From: Yunhui Cui Date: Thu, 18 Aug 2016 07:37:57 +0000 (+0800) Subject: mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9b2a34906c917e6dacfa08f2eafa5beb8baff5e1;p=openwrt%2Fstaging%2Fblogic.git mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ There are some read modes for flash, such as NORMAL, FAST, QUAD, DDR QUAD. These modes will use the identical lut table base So rename SEQID_QUAD_READ to SEQID_READ. Signed-off-by: Yunhui Cui Signed-off-by: Yunhui Cui Acked-by: Han xu Signed-off-by: Cyrille Pitchen --- diff --git a/drivers/mtd/spi-nor/fsl-quadspi.c b/drivers/mtd/spi-nor/fsl-quadspi.c index c1ebefbbc145..1476135e0d50 100644 --- a/drivers/mtd/spi-nor/fsl-quadspi.c +++ b/drivers/mtd/spi-nor/fsl-quadspi.c @@ -193,7 +193,7 @@ #define QUADSPI_LUT_NUM 64 /* SEQID -- we can have 16 seqids at most. */ -#define SEQID_QUAD_READ 0 +#define SEQID_READ 0 #define SEQID_WREN 1 #define SEQID_WRDI 2 #define SEQID_RDSR 3 @@ -386,8 +386,8 @@ static void fsl_qspi_init_lut(struct fsl_qspi *q) for (i = 0; i < QUADSPI_LUT_NUM; i++) qspi_writel(q, 0, base + QUADSPI_LUT_BASE + i * 4); - /* Quad Read */ - lut_base = SEQID_QUAD_READ * 4; + /* Read */ + lut_base = SEQID_READ * 4; qspi_writel(q, LUT0(CMD, PAD1, read_op) | LUT1(ADDR, PAD1, addrlen), base + QUADSPI_LUT(lut_base)); @@ -468,7 +468,7 @@ static int fsl_qspi_get_seqid(struct fsl_qspi *q, u8 cmd) { switch (cmd) { case SPINOR_OP_READ_1_1_4: - return SEQID_QUAD_READ; + return SEQID_READ; case SPINOR_OP_WREN: return SEQID_WREN; case SPINOR_OP_WRDI: