From: Hauke Mehrtens Date: Sat, 9 Jun 2018 16:40:17 +0000 (+0200) Subject: uboot-sunxi: update Orange Pi R1 and Zero Plus X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9a26a9e8b9624d59e9d19b386d2365bb713e28b0;p=openwrt%2Fstaging%2Fluka.git uboot-sunxi: update Orange Pi R1 and Zero Plus The device tree files are now matching the kernel 4.17 and this will be send also for integration into mainline U-Boot. Signed-off-by: Hauke Mehrtens --- diff --git a/package/boot/uboot-sunxi/patches/310-sunxi-h3-Sync-OTG-and-HCI-nodes-from-Linux-DT.patch b/package/boot/uboot-sunxi/patches/310-sunxi-h3-Sync-OTG-and-HCI-nodes-from-Linux-DT.patch new file mode 100644 index 0000000000..97aad78796 --- /dev/null +++ b/package/boot/uboot-sunxi/patches/310-sunxi-h3-Sync-OTG-and-HCI-nodes-from-Linux-DT.patch @@ -0,0 +1,63 @@ +From 96c04aab58e351fa9ed7e95783018d6dbf60768f Mon Sep 17 00:00:00 2001 +From: Jun Nie +Date: Mon, 7 May 2018 13:03:40 +0530 +Subject: sunxi: h3: Sync OTG and HCI nodes from Linux DT + +Allwinner H3 have a dual-routed USB PHY0 -- routed to either OHCI/EHCI +or MUSB controller. + +Signed-off-by: Jun Nie +Reviewed-by: Jagan Teki +Acked-by: Jun Nie +--- + arch/arm/dts/sun8i-h3.dtsi | 32 ++++++++++++++++++++++++++++++++ + 1 file changed, 32 insertions(+) + +--- a/arch/arm/dts/sun8i-h3.dtsi ++++ b/arch/arm/dts/sun8i-h3.dtsi +@@ -219,6 +219,19 @@ + #size-cells = <0>; + }; + ++ usb_otg: usb@1c19000 { ++ compatible = "allwinner,sun8i-h3-musb"; ++ reg = <0x01c19000 0x400>; ++ clocks = <&ccu CLK_BUS_OTG>; ++ resets = <&ccu RST_BUS_OTG>; ++ interrupts = ; ++ interrupt-names = "mc"; ++ phys = <&usbphy 0>; ++ phy-names = "usb"; ++ extcon = <&usbphy 0>; ++ status = "disabled"; ++ }; ++ + usbphy: phy@01c19400 { + compatible = "allwinner,sun8i-h3-usb-phy"; + reg = <0x01c19400 0x2c>, +@@ -251,6 +264,25 @@ + #phy-cells = <1>; + }; + ++ ehci0: usb@1c1a000 { ++ compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; ++ reg = <0x01c1a000 0x100>; ++ interrupts = ; ++ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>; ++ resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; ++ status = "disabled"; ++ }; ++ ++ ohci0: usb@1c1a400 { ++ compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; ++ reg = <0x01c1a400 0x100>; ++ interrupts = ; ++ clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>, ++ <&ccu CLK_USB_OHCI0>; ++ resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; ++ status = "disabled"; ++ }; ++ + ehci1: usb@01c1b000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1b000 0x100>; diff --git a/package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch b/package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch index 193b2e480c..97c4769468 100644 --- a/package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch +++ b/package/boot/uboot-sunxi/patches/320-sunxi-Add-support-for-Orange-Pi-R1.patch @@ -1,18 +1,32 @@ -From 068fb0d5728c5ec93cb961718d59e7c718886edd Mon Sep 17 00:00:00 2001 +From fd3736abbe57a819312c8df96d14ec396b074581 Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Tue, 26 Sep 2017 22:16:59 +0200 -Subject: sunxi: Add support