From: David Bauer Date: Fri, 4 Oct 2019 20:28:15 +0000 (+0200) Subject: mac80211: ath10k: fix latency issue for QCA988x X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=97c37f8dd067fd4750a64bcaa639e6d08462060d;p=openwrt%2Fstaging%2Fansuel.git mac80211: ath10k: fix latency issue for QCA988x This backport fixes high latency (>100ms) on the WiFi link when using a QCA988x Wave 1 radio. The ath10k-ct driver is not affected by this bug from my testing, hence why it hasn't been discovered earlier. Signed-off-by: David Bauer --- diff --git a/package/kernel/mac80211/patches/ath/982-ath10k-fix-latency-issue-for-QCA988x.patch b/package/kernel/mac80211/patches/ath/982-ath10k-fix-latency-issue-for-QCA988x.patch new file mode 100644 index 0000000000..3702abb412 --- /dev/null +++ b/package/kernel/mac80211/patches/ath/982-ath10k-fix-latency-issue-for-QCA988x.patch @@ -0,0 +1,42 @@ +From: Miaoqing Pan +Subject: [PATCH] ath10k: fix latency issue for QCA988x +Date: Thu, 29 Aug 2019 10:45:12 +0800 + +Bad latency is found on QCA988x, the issue was introduced by +commit 4504f0e5b571 ("ath10k: sdio: workaround firmware UART +pin configuration bug"). If uart_pin_workaround is false, this +change will set uart pin even if uart_print is false. + +Tested HW: QCA9880 +Tested FW: 10.2.4-1.0-00037 + +Fixes: 4504f0e5b571 ("ath10k: sdio: workaround firmware UART pin configuration bug") +Signed-off-by: Miaoqing Pan +--- + drivers/net/wireless/ath/ath10k/core.c | 15 +++++++++------ + 1 file changed, 9 insertions(+), 6 deletions(-) + +--- a/drivers/net/wireless/ath/ath10k/core.c ++++ b/drivers/net/wireless/ath/ath10k/core.c +@@ -2124,12 +2124,15 @@ static int ath10k_init_uart(struct ath10 + return ret; + } + +- if (!uart_print && ar->hw_params.uart_pin_workaround) { +- ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, +- ar->hw_params.uart_pin); +- if (ret) { +- ath10k_warn(ar, "failed to set UART TX pin: %d", ret); +- return ret; ++ if (!uart_print) { ++ if (ar->hw_params.uart_pin_workaround) { ++ ret = ath10k_bmi_write32(ar, hi_dbg_uart_txpin, ++ ar->hw_params.uart_pin); ++ if (ret) { ++ ath10k_warn(ar, "failed to set UART TX pin: %d", ++ ret); ++ return ret; ++ } + } + + return 0;