From: Daniel Golle Date: Tue, 23 Jan 2018 01:46:36 +0000 (+0100) Subject: ramips: add support for ZBT-WE1226 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9c4fe103cb;p=openwrt%2Fstaging%2Fdangole.git ramips: add support for ZBT-WE1226 MT7628NN (580MHz), 8MB SPI NOR, 64MB DDR2 RAM Everything except for the switch LEDs works great. Signed-off-by: Daniel Golle --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 0b0feb4156..37630cde66 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -491,6 +491,12 @@ zbt-we826-32M) set_wifi_led "zbt-we826:green:wifi" set_usb_led "zbt-we826:green:usb" ;; +zbt-we1226) + set_wifi_led "$boardname:green:wlan" + ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x01" + ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x02" + ucidef_set_led_switch "wan" "WAN" "$boardname:green:wan" "switch0" "0x10" + ;; zbt-wr8305rt) ucidef_set_led_default "power" "power" "$boardname:green:sys" "1" set_usb_led "$boardname:green:usb" diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 7deebbcef0..f50a5a6d46 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -349,6 +349,7 @@ ramips_setup_interfaces() ucidef_add_switch "switch0" \ "1:lan" "2:lan" "0:wan" "6@eth0" ;; + zbt-we1226|\ y1) ucidef_add_switch "switch0" \ "0:lan:2" "1:lan:1" "4:wan" "6@eth0" diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index f290c3f9a7..22687b1970 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -314,6 +314,9 @@ get_status_led() { zbt-we826-32M) status_led="zbt-we826:green:power" ;; + zbt-we1226) + status_led="zbt-we1226:green:wlan" + ;; zbt-wg3526-16M|\ zbt-wg3526-32M) status_led="zbt-wg3526:green:status" diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 3ba6d0f0f5..60cf9b298c 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -688,6 +688,9 @@ ramips_board_detect() { *"ZBT-WA05") name="zbt-wa05" ;; + *"ZBT-WE1226") + name="zbt-we1226" + ;; *"ZBT-WE1326") name="zbt-we1326" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index bce49a61d7..730f487b30 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -203,6 +203,7 @@ platform_check_image() { zbt-ape522ii|\ zbt-cpe102|\ zbt-wa05|\ + zbt-we1226|\ zbt-we1326|\ zbt-we2026|\ zbtlink,zbt-we3526|\ diff --git a/target/linux/ramips/dts/ZBT-WE1226.dts b/target/linux/ramips/dts/ZBT-WE1226.dts new file mode 100644 index 0000000000..67e4353c12 --- /dev/null +++ b/target/linux/ramips/dts/ZBT-WE1226.dts @@ -0,0 +1,111 @@ +/dts-v1/; +#include +#include + +#include "mt7628an.dtsi" + +/ { + compatible = "zbt,we1226", "mediatek,mt7628an-soc"; + model = "Zbtlink ZBT-WE1226"; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + lan2 { + label = "zbt-we1226:green:lan2"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "zbt-we1226:green:lan1"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "zbt-we1226:green:wan"; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; + }; + + wlan { + label = "zbt-we1226:green:wlan"; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "wled_an"; + ralink,function = "gpio"; + }; + }; +}; + +&spi0 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <10000000>; + m25p,chunked-io = <32>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; +}; + +&wmac { + status = "okay"; + ralink,mtd-eeprom = <&factory 0x4>; +}; + +ðernet { + mtd-mac-address = <&factory 0x2e>; + mediatek,portmap = "llllw"; +}; diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk index 8332c7c423..ae8a1344d5 100644 --- a/target/linux/ramips/image/mt76x8.mk +++ b/target/linux/ramips/image/mt76x8.mk @@ -238,3 +238,10 @@ define Device/wrtnode2r DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci endef TARGET_DEVICES += wrtnode2r + +define Device/zbt-we1226 + DTS := ZBT-WE1226 + IMAGE_SIZE := $(ralink_default_fw_size_8M) + DEVICE_TITLE := ZBTlink ZBT-WE1226 +endef +TARGET_DEVICES += zbt-we1226