From: Ryan Mounce Date: Fri, 17 Mar 2017 04:00:33 +0000 (+1030) Subject: ar71xx: add support for MikroTik hAP ac X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=978998628fe98f8cfc81910b851e5a3dfd316bac;p=openwrt%2Fstaging%2Fdedeckeh.git ar71xx: add support for MikroTik hAP ac This patch adds initial support for the MikroTik RouterBOARD hAP ac (RB962UiGS-5HacT2HnT). All functions are supported except: -SFP cage (eth1) is not working -WLAN LEDs are not working Signed-off-by: Ryan Mounce --- diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index a5b2730603..fdbdddd299 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -249,6 +249,9 @@ rb-952ui-5ac2nd) ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02" ucidef_set_led_wlan "wlan" "WLAN" "rb:blue:wlan" "phy0tpt" ;; +rb-962uigs-5hact2hnt) + ucidef_set_led_timer "user" "USER/SFP" "rb:green:user" "1000" "1000" + ;; rb-2011l|\ rb-2011uas|\ rb-2011uias|\ diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index 3888cbe897..0965d717ee 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -171,6 +171,7 @@ ar71xx_setup_interfaces() rb-750gl|\ rb-751g|\ rb-951g-2hnd|\ + rb-962uigs-5hact2hnt|\ wlr8100|\ wzr-hp-g450h) ucidef_add_switch "switch0" \ diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 8b2cc08269..c8eafa5b0b 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -307,6 +307,7 @@ get_status_led() { rb-941-2nd|\ rb-951ui-2nd|\ rb-952ui-5ac2nd|\ + rb-962uigs-5hact2hnt|\ rb-lhg-5nd|\ rb-mapl-2nd) status_led="rb:green:user" diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 323aa40518..d4afbbcc25 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -127,7 +127,8 @@ case "$FIRMWARE" in ath10kcal_extract "ART" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) ;; - rb-911g-5hpacd) + rb-911g-5hpacd | \ + rb-962uigs-5hact2hnt) ath10kcal_from_file "/sys/firmware/routerboot/ext_wlan_data" 20480 2116 ;; esac diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 63c09871d4..32f3bfbbeb 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -908,6 +908,9 @@ ar71xx_board_detect() { *"RouterBOARD 952Ui-5ac2nD") name="rb-952ui-5ac2nd" ;; + *"RouterBOARD 962UiGS-5HacT2HnT") + name="rb-962uigs-5hact2hnt" + ;; *"RouterBOARD LHG 5nD") name="rb-lhg-5nd" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index f5f37f044d..7a0bbb63b4 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -639,6 +639,7 @@ platform_check_image() { rb-941-2nd|\ rb-951ui-2nd|\ rb-952ui-5ac2nd|\ + rb-962uigs-5hact2hnt|\ rb-lhg-5nd|\ rb-mapl-2nd) return 0 @@ -692,6 +693,7 @@ platform_pre_upgrade() { rb-941-2nd|\ rb-951ui-2nd|\ rb-952ui-5ac2nd|\ + rb-962uigs-5hact2hnt|\ rb-lhg-5nd|\ rb-mapl-2nd) # erase firmware if booted from initramfs diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index 5ee033f57b..5f81ebd7d6 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -930,6 +930,7 @@ config ATH79_MACH_RBSPI bool "MikroTik RouterBOARD SPI-NOR support" select SOC_AR934X select SOC_QCA953X + select SOC_QCA955X select ATH79_DEV_ETH select ATH79_DEV_GPIO_BUTTONS select ATH79_DEV_LEDS_GPIO @@ -942,6 +943,7 @@ config ATH79_MACH_RBSPI MikroTik RouterBOARD mAP lite MikroTik RouterBOARD hAP lite MikroTik RouterBOARD hAP + MikroTik RouterBOARD hAP ac MikroTik RouterBOARD hAP ac lite MikroTik RouterBOARD hEX PoE lite MikroTik RouterBOARD hEX lite diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c index d281bf1a6a..9b4c53a578 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-rbspi.c @@ -5,6 +5,7 @@ * - MikroTik RouterBOARD 941L-2nD * - MikroTik RouterBOARD 951Ui-2nD * - MikroTik RouterBOARD 952Ui-5ac2nD + * - MikroTik RouterBOARD 962UiGS-5HacT2HnT * - MikroTik RouterBOARD 750UP r2 * - MikroTik RouterBOARD 750 r2 * - MikroTik RouterBOARD LHG 5nD @@ -18,6 +19,8 @@ * identifier. * * Copyright (C) 2017 Thibaut