From: Chukun Pan <amadeus@jmu.edu.cn>
Date: Wed, 20 Dec 2023 15:15:31 +0000 (+0800)
Subject: mediatek: Cudy WR3000: simplify mac address setup
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=99bc8a9770b238fa7c8d7ecbd9a1d34edd677d47;p=openwrt%2Fstaging%2Fnbd.git

mediatek: Cudy WR3000: simplify mac address setup

The mac address of the network port under the switch is
the same as the corresponding gmac by default, so there
is no need to repeat the setting. Compile test only.

Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
---

diff --git a/target/linux/mediatek/dts/mt7981b-cudy-wr3000-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-wr3000-v1.dts
index e2fa8bf5d3..f4ba629525 100644
--- a/target/linux/mediatek/dts/mt7981b-cudy-wr3000-v1.dts
+++ b/target/linux/mediatek/dts/mt7981b-cudy-wr3000-v1.dts
@@ -10,7 +10,7 @@
 
 	aliases {
 		ethernet0 = &gmac0;
-		label-mac-device = &lan1;
+		label-mac-device = &gmac0;
 		led-boot = &led_status;
 		led-failsafe = &led_status;
 		led-running = &led_status;
@@ -238,28 +238,19 @@
 			nvmem-cells = <&macaddr_bdinfo_de00 1>;
 		};
 
-		lan1: port@1 {
+		port@1 {
 			reg = <1>;
 			label = "lan1";
-
-			nvmem-cell-names = "mac-address";
-			nvmem-cells = <&macaddr_bdinfo_de00 0>;
 		};
 
 		port@2 {
 			reg = <2>;
 			label = "lan2";
-
-			nvmem-cell-names = "mac-address";
-			nvmem-cells = <&macaddr_bdinfo_de00 0>;
 		};
 
 		port@3 {
 			reg = <3>;
 			label = "lan3";
-
-			nvmem-cell-names = "mac-address";
-			nvmem-cells = <&macaddr_bdinfo_de00 0>;
 		};
 
 		port@6 {