From: Flole Systems Date: Mon, 10 Apr 2023 21:36:59 +0000 (+0200) Subject: filogic: add support for Netgear WAX220 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=984786a2f7ec622c99e8c9cdada65d0ea0cf4e0b;p=openwrt%2Fstaging%2Fblogic.git filogic: add support for Netgear WAX220 Hardware -------- SOC: MediaTek MT7986 RAM: 1024MB DDR3 FLASH: 128MB SPI-NAND (Winbond) WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz ETH: Realtek RTL8221B-VB-CG 2.5 N-Base-T PHY with PoE UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC) Installation ------------ 1. Download the OpenWrt initramfs image. Copy the image to a TFTP server 2. Connect the TFTP server to the WAX220. Conect to the serial console, interrupt the autoboot process by pressing '0' when prompted. 3. Download & Boot the OpenWrt initramfs image. $ setenv ipaddr 192.168.2.1 $ setenv serverip 192.168.2.2 $ tftpboot openwrt.bin $ bootm 4. Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade. $ sysupgrade -n Signed-off-by: Flole Systems Signed-off-by: Stefan Agner --- diff --git a/package/boot/uboot-envtools/files/mediatek_filogic b/package/boot/uboot-envtools/files/mediatek_filogic index 9df64791b2b7..881d0c45011a 100644 --- a/package/boot/uboot-envtools/files/mediatek_filogic +++ b/package/boot/uboot-envtools/files/mediatek_filogic @@ -40,6 +40,9 @@ bananapi,bpi-r3) glinet,gl-mt3000) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x80000" "0x20000" ;; +netgear,wax220) + ubootenv_add_uci_config "/dev/mtd5" "0x0" "0x20000" "0x20000" + ;; xiaomi,redmi-router-ax6000-stock) ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x10000" "0x20000" ubootenv_add_uci_sys_config "/dev/mtd2" "0x0" "0x10000" "0x20000" diff --git a/target/linux/mediatek/dts/mt7986b-netgear-wax220.dts b/target/linux/mediatek/dts/mt7986b-netgear-wax220.dts new file mode 100644 index 000000000000..f7da6e3630b9 --- /dev/null +++ b/target/linux/mediatek/dts/mt7986b-netgear-wax220.dts @@ -0,0 +1,288 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) + +/dts-v1/; +#include +#include +#include + +#include "mt7986b.dtsi" + +/ { + #address-cells = <0x2>; + #size-cells = <0x2>; + model = "Netgear WAX220"; + compatible = "netgear,wax220", "mediatek,mt7986b-spim-snand-rfb"; + + aliases { + serial0 = &uart0; + led-boot = &led_power_blue; + led-failsafe = &led_power_amber; + led-running = &led_power_green; + led-upgrade = &led_power_amber; + }; + + gpio-keys { + compatible = "gpio-keys"; + + reset { + gpios = <&pio 9 GPIO_ACTIVE_LOW>; + linux,code = ; + label = "reset"; + }; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + wlan5g_green { + gpios = <&pio 12 GPIO_ACTIVE_LOW>; + label = "green:wlan5g"; + }; + + led_power_amber: power_amber { + gpios = <&pio 15 GPIO_ACTIVE_LOW>; + label = "amber:power"; + }; + + wlan2g_green { + gpios = <&pio 19 GPIO_ACTIVE_HIGH>; + label = "green:wlan2g"; + }; + + led_power_blue: power_blue { + gpios = <&pio 7 GPIO_ACTIVE_HIGH>; + label = "blue:power"; + }; + + led_power_green: power_green { + gpios = <&pio 10 GPIO_ACTIVE_LOW>; + label = "green:power"; + }; + + wlan2g_blue { + gpios = <&pio 1 GPIO_ACTIVE_LOW>; + label = "blue:wlan2g"; + }; + + lan_green { + gpios = <&pio 22 GPIO_ACTIVE_HIGH>; + label = "green:lan"; + }; + + lan_amber { + gpios = <&pio 13 