From: Mengyang Li <mayli.he@gmail.com>
Date: Sat, 24 Oct 2020 00:07:18 +0000 (-0700)
Subject: x86: enable CONFIG_MMC_SDHCI_ACPI for x86_64
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9c13513ce1fdfbd4adc8bc7bce54f34b3689e940;p=openwrt%2Fstaging%2Fblocktrron.git

x86: enable CONFIG_MMC_SDHCI_ACPI for x86_64

Some x86_64 single board computer (including Atomic Pi)
has onboard emmc, but requires CONFIG_MMC_SDHCI_ACPI driver
to use or boot from it.

Here is boot message for the mmc device

[    2.838008] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[    2.857536] mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA
[    2.950019] mmc0: new HS200 MMC card at address 0001
[    3.158271] mmcblk0: mmc0:0001 M52516 14.6 GiB
[    3.170290] mmcblk0boot0: mmc0:0001 M52516 partition 1 4.00 MiB
[    3.177191] mmcblk0boot1: mmc0:0001 M52516 partition 2 4.00 MiB
[    3.183963] mmcblk0rpmb: mmc0:0001 M52516 partition 3 4.00 MiB, \
chardev (248:0)

Other lines changed in this config file are introduced by menuconfig.

Signed-off-by: Mengyang Li <mayli.he@gmail.com>
---

diff --git a/target/linux/x86/64/config-5.4 b/target/linux/x86/64/config-5.4
index 3954abfd4f..f09deca5b0 100644
--- a/target/linux/x86/64/config-5.4
+++ b/target/linux/x86/64/config-5.4
@@ -115,6 +115,7 @@ CONFIG_CRYPTO_SIMD=y
 # CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
 CONFIG_CRYPTO_XTS=y
 # CONFIG_DEBUG_HOTPLUG_CPU0 is not set
+CONFIG_DMA_ACPI=y
 CONFIG_DMA_SHARED_BUFFER=y
 # CONFIG_DPTF_POWER is not set
 CONFIG_DRM=y
@@ -295,6 +296,7 @@ CONFIG_MMC_CQHCI=y
 CONFIG_MMC_RICOH_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_ACPI=y
 CONFIG_MMC_SDHCI_PCI=y
 # CONFIG_MMC_SDHCI_PLTFM is not set
 # CONFIG_MMC_TIFM_SD is not set