From: Christian Svensson Date: Sun, 11 Aug 2024 11:27:49 +0000 (+0200) Subject: octeon: n821: sysupgrade for Cisco vEdge 1000 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9bc782dfd8b09a96812771124eea56cbd230d9ad;p=openwrt%2Fstaging%2Flinusw.git octeon: n821: sysupgrade for Cisco vEdge 1000 This commit adds the logic required to install OpenWrt on a Cisco/Viptela vEdge 1000 while nicely integrating with the already present bootloader and making it possible to roll back to stock OS. The vEdge 1000 has a built-in SSD with a ext2 partition from which the stock u-boot boots the Linux kernel from. In order for Linux not to be confused about which partition the root file system is on, there are some tricks needed to ensure the partition is identifiable at boot time. For this we use blkid as part of the scripts, and sfdisk as part of the manual installation process documented on the wiki. Thus, those packages have been added as a platform dependency. Finally, the u-boot environment is updated which requires the use of uboot-envtools. Tested on a Cisco vEdge 1000. Signed-off-by: Christian Svensson Link: https://github.com/openwrt/openwrt/pull/16140 Signed-off-by: Robert Marko --- diff --git a/target/linux/octeon/base-files/lib/preinit/79_move_config b/target/linux/octeon/base-files/lib/preinit/79_move_config index e81627aaf2..db99e02ce8 100644 --- a/target/linux/octeon/base-files/lib/preinit/79_move_config +++ b/target/linux/octeon/base-files/lib/preinit/79_move_config @@ -4,29 +4,46 @@ move_config() { . /lib/upgrade/common.sh local device="$1" + local fstype="$2" [ -n "$device" ] && [ -b "$device" ] && { - mount -t vfat "$device" /mnt + mount -t "${fstype}" "$device" /mnt [ -f "/mnt/$BACKUP_FILE" ] && mv -f "/mnt/$BACKUP_FILE" / umount /mnt } } +octeon_get_n821_disk() { + local partnum=$1 + local MAJOR MINOR DEVNAME DEVTYPE + while read line; do + export -n "${line}" + done < $(find /sys/bus/platform/devices/16f0000000000.ehci/ -path \*block/sd[a-z]/uevent) + echo "/dev/${DEVNAME}${partnum}" +} + octeon_move_config() { . /lib/functions.sh case "$(board_name)" in erlite|\ ubnt,usg) - move_config "/dev/sda1" + move_config "/dev/sda1" "vfat" ;; itus,shield-router) - move_config "/dev/mmcblk1p1" + move_config "/dev/mmcblk1p1" "vfat" ;; er|\ ubnt,edgerouter-4|\ ubnt,edgerouter-6p) - move_config "/dev/mmcblk0p1" + move_config "/dev/mmcblk0p1" "vfat" ;; + cisco,vedge1000) + # Copy from the internal USB disk's first partition. + # It is resolved from the device path to not be dependent on which + # /dev/sd? path it is at, nor which UUID it happens to have. + move_config "$(octeon_get_n821_disk 1)" "ext2" + ;; + esac } diff --git a/target/linux/octeon/base-files/lib/upgrade/platform.sh b/target/linux/octeon/base-files/lib/upgrade/platform.sh index 0b018890c5..b8a856712b 100755 --- a/target/linux/octeon/base-files/lib/upgrade/platform.sh +++ b/target/linux/octeon/base-files/lib/upgrade/platform.sh @@ -2,11 +2,21 @@ # Copyright (C) 2021 OpenWrt.org # +if [ -x /usr/sbin/blkid ]; then + RAMFS_COPY_BIN="/usr/sbin/blkid" +fi + platform_get_rootfs() { local rootfsdev + local rootpartuuid if read cmdline < /proc/cmdline; then case "$cmdline" in + *root=PARTUUID=*) + rootpartuuid="${cmdline##*root=PARTUUID=}" + rootpartuuid="${rootpartuuid%% *}" + rootfsdev="$(blkid -o device -t PARTUUID="${rootpartuuid}")" + ;; *root=*) rootfsdev="${cmdline##*root=}" rootfsdev="${rootfsdev%% *}" @@ -17,10 +27,20 @@ platform_get_rootfs() { fi } +platform_get_n821_disk() { + local partnum=$1 + local DEVNAME + while read line; do + export -n "${line}" + done < $(find /sys/bus/platform/devices/16f0000000000.ehci/ -path \*block/sd[a-z]/uevent) + echo "/dev/${DEVNAME}${partnum}" +} + platform_copy_config_helper() { local device=$1 + local fstype=$2 - mount -t vfat "$device" /mnt + mount -t "${fstype}" "$device" /mnt cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE" umount /mnt } @@ -29,15 +49,18 @@ platform_copy_config() { case "$(board_name)" in erlite|\ ubnt,usg) - platform_copy_config_helper /dev/sda1 + platform_copy_config_helper /dev/sda1 vfat ;; itus,shield-router) - platform_copy_config_helper /dev/mmcblk1p1 + platform_copy_config_helper /dev/mmcblk1p1 vfat ;; er|\ ubnt,edgerouter-4|\ ubnt,edgerouter-6p) - platform_copy_config_helper /dev/mmcblk0p1 + platform_copy_config_helper /dev/mmcblk0p1 vfat + ;; + cisco,vedge1000) + platform_copy_config_helper "$(platform_get_n821_disk 1)" ext2 ;; esac } @@ -61,14 +84,26 @@ platform_do_flash() { echo "flashing Itus Kernel to /boot/$kernel (/dev/mmblk1p1)" tar -Oxf $tar_file "$board_dir/kernel" > /boot/$kernel else - mount -t vfat /dev/$kernel /boot + if [ "${board}" = "cisco,vedge1000" ]; then + local rootpartuuid + rootpartuuid="$(/usr/sbin/blkid -o value -s PARTUUID "${rootfs}")" + if [ -n "${rootpartuuid}" ]; then + echo "setting root partition to PARTUUID=${rootpartuuid}" + fw_setenv bootcmd 'usb start; ext2load usb 0:1 $loadaddr vmlinux.64; bootoctlinux $loadaddr coremask=f endbootargs rootfstype=squashfs rootwait root=PARTUUID='"${rootpartuuid}" + else + echo "WARNING: unable to figure out root partition UUID, leaving bootcmd unchanged" + fi + mount -t ext2 "${kernel}" /boot + else + mount -t vfat "${kernel}" /boot + fi [ -f /boot/vmlinux.64 -a ! -L /boot/vmlinux.64 ] && { mv /boot/vmlinux.64 /boot/vmlinux.64.previous mv /boot/vmlinux.64.md5 /boot/vmlinux.64.md5.previous } - echo "flashing kernel to /dev/$kernel" + echo "flashing kernel to $(awk '/\/boot/ {print $1}' /proc/mounts)" tar xf $tar_file $board_dir/kernel -O > /boot/vmlinux.64 md5sum /boot/vmlinux.64 | cut -f1 -d " " > /boot/vmlinux.64.md5 fi @@ -86,20 +121,27 @@ platform_do_upgrade() { local rootfs="$(platform_get_rootfs)" local kernel= + if [ ! -b "${rootfs}" ] && [ "${board}" = "cisco,vedge1000" ]; then + # Default to the built-in USB disk for N821 + rootfs="$(platform_get_n821_disk 2)" + fi [ -b "${rootfs}" ] || return 1 case "$board" in er | \ ubnt,edgerouter-4 | \ ubnt,edgerouter-6p) - kernel=mmcblk0p1 + kernel=/dev/mmcblk0p1 ;; erlite|\ ubnt,usg) - kernel=sda1 + kernel=/dev/sda1 ;; itus,shield-router) kernel=ItusrouterImage ;; + cisco,vedge1000) + kernel="$(platform_get_n821_disk 1)" + ;; *) return 1 esac @@ -123,7 +165,8 @@ platform_check_image() { itus,shield-router | \ ubnt,edgerouter-4 | \ ubnt,edgerouter-6p | \ - ubnt,usg) + ubnt,usg | \ + cisco,vedge1000) local kernel_length=$(tar xf $tar_file $board_dir/kernel -O | wc -c 2> /dev/null) local rootfs_length=$(tar xf $tar_file $board_dir/root -O | wc -c 2> /dev/null) [ "$kernel_length" = 0 -o "$rootfs_length" = 0 ] && { diff --git a/target/linux/octeon/image/Makefile b/target/linux/octeon/image/Makefile index 536ec5ff7c..f00e87c520 100644 --- a/target/linux/octeon/image/Makefile +++ b/target/linux/octeon/image/Makefile @@ -100,13 +100,16 @@ define Device/cisco_vedge1000 DEVICE_MODEL := vEdge 1000 BOARD_NAME := cisco,vedge1000 DEVICE_PACKAGES += \ + blkid \ kmod-hwmon-jc42 \ kmod-hwmon-max6697 \ kmod-of-mdio \ kmod-rtc-ds1307 \ kmod-usb-dwc3 \ kmod-usb-storage-uas \ - kmod-usb3 + kmod-usb3 \ + sfdisk \ + uboot-envtools KERNEL := kernel-bin | append-dtb-elf KERNEL_DEPENDS := $$(wildcard $(DTS_DIR)/$(DEVICE_DTS).dts) DEVICE_DTS := cn6130_cisco_vedge1000