From: Hamish Guthrie Date: Sun, 4 Mar 2007 17:29:44 +0000 (+0000) Subject: Added initial support for at91 plaform (HCG) X-Git-Tag: reboot~29781 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=99657a3be53db1dc4eb435de8e61eaabfd30fd50;p=openwrt%2Fstaging%2Fpepe2k.git Added initial support for at91 plaform (HCG) SVN-Revision: 6508 --- diff --git a/target/linux/at91-2.6/Makefile b/target/linux/at91-2.6/Makefile new file mode 100644 index 0000000000..982a91139f --- /dev/null +++ b/target/linux/at91-2.6/Makefile @@ -0,0 +1,24 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# +include $(TOPDIR)/rules.mk + +ARCH:=arm +BOARD:=at91 +BOARDNAME:=AT91 +FEATURES:=squashfs + +define Target/Description + Build fimware images for Figment Design Labs VersaLink board. +endef + +include $(INCLUDE_DIR)/kernel-build.mk + +#include the profiles +-include profiles/*.mk + +KERNELNAME:="uImage" +$(eval $(call BuildKernel)) diff --git a/target/linux/at91-2.6/config/default b/target/linux/at91-2.6/config/default new file mode 100644 index 0000000000..5e05d5e41d --- /dev/null +++ b/target/linux/at91-2.6/config/default @@ -0,0 +1,310 @@ +# CONFIG_AEABI is not set +CONFIG_ALIGNMENT_TRAP=y +# CONFIG_APM is not set +# CONFIG_ARCH_AAEC2000 is not set +CONFIG_ARCH_AT91=y +CONFIG_ARCH_AT91RM9200=y +# CONFIG_ARCH_AT91RM9200DK is not set +# CONFIG_ARCH_AT91SAM9260 is not set +# CONFIG_ARCH_AT91SAM9261 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_VERSATILE is not set +CONFIG_ARM=y +CONFIG_ARM_AT91_ETHER=y +CONFIG_ARM_THUMB=y +# CONFIG_ARPD is not set +# CONFIG_ARTHUR is not set +# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set +CONFIG_AT91_SPI=y +CONFIG_AT91_SPIDEV=y +# CONFIG_ATM is not set +CONFIG_BASE_SMALL=0 +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BONDING is not set +# CONFIG_BRIDGE_NF_EBTABLES is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_BT is not set +# CONFIG_CIFS is not set +# CONFIG_CLS_U32_MARK is not set +# CONFIG_CLS_U32_PERF is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_CPU_32=y +CONFIG_CPU_32v4T=y +CONFIG_CPU_ABRT_EV4T=y +CONFIG_CPU_ARM920T=y +CONFIG_CPU_CACHE_V4WT=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_COPY_V4WB=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_WRITETHROUGH is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_TLB_V4WBI=y +# CONFIG_CRC16 is not set +CONFIG_CRC32=m +# CONFIG_CRYPTO_AES is not set +CONFIG_CRYPTO_ALGAPI=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_BLKCIPHER=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_KHAZAD is not set +CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_WP512 is not set +CONFIG_DAVICOM_PHY=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_DRIVER=y +# CONFIG_DEBUG_ERRORS is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_LL is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_USER is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_DM9000 is not set +CONFIG_DNOTIFY=y +CONFIG_DUMMY_CONSOLE=y +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FIXED_PHY is not set +CONFIG_FORCED_INLINING=y +# CONFIG_FPE_FASTFPE is not set +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +CONFIG_FRAME_POINTER=y +# CONFIG_FW_LOADER is not set +# CONFIG_GENERIC_TIME is not set +# CONFIG_HAMRADIO is not set +CONFIG_HARDIRQS_SW_RESEND=y +# CONFIG_HFSPLUS_FS is not set +# CONFIG_HFS_FS is not set +CONFIG_HW_CONSOLE=y +# CONFIG_HW_RANDOM is not set +CONFIG_HZ=100 +# CONFIG_I2C is not set +# CONFIG_IEEE80211 is not set +# CONFIG_IKCONFIG is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_INOTIFY is not set +CONFIG_INPUT=y +# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_MOUSEDEV=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_IPV6 is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_NF_ARPTABLES is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +# CONFIG_IP_NF_TARGET_IMQ is not set +CONFIG_IP_NF_TARGET_LOG=y +# CONFIG_IP_NF_TARGET_NETMAP is not set +# CONFIG_IP_NF_TARGET_ROUTE is not set +# CONFIG_IP_NF_TARGET_SAME is not set +# CONFIG_IP_ROUTE_FWMARK is not set +# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +# CONFIG_ISO9660_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_LEDS is not set +# CONFIG_LIBCRC32C is not set +# CONFIG_LLC2 is not set +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_MACH_AT91RM9200EK is not set +# CONFIG_MACH_ATEB9200 is not set +# CONFIG_MACH_CARMEVA is not set +# CONFIG_MACH_CSB337 is not set +# CONFIG_MACH_CSB637 is not set +# CONFIG_MACH_KAFA is not set +# CONFIG_MACH_KB9200 is not set +# CONFIG_MACH_ONEARM is not set +CONFIG_MACH_VLINK=y +# CONFIG_MINIX_FS is not set +CONFIG_MINI_FO=y +# CONFIG_MODULE_UNLOAD is not set +# CONFIG_MSDOS_FS is not set +CONFIG_MTD=y +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_AFS_PARTS is not set +CONFIG_MTD_AT91_DATAFLASH=y +CONFIG_MTD_BLOCK=y +# CONFIG_MTD_BLOCK2MTD is not set +# CONFIG_MTD_CFI is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CHAR=y +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_DATAFLASH=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_JEDECPROBE is not set +# CONFIG_MTD_M25P80 is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +CONFIG_MTD_MAP_BANK_WIDTH_2=y +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_OBSOLETE_CHIPS is not set +# CONFIG_MTD_ONENAND is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_PLATRAM is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set +# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set +# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_HELPER is not set +CONFIG_NETFILTER_XT_MATCH_LIMIT=m +# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATE is not set +# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set +# CONFIG_NET_CLS_ACT is not set +# CONFIG_NET_CLS_IND is not set +# CONFIG_NET_CLS_RSVP6 is not set +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_IPGRE_BROADCAST is not set +# CONFIG_NET_PKTGEN is not set +# CONFIG_NET_RADIO is not set +# CONFIG_NET_SCH_NETEM is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_NFSD is not set +# CONFIG_NFS_FS is not set +# CONFIG_NLS is not set +# CONFIG_NO_IDLE_HZ is not set +# CONFIG_NTFS_FS is not set +# CONFIG_NVRAM is not set +# CONFIG_PARTITION_ADVANCED is not set +# CONFIG_PCCARD is not set +CONFIG_PHYLIB=y +# CONFIG_PM is not set +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_SYNC_TTY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_RTC_LIB=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_SCSI is not set +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_TTYAT is not set +CONFIG_SERIO=y +# CONFIG_SERIO_LIBPS2 is not set +CONFIG_SERIO_RAW=y +CONFIG_SERIO_SERPORT=y +# CONFIG_SMB_FS is not set +# CONFIG_SMC91X is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_SOUND is not set +# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +CONFIG_SPI_BITBANG=y +CONFIG_SPI_DEBUG=y +CONFIG_SPI_MASTER=y +CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_UDF_FS is not set +CONFIG_UID16=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_USB is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_VECTORS_BASE=0xffff0000 +# CONFIG_VFAT_FS is not set +# CONFIG_VGA_CONSOLE is not set +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +# CONFIG_WATCHDOG is not set +# CONFIG_XFRM_USER is not set +# CONFIG_XFS_FS is not set +# CONFIG_XIP_KERNEL is not set +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZLIB_DEFLATE=m diff --git a/target/linux/at91-2.6/image/Makefile b/target/linux/at91-2.6/image/Makefile new file mode 100644 index 0000000000..07660f2350 --- /dev/null +++ b/target/linux/at91-2.6/image/Makefile @@ -0,0 +1,36 @@ +# +# Copyright (C) 2006 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +TARGET_DEVICE_TABLE:=$(TOPDIR)/target/linux/vlink-2.6/image/device_table.txt + +include $(TOPDIR)/rules.mk +include $(INCLUDE_DIR)/image.mk + +define Build/Clean +endef + +define Image/Prepare + cp $(LINUX_DIR)/arch/arm/boot/uImage $(KDIR)/uImage +endef + +define Image/BuildKernel + cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage +endef + +define Image/Build + $(call Image/Build/$(1),$(1)) +endef + +define Image/Build/jffs2-64k + dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img bs=65536 conv=sync +endef + +define Image/Build/jffs2-128k + dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).img bs=131072 conv=sync +endef + +$(eval $(call BuildImage)) diff --git a/target/linux/at91-2.6/patches/000-at91patches.patch b/target/linux/at91-2.6/patches/000-at91patches.patch new file mode 100644 index 0000000000..a5581d2178 --- /dev/null +++ b/target/linux/at91-2.6/patches/000-at91patches.patch @@ -0,0 +1,19066 @@ +diff -urN -x CVS linux-2.6.19-final/arch/arm/Kconfig linux-2.6.19/arch/arm/Kconfig +--- linux-2.6.19-final/arch/arm/Kconfig Mon Dec 4 16:39:27 2006 ++++ linux-2.6.19/arch/arm/Kconfig Thu Nov 30 09:08:02 2006 +@@ -583,7 +591,7 @@ + ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ + ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ + ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ +- ARCH_AT91RM9200 || MACH_TRIZEPS4 ++ ARCH_AT91 || MACH_TRIZEPS4 + help + If you say Y here, the LEDs on your machine will be used + to provide useful information about your current system status. +diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/at91rm9200dk_defconfig linux-2.6.19/arch/arm/configs/at91rm9200dk_defconfig +--- linux-2.6.19-final/arch/arm/configs/at91rm9200dk_defconfig Mon Dec 4 16:39:28 2006 ++++ linux-2.6.19/arch/arm/configs/at91rm9200dk_defconfig Mon Nov 20 10:46:02 2006 +@@ -357,9 +357,9 @@ + # + # CONFIG_MTD_COMPLEX_MAPPINGS is not set + CONFIG_MTD_PHYSMAP=y +-CONFIG_MTD_PHYSMAP_START=0x10000000 +-CONFIG_MTD_PHYSMAP_LEN=0x200000 +-CONFIG_MTD_PHYSMAP_BANKWIDTH=2 ++CONFIG_MTD_PHYSMAP_START=0 ++CONFIG_MTD_PHYSMAP_LEN=0 ++CONFIG_MTD_PHYSMAP_BANKWIDTH=0 + # CONFIG_MTD_ARM_INTEGRATOR is not set + # CONFIG_MTD_IMPA7 is not set + # CONFIG_MTD_PLATRAM is not set +@@ -585,7 +585,9 @@ + # CONFIG_USBPCWATCHDOG is not set + # CONFIG_NVRAM is not set + # CONFIG_RTC is not set +-CONFIG_AT91_RTC=y ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_DRV_AT91RM9200=y + # CONFIG_DTLK is not set + # CONFIG_R3964 is not set + +diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/at91rm9200ek_defconfig linux-2.6.19/arch/arm/configs/at91rm9200ek_defconfig +--- linux-2.6.19-final/arch/arm/configs/at91rm9200ek_defconfig Mon Dec 4 16:39:28 2006 ++++ linux-2.6.19/arch/arm/configs/at91rm9200ek_defconfig Mon Nov 20 10:45:49 2006 +@@ -348,9 +348,9 @@ + # + # CONFIG_MTD_COMPLEX_MAPPINGS is not set + CONFIG_MTD_PHYSMAP=y +-CONFIG_MTD_PHYSMAP_START=0x10000000 +-CONFIG_MTD_PHYSMAP_LEN=0x800000 +-CONFIG_MTD_PHYSMAP_BANKWIDTH=2 ++CONFIG_MTD_PHYSMAP_START=0 ++CONFIG_MTD_PHYSMAP_LEN=0 ++CONFIG_MTD_PHYSMAP_BANKWIDTH=0 + # CONFIG_MTD_ARM_INTEGRATOR is not set + # CONFIG_MTD_IMPA7 is not set + # CONFIG_MTD_PLATRAM is not set +@@ -566,7 +566,9 @@ + # CONFIG_USBPCWATCHDOG is not set + # CONFIG_NVRAM is not set + # CONFIG_RTC is not set +-CONFIG_AT91_RTC=y ++CONFIG_RTC_LIB=y ++CONFIG_RTC_CLASS=y ++CONFIG_RTC_DRV_AT91RM9200=y + # CONFIG_DTLK is not set + # CONFIG_R3964 is not set + +diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/at91sam9260ek_defconfig linux-2.6.19/arch/arm/configs/at91sam9260ek_defconfig +--- linux-2.6.19-final/arch/arm/configs/at91sam9260ek_defconfig Thu Jan 1 02:00:00 1970 ++++ linux-2.6.19/arch/arm/configs/at91sam9260ek_defconfig Mon Nov 20 10:51:08 2006 +@@ -0,0 +1,950 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.19-rc6 ++# Fri Nov 17 18:42:21 2006 ++# ++CONFIG_ARM=y ++# CONFIG_GENERIC_TIME is not set ++CONFIG_MMU=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# Code maturity level options ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++ ++# ++# General setup ++# ++CONFIG_LOCALVERSION="" ++# CONFIG_LOCALVERSION_AUTO is not set ++# CONFIG_SWAP is not set ++CONFIG_SYSVIPC=y ++# CONFIG_IPC_NS is not set ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_UTS_NS is not set ++# CONFIG_AUDIT is not set ++# CONFIG_IKCONFIG is not set ++# CONFIG_RELAY is not set ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_EPOLL=y ++CONFIG_SHMEM=y ++CONFIG_SLAB=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++# CONFIG_SLOB is not set ++ ++# ++# Loadable module support ++# ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++ ++# ++# Block layer ++# ++CONFIG_BLOCK=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++# CONFIG_IOSCHED_DEADLINE is not set ++# CONFIG_IOSCHED_CFQ is not set ++CONFIG_DEFAULT_AS=y ++# CONFIG_DEFAULT_DEADLINE is not set ++# CONFIG_DEFAULT_CFQ is not set ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="anticipatory" ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++CONFIG_ARCH_AT91=y ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_CO285 is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_OMAP is not set ++ ++# ++# Atmel AT91 System-on-Chip ++# ++# CONFIG_ARCH_AT91RM9200 is not set ++CONFIG_ARCH_AT91SAM9260=y ++# CONFIG_ARCH_AT91SAM9261 is not set ++ ++# ++# AT91SAM9260 Board Type ++# ++CONFIG_MACH_AT91SAM9260EK=y ++ ++# ++# AT91 Board Options ++# ++# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set ++ ++# ++# AT91 Feature Selections ++# ++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_ARM926T=y ++CONFIG_CPU_32v5=y ++CONFIG_CPU_ABRT_EV5TJ=y ++CONFIG_CPU_CACHE_VIVT=y ++CONFIG_CPU_COPY_V4WB=y ++CONFIG_CPU_TLB_V4WBI=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++# CONFIG_ARM_THUMB is not set ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set ++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set ++ ++# ++# Bus support ++# ++ ++# ++# PCCARD (PCMCIA/CardBus) support ++# ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++# CONFIG_PREEMPT is not set ++# CONFIG_NO_IDLE_HZ is not set ++CONFIG_HZ=100 ++# CONFIG_AEABI is not set ++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++# CONFIG_SPARSEMEM_STATIC is not set ++CONFIG_SPLIT_PTLOCK_CPUS=4096 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_LEDS is not set ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" ++# CONFIG_XIP_KERNEL is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++CONFIG_FPE_NWFPE=y ++# CONFIG_FPE_NWFPE_XP is not set ++# CONFIG_FPE_FASTFPE is not set ++# CONFIG_VFP is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++# CONFIG_ARTHUR is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++# CONFIG_APM is not set ++ ++# ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_NETDEBUG is not set ++CONFIG_PACKET=y ++# CONFIG_PACKET_MMAP is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_IPV6 is not set ++# CONFIG_INET6_XFRM_TUNNEL is not set ++# CONFIG_INET6_TUNNEL is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++ ++# ++# DCCP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_DCCP is not set ++ ++# ++# SCTP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_SCTP is not set ++ ++# ++# TIPC Configuration (EXPERIMENTAL) ++# ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++ ++# ++# QoS and/or fair queueing ++# ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_IEEE80211 is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++# CONFIG_FW_LOADER is not set ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_SYS_HYPERVISOR is not set ++ ++# ++# Connector - unified userspace <-> kernelspace linker ++# ++# CONFIG_CONNECTOR is not set ++ ++# ++# Memory Technology Devices (MTD) ++# ++# CONFIG_MTD is not set ++ ++# ++# Parallel port support ++# ++# CONFIG_PARPORT is not set ++ ++# ++# Plug and Play support ++# ++ ++# ++# Block devices ++# ++# CONFIG_BLK_DEV_COW_COMMON is not set ++# CONFIG_BLK_DEV_LOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_UB is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ++CONFIG_BLK_DEV_INITRD=y ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++# CONFIG_CHR_DEV_SG is not set ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++CONFIG_SCSI_MULTI_LUN=y ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++ ++# ++# SCSI low-level drivers ++# ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++ ++# ++# Multi-device support (RAID and LVM) ++# ++# CONFIG_MD is not set ++ ++# ++# Fusion MPT device support ++# ++# CONFIG_FUSION is not set ++ ++# ++# IEEE 1394 (FireWire) support ++# ++ ++# ++# I2O device support ++# ++ ++# ++# Network device support ++# ++# CONFIG_NETDEVICES is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++ ++# ++# ISDN subsystem ++# ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++# CONFIG_INPUT_TSDEV is not set ++# CONFIG_INPUT_EVDEV is not set ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++# CONFIG_INPUT_KEYBOARD is not set ++# CONFIG_INPUT_MOUSE is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++# CONFIG_SERIO is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++# CONFIG_SERIAL_8250 is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_ATMEL=y ++CONFIG_SERIAL_ATMEL_CONSOLE=y ++# CONFIG_SERIAL_ATMEL_TTYAT is not set ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++ ++# ++# IPMI ++# ++# CONFIG_IPMI_HANDLER is not set ++ ++# ++# Watchdog Cards ++# ++CONFIG_WATCHDOG=y ++CONFIG_WATCHDOG_NOWAYOUT=y ++ ++# ++# Watchdog Device Drivers ++# ++# CONFIG_SOFT_WATCHDOG is not set ++ ++# ++# USB-based Watchdog Cards ++# ++# CONFIG_USBPCWATCHDOG is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_DTLK is not set ++# CONFIG_R3964 is not set ++ ++# ++# Ftape, the floppy tape device driver ++# ++# CONFIG_RAW_DRIVER is not set ++ ++# ++# TPM devices ++# ++# CONFIG_TCG_TPM is not set ++ ++# ++# I2C support ++# ++# CONFIG_I2C is not set ++ ++# ++# SPI support ++# ++# CONFIG_SPI is not set ++# CONFIG_SPI_MASTER is not set ++ ++# ++# Dallas's 1-wire bus ++# ++# CONFIG_W1 is not set ++ ++# ++# Hardware Monitoring support ++# ++# CONFIG_HWMON is not set ++# CONFIG_HWMON_VID is not set ++ ++# ++# Misc devices ++# ++# CONFIG_TIFM_CORE is not set ++ ++# ++# LED devices ++# ++# CONFIG_NEW_LEDS is not set ++ ++# ++# LED drivers ++# ++ ++# ++# LED Triggers ++# ++ ++# ++# Multimedia devices ++# ++# CONFIG_VIDEO_DEV is not set ++ ++# ++# Digital Video Broadcasting Devices ++# ++# CONFIG_DVB is not set ++# CONFIG_USB_DABUSB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Sound ++# ++# CONFIG_SOUND is not set ++ ++# ++# USB support ++# ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++# CONFIG_USB_BANDWIDTH is not set ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_OTG is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=y ++# CONFIG_USB_OHCI_BIG_ENDIAN is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_SL811_HCD is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++ ++# ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' ++# ++ ++# ++# may also be needed; see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++CONFIG_USB_STORAGE_DEBUG=y ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Input Devices ++# ++# CONFIG_USB_HID is not set ++ ++# ++# USB HID Boot Protocol drivers ++# ++# CONFIG_USB_KBD is not set ++# CONFIG_USB_MOUSE is not set ++# CONFIG_USB_AIPTEK is not set ++# CONFIG_USB_WACOM is not set ++# CONFIG_USB_ACECAD is not set ++# CONFIG_USB_KBTAB is not set ++# CONFIG_USB_POWERMATE is not set ++# CONFIG_USB_TOUCHSCREEN is not set ++# CONFIG_USB_YEALINK is not set ++# CONFIG_USB_XPAD is not set ++# CONFIG_USB_ATI_REMOTE is not set ++# CONFIG_USB_ATI_REMOTE2 is not set ++# CONFIG_USB_KEYSPAN_REMOTE is not set ++# CONFIG_USB_APPLETOUCH is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB Network Adapters ++# ++# CONFIG_USB_CATC is not set ++# CONFIG_USB_KAWETH is not set ++# CONFIG_USB_PEGASUS is not set ++# CONFIG_USB_RTL8150 is not set ++# CONFIG_USB_USBNET_MII is not set ++# CONFIG_USB_USBNET is not set ++CONFIG_USB_MON=y ++ ++# ++# USB port drivers ++# ++ ++# ++# USB Serial Converter support ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_AUERSWALD is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_TEST is not set ++ ++# ++# USB DSL modem support ++# ++ ++# ++# USB Gadget Support ++# ++CONFIG_USB_GADGET=y ++# CONFIG_USB_GADGET_DEBUG_FILES is not set ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_PXA2XX is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++CONFIG_USB_GADGET_AT91=y ++CONFIG_USB_AT91=y ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++# CONFIG_USB_GADGET_DUALSPEED is not set ++CONFIG_USB_ZERO=m ++# CONFIG_USB_ETH is not set ++CONFIG_USB_GADGETFS=m ++CONFIG_USB_FILE_STORAGE=m ++# CONFIG_USB_FILE_STORAGE_TEST is not set ++CONFIG_USB_G_SERIAL=m ++# CONFIG_USB_MIDI_GADGET is not set ++ ++# ++# MMC/SD Card support ++# ++# CONFIG_MMC is not set ++ ++# ++# Real Time Clock ++# ++CONFIG_RTC_LIB=y ++# CONFIG_RTC_CLASS is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++# CONFIG_EXT3_FS is not set ++# CONFIG_EXT4DEV_FS is not set ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_ROMFS_FS is not set ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++CONFIG_DNOTIFY=y ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++# CONFIG_MSDOS_FS is not set ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++CONFIG_RAMFS=y ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Network File Systems ++# ++# CONFIG_NFS_FS is not set ++# CONFIG_NFSD is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++# CONFIG_9P_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++ ++# ++# Native Language Support ++# ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++CONFIG_NLS_CODEPAGE_850=y ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++ ++# ++# Profiling support ++# ++# CONFIG_PROFILING is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_MUST_CHECK=y ++# CONFIG_MAGIC_SYSRQ is not set ++# CONFIG_UNUSED_SYMBOLS is not set ++CONFIG_DEBUG_KERNEL=y ++CONFIG_LOG_BUF_SHIFT=14 ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_DEBUG_SLAB is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_RWSEMS is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++# CONFIG_DEBUG_INFO is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_LIST is not set ++CONFIG_FRAME_POINTER=y ++CONFIG_FORCED_INLINING=y ++# CONFIG_HEADERS_CHECK is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++CONFIG_DEBUG_USER=y ++# CONFIG_DEBUG_WAITQ is not set ++# CONFIG_DEBUG_ERRORS is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++ ++# ++# Cryptographic options ++# ++# CONFIG_CRYPTO is not set ++ ++# ++# Library routines ++# ++# CONFIG_CRC_CCITT is not set ++# CONFIG_CRC16 is not set ++CONFIG_CRC32=y ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_PLIST=y +diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/at91sam9261ek_defconfig linux-2.6.19/arch/arm/configs/at91sam9261ek_defconfig +--- linux-2.6.19-final/arch/arm/configs/at91sam9261ek_defconfig Thu Jan 1 02:00:00 1970 ++++ linux-2.6.19/arch/arm/configs/at91sam9261ek_defconfig Mon Nov 20 10:51:08 2006 +@@ -0,0 +1,1106 @@ ++# ++# Automatically generated make config: don't edit ++# Linux kernel version: 2.6.19-rc6 ++# Fri Nov 17 18:00:38 2006 ++# ++CONFIG_ARM=y ++# CONFIG_GENERIC_TIME is not set ++CONFIG_MMU=y ++CONFIG_GENERIC_HARDIRQS=y ++CONFIG_TRACE_IRQFLAGS_SUPPORT=y ++CONFIG_HARDIRQS_SW_RESEND=y ++CONFIG_GENERIC_IRQ_PROBE=y ++CONFIG_RWSEM_GENERIC_SPINLOCK=y ++CONFIG_GENERIC_HWEIGHT=y ++CONFIG_GENERIC_CALIBRATE_DELAY=y ++CONFIG_VECTORS_BASE=0xffff0000 ++CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" ++ ++# ++# Code maturity level options ++# ++CONFIG_EXPERIMENTAL=y ++CONFIG_BROKEN_ON_SMP=y ++CONFIG_INIT_ENV_ARG_LIMIT=32 ++ ++# ++# General setup ++# ++CONFIG_LOCALVERSION="" ++# CONFIG_LOCALVERSION_AUTO is not set ++# CONFIG_SWAP is not set ++CONFIG_SYSVIPC=y ++# CONFIG_IPC_NS is not set ++# CONFIG_POSIX_MQUEUE is not set ++# CONFIG_BSD_PROCESS_ACCT is not set ++# CONFIG_TASKSTATS is not set ++# CONFIG_UTS_NS is not set ++# CONFIG_AUDIT is not set ++# CONFIG_IKCONFIG is not set ++# CONFIG_RELAY is not set ++CONFIG_INITRAMFS_SOURCE="" ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++CONFIG_SYSCTL=y ++# CONFIG_EMBEDDED is not set ++CONFIG_UID16=y ++CONFIG_SYSCTL_SYSCALL=y ++CONFIG_KALLSYMS=y ++# CONFIG_KALLSYMS_ALL is not set ++# CONFIG_KALLSYMS_EXTRA_PASS is not set ++CONFIG_HOTPLUG=y ++CONFIG_PRINTK=y ++CONFIG_BUG=y ++CONFIG_ELF_CORE=y ++CONFIG_BASE_FULL=y ++CONFIG_FUTEX=y ++CONFIG_EPOLL=y ++CONFIG_SHMEM=y ++CONFIG_SLAB=y ++CONFIG_VM_EVENT_COUNTERS=y ++CONFIG_RT_MUTEXES=y ++# CONFIG_TINY_SHMEM is not set ++CONFIG_BASE_SMALL=0 ++# CONFIG_SLOB is not set ++ ++# ++# Loadable module support ++# ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_MODULE_FORCE_UNLOAD is not set ++# CONFIG_MODVERSIONS is not set ++# CONFIG_MODULE_SRCVERSION_ALL is not set ++CONFIG_KMOD=y ++ ++# ++# Block layer ++# ++CONFIG_BLOCK=y ++# CONFIG_BLK_DEV_IO_TRACE is not set ++ ++# ++# IO Schedulers ++# ++CONFIG_IOSCHED_NOOP=y ++CONFIG_IOSCHED_AS=y ++# CONFIG_IOSCHED_DEADLINE is not set ++# CONFIG_IOSCHED_CFQ is not set ++CONFIG_DEFAULT_AS=y ++# CONFIG_DEFAULT_DEADLINE is not set ++# CONFIG_DEFAULT_CFQ is not set ++# CONFIG_DEFAULT_NOOP is not set ++CONFIG_DEFAULT_IOSCHED="anticipatory" ++ ++# ++# System Type ++# ++# CONFIG_ARCH_AAEC2000 is not set ++# CONFIG_ARCH_INTEGRATOR is not set ++# CONFIG_ARCH_REALVIEW is not set ++# CONFIG_ARCH_VERSATILE is not set ++CONFIG_ARCH_AT91=y ++# CONFIG_ARCH_CLPS7500 is not set ++# CONFIG_ARCH_CLPS711X is not set ++# CONFIG_ARCH_CO285 is not set ++# CONFIG_ARCH_EBSA110 is not set ++# CONFIG_ARCH_EP93XX is not set ++# CONFIG_ARCH_FOOTBRIDGE is not set ++# CONFIG_ARCH_NETX is not set ++# CONFIG_ARCH_H720X is not set ++# CONFIG_ARCH_IMX is not set ++# CONFIG_ARCH_IOP32X is not set ++# CONFIG_ARCH_IOP33X is not set ++# CONFIG_ARCH_IXP4XX is not set ++# CONFIG_ARCH_IXP2000 is not set ++# CONFIG_ARCH_IXP23XX is not set ++# CONFIG_ARCH_L7200 is not set ++# CONFIG_ARCH_PNX4008 is not set ++# CONFIG_ARCH_PXA is not set ++# CONFIG_ARCH_RPC is not set ++# CONFIG_ARCH_SA1100 is not set ++# CONFIG_ARCH_S3C2410 is not set ++# CONFIG_ARCH_SHARK is not set ++# CONFIG_ARCH_LH7A40X is not set ++# CONFIG_ARCH_OMAP is not set ++ ++# ++# Atmel AT91 System-on-Chip ++# ++# CONFIG_ARCH_AT91RM9200 is not set ++# CONFIG_ARCH_AT91SAM9260 is not set ++CONFIG_ARCH_AT91SAM9261=y ++ ++# ++# AT91SAM9261 Board Type ++# ++CONFIG_MACH_AT91SAM9261EK=y ++ ++# ++# AT91 Board Options ++# ++# CONFIG_MTD_NAND_AT91_BUSWIDTH_16 is not set ++ ++# ++# AT91 Feature Selections ++# ++# CONFIG_AT91_PROGRAMMABLE_CLOCKS is not set ++ ++# ++# Processor Type ++# ++CONFIG_CPU_32=y ++CONFIG_CPU_ARM926T=y ++CONFIG_CPU_32v5=y ++CONFIG_CPU_ABRT_EV5TJ=y ++CONFIG_CPU_CACHE_VIVT=y ++CONFIG_CPU_COPY_V4WB=y ++CONFIG_CPU_TLB_V4WBI=y ++CONFIG_CPU_CP15=y ++CONFIG_CPU_CP15_MMU=y ++ ++# ++# Processor Features ++# ++# CONFIG_ARM_THUMB is not set ++# CONFIG_CPU_ICACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_DISABLE is not set ++# CONFIG_CPU_DCACHE_WRITETHROUGH is not set ++# CONFIG_CPU_CACHE_ROUND_ROBIN is not set ++ ++# ++# Bus support ++# ++ ++# ++# PCCARD (PCMCIA/CardBus) support ++# ++# CONFIG_PCCARD is not set ++ ++# ++# Kernel Features ++# ++# CONFIG_PREEMPT is not set ++# CONFIG_NO_IDLE_HZ is not set ++CONFIG_HZ=100 ++# CONFIG_AEABI is not set ++# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set ++CONFIG_SELECT_MEMORY_MODEL=y ++CONFIG_FLATMEM_MANUAL=y ++# CONFIG_DISCONTIGMEM_MANUAL is not set ++# CONFIG_SPARSEMEM_MANUAL is not set ++CONFIG_FLATMEM=y ++CONFIG_FLAT_NODE_MEM_MAP=y ++# CONFIG_SPARSEMEM_STATIC is not set ++CONFIG_SPLIT_PTLOCK_CPUS=4096 ++# CONFIG_RESOURCES_64BIT is not set ++# CONFIG_LEDS is not set ++CONFIG_ALIGNMENT_TRAP=y ++ ++# ++# Boot options ++# ++CONFIG_ZBOOT_ROM_TEXT=0x0 ++CONFIG_ZBOOT_ROM_BSS=0x0 ++CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" ++# CONFIG_XIP_KERNEL is not set ++ ++# ++# Floating point emulation ++# ++ ++# ++# At least one emulation must be selected ++# ++CONFIG_FPE_NWFPE=y ++# CONFIG_FPE_NWFPE_XP is not set ++# CONFIG_FPE_FASTFPE is not set ++# CONFIG_VFP is not set ++ ++# ++# Userspace binary formats ++# ++CONFIG_BINFMT_ELF=y ++# CONFIG_BINFMT_AOUT is not set ++# CONFIG_BINFMT_MISC is not set ++# CONFIG_ARTHUR is not set ++ ++# ++# Power management options ++# ++# CONFIG_PM is not set ++# CONFIG_APM is not set ++ ++# ++# Networking ++# ++CONFIG_NET=y ++ ++# ++# Networking options ++# ++# CONFIG_NETDEBUG is not set ++CONFIG_PACKET=y ++# CONFIG_PACKET_MMAP is not set ++CONFIG_UNIX=y ++CONFIG_XFRM=y ++# CONFIG_XFRM_USER is not set ++# CONFIG_XFRM_SUB_POLICY is not set ++# CONFIG_NET_KEY is not set ++CONFIG_INET=y ++# CONFIG_IP_MULTICAST is not set ++# CONFIG_IP_ADVANCED_ROUTER is not set ++CONFIG_IP_FIB_HASH=y ++CONFIG_IP_PNP=y ++# CONFIG_IP_PNP_DHCP is not set ++CONFIG_IP_PNP_BOOTP=y ++# CONFIG_IP_PNP_RARP is not set ++# CONFIG_NET_IPIP is not set ++# CONFIG_NET_IPGRE is not set ++# CONFIG_ARPD is not set ++# CONFIG_SYN_COOKIES is not set ++# CONFIG_INET_AH is not set ++# CONFIG_INET_ESP is not set ++# CONFIG_INET_IPCOMP is not set ++# CONFIG_INET_XFRM_TUNNEL is not set ++# CONFIG_INET_TUNNEL is not set ++CONFIG_INET_XFRM_MODE_TRANSPORT=y ++CONFIG_INET_XFRM_MODE_TUNNEL=y ++CONFIG_INET_XFRM_MODE_BEET=y ++CONFIG_INET_DIAG=y ++CONFIG_INET_TCP_DIAG=y ++# CONFIG_TCP_CONG_ADVANCED is not set ++CONFIG_TCP_CONG_CUBIC=y ++CONFIG_DEFAULT_TCP_CONG="cubic" ++# CONFIG_IPV6 is not set ++# CONFIG_INET6_XFRM_TUNNEL is not set ++# CONFIG_INET6_TUNNEL is not set ++# CONFIG_NETWORK_SECMARK is not set ++# CONFIG_NETFILTER is not set ++ ++# ++# DCCP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_DCCP is not set ++ ++# ++# SCTP Configuration (EXPERIMENTAL) ++# ++# CONFIG_IP_SCTP is not set ++ ++# ++# TIPC Configuration (EXPERIMENTAL) ++# ++# CONFIG_TIPC is not set ++# CONFIG_ATM is not set ++# CONFIG_BRIDGE is not set ++# CONFIG_VLAN_8021Q is not set ++# CONFIG_DECNET is not set ++# CONFIG_LLC2 is not set ++# CONFIG_IPX is not set ++# CONFIG_ATALK is not set ++# CONFIG_X25 is not set ++# CONFIG_LAPB is not set ++# CONFIG_ECONET is not set ++# CONFIG_WAN_ROUTER is not set ++ ++# ++# QoS and/or fair queueing ++# ++# CONFIG_NET_SCHED is not set ++ ++# ++# Network testing ++# ++# CONFIG_NET_PKTGEN is not set ++# CONFIG_HAMRADIO is not set ++# CONFIG_IRDA is not set ++# CONFIG_BT is not set ++# CONFIG_IEEE80211 is not set ++ ++# ++# Device Drivers ++# ++ ++# ++# Generic Driver Options ++# ++CONFIG_STANDALONE=y ++CONFIG_PREVENT_FIRMWARE_BUILD=y ++# CONFIG_FW_LOADER is not set ++# CONFIG_DEBUG_DRIVER is not set ++# CONFIG_SYS_HYPERVISOR is not set ++ ++# ++# Connector - unified userspace <-> kernelspace linker ++# ++# CONFIG_CONNECTOR is not set ++ ++# ++# Memory Technology Devices (MTD) ++# ++CONFIG_MTD=y ++# CONFIG_MTD_DEBUG is not set ++# CONFIG_MTD_CONCAT is not set ++CONFIG_MTD_PARTITIONS=y ++# CONFIG_MTD_REDBOOT_PARTS is not set ++CONFIG_MTD_CMDLINE_PARTS=y ++# CONFIG_MTD_AFS_PARTS is not set ++ ++# ++# User Modules And Translation Layers ++# ++# CONFIG_MTD_CHAR is not set ++CONFIG_MTD_BLOCK=y ++# CONFIG_FTL is not set ++# CONFIG_NFTL is not set ++# CONFIG_INFTL is not set ++# CONFIG_RFD_FTL is not set ++# CONFIG_SSFDC is not set ++ ++# ++# RAM/ROM/Flash chip drivers ++# ++# CONFIG_MTD_CFI is not set ++# CONFIG_MTD_JEDECPROBE is not set ++CONFIG_MTD_MAP_BANK_WIDTH_1=y ++CONFIG_MTD_MAP_BANK_WIDTH_2=y ++CONFIG_MTD_MAP_BANK_WIDTH_4=y ++# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set ++# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set ++CONFIG_MTD_CFI_I1=y ++CONFIG_MTD_CFI_I2=y ++# CONFIG_MTD_CFI_I4 is not set ++# CONFIG_MTD_CFI_I8 is not set ++# CONFIG_MTD_RAM is not set ++# CONFIG_MTD_ROM is not set ++# CONFIG_MTD_ABSENT is not set ++# CONFIG_MTD_OBSOLETE_CHIPS is not set ++ ++# ++# Mapping drivers for chip access ++# ++# CONFIG_MTD_COMPLEX_MAPPINGS is not set ++# CONFIG_MTD_PLATRAM is not set ++ ++# ++# Self-contained MTD device drivers ++# ++# CONFIG_MTD_SLRAM is not set ++# CONFIG_MTD_PHRAM is not set ++# CONFIG_MTD_MTDRAM is not set ++# CONFIG_MTD_BLOCK2MTD is not set ++ ++# ++# Disk-On-Chip Device Drivers ++# ++# CONFIG_MTD_DOC2000 is not set ++# CONFIG_MTD_DOC2001 is not set ++# CONFIG_MTD_DOC2001PLUS is not set ++ ++# ++# NAND Flash Device Drivers ++# ++CONFIG_MTD_NAND=y ++# CONFIG_MTD_NAND_VERIFY_WRITE is not set ++# CONFIG_MTD_NAND_ECC_SMC is not set ++CONFIG_MTD_NAND_IDS=y ++# CONFIG_MTD_NAND_DISKONCHIP is not set ++CONFIG_MTD_NAND_AT91=y ++# CONFIG_MTD_NAND_NANDSIM is not set ++ ++# ++# OneNAND Flash Device Drivers ++# ++# CONFIG_MTD_ONENAND is not set ++ ++# ++# Parallel port support ++# ++# CONFIG_PARPORT is not set ++ ++# ++# Plug and Play support ++# ++ ++# ++# Block devices ++# ++# CONFIG_BLK_DEV_COW_COMMON is not set ++# CONFIG_BLK_DEV_LOOP is not set ++# CONFIG_BLK_DEV_NBD is not set ++# CONFIG_BLK_DEV_UB is not set ++CONFIG_BLK_DEV_RAM=y ++CONFIG_BLK_DEV_RAM_COUNT=16 ++CONFIG_BLK_DEV_RAM_SIZE=8192 ++CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ++CONFIG_BLK_DEV_INITRD=y ++# CONFIG_CDROM_PKTCDVD is not set ++# CONFIG_ATA_OVER_ETH is not set ++ ++# ++# SCSI device support ++# ++# CONFIG_RAID_ATTRS is not set ++CONFIG_SCSI=y ++# CONFIG_SCSI_NETLINK is not set ++CONFIG_SCSI_PROC_FS=y ++ ++# ++# SCSI support type (disk, tape, CD-ROM) ++# ++CONFIG_BLK_DEV_SD=y ++# CONFIG_CHR_DEV_ST is not set ++# CONFIG_CHR_DEV_OSST is not set ++# CONFIG_BLK_DEV_SR is not set ++# CONFIG_CHR_DEV_SG is not set ++# CONFIG_CHR_DEV_SCH is not set ++ ++# ++# Some SCSI devices (e.g. CD jukebox) support multiple LUNs ++# ++CONFIG_SCSI_MULTI_LUN=y ++# CONFIG_SCSI_CONSTANTS is not set ++# CONFIG_SCSI_LOGGING is not set ++ ++# ++# SCSI Transports ++# ++# CONFIG_SCSI_SPI_ATTRS is not set ++# CONFIG_SCSI_FC_ATTRS is not set ++# CONFIG_SCSI_ISCSI_ATTRS is not set ++# CONFIG_SCSI_SAS_ATTRS is not set ++# CONFIG_SCSI_SAS_LIBSAS is not set ++ ++# ++# SCSI low-level drivers ++# ++# CONFIG_ISCSI_TCP is not set ++# CONFIG_SCSI_DEBUG is not set ++ ++# ++# Multi-device support (RAID and LVM) ++# ++# CONFIG_MD is not set ++ ++# ++# Fusion MPT device support ++# ++# CONFIG_FUSION is not set ++ ++# ++# IEEE 1394 (FireWire) support ++# ++ ++# ++# I2O device support ++# ++ ++# ++# Network device support ++# ++CONFIG_NETDEVICES=y ++# CONFIG_DUMMY is not set ++# CONFIG_BONDING is not set ++# CONFIG_EQUALIZER is not set ++# CONFIG_TUN is not set ++ ++# ++# PHY device support ++# ++# CONFIG_PHYLIB is not set ++ ++# ++# Ethernet (10 or 100Mbit) ++# ++CONFIG_NET_ETHERNET=y ++CONFIG_MII=y ++# CONFIG_SMC91X is not set ++CONFIG_DM9000=y ++ ++# ++# Ethernet (1000 Mbit) ++# ++ ++# ++# Ethernet (10000 Mbit) ++# ++ ++# ++# Token Ring devices ++# ++ ++# ++# Wireless LAN (non-hamradio) ++# ++# CONFIG_NET_RADIO is not set ++ ++# ++# Wan interfaces ++# ++# CONFIG_WAN is not set ++# CONFIG_PPP is not set ++# CONFIG_SLIP is not set ++# CONFIG_SHAPER is not set ++# CONFIG_NETCONSOLE is not set ++# CONFIG_NETPOLL is not set ++# CONFIG_NET_POLL_CONTROLLER is not set ++ ++# ++# ISDN subsystem ++# ++# CONFIG_ISDN is not set ++ ++# ++# Input device support ++# ++CONFIG_INPUT=y ++# CONFIG_INPUT_FF_MEMLESS is not set ++ ++# ++# Userland interfaces ++# ++CONFIG_INPUT_MOUSEDEV=y ++# CONFIG_INPUT_MOUSEDEV_PSAUX is not set ++CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 ++CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 ++# CONFIG_INPUT_JOYDEV is not set ++# CONFIG_INPUT_TSDEV is not set ++# CONFIG_INPUT_EVDEV is not set ++# CONFIG_INPUT_EVBUG is not set ++ ++# ++# Input Device Drivers ++# ++# CONFIG_INPUT_KEYBOARD is not set ++# CONFIG_INPUT_MOUSE is not set ++# CONFIG_INPUT_JOYSTICK is not set ++# CONFIG_INPUT_TOUCHSCREEN is not set ++# CONFIG_INPUT_MISC is not set ++ ++# ++# Hardware I/O ports ++# ++# CONFIG_SERIO is not set ++# CONFIG_GAMEPORT is not set ++ ++# ++# Character devices ++# ++CONFIG_VT=y ++CONFIG_VT_CONSOLE=y ++CONFIG_HW_CONSOLE=y ++# CONFIG_VT_HW_CONSOLE_BINDING is not set ++# CONFIG_SERIAL_NONSTANDARD is not set ++ ++# ++# Serial drivers ++# ++# CONFIG_SERIAL_8250 is not set ++ ++# ++# Non-8250 serial port support ++# ++CONFIG_SERIAL_ATMEL=y ++CONFIG_SERIAL_ATMEL_CONSOLE=y ++# CONFIG_SERIAL_ATMEL_TTYAT is not set ++CONFIG_SERIAL_CORE=y ++CONFIG_SERIAL_CORE_CONSOLE=y ++CONFIG_UNIX98_PTYS=y ++CONFIG_LEGACY_PTYS=y ++CONFIG_LEGACY_PTY_COUNT=256 ++ ++# ++# IPMI ++# ++# CONFIG_IPMI_HANDLER is not set ++ ++# ++# Watchdog Cards ++# ++CONFIG_WATCHDOG=y ++CONFIG_WATCHDOG_NOWAYOUT=y ++ ++# ++# Watchdog Device Drivers ++# ++# CONFIG_SOFT_WATCHDOG is not set ++ ++# ++# USB-based Watchdog Cards ++# ++# CONFIG_USBPCWATCHDOG is not set ++CONFIG_HW_RANDOM=y ++# CONFIG_NVRAM is not set ++# CONFIG_DTLK is not set ++# CONFIG_R3964 is not set ++ ++# ++# Ftape, the floppy tape device driver ++# ++# CONFIG_RAW_DRIVER is not set ++ ++# ++# TPM devices ++# ++# CONFIG_TCG_TPM is not set ++ ++# ++# I2C support ++# ++CONFIG_I2C=y ++CONFIG_I2C_CHARDEV=y ++ ++# ++# I2C Algorithms ++# ++# CONFIG_I2C_ALGOBIT is not set ++# CONFIG_I2C_ALGOPCF is not set ++# CONFIG_I2C_ALGOPCA is not set ++ ++# ++# I2C Hardware Bus support ++# ++CONFIG_I2C_AT91=y ++# CONFIG_I2C_OCORES is not set ++# CONFIG_I2C_PARPORT_LIGHT is not set ++# CONFIG_I2C_STUB is not set ++# CONFIG_I2C_PCA is not set ++# CONFIG_I2C_PCA_ISA is not set ++ ++# ++# Miscellaneous I2C Chip support ++# ++# CONFIG_SENSORS_DS1337 is not set ++# CONFIG_SENSORS_DS1374 is not set ++# CONFIG_SENSORS_EEPROM is not set ++# CONFIG_SENSORS_PCF8574 is not set ++# CONFIG_SENSORS_PCA9539 is not set ++# CONFIG_SENSORS_PCF8591 is not set ++# CONFIG_SENSORS_MAX6875 is not set ++# CONFIG_I2C_DEBUG_CORE is not set ++# CONFIG_I2C_DEBUG_ALGO is not set ++# CONFIG_I2C_DEBUG_BUS is not set ++# CONFIG_I2C_DEBUG_CHIP is not set ++ ++# ++# SPI support ++# ++# CONFIG_SPI is not set ++# CONFIG_SPI_MASTER is not set ++ ++# ++# Dallas's 1-wire bus ++# ++# CONFIG_W1 is not set ++ ++# ++# Hardware Monitoring support ++# ++# CONFIG_HWMON is not set ++# CONFIG_HWMON_VID is not set ++ ++# ++# Misc devices ++# ++# CONFIG_TIFM_CORE is not set ++ ++# ++# LED devices ++# ++# CONFIG_NEW_LEDS is not set ++ ++# ++# LED drivers ++# ++ ++# ++# LED Triggers ++# ++ ++# ++# Multimedia devices ++# ++# CONFIG_VIDEO_DEV is not set ++ ++# ++# Digital Video Broadcasting Devices ++# ++# CONFIG_DVB is not set ++# CONFIG_USB_DABUSB is not set ++ ++# ++# Graphics support ++# ++# CONFIG_FIRMWARE_EDID is not set ++# CONFIG_FB is not set ++ ++# ++# Console display driver support ++# ++# CONFIG_VGA_CONSOLE is not set ++CONFIG_DUMMY_CONSOLE=y ++# CONFIG_BACKLIGHT_LCD_SUPPORT is not set ++ ++# ++# Sound ++# ++# CONFIG_SOUND is not set ++ ++# ++# USB support ++# ++CONFIG_USB_ARCH_HAS_HCD=y ++CONFIG_USB_ARCH_HAS_OHCI=y ++# CONFIG_USB_ARCH_HAS_EHCI is not set ++CONFIG_USB=y ++# CONFIG_USB_DEBUG is not set ++ ++# ++# Miscellaneous USB options ++# ++CONFIG_USB_DEVICEFS=y ++# CONFIG_USB_BANDWIDTH is not set ++# CONFIG_USB_DYNAMIC_MINORS is not set ++# CONFIG_USB_OTG is not set ++ ++# ++# USB Host Controller Drivers ++# ++# CONFIG_USB_ISP116X_HCD is not set ++CONFIG_USB_OHCI_HCD=y ++# CONFIG_USB_OHCI_BIG_ENDIAN is not set ++CONFIG_USB_OHCI_LITTLE_ENDIAN=y ++# CONFIG_USB_SL811_HCD is not set ++ ++# ++# USB Device Class drivers ++# ++# CONFIG_USB_ACM is not set ++# CONFIG_USB_PRINTER is not set ++ ++# ++# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' ++# ++ ++# ++# may also be needed; see USB_STORAGE Help for more information ++# ++CONFIG_USB_STORAGE=y ++CONFIG_USB_STORAGE_DEBUG=y ++# CONFIG_USB_STORAGE_DATAFAB is not set ++# CONFIG_USB_STORAGE_FREECOM is not set ++# CONFIG_USB_STORAGE_DPCM is not set ++# CONFIG_USB_STORAGE_USBAT is not set ++# CONFIG_USB_STORAGE_SDDR09 is not set ++# CONFIG_USB_STORAGE_SDDR55 is not set ++# CONFIG_USB_STORAGE_JUMPSHOT is not set ++# CONFIG_USB_STORAGE_ALAUDA is not set ++# CONFIG_USB_STORAGE_KARMA is not set ++# CONFIG_USB_LIBUSUAL is not set ++ ++# ++# USB Input Devices ++# ++# CONFIG_USB_HID is not set ++ ++# ++# USB HID Boot Protocol drivers ++# ++# CONFIG_USB_KBD is not set ++# CONFIG_USB_MOUSE is not set ++# CONFIG_USB_AIPTEK is not set ++# CONFIG_USB_WACOM is not set ++# CONFIG_USB_ACECAD is not set ++# CONFIG_USB_KBTAB is not set ++# CONFIG_USB_POWERMATE is not set ++# CONFIG_USB_TOUCHSCREEN is not set ++# CONFIG_USB_YEALINK is not set ++# CONFIG_USB_XPAD is not set ++# CONFIG_USB_ATI_REMOTE is not set ++# CONFIG_USB_ATI_REMOTE2 is not set ++# CONFIG_USB_KEYSPAN_REMOTE is not set ++# CONFIG_USB_APPLETOUCH is not set ++ ++# ++# USB Imaging devices ++# ++# CONFIG_USB_MDC800 is not set ++# CONFIG_USB_MICROTEK is not set ++ ++# ++# USB Network Adapters ++# ++# CONFIG_USB_CATC is not set ++# CONFIG_USB_KAWETH is not set ++# CONFIG_USB_PEGASUS is not set ++# CONFIG_USB_RTL8150 is not set ++# CONFIG_USB_USBNET_MII is not set ++# CONFIG_USB_USBNET is not set ++CONFIG_USB_MON=y ++ ++# ++# USB port drivers ++# ++ ++# ++# USB Serial Converter support ++# ++# CONFIG_USB_SERIAL is not set ++ ++# ++# USB Miscellaneous drivers ++# ++# CONFIG_USB_EMI62 is not set ++# CONFIG_USB_EMI26 is not set ++# CONFIG_USB_ADUTUX is not set ++# CONFIG_USB_AUERSWALD is not set ++# CONFIG_USB_RIO500 is not set ++# CONFIG_USB_LEGOTOWER is not set ++# CONFIG_USB_LCD is not set ++# CONFIG_USB_LED is not set ++# CONFIG_USB_CYPRESS_CY7C63 is not set ++# CONFIG_USB_CYTHERM is not set ++# CONFIG_USB_PHIDGET is not set ++# CONFIG_USB_IDMOUSE is not set ++# CONFIG_USB_FTDI_ELAN is not set ++# CONFIG_USB_APPLEDISPLAY is not set ++# CONFIG_USB_LD is not set ++# CONFIG_USB_TRANCEVIBRATOR is not set ++# CONFIG_USB_TEST is not set ++ ++# ++# USB DSL modem support ++# ++ ++# ++# USB Gadget Support ++# ++CONFIG_USB_GADGET=y ++# CONFIG_USB_GADGET_DEBUG_FILES is not set ++CONFIG_USB_GADGET_SELECTED=y ++# CONFIG_USB_GADGET_NET2280 is not set ++# CONFIG_USB_GADGET_PXA2XX is not set ++# CONFIG_USB_GADGET_GOKU is not set ++# CONFIG_USB_GADGET_LH7A40X is not set ++# CONFIG_USB_GADGET_OMAP is not set ++CONFIG_USB_GADGET_AT91=y ++CONFIG_USB_AT91=y ++# CONFIG_USB_GADGET_DUMMY_HCD is not set ++# CONFIG_USB_GADGET_DUALSPEED is not set ++CONFIG_USB_ZERO=m ++# CONFIG_USB_ETH is not set ++CONFIG_USB_GADGETFS=m ++CONFIG_USB_FILE_STORAGE=m ++# CONFIG_USB_FILE_STORAGE_TEST is not set ++CONFIG_USB_G_SERIAL=m ++# CONFIG_USB_MIDI_GADGET is not set ++ ++# ++# MMC/SD Card support ++# ++CONFIG_MMC=y ++# CONFIG_MMC_DEBUG is not set ++CONFIG_MMC_BLOCK=y ++CONFIG_MMC_AT91=m ++# CONFIG_MMC_TIFM_SD is not set ++ ++# ++# Real Time Clock ++# ++CONFIG_RTC_LIB=y ++# CONFIG_RTC_CLASS is not set ++ ++# ++# File systems ++# ++CONFIG_EXT2_FS=y ++# CONFIG_EXT2_FS_XATTR is not set ++# CONFIG_EXT2_FS_XIP is not set ++# CONFIG_EXT3_FS is not set ++# CONFIG_EXT4DEV_FS is not set ++# CONFIG_REISERFS_FS is not set ++# CONFIG_JFS_FS is not set ++# CONFIG_FS_POSIX_ACL is not set ++# CONFIG_XFS_FS is not set ++# CONFIG_GFS2_FS is not set ++# CONFIG_OCFS2_FS is not set ++# CONFIG_MINIX_FS is not set ++# CONFIG_ROMFS_FS is not set ++CONFIG_INOTIFY=y ++CONFIG_INOTIFY_USER=y ++# CONFIG_QUOTA is not set ++CONFIG_DNOTIFY=y ++# CONFIG_AUTOFS_FS is not set ++# CONFIG_AUTOFS4_FS is not set ++# CONFIG_FUSE_FS is not set ++ ++# ++# CD-ROM/DVD Filesystems ++# ++# CONFIG_ISO9660_FS is not set ++# CONFIG_UDF_FS is not set ++ ++# ++# DOS/FAT/NT Filesystems ++# ++CONFIG_FAT_FS=y ++# CONFIG_MSDOS_FS is not set ++CONFIG_VFAT_FS=y ++CONFIG_FAT_DEFAULT_CODEPAGE=437 ++CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" ++# CONFIG_NTFS_FS is not set ++ ++# ++# Pseudo filesystems ++# ++CONFIG_PROC_FS=y ++CONFIG_PROC_SYSCTL=y ++CONFIG_SYSFS=y ++CONFIG_TMPFS=y ++# CONFIG_TMPFS_POSIX_ACL is not set ++# CONFIG_HUGETLB_PAGE is not set ++CONFIG_RAMFS=y ++# CONFIG_CONFIGFS_FS is not set ++ ++# ++# Miscellaneous filesystems ++# ++# CONFIG_ADFS_FS is not set ++# CONFIG_AFFS_FS is not set ++# CONFIG_HFS_FS is not set ++# CONFIG_HFSPLUS_FS is not set ++# CONFIG_BEFS_FS is not set ++# CONFIG_BFS_FS is not set ++# CONFIG_EFS_FS is not set ++# CONFIG_JFFS_FS is not set ++# CONFIG_JFFS2_FS is not set ++CONFIG_CRAMFS=y ++# CONFIG_VXFS_FS is not set ++# CONFIG_HPFS_FS is not set ++# CONFIG_QNX4FS_FS is not set ++# CONFIG_SYSV_FS is not set ++# CONFIG_UFS_FS is not set ++ ++# ++# Network File Systems ++# ++# CONFIG_NFS_FS is not set ++# CONFIG_NFSD is not set ++# CONFIG_SMB_FS is not set ++# CONFIG_CIFS is not set ++# CONFIG_NCP_FS is not set ++# CONFIG_CODA_FS is not set ++# CONFIG_AFS_FS is not set ++# CONFIG_9P_FS is not set ++ ++# ++# Partition Types ++# ++# CONFIG_PARTITION_ADVANCED is not set ++CONFIG_MSDOS_PARTITION=y ++ ++# ++# Native Language Support ++# ++CONFIG_NLS=y ++CONFIG_NLS_DEFAULT="iso8859-1" ++CONFIG_NLS_CODEPAGE_437=y ++# CONFIG_NLS_CODEPAGE_737 is not set ++# CONFIG_NLS_CODEPAGE_775 is not set ++CONFIG_NLS_CODEPAGE_850=y ++# CONFIG_NLS_CODEPAGE_852 is not set ++# CONFIG_NLS_CODEPAGE_855 is not set ++# CONFIG_NLS_CODEPAGE_857 is not set ++# CONFIG_NLS_CODEPAGE_860 is not set ++# CONFIG_NLS_CODEPAGE_861 is not set ++# CONFIG_NLS_CODEPAGE_862 is not set ++# CONFIG_NLS_CODEPAGE_863 is not set ++# CONFIG_NLS_CODEPAGE_864 is not set ++# CONFIG_NLS_CODEPAGE_865 is not set ++# CONFIG_NLS_CODEPAGE_866 is not set ++# CONFIG_NLS_CODEPAGE_869 is not set ++# CONFIG_NLS_CODEPAGE_936 is not set ++# CONFIG_NLS_CODEPAGE_950 is not set ++# CONFIG_NLS_CODEPAGE_932 is not set ++# CONFIG_NLS_CODEPAGE_949 is not set ++# CONFIG_NLS_CODEPAGE_874 is not set ++# CONFIG_NLS_ISO8859_8 is not set ++# CONFIG_NLS_CODEPAGE_1250 is not set ++# CONFIG_NLS_CODEPAGE_1251 is not set ++# CONFIG_NLS_ASCII is not set ++CONFIG_NLS_ISO8859_1=y ++# CONFIG_NLS_ISO8859_2 is not set ++# CONFIG_NLS_ISO8859_3 is not set ++# CONFIG_NLS_ISO8859_4 is not set ++# CONFIG_NLS_ISO8859_5 is not set ++# CONFIG_NLS_ISO8859_6 is not set ++# CONFIG_NLS_ISO8859_7 is not set ++# CONFIG_NLS_ISO8859_9 is not set ++# CONFIG_NLS_ISO8859_13 is not set ++# CONFIG_NLS_ISO8859_14 is not set ++# CONFIG_NLS_ISO8859_15 is not set ++# CONFIG_NLS_KOI8_R is not set ++# CONFIG_NLS_KOI8_U is not set ++# CONFIG_NLS_UTF8 is not set ++ ++# ++# Profiling support ++# ++# CONFIG_PROFILING is not set ++ ++# ++# Kernel hacking ++# ++# CONFIG_PRINTK_TIME is not set ++CONFIG_ENABLE_MUST_CHECK=y ++# CONFIG_MAGIC_SYSRQ is not set ++# CONFIG_UNUSED_SYMBOLS is not set ++CONFIG_DEBUG_KERNEL=y ++CONFIG_LOG_BUF_SHIFT=14 ++CONFIG_DETECT_SOFTLOCKUP=y ++# CONFIG_SCHEDSTATS is not set ++# CONFIG_DEBUG_SLAB is not set ++# CONFIG_DEBUG_RT_MUTEXES is not set ++# CONFIG_RT_MUTEX_TESTER is not set ++# CONFIG_DEBUG_SPINLOCK is not set ++# CONFIG_DEBUG_MUTEXES is not set ++# CONFIG_DEBUG_RWSEMS is not set ++# CONFIG_DEBUG_SPINLOCK_SLEEP is not set ++# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set ++# CONFIG_DEBUG_KOBJECT is not set ++CONFIG_DEBUG_BUGVERBOSE=y ++# CONFIG_DEBUG_INFO is not set ++# CONFIG_DEBUG_FS is not set ++# CONFIG_DEBUG_VM is not set ++# CONFIG_DEBUG_LIST is not set ++CONFIG_FRAME_POINTER=y ++CONFIG_FORCED_INLINING=y ++# CONFIG_HEADERS_CHECK is not set ++# CONFIG_RCU_TORTURE_TEST is not set ++CONFIG_DEBUG_USER=y ++# CONFIG_DEBUG_WAITQ is not set ++# CONFIG_DEBUG_ERRORS is not set ++CONFIG_DEBUG_LL=y ++# CONFIG_DEBUG_ICEDCC is not set ++ ++# ++# Security options ++# ++# CONFIG_KEYS is not set ++# CONFIG_SECURITY is not set ++ ++# ++# Cryptographic options ++# ++# CONFIG_CRYPTO is not set ++ ++# ++# Library routines ++# ++# CONFIG_CRC_CCITT is not set ++# CONFIG_CRC16 is not set ++CONFIG_CRC32=y ++# CONFIG_LIBCRC32C is not set ++CONFIG_ZLIB_INFLATE=y ++CONFIG_PLIST=y +diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/carmeva_defconfig linux-2.6.19/arch/arm/configs/carmeva_defconfig +--- linux-2.6.19-final/arch/arm/configs/carmeva_defconfig Mon Dec 4 16:39:29 2006 ++++ linux-2.6.19/arch/arm/configs/carmeva_defconfig Thu Oct 12 17:07:38 2006 +@@ -474,7 +474,7 @@ + # CONFIG_WATCHDOG is not set + # CONFIG_NVRAM is not set + # CONFIG_RTC is not set +-# CONFIG_AT91_RTC is not set ++# CONFIG_AT91RM9200_RTC is not set + # CONFIG_DTLK is not set + # CONFIG_R3964 is not set + +diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/csb637_defconfig linux-2.6.19/arch/arm/configs/csb637_defconfig +--- linux-2.6.19-final/arch/arm/configs/csb637_defconfig Mon Dec 4 16:39:29 2006 ++++ linux-2.6.19/arch/arm/configs/csb637_defconfig Thu Oct 12 17:07:38 2006 +@@ -623,7 +623,7 @@ + # CONFIG_USBPCWATCHDOG is not set + # CONFIG_NVRAM is not set + CONFIG_RTC=y +-# CONFIG_AT91_RTC is not set ++# CONFIG_AT91RM9200_RTC is not set + # CONFIG_DTLK is not set + # CONFIG_R3964 is not set + +diff -urN -x CVS linux-2.6.19-final/arch/arm/configs/kb9202_defconfig linux-2.6.19/arch/arm/configs/kb9202_defconfig +--- linux-2.6.19-final/arch/arm/configs/kb9202_defconfig Mon Dec 4 16:39:29 2006 ++++ linux-2.6.19/arch/arm/configs/kb9202_defconfig Thu Oct 12 17:07:38 2006 +@@ -437,7 +437,7 @@ + # CONFIG_WATCHDOG is not set + # CONFIG_NVRAM is not set + # CONFIG_RTC is not set +-# CONFIG_AT91_RTC is not set ++# CONFIG_AT91RM9200_RTC is not set + # CONFIG_DTLK is not set + # CONFIG_R3964 is not set + +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/Kconfig linux-2.6.19/arch/arm/mach-at91rm9200/Kconfig +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/Kconfig Mon Dec 4 16:32:44 2006 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/Kconfig Wed Nov 22 09:24:11 2006 +@@ -2,7 +2,8 @@ + + menu "Atmel AT91 System-on-Chip" + +-comment "Atmel AT91 Processors" ++choice ++ prompt "Atmel AT91 Processor" + + config ARCH_AT91RM9200 + bool "AT91RM9200" +@@ -13,6 +14,8 @@ + config ARCH_AT91SAM9261 + bool "AT91SAM9261" + ++endchoice ++ + # ---------------------------------------------------------- + + if ARCH_AT91RM9200 +@@ -33,7 +36,6 @@ + Select this if you are using Atmel's AT91RM9200-DK Development board. + (Discontinued) + +- + config MACH_AT91RM9200EK + bool "Atmel AT91RM9200-EK Evaluation Kit" + depends on ARCH_AT91RM9200 +@@ -90,6 +92,13 @@ + + comment "AT91SAM9260 Board Type" + ++config MACH_AT91SAM9260EK ++ bool "Atmel AT91SAM9260-EK Evaluation Kit" ++ depends on ARCH_AT91SAM9260 ++ help ++ Select this if you are using Atmel's AT91SAM9260-EK Evaluation Kit. ++ ++ + endif + + # ---------------------------------------------------------- +@@ -98,8 +107,31 @@ + + comment "AT91SAM9261 Board Type" + ++config MACH_AT91SAM9261EK ++ bool "Atmel AT91SAM9261-EK Evaluation Kit" ++ depends on ARCH_AT91SAM9261 ++ help ++ Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. ++ ++ + endif + ++# ---------------------------------------------------------- ++ ++comment "AT91 Board Options" ++ ++config MTD_AT91_DATAFLASH_CARD ++ bool "Enable DataFlash Card support" ++ depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK) ++ help ++ Enable support for the DataFlash card. ++ ++config MTD_NAND_AT91_BUSWIDTH_16 ++ bool "Enable 16-bit data bus interface to NAND flash" ++ depends on (MACH_AT91SAM9261EK || MACH_AT91SAM9260EK) ++ help ++ On AT91SAM926x boards both types of NAND flash can be present ++ (8 and 16 bit data bus width). + + # ---------------------------------------------------------- + +@@ -111,6 +143,13 @@ + Select this if you need to program one or more of the PCK0..PCK3 + programmable clock outputs. + ++config AT91_SLOW_CLOCK ++ bool "Suspend-to-RAM uses slow clock mode (EXPERIMENTAL)" ++ depends on PM && EXPERIMENTAL ++ help ++ Select this if you wish to put the CPU into slow clock mode ++ while in the "Suspend to RAM" state, to save more power. ++ + endmenu + + endif +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/Makefile linux-2.6.19/arch/arm/mach-at91rm9200/Makefile +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/Makefile Mon Dec 4 16:32:44 2006 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/Makefile Thu Nov 16 11:45:54 2006 +@@ -2,19 +2,20 @@ + # Makefile for the linux kernel. + # + +-obj-y := clock.o irq.o gpio.o devices.o ++obj-y := clock.o irq.o gpio.o + obj-m := + obj-n := + obj- := + + obj-$(CONFIG_PM) += pm.o ++obj-$(CONFIG_AT91_SLOW_CLOCK) += pm_slowclock.o + + # CPU-specific support +-obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o +-obj-$(CONFIG_ARCH_AT91SAM9260) += +-obj-$(CONFIG_ARCH_AT91SAM9261) += ++obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o ++obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o ++obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o + +-# AT91RM9200 Board-specific support ++# AT91RM9200 board-specific support + obj-$(CONFIG_MACH_ONEARM) += board-1arm.o + obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o + obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o +@@ -26,8 +27,10 @@ + obj-$(CONFIG_MACH_KAFA) += board-kafa.o + + # AT91SAM9260 board-specific support ++obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o + + # AT91SAM9261 board-specific support ++obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o + + # LEDs support + led-$(CONFIG_ARCH_AT91RM9200DK) += leds.o +@@ -39,7 +42,7 @@ + obj-$(CONFIG_LEDS) += $(led-y) + + # VGA support +-#obj-$(CONFIG_FB_S1D13XXX) += ics1523.o ++obj-$(CONFIG_FB_S1D13XXX) += ics1523.o + + + ifeq ($(CONFIG_PM_DEBUG),y) +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200.c linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200.c +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200.c Mon Dec 4 16:39:29 2006 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200.c Fri Nov 3 19:22:15 2006 +@@ -14,8 +14,10 @@ + + #include + #include ++#include ++#include ++#include + +-#include + #include "generic.h" + #include "clock.h" + +@@ -26,32 +28,12 @@ + .length = SZ_4K, + .type = MT_DEVICE, + }, { +- .virtual = AT91_VA_BASE_SPI, +- .pfn = __phys_to_pfn(AT91RM9200_BASE_SPI), +- .length = SZ_16K, +- .type = MT_DEVICE, +- }, { + .virtual = AT91_VA_BASE_EMAC, + .