From: Kyoungkyu Park Date: Sat, 13 Nov 2021 16:03:24 +0000 (+0900) Subject: ramips: add support for HUMAX E10 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9a1b9a42b793104bd65bfd292d4935b061d5da33;p=openwrt%2Fstaging%2Frobimarko.git ramips: add support for HUMAX E10 HUMAX E10 (also known as HUMAX QUANTUM E10) is a 2.4/5GHz band AC router, based on MediaTek MT7621A. Specifications: - SoC: MT7621A - RAM: DDR3 128MB - Flash: SPI NOR 16MB (MXIC MX25L12805D) - WiFi: - 2.4GHz: MT7615 - 5GHz: MT7615 - Ethernet: 2x 10/100/1000Mbps - Switch: SoC internal - USB: 1x USB 2.0 Type-A - UART: J1 (57600 8N1) - pinout: [3V3] (RXD) (GND) (TXD) Installation via web interface: - Flash **factory** image through the stock web interface. Recovery procedure: 1. Connect ethernet cable between Router **LAN** port and PC Ethernet port. 2. Set your computer to a static IP **192.168.1.1** 3. Turn the device off and wait a few seconds. Hold the WPS button on front of device and insert power. 4. Send a firmware image to **192.168.1.6** using TFTP. You can use any TFTP client. (tftp, curl, Tftpd64...) - It can accept both images which is HUMAX stock firmware dump (0x70000-0x1000000) image and OpenWRT **sysupgrade** image. Signed-off-by: Kyoungkyu Park [remove trailing whitespace] Signed-off-by: Sungbo Eo --- diff --git a/target/linux/ramips/dts/mt7621_humax_e10.dts b/target/linux/ramips/dts/mt7621_humax_e10.dts new file mode 100644 index 0000000000..41587629c0 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_humax_e10.dts @@ -0,0 +1,170 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include +#include + +/ { + compatible = "humax,e10", "mediatek,mt7621-soc"; + model = "HUMAX E10"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + label-mac-device = &wan; + }; + + gpio-export { + compatible = "gpio-export"; + + gpio-usb-power { + gpio-export,name = "power:usb"; + gpio-export,output = <1>; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "green:power"; + gpios = <&gpio 6 GPIO_ACTIVE_HIGH>; + }; + + pairing { + label = "green:pairing"; + gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + }; + + wlan { + label = "green:wlan"; + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + }; + + wps { + label = "green:wps"; + gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + wps-reset { + label = "wps_reset"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x30000>; + read-only; + }; + + partition@70000 { + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,offset = ; + openwrt,partition-magic = ; + label = "firmware"; + reg = <0x70000 0xf90000>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + ieee80211-freq-limit = <2400000 2500000>; + }; +}; + +&pcie1 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + ieee80211-freq-limit = <5000000 6000000>; + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_10007>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + wan: port@0 { + status = "okay"; + label = "wan"; + nvmem-cells = <&macaddr_factory_1000d>; + nvmem-cell-names = "mac-address"; + }; + + port@1 { + status = "okay"; + label = "lan"; + }; + }; +}; + +&state_default { + gpio { + groups = "jtag", "uart2", "uart3", "wdt"; + function = "gpio"; + }; +}; + +&factory { + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_10007: macaddr@10007 { + reg = <0x10007 0x6>; + }; + + macaddr_factory_1000d: macaddr@1000d { + reg = <0x1000d 0x6>; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 8b156c2a1c..35c5627264 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -637,6 +637,25 @@ define Device/hiwifi_hc5962 endef TARGET_DEVICES += hiwifi_hc5962 +define Device/humax_e10 + $(Device/dsa-migration) + $(Device/uimage-lzma-loader) + IMAGE_SIZE := 15936k + DEVICE_VENDOR := HUMAX + DEVICE_MODEL := E10 + DEVICE_ALT0_VENDOR := HUMAX + DEVICE_ALT0_MODEL := QUANTUM E10 + IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \ + edimax-header -s CSYS -m EA03 -f 0x70000 -S 0x01100000 | pad-rootfs | \ + check-size | append-metadata + IMAGES += factory.bin + IMAGE/factory.bin := append-kernel | append-rootfs | pad-rootfs | \ + edimax-header -s CSYS -m EA03 -f 0x70000 -S 0x01100000 | \ + check-size | zip upg -P f013c26cf0a320fb71d03356dcb6bb63 + DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware kmod-usb3 +endef +TARGET_DEVICES += humax_e10 + define Device/iodata_wn-ax1167gr $(Device/dsa-migration) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index 47f978baf8..342704ee30 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -30,6 +30,7 @@ ramips_setup_interfaces() ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan" ;; asiarf,ap7621-001|\ + humax,e10|\ winstars,ws-wn583a6) ucidef_set_interfaces_lan_wan "lan" "wan" ;;