From: Linus Torvalds Date: Wed, 15 Aug 2018 22:04:25 +0000 (-0700) Subject: Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9a76aba02a37718242d7cdc294f0a3901928aa57;p=openwrt%2Fstaging%2Fblogic.git Merge git://git./linux/kernel/git/davem/net-next Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ... --- 9a76aba02a37718242d7cdc294f0a3901928aa57 diff --cc Documentation/devicetree/bindings/net/can/xilinx_can.txt index 9264d2f6a89d,ae5c07e96ad5..060e2d46bad9 --- a/Documentation/devicetree/bindings/net/can/xilinx_can.txt +++ b/Documentation/devicetree/bindings/net/can/xilinx_can.txt @@@ -2,19 -2,26 +2,25 @@@ Xilinx Axi CAN/Zynq CANPS controller De --------------------------------------------------------- Required properties: - - compatible : Should be "xlnx,zynq-can-1.0" for Zynq CAN - controllers and "xlnx,axi-can-1.00.a" for Axi CAN - controllers. - - reg : Physical base address and size of the Axi CAN/Zynq - CANPS registers map. + - compatible : Should be: + - "xlnx,zynq-can-1.0" for Zynq CAN controllers + - "xlnx,axi-can-1.00.a" for Axi CAN controllers + - "xlnx,canfd-1.0" for CAN FD controllers + - reg : Physical base address and size of the controller + registers map. - interrupts : Property with a value describing the interrupt number. - - clock-names : List of input clock names - "can_clk", "pclk" - (For CANPS), "can_clk" , "s_axi_aclk"(For AXI CAN) -- interrupt-parent : Must be core interrupt controller + - clock-names : List of input clock names + - "can_clk", "pclk" (For CANPS), + - "can_clk", "s_axi_aclk" (For AXI CAN and CAN FD). (See clock bindings for details). - clocks : Clock phandles (see clock bindings for details). - - tx-fifo-depth : Can Tx fifo depth. - - rx-fifo-depth : Can Rx fifo depth. + - tx-fifo-depth : Can Tx fifo depth (Zynq, Axi CAN). + - rx-fifo-depth : Can Rx fifo depth (Zynq, Axi CAN, CAN FD in + sequential Rx mode). + - tx-mailbox-count : Can Tx mailbox buffer count (CAN FD). + - rx-mailbox-count : Can Rx mailbox buffer count (CAN FD in mailbox Rx + mode). Example: diff --cc Documentation/devicetree/bindings/net/stmmac.txt index 8bdb1c231d08,7f1385c4643d..cb694062afff --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@@ -1,9 -1,12 +1,10 @@@ - * STMicroelectronics 10/100/1000 Ethernet driver (GMAC) + * STMicroelectronics 10/100/1000/2500/10000 Ethernet (GMAC/XGMAC) Required properties: - - compatible: Should be "snps,dwmac-", "snps,dwmac" + - compatible: Should be "snps,dwmac-", "snps,dwmac" or + "snps,dwxgmac-", "snps,dwxgmac". For backwards compatibility: "st,spear600-gmac" is also supported. - reg: Address and length of the register set for the device -- interrupt-parent: Should be the phandle for the interrupt controller - that services interrupts for this device - interrupts: Should contain the STMMAC interrupts - interrupt-names: Should contain a list of interrupt names corresponding to the interrupts in the interrupts property, if available. diff --cc samples/bpf/Makefile index bd9f6c2a808e,f88d5683d6ee..36f9f41d094b --- a/samples/bpf/Makefile +++ b/samples/bpf/Makefile @@@ -163,12 -165,13 +165,13 @@@ always += xdp_adjust_tail_kern. always += xdpsock_kern.o always += xdp_fwd_kern.o always += task_fd_query_kern.o + always += xdp_sample_pkts_kern.o -HOSTCFLAGS += -I$(objtree)/usr/include -HOSTCFLAGS += -I$(srctree)/tools/lib/ -HOSTCFLAGS += -I$(srctree)/tools/testing/selftests/bpf/ -HOSTCFLAGS += -I$(srctree)/tools/lib/ -I$(srctree)/tools/include -HOSTCFLAGS += -I$(srctree)/tools/perf +KBUILD_HOSTCFLAGS += -I$(objtree)/usr/include +KBUILD_HOSTCFLAGS += -I$(srctree)/tools/lib/ +KBUILD_HOSTCFLAGS += -I$(srctree)/tools/testing/selftests/bpf/ +KBUILD_HOSTCFLAGS += -I$(srctree)/tools/lib/ -I$(srctree)/tools/include +KBUILD_HOSTCFLAGS += -I$(srctree)/tools/perf HOSTCFLAGS_bpf_load.o += -I$(objtree)/usr/include -Wno-unused-variable HOSTCFLAGS_trace_helpers.o += -I$(srctree)/tools/lib/bpf/ @@@ -179,13 -182,14 +182,14 @@@ HOSTCFLAGS_spintest_user.o += -I$(srctr HOSTCFLAGS_trace_event_user.o += -I$(srctree)/tools/lib/bpf/ HOSTCFLAGS_sampleip_user.o += -I$(srctree)/tools/lib/bpf/ HOSTCFLAGS_task_fd_query_user.o += -I$(srctree)/tools/lib/bpf/ + HOSTCFLAGS_xdp_sample_pkts_user.o += -I$(srctree)/tools/lib/bpf/ -HOST_LOADLIBES += $(LIBBPF) -lelf -HOSTLOADLIBES_tracex4 += -lrt -HOSTLOADLIBES_trace_output += -lrt -HOSTLOADLIBES_map_perf_test += -lrt -HOSTLOADLIBES_test_overhead += -lrt -HOSTLOADLIBES_xdpsock += -pthread +KBUILD_HOSTLDLIBS += $(LIBBPF) -lelf +HOSTLDLIBS_tracex4 += -lrt +HOSTLDLIBS_trace_output += -lrt +HOSTLDLIBS_map_perf_test += -lrt +HOSTLDLIBS_test_overhead += -lrt +HOSTLDLIBS_xdpsock += -pthread # Allows pointing LLC/CLANG to a LLVM backend with bpf support, redefine on cmdline: # make samples/bpf/ LLC=~/git/llvm/build/bin/llc CLANG=~/git/llvm/build/bin/clang