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC), + .length = SZ_16K, + .type = MT_DEVICE, + }, { +- .virtual = AT91_VA_BASE_TWI, +- .pfn = __phys_to_pfn(AT91RM9200_BASE_TWI), +- .length = SZ_16K, +- .type = MT_DEVICE, +- }, { +- .virtual = AT91_VA_BASE_MCI, +- .pfn = __phys_to_pfn(AT91RM9200_BASE_MCI), +- .length = SZ_16K, +- .type = MT_DEVICE, +- }, { +- .virtual = AT91_VA_BASE_UDP, +- .pfn = __phys_to_pfn(AT91RM9200_BASE_UDP), +- .length = SZ_16K, +- .type = MT_DEVICE, +- }, { +- .virtual = AT91_SRAM_VIRT_BASE, ++ .virtual = AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE, + .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE), + .length = AT91RM9200_SRAM_SIZE, + .type = MT_DEVICE, +@@ -222,6 +204,16 @@ + } + }; + ++static void at91rm9200_reset(void) ++{ ++ /* ++ * Perform a hardware reset with the use of the Watchdog timer. ++ */ ++ at91_sys_write(AT91_ST_WDMR, AT91_ST_RSTEN | AT91_ST_EXTEN | 1); ++ at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); ++} ++ ++ + /* -------------------------------------------------------------------- + * AT91RM9200 processor initialization + * -------------------------------------------------------------------- */ +@@ -230,6 +222,12 @@ + /* Map peripherals */ + iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); + ++ at91_arch_reset = at91rm9200_reset; ++ at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) ++ | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) ++ | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5) ++ | (1 << AT91RM9200_ID_IRQ6); ++ + /* Init clock subsystem */ + at91_clock_init(main_clock); + +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200_devices.c linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200_devices.c +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200_devices.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200_devices.c Fri Dec 1 16:10:47 2006 +@@ -0,0 +1,901 @@ ++/* ++ * arch/arm/mach-at91rm9200/at91rm9200_devices.c ++ * ++ * Copyright (C) 2005 Thibaut VARENE ++ * Copyright (C) 2005 David Brownell ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ */ ++#include ++#include ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "generic.h" ++ ++#define SZ_512 0x00000200 ++#define SZ_256 0x00000100 ++#define SZ_16 0x00000010 ++ ++/* -------------------------------------------------------------------- ++ * USB Host ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) ++static u64 ohci_dmamask = 0xffffffffUL; ++static struct at91_usbh_data usbh_data; ++ ++static struct resource usbh_resources[] = { ++ [0] = { ++ .start = AT91RM9200_UHP_BASE, ++ .end = AT91RM9200_UHP_BASE + SZ_1M - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91RM9200_ID_UHP, ++ .end = AT91RM9200_ID_UHP, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91rm9200_usbh_device = { ++ .name = "at91_ohci", ++ .id = -1, ++ .dev = { ++ .dma_mask = &ohci_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &usbh_data, ++ }, ++ .resource = usbh_resources, ++ .num_resources = ARRAY_SIZE(usbh_resources), ++}; ++ ++void __init at91_add_device_usbh(struct at91_usbh_data *data) ++{ ++ if (!data) ++ return; ++ ++ usbh_data = *data; ++ platform_device_register(&at91rm9200_usbh_device); ++} ++#else ++void __init at91_add_device_usbh(struct at91_usbh_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * USB Device (Gadget) ++ * -------------------------------------------------------------------- */ ++ ++#ifdef CONFIG_USB_GADGET_AT91 ++static struct at91_udc_data udc_data; ++ ++static struct resource udc_resources[] = { ++ [0] = { ++ .start = AT91RM9200_BASE_UDP, ++ .end = AT91RM9200_BASE_UDP + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91RM9200_ID_UDP, ++ .end = AT91RM9200_ID_UDP, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91rm9200_udc_device = { ++ .name = "at91_udc", ++ .id = -1, ++ .dev = { ++ .platform_data = &udc_data, ++ }, ++ .resource = udc_resources, ++ .num_resources = ARRAY_SIZE(udc_resources), ++}; ++ ++void __init at91_add_device_udc(struct at91_udc_data *data) ++{ ++ if (!data) ++ return; ++ ++ if (data->vbus_pin) { ++ at91_set_gpio_input(data->vbus_pin, 0); ++ at91_set_deglitch(data->vbus_pin, 1); ++ } ++ if (data->pullup_pin) ++ at91_set_gpio_output(data->pullup_pin, 0); ++ ++ udc_data = *data; ++ platform_device_register(&at91rm9200_udc_device); ++} ++#else ++void __init at91_add_device_udc(struct at91_udc_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * Ethernet ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE) ++static u64 eth_dmamask = 0xffffffffUL; ++static struct eth_platform_data eth_data; ++ ++static struct resource eth_resources[] = { ++ [0] = { ++ .start = AT91_VA_BASE_EMAC, ++ .end = AT91_VA_BASE_EMAC + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91RM9200_ID_EMAC, ++ .end = AT91RM9200_ID_EMAC, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91rm9200_eth_device = { ++ .name = "at91_ether", ++ .id = -1, ++ .dev = { ++ .dma_mask = ð_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = ð_data, ++ }, ++ .resource = eth_resources, ++ .num_resources = ARRAY_SIZE(eth_resources), ++}; ++ ++void __init at91_add_device_eth(struct eth_platform_data *data) ++{ ++ if (!data) ++ return; ++ ++ if (data->phy_irq_pin) { ++ at91_set_gpio_input(data->phy_irq_pin, 0); ++ at91_set_deglitch(data->phy_irq_pin, 1); ++ } ++ ++ /* Pins used for MII and RMII */ ++ at91_set_A_periph(AT91_PIN_PA16, 0); /* EMDIO */ ++ at91_set_A_periph(AT91_PIN_PA15, 0); /* EMDC */ ++ at91_set_A_periph(AT91_PIN_PA14, 0); /* ERXER */ ++ at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */ ++ at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */ ++ at91_set_A_periph(AT91_PIN_PA11, 0); /* ECRS_ECRSDV */ ++ at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX1 */ ++ at91_set_A_periph(AT91_PIN_PA9, 0); /* ETX0 */ ++ at91_set_A_periph(AT91_PIN_PA8, 0); /* ETXEN */ ++ at91_set_A_periph(AT91_PIN_PA7, 0); /* ETXCK_EREFCK */ ++ ++ if (!data->is_rmii) { ++ at91_set_B_periph(AT91_PIN_PB19, 0); /* ERXCK */ ++ at91_set_B_periph(AT91_PIN_PB18, 0); /* ECOL */ ++ at91_set_B_periph(AT91_PIN_PB17, 0); /* ERXDV */ ++ at91_set_B_periph(AT91_PIN_PB16, 0); /* ERX3 */ ++ at91_set_B_periph(AT91_PIN_PB15, 0); /* ERX2 */ ++ at91_set_B_periph(AT91_PIN_PB14, 0); /* ETXER */ ++ at91_set_B_periph(AT91_PIN_PB13, 0); /* ETX3 */ ++ at91_set_B_periph(AT91_PIN_PB12, 0); /* ETX2 */ ++ } ++ ++ eth_data = *data; ++ platform_device_register(&at91rm9200_eth_device); ++} ++#else ++void __init at91_add_device_eth(struct eth_platform_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * Compact Flash / PCMCIA ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) ++static struct at91_cf_data cf_data; ++ ++#define CF_BASE AT91_CHIPSELECT_4 ++ ++static struct resource cf_resources[] = { ++ [0] = { ++ .start = CF_BASE, ++ /* ties up CS4, CS5 and CS6 */ ++ .end = CF_BASE + (0x30000000 - 1), ++ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT, ++ }, ++}; ++ ++static struct platform_device at91rm9200_cf_device = { ++ .name = "at91_cf", ++ .id = -1, ++ .dev = { ++ .platform_data = &cf_data, ++ }, ++ .resource = cf_resources, ++ .num_resources = ARRAY_SIZE(cf_resources), ++}; ++ ++void __init at91_add_device_cf(struct at91_cf_data *data) ++{ ++ unsigned int csa; ++ ++ if (!data) ++ return; ++ ++ data->chipselect = 4; /* can only use EBI ChipSelect 4 */ ++ ++ /* CF takes over CS4, CS5, CS6 */ ++ csa = at91_sys_read(AT91_EBI_CSA); ++ at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH); ++ ++ /* ++ * Static memory controller timing adjustments. ++ * REVISIT: these timings are in terms of MCK cycles, so ++ * when MCK changes (cpufreq etc) so must these values... ++ */ ++ at91_sys_write(AT91_SMC_CSR(4), ++ AT91_SMC_ACSS_STD ++ | AT91_SMC_DBW_16 ++ | AT91_SMC_BAT ++ | AT91_SMC_WSEN ++ | AT91_SMC_NWS_(32) /* wait states */ ++ | AT91_SMC_RWSETUP_(6) /* setup time */ ++ | AT91_SMC_RWHOLD_(4) /* hold time */ ++ ); ++ ++ /* input/irq */ ++ if (data->irq_pin) { ++ at91_set_gpio_input(data->irq_pin, 1); ++ at91_set_deglitch(data->irq_pin, 1); ++ } ++ at91_set_gpio_input(data->det_pin, 1); ++ at91_set_deglitch(data->det_pin, 1); ++ ++ /* outputs, initially off */ ++ if (data->vcc_pin) ++ at91_set_gpio_output(data->vcc_pin, 0); ++ at91_set_gpio_output(data->rst_pin, 0); ++ ++ /* force poweron defaults for these pins ... */ ++ at91_set_A_periph(AT91_PIN_PC9, 0); /* A25/CFRNW */ ++ at91_set_A_periph(AT91_PIN_PC10, 0); /* NCS4/CFCS */ ++ at91_set_A_periph(AT91_PIN_PC11, 0); /* NCS5/CFCE1 */ ++ at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */ ++ ++ /* nWAIT is _not_ a default setting */ ++ at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */ ++ ++ cf_data = *data; ++ platform_device_register(&at91rm9200_cf_device); ++} ++#else ++void __init at91_add_device_cf(struct at91_cf_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * MMC / SD ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) ++static u64 mmc_dmamask = 0xffffffffUL; ++static struct at91_mmc_data mmc_data; ++ ++static struct resource mmc_resources[] = { ++ [0] = { ++ .start = AT91RM9200_BASE_MCI, ++ .end = AT91RM9200_BASE_MCI + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91RM9200_ID_MCI, ++ .end = AT91RM9200_ID_MCI, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91rm9200_mmc_device = { ++ .name = "at91_mci", ++ .id = -1, ++ .dev = { ++ .dma_mask = &mmc_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &mmc_data, ++ }, ++ .resource = mmc_resources, ++ .num_resources = ARRAY_SIZE(mmc_resources), ++}; ++ ++void __init at91_add_device_mmc(struct at91_mmc_data *data) ++{ ++ if (!data) ++ return; ++ ++ /* input/irq */ ++ if (data->det_pin) { ++ at91_set_gpio_input(data->det_pin, 1); ++ at91_set_deglitch(data->det_pin, 1); ++ } ++ if (data->wp_pin) ++ at91_set_gpio_input(data->wp_pin, 1); ++ if (data->vcc_pin) ++ at91_set_gpio_output(data->vcc_pin, 0); ++ ++ /* CLK */ ++ at91_set_A_periph(AT91_PIN_PA27, 0); ++ ++ if (data->slot_b) { ++ /* CMD */ ++ at91_set_B_periph(AT91_PIN_PA8, 1); ++ ++ /* DAT0, maybe DAT1..DAT3 */ ++ at91_set_B_periph(AT91_PIN_PA9, 1); ++ if (data->wire4) { ++ at91_set_B_periph(AT91_PIN_PA10, 1); ++ at91_set_B_periph(AT91_PIN_PA11, 1); ++ at91_set_B_periph(AT91_PIN_PA12, 1); ++ } ++ } else { ++ /* CMD */ ++ at91_set_A_periph(AT91_PIN_PA28, 1); ++ ++ /* DAT0, maybe DAT1..DAT3 */ ++ at91_set_A_periph(AT91_PIN_PA29, 1); ++ if (data->wire4) { ++ at91_set_B_periph(AT91_PIN_PB3, 1); ++ at91_set_B_periph(AT91_PIN_PB4, 1); ++ at91_set_B_periph(AT91_PIN_PB5, 1); ++ } ++ } ++ ++ mmc_data = *data; ++ platform_device_register(&at91rm9200_mmc_device); ++} ++#else ++void __init at91_add_device_mmc(struct at91_mmc_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * NAND / SmartMedia ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) ++static struct at91_nand_data nand_data; ++ ++#define NAND_BASE AT91_CHIPSELECT_3 ++ ++static struct resource nand_resources[] = { ++ { ++ .start = NAND_BASE, ++ .end = NAND_BASE + SZ_8M - 1, ++ .flags = IORESOURCE_MEM, ++ } ++}; ++ ++static struct platform_device at91rm9200_nand_device = { ++ .name = "at91_nand", ++ .id = -1, ++ .dev = { ++ .platform_data = &nand_data, ++ }, ++ .resource = nand_resources, ++ .num_resources = ARRAY_SIZE(nand_resources), ++}; ++ ++void __init at91_add_device_nand(struct at91_nand_data *data) ++{ ++ unsigned int csa; ++ ++ if (!data) ++ return; ++ ++ /* enable the address range of CS3 */ ++ csa = at91_sys_read(AT91_EBI_CSA); ++ at91_sys_write(AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA); ++ ++ /* set the bus interface characteristics */ ++ at91_sys_write(AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN ++ | AT91_SMC_NWS_(5) ++ | AT91_SMC_TDF_(1) ++ | AT91_SMC_RWSETUP_(0) /* tDS Data Set up Time 30 - ns */ ++ | AT91_SMC_RWHOLD_(1) /* tDH Data Hold Time 20 - ns */ ++ ); ++ ++ /* enable pin */ ++ if (data->enable_pin) ++ at91_set_gpio_output(data->enable_pin, 1); ++ ++ /* ready/busy pin */ ++ if (data->rdy_pin) ++ at91_set_gpio_input(data->rdy_pin, 1); ++ ++ /* card detect pin */ ++ if (data->det_pin) ++ at91_set_gpio_input(data->det_pin, 1); ++ ++ at91_set_A_periph(AT91_PIN_PC1, 0); /* SMOE */ ++ at91_set_A_periph(AT91_PIN_PC3, 0); /* SMWE */ ++ ++ nand_data = *data; ++ platform_device_register(&at91rm9200_nand_device); ++} ++#else ++void __init at91_add_device_nand(struct at91_nand_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * TWI (i2c) ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) ++ ++static struct resource twi_resources[] = { ++ [0] = { ++ .start = AT91RM9200_BASE_TWI, ++ .end = AT91RM9200_BASE_TWI + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91RM9200_ID_TWI, ++ .end = AT91RM9200_ID_TWI, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91rm9200_twi_device = { ++ .name = "at91_i2c", ++ .id = -1, ++ .resource = twi_resources, ++ .num_resources = ARRAY_SIZE(twi_resources), ++}; ++ ++void __init at91_add_device_i2c(void) ++{ ++ /* pins used for TWI interface */ ++ at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */ ++ at91_set_multi_drive(AT91_PIN_PA25, 1); ++ ++ at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */ ++ at91_set_multi_drive(AT91_PIN_PA26, 1); ++ ++ platform_device_register(&at91rm9200_twi_device); ++} ++#else ++void __init at91_add_device_i2c(void) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * SPI ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_SPI_AT91) || defined(CONFIG_SPI_AT91_MODULE) || defined(CONFIG_AT91_SPI) || defined(CONFIG_AT91_SPI_MODULE) ++static u64 spi_dmamask = 0xffffffffUL; ++ ++static struct resource spi_resources[] = { ++ [0] = { ++ .start = AT91RM9200_BASE_SPI, ++ .end = AT91RM9200_BASE_SPI + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91RM9200_ID_SPI, ++ .end = AT91RM9200_ID_SPI, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91rm9200_spi_device = { ++ .name = "at91_spi", ++ .id = 0, ++ .dev = { ++ .dma_mask = &spi_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = spi_resources, ++ .num_resources = ARRAY_SIZE(spi_resources), ++}; ++ ++static const unsigned spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; ++ ++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) ++{ ++ int i; ++ unsigned long cs_pin; ++ ++ at91_set_A_periph(AT91_PIN_PA0, 0); /* MISO */ ++ at91_set_A_periph(AT91_PIN_PA1, 0); /* MOSI */ ++ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPCK */ ++ ++ /* Enable SPI chip-selects */ ++ for (i = 0; i < nr_devices; i++) { ++ if (devices[i].controller_data) ++ cs_pin = (unsigned long) devices[i].controller_data; ++ else ++ cs_pin = spi_standard_cs[devices[i].chip_select]; ++ ++#ifdef CONFIG_SPI_AT91_MANUAL_CS ++ at91_set_gpio_output(cs_pin, 1); ++#else ++ at91_set_A_periph(cs_pin, 0); ++#endif ++ ++ /* pass chip-select pin to driver */ ++ devices[i].controller_data = (void *) cs_pin; ++ } ++ ++ spi_register_board_info(devices, nr_devices); ++ at91_clock_associate("spi_clk", &at91rm9200_spi_device.dev, "spi"); ++ platform_device_register(&at91rm9200_spi_device); ++} ++#else ++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * RTC ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE) ++static struct platform_device at91rm9200_rtc_device = { ++ .name = "at91_rtc", ++ .id = -1, ++ .num_resources = 0, ++}; ++ ++static void __init at91_add_device_rtc(void) ++{ ++ platform_device_register(&at91rm9200_rtc_device); ++} ++#else ++static void __init at91_add_device_rtc(void) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * Watchdog ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_AT91RM9200_WATCHDOG) || defined(CONFIG_AT91RM9200_WATCHDOG_MODULE) ++static struct platform_device at91rm9200_wdt_device = { ++ .name = "at91_wdt", ++ .id = -1, ++ .num_resources = 0, ++}; ++ ++static void __init at91_add_device_watchdog(void) ++{ ++ platform_device_register(&at91rm9200_wdt_device); ++} ++#else ++static void __init at91_add_device_watchdog(void) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * LEDs ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_LEDS) ++u8 at91_leds_cpu; ++u8 at91_leds_timer; ++ ++void __init at91_init_leds(u8 cpu_led, u8 timer_led) ++{ ++ at91_leds_cpu = cpu_led; ++ at91_leds_timer = timer_led; ++} ++#else ++void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} ++#endif ++ ++ ++#if defined(CONFIG_NEW_LEDS) ++ ++static struct platform_device at91_leds = { ++ .name = "at91_leds", ++ .id = -1, ++}; ++ ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) ++{ ++ if (!nr) ++ return; ++ ++ at91_leds.dev.platform_data = leds; ++ ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); ++ } ++ ++ platform_device_register(&at91_leds); ++} ++#else ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * UART ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_SERIAL_ATMEL) ++static