From: Thibaut VARENE Date: Fri, 28 Jul 2017 11:00:54 +0000 (+0200) Subject: ramips: Archer C50v1: support US and EU versions X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=991681cf4946b493048c8ea1cb6227d961b2024d;p=openwrt%2Fstaging%2Fthess.git ramips: Archer C50v1: support US and EU versions For the Archer C50v1, the EU and US versions are differentiated by their respective HW additional version (0x0 for US, 0x2 for EU). The stock web interface checks this field before flashing, making it impossible to flash the current (US) factory image on EU hardware. However the bootloader does not check this field, making it possible to use a single sysupgrade image for both hardware. This patch adds the necessary build bits to generate both EU and US factory images, and renames the target as "Archer C50v1" since there are as of now 3 different versions of Archer C50 (all with different CPUs). Signed-off-by: Thibaut VARENE --- diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index b0eb337a47..f201c9d404 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -42,15 +42,17 @@ define Device/ArcherC20i endef TARGET_DEVICES += ArcherC20i -define Device/ArcherC50 +define Device/ArcherC50v1 $(Device/Archer) DTS := ArcherC50 SUPPORTED_DEVICES := c50 TPLINK_BOARD_ID := ArcherC50 - IMAGES += factory.bin - DEVICE_TITLE := TP-Link ArcherC50 + IMAGES += factory-us.bin factory-eu.bin + IMAGE/factory-us.bin := tplink-v2-image -w 0 + IMAGE/factory-eu.bin := tplink-v2-image -w 2 + DEVICE_TITLE := TP-Link ArcherC50v1 endef -TARGET_DEVICES += ArcherC50 +TARGET_DEVICES += ArcherC50v1 define Device/ArcherMR200 $(Device/Archer)