From: Stephen Boyd Date: Wed, 7 Sep 2016 01:12:24 +0000 (-0700) Subject: Merge tag 'v4.9-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind... X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9bb87c027c3fe65f5e76c656a0d34d9980ccb121;p=openwrt%2Fstaging%2Fblogic.git Merge tag 'v4.9-rockchip-clk1' of git://git./linux/kernel/git/mmind/linux-rockchip into clk-next Pull rockchip clk driver updates from Heiko Stuebner: The biggest addition is probably the special clock-type for ddr clock control. While reading that clock is done the normal way from the registers, setting it always requires some sort of special handling to let the system survive this addition. As the commit message explains, there are currently 3 handling-types known. General SRAM-based code on rk3288 and before (which is waiting essentially for the PIE support that is currently being worked on), SCPI-based clk setting on the rk3368 through a coprocessor, which we might support once the support for legacy scpi-variants has matured and now on the rk3399 (and probably later) using a dcf controller that is controlled from the arm-trusted-firmware and gets accessed through firmware calls from the kernel. This is the variant we currently support, but the clock type is made to support the other variants in the future as well. Apart from that slightly bigger chunk, we have a mix of PLL rates, clock-ids and flags mainly for the rk3399. And interestingly an iomap fix for the legacy gate driver, where I hopefully could deter the submitter from actually using that in any new works. * tag 'v4.9-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: clk: rockchip: use the dclk_vop_frac clock ids on rk3399 clk: rockchip: drop CLK_SET_RATE_PARENT from rk3399 fractional dividers clk: rockchip: add 2016M to big cpu clk rate table on rk3399 clk: rockchip: add rk3399 ddr clock support clk: rockchip: add dclk_vop_frac ids for rk3399 vop clk: rockchip: add new clock-type for the ddrclk soc: rockchip: add header for ddr rate SIP interface clk: rockchip: add SCLK_DDRC id for rk3399 ddrc clk: rockchip: handle of_iomap failures in legacy clock driver clk: rockchip: mark rk3399 hdcp_noc and vio_noc as critical clk: rockchip: use general clock flag when registering pll clk: rockchip: delete the CLK_IGNORE_UNUSED from aclk_pcie on rk3399 clk: rockchip: add 65MHz and 106.5MHz rates to rk3399 plls used for HDMI --- 9bb87c027c3fe65f5e76c656a0d34d9980ccb121