From: 张鹏 Date: Fri, 16 Oct 2020 10:42:15 +0000 (+0200) Subject: ath79: add support for Qxwlan E558 v2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=987d9028e12f37fcb3ca095efd6ffde6d7007469;p=openwrt%2Fstaging%2Fthess.git ath79: add support for Qxwlan E558 v2 Qxwlan E558 v2 is based on Qualcomm QCA9558 + AR8327. Specification: - 720/600/200 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 8/16 MB of FLASH (SPI NOR) - 2T2R 2.4 GHz (QCA9558) - 3x 10/100/1000 Mbps Ethernet (one port with PoE support) - 4x miniPCIe slot (USB 2.0 bus only) - 1x microSIM slot - 5x LED (4 driven by GPIO) - 1x button (reset) - 1x 3-pos switch - 1x DC jack for main power input (9-48 V) - UART (JP5) and LEDs (J8) headers on PCB Flash instruction: 1.Using tftp mode with UART connection and original LEDE image - Configure PC with static IP 192.168.1.10 and tftp server. - Rename "openwrt-ar71xx-generic-xxx-squashfs-sysupgrade.bin" to "firmware.bin" and place it in tftp server directory. - Connect PC with one of LAN ports, power up the router and press key "Enter" to access U-Boot CLI. - Use the following commands to update the device to LEDE: run lfw - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. 2.Using httpd mode with Web UI connection and original LEDE image - Configure PC with static IP 192.168.1.xxx(2-255) and tftp server. - Connect PC with one of LAN ports,press the reset button, power up the router and keep button pressed for around 6-7 seconds, until leds flashing. - Open your browser and enter 192.168.1.1,You will see the upgrade interface, select "openwrt-ar71xx-generic-xxx-squashfs- sysupgrade.bin" and click the upgrade button. - After that the device will reboot and boot to LEDE. - Wait until all LEDs stops flashing and use the router. Signed-off-by: 张鹏 [cut out of bigger patch, keep swconfig, whitespace adjustments] Signed-off-by: Adrian Schmutzler --- diff --git a/target/linux/ath79/dts/qca9558_qxwlan_e558-v2-16m.dts b/target/linux/ath79/dts/qca9558_qxwlan_e558-v2-16m.dts new file mode 100644 index 0000000000..1df4c5e6b5 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_qxwlan_e558-v2-16m.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9558_qxwlan_e558.dtsi" + +/ { + model = "Qxwlan E558 v2 16M"; + compatible = "qxwlan,e558-v2-16m", "qca,qca9558"; +}; + +&partitions { + partition@70000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x070000 0xf90000>; + }; +}; diff --git a/target/linux/ath79/dts/qca9558_qxwlan_e558-v2-8m.dts b/target/linux/ath79/dts/qca9558_qxwlan_e558-v2-8m.dts new file mode 100644 index 0000000000..30d17d5b05 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_qxwlan_e558-v2-8m.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9558_qxwlan_e558.dtsi" + +/ { + model = "Qxwlan E558 v2 8M"; + compatible = "qxwlan,e558-v2-8m", "qca,qca9558"; +}; + +&partitions { + partition@70000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x070000 0x790000>; + }; +}; diff --git a/target/linux/ath79/dts/qca9558_qxwlan_e558.dtsi b/target/linux/ath79/dts/qca9558_qxwlan_e558.dtsi new file mode 100644 index 0000000000..99f37ac025 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_qxwlan_e558.dtsi @@ -0,0 +1,172 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca955x.dtsi" + +#include +#include + +/ { + aliases { + led-boot = &led_system; + led-failsafe = &led_system; + led-running = &led_system; + led-upgrade = &led_system; + label-mac-device = ð0; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + linux,code = ; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + leds { + compatible = "gpio-leds"; + + wlan { + label = "green:wlan"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led_system: system { + label = "green:system"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + sig1 { + label = "green:sig1"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + sig2 { + label = "green:sig2"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&spi { + status = "okay"; + num-cs = <1>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions: partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x000000 0x040000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x040000 0x010000>; + read-only; + }; + + pridata: partition@50000 { + label = "pri-data"; + reg = <0x050000 0x010000>; + read-only; + }; + + art: partition@60000 { + label = "art"; + reg = <0x060000 0x010000>; + read-only; + }; + }; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + + qca,ar8327-initvals = < + 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ + 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */ + 0x10 0x81000080 /* POWER_ON_STRAP */ + 0x50 0xcc35cc35 /* LED_CTRL0 */ + 0x54 0xca35ca35 /* LED_CTRL1 */ + 0x58 0xc935c935 /* LED_CTRL2 */ + 0x5c 0x03ffff00 /* LED_CTRL3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + 0x94 0x0000007e /* PORT6 STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + pll-data = <0x56000000 0x00000101 0x00001616>; + + phy-handle = <&phy0>; + + mtd-mac-address = <&pridata 0x400>; + mtd-mac-address-increment = <1>; +}; + +ð1 { + status = "okay"; + + pll-data = <0x03000101 0x00000101 0x00001616>; + + mtd-mac-address = <&pridata 0x400>; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +&uart { + status = "okay"; +}; + +&usb_phy0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb_phy1 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 78ec5c6afe..8f528c33cd 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -285,6 +285,11 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:lan" ;; + qxwlan,e558-v2-8m|\ + qxwlan,e558-v2-16m) + ucidef_add_switch "switch0" \ + "0@eth1" "4:lan" "5:lan" "6@eth0" "3:wan" + ;; rosinson,wr818) ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:wan" diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 71dc261b2c..528a63f629 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1475,6 +1475,27 @@ define Device/qihoo_c301 endef TARGET_DEVICES += qihoo_c301 +define Device/qxwlan_e558-v2 + SOC := qca9558 + DEVICE_VENDOR := Qxwlan + DEVICE_MODEL := E558 + DEVICE_PACKAGES := kmod-usb2 +endef + +define Device/qxwlan_e558-v2-16m + $(Device/qxwlan_e558-v2) + DEVICE_VARIANT := v2 (16M) + IMAGE_SIZE := 15936k +endef +TARGET_DEVICES += qxwlan_e558-v2-16m + +define Device/qxwlan_e558-v2-8m + $(Device/qxwlan_e558-v2) + DEVICE_VARIANT := v2 (8M) + IMAGE_SIZE := 7744k +endef +TARGET_DEVICES += qxwlan_e558-v2-8m + define Device/qxwlan_e750a-v4 SOC := ar9344 DEVICE_VENDOR := Qxwlan