VARENE + * Copyright (C) 2016 David Hutchison + * Copyright (C) 2017 Ryan Mounce * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -36,6 +39,8 @@ #include #include +#include + #include #include #include @@ -130,6 +135,7 @@ static struct flash_platform_data rbspi_spi_flash_data = { /* Several boards only have a single reset button wired to GPIO 16 */ #define RBSPI_GPIO_BTN_RESET16 16 +#define RBSPI_GPIO_BTN_RESET20 20 static struct gpio_keys_button rbspi_gpio_keys_reset16[] __initdata = { { @@ -142,6 +148,17 @@ static struct gpio_keys_button rbspi_gpio_keys_reset16[] __initdata = { }, }; +static struct gpio_keys_button rbspi_gpio_keys_reset20[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = RBSPI_KEYS_DEBOUNCE_INTERVAL, + .gpio = RBSPI_GPIO_BTN_RESET20, + .active_low = 1, + }, +}; + /* RB mAP L-2nD gpios */ #define RBMAPL_GPIO_LED_POWER 17 #define RBMAPL_GPIO_LED_USER 14 @@ -235,6 +252,83 @@ static struct gpio_led rb952_leds[] __initdata = { }, }; + +/* RB 962UiGS-5HacT2HnT gpios */ +#define RB962_GPIO_POE_STATUS 2 +#define RB962_GPIO_POE_POWER 3 +#define RB962_GPIO_LED_USER 12 +#define RB962_GPIO_USB_POWER 13 + +static struct gpio_led rb962_leds_gpio[] __initdata = { + { + .name = "rb:green:user", + .gpio = RB962_GPIO_LED_USER, + .active_low = 1, + }, +}; + +static const struct ar8327_led_info rb962_leds_ar8327[] __initconst = { + AR8327_LED_INFO(PHY0_0, HW, "rb:green:port1"), + AR8327_LED_INFO(PHY1_0, HW, "rb:green:port2"), + AR8327_LED_INFO(PHY2_0, HW, "rb:green:port3"), + AR8327_LED_INFO(PHY3_0, HW, "rb:green:port4"), + AR8327_LED_INFO(PHY4_0, HW, "rb:green:port5"), +}; + +static struct ar8327_pad_cfg rb962_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, + .mac06_exchange_dis = true, +}; + +static struct ar8327_pad_cfg rb962_ar8327_pad6_cfg = { + /* Use SGMII interface for GMAC6 of the AR8337 switch */ + .mode = AR8327_PAD_MAC_SGMII, + .rxclk_delay_en = true, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL0, +}; + +static struct ar8327_led_cfg rb962_ar8327_led_cfg = { + .led_ctrl0 = 0xc737c737, + .led_ctrl1 = 0x00000000, + .led_ctrl2 = 0x00000000, + .led_ctrl3 = 0x0030c300, + .open_drain = false, +}; + +static struct ar8327_platform_data rb962_ar8327_data = { + .pad0_cfg = &rb962_ar8327_pad0_cfg, + .pad6_cfg = &rb962_ar8327_pad6_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .port6_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .led_cfg = &rb962_ar8327_led_cfg, + .num_leds = ARRAY_SIZE(rb962_leds_ar8327), + .leds = rb962_leds_ar8327, +}; + +static struct mdio_board_info rb962_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &rb962_ar8327_data, + }, +}; + /* RB wAP-2nD gpios */ #define RBWAP_GPIO_LED_USER 14 #define RBWAP_GPIO_LED_WLAN 11 @@ -685,6 +779,68 @@ static void __init rb750upr2_setup(void) rbspi_952_750r2_setup(flags); } +/* + * Init the hAP ac / 962UiGS-5HacT2HnT hardware (QCA9558). + * The hAP ac has 5 ethernet ports provided by an AR8337 switch. Port 1 is + * assigned to WAN, ports 2-5 are assigned to LAN. Port 0 is connected to the + * SoC, ports 1-5 of the switch are connected to physical ports 1-5 in order. + * The SFP cage is not assigned by default on RouterOS. Extra work is required + * to support this interface as it is directly connected to the SoC (eth1). + * Wireless is provided by a 2.4GHz radio on the SoC (WLAN1) and a 5GHz radio + * attached via PCI (QCA9880). Red and green WLAN LEDs are populated however + * they are not attached to GPIOs, extra work is required to support these. + * PoE and USB output power control is supported. + */ +static void __init rb962_setup(void) +{ + u32 flags = RBSPI_HAS_USB | RBSPI_HAS_POE | RBSPI_HAS_PCI; + + if (rbspi_platform_setup()) + return; + + rbspi_peripherals_setup(flags); + + /* Do not call rbspi_network_setup as we have a discrete