From: Edmunt Pienkowsky <roed@onet.eu>
Date: Sat, 21 Oct 2017 09:07:43 +0000 (+0200)
Subject: ramips: fix Youku-YK1 support
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9786b53efb8225f5b6f21921e684b40b9febe61e;p=openwrt%2Fstaging%2Faparcar.git

ramips: fix Youku-YK1 support

Remove the ephy-pins from the ethernet device tree node. The ephy-pins
are useed to controll the ePHY LEDs and this board doesn't have these.
Instead one of the ePHY pins is used in GPIO mode to control the WAN
LED.

Use the switch LED trigger to control the WAN LED. Move the power LED
handling to diag.sh to show the boot status via this LED.

Add the missing kernel packages for USB and microSD card reader to the
default package selection.

Fix the maximum image size value. The board has a 32MByte flash chip.

Fixes: FS#1055

Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
[make the commit message more verbose, remove GPIO pinmux for pins not
used as GPIOs]
Signed-off-by: Mathias Kresin <dev@kresin.me>
---

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 75ab0da741..037331df96 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -461,9 +461,9 @@ zte-q7)
 	set_wifi_led "$board:blue:status"
 	;;
 youku-yk1)
-	ucidef_set_led_default "power" "power" "$board:blue:power" "1"
 	set_wifi_led "$board:blue:air"
 	set_usb_led "$board:blue:usb"
+	ucidef_set_led_switch "wan" "wan" "$board:blue:wan" "switch0" "0x10"
 	;;
 esac
 
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 4411babbf9..3b3c455ba5 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -134,7 +134,8 @@ get_status_led() {
 	wl-330n3g|\
 	wli-tx4-ag300n|\
 	y1|\
-	y1s)
+	y1s|\
+	youku-yk1)
 		status_led="$board:blue:power"
 		;;
 	db-wrt01|\
diff --git a/target/linux/ramips/dts/YOUKU-YK1.dts b/target/linux/ramips/dts/YOUKU-YK1.dts
index d4e3c905b3..8a0e0819ec 100644
--- a/target/linux/ramips/dts/YOUKU-YK1.dts
+++ b/target/linux/ramips/dts/YOUKU-YK1.dts
@@ -96,7 +96,7 @@
 &pinctrl {
 	state_default: pinctrl0 {
 		default {
-			ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+			ralink,group = "i2c", "rgmii1", "ephy", "wled";
 			ralink,function = "gpio";
 		};
 	};
@@ -104,7 +104,6 @@
 
 &ethernet {
 	pinctrl-names = "default";
-	pinctrl-0 = <&ephy_pins>;
 	mtd-mac-address = <&factory 0x4>;
 	mediatek,portmap = "llllw";
 };
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 8eac6f5752..2f3f59e4c6 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -505,8 +505,9 @@ TARGET_DEVICES += y1s
 
 define Device/youku-yk1
   DTS := YOUKU-YK1
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
+  IMAGE_SIZE := $(ralink_default_fw_size_32M)
   DEVICE_TITLE := YOUKU YK1
+  DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-sdhci-mt7620 kmod-usb-ledtrig-usbport
 endef
 TARGET_DEVICES += youku-yk1