cipher with 128,192,256 bits keysize. ++ * Support MD5 and SHA1 hash algorithms. ++ * Support DES and 3DES ++ * ++ * You could find the datasheet in Documentation/arm/sunxi/README ++ * ++ * Licensed under the GPL-2. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#define SS_CTL 0x00 ++#define SS_KEY0 0x04 ++#define SS_KEY1 0x08 ++#define SS_KEY2 0x0C ++#define SS_KEY3 0x10 ++#define SS_KEY4 0x14 ++#define SS_KEY5 0x18 ++#define SS_KEY6 0x1C ++#define SS_KEY7 0x20 ++ ++#define SS_IV0 0x24 ++#define SS_IV1 0x28 ++#define SS_IV2 0x2C ++#define SS_IV3 0x30 ++ ++#define SS_CNT0 0x34 ++#define SS_CNT1 0x38 ++#define SS_CNT2 0x3C ++#define SS_CNT3 0x40 ++ ++#define SS_FCSR 0x44 ++#define SS_ICSR 0x48 ++ ++#define SS_MD0 0x4C ++#define SS_MD1 0x50 ++#define SS_MD2 0x54 ++#define SS_MD3 0x58 ++#define SS_MD4 0x5C ++ ++#define SS_RXFIFO 0x200 ++#define SS_TXFIFO 0x204 ++ ++/* SS_CTL configuration values */ ++ ++/* PRNG generator mode - bit 15 */ ++#define SS_PRNG_ONESHOT (0 << 15) ++#define SS_PRNG_CONTINUE (1 << 15) ++ ++/* IV mode for hash */ ++#define SS_IV_ARBITRARY (1 << 14) ++ ++/* SS operation mode - bits 12-13 */ ++#define SS_ECB (0 << 12) ++#define SS_CBC (1 << 12) ++#define SS_CNT (2 << 12) ++ ++/* Counter width for CNT mode - bits 10-11 */ ++#define SS_CNT_16BITS (0 << 10) ++#define SS_CNT_32BITS (1 << 10) ++#define SS_CNT_64BITS (2 << 10) ++ ++/* Key size for AES - bits 8-9 */ ++#define SS_AES_128BITS (0 << 8) ++#define SS_AES_192BITS (1 << 8) ++#define SS_AES_256BITS (2 << 8) ++ ++/* Operation direction - bit 7 */ ++#define SS_ENCRYPTION (0 << 7) ++#define SS_DECRYPTION (1 << 7) ++ ++/* SS Method - bits 4-6 */ ++#define SS_OP_AES (0 << 4) ++#define SS_OP_DES (1 << 4) ++#define SS_OP_3DES (2 << 4) ++#define SS_OP_SHA1 (3 << 4) ++#define SS_OP_MD5 (4 << 4) ++#define SS_OP_PRNG (5 << 4) ++ ++/* Data end bit - bit 2 */ ++#define SS_DATA_END (1 << 2) ++ ++/* PRNG start bit - bit 1 */ ++#define SS_PRNG_START (1 << 1) ++ ++/* SS Enable bit - bit 0 */ ++#define SS_DISABLED (0 << 0) ++#define SS_ENABLED (1 << 0) ++ ++/* SS_FCSR configuration values */ ++/* RX FIFO status - bit 30 */ ++#define SS_RXFIFO_FREE (1 << 30) ++ ++/* RX FIFO empty spaces - bits 24-29 */ ++#define SS_RXFIFO_SPACES(val) (((val) >> 24) & 0x3f) ++ ++/* TX FIFO status - bit 22 */ ++#define SS_TXFIFO_AVAILABLE (1 << 22) ++ ++/* TX FIFO available spaces - bits 16-21 */ ++#define SS_TXFIFO_SPACES(val) (((val) >> 16) & 0x3f) ++ ++#define SS_RXFIFO_EMP_INT_PENDING (1 << 10) ++#define SS_TXFIFO_AVA_INT_PENDING (1 << 8) ++#define SS_RXFIFO_EMP_INT_ENABLE (1 << 2) ++#define SS_TXFIFO_AVA_INT_ENABLE (1 << 0) ++ ++/* SS_ICSR configuration values */ ++#define SS_ICS_DRQ_ENABLE (1 << 4) ++ ++struct sunxi_ss_ctx { ++ void __iomem *base; ++ int irq; ++ struct clk *busclk; ++ struct clk *ssclk; ++ struct device *dev; ++ struct resource *res; ++ void *buf_in; /* pointer to data to be uploaded to the device */ ++ size_t buf_in_size; /* size of buf_in */ ++ void *buf_out; ++ size_t buf_out_size; ++ struct mutex lock; /* control the use of the device */ ++ struct mutex bufout_lock; /* control the use of buf_out*/ ++ struct mutex bufin_lock; /* control the sue of buf_in*/ ++}; ++ ++struct sunxi_tfm_ctx { ++ u32 key[AES_MAX_KEY_SIZE / 4];/* divided by sizeof(u32) */ ++ u32 keylen; ++ u32 keymode; ++}; ++ ++struct sunxi_req_ctx { ++ u32 mode; ++ u64 byte_count; /* number