From: Icenowy Zheng <icenowy@aosc.xyz>
Date: Fri, 17 Mar 2017 21:23:15 +0000 (+0800)
Subject: ARM: sun8i: a23/a33: drop bl_en_pin GPIO pinmux in reference design DTSI
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=9693219aa61dc7a75ac015e5c011e889cb821eec;p=openwrt%2Fstaging%2Fblogic.git

ARM: sun8i: a23/a33: drop bl_en_pin GPIO pinmux in reference design DTSI

The bl_en_pin GPIO pinmux is configured as "gpio_in", which makes it
conflicts with the real GPIO usage (out), and makes the backlight not
usable.

Drop the GPIO pinmux for it, thus this GPIO can be correctly used.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---

diff --git a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
index 7097c18ff487..d6bd15898db6 100644
--- a/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
+++ b/arch/arm/boot/dts/sun8i-reference-design-tablet.dtsi
@@ -50,8 +50,6 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-		pinctrl-names = "default";
-		pinctrl-0 = <&bl_en_pin>;
 		pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>;
 		brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
 		default-brightness-level = <8>;
@@ -93,11 +91,6 @@
 };
 
 &pio {
-	bl_en_pin: bl_en_pin@0 {
-		pins = "PH6";
-		function = "gpio_in";
-	};
-
 	mmc0_cd_pin: mmc0_cd_pin@0 {
 		pins = "PB4";
 		function = "gpio_in";