switch chip */ + ath79_eth0_pll_data.pll_1000 = 0xae000000; + ath79_eth0_pll_data.pll_100 = 0xa0000101; + ath79_eth0_pll_data.pll_10 = 0xa0001313; + + ath79_register_mdio(0, 0x0); + mdiobus_register_board_info(rb962_mdio0_info, + ARRAY_SIZE(rb962_mdio0_info)); + + ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); + + ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0); + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_register_eth(0); + + /* WLAN1 MAC is HW MAC + 7 */ + rbspi_wlan_init(1, 7); + + if (flags & RBSPI_HAS_USB) + gpio_request_one(RB962_GPIO_USB_POWER, + GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED, + "USB power"); + + /* PoE output GPIO is inverted, set GPIOF_ACTIVE_LOW for consistency */ + if (flags & RBSPI_HAS_POE) + gpio_request_one(RB962_GPIO_POE_POWER, + GPIOF_OUT_INIT_HIGH | GPIOF_ACTIVE_LOW | + GPIOF_EXPORT_DIR_FIXED, + "POE power"); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(rb962_leds_gpio), + rb962_leds_gpio); + + /* This device has a single reset button as gpio 20 */ + ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL, + ARRAY_SIZE(rbspi_gpio_keys_reset20), + rbspi_gpio_keys_reset20); +} + /* * Init the LHG hardware (AR9344). * The LHG 5nD has a single ethernet port connected to PHY0. @@ -781,6 +937,7 @@ static void __init rbmap_setup(void) MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_952, "952-hb", rb952_setup); +MIPS_MACHINE_NONAME(ATH79_MACH_RB_962, "962", rb962_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_750UPR2, "750-hb", rb750upr2_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_LHG5, "lhg", rblhg_setup); MIPS_MACHINE_NONAME(ATH79_MACH_RB_WAP, "wap-hb", rbwap_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index 184d3a71a7..514a20d05f 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -177,6 +177,7 @@ enum ath79_mach_type { ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */ ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */ ATH79_MACH_RB_952, /* MikroTik RouterBOARD 951Ui-2nD / 952Ui-5ac2nD */ + ATH79_MACH_RB_962, /* MikroTik RouterBOARD 962UiGS-5HacT2HnT */ ATH79_MACH_RB_CAP, /* Mikrotik RouterBOARD cAP2nD */ ATH79_MACH_RB_LHG5, /* Mikrotik RouterBOARD LHG5 */ ATH79_MACH_RB_MAP, /* Mikrotik RouterBOARD mAP2nD */ diff --git a/target/linux/ar71xx/image/mikrotik.mk b/target/linux/ar71xx/image/mikrotik.mk index 9b33885e9c..8e84fd40bd 100644 --- a/target/linux/ar71xx/image/mikrotik.mk +++ b/target/linux/ar71xx/image/mikrotik.mk @@ -31,7 +31,7 @@ define Device/rb-nor-flash-16M LOADER_TYPE := elf KERNEL_INSTALL := 1 KERNEL := kernel-bin | lzma | loader-kernel - SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb-lhg-5nd rb-mapl-2nd + SUPPORTED_DEVICES := rb-750-r2 rb-750up-r2 rb-941-2nd rb-951ui-2nd rb-952ui-5ac2nd rb-962uigs-5hact2hnt rb-lhg-5nd rb-mapl-2nd IMAGE/sysupgrade.bin = append-kernel | kernel2minor -s 1024 -e | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef diff --git a/target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch b/target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch index 545de81416..cd91ac3c02 100644 --- a/target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch +++ b/target/linux/ar71xx/patches-4.4/701-MIPS-ath79-add-routerboard-detection.patch @@ -1,6 +1,6 @@ --- a/arch/mips/ath79/prom.c +++ b/arch/mips/ath79/prom.c -@@ -136,6 +136,26 @@ void __init prom_init(void) +@@ -136,6 +136,27 @@ void __init prom_init(void) initrd_end = initrd_start + fw_getenvl("initrd_size"); } #endif @@ -17,6 +17,7 @@ + strstr(arcs_cmdline, "board=H951L") || + strstr(arcs_cmdline, "board=952-hb") || + strstr(arcs_cmdline, "board=953gs") || ++ strstr(arcs_cmdline, "board=962") || + strstr(arcs_cmdline, "board=lhg") || + strstr(arcs_cmdline, "board=map-hb") || + strstr(arcs_cmdline, "board=2011L") ||