From: Shiraz Hashim Date: Sun, 8 Jul 2012 01:01:07 +0000 (-0700) Subject: Input: spear_keyboard - generalize keyboard frequency configuration X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=98e4d4d6bcf130cbf5a684c4f98c345f13e2f28c;p=openwrt%2Fstaging%2Fblogic.git Input: spear_keyboard - generalize keyboard frequency configuration Current implementation hard coded keyboard frequency configuration assuming input clock as fixed APB (83 MHz). Generalize the configuration using clock framework APIs. Signed-off-by: Shiraz Hashim Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/keyboard/spear-keyboard.c b/drivers/input/keyboard/spear-keyboard.c index a51cdc75466a..c499387d8735 100644 --- a/drivers/input/keyboard/spear-keyboard.c +++ b/drivers/input/keyboard/spear-keyboard.c @@ -33,13 +33,10 @@ #define INTR_MASK 0x54 /* Register Values */ -/* - * pclk freq mask = (APB FEQ -1)= 82 MHZ.Programme bit 15-9 in mode - * control register as 1010010(82MHZ) - */ -#define PCLK_FREQ_MSK 0xA400 /* 82 MHz */ #define NUM_ROWS 16 #define NUM_COLS 16 +#define MODE_CTL_PCLK_FREQ_SHIFT 9 +#define MODE_CTL_PCLK_FREQ_MSK 0x7F #define MODE_CTL_KEYBOARD (0x2 << 0) #define MODE_CTL_SCAN_RATE_10 (0x0 << 2) @@ -113,8 +110,12 @@ static int spear_kbd_open(struct input_dev *dev) if (error) return error; + /* keyboard rate to be programmed is input clock (in MHz) - 1 */ + val = clk_get_rate(kbd->clk) / 1000000 - 1; + val = (val & MODE_CTL_PCLK_FREQ_MSK) << MODE_CTL_PCLK_FREQ_SHIFT; + /* program keyboard */ - val = MODE_CTL_SCAN_RATE_80 | MODE_CTL_KEYBOARD | PCLK_FREQ_MSK | + val = MODE_CTL_SCAN_RATE_80 | MODE_CTL_KEYBOARD | val | (kbd->mode << MODE_CTL_KEYNUM_SHIFT); writel_relaxed(val, kbd->io_base + MODE_CTL_REG); writel_relaxed(1, kbd->io_base + STATUS_REG);