From: Gabor Juhos Date: Fri, 19 Nov 2010 07:24:00 +0000 (+0000) Subject: ar71xx: D-Link DIR-825 B1 eth1 MAC address is garbage X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9971dfe059eb60540332a2c695ec4ccef186ee83;p=openwrt%2Fstaging%2Fmans0n.git ar71xx: D-Link DIR-825 B1 eth1 MAC address is garbage r22700 contained a copy-and-paste error that set eth0's MAC address twice and never set eth1's. Signed-off-by: Mark Mentovai SVN-Revision: 24036 --- diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c index 5ecc47390c..3d3114689b 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-825-b1.c @@ -156,7 +156,7 @@ static void __init dir825b1_setup(void) ar71xx_eth0_data.duplex = DUPLEX_FULL; ar71xx_eth0_pll_data.pll_1000 = 0x11110000; - ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 2); + ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 2); ar71xx_eth1_data.mii_bus_dev = &dir825b1_rtl8366s_device.dev; ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ar71xx_eth1_data.phy_mask = 0x10;