From: H Hartley Sweeten <hsweeten@visionengravers.com>
Date: Fri, 30 Aug 2013 18:10:01 +0000 (-0700)
Subject: staging: comedi: ii_pci20kc: use comedi_dio_update_state()
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9b13bc1d4ab0c5abc1b29d4fa95a41bf02238d2a;p=openwrt%2Fstaging%2Fblogic.git

staging: comedi: ii_pci20kc: use comedi_dio_update_state()

The extra mask used to only update the channels configured as outputs is
not necessary in this driver. Remove it and use comedi_dio_update_state()
to handle the boilerplate code to update the subdevice s->state.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/staging/comedi/drivers/ii_pci20kc.c b/drivers/staging/comedi/drivers/ii_pci20kc.c
index 5c3a318b4640..8577778441fa 100644
--- a/drivers/staging/comedi/drivers/ii_pci20kc.c
+++ b/drivers/staging/comedi/drivers/ii_pci20kc.c
@@ -378,13 +378,10 @@ static int ii20k_dio_insn_bits(struct comedi_device *dev,
 			       unsigned int *data)
 {
 	struct ii20k_private *devpriv = dev->private;
-	unsigned int mask = data[0] & s->io_bits;	/* outputs only */
-	unsigned int bits = data[1];
+	unsigned int mask;
 
+	mask = comedi_dio_update_state(s, data);
 	if (mask) {
-		s->state &= ~mask;
-		s->state |= (bits & mask);
-
 		if (mask & 0x000000ff)
 			writeb((s->state >> 0) & 0xff,
 			       devpriv->ioaddr + II20K_DIO0_REG);