From: Nicolin Chen Date: Mon, 19 Nov 2018 20:31:16 +0000 (-0800) Subject: Documentation: hwmon: Add descriptions for ina2xx sysfs entries X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9a629d7ada78c32e2100eb5ca6a25c6248d90bd9;p=openwrt%2Fstaging%2Fblogic.git Documentation: hwmon: Add descriptions for ina2xx sysfs entries There are a few sysfs entries being exposed to user space by the ina2xx hwmon driver while not getting explicitly documented. So this patch just adds a description section for them. Signed-off-by: Nicolin Chen Signed-off-by: Guenter Roeck --- diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index b8df81f6d6bc..0f36c021192d 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -62,3 +62,18 @@ bus and shunt voltage conversion times multiplied by the averaging rate. We don't touch the conversion times and only modify the number of averages. The lower limit of the update_interval is 2 ms, the upper limit is 2253 ms. The actual programmed interval may vary from the desired value. + +General sysfs entries +------------- + +in0_input Shunt voltage(mV) channel +in1_input Bus voltage(mV) channel +curr1_input Current(mA) measurement channel +power1_input Power(uW) measurement channel +shunt_resistor Shunt resistance(uOhm) channel + +Sysfs entries for ina226, ina230 and ina231 only +------------- + +update_interval data conversion time; affects number of samples used + to average results for shunt and bus voltages.