struct resource dbgu_resources[] = { ++ [0] = { ++ .start = AT91_VA_BASE_SYS + AT91_DBGU, ++ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91_ID_SYS, ++ .end = AT91_ID_SYS, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data dbgu_data = { ++ .use_dma_tx = 0, ++ .use_dma_rx = 0, /* DBGU not capable of receive DMA */ ++ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), ++}; ++ ++static struct platform_device at91rm9200_dbgu_device = { ++ .name = "atmel_usart", ++ .id = 0, ++ .dev = { ++ .platform_data = &dbgu_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = dbgu_resources, ++ .num_resources = ARRAY_SIZE(dbgu_resources), ++}; ++ ++static inline void configure_dbgu_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PA30, 0); /* DRXD */ ++ at91_set_A_periph(AT91_PIN_PA31, 1); /* DTXD */ ++} ++ ++static struct resource uart0_resources[] = { ++ [0] = { ++ .start = AT91RM9200_BASE_US0, ++ .end = AT91RM9200_BASE_US0 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91RM9200_ID_US0, ++ .end = AT91RM9200_ID_US0, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart0_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91rm9200_uart0_device = { ++ .name = "atmel_usart", ++ .id = 1, ++ .dev = { ++ .platform_data = &uart0_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart0_resources, ++ .num_resources = ARRAY_SIZE(uart0_resources), ++}; ++ ++static inline void configure_usart0_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */ ++ at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */ ++ at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */ ++ ++ /* ++ * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21. ++ * We need to drive the pin manually. Default is off (RTS is active low). ++ */ ++ at91_set_gpio_output(AT91_PIN_PA21, 1); ++} ++ ++static struct resource uart1_resources[] = { ++ [0] = { ++ .start = AT91RM9200_BASE_US1, ++ .end = AT91RM9200_BASE_US1 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91RM9200_ID_US1, ++ .end = AT91RM9200_ID_US1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart1_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91rm9200_uart1_device = { ++ .name = "atmel_usart", ++ .id = 2, ++ .dev = { ++ .platform_data = &uart1_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart1_resources, ++ .num_resources = ARRAY_SIZE(uart1_resources), ++}; ++ ++static inline void configure_usart1_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */ ++ at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */ ++ at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */ ++ at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */ ++ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */ ++ at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */ ++ at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */ ++ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */ ++} ++ ++static struct resource uart2_resources[] = { ++ [0] = { ++ .start = AT91RM9200_BASE_US2, ++ .end = AT91RM9200_BASE_US2 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91RM9200_ID_US2, ++ .end = AT91RM9200_ID_US2, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart2_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91rm9200_uart2_device = { ++ .name = "atmel_usart", ++ .id = 3, ++ .dev = { ++ .platform_data = &uart2_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart2_resources, ++ .num_resources = ARRAY_SIZE(uart2_resources), ++}; ++ ++static inline void configure_usart2_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */ ++ at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */ ++} ++ ++static struct resource uart3_resources[] = { ++ [0] = { ++ .start = AT91RM9200_BASE_US3, ++ .end = AT91RM9200_BASE_US3 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91RM9200_ID_US3, ++ .end = AT91RM9200_ID_US3, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart3_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91rm9200_uart3_device = { ++ .name = "atmel_usart", ++ .id = 4, ++ .dev = { ++ .platform_data = &uart3_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart3_resources, ++ .num_resources = ARRAY_SIZE(uart3_resources), ++}; ++ ++static inline void configure_usart3_pins(void) ++{ ++ at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */ ++ at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */ ++} ++ ++struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ ++struct platform_device *atmel_default_console_device; /* the serial console device */ ++ ++void __init at91_init_serial(struct at91_uart_config *config) ++{ ++ int i; ++ ++ /* Fill in list of supported UARTs */ ++ for (i = 0; i < config->nr_tty; i++) { ++ switch (config->tty_map[i]) { ++ case 0: ++ configure_usart0_pins(); ++ at91_uarts[i] = &at91rm9200_uart0_device; ++ at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart"); ++ break; ++ case 1: ++ configure_usart1_pins(); ++ at91_uarts[i] = &at91rm9200_uart1_device; ++ at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart"); ++ break; ++ case 2: ++ configure_usart2_pins(); ++ at91_uarts[i] = &at91rm9200_uart2_device; ++ at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart"); ++ break; ++ case 3: ++ configure_usart3_pins(); ++ at91_uarts[i] = &at91rm9200_uart3_device; ++ at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart"); ++ break; ++ case 4: ++ configure_dbgu_pins(); ++ at91_uarts[i] = &at91rm9200_dbgu_device; ++ at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart"); ++ break; ++ default: ++ continue; ++ } ++ at91_uarts[i]->id = i; /* update ID number to mapped ID */ ++ } ++ ++ /* Set serial console device */ ++ if (config->console_tty < ATMEL_MAX_UART) ++ atmel_default_console_device = at91_uarts[config->console_tty]; ++ if (!atmel_default_console_device) ++ printk(KERN_INFO "AT91: No default serial console defined.\n"); ++} ++ ++void __init at91_add_device_serial(void) ++{ ++ int i; ++ ++ for (i = 0; i < ATMEL_MAX_UART; i++) { ++ if (at91_uarts[i]) ++ platform_device_register(at91_uarts[i]); ++ } ++} ++#else ++void __init at91_init_serial(struct at91_uart_config *config) {} ++void __init at91_add_device_serial(void) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- */ ++ ++/* ++ * These devices are always present and don't need any board-specific ++ * setup. ++ */ ++static int __init at91_add_standard_devices(void) ++{ ++ at91_add_device_rtc(); ++ at91_add_device_watchdog(); ++ return 0; ++} ++ ++arch_initcall(at91_add_standard_devices); +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200_time.c linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200_time.c +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91rm9200_time.c Mon Dec 4 16:39:29 2006 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91rm9200_time.c Thu Nov 16 11:41:09 2006 +@@ -30,6 +30,8 @@ + #include + #include + ++#include ++ + static unsigned long last_crtr; + + /* +@@ -99,6 +101,9 @@ + /* Set Period Interval timer */ + at91_sys_write(AT91_ST_PIMR, LATCH); + ++ /* Clear any pending interrupts */ ++ (void) at91_sys_read(AT91_ST_SR); ++ + /* Enable Period Interval Timer interrupt */ + at91_sys_write(AT91_ST_IER, AT91_ST_PITS); + } +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9260.c linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9260.c +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9260.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9260.c Mon Nov 20 10:52:16 2006 +@@ -0,0 +1,294 @@ ++/* ++ * arch/arm/mach-at91rm9200/at91sam9260.c ++ * ++ * Copyright (C) 2006 SAN People ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ */ ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "generic.h" ++#include "clock.h" ++ ++static struct map_desc at91sam9260_io_desc[] __initdata = { ++ { ++ .virtual = AT91_VA_BASE_SYS, ++ .pfn = __phys_to_pfn(AT91_BASE_SYS), ++ .length = SZ_16K, ++ .type = MT_DEVICE, ++ }, { ++ .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE, ++ .pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE), ++ .length = AT91SAM9260_SRAM0_SIZE, ++ .type = MT_DEVICE, ++ }, { ++ .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE, ++ .pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE), ++ .length = AT91SAM9260_SRAM1_SIZE, ++ .type = MT_DEVICE, ++ }, ++}; ++ ++/* -------------------------------------------------------------------- ++ * Clocks ++ * -------------------------------------------------------------------- */ ++ ++/* ++ * The peripheral clocks. ++ */ ++static struct clk pioA_clk = { ++ .name = "pioA_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_PIOA, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk pioB_clk = { ++ .name = "pioB_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_PIOB, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk pioC_clk = { ++ .name = "pioC_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_PIOC, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk adc_clk = { ++ .name = "adc_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_ADC, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk usart0_clk = { ++ .name = "usart0_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_US0, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk usart1_clk = { ++ .name = "usart1_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_US1, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk usart2_clk = { ++ .name = "usart2_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_US2, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk mmc_clk = { ++ .name = "mci_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_MCI, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk udc_clk = { ++ .name = "udc_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_UDP, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk twi_clk = { ++ .name = "twi_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_TWI, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk spi0_clk = { ++ .name = "spi0_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_SPI0, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk spi1_clk = { ++ .name = "spi1_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_SPI1, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ohci_clk = { ++ .name = "ohci_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_UHP, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ether_clk = { ++ .name = "ether_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_EMAC, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk isi_clk = { ++ .name = "isi_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_ISI, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk usart3_clk = { ++ .name = "usart3_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_US3, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk usart4_clk = { ++ .name = "usart4_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_US4, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk usart5_clk = { ++ .name = "usart5_clk", ++ .pmc_mask = 1 << AT91SAM9260_ID_US5, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++ ++static struct clk *periph_clocks[] __initdata = { ++ &pioA_clk, ++ &pioB_clk, ++ &pioC_clk, ++ &adc_clk, ++ &usart0_clk, ++ &usart1_clk, ++ &usart2_clk, ++ &mmc_clk, ++ &udc_clk, ++ &twi_clk, ++ &spi0_clk, ++ &spi1_clk, ++ // ssc ++ // tc0 .. tc2 ++ &ohci_clk, ++ ðer_clk, ++ &isi_clk, ++ &usart3_clk, ++ &usart4_clk, ++ &usart5_clk, ++ // tc3 .. tc5 ++ // irq0 .. irq2 ++}; ++ ++/* ++ * The two programmable clocks. ++ * You must configure pin multiplexing to bring these signals out. ++ */ ++static struct clk pck0 = { ++ .name = "pck0", ++ .pmc_mask = AT91_PMC_PCK0, ++ .type = CLK_TYPE_PROGRAMMABLE, ++ .id = 0, ++}; ++static struct clk pck1 = { ++ .name = "pck1", ++ .pmc_mask = AT91_PMC_PCK1, ++ .type = CLK_TYPE_PROGRAMMABLE, ++ .id = 1, ++}; ++ ++static void __init at91sam9260_register_clocks(void) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) ++ clk_register(periph_clocks[i]); ++ ++ clk_register(&pck0); ++ clk_register(&pck1); ++} ++ ++/* -------------------------------------------------------------------- ++ * GPIO ++ * -------------------------------------------------------------------- */ ++ ++static struct at91_gpio_bank at91sam9260_gpio[] = { ++ { ++ .id = AT91SAM9260_ID_PIOA, ++ .offset = AT91_PIOA, ++ .clock = &pioA_clk, ++ }, { ++ .id = AT91SAM9260_ID_PIOB, ++ .offset = AT91_PIOB, ++ .clock = &pioB_clk, ++ }, { ++ .id = AT91SAM9260_ID_PIOC, ++ .offset = AT91_PIOC, ++ .clock = &pioC_clk, ++ } ++}; ++ ++static void at91sam9260_reset(void) ++{ ++#warning "Implement CPU reset" ++} ++ ++ ++/* -------------------------------------------------------------------- ++ * AT91SAM9260 processor initialization ++ * -------------------------------------------------------------------- */ ++ ++void __init at91sam9260_initialize(unsigned long main_clock) ++{ ++ /* Map peripherals */ ++ iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc)); ++ ++ at91_arch_reset = at91sam9260_reset; ++ at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) ++ | (1 << AT91SAM9260_ID_IRQ2); ++ ++ /* Init clock subsystem */ ++ at91_clock_init(main_clock); ++ ++ /* Register the processor-specific clocks */ ++ at91sam9260_register_clocks(); ++ ++ /* Register GPIO subsystem */ ++ at91_gpio_init(at91sam9260_gpio, 3); ++} ++ ++/* -------------------------------------------------------------------- ++ * Interrupt initialization ++ * -------------------------------------------------------------------- */ ++ ++/* ++ * The default interrupt priority levels (0 = lowest, 7 = highest). ++ */ ++static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { ++ 7, /* Advanced Interrupt Controller */ ++ 7, /* System Peripherals */ ++ 0, /* Parallel IO Controller A */ ++ 0, /* Parallel IO Controller B */ ++ 0, /* Parallel IO Controller C */ ++ 0, /* Analog-to-Digital Converter */ ++ 6, /* USART 0 */ ++ 6, /* USART 1 */ ++ 6, /* USART 2 */ ++ 0, /* Multimedia Card Interface */ ++ 4, /* USB Device Port */ ++ 0, /* Two-Wire Interface */ ++ 6, /* Serial Peripheral Interface 0 */ ++ 6, /* Serial Peripheral Interface 1 */ ++ 5, /* Serial Synchronous Controller */ ++ 0, ++ 0, ++ 0, /* Timer Counter 0 */ ++ 0, /* Timer Counter 1 */ ++ 0, /* Timer Counter 2 */ ++ 3, /* USB Host port */ ++ 3, /* Ethernet */ ++ 0, /* Image Sensor Interface */ ++ 6, /* USART 3 */ ++ 6, /* USART 4 */ ++ 6, /* USART 5 */ ++ 0, /* Timer Counter 3 */ ++ 0, /* Timer Counter 4 */ ++ 0, /* Timer Counter 5 */ ++ 0, /* Advanced Interrupt Controller */ ++ 0, /* Advanced Interrupt Controller */ ++ 0, /* Advanced Interrupt Controller */ ++}; ++ ++void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS]) ++{ ++ if (!priority) ++ priority = at91sam9260_default_irq_priority; ++ ++ /* Initialize the AIC interrupt controller */ ++ at91_aic_init(priority); ++ ++ /* Enable GPIO interrupts */ ++ at91_gpio_irq_setup(); ++} +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9260_devices.c linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9260_devices.c +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9260_devices.