From: Ley Foon Tan Date: Fri, 4 Dec 2015 22:21:21 +0000 (-0600) Subject: PCI: altera: Fix error when INTx is 4 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=99496bd2971fc378226ad4413e5b72c4545714bd;p=openwrt%2Fstaging%2Fblogic.git PCI: altera: Fix error when INTx is 4 PCI interrupt lines start at 1, not at 0. So, creates additional one interrupt when register for irq domain. Error when PCIe devices have 4 INTx: WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:280 irq_domain_associate+0x17c/0x1cc() error: hwirq 0x4 is too large for dummy Tested on Ethernet adapter card with multi-functions. Signed-off-by: Ley Foon Tan Signed-off-by: Bjorn Helgaas --- diff --git a/drivers/pci/host/pcie-altera.c b/drivers/pci/host/pcie-altera.c index 072255d5b31c..99da549d5d06 100644 --- a/drivers/pci/host/pcie-altera.c +++ b/drivers/pci/host/pcie-altera.c @@ -467,7 +467,7 @@ static int altera_pcie_init_irq_domain(struct altera_pcie *pcie) struct device_node *node = dev->of_node; /* Setup INTx */ - pcie->irq_domain = irq_domain_add_linear(node, INTX_NUM, + pcie->irq_domain = irq_domain_add_linear(node, INTX_NUM + 1, &intx_domain_ops, pcie); if (!pcie->irq_domain) { dev_err(dev, "Failed to get a INTx IRQ domain\n");