From: Tom Rini Date: Wed, 29 May 2019 21:01:27 +0000 (-0400) Subject: arm: Remove zipitz2 board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9a4b90015a6a03c14071802f8bf49a17e0be6b16;p=project%2Fbcm63xx%2Fu-boot.git arm: Remove zipitz2 board Per discussion on the list, drop this board again. Cc: Vasily Khoruzhick Signed-off-by: Tom Rini Acked-by: Vasily Khoruzhick Reviewed-by: Jagan Teki --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 01ff57cf1b..0e82cf1583 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1410,10 +1410,6 @@ config TARGET_H2200 bool "Support h2200" select CPU_PXA -config TARGET_ZIPITZ2 - bool "Support zipitz2" - select CPU_PXA - config TARGET_COLIBRI_PXA270 bool "Support colibri_pxa270" select CPU_PXA @@ -1727,7 +1723,6 @@ source "board/woodburn/Kconfig" source "board/xilinx/Kconfig" source "board/xilinx/zynq/Kconfig" source "board/xilinx/zynqmp/Kconfig" -source "board/zipitz2/Kconfig" source "arch/arm/Kconfig.debug" diff --git a/board/zipitz2/Kconfig b/board/zipitz2/Kconfig deleted file mode 100644 index c6635040a3..0000000000 --- a/board/zipitz2/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_ZIPITZ2 - -config SYS_BOARD - default "zipitz2" - -config SYS_CONFIG_NAME - default "zipitz2" - -endif diff --git a/board/zipitz2/MAINTAINERS b/board/zipitz2/MAINTAINERS deleted file mode 100644 index e027cd361a..0000000000 --- a/board/zipitz2/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -ZIPITZ2 BOARD -M: Vasily Khoruzhick -S: Maintained -F: board/zipitz2/ -F: include/configs/zipitz2.h -F: configs/zipitz2_defconfig diff --git a/board/zipitz2/Makefile b/board/zipitz2/Makefile deleted file mode 100644 index 2bbe4364e8..0000000000 --- a/board/zipitz2/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright (C) 2009 -# Marek Vasut -# -# Heavily based on pxa255_idp platform - -obj-y := zipitz2.o diff --git a/board/zipitz2/zipitz2.c b/board/zipitz2/zipitz2.c deleted file mode 100644 index 9208c882c2..0000000000 --- a/board/zipitz2/zipitz2.c +++ /dev/null @@ -1,219 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2009 - * Marek Vasut - * - * Heavily based on pxa255_idp platform - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_CMD_SPI -void lcd_start(void); -#else -inline void lcd_start(void) {}; -#endif - -/* - * Miscelaneous platform dependent initialisations - */ -int board_init(void) -{ - /* arch number of Z2 */ - gd->bd->bi_arch_number = MACH_TYPE_ZIPIT2; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0xa0000100; - - /* Enable LCD */ - lcd_start(); - - return 0; -} - -int dram_init(void) -{ - pxa2xx_dram_init(); - gd->ram_size = PHYS_SDRAM_1_SIZE; - return 0; -} - -#ifdef CONFIG_CMD_USB -int board_usb_init(int index, enum usb_init_type init) -{ - /* enable port 2 */ - writel(readl(UP2OCR) | UP2OCR_HXOE | UP2OCR_HXS | - UP2OCR_DMPDE | UP2OCR_DPPDE, UP2OCR); - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ - return 0; -} - -void usb_board_stop(void) -{ -} -#endif - -int dram_init_banksize(void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -#ifdef CONFIG_CMD_MMC -int board_mmc_init(bd_t *bis) -{ - pxa_mmc_register(0); - return 0; -} -#endif - -#ifdef CONFIG_CMD_SPI - -struct { - unsigned char reg; - unsigned short data; - unsigned char mdelay; -} lcd_data[] = { - { 0x07, 0x0000, 0 }, - { 0x13, 0x0000, 10 }, - { 0x11, 0x3004, 0 }, - { 0x14, 0x200F, 0 }, - { 0x10, 0x1a20, 0 }, - { 0x13, 0x0040, 50 }, - { 0x13, 0x0060, 0 }, - { 0x13, 0x0070, 200 }, - { 0x01, 0x0127, 0 }, - { 0x02, 0x0700, 0 }, - { 0x03, 0x1030, 0 }, - { 0x08, 0x0208, 0 }, - { 0x0B, 0x0620, 0 }, - { 0x0C, 0x0110, 0 }, - { 0x30, 0x0120, 0 }, - { 0x31, 0x0127, 0 }, - { 0x32, 0x0000, 0 }, - { 0x33, 0x0503, 0 }, - { 0x34, 0x0727, 0 }, - { 0x35, 0x0124, 0 }, - { 0x36, 0x0706, 0 }, - { 0x37, 0x0701, 0 }, - { 0x38, 0x0F00, 0 }, - { 0x39, 