GPIO_ACTIVE_LOW>; + label = "amber:lan"; + }; + + wlan5g_blue { + gpios = <&pio 2 GPIO_ACTIVE_LOW>; + label = "blue:wlan5g"; + }; + }; +}; + +&crypto { + status = "okay"; +}; + +ð { + status = "okay"; + + gmac1: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + phy-handle = <&phy6>; + phy-mode = "2500base-x"; + }; + + mdio: mdio-bus { + #address-cells = <1>; + #size-cells = <0>; + }; +}; + +&mdio { + #address-cells = <1>; + #size-cells = <0>; + phy6: ethernet-phy@6 { + reg = <6>; + reset-assert-us = <100000>; + reset-deassert-us = <100000>; + reset-gpios = <&pio 6 GPIO_ACTIVE_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&pio>; + interrupts = <46 IRQ_TYPE_LEVEL_HIGH>; + }; +}; + + +&pio { + spi_flash_pins: spi-flash-pins-33-to-38 { + mux { + function = "spi"; + groups = "spi0", "spi0_wp_hold"; + }; + conf-pu { + pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; + drive-strength = <8>; + mediatek,pull-up-adv = <0>; /* bias-disable */ + }; + conf-pd { + pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; + drive-strength = <8>; + mediatek,pull-down-adv = <0>; /* bias-disable */ + }; + }; + + wf_2g_5g_pins: wf_2g_5g-pins { + mux { + function = "wifi"; + groups = "wf_2g", "wf_5g"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1", + "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0", + "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8", + "WF1_TOP_CLK", "WF1_TOP_DATA"; + drive-strength = <4>; + }; + }; + + wf_dbdc_pins: wf-dbdc-pins { + mux { + function = "wifi"; + groups = "wf_dbdc"; + }; + conf { + pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4", + "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6", + "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10", + "WF0_TOP_CLK", "WF0_TOP_DATA"; + drive-strength = <4>; + }; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi_flash_pins>; + status = "okay"; + + spi_nand_flash: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spi-nand"; + reg = <0>; + + spi-max-frequency = <20000000>; + spi-tx-buswidth = <4>; + spi-rx-buswidth = <4>; + + partitions: partitions { + #address-cells = <0x1>; + #size-cells = <0x1>; + compatible = "fixed-partitions"; + + partition@5fc0000 { + label = "Traffic"; + reg = <0x5fc0000 0x200000>; + }; + + partition@63c0000 { + label = "NTGRcryptD"; + reg = <0x63c0000 0x500000>; + }; + + partition@580000 { + label = "ubi"; + reg = <0x580000 0x5140000>; + }; + + factory: partition@180000 { + label = "Factory"; + reg = <0x180000 0x200000>; + }; + + partition@69c0000 { + label = "User_data"; + reg = <0x69c0000 0x640000>; + }; + + partition@100000 { + label = "u-boot-env"; + reg = <0x100000 0x80000>; + }; + + partition@68c0000 { + label = "LOG"; + reg = <0x68c0000 0x100000>; + }; + + partition@5ac0000 { + label = "POT"; + reg = <0x5ac0000 0x100000>; + }; + + partition@0 { + label = "BL2"; + read-only; + reg = <0x0 0x100000>; + }; + + partition@5bc0000 { + label = "Language"; + reg = <0x5bc0000 0x400000>; + }; + + partition@61c0000 { + label = "Cert"; + reg = <0x61c0000 0x100000>; + }; + + partition@380000 { + label = "FIP"; + reg = <0x380000 0x200000>; + }; + + partition@56c0000 { + label = "RAE"; + reg = <0x56c0000 0x400000>; + }; + + partition@62c0000 { + label = "NTGRcryptK"; + reg = <0x62c0000 0x100000>; + }; + }; + }; + +}; + +&trng { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&watchdog { + status = "okay"; +}; + +&wifi { + status = "okay"; + pinctrl-names = "default", "dbdc"; + pinctrl-0 = <&wf_2g_5g_pins>; + pinctrl-1 = <&wf_dbdc_pins>; + + mediatek,mtd-eeprom = <&factory 0x0>; +}; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds index 1cb00ce26db3..0ba825fd2b93 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds @@ -9,6 +9,11 @@ case $board in cudy,wr3000-v1) ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" ;; +netgear,wax220) + ucidef_set_led_netdev "eth0" "LAN" "green:lan" "eth0" + ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2g" "phy0-ap0" + ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5g" "phy1-ap0" + ;; xiaomi,redmi-router-ax6000-stock|\ xiaomi,redmi-router-ax6000-ubootmod) ucidef_set_led_netdev "wan" "wan" "rgb:network" "wan" diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index a327a46108ac..8803326b2791 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -11,6 +11,9 @@ mediatek_setup_interfaces() asus,tuf-ax4200) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" eth1 ;; + netgear,wax220) + ucidef_set_interface_lan "eth0" + ;; bananapi,bpi-r3) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 sfp2" "eth1 wan" ;; @@ -66,6 +69,10 @@ mediatek_setup_macs() bananapi,bpi-r3) wan_mac=$(macaddr_add $(cat /sys/class/net/eth0/address) 1) ;; + netgear,wax220) + lan_mac=$(mtd_get_mac_ascii u-boot-env mac) + label_mac=$lan_mac + ;; qihoo,360t7) lan_mac=$(mtd_get_mac_ascii factory lanMac) wan_mac=$(macaddr_add "$lan_mac" 1) diff --git a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac index a3db00f5e8ff..3969a7bfe47d 100644 --- a/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac +++ b/target/linux/mediatek/filogic/base-files/etc/hotplug.d/ieee80211/11_fix_wifi_mac @@ -32,6 +32,11 @@ case "$board" in [ "$PHYNBR" = "0" ] && echo "$addr" > /sys${DEVPATH}/macaddress [ "$PHYNBR" = "1" ] && macaddr_setbit_la $(macaddr_add $addr 1) > /sys${DEVPATH}/macaddress ;; + netgear,wax220) + hw_mac_addr=$(mtd_get_mac_ascii u-boot-env mac) + [ "$PHYNBR" = "0" ] && macaddr_add $hw_mac_addr 2 > /sys${DEVPATH}/macaddress + [ "$PHYNBR" = "1" ] && macaddr_add $hw_mac_addr 3 > /sys${DEVPATH}/macaddress + ;; qihoo,360t7) addr=$(mtd_get_mac_ascii factory lanMac) [ "$PHYNBR" = "0" ] && macaddr_add $addr 2 > /sys${DEVPATH}/macaddress diff --git a/target/linux/mediatek/image/filogic.mk b/target/linux/mediatek/image/filogic.mk index 6323a05de2a6..ae25aee2ed8e 100644 --- a/target/linux/mediatek/image/filogic.mk +++ b/target/linux/mediatek/image/filogic.mk @@ -176,6 +176,22 @@ define Device/glinet_gl-mt3000 endef TARGET_DEVICES += glinet_gl-mt3000 +define Device/netgear_wax220 + DEVICE_VENDOR := Netgear + DEVICE_MODEL := WAX220 + DEVICE_DTS := mt7986b-netgear-wax220 + DEVICE_DTS_DIR := ../dts + DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware + IMAGES := sysupgrade.bin + KERNEL_IN_UBI := 1 + KERNEL := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb + KERNEL_INITRAMFS := kernel-bin | lzma | \ + fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata +endef +TARGET_DEVICES += netgear_wax220 + define Device/mediatek_mt7986a-rfb-nand DEVICE_VENDOR := MediaTek DEVICE_MODEL := MT7986 rfba AP (NAND)