for Orange Pi R1 +Subject: sun8i: h2: Add initial Orange Pi R1 -The device tree files are also submitted for inclusion into the Linux -kernel. +Orange Pi R1 is an open-source single-board computer using the +Allwinner H2+ SOC. + +H2+ Orange Pi R1 has + - Quad-core Cortex-A7 + - 256MB DDR3 + - micrSD slot + - 128MBit SPI Nor flash + - Debug TTL UART + - 100MBit/s Ethernet (H2+) + - 100MBit/s Ethernet (RTL8152B) + - Wifi (RTL8189ETV) + - USB 2.0 OTG + power supply +This board is very similar to the Orange Pi Zero. + +The device tree file is copied from the Linux kernel 4.18. Signed-off-by: Hauke Mehrtens --- - arch/arm/dts/Makefile | 1 + - arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts | 77 ++++++++++++++++++++++++++++++ - board/sunxi/MAINTAINERS | 5 ++ - configs/orangepi_r1_defconfig | 26 ++++++++++ - 4 files changed, 109 insertions(+) + arch/arm/dts/Makefile | 1 + + arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts | 101 +++++++++++++++++++++++++++++ + board/sunxi/MAINTAINERS | 5 ++ + configs/orangepi_r1_defconfig | 16 +++++ + 4 files changed, 123 insertions(+) create mode 100644 arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts create mode 100644 configs/orangepi_r1_defconfig @@ -28,7 +42,7 @@ Signed-off-by: Hauke Mehrtens sun8i-h3-libretech-all-h3-cc.dtb \ --- /dev/null +++ b/arch/arm/dts/sun8i-h2-plus-orangepi-r1.dts -@@ -0,0 +1,91 @@ +@@ -0,0 +1,101 @@ +/* + * Copyright (C) 2017 Icenowy Zheng + * @@ -87,8 +101,8 @@ Signed-off-by: Hauke Mehrtens + */ + reg_vcc_usb_eth: reg-vcc-usb-ethernet { + compatible = "regulator-fixed"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; + regulator-name = "vcc-usb-ethernet"; + enable-active-high; + gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>; @@ -99,6 +113,16 @@ Signed-off-by: Hauke Mehrtens + }; +}; + ++/* ++&spi0 { ++ status = "okay"; ++ ++ flash@0 { ++ compatible = "mxicy,mx25l12805d", "jedec,spi-nor"; ++ }; ++}; ++*/ ++ +&ohci1 { + /* + * RTL8152B USB-Ethernet adapter is connected to USB1, @@ -136,22 +160,20 @@ Signed-off-by: Hauke Mehrtens S: Maintained --- /dev/null +++ b/configs/orangepi_r1_defconfig -@@ -0,0 +1,18 @@ +@@ -0,0 +1,16 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y -+CONFIG_SPL_SPI_FLASH_SUPPORT=y ++CONFIG_SPL=y +CONFIG_MACH_SUN8I_H3=y +CONFIG_DRAM_CLK=624 +CONFIG_DRAM_ZQ=3881979 +CONFIG_DRAM_ODT_EN=y +# CONFIG_VIDEO_DE2 is not set ++CONFIG_SPL_SPI_SUNXI=y +CONFIG_DEFAULT_DEVICE_TREE="sun8i-h2-plus-orangepi-r1" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_CONSOLE_MUX=y -+CONFIG_SPL=y -+# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set -+# CONFIG_CMD_FPGA is not set -+CONFIG_SPL_SPI_SUNXI=y +CONFIG_SUN8I_EMAC=y +CONFIG_USB_EHCI_HCD=y ++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y diff --git a/package/boot/uboot-sunxi/patches/400-ARM-dts-orange-pi-zero-plus.patch b/package/boot/uboot-sunxi/patches/400-ARM-dts-orange-pi-zero-plus.patch index 731835eb6f..e1e16d6f34 100644 --- a/package/boot/uboot-sunxi/patches/400-ARM-dts-orange-pi-zero-plus.patch +++ b/package/boot/uboot-sunxi/patches/400-ARM-dts-orange-pi-zero-plus.patch @@ -1,3 +1,34 @@ +From fd576a3c594ee2356b50a0738403e5cef094935a Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Sat, 9 Jun 2018 15:16:42 +0200 +Subject: sun50i: h5: Add initial Orange Pi Zero Plus support + +Orange Pi Zero Plus is an open-source single-board computer +using the Allwinner H5 SOC. + +H5 Orangepi Zero Plus has + - Quad-core Cortex-A53 + - 512MB DDR3 + - micrSD slot + - 16MBit SPI Nor flash + - Debug TTL UART + - 1GBit/s Ethernet (RTL8211E) + - Wifi (RTL8189FTV) + - USB 2.0 Host + - USB 2.0 OTG + power supply + +The device tree file is copied from the Linux kernel 4.18. + +Signed-off-by: Hauke Mehrtens +--- + arch/arm/dts/Makefile | 1 + + arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts | 145 ++++++++++++++++++++++++++ + board/sunxi/MAINTAINERS | 5 + + configs/orangepi_zero_plus_defconfig | 16 +++ + 4 files changed, 167 insertions(+) + create mode 100644 arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts + create mode 100644 configs/orangepi_zero_plus_defconfig + --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -372,6 +372,7 @@ dtb-$(CONFIG_MACH_SUN8I_V3S) += \ @@ -9,84 +40,36 @@ sun50i-h5-orangepi-prime.dtb \ sun50i-h5-orangepi-zero-plus2.dtb --- /dev/null -+++ b/configs/orangepi_zero_plus_defconfig -@@ -0,0 +1,19 @@ -+CONFIG_ARM=y -+CONFIG_ARCH_SUNXI=y -+CONFIG_MACH_SUN50I_H5=y -+CONFIG_DRAM_CLK=624 -+CONFIG_DRAM_ZQ=3881977 -+CONFIG_MACPWR="PD6" -+CONFIG_MMC_SUNXI_SLOT_EXTRA=2 -+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-zero-plus" -+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set -+CONFIG_SPL=y -+# CONFIG_CMD_IMLS is not set -+# CONFIG_CMD_FLASH is not set -+# CONFIG_CMD_FPGA is not set -+# CONFIG_SPL_DOS_PARTITION is not set -+# CONFIG_SPL_ISO_PARTITION is not set -+# CONFIG_SPL_EFI_PARTITION is not set -+CONFIG_SPL_SPI_SUNXI=y -+CONFIG_SUN8I_EMAC=y -+CONFIG_USB_EHCI_HCD=y ---- /dev/null +++ b/arch/arm/dts/sun50i-h5-orangepi-zero-plus.dts -@@ -0,0 +1,113 @@ +@@ -0,0 +1,145 @@ +/* -+ * Copyright (C) 2017 Antony Antony -+ * Copyright (c) 2016 ARM Ltd. -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This library is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This library is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, ++ * Copyright (C) 2016 ARM Ltd. ++ * Copyright (C) 2018 Hauke Mehrtens + * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. ++ * SPDX-License-Identifier: (GPL-2.0+ OR X11) + */ + +/dts-v1/; -+ +#include "sun50i-h5.dtsi" + +#include ++#include ++#include + +/ { + model = "Xunlong Orange Pi Zero Plus"; -+ compatible = "xunlong,orangepizero-zero-plus", "allwinner,sun50i-h5"; ++ compatible = "xunlong,orangepi-zero-plus", "allwinner,sun50i-h5"; ++ ++ reg_vcc3v3: vcc3v3 { ++ compatible = "regulator-fixed"; ++ regulator-name = "vcc3v3"; ++ regulator-min-microvolt = <3300000>; ++ regulator-max-microvolt = <3300000>; ++ }; + + aliases { ++ ethernet0 = &emac; ++ ethernet1 = &rtl8189ftv; + serial0 = &uart0; + }; + @@ -94,42 +77,93 @@ + stdout-path = "serial0:115200n8"; + }; + -+ memory { -+ reg = <0x40000000 0x40000000>; ++ leds { ++ compatible = "gpio-leds"; ++ ++ pwr { ++ label = "orangepi:green:pwr"; ++ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */ ++ default-state = "on"; ++ }; ++ ++ status { ++ label = "orangepi:red:status"; ++ gpios = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ ++ }; + }; + -+ reg_vcc3v3: vcc3v3 { ++ reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; -+ regulator-name = "vcc3v3"; ++ regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; ++ startup-delay-us = <100000>; ++ enable-active-high; ++ gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */ + }; +}; + ++&ehci0 { ++ status = "okay"; ++}; ++ +&ehci1 { + status = "okay"; +}; + -+&mmc0 { -+ compatible = "allwinner,sun50i-h5-mmc", -+ "allwinner,sun50i-a64-mmc", -+ "allwinner,sun5i-a13-mmc"; ++&emac { + pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; ++ pinctrl-0 = <&emac_rgmii_pins>; ++ phy-supply = <®_gmac_3v3>; ++ phy-handle = <&ext_rgmii_phy>; ++ phy-mode = "rgmii"; ++ status = "okay"; ++}; ++ ++&external_mdio { ++ ext_rgmii_phy: ethernet-phy@1 { ++ compatible = "ethernet-phy-ieee802.3-c22"; ++ reg = <1>; ++ }; ++}; ++ ++&mmc0 { + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; -+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; -+ cd-inverted; ++ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + -+&mmc2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc2_8bit_pins>; ++&mmc1 { + vmmc-supply = <®_vcc3v3>; -+ bus-width = <8>; ++ bus-width = <4>; + non-removable; -+ cap-mmc-hw-reset; ++ status = "okay"; ++ ++ /* ++ * Explicitly define the sdio device, so that we can add an ethernet ++ * alias for it (which e.g. makes u-boot set a mac-address). ++ */ ++ rtl8189ftv: sdio_wifi@1 { ++ reg = <1>; ++ }; ++}; ++ ++/* ++&spi0 { ++ status = "okay"; ++ ++ flash@0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "mxicy,mx25l1606e", "winbond,w25q128"; ++ reg = <0>; ++ spi-max-frequency = <40000000>; ++ }; ++}; ++*/ ++ ++&ohci0 { + status = "okay"; +}; + @@ -143,6 +177,46 @@ + status = "okay"; +}; + ++&usb_otg { ++ dr_mode = "peripheral"; ++ status = "okay"; ++}; ++ +&usbphy { ++ /* USB Type-A ports' VBUS is always on */ ++ usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + status = "okay"; +}; +--- a/board/sunxi/MAINTAINERS ++++ b/board/sunxi/MAINTAINERS +@@ -327,6 +327,11 @@ M: Icenowy Zheng + S: Maintained + F: configs/orangepi_zero_defconfig + ++ORANGEPI ZERO PLUS BOARD ++M: Hauke Mehrtens ++S: Maintained ++F: configs/orangepi_zero_plus_defconfig ++ + ORANGEPI ZERO PLUS 2 BOARD + M: Jagan Teki + S: Maintained +--- /dev/null ++++ b/configs/orangepi_zero_plus_defconfig +@@ -0,0 +1,16 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_SUNXI=y ++CONFIG_SPL=y ++CONFIG_MACH_SUN50I_H5=y ++CONFIG_DRAM_CLK=624 ++CONFIG_DRAM_ZQ=3881977 ++CONFIG_MMC0_CD_PIN="PH13" ++CONFIG_MMC_SUNXI_SLOT_EXTRA=2 ++CONFIG_DEFAULT_DEVICE_TREE="sun50i-h5-orangepi-zero-plus" ++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set ++# CONFIG_CMD_FLASH is not set ++# CONFIG_SPL_DOS_PARTITION is not set ++# CONFIG_SPL_EFI_PARTITION is not set ++CONFIG_SUN8I_EMAC=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y