From: Alan Stern Date: Wed, 23 Feb 2011 20:28:18 +0000 (-0500) Subject: USB: serial drivers need to use larger bulk-in buffers X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=969e3033ae7733a0af8f7742ca74cd16c0857e71;p=openwrt%2Fstaging%2Fblogic.git USB: serial drivers need to use larger bulk-in buffers When a driver doesn't know how much data a device is going to send, the buffer size should be at least as big as the endpoint's maxpacket value. The serial drivers don't follow this rule; many of them request only 256-byte bulk-in buffers. As a result, they suffer overflow errors if a high-speed device wants to send a lot of data, because high-speed bulk endpoints are required to have a maxpacket size of 512. This patch (as1450) fixes the problem by using the driver's bulk_in_size value as a minimum, always allocating buffers no smaller than the endpoint's maxpacket size. Signed-off-by: Alan Stern Tested-by: Flynn Marquardt CC: [after .39-rc1 is out] Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 546a52179bec..2ff90a9c8f47 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -911,9 +911,8 @@ int usb_serial_probe(struct usb_interface *interface, dev_err(&interface->dev, "No free urbs available\n"); goto probe_error; } - buffer_size = serial->type->bulk_in_size; - if (!buffer_size) - buffer_size = le16_to_cpu(endpoint->wMaxPacketSize); + buffer_size = max_t(int, serial->type->bulk_in_size, + le16_to_cpu(endpoint->wMaxPacketSize)); port->bulk_in_size = buffer_size; port->bulk_in_endpointAddress = endpoint->bEndpointAddress; port->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL); diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index c9049139a7a5..45f3b9db4258 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -191,7 +191,8 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data) * @id_table: pointer to a list of usb_device_id structures that define all * of the devices this structure can support. * @num_ports: the number of different ports this device will have. - * @bulk_in_size: bytes to allocate for bulk-in buffer (0 = end-point size) + * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer + * (0 = end-point size) * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size) * @calc_num_ports: pointer to a function to determine how many ports this * device has dynamically. It will be called after the probe()