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9260_devices.c Thu Nov 23 16:37:24 2006 +@@ -0,0 +1,892 @@ ++/* ++ * arch/arm/mach-at91rm9200/at91sam9260_devices.c ++ * ++ * Copyright (C) 2006 Atmel ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ */ ++#include ++#include ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "generic.h" ++ ++#define SZ_512 0x00000200 ++#define SZ_256 0x00000100 ++#define SZ_16 0x00000010 ++ ++/* -------------------------------------------------------------------- ++ * USB Host ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) ++static u64 ohci_dmamask = 0xffffffffUL; ++static struct at91_usbh_data usbh_data; ++ ++static struct resource usbh_resources[] = { ++ [0] = { ++ .start = AT91SAM9260_UHP_BASE, ++ .end = AT91SAM9260_UHP_BASE + SZ_1M - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9260_ID_UHP, ++ .end = AT91SAM9260_ID_UHP, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91_usbh_device = { ++ .name = "at91_ohci", ++ .id = -1, ++ .dev = { ++ .dma_mask = &ohci_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &usbh_data, ++ }, ++ .resource = usbh_resources, ++ .num_resources = ARRAY_SIZE(usbh_resources), ++}; ++ ++void __init at91_add_device_usbh(struct at91_usbh_data *data) ++{ ++ if (!data) ++ return; ++ ++ usbh_data = *data; ++ platform_device_register(&at91_usbh_device); ++} ++#else ++void __init at91_add_device_usbh(struct at91_usbh_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * USB Device (Gadget) ++ * -------------------------------------------------------------------- */ ++ ++#ifdef CONFIG_USB_GADGET_AT91 ++static struct at91_udc_data udc_data; ++ ++static struct resource udc_resources[] = { ++ [0] = { ++ .start = AT91SAM9260_BASE_UDP, ++ .end = AT91SAM9260_BASE_UDP + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9260_ID_UDP, ++ .end = AT91SAM9260_ID_UDP, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91_udc_device = { ++ .name = "at91_udc", ++ .id = -1, ++ .dev = { ++ .platform_data = &udc_data, ++ }, ++ .resource = udc_resources, ++ .num_resources = ARRAY_SIZE(udc_resources), ++}; ++ ++void __init at91_add_device_udc(struct at91_udc_data *data) ++{ ++ if (!data) ++ return; ++ ++ if (data->vbus_pin) { ++ at91_set_gpio_input(data->vbus_pin, 0); ++ at91_set_deglitch(data->vbus_pin, 1); ++ } ++ ++ /* Pullup pin is handled internally by USB device peripheral */ ++ ++ udc_data = *data; ++ platform_device_register(&at91_udc_device); ++} ++#else ++void __init at91_add_device_udc(struct at91_udc_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * Ethernet ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) ++static u64 eth_dmamask = 0xffffffffUL; ++static struct eth_platform_data eth_data; ++ ++static struct resource eth_resources[] = { ++ [0] = { ++ .start = AT91SAM9260_BASE_EMAC, ++ .end = AT91SAM9260_BASE_EMAC + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9260_ID_EMAC, ++ .end = AT91SAM9260_ID_EMAC, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9260_eth_device = { ++ .name = "macb", ++ .id = -1, ++ .dev = { ++ .dma_mask = ð_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = ð_data, ++ }, ++ .resource = eth_resources, ++ .num_resources = ARRAY_SIZE(eth_resources), ++}; ++ ++void __init at91_add_device_eth(struct eth_platform_data *data) ++{ ++ if (!data) ++ return; ++ ++ if (data->phy_irq_pin) { ++ at91_set_gpio_input(data->phy_irq_pin, 0); ++ at91_set_deglitch(data->phy_irq_pin, 1); ++ } ++ ++ /* Pins used for MII and RMII */ ++ at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */ ++ at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ ++ at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */ ++ at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */ ++ at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */ ++ at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */ ++ at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */ ++ at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */ ++ at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */ ++ at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */ ++ ++ if (!data->is_rmii) { ++ at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */ ++ at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */ ++ at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ ++ at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ ++ at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ ++ at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ ++ at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ ++ at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ ++ } ++ ++ eth_data = *data; ++ platform_device_register(&at91sam9260_eth_device); ++} ++#else ++void __init at91_add_device_eth(struct eth_platform_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * MMC / SD ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) ++static u64 mmc_dmamask = 0xffffffffUL; ++static struct at91_mmc_data mmc_data; ++ ++static struct resource mmc_resources[] = { ++ [0] = { ++ .start = AT91SAM9260_BASE_MCI, ++ .end = AT91SAM9260_BASE_MCI + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9260_ID_MCI, ++ .end = AT91SAM9260_ID_MCI, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9260_mmc_device = { ++ .name = "at91_mci", ++ .id = -1, ++ .dev = { ++ .dma_mask = &mmc_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &mmc_data, ++ }, ++ .resource = mmc_resources, ++ .num_resources = ARRAY_SIZE(mmc_resources), ++}; ++ ++void __init at91_add_device_mmc(struct at91_mmc_data *data) ++{ ++ if (!data) ++ return; ++ ++ /* input/irq */ ++ if (data->det_pin) { ++ at91_set_gpio_input(data->det_pin, 1); ++ at91_set_deglitch(data->det_pin, 1); ++ } ++ if (data->wp_pin) ++ at91_set_gpio_input(data->wp_pin, 1); ++ if (data->vcc_pin) ++ at91_set_gpio_output(data->vcc_pin, 0); ++ ++ /* CLK */ ++ at91_set_A_periph(AT91_PIN_PA8, 0); ++ ++ if (data->slot_b) { ++ /* CMD */ ++ at91_set_B_periph(AT91_PIN_PA1, 1); ++ ++ /* DAT0, maybe DAT1..DAT3 */ ++ at91_set_B_periph(AT91_PIN_PA0, 1); ++ if (data->wire4) { ++ at91_set_B_periph(AT91_PIN_PA5, 1); ++ at91_set_B_periph(AT91_PIN_PA4, 1); ++ at91_set_B_periph(AT91_PIN_PA3, 1); ++ } ++ } else { ++ /* CMD */ ++ at91_set_A_periph(AT91_PIN_PA7, 1); ++ ++ /* DAT0, maybe DAT1..DAT3 */ ++ at91_set_A_periph(AT91_PIN_PA6, 1); ++ if (data->wire4) { ++ at91_set_A_periph(AT91_PIN_PA9, 1); ++ at91_set_A_periph(AT91_PIN_PA10, 1); ++ at91_set_A_periph(AT91_PIN_PA11, 1); ++ } ++ } ++ ++ mmc_data = *data; ++ platform_device_register(&at91sam9260_mmc_device); ++} ++#else ++void __init at91_add_device_mmc(struct at91_mmc_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * NAND / SmartMedia ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) ++static struct at91_nand_data nand_data; ++ ++#define NAND_BASE AT91_CHIPSELECT_3 ++ ++static struct resource nand_resources[] = { ++ { ++ .start = NAND_BASE, ++ .end = NAND_BASE + SZ_8M - 1, ++ .flags = IORESOURCE_MEM, ++ } ++}; ++ ++static struct platform_device at91sam9260_nand_device = { ++ .name = "at91_nand", ++ .id = -1, ++ .dev = { ++ .platform_data = &nand_data, ++ }, ++ .resource = nand_resources, ++ .num_resources = ARRAY_SIZE(nand_resources), ++}; ++ ++void __init at91_add_device_nand(struct at91_nand_data *data) ++{ ++ unsigned long csa, mode; ++ ++ if (!data) ++ return; ++ ++ csa = at91_sys_read(AT91_MATRIX_EBICSA); ++ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC); ++ ++ /* set the bus interface characteristics */ ++ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) ++ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); ++ ++ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) ++ | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5)); ++ ++ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); ++ ++ if (data->bus_width_16) ++ mode = AT91_SMC_DBW_16; ++ else ++ mode = AT91_SMC_DBW_8; ++ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1)); ++ ++ /* enable pin */ ++ if (data->enable_pin) ++ at91_set_gpio_output(data->enable_pin, 1); ++ ++ /* ready/busy pin */ ++ if (data->rdy_pin) ++ at91_set_gpio_input(data->rdy_pin, 1); ++ ++ /* card detect pin */ ++ if (data->det_pin) ++ at91_set_gpio_input(data->det_pin, 1); ++ ++ nand_data = *data; ++ platform_device_register(&at91sam9260_nand_device); ++} ++#else ++void __init at91_add_device_nand(struct at91_nand_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * TWI (i2c) ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) ++ ++static struct resource twi_resources[] = { ++ [0] = { ++ .start = AT91SAM9260_BASE_TWI, ++ .end = AT91SAM9260_BASE_TWI + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9260_ID_TWI, ++ .end = AT91SAM9260_ID_TWI, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9260_twi_device = { ++ .name = "at91_i2c", ++ .id = -1, ++ .resource = twi_resources, ++ .num_resources = ARRAY_SIZE(twi_resources), ++}; ++ ++void __init at91_add_device_i2c(void) ++{ ++ /* pins used for TWI interface */ ++ at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */ ++ at91_set_multi_drive(AT91_PIN_PA23, 1); ++ ++ at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */ ++ at91_set_multi_drive(AT91_PIN_PA24, 1); ++ ++ platform_device_register(&at91sam9260_twi_device); ++} ++#else ++void __init at91_add_device_i2c(void) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * SPI ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) ++static u64 spi_dmamask = 0xffffffffUL; ++ ++static struct resource spi0_resources[] = { ++ [0] = { ++ .start = AT91SAM9260_BASE_SPI0, ++ .end = AT91SAM9260_BASE_SPI0 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9260_ID_SPI0, ++ .end = AT91SAM9260_ID_SPI0, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9260_spi0_device = { ++ .name = "atmel_spi", ++ .id = 0, ++ .dev = { ++ .dma_mask = &spi_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = spi0_resources, ++ .num_resources = ARRAY_SIZE(spi0_resources), ++}; ++ ++static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 }; ++ ++static struct resource spi1_resources[] = { ++ [0] = { ++ .start = AT91SAM9260_BASE_SPI1, ++ .end = AT91SAM9260_BASE_SPI1 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9260_ID_SPI1, ++ .end = AT91SAM9260_ID_SPI1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9260_spi1_device = { ++ .name = "atmel_spi", ++ .id = 1, ++ .dev = { ++ .dma_mask = &spi_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = spi1_resources, ++ .num_resources = ARRAY_SIZE(spi1_resources), ++}; ++ ++static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 }; ++ ++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) ++{ ++ int i; ++ unsigned long cs_pin; ++ short enable_spi0 = 0; ++ short enable_spi1 = 0; ++ ++ /* Choose SPI chip-selects */ ++ for (i = 0; i < nr_devices; i++) { ++ if (devices[i].controller_data) ++ cs_pin = (unsigned long) devices[i].controller_data; ++ else if (devices[i].bus_num == 0) ++ cs_pin = spi0_standard_cs[devices[i].chip_select]; ++ else ++ cs_pin = spi1_standard_cs[devices[i].chip_select]; ++ ++ if (devices[i].bus_num == 0) ++ enable_spi0 = 1; ++ else ++ enable_spi1 = 1; ++ ++ /* enable chip-select pin */ ++ at91_set_gpio_output(cs_pin, 1); ++ ++ /* pass chip-select pin to driver */ ++ devices[i].controller_data = (void *) cs_pin; ++ } ++ ++ spi_register_board_info(devices, nr_devices); ++ ++ /* Configure SPI bus(es) */ ++ if (enable_spi0) { ++ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ ++ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ ++ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */ ++ ++ at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk"); ++ platform_device_register(&at91sam9260_spi0_device); ++ } ++ if (enable_spi1) { ++ at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */ ++ at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */ ++ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */ ++ ++ at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk"); ++ platform_device_register(&at91sam9260_spi1_device); ++ } ++} ++#else ++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * LEDs ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_LEDS) ++u8 at91_leds_cpu; ++u8 at91_leds_timer; ++ ++void __init at91_init_leds(u8 cpu_led, u8 timer_led) ++{ ++ at91_leds_cpu = cpu_led; ++ at91_leds_timer = timer_led; ++} ++#else ++void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} ++#endif ++ ++ ++#if defined(CONFIG_NEW_LEDS) ++ ++static struct platform_device at91_leds = { ++ .name = "at91_leds", ++ .id = -1, ++}; ++ ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) ++{ ++ if (!nr) ++ return; ++ ++ at91_leds.dev.platform_data = leds; ++ ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); ++ } ++ ++ platform_device_register(&at91_leds); ++} ++#else ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * UART ++ * -------------------------------------------------------------------- */ ++#if defined(CONFIG_SERIAL_ATMEL) ++static struct resource dbgu_resources[] = { ++ [0] = { ++ .start = AT91_VA_BASE_SYS + AT91_DBGU, ++ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91_ID_SYS, ++ .end = AT91_ID_SYS, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data dbgu_data = { ++ .use_dma_tx = 0, ++ .use_dma_rx = 0, /* DBGU not capable of receive DMA */ ++ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), ++}; ++ ++static struct platform_device at91sam9260_dbgu_device = { ++ .name = "atmel_usart", ++ .id = 0, ++ .dev = { ++ .platform_data = &dbgu_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = dbgu_resources, ++ .num_resources = ARRAY_SIZE(dbgu_resources), ++}; ++ ++static inline void configure_dbgu_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */ ++ at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */ ++} ++ ++static struct resource uart0_resources[] = { ++ [0] = { ++ .start = AT91SAM9260_BASE_US0, ++ .end = AT91SAM9260_BASE_US0 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9260_ID_US0, ++ .end = AT91SAM9260_ID_US0, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart0_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91sam9260_uart0_device = { ++ .name = "atmel_usart", ++ .id = 1, ++ .dev = { ++ .platform_data = &uart0_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart0_resources, ++ .num_resources = ARRAY_SIZE(uart0_resources), ++}; ++ ++static inline void configure_usart0_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ ++ at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ ++ at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */ ++ at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */ ++ at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */ ++ at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */ ++ at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */ ++ at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */ ++} ++ ++static struct resource uart1_resources[] = { ++ [0] = { ++ .start = AT91SAM9260_BASE_US1, ++ .end = AT91SAM9260_BASE_US1 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9260_ID_US1, ++ .end = AT91SAM9260_ID_US1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart1_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91sam9260_uart1_device = { ++ .name = "atmel_usart", ++ .id = 2, ++ .dev = { ++ .platform_data = &uart1_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart1_resources, ++ .num_resources = ARRAY_SIZE(uart1_resources), ++}; ++ ++static inline void configure_usart1_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ ++ at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ ++ at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */ ++ at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */ ++} ++ ++static struct resource uart2_resources[] = { ++ [0] = { ++ .start = AT91SAM9260_BASE_US2, ++ .end = AT91SAM9260_BASE_US2 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9260_ID_US2, ++ .end = AT91SAM9260_ID_US2, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart2_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91sam9260_uart2_device = { ++ .name = "atmel_usart", ++ .id = 3, ++ .dev = { ++ .platform_data = &uart2_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart2_resources, ++ .num_resources = ARRAY_SIZE(uart2_resources), ++}; ++ ++static inline void configure_usart2_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ ++ at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ ++} ++ ++static struct resource uart3_resources[] = { ++ [0] = { ++ .start = AT91SAM9260_BASE_US3, ++ .end = AT91SAM9260_BASE_US3 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9260_ID_US3, ++ .end = AT91SAM9260_ID_US3, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart3_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91sam9260_uart3_device = { ++ .name = "atmel_usart", ++ .id = 4, ++ .dev = { ++ .platform_data = &uart3_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart3_resources, ++ .num_resources = ARRAY_SIZE(uart3_resources), ++}; ++ ++static inline void configure_usart3_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */ ++ at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */ ++} ++ ++static struct resource uart4_resources[] = { ++ [0] = { ++ .start = AT91SAM9260_BASE_US4, ++ .end = AT91SAM9260_BASE_US4 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9260_ID_US4, ++ .end = AT91SAM9260_ID_US4, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart4_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91sam9260_uart4_device = { ++ .name = "atmel_usart", ++ .id = 5, ++ .dev = { ++ .platform_data = &uart4_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart4_resources, ++ .num_resources = ARRAY_SIZE(uart4_resources), ++}; ++ ++static inline void configure_usart4_pins(void) ++{ ++ at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */ ++ at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */ ++} ++ ++static struct resource uart5_resources[] = { ++ [0] = { ++ .start = AT91SAM9260_BASE_US5, ++ .end = AT91SAM9260_BASE_US5 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9260_ID_US5, ++ .end = AT91SAM9260_ID_US5, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart5_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91sam9260_uart5_device = { ++ .name = "atmel_usart", ++ .id = 6, ++ .dev = { ++ .platform_data = &uart5_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart5_resources, ++ .num_resources = ARRAY_SIZE(uart5_resources), ++}; ++ ++static inline void configure_usart5_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */ ++ at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */ ++} ++ ++struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ ++struct platform_device *atmel_default_console_device; /* the serial console device */ ++ ++void __init at91_init_serial(struct at91_uart_config *config) ++{ ++ int i; ++ ++ /* Fill in list of supported UARTs */ ++ for (i = 0; i < config->nr_tty; i++) { ++ switch (config->tty_map[i]) { ++ case 0: ++ configure_usart0_pins(); ++ at91_uarts[i] = &at91sam9260_uart0_device; ++ at91_clock_associate("usart0_clk", &at91sam9260_uart0_device.dev, "usart"); ++ break; ++ case 1: ++ configure_usart1_pins(); ++ at91_uarts[i] = &at91sam9260_uart1_device; ++ at91_clock_associate("usart1_clk", &at91sam9260_uart1_device.dev, "usart"); ++ break; ++ case 2: ++ configure_usart2_pins(); ++ at91_uarts[i] = &at91sam9260_uart2_device; ++ at91_clock_associate("usart2_clk", &at91sam9260_uart2_device.dev, "usart"); ++ break; ++ case 3: ++ configure_usart3_pins(); ++ at91_uarts[i] = &at91sam9260_uart3_device; ++ at91_clock_associate("usart3_clk", &at91sam9260_uart3_device.dev, "usart"); ++ break; ++ case 4: ++ configure_usart4_pins(); ++ at91_uarts[i] = &at91sam9260_uart4_device; ++ at91_clock_associate("usart4_clk", &at91sam9260_uart4_device.dev, "usart"); ++ break; ++ case 5: ++ configure_usart5_pins(); ++ at91_uarts[i] = &at91sam9260_uart5_device; ++ at91_clock_associate("usart5_clk", &at91sam9260_uart5_device.dev, "usart"); ++ break; ++ case 6: ++ configure_dbgu_pins(); ++ at91_uarts[i] = &at91sam9260_dbgu_device; ++ at91_clock_associate("mck", &at91sam9260_dbgu_device.dev, "usart"); ++ break; ++ default: ++ continue; ++ } ++ at91_uarts[i]->id = i; /* update ID number to mapped ID */ ++ } ++ ++ /* Set serial console device */ ++ if (config->console_tty < ATMEL_MAX_UART) ++ atmel_default_console_device = at91_uarts[config->console_tty]; ++ if (!atmel_default_console_device) ++ printk(KERN_INFO "AT91: No default serial console defined.