From: Wolfram Sang Date: Tue, 21 Aug 2018 19:03:56 +0000 (+0200) Subject: arm64: dts: renesas: enable SDR104 on R-Car Gen3 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9bc03b57277c4272a9ef7c8c22672109d4416944;p=openwrt%2Fstaging%2Fblogic.git arm64: dts: renesas: enable SDR104 on R-Car Gen3 Successfully tested on H3 ES1.0 and ES2.0, M3-W ES1.0, and M3-N ES1.0. Even previously stubborn cards work fine. Transfer rates were >60MB/s. Signed-off-by: Wolfram Sang Signed-off-by: Simon Horman --- diff --git a/arch/arm64/boot/dts/renesas/salvator-common.dtsi b/arch/arm64/boot/dts/renesas/salvator-common.dtsi index 3b90f816dfef..d298f7c9ada1 100644 --- a/arch/arm64/boot/dts/renesas/salvator-common.dtsi +++ b/arch/arm64/boot/dts/renesas/salvator-common.dtsi @@ -751,6 +751,7 @@ wp-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; @@ -780,6 +781,7 @@ wp-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/ulcb.dtsi b/arch/arm64/boot/dts/renesas/ulcb.dtsi index 0ead552d7eae..7e6078508ba0 100644 --- a/arch/arm64/boot/dts/renesas/ulcb.dtsi +++ b/arch/arm64/boot/dts/renesas/ulcb.dtsi @@ -416,6 +416,7 @@ cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>; bus-width = <4>; sd-uhs-sdr50; + sd-uhs-sdr104; status = "okay"; };