From: John Crispin Date: Wed, 22 Aug 2012 09:10:24 +0000 (+0000) Subject: add led defintion for the WR2543 5GHz WLAN LED X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=968ac3fd03e567b47259ff47d7d9ba6d73ac6f05;p=openwrt%2Fstaging%2Fyousong.git add led defintion for the WR2543 5GHz WLAN LED Signed-off-by: Andy Leiserson SVN-Revision: 33215 --- diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c index c650e5a610..d48d8fdd07 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr2543n.c @@ -24,6 +24,10 @@ #define TL_WR2543N_GPIO_LED_WPS 0 #define TL_WR2543N_GPIO_LED_USB 8 +// The WLAN LEDs use GPIOs on the discrete AR9380 wmac +#define TL_WR2543N_GPIO_WMAC_LED_WLAN2G 0 +#define TL_WR2543N_GPIO_WMAC_LED_WLAN5G 1 + #define TL_WR2543N_GPIO_BTN_RESET 11 #define TL_WR2543N_GPIO_BTN_WPS 12 @@ -54,6 +58,14 @@ static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = { } }; +static struct gpio_led tl_wr2543n_wmac_leds_gpio[] = { + { + .name = "tp-link:green:wlan5g", + .gpio = TL_WR2543N_GPIO_WMAC_LED_WLAN5G, + .active_low = 1, + }, +}; + static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = { { .desc = "reset", @@ -113,7 +125,14 @@ static void __init tl_wr2543n_setup(void) tl_wr2543n_gpio_keys); ath79_register_usb(); - ap9x_pci_setup_wmac_led_pin(0, 0); + // The ath9k driver uses this pin for its default led device, which is + // named ath9k-phy0, and reflects activity on either the 2 GHz or 5 GHz + // bands. This pin is connected to the WR2543's 2GHz WLAN LED. + ap9x_pci_setup_wmac_led_pin(0, TL_WR2543N_GPIO_WMAC_LED_WLAN2G); + // We also have the driver set up an led device for the WR2543's + // separate 5 GHz WLAN LED in case the user wants it. + ap9x_pci_setup_wmac_leds(0, tl_wr2543n_wmac_leds_gpio, + ARRAY_SIZE(tl_wr2543n_wmac_leds_gpio)); ap91_pci_init(eeprom, mac); ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);