From: Skirmantas Lauzikas Date: Sun, 28 Oct 2018 04:30:52 +0000 (+0200) Subject: ath79: add support for TP-Link Archer C2 V3 (AC900) X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9c01273e5e7b3929ad46d974685ec29de207a8de;p=openwrt%2Fstaging%2Fblogic.git ath79: add support for TP-Link Archer C2 V3 (AC900) This commit adds support for the TP-link Archer C2 V3 (AC900). Specifications: - CPU: QCA9563 750Mhz - Ram: 64MB (DDR2) - Flash: 8MB (SPI NOR) - Ethernet: 5x 10/100/1000 - Wifi: QCA9563 bgn + QCA9887 an+ac - 9x Leds, 2x buttons Flash instructions: Upload openwrt-ath79-generic-tplink_archer-c2-v3-squashfs-factory.bin via the router Web interface and flash as normal firmware update. Signed-off-by: Skirmantas Lauzikas [reorder entries, fix trailing whitespace in dts, add firmware partition compatible string, remove led default off states, use default on state for system led, reuse tplink-safeloader-uimage image build recipe, squash with dynamic partitioning commit, reword commit message, add installation instructions] Signed-off-by: Jo-Philipp Wich --- diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index c5ea726ce497..1c9d43edbabc 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -81,6 +81,14 @@ tplink,archer-c7-v5) ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x10" ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x20" ;; +tplink,archer-c2-v3|\ +tplink,tl-wr1043nd-v4) + ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20" + ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" + ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" + ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04" + ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" + ;; tplink,archer-c58-v1|\ tplink,archer-c59-v1) ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E" @@ -98,13 +106,6 @@ tplink,tl-mr3020-v1|\ tplink,tl-mr3040-v2) ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" ;; -tplink,tl-wr1043nd-v4) - ucidef_set_led_switch "wan" "WAN" "tp-link:green:wan" "switch0" "0x20" - ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" - ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" - ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x04" - ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x02" - ;; tplink,tl-wr740n-v1|\ tplink,tl-wr740n-v3|\ tplink,tl-wr741-v1|\ diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network index 4197f331b759..6f3ef614db59 100755 --- a/target/linux/ath79/base-files/etc/board.d/02_network +++ b/target/linux/ath79/base-files/etc/board.d/02_network @@ -74,6 +74,7 @@ ath79_setup_interfaces() dlink,dir-825-c1|\ dlink,dir-835-a1|\ dlink,dir-859-a1|\ + tplink,archer-c2-v3|\ tplink,tl-wr1043nd-v4) ucidef_add_switch "switch0" \ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 84e43ceee518..da6c14af1774 100644 --- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -126,6 +126,10 @@ case "$FIRMWARE" in ath10kcal_extract "ART" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; + tplink,archer-c2-v3) + ath10kcal_extract "ART" 20480 2116 + ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1) + ;; tplink,archer-c7-v2) ath10kcal_extract "art" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1) diff --git a/target/linux/ath79/dts/qca9563_tplink_archer-c2-v3.dts b/target/linux/ath79/dts/qca9563_tplink_archer-c2-v3.dts new file mode 100644 index 000000000000..9686290e738b --- /dev/null +++ b/target/linux/ath79/dts/qca9563_tplink_archer-c2-v3.dts @@ -0,0 +1,185 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include +#include + +#include "qca956x.dtsi" + +/ { + compatible = "tplink,archer-c2-v3", "qca,qca9563"; + model = "TP-Link Archer C2 Version 3"; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + aliases { + led-boot = &system; + led-failsafe = &system; + led-running = &system; + led-upgrade = &system; + }; + + gpio_leds: leds { + compatible = "gpio-leds"; + + system: system { + label = "tp-link:green:system"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wifi2g { + label = "tp-link:green:wifi2g"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + + wifi5g { + label = "tp-link:green:wifi5g"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + wifi_wps { + label = "tp-link:green:wps"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + + wan { + label = "tp-link:green:wan"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + wan_fail { + label = "tp-link:orange:wan"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + lan1 { + label = "tp-link:green:lan1"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + + lan2 { + label = "tp-link:green:lan2"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + lan3 { + label = "tp-link:green:lan3"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + + lan4 { + label = "tp-link:green:lan4"; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + linux,code = ; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + + wps { + label = "WPS button"; + linux,code = ; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; +}; + +&uart { + status = "okay"; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "factory-uboot"; + reg = <0x000000 0x020000>; + read-only; + }; + + partition@20000 { + label = "uboot"; + reg = <0x020000 0x10000>; + }; + + partition@30000 { + label = "firmware"; + reg = <0x030000 0x7A0000>; + compatible = "denx,uimage"; + }; + + info: partition@7e0000 { + label = "product-info"; + reg = <0x7e0000 0x010000>; + read-only; + }; + + art: partition@7f0000 { + label = "ART"; + reg = <0x7f0000 0x010000>; + read-only; + }; + }; + }; +}; + +&gpio { + status = "okay"; +}; + +&mdio0 { + status = "okay"; + + phy-mask = <0>; + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "sgmii"; + + qca,ar8327-initvals = < + 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ + 0x7c 0x0000007e /* PORT0_STATUS */ + >; + }; +}; + +&pcie { + status = "okay"; +}; + +ð0 { + status = "okay"; + + mtd-mac-address = <&info 0x8>; + phy-mode = "sgmii"; + phy-handle = <&phy0>; +}; + +&wmac { + status = "okay"; + mtd-cal-data = <&art 0x1000>; + mtd-mac-address = <&info 0x8>; +}; diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index be755c7ec08b..52a181c353ca 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -12,6 +12,16 @@ define Device/tplink_archer-a7-v5 endef TARGET_DEVICES += tplink_archer-a7-v5 +define Device/tplink_archer-c2-v3 + $(Device/tplink-safeloader-uimage) + ATH_SOC := qca9563 + IMAGE_SIZE := 7808k + DEVICE_TITLE := TP-LINK Archer C2 v3 + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct + TPLINK_BOARD_ID := ARCHER-C2-V3 +endef +TARGET_DEVICES += tplink_archer-c2-v3 + define Device/tplink_archer-c58-v1 $(Device/tplink-safeloader-uimage) ATH_SOC := qca9561 diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c index 65034e380406..075cd8a7edd1 100644 --- a/tools/firmware-utils/src/tplink-safeloader.c +++ b/tools/firmware-utils/src/tplink-safeloader.c @@ -397,6 +397,44 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "file-system", }, + /** Firmware layout for the C2v3 */ + { + .id = "ARCHER-C2-V3", + .support_list = + "SupportList:\n" + "{product_name:ArcherC2,product_ver:3.0.0,special_id:00000000}\n" + "{product_name:ArcherC2,product_ver:3.0.0,special_id:55530000}\n" + "{product_name:ArcherC2,product_ver:3.0.0,special_id:45550000}\n", + .support_trail = '\x00', + .soft_ver = "soft_ver:3.0.1\n", + + /** We're using a dynamic kernel/rootfs split here */ + + .partitions = { + {"factory-boot", 0x00000, 0x20000}, + {"fs-uboot", 0x20000, 0x10000}, + {"firmware", 0x30000, 0x7a0000}, + {"user-config", 0x7d0000, 0x04000}, + {"default-mac", 0x7e0000, 0x00100}, + {"device-id", 0x7e0100, 0x00100}, + {"extra-para", 0x7e0200, 0x00100}, + {"pin", 0x7e0300, 0x00100}, + {"support-list", 0x7e0400, 0x00400}, + {"soft-version", 0x7e0800, 0x00400}, + {"product-info", 0x7e0c00, 0x01400}, + {"partition-table", 0x7e2000, 0x01000}, + {"profile", 0x7e3000, 0x01000}, + {"default-config", 0x7e4000, 0x04000}, + {"merge-config", 0x7ec000, 0x02000}, + {"qos-db", 0x7ee000, 0x02000}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system", + }, + /** Firmware layout for the C25v1 */ { .id = "ARCHER-C25-V1",