From: Sander Vanheule Date: Sat, 18 Jun 2022 13:38:37 +0000 (+0200) Subject: ath79: TP-Link EAP225-Wall v2: use pre-calibration nvmem-cell X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9a329668af0598c6e55834e61574c5087c577dcf;p=openwrt%2Fstaging%2Fjow.git ath79: TP-Link EAP225-Wall v2: use pre-calibration nvmem-cell ath10k Wave-2 hardware requires an nvmem-cell called "pre-calibration" to load the device specific caldata, not "calibration". Rename the nvmem cell node and label to match the updated cell name. Fixes: 48625a04453b ("ath79: TP-Link EAP225-Wall v1: convert radios to nvmem-cells") Signed-off-by: Sander Vanheule --- diff --git a/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts b/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts index 30c9441f12..439549d142 100644 --- a/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts +++ b/target/linux/ath79/dts/qca9561_tplink_eap225-wall-v2.dts @@ -65,8 +65,8 @@ mac-address-increment = <1>; - nvmem-cells = <&macaddr_info_8>, <&calibration_ath10k>; - nvmem-cell-names = "mac-address", "calibration"; + nvmem-cells = <&macaddr_info_8>, <&precalibration_ath10k>; + nvmem-cell-names = "mac-address", "pre-calibration"; }; }; @@ -140,7 +140,7 @@ reg = <0x1000 0x440>; }; - calibration_ath10k: calibration@5000 { + precalibration_ath10k: pre-calibration@5000 { reg = <0x5000 0x2f20>; }; };