From: Sander Vanheule Date: Mon, 29 Aug 2022 06:23:49 +0000 (+0200) Subject: realtek: ignore disabled switch ports X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9a7f17e11f5d2c808b465bd439c7aa11c2c8dfbf;p=openwrt%2Fstaging%2Fsvanheule.git realtek: ignore disabled switch ports When marking a switch port as disabled in the device tree, by using 'status = "disabled";', the switch driver fails on boot, causing a restart: CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 802c3064, ra == 8022b4b4 [ ... ] Call Trace: [<802c3064>] strlen+0x0/0x2c [<8022b4b4>] start_creating.part.0+0x78/0x194 [<8022bd3c>] debugfs_create_dir+0x44/0x1c0 [<80396dfc>] rtl838x_dbgfs_port_init+0x54/0x258 [<80397508>] rtl838x_dbgfs_init+0xe0/0x56c This is caused by the DSA subsystem (mostly) ignoring the port, while rtl83xx_mdio_probe() still extracts some details on this disabled port from the device tree, resulting in the usage of a NULL pointer where a port name is expected. By not probing ignoring disabled ports, no attempt is made to create a debugfs directory later. The device then boots as expected without the disabled port. Signed-off-by: Sander Vanheule --- diff --git a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c index fd6019ec62..2a60f61c95 100644 --- a/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c +++ b/target/linux/realtek/files-5.10/drivers/net/dsa/rtl83xx/common.c @@ -317,6 +317,9 @@ static int __init rtl83xx_mdio_probe(struct rtl838x_switch_priv *priv) phy_interface_t interface; u32 led_set; + if (!of_device_is_available(dn)) + continue; + if (of_property_read_u32(dn, "reg", &pn)) continue;