\n"); ++} ++ ++void __init at91_add_device_serial(void) ++{ ++ int i; ++ ++ for (i = 0; i < ATMEL_MAX_UART; i++) { ++ if (at91_uarts[i]) ++ platform_device_register(at91_uarts[i]); ++ } ++} ++#else ++void __init at91_init_serial(struct at91_uart_config *config) {} ++void __init at91_add_device_serial(void) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- */ ++/* ++ * These devices are always present and don't need any board-specific ++ * setup. ++ */ ++static int __init at91_add_standard_devices(void) ++{ ++ return 0; ++} ++ ++arch_initcall(at91_add_standard_devices); +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9261.c linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9261.c +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9261.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9261.c Thu Nov 23 15:41:39 2006 +@@ -0,0 +1,289 @@ ++/* ++ * arch/arm/mach-at91rm9200/at91sam9261.c ++ * ++ * Copyright (C) 2005 SAN People ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ */ ++ ++#include ++ ++#include ++#include ++#include ++#include ++ ++#include "generic.h" ++#include "clock.h" ++ ++static struct map_desc at91sam9261_io_desc[] __initdata = { ++ { ++ .virtual = AT91_VA_BASE_SYS, ++ .pfn = __phys_to_pfn(AT91_BASE_SYS), ++ .length = SZ_16K, ++ .type = MT_DEVICE, ++ }, { ++ .virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE, ++ .pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE), ++ .length = AT91SAM9261_SRAM_SIZE, ++ .type = MT_DEVICE, ++ }, ++}; ++ ++/* -------------------------------------------------------------------- ++ * Clocks ++ * -------------------------------------------------------------------- */ ++ ++/* ++ * The peripheral clocks. ++ */ ++static struct clk pioA_clk = { ++ .name = "pioA_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_PIOA, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk pioB_clk = { ++ .name = "pioB_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_PIOB, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk pioC_clk = { ++ .name = "pioC_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_PIOC, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk usart0_clk = { ++ .name = "usart0_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_US0, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk usart1_clk = { ++ .name = "usart1_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_US1, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk usart2_clk = { ++ .name = "usart2_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_US2, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk mmc_clk = { ++ .name = "mci_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_MCI, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk udc_clk = { ++ .name = "udc_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_UDP, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk twi_clk = { ++ .name = "twi_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_TWI, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk spi0_clk = { ++ .name = "spi0_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_SPI0, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk spi1_clk = { ++ .name = "spi1_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_SPI1, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk ohci_clk = { ++ .name = "ohci_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_UHP, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++static struct clk lcdc_clk = { ++ .name = "lcdc_clk", ++ .pmc_mask = 1 << AT91SAM9261_ID_LCDC, ++ .type = CLK_TYPE_PERIPHERAL, ++}; ++ ++static struct clk *periph_clocks[] __initdata = { ++ &pioA_clk, ++ &pioB_clk, ++ &pioC_clk, ++ &usart0_clk, ++ &usart1_clk, ++ &usart2_clk, ++ &mmc_clk, ++ &udc_clk, ++ &twi_clk, ++ &spi0_clk, ++ &spi1_clk, ++ // ssc 0 .. ssc2 ++ // tc0 .. tc2 ++ &ohci_clk, ++ &lcdc_clk, ++ // irq0 .. irq2 ++}; ++ ++/* ++ * The four programmable clocks. ++ * You must configure pin multiplexing to bring these signals out. ++ */ ++static struct clk pck0 = { ++ .name = "pck0", ++ .pmc_mask = AT91_PMC_PCK0, ++ .type = CLK_TYPE_PROGRAMMABLE, ++ .id = 0, ++}; ++static struct clk pck1 = { ++ .name = "pck1", ++ .pmc_mask = AT91_PMC_PCK1, ++ .type = CLK_TYPE_PROGRAMMABLE, ++ .id = 1, ++}; ++static struct clk pck2 = { ++ .name = "pck2", ++ .pmc_mask = AT91_PMC_PCK2, ++ .type = CLK_TYPE_PROGRAMMABLE, ++ .id = 2, ++}; ++static struct clk pck3 = { ++ .name = "pck3", ++ .pmc_mask = AT91_PMC_PCK3, ++ .type = CLK_TYPE_PROGRAMMABLE, ++ .id = 3, ++}; ++ ++/* HClocks */ ++static struct clk hck0 = { ++ .name = "hck0", ++ .pmc_mask = AT91_PMC_HCK0, ++ .type = CLK_TYPE_SYSTEM, ++ .id = 0, ++}; ++static struct clk hck1 = { ++ .name = "hck1", ++ .pmc_mask = AT91_PMC_HCK1, ++ .type = CLK_TYPE_SYSTEM, ++ .id = 1, ++}; ++ ++static void __init at91sam9261_register_clocks(void) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) ++ clk_register(periph_clocks[i]); ++ ++ clk_register(&pck0); ++ clk_register(&pck1); ++ clk_register(&pck2); ++ clk_register(&pck3); ++ ++ clk_register(&hck0); ++ clk_register(&hck1); ++} ++ ++/* -------------------------------------------------------------------- ++ * GPIO ++ * -------------------------------------------------------------------- */ ++ ++static struct at91_gpio_bank at91sam9261_gpio[] = { ++ { ++ .id = AT91SAM9261_ID_PIOA, ++ .offset = AT91_PIOA, ++ .clock = &pioA_clk, ++ }, { ++ .id = AT91SAM9261_ID_PIOB, ++ .offset = AT91_PIOB, ++ .clock = &pioB_clk, ++ }, { ++ .id = AT91SAM9261_ID_PIOC, ++ .offset = AT91_PIOC, ++ .clock = &pioC_clk, ++ } ++}; ++ ++static void at91sam9261_reset(void) ++{ ++#warning "Implement CPU reset" ++} ++ ++ ++/* -------------------------------------------------------------------- ++ * AT91SAM9261 processor initialization ++ * -------------------------------------------------------------------- */ ++ ++void __init at91sam9261_initialize(unsigned long main_clock) ++{ ++ /* Map peripherals */ ++ iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); ++ ++ at91_arch_reset = at91sam9261_reset; ++ at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) ++ | (1 << AT91SAM9261_ID_IRQ2); ++ ++ /* Init clock subsystem */ ++ at91_clock_init(main_clock); ++ ++ /* Register the processor-specific clocks */ ++ at91sam9261_register_clocks(); ++ ++ /* Register GPIO subsystem */ ++ at91_gpio_init(at91sam9261_gpio, 3); ++} ++ ++/* -------------------------------------------------------------------- ++ * Interrupt initialization ++ * -------------------------------------------------------------------- */ ++ ++/* ++ * The default interrupt priority levels (0 = lowest, 7 = highest). ++ */ ++static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { ++ 7, /* Advanced Interrupt Controller */ ++ 7, /* System Peripherals */ ++ 0, /* Parallel IO Controller A */ ++ 0, /* Parallel IO Controller B */ ++ 0, /* Parallel IO Controller C */ ++ 0, ++ 6, /* USART 0 */ ++ 6, /* USART 1 */ ++ 6, /* USART 2 */ ++ 0, /* Multimedia Card Interface */ ++ 4, /* USB Device Port */ ++ 0, /* Two-Wire Interface */ ++ 6, /* Serial Peripheral Interface 0 */ ++ 6, /* Serial Peripheral Interface 1 */ ++ 5, /* Serial Synchronous Controller 0 */ ++ 5, /* Serial Synchronous Controller 1 */ ++ 5, /* Serial Synchronous Controller 2 */ ++ 0, /* Timer Counter 0 */ ++ 0, /* Timer Counter 1 */ ++ 0, /* Timer Counter 2 */ ++ 3, /* USB Host port */ ++ 3, /* LCD Controller */ ++ 0, ++ 0, ++ 0, ++ 0, ++ 0, ++ 0, ++ 0, ++ 0, /* Advanced Interrupt Controller */ ++ 0, /* Advanced Interrupt Controller */ ++ 0, /* Advanced Interrupt Controller */ ++}; ++ ++void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS]) ++{ ++ if (!priority) ++ priority = at91sam9261_default_irq_priority; ++ ++ /* Initialize the AIC interrupt controller */ ++ at91_aic_init(priority); ++ ++ /* Enable GPIO interrupts */ ++ at91_gpio_irq_setup(); ++} +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9261_devices.c linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9261_devices.c +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam9261_devices.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91sam9261_devices.c Sat Nov 25 11:14:00 2006 +@@ -0,0 +1,767 @@ ++/* ++ * arch/arm/mach-at91rm9200/at91sam9261_devices.c ++ * ++ * Copyright (C) 2005 Thibaut VARENE ++ * Copyright (C) 2005 David Brownell ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ */ ++#include ++#include ++ ++#include ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "generic.h" ++ ++#define SZ_512 0x00000200 ++#define SZ_256 0x00000100 ++#define SZ_16 0x00000010 ++ ++/* -------------------------------------------------------------------- ++ * USB Host ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) ++static u64 ohci_dmamask = 0xffffffffUL; ++static struct at91_usbh_data usbh_data; ++ ++static struct resource usbh_resources[] = { ++ [0] = { ++ .start = AT91SAM9261_UHP_BASE, ++ .end = AT91SAM9261_UHP_BASE + SZ_1M - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9261_ID_UHP, ++ .end = AT91SAM9261_ID_UHP, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9261_usbh_device = { ++ .name = "at91_ohci", ++ .id = -1, ++ .dev = { ++ .dma_mask = &ohci_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &usbh_data, ++ }, ++ .resource = usbh_resources, ++ .num_resources = ARRAY_SIZE(usbh_resources), ++}; ++ ++void __init at91_add_device_usbh(struct at91_usbh_data *data) ++{ ++ if (!data) ++ return; ++ ++ usbh_data = *data; ++ platform_device_register(&at91sam9261_usbh_device); ++} ++#else ++void __init at91_add_device_usbh(struct at91_usbh_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * USB Device (Gadget) ++ * -------------------------------------------------------------------- */ ++ ++#ifdef CONFIG_USB_GADGET_AT91 ++static struct at91_udc_data udc_data; ++ ++static struct resource udc_resources[] = { ++ [0] = { ++ .start = AT91SAM9261_BASE_UDP, ++ .end = AT91SAM9261_BASE_UDP + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9261_ID_UDP, ++ .end = AT91SAM9261_ID_UDP, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9261_udc_device = { ++ .name = "at91_udc", ++ .id = -1, ++ .dev = { ++ .platform_data = &udc_data, ++ }, ++ .resource = udc_resources, ++ .num_resources = ARRAY_SIZE(udc_resources), ++}; ++ ++void __init at91_add_device_udc(struct at91_udc_data *data) ++{ ++ unsigned long x; ++ ++ if (!data) ++ return; ++ ++ if (data->vbus_pin) { ++ at91_set_gpio_input(data->vbus_pin, 0); ++ at91_set_deglitch(data->vbus_pin, 1); ++ } ++ ++ /* Pullup pin is handled internally */ ++ x = at91_sys_read(AT91_MATRIX_USBPUCR); ++ at91_sys_write(AT91_MATRIX_USBPUCR, x | AT91_MATRIX_USBPUCR_PUON); ++ ++ udc_data = *data; ++ platform_device_register(&at91sam9261_udc_device); ++} ++#else ++void __init at91_add_device_udc(struct at91_udc_data *data) {} ++#endif ++ ++/* -------------------------------------------------------------------- ++ * MMC / SD ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) ++static u64 mmc_dmamask = 0xffffffffUL; ++static struct at91_mmc_data mmc_data; ++ ++static struct resource mmc_resources[] = { ++ [0] = { ++ .start = AT91SAM9261_BASE_MCI, ++ .end = AT91SAM9261_BASE_MCI + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9261_ID_MCI, ++ .end = AT91SAM9261_ID_MCI, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9261_mmc_device = { ++ .name = "at91_mci", ++ .id = -1, ++ .dev = { ++ .dma_mask = &mmc_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &mmc_data, ++ }, ++ .resource = mmc_resources, ++ .num_resources = ARRAY_SIZE(mmc_resources), ++}; ++ ++void __init at91_add_device_mmc(struct at91_mmc_data *data) ++{ ++ if (!data) ++ return; ++ ++ /* input/irq */ ++ if (data->det_pin) { ++ at91_set_gpio_input(data->det_pin, 1); ++ at91_set_deglitch(data->det_pin, 1); ++ } ++ if (data->wp_pin) ++ at91_set_gpio_input(data->wp_pin, 1); ++ if (data->vcc_pin) ++ at91_set_gpio_output(data->vcc_pin, 0); ++ ++ /* CLK */ ++ at91_set_B_periph(AT91_PIN_PA2, 0); ++ ++ /* CMD */ ++ at91_set_B_periph(AT91_PIN_PA1, 1); ++ ++ /* DAT0, maybe DAT1..DAT3 */ ++ at91_set_B_periph(AT91_PIN_PA0, 1); ++ if (data->wire4) { ++ at91_set_B_periph(AT91_PIN_PA4, 1); ++ at91_set_B_periph(AT91_PIN_PA5, 1); ++ at91_set_B_periph(AT91_PIN_PA6, 1); ++ } ++ ++ mmc_data = *data; ++ platform_device_register(&at91sam9261_mmc_device); ++} ++#else ++void __init at91_add_device_mmc(struct at91_mmc_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * NAND / SmartMedia ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_MTD_NAND_AT91) || defined(CONFIG_MTD_NAND_AT91_MODULE) ++static struct at91_nand_data nand_data; ++ ++#define NAND_BASE AT91_CHIPSELECT_3 ++ ++static struct resource nand_resources[] = { ++ { ++ .start = NAND_BASE, ++ .end = NAND_BASE + SZ_256M - 1, ++ .flags = IORESOURCE_MEM, ++ } ++}; ++ ++static struct platform_device at91_nand_device = { ++ .name = "at91_nand", ++ .id = -1, ++ .dev = { ++ .platform_data = &nand_data, ++ }, ++ .resource = nand_resources, ++ .num_resources = ARRAY_SIZE(nand_resources), ++}; ++ ++void __init at91_add_device_nand(struct at91_nand_data *data) ++{ ++ unsigned long csa, mode; ++ ++ if (!data) ++ return; ++ ++ csa = at91_sys_read(AT91_MATRIX_EBICSA); ++ at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC); ++ ++ /* set the bus interface characteristics */ ++ at91_sys_write(AT91_SMC_SETUP(3), AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) ++ | AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); ++ ++ at91_sys_write(AT91_SMC_PULSE(3), AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) ++ | AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5)); ++ ++ at91_sys_write(AT91_SMC_CYCLE(3), AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); ++ ++ if (data->bus_width_16) ++ mode = AT91_SMC_DBW_16; ++ else ++ mode = AT91_SMC_DBW_8; ++ at91_sys_write(AT91_SMC_MODE(3), mode | AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_TDF_(1)); ++ ++ /* enable pin */ ++ if (data->enable_pin) ++ at91_set_gpio_output(data->enable_pin, 1); ++ ++ /* ready/busy pin */ ++ if (data->rdy_pin) ++ at91_set_gpio_input(data->rdy_pin, 1); ++ ++ /* card detect pin */ ++ if (data->det_pin) ++ at91_set_gpio_input(data->det_pin, 1); ++ ++ at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */ ++ at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ ++ ++ nand_data = *data; ++ platform_device_register(&at91_nand_device); ++} ++ ++#else ++void __init at91_add_device_nand(struct at91_nand_data *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * TWI (i2c) ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) ++ ++static struct resource twi_resources[] = { ++ [0] = { ++ .start = AT91SAM9261_BASE_TWI, ++ .end = AT91SAM9261_BASE_TWI + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9261_ID_TWI, ++ .end = AT91SAM9261_ID_TWI, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9261_twi_device = { ++ .name = "at91_i2c", ++ .id = -1, ++ .resource = twi_resources, ++ .num_resources = ARRAY_SIZE(twi_resources), ++}; ++ ++void __init at91_add_device_i2c(void) ++{ ++ /* pins used for TWI interface */ ++ at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */ ++ at91_set_multi_drive(AT91_PIN_PA7, 1); ++ ++ at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */ ++ at91_set_multi_drive(AT91_PIN_PA8, 1); ++ ++ platform_device_register(&at91sam9261_twi_device); ++} ++#else ++void __init at91_add_device_i2c(void) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * SPI ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) ++static u64 spi_dmamask = 0xffffffffUL; ++ ++static struct resource spi0_resources[] = { ++ [0] = { ++ .start = AT91SAM9261_BASE_SPI0, ++ .end = AT91SAM9261_BASE_SPI0 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9261_ID_SPI0, ++ .end = AT91SAM9261_ID_SPI0, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9261_spi0_device = { ++ .name = "atmel_spi", ++ .id = 0, ++ .dev = { ++ .dma_mask = &spi_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = spi0_resources, ++ .num_resources = ARRAY_SIZE(spi0_resources), ++}; ++ ++static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; ++ ++static struct resource spi1_resources[] = { ++ [0] = { ++ .start = AT91SAM9261_BASE_SPI1, ++ .end = AT91SAM9261_BASE_SPI1 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9261_ID_SPI1, ++ .end = AT91SAM9261_ID_SPI1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device at91sam9261_spi1_device = { ++ .name = "atmel_spi", ++ .id = 1, ++ .dev = { ++ .dma_mask = &spi_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = spi1_resources, ++ .num_resources = ARRAY_SIZE(spi1_resources), ++}; ++ ++static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 }; ++ ++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) ++{ ++ int i; ++ unsigned long cs_pin; ++ short enable_spi0 = 0; ++ short enable_spi1 = 0; ++ ++ /* Choose SPI chip-selects */ ++ for (i = 0; i < nr_devices; i++) { ++ if (devices[i].controller_data) ++ cs_pin = (unsigned long) devices[i].controller_data; ++ else if (devices[i].bus_num == 0) ++ cs_pin = spi0_standard_cs[devices[i].chip_select]; ++ else ++ cs_pin = spi1_standard_cs[devices[i].chip_select]; ++ ++ if (devices[i].bus_num == 0) ++ enable_spi0 = 1; ++ else ++ enable_spi1 = 1; ++ ++ /* enable chip-select pin */ ++ at91_set_gpio_output(cs_pin, 1); ++ ++ /* pass chip-select pin to driver */ ++ devices[i].controller_data = (void *) cs_pin; ++ } ++ ++ spi_register_board_info(devices, nr_devices); ++ ++ /* Configure SPI bus(es) */ ++ if (enable_spi0) { ++ at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ ++ at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ ++ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ ++ ++ at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk"); ++ platform_device_register(&at91sam9261_spi0_device); ++ } ++ if (enable_spi1) { ++ at91_set_A_periph(AT91_PIN_PB30, 0); /* SPI1_MISO */ ++ at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */ ++ at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */ ++ ++ at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk"); ++ platform_device_register(&at91sam9261_spi1_device); ++ } ++} ++#else ++void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * LCD Controller ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_FB_AT91) || defined(CONFIG_FB_AT91_MODULE) ++static u64 lcdc_dmamask = 0xffffffffUL; ++static struct at91fb_info lcdc_data; ++ ++static struct resource lcdc_resources[] = { ++ [0] = { ++ .start = AT91SAM9261_LCDC_BASE, ++ .end = AT91SAM9261_LCDC_BASE + SZ_4K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9261_ID_LCDC, ++ .end = AT91SAM9261_ID_LCDC, ++ .flags = IORESOURCE_IRQ, ++ }, ++#if defined(CONFIG_FB_INTSRAM) ++ [2] = { ++ .start = AT91SAM9261_SRAM_BASE, ++ .end = AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++#endif ++}; ++ ++static struct platform_device at91_lcdc_device = { ++ .name = "at91-fb", ++ .id = 0, ++ .dev = { ++ .dma_mask = &lcdc_dmamask, ++ .coherent_dma_mask = 0xffffffff, ++ .platform_data = &lcdc_data, ++ }, ++ .resource = lcdc_resources, ++ .num_resources = ARRAY_SIZE(lcdc_resources), ++}; ++ ++void __init at91_add_device_lcdc(struct at91fb_info *data) ++{ ++ if (!data) { ++ return; ++ } ++ ++ at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ ++ at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ ++ at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ ++ at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ ++ at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ ++ at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ ++ at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */ ++ at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */ ++ at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */ ++ at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */ ++ at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */ ++ at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */ ++ at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */ ++ at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */ ++ at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */ ++ at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */ ++ at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */ ++ at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */ ++ at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */ ++ at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */ ++ at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ ++ at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ ++ ++ lcdc_data = *data; ++ platform_device_register(&at91_lcdc_device); ++} ++#else ++void __init at91_add_device_lcdc(struct at91fb_info *data) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * LEDs ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_LEDS) ++u8 at91_leds_cpu; ++u8 at91_leds_timer; ++ ++void __init at91_init_leds(u8 cpu_led, u8 timer_led) ++{ ++ at91_leds_cpu = cpu_led; ++ at91_leds_timer = timer_led; ++} ++#else ++void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} ++#endif ++ ++ ++#if defined(CONFIG_NEW_LEDS) ++ ++static struct platform_device at91_leds = { ++ .name = "at91_leds", ++ .id = -1, ++}; ++ ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) ++{ ++ if (!nr) ++ return; ++ ++ at91_leds.dev.platform_data = leds; ++ ++ for ( ; nr; nr--, leds++) { ++ leds->index = nr; /* first record stores number of leds */ ++ at91_set_gpio_output(leds->gpio, (leds->flags & 1) == 0); ++ } ++ ++ platform_device_register(&at91_leds); ++} ++#else ++void __init at91_gpio_leds(struct at91_gpio_led *leds, int nr) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- ++ * UART ++ * -------------------------------------------------------------------- */ ++ ++#if defined(CONFIG_SERIAL_ATMEL) ++static struct resource dbgu_resources[] = { ++ [0] = { ++ .start = AT91_VA_BASE_SYS + AT91_DBGU, ++ .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91_ID_SYS, ++ .end = AT91_ID_SYS, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data dbgu_data = { ++ .use_dma_tx = 0, ++ .use_dma_rx = 0, /* DBGU not capable of receive DMA */ ++ .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), ++}; ++ ++static struct platform_device at91sam9261_dbgu_device = { ++ .name = "atmel_usart", ++ .id = 0, ++ .dev = { ++ .platform_data = &dbgu_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = dbgu_resources, ++ .num_resources = ARRAY_SIZE(dbgu_resources), ++}; ++ ++static inline void configure_dbgu_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */ ++ at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */ ++} ++ ++static struct resource uart0_resources[] = { ++ [0] = { ++ .start = AT91SAM9261_BASE_US0, ++ .end = AT91SAM9261_BASE_US0 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9261_ID_US0, ++ .end = AT91SAM9261_ID_US0, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart0_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91sam9261_uart0_device = { ++ .name = "atmel_usart", ++ .id = 1, ++ .dev = { ++ .platform_data = &uart0_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart0_resources, ++ .num_resources = ARRAY_SIZE(uart0_resources), ++}; ++ ++static inline void configure_usart0_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */ ++ at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */ ++ at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */ ++ at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */ ++} ++ ++static struct resource uart1_resources[] = { ++ [0] = { ++ .start = AT91SAM9261_BASE_US1, ++ .end = AT91SAM9261_BASE_US1 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9261_ID_US1, ++ .end = AT91SAM9261_ID_US1, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart1_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91sam9261_uart1_device = { ++ .name = "atmel_usart", ++ .id = 2, ++ .dev = { ++ .platform_data = &uart1_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart1_resources, ++ .num_resources = ARRAY_SIZE(uart1_resources), ++}; ++ ++static inline void configure_usart1_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */ ++ at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */ ++} ++ ++static struct resource uart2_resources[] = { ++ [0] = { ++ .start = AT91SAM9261_BASE_US2, ++ .end = AT91SAM9261_BASE_US2 + SZ_16K - 1, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = AT91SAM9261_ID_US2, ++ .end = AT91SAM9261_ID_US2, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct atmel_uart_data uart2_data = { ++ .use_dma_tx = 1, ++ .use_dma_rx = 1, ++}; ++ ++static struct platform_device at91sam9261_uart2_device = { ++ .name = "atmel_usart", ++ .id = 3, ++ .dev = { ++ .platform_data = &uart2_data, ++ .coherent_dma_mask = 0xffffffff, ++ }, ++ .resource = uart2_resources, ++ .num_resources = ARRAY_SIZE(uart2_resources), ++}; ++ ++static inline void configure_usart2_pins(void) ++{ ++ at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */ ++ at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ ++} ++ ++struct platform_device *at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ ++struct platform_device *atmel_default_console_device; /* the serial console device */ ++ ++void __init at91_init_serial(struct at91_uart_config *config) ++{ ++ int i; ++ ++ /* Fill in list of supported UARTs */ ++ for (i = 0; i < config->nr_tty; i++) { ++ switch (config->tty_map[i]) { ++ case 0: ++ configure_usart0_pins(); ++ at91_uarts[i] = &at91sam9261_uart0_device; ++ at91_clock_associate("usart0_clk", &at91sam9261_uart0_device.dev, "usart"); ++ break; ++ case 1: ++ configure_usart1_pins(); ++ at91_uarts[i] = &at91sam9261_uart1_device; ++ at91_clock_associate("usart1_clk", &at91sam9261_uart1_device.dev, "usart"); ++ break; ++ case 2: ++ configure_usart2_pins(); ++ at91_uarts[i] = &at91sam9261_uart2_device; ++ at91_clock_associate("usart2_clk", &at91sam9261_uart2_device.dev, "usart"); ++ break; ++ case 3: ++ configure_dbgu_pins(); ++ at91_uarts[i] = &at91sam9261_dbgu_device; ++ at91_clock_associate("mck", &at91sam9261_dbgu_device.dev, "usart"); ++ break; ++ default: ++ continue; ++ } ++ at91_uarts[i]->id = i; /* update ID number to mapped ID */ ++ } ++ ++ /* Set serial console device */ ++ if (config->console_tty < ATMEL_MAX_UART) ++ atmel_default_console_device = at91_uarts[config->console_tty]; ++ if (!atmel_default_console_device) ++ printk(KERN_INFO "AT91: No default serial console defined.\n"); ++} ++ ++void __init at91_add_device_serial(void) ++{ ++ int i; ++ ++ for (i = 0; i < ATMEL_MAX_UART; i++) { ++ if (at91_uarts[i]) ++ platform_device_register(at91_uarts[i]); ++ } ++} ++#else ++void __init at91_init_serial(struct at91_uart_config *config) {} ++void __init at91_add_device_serial(void) {} ++#endif ++ ++ ++/* -------------------------------------------------------------------- */ ++ ++/* ++ * These devices are always present and don't need any board-specific ++ * setup. ++ */ ++static int __init at91_add_standard_devices(void) ++{ ++ return 0; ++} ++ ++arch_initcall(at91_add_standard_devices); +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam926x_time.c linux-2.6.19/arch/arm/mach-at91rm9200/at91sam926x_time.c +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/at91sam926x_time.c Thu Jan 1 02:00:00 1970 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/at91sam926x_time.c Mon Nov 20 10:52:16 2006 +@@ -0,0 +1,114 @@ ++/* ++ * linux/arch/arm/mach-at91rm9200/at91sam926x_time.c ++ * ++ * Copyright (C) 2005-2006 M. Amine SAYA, ATMEL Rousset, France ++ * Revision 2005 M. Nicolas Diremdjian, ATMEL Rousset, France ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include ++#include ++#include ++ ++#include ++ ++ ++#define PIT_CPIV(x) ((x) & AT91_PIT_CPIV) ++#define PIT_PICNT(x) (((x) & AT91_PIT_PICNT) >> 20) ++ ++/* ++ * Returns number of microseconds since last timer interrupt. Note that interrupts ++ * will have been disabled by do_gettimeofday() ++ * 'LATCH' is hwclock ticks (see CLOCK_TICK_RATE in timex.h) per jiffy. ++ * 'tick' is usecs per jiffy (linux/timex.h). ++ */ ++static unsigned long at91sam926x_gettimeoffset(void) ++{ ++ unsigned long elapsed; ++ unsigned long t = at91_sys_read(AT91_PIT_PIIR); ++ ++ elapsed = (PIT_PICNT(t) * LATCH) + PIT_CPIV(t); /* hardware clock cycles */ ++ ++ return (unsigned long)(elapsed * 1000000) / LATCH; ++} ++ ++/* ++ * IRQ handler for the timer. ++ */ ++static irqreturn_t at91sam926x_timer_interrupt(int irq, void *dev_id) ++{ ++ volatile long nr_ticks; ++ ++ if (at91_sys_read(AT91_PIT_SR) & AT91_PIT_PITS) { /* This is a shared interrupt */ ++ write_seqlock(&xtime_lock); ++ ++ /* Get number to ticks performed before interrupt and clear PIT interrupt */ ++ nr_ticks = PIT_PICNT(at91_sys_read(AT91_PIT_PIVR)); ++ do { ++ timer_tick(); ++ nr_ticks--; ++ } while (nr_ticks); ++ ++ write_sequnlock(&xtime_lock); ++ return IRQ_HANDLED; ++ } else ++ return IRQ_NONE; /* not handled */ ++} ++ ++static struct irqaction at91sam926x_timer_irq = { ++ .name = "at91_tick", ++ .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER, ++ .handler = at91sam926x_timer_interrupt ++}; ++ ++void at91sam926x_timer_reset(void) ++{ ++ /* Disable timer */ ++ at91_sys_write(AT91_PIT_MR, 0); ++ ++ /* Clear any pending interrupts */ ++ (void) at91_sys_read(AT91_PIT_PIVR); ++ ++ /* Set Period Interval timer and enable its interrupt */ ++ at91_sys_write(AT91_PIT_MR, (LATCH & AT91_PIT_PIV) | AT91_PIT_PITIEN | AT91_PIT_PITEN); ++} ++ ++/* ++ * Set up timer interrupt. ++ */ ++void __init at91sam926x_timer_init(void) ++{ ++ /* Initialize and enable the timer */ ++ at91sam926x_timer_reset(); ++ ++ /* Make IRQs happen for the system timer. */ ++ setup_irq(AT91_ID_SYS, &at91sam926x_timer_irq); ++} ++ ++#ifdef CONFIG_PM ++static void at91sam926x_timer_suspend(void) ++{ ++ /* Disable timer */ ++ at91_sys_write(AT91_PIT_MR, 0); ++} ++#else ++#define at91sam926x_timer_suspend NULL ++#endif ++ ++struct sys_timer at91sam926x_timer = { ++ .init = at91sam926x_timer_init, ++ .offset = at91sam926x_gettimeoffset, ++ .suspend = at91sam926x_timer_suspend, ++ .resume = at91sam926x_timer_reset, ++}; ++ +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-1arm.c linux-2.6.19/arch/arm/mach-at91rm9200/board-1arm.c +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-1arm.c Mon Dec 4 16:39:29 2006 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-1arm.c Thu Nov 23 15:50:12 2006 +@@ -64,7 +64,7 @@ + at91rm9200_init_interrupts(NULL); + } + +-static struct at91_eth_data __initdata onearm_eth_data = { ++static struct eth_platform_data __initdata onearm_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, + }; +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-carmeva.c linux-2.6.19/arch/arm/mach-at91rm9200/board-carmeva.c +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-carmeva.c Mon Dec 4 16:39:29 2006 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-carmeva.c Thu Nov 23 15:50:12 2006 +@@ -65,8 +65,7 @@ + at91rm9200_init_interrupts(NULL); + } + +- +-static struct at91_eth_data __initdata carmeva_eth_data = { ++static struct eth_platform_data __initdata carmeva_eth_data = { + .phy_irq_pin = AT91_PIN_PC4, + .is_rmii = 1, + }; +@@ -89,8 +88,33 @@ + // }; + + static struct at91_mmc_data __initdata carmeva_mmc_data = { +- .is_b = 0, ++ .slot_b = 0, + .wire4 = 1, ++ .det_pin = AT91_PIN_PB10, ++ .wp_pin = AT91_PIN_PC14, ++}; ++ ++static struct spi_board_info carmeva_spi_devices[] = { ++ { /* DataFlash chip */ ++ .modalias = "mtd_dataflash", ++ .chip_select = 0, ++ .max_speed_hz = 10 * 1000 * 1000, ++ }, ++ { /* User accessable spi - cs1 (250KHz) */ ++ .modalias = "spi-cs1", ++ .chip_select = 1, ++ .max_speed_hz = 250 * 1000, ++ }, ++ { /* User accessable spi - cs2 (1MHz) */ ++ .modalias = "spi-cs2", ++ .chip_select = 2, ++ .max_speed_hz = 1 * 1000 * 1000, ++ }, ++ { /* User accessable spi - cs3 (10MHz) */ ++ .modalias = "spi-cs3", ++ .chip_select = 3, ++ .max_speed_hz = 10 * 1000 * 1000, ++ }, + }; + + static void __init carmeva_board_init(void) +@@ -105,10 +129,10 @@ + at91_add_device_udc(&carmeva_udc_data); + /* I2C */ + at91_add_device_i2c(); ++ /* SPI */ ++ at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices)); + /* Compact Flash */ + // at91_add_device_cf(&carmeva_cf_data); +- /* SPI */ +-// at91_add_device_spi(NULL, 0); + /* MMC */ + at91_add_device_mmc(&carmeva_mmc_data); + } +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-csb337.c linux-2.6.19/arch/arm/mach-at91rm9200/board-csb337.c +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-csb337.c Mon Dec 4 16:39:29 2006 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-csb337.c Thu Nov 23 15:50:12 2006 +@@ -68,7 +68,7 @@ + at91rm9200_init_interrupts(NULL); + } + +-static struct at91_eth_data __initdata csb337_eth_data = { ++static struct eth_platform_data __initdata csb337_eth_data = { + .phy_irq_pin = AT91_PIN_PC2, + .is_rmii = 0, + }; +@@ -99,7 +99,7 @@ + + static struct at91_mmc_data __initdata csb337_mmc_data = { + .det_pin = AT91_PIN_PD5, +- .is_b = 0, ++ .slot_b = 0, + .wire4 = 1, + .wp_pin = AT91_PIN_PD6, + }; +@@ -112,6 +112,23 @@ + }, + }; + ++static struct at91_gpio_led csb337_leds[] = { ++ { ++ .name = "led0", ++ .gpio = AT91_PIN_PB0, ++ .trigger = "heartbeat", ++ }, ++ { ++ .name = "led1", ++ .gpio = AT91_PIN_PB1, ++ .trigger = "timer", ++ }, ++ { ++ .name = "led2", ++ .gpio = AT91_PIN_PB2, ++ } ++}; ++ + static void __init csb337_board_init(void) + { + /* Serial */ +@@ -131,6 +148,8 @@ + at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices)); + /* MMC */ + at91_add_device_mmc(&csb337_mmc_data); ++ /* LEDS */ ++ at91_gpio_leds(csb337_leds, ARRAY_SIZE(csb337_leds)); + } + + MACHINE_START(CSB337, "Cogent CSB337") +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-csb637.c linux-2.6.19/arch/arm/mach-at91rm9200/board-csb637.c +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-csb637.c Mon Dec 4 16:39:29 2006 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-csb637.c Thu Nov 23 15:50:12 2006 +@@ -67,7 +67,7 @@ + at91rm9200_init_interrupts(NULL); + } + +-static struct at91_eth_data __initdata csb637_eth_data = { ++static struct eth_platform_data __initdata csb637_eth_data = { + .phy_irq_pin = AT91_PIN_PC0, + .is_rmii = 0, + }; +diff -urN -x CVS linux-2.6.19-final/arch/arm/mach-at91rm9200/board-dk.c linux-2.6.19/arch/arm/mach-at91rm9200/board-dk.c +--- linux-2.6.19-final/arch/arm/mach-at91rm9200/board-dk.c Mon Dec 4 16:39:29 2006 ++++ linux-2.6.19/arch/arm/mach-at91rm9200/board-dk.c Thu Nov 23 15:50:12 2006 +@@ -27,6 +27,7 @@ + #include + #include + #include ++#include + + #include + #include +@@ -39,6 +40,7 @@ + + #include + #include ++#include + + #include "generic.h" + +@@ -71,7 +73,186 @@ + at91rm9200_init_interrupts(NULL); + } + +-static struct at91_eth_data __initdata dk_eth_data = { ++#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) ++#include