From: H Hartley Sweeten Date: Mon, 26 Aug 2013 22:28:51 +0000 (-0700) Subject: staging: comedi: dt282x: fix dt282x_dio_insn_config() X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9b3e5aec9b275a6a7bad48f2dc2c2dcfd38a4779;p=openwrt%2Fstaging%2Fblogic.git staging: comedi: dt282x: fix dt282x_dio_insn_config() This is the (*insn_config) function for a DIO subdevice. It should be using the data[0] value as the "instruction" to perform on the subdevice. Use the comedi_dio_insn_config() helper to properly handle instructions. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/dt282x.c b/drivers/staging/comedi/drivers/dt282x.c index 4a25382e9b86..da3ee859bdbc 100644 --- a/drivers/staging/comedi/drivers/dt282x.c +++ b/drivers/staging/comedi/drivers/dt282x.c @@ -982,29 +982,32 @@ static int dt282x_dio_insn_bits(struct comedi_device *dev, static int dt282x_dio_insn_config(struct comedi_device *dev, struct comedi_subdevice *s, - struct comedi_insn *insn, unsigned int *data) + struct comedi_insn *insn, + unsigned int *data) { struct dt282x_private *devpriv = dev->private; - int mask; + unsigned int chan = CR_CHAN(insn->chanspec); + unsigned int mask; + int ret; - mask = (CR_CHAN(insn->chanspec) < 8) ? 0x00ff : 0xff00; - if (data[0]) - s->io_bits |= mask; + if (chan < 8) + mask = 0x00ff; else - s->io_bits &= ~mask; + mask = 0xff00; + + ret = comedi_dio_insn_config(dev, s, insn, data, mask); + if (ret) + return ret; + devpriv->dacsr &= ~(DT2821_LBOE | DT2821_HBOE); if (s->io_bits & 0x00ff) devpriv->dacsr |= DT2821_LBOE; - else - devpriv->dacsr &= ~DT2821_LBOE; if (s->io_bits & 0xff00) devpriv->dacsr |= DT2821_HBOE; - else - devpriv->dacsr &= ~DT2821_HBOE; outw(devpriv->dacsr, dev->iobase + DT2821_DACSR); - return 1; + return insn->n; } static const struct comedi_lrange *const ai_range_table[] = {