From: Piotr Dymacz Date: Tue, 29 Jan 2019 17:12:51 +0000 (+0100) Subject: ipq40xx: add support for Macronix MX35LF1GE4AB SPI NAND X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=99f72c0d6264661873de418868de0003fef21086;p=openwrt%2Fstaging%2Flynxis.git ipq40xx: add support for Macronix MX35LF1GE4AB SPI NAND Without a proper SPI NAND support (SPI NAND framework is available in kernel >= 4.19) the only way to make such flash working is to include it in raw/parallel NAND subsystem support and combine with mt29f staging driver. Obviously, this approach isn't going to be accepted by upstream (similar support for Winbond W25N01GV was rejected). Signed-off-by: Piotr Dymacz --- diff --git a/target/linux/ipq40xx/patches-4.14/085-mtd-nand-add-macronix-mx35lf1ge4ab.patch b/target/linux/ipq40xx/patches-4.14/085-mtd-nand-add-macronix-mx35lf1ge4ab.patch new file mode 100644 index 0000000000..56316aa517 --- /dev/null +++ b/target/linux/ipq40xx/patches-4.14/085-mtd-nand-add-macronix-mx35lf1ge4ab.patch @@ -0,0 +1,13 @@ +--- a/drivers/mtd/nand/nand_ids.c ++++ b/drivers/mtd/nand/nand_ids.c +@@ -54,6 +54,10 @@ struct nand_flash_dev nand_flash_ids[] = + { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} }, + SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640, + NAND_ECC_INFO(40, SZ_1K), 4 }, ++ {"MX35LF1GE4AB 1G 3.3V 8-bit", ++ { .id = {0xc2, 0x12} }, ++ SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE, ++ 2, 64, NAND_ECC_INFO(4, SZ_512) }, + {"W25N01GV 1G 3.3V 8-bit", + { .id = {0xef, 0xaa} }, + SZ_2K, SZ_128, SZ_128K, NAND_NO_SUBPAGE_WRITE,