0x0F00, 0 }, - { 0x40, 0x0000, 0 }, - { 0x41, 0x0000, 0 }, - { 0x42, 0x013f, 0 }, - { 0x43, 0x0000, 0 }, - { 0x44, 0x013f, 0 }, - { 0x45, 0x0000, 0 }, - { 0x46, 0xef00, 0 }, - { 0x47, 0x013f, 0 }, - { 0x48, 0x0000, 0 }, - { 0x07, 0x0015, 30 }, - { 0x07, 0x0017, 0 }, - { 0x20, 0x0000, 0 }, - { 0x21, 0x0000, 0 }, - { 0x22, 0x0000, 0 }, -}; - -void zipitz2_spi_sda(int set) -{ - /* GPIO 13 */ - if (set) - writel((1 << 13), GPSR0); - else - writel((1 << 13), GPCR0); -} - -void zipitz2_spi_scl(int set) -{ - /* GPIO 22 */ - if (set) - writel((1 << 22), GPCR0); - else - writel((1 << 22), GPSR0); -} - -unsigned char zipitz2_spi_read(void) -{ - /* GPIO 40 */ - return !!(readl(GPLR1) & (1 << 8)); -} - -int spi_cs_is_valid(unsigned int bus, unsigned int cs) -{ - /* Always valid */ - return 1; -} - -void spi_cs_activate(struct spi_slave *slave) -{ - /* GPIO 88 low */ - writel((1 << 24), GPCR2); -} - -void spi_cs_deactivate(struct spi_slave *slave) -{ - /* GPIO 88 high */ - writel((1 << 24), GPSR2); -} - -void lcd_start(void) -{ - int i; - unsigned char reg[3] = { 0x74, 0x00, 0 }; - unsigned char data[3] = { 0x76, 0, 0 }; - unsigned char dummy[3] = { 0, 0, 0 }; - - /* PWM2 AF */ - writel(readl(GAFR0_L) | 0x00800000, GAFR0_L); - /* Enable clock to all PWM */ - writel(readl(CKEN) | 0x3, CKEN); - /* Configure PWM2 */ - writel(0x4f, PWM_CTRL2); - writel(0x2ff, PWM_PWDUTY2); - writel(792, PWM_PERVAL2); - - /* Toggle the reset pin to reset the LCD */ - writel((1 << 19), GPSR0); - udelay(100000); - writel((1 << 19), GPCR0); - udelay(20000); - writel((1 << 19), GPSR0); - udelay(20000); - - /* Program the LCD init sequence */ - for (i = 0; i < sizeof(lcd_data) / sizeof(lcd_data[0]); i++) { - reg[0] = 0x74; - reg[1] = 0x0; - reg[2] = lcd_data[i].reg; - spi_xfer(NULL, 24, reg, dummy, SPI_XFER_BEGIN | SPI_XFER_END); - - data[0] = 0x76; - data[1] = lcd_data[i].data >> 8; - data[2] = lcd_data[i].data & 0xff; - spi_xfer(NULL, 24, data, dummy, SPI_XFER_BEGIN | SPI_XFER_END); - - if (lcd_data[i].mdelay) - udelay(lcd_data[i].mdelay * 1000); - } - - writel((1 << 11), GPSR0); -} -#endif diff --git a/configs/zipitz2_defconfig b/configs/zipitz2_defconfig deleted file mode 100644 index 509adcffd9..0000000000 --- a/configs/zipitz2_defconfig +++ /dev/null @@ -1,34 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_ZIPITZ2=y -CONFIG_SYS_TEXT_BASE=0x0 -CONFIG_NR_DRAM_BANKS=1 -CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=tty0 console=ttyS2,115200 fbcon=rotate:3" -# CONFIG_CONSOLE_MUX is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -# CONFIG_CMDLINE_EDITING is not set -# CONFIG_AUTO_COMPLETE is not set -CONFIG_SYS_PROMPT="$ " -CONFIG_CMD_MMC=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_ENV_IS_IN_FLASH=y -# CONFIG_NET is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_CONS_INDEX=2 -CONFIG_PXA_SERIAL=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_LCD=y -CONFIG_LZMA=y -CONFIG_OF_LIBFDT=y -# CONFIG_EFI_LOADER is not set diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h deleted file mode 100644 index 24fea68a11..0000000000 --- a/include/configs/zipitz2.h +++ /dev/null @@ -1,186 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Aeronix Zipit Z2 configuration file - * - * Copyright (C) 2009-2010 Marek Vasut - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Board Configuration Options - */ -#define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ - -#undef CONFIG_SKIP_LOWLEVEL_INIT -#define CONFIG_PREBOOT - -/* - * Environment settings - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_ADDR 0x40000 -#define CONFIG_ENV_SIZE 0x10000 - -#define CONFIG_SYS_MALLOC_LEN (128*1024) -#define CONFIG_ARCH_CPU_INIT - -#define CONFIG_BOOTCOMMAND \ - "if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\ - "then " \ - "source 0xa0000000; " \ - "else " \ - "bootm 0x50000; " \ - "fi; " -#define CONFIG_TIMESTAMP -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS - -/* - * Serial Console Configuration - * STUART - the lower serial port on Colibri board - */ -#define CONFIG_STUART 1 - -/* - * Bootloader Components Configuration - */ - -/* - * MMC Card Configuration - */ -#ifdef CONFIG_CMD_MMC -#define CONFIG_PXA_MMC_GENERIC -#define CONFIG_SYS_MMC_BASE 0xF0000000 -#endif - -/* - * SPI and LCD - */ -#ifdef CONFIG_CMD_SPI -#define CONFIG_SOFT_SPI -#define CONFIG_LCD_ROTATION -#define CONFIG_PXA_LCD -#define CONFIG_LMS283GF05 - -#define SPI_DELAY udelay(10) -#define SPI_SDA(val) zipitz2_spi_sda(val) -#define SPI_SCL(val) zipitz2_spi_scl(val) -#define SPI_READ zipitz2_spi_read() -#ifndef __ASSEMBLY__ -void zipitz2_spi_sda(int); -void zipitz2_spi_scl(int); -unsigned char zipitz2_spi_read(void); -#endif -#endif - -#define CONFIG_SYS_DEVICE_NULLDEV 1 - -/* - * Clock Configuration - */ -#define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ - -/* - * SRAM Map - */ -#define PHYS_SRAM 0x5c000000 /* SRAM Bank #1 */ -#define PHYS_SRAM_SIZE 0x00040000 /* 256k */ - -/* - * DRAM Map - */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ -#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ - -#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ -#define CONFIG_SYS_DRAM_SIZE 0x02000000 /* 32 MB DRAM */ - -#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE - -#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 -#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048) - -/* - * NOR FLASH - */ -#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ -#define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */ -#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 - -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT - -#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 -#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 240000 -#define CONFIG_SYS_FLASH_LOCK_TOUT 240000 -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 240000 - -/* - * GPIO settings - */ -#define CONFIG_SYS_GAFR0_L_VAL 0x02000140 -#define CONFIG_SYS_GAFR0_U_VAL 0x59188000 -#define CONFIG_SYS_GAFR1_L_VAL 0x63900002 -#define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950 -#define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa -#define CONFIG_SYS_GAFR2_U_VAL 0x29000308 -#define CONFIG_SYS_GAFR3_L_VAL 0x54000000 -#define CONFIG_SYS_GAFR3_U_VAL 0x000000d5 -#define CONFIG_SYS_GPCR0_VAL 0x00000000 -#define CONFIG_SYS_GPCR1_VAL 0x00000020 -#define CONFIG_SYS_GPCR2_VAL 0x00000000 -#define CONFIG_SYS_GPCR3_VAL 0x00000000 -#define CONFIG_SYS_GPDR0_VAL 0xdafcee00 -#define CONFIG_SYS_GPDR1_VAL 0xffa3aaab -#define CONFIG_SYS_GPDR2_VAL 0x8fe9ffff -#define CONFIG_SYS_GPDR3_VAL 0x001b1f8a -#define CONFIG_SYS_GPSR0_VAL 0x06080400 -#define CONFIG_SYS_GPSR1_VAL 0x007f0000 -#define CONFIG_SYS_GPSR2_VAL 0x032a0000 -#define CONFIG_SYS_GPSR3_VAL 0x00000180 - -#define CONFIG_SYS_PSSR_VAL 0x30 - -/* - * Clock settings - */ -#define CONFIG_SYS_CKEN 0x00511220 -#define CONFIG_SYS_CCCR 0x00000190 - -/* - * Memory settings - */ -#define CONFIG_SYS_MSC0_VAL 0x2ffc38f8 -#define CONFIG_SYS_MSC1_VAL 0x0000ccd1 -#define CONFIG_SYS_MSC2_VAL 0x0000b884 -#define CONFIG_SYS_MDCNFG_VAL 0x08000ba9 -#define CONFIG_SYS_MDREFR_VAL 0x2011a01e -#define CONFIG_SYS_MDMRS_VAL 0x00000000 -#define CONFIG_SYS_FLYCNFG_VAL 0x00010001 -#define CONFIG_SYS_SXCNFG_VAL 0x40044004 - -/* - * PCMCIA and CF Interfaces - */ -#define CONFIG_SYS_MECR_VAL 0x00000001 -#define CONFIG_SYS_MCMEM0_VAL 0x00014307 -#define CONFIG_SYS_MCMEM1_VAL 0x00014307 -#define CONFIG_SYS_MCATT0_VAL 0x0001c787 -#define CONFIG_SYS_MCATT1_VAL 0x0001c787 -#define CONFIG_SYS_MCIO0_VAL 0x0001430f -#define CONFIG_SYS_MCIO1_VAL 0x0001430f - -#include "pxa-common.h" - -#endif /* __CONFIG_H */