From: Imre Kaloz Date: Thu, 27 Nov 2014 14:27:34 +0000 (+0000) Subject: add D-link DGL-5500 A1 support X-Git-Tag: reboot~5223 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=974f286261065f972e4af9065e84e5a8c94942cc;p=openwrt%2Fstaging%2Fchunkeey.git add D-link DGL-5500 A1 support Signed-off-by: Imre Kaloz SVN-Revision: 43401 --- diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index e39a2b9312..c022013f8f 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -49,6 +49,7 @@ get_status_led() { db120) status_led="db120:green:status" ;; + dgl-5500-a1 |\ dhp-1565-a1|\ dir-505-a1 |\ dir-600-a1 |\ diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index 3287e6ce12..e205fd514c 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -248,6 +248,7 @@ wzr-hp-g300nh) ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t" ;; +dgl-5500-a1 |\ dir-825-c1) local mac ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index a802258817..483a8ded87 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -342,6 +342,9 @@ ar71xx_board_detect() { *"DB120 reference board") name="db120" ;; + *"DGL-5500 rev. A1") + name="dgl-5500-a1" + ;; *"DHP-1565 rev. A1") name="dhp-1565-a1" ;; diff --git a/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k b/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k new file mode 100644 index 0000000000..c5c60efd57 --- /dev/null +++ b/target/linux/ar71xx/base-files/lib/preinit/82_patch_ath10k @@ -0,0 +1,37 @@ +#!/bin/sh + +. /lib/functions/system.sh +. /lib/ar71xx.sh + +firmware_file="/lib/firmware/ath10k/QCA988X/hw2.0/firmware-3.bin" +firmware_md5_orig="5163aa8de591f80b06c77f22e9777473" +firmware_md5_current="$(md5sum $firmware_file)" +firmware_md5_current="${firmware_md5_current%% *}" + + +do_patch_ath10k_firmware() { + # verify md5sum before patching + [ "firmware_md5_orig" != "firmware_md5_current" ] || { + return + } + + # some boards have bogus mac in otp, patch the default mac in the firmware + case $(ar71xx_board_name) in + dgl-5500-a1) + local mac + mac=$(mtd_get_mac_ascii nvram wlan1_mac) + + cp $firmware_file /tmp/ath10k-firmware.bin + macaddr_2bin $mac | dd of=/tmp/ath10k-firmware.bin \ + conv=notrunc bs=1 seek=280 count=6 + + ;; + esac + [ -f /tmp/ath10k-firmware.bin ] || { + return + } + cp /tmp/ath10k-firmware.bin $firmware_file + rm /tmp/ath10k-firmware.bin +} + +boot_hook_add preinit_main do_patch_ath10k_firmware diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 6a85d01df3..2e5b0dd90a 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -194,6 +194,7 @@ platform_check_image() { ap81 | \ ap83 | \ ap132 | \ + dgl-5500-a1 |\ dhp-1565-a1 |\ dir-505-a1 | \ dir-600-a1 | \ diff --git a/target/linux/ar71xx/config-3.14 b/target/linux/ar71xx/config-3.14 index e5086afaa4..9ed184b160 100644 --- a/target/linux/ar71xx/config-3.14 +++ b/target/linux/ar71xx/config-3.14 @@ -42,6 +42,7 @@ CONFIG_ATH79_MACH_CAP4200AG=y CONFIG_ATH79_MACH_CARAMBOLA2=y CONFIG_ATH79_MACH_CPE510=y CONFIG_ATH79_MACH_DB120=y +CONFIG_ATH79_MACH_DGL_5500_A1=y CONFIG_ATH79_MACH_DHP_1565_A1=y CONFIG_ATH79_MACH_DIR_505_A1=y CONFIG_ATH79_MACH_DIR_600_A1=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-dgl-5500-a1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-dgl-5500-a1.c new file mode 100644 index 0000000000..91b554e527 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-dgl-5500-a1.c @@ -0,0 +1,150 @@ +/* + * D-Link DGL-5500 board support + * + * Copyright (C) 2014 Gabor Juhos + * Copyright (C) 2014 Imre Kaloz + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include + +#include + +#include "common.h" +#include "pci.h" +#include "dev-gpio-buttons.h" +#include "dev-eth.