of bytes "uploaded" to the device */ ++ u32 wb; /* a partial word waiting to be completed and ++ uploaded to the device */ ++ /* number of bytes to be uploaded in the wb word */ ++ unsigned int nbw; ++ u32 hash[5]; ++ u32 wait[64]; ++ unsigned int nwait; ++}; ++ ++#define SS_SEED_LEN (192/8) ++#define SS_DATA_LEN (160/8) ++ ++struct prng_context { ++ u32 seed[SS_SEED_LEN/4]; ++ unsigned int slen; ++}; ++ ++int sunxi_hash_crainit(struct crypto_tfm *tfm); ++int sunxi_hash_init(struct ahash_request *areq); ++int sunxi_hash_update(struct ahash_request *areq); ++int sunxi_hash_final(struct ahash_request *areq); ++int sunxi_hash_finup(struct ahash_request *areq); ++int sunxi_hash_digest(struct ahash_request *areq); ++int sunxi_hash_export(struct ahash_request *areq, void *out); ++int sunxi_hash_import(struct ahash_request *areq, const void *in); ++ ++int sunxi_ss_aes_poll(struct ablkcipher_request *areq, u32 mode); ++int sunxi_ss_des_poll(struct ablkcipher_request *areq, u32 mode); ++int sunxi_ss_cipher_init(struct crypto_tfm *tfm); ++int sunxi_ss_cipher_encrypt(struct ablkcipher_request *areq); ++int sunxi_ss_cipher_decrypt(struct ablkcipher_request *areq); ++int sunxi_ss_aes_setkey(struct crypto_ablkcipher *tfm, const u8 *key, ++ unsigned int keylen); ++int sunxi_ss_des_setkey(struct crypto_ablkcipher *tfm, const u8 *key, ++ unsigned int keylen); ++int sunxi_ss_des3_setkey(struct crypto_ablkcipher *tfm, const u8 *key, ++ unsigned int keylen); diff --git a/target/linux/sunxi/patches-3.18/300-dt-sun7i-add-bananapi.patch b/target/linux/sunxi/patches-3.18/300-dt-sun7i-add-bananapi.patch new file mode 100644 index 0000000000..0ee3195d06 --- /dev/null +++ b/target/linux/sunxi/patches-3.18/300-dt-sun7i-add-bananapi.patch @@ -0,0 +1,250 @@ +From 29b4146ec174f0f598d6b454caa335e8f57e392b Mon Sep 17 00:00:00 2001 +From: Hans de Goede +Date: Mon, 28 Jul 2014 23:05:14 +0200 +Subject: [PATCH] ARM: dts: sun7i: Add Banana Pi board + +The Banana Pi is an A20 based development board using Raspberry Pi compatible +IO headers. It comes with 1 GB RAM, 1 Gb ethernet, 2x USB host, sata, hdmi +and stereo audio out + various expenansion headers: + +http://www.lemaker.org/ + +Signed-off-by: Hans de Goede +--- + arch/arm/boot/dts/Makefile | 1 + + arch/arm/boot/dts/sun7i-a20-bananapi.dts | 214 +++++++++++++++++++++++++++++++ + 2 files changed, 215 insertions(+) + create mode 100644 arch/arm/boot/dts/sun7i-a20-bananapi.dts + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index 38c89ca..63422bd 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -435,6 +435,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \ + sun6i-a31-hummingbird.dtb \ + sun6i-a31-m9.dtb + dtb-$(CONFIG_MACH_SUN7I) += \ ++ sun7i-a20-bananapi.dtb \ + sun7i-a20-cubieboard2.dtb \ + sun7i-a20-cubietruck.dtb \ + sun7i-a20-hummingbird.dtb \ +diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts +new file mode 100644 +index 0000000..0e7c9f5 +--- /dev/null ++++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts +@@ -0,0 +1,214 @@ ++/* ++ * Copyright 2014 Hans de Goede ++ * ++ * Hans de Goede ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This library is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ * ++ * This library is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public ++ * License along with this library; if not, write to the Free ++ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, ++ * MA 02110-1301 USA ++ * ++ * Or, alternatively, ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use, ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++ ++/dts-v1/; ++/include/ "sun7i-a20.dtsi" ++/include/ "sunxi-common-regulators.dtsi" ++ ++/ { ++ model = "LeMaker Banana Pi"; ++ compatible = "lemaker,bananapi", "allwinner,sun7i-a20"; ++ ++ soc@01c00000 { ++ spi0: spi@01c05000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi0_pins_a>; ++ status = "okay"; ++ }; ++ ++ mmc0: mmc@01c0f000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; ++ vmmc-supply = <®_vcc3v3>; ++ bus-width = <4>; ++ cd-gpios = <&pio 7 10 0>; /* PH10 */ ++ cd-inverted; ++ status = "okay"; ++ }; ++ ++ usbphy: phy@01c13400 { ++ usb1_vbus-supply = <®_usb1_vbus>; ++ usb2_vbus-supply = <®_usb2_vbus>; ++ status = "okay"; ++ }; ++ ++ ehci0: usb@01c14000 { ++ status = "okay"; ++ }; ++ ++ ohci0: usb@01c14400 { ++ status = "okay"; ++ }; ++ ++ ahci: sata@01c18000 { ++ status = "okay"; ++ }; ++ ++ ehci1: usb@01c1c000 { ++ status = "okay"; ++ }; ++ ++ ohci1: usb@01c1c400 { ++ status = "okay"; ++ }; ++ ++ pinctrl@01c20800 { ++ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 { ++ allwinner,pins = "PH10"; ++ allwinner,function = "gpio_in"; ++ allwinner,drive = <0>; ++ allwinner,pull = <1>; ++ }; ++ ++ gmac_power_pin_bananapi: gmac_power_pin@0 { ++ allwinner,pins = "PH23"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ ++ led_pins_bananapi: led_pins@0 { ++ allwinner,pins = "PH24"; ++ allwinner,function = "gpio_out"; ++ allwinner,drive = <0>; ++ allwinner,pull = <0>; ++ }; ++ }; ++ ++ ir0: ir@01c21800 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&ir0_pins_a>; ++ status = "okay"; ++ }; ++ ++ uart0: serial@01c28000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins_a>; ++ status = "okay"; ++ }; ++ ++ uart3: serial@01c28c00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart3_pins_b>; ++ status = "okay"; ++ }; ++ ++ uart7: serial@01c29c00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart7_pins_a>; ++ status = "okay"; ++ }; ++ ++ i2c0: i2c@01c2ac00 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c0_pins_a>; ++ status = "okay"; ++ ++ axp209: pmic@34 { ++ compatible = "x-powers,axp209"; ++ reg = <0x34>; ++ interrupt-parent = <&nmi_intc>; ++ interrupts = <0 8>; ++ ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ }; ++ }; ++ ++ i2c2: i2c@01c2b400 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&i2c2_pins_a>; ++ status = "okay"; ++ }; ++ ++ gmac: ethernet@01c50000 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_pins_rgmii_a>; ++ phy = <&phy1>; ++ phy-mode = "rgmii"; ++ phy-supply = <®_gmac_3v3>; ++ status = "okay"; ++ ++ phy1: ethernet-phy@1 { ++ reg = <1>; ++ }; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&led_pins_bananapi>; ++ ++ green { ++ label = "bananapi:green:usr"; ++ gpios = <&pio 7 24 0>; ++ }; ++ }; ++ ++ reg_usb1_vbus: usb1-vbus { ++ status = "okay"; ++ }; ++ ++ reg_usb2_vbus: usb2-vbus { ++ status = "okay"; ++ }; ++ ++ reg_gmac_3v3: gmac-3v3 { ++ compatible = "regulator-fixed"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&gmac_power_pin_bananapi>; ++ regulator-name = "gmac-3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ startup-delay-us = <50000>; ++ enable-active-high; ++ gpio = <&pio 7 23 0>; ++ }; ++};