From: Rafał Miłecki <zajec5@gmail.com>
Date: Sat, 27 Feb 2010 12:03:32 +0000 (+0100)
Subject: b43: N-PHY: add some registers and structs definitions
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9734485c8d2064f39ff77acf615e87da0766ce76;p=openwrt%2Fstaging%2Fblogic.git

b43: N-PHY: add some registers and structs definitions

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---

diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index b8807fb12c92..3a003e6803a5 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -104,6 +104,7 @@
 #define B43_MMIO_MACFILTER_CONTROL	0x420
 #define B43_MMIO_MACFILTER_DATA		0x422
 #define B43_MMIO_RCMTA_COUNT		0x43C
+#define B43_MMIO_PSM_PHY_HDR		0x492
 #define B43_MMIO_RADIO_HWENABLED_LO	0x49A
 #define B43_MMIO_GPIO_CONTROL		0x49C
 #define B43_MMIO_GPIO_MASK		0x49E
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index 403aad3f894f..47d20dcafbf6 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -711,6 +711,8 @@
 #define B43_NPHY_PAPD_EN1			B43_PHY_N(0x29B) /* PAPD Enable1 TBD */
 #define B43_NPHY_EPS_TABLE_ADJ1			B43_PHY_N(0x29C) /* EPS Table Adj1 TBD */
 
+#define B43_PHY_B_BBCFG				B43_PHY_N_BMODE(0x001) /* BB config */
+#define B43_PHY_B_TEST				B43_PHY_N_BMODE(0x00A)
 
 
 /* Broadcom 2055 radio registers */
@@ -924,6 +926,13 @@
 
 struct b43_wldev;
 
+struct b43_chanspec {
+	u8 channel;
+	u8 sideband;
+	u8 b_width;
+	u8 b_freq;
+};
+
 struct b43_phy_n_iq_comp {
 	s16 a0;
 	s16 b0;
diff --git a/drivers/net/wireless/b43/tables_nphy.h b/drivers/net/wireless/b43/tables_nphy.h
index 9c1c6ecd3672..b23036f7dc19 100644
--- a/drivers/net/wireless/b43/tables_nphy.h
+++ b/drivers/net/wireless/b43/tables_nphy.h
@@ -4,6 +4,15 @@
 #include <linux/types.h>
 
 
+struct b43_phy_n_sfo_cfg {
+	u16 phy_bw1a;
+	u16 phy_bw2;
+	u16 phy_bw3;
+	u16 phy_bw4;
+	u16 phy_bw5;
+	u16 phy_bw6;
+};
+
 struct b43_nphy_channeltab_entry {
 	/* The channel number */
 	u8 channel;