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define DGL_5500_A1_GPIO_LED_POWER_ORANGE 14 +#define DGL_5500_A1_GPIO_LED_POWER_GREEN 19 +#define DGL_5500_A1_GPIO_LED_PLANET_GREEN 22 +#define DGL_5500_A1_GPIO_LED_PLANET_ORANGE 23 + +#define DGL_5500_A1_GPIO_BTN_WPS 16 +#define DGL_5500_A1_GPIO_BTN_RESET 17 + +#define DGL_5500_A1_KEYS_POLL_INTERVAL 20 /* msecs */ +#define DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL \ + (3 * DGL_5500_A1_KEYS_POLL_INTERVAL) + +#define DGL_5500_A1_WMAC_CALDATA_OFFSET 0x1000 + +#define DGL_5500_A1_LAN_MAC_OFFSET 0x04 +#define DGL_5500_A1_WAN_MAC_OFFSET 0x16 + +static struct gpio_led dgl_5500_a1_leds_gpio[] __initdata = { + { + .name = "d-link:green:power", + .gpio = DGL_5500_A1_GPIO_LED_POWER_GREEN, + .active_low = 1, + }, + { + .name = "d-link:orange:power", + .gpio = DGL_5500_A1_GPIO_LED_POWER_ORANGE, + .active_low = 1, + }, + { + .name = "d-link:green:planet", + .gpio = DGL_5500_A1_GPIO_LED_PLANET_GREEN, + .active_low = 1, + }, + { + .name = "d-link:orange:planet", + .gpio = DGL_5500_A1_GPIO_LED_PLANET_ORANGE, + .active_low = 1, + }, +}; + +static struct gpio_keys_button dgl_5500_a1_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DGL_5500_A1_GPIO_BTN_RESET, + .active_low = 1, + }, + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = DGL_5500_A1_KEYS_DEBOUNCE_INTERVAL, + .gpio = DGL_5500_A1_GPIO_BTN_WPS, + .active_low = 1, + }, +}; + +static struct ar8327_pad_cfg dgl_5500_a1_ar8327_pad0_cfg = { + /* Use the SGMII interface for the GMAC0 of the AR8327 switch */ + .mode = AR8327_PAD_MAC_SGMII, + .sgmii_delay_en = true, +}; + +static struct ar8327_platform_data dgl_5500_a1_ar8327_data = { + .pad0_cfg = &dgl_5500_a1_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, +}; + +static struct mdio_board_info dgl_5500_a1_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &dgl_5500_a1_ar8327_data, + }, +}; + +static void __init dgl_5500_a1_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1ffe0000); + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 lan_mac[ETH_ALEN]; + + ath79_parse_ascii_mac(mac + DGL_5500_A1_LAN_MAC_OFFSET, lan_mac); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(dgl_5500_a1_leds_gpio), + dgl_5500_a1_leds_gpio); + ath79_register_gpio_keys_polled(-1, DGL_5500_A1_KEYS_POLL_INTERVAL, + ARRAY_SIZE(dgl_5500_a1_gpio_keys), + dgl_5500_a1_gpio_keys); + + ath79_register_wmac(art + DGL_5500_A1_WMAC_CALDATA_OFFSET, lan_mac); + + ath79_register_mdio(0, 0x0); + mdiobus_register_board_info(dgl_5500_a1_mdio0_info, + ARRAY_SIZE(dgl_5500_a1_mdio0_info)); + + ath79_init_mac(ath79_eth1_data.mac_addr, lan_mac, 0); + + /* GMAC1 is connected to an AR8327N switch via the SMGII interface */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth1_data.phy_mask = BIT(0); + ath79_eth1_data.mii_bus_dev = &ath79_mdio0_device.dev; + + ath79_eth1_pll_data.pll_1000 = 0x03000101; + + ath79_register_eth(1); + + ath79_register_usb(); + ath79_register_pci(); +} + +MIPS_MACHINE(ATH79_MACH_DGL_5500_A1, "DGL-5500-A1", "D-Link DGL-5500 rev. A1", + dgl_5500_a1_setup); diff --git a/target/linux/ar71xx/generic/profiles/d-link.mk b/target/linux/ar71xx/generic/profiles/d-link.mk index 5079af1ff5..0909df5e17 100644 --- a/target/linux/ar71xx/generic/profiles/d-link.mk +++ b/target/linux/ar71xx/generic/profiles/d-link.mk @@ -126,3 +126,15 @@ define Profile/DIR835A1/Description endef $(eval $(call Profile,DIR835A1)) + + +define Profile/DGL5500A1 + NAME:=D-Link DGL-5500 rev. A1 + PACKAGES:=kmod-usb-core kmod-usb2 kmod-ath10k +endef + +define Profile/DIR5500A1/Description + Package set optimized for the D-Link DGL-5500 rev. A1. +endef + +$(eval $(call Profile,DGL5500A1)) diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 1c78898d9d..c94db14a31 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -279,6 +279,7 @@ cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro, cpe510_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware) eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) +dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy) cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig) esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) @@ -448,6 +449,10 @@ Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtd Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536) Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout)) +Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26) +Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout)) Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26) Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout)) @@ -1160,6 +1165,8 @@ $(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712B $(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA")) $(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,"")) +$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00")) + $(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) $(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) $(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) diff --git a/target/linux/ar71xx/patches-3.14/733-MIPS-ath79-add-DGL-5500-A1.patch b/target/linux/ar71xx/patches-3.14/733-MIPS-ath79-add-DGL-5500-A1.patch new file mode 100644 index 0000000000..714d9e6edd --- /dev/null +++ b/target/linux/ar71xx/patches-3.14/733-MIPS-ath79-add-DGL-5500-A1.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -40,6 +40,7 @@ enum ath79_mach_type { + ATH79_MACH_CPE510, /* TP-LINK CPE510 */ + ATH79_MACH_DB120, /* Atheros DB120 reference board */ + ATH79_MACH_PB44, /* Atheros PB44 reference board */ ++ ATH79_MACH_DGL_5500_A1, /* D-link DGL-5500 rev. A1 */ + ATH79_MACH_DHP_1565_A1, /* D-Link DHP-1565 rev. A1 */ + ATH79_MACH_DIR_505_A1, /* D-Link DIR-505 rev. A1 */ + ATH79_MACH_DIR_600_A1, /* D-Link DIR-600 rev. A1 */ +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -55,6 +55,7 @@ obj-$(CONFIG_ATH79_MACH_BHU_BXU2000N2_A) + obj-$(CONFIG_ATH79_MACH_CAP4200AG) += mach-cap4200ag.o + obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o + obj-$(CONFIG_ATH79_MACH_DB120) += mach-db120.o ++obj-$(CONFIG_ATH79_MACH_DGL_5500_A1) += mach-dgl-5500-a1.o + obj-$(CONFIG_ATH79_MACH_DHP_1565_A1) += mach-dhp-1565-a1.o + obj-$(CONFIG_ATH79_MACH_DIR_505_A1) += mach-dir-505-a1.o + obj-$(CONFIG_ATH79_MACH_DIR_600_A1) += mach-dir-600-a1.o +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -293,6 +293,16 @@ config ATH79_MACH_WPE72 + select ATH79_DEV_USB + select MYLOADER + ++config ATH79_MACH_DGL_5500_A1 ++ bool "D-Link DGL-5500 A1 support" ++ select SOC_QCA955X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_WMAC ++ select ATH79_DEV_USB ++ + config ATH79_MACH_DHP_1565_A1 + bool "D-Link DHP-1565 rev. A1 board support